[b]non English Charcters Became Inverted[/b]
had problem in writing arabic inside macromedia flash mx 2004
when writing arabic text field
in the run time it goes inverted
can any one help me in that
Tek-Tips > Adobe(Macromedia): Flash Forum
Posted on: 12 Feb 06 14:02
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Questions About Animating Charcters In FMX
Hello,
I have a question about Animating a Character.(I'm fairly new to flash.. if you should know) You see, I've animated them before, but what I want to know is what I should use to make the animation run more smoothly.
I have drawen 2 stick figures fighting before, just by doing it frame by frame, but it doesn't seem to run that smooth. I have increased and dinked around with the fps and stuff, but with no luck its still not that smooth.
Would Motion Tweening or Motion guide work better? or are those just for shapes and stuff?
I don't understand actionscript that well yet, so I can't really do anything with the AS, as for I can't even figure out how to write my own code.(always gives me a **** error ).
Also, I wanted to know if there was a way to, lets say...
My 2 stick figures are fighting and I want to slow a couple frames down to get it a slow motion effect, how would I do that?
Thanks
Cylix
Questions About Animating Charcters In FMX
Hello,
I have a question about Animating a Character.(I'm fairly new to flash.. if you should know) You see, I've animated them before, but what I want to know is what I should use to make the animation run more smoothly.
I have drawen 2 stick figures fighting before, just by doing it frame by frame, but it doesn't seem to run that smooth. I have increased and dinked around with the fps and stuff, but with no luck its still not that smooth.
Would Motion Tweening or Motion guide work better? or are those just for shapes and stuff?
I don't understand actionscript that well yet, so I can't really do anything with the AS, as for I can't even figure out how to write my own code.(always gives me a **** error ).
Also, I wanted to know if there was a way to, lets say...
My 2 stick figures are fighting and I want to slow a couple frames down to get it a slow motion effect, how would I do that?
Thanks
Cylix
Inverted Masking
I want to make a mask that makes the area masked on the masked layer invisible. So you can look through the masked layer and see the background of the movie....
Is there a actionscript solution for dooing this ....?
Inverted Text
I have a simple piece of text with a basic effect that I am trying to insert into a website. When I run the page with the text on, the text appears upside down about nine times out of ten. If I hit refresh the text corrects itself. The website is in Frontpage 2002 and I am using Swish v2.
Any help appreciated!
Inverted Text
is there a way to make text have the inverted colors of the pictures behind it? or anything else to make my title a little better that would be simple to do? its at the top of this web page--> http://www.nineclicks.com
Inverted Play();
Hi there...
well, how can i do a inverted play in flash? I've 2 buttons, 1 with this code.
on (rollOver) {
Play();
}
on (rollOut) {
Stop();
}
and at frame 60 i've a stop code... i wanna do a button that make play of the frame 60 to frame 1 renew... 60.59.58.57... etc... that execute the mc of back to front.
Tks for help..
Inverted Masking
This one can probably be answered type fast (like yes or no fast ).
Is there anyway to invert a masking layer so that where there is content, that is where you see through?
I'm trying to get a shape that's of a certain size (after script) to be the see through point, making it so that IT was inverted (IE: that it has content were there is none, and none where there is some) would involve me rethinking my AS, so I figured to avoid that, and for future use, I'd ask...
Inverted Mask
hi,
just wondering if anyone knows of a way to make an inverted mask- the opposite of a reg. mask.
thanks,
f_yipper
Inverted Colors
Okay, so my problem is a little difficult to explain.
I have shapes, that are black, and when they cross I want them to turn white, ONLY in the area the shapes cross
Can this be done in action script? or do I need to key frame this?
My flash knowledge stops when it comes to action script.
I will want to motion tween the black shapes to rotate back and forth and Can I run action script on a movie clip of the black shape (line) so when another black shape or line crosses the point at which they intersect becomes white, and only there.
So that's the best amount of clarification I can give you, If you need pictures to help understand, I can upload some.
Thanks in advance
Tactical
Percentages Inverted
Right a maths question here... i'm sure there's a simple solution but i just can see it... if i have this graph and point x has a value of -235. i can do the calculation(235/300) so i know that point x is 0.78 (or 78%) away from the end point 300. If x gets closer to -300 then the percentage increases... fine.
Code:
|------x--------------|---------------------|
-300 0 300
But what is the maths to make the percentage decrease the further away from the center. This is really bugging me cos i just can't see the answer. This is particularly related to some actionscript so an actionscript solution is fine, but plain maths is just as good.
Cheers if anyone can help
Jimmy
Inverted Colors.
When I import a JPG using loadMovie(), the resulting image is completely discolored, I'm thinking inverted. How can I remedy this? The actual JPG file is fine.
Inverted Masks
Is there an easy way to programatically create an inverted mask? I have a large sprite with a smaller sprite on top. If I mask the large sprite with the smaller sprite it gets trimmed to the small sprite's dimension. What if I wanted the larger sprite to appear to have a hole cut out of it the size of the small sprite?
Inverted Masking?
Hi all,
Is it possible to invert the way masking works in flash? Normally when u have a mask layer it shows content in places where it is filles and hides everything else. I need it to be the other way around. Is it possible?
Inverted ScrollPane Component?
I think the scrollpane component is great, but I need the horizontal scrollbar to appear at the TOP of the pane, not the bottom.
I tried dragging an instance to the stage and then flipping it vertically, but that procudure also flips the contents of the pane.
Isn't there some way to modify the component so that the horiz scrollbar will appear on top of the pane?
Thanx in advance!
- Cone
How Can I Get My Image List To Not Be Inverted?
OK, making steady progress on this thing but now, when I load my image list from an XML file, my onLoadInit's are firing off in reverse order and my image list is showing up in reverse order.
Is there a way to get the list in the right order?
Math Help: Inverted Values?
I'm trying to adjust my alphas where the further away from zero, the lighter my alpha becomes.
For example:
0=100% alpha
12.66 = 0% alpha
What's the math that can make that work?
Thank you,
Layne
Arrays And Inverted Commas
Hi Guys
If I have an array which contains elements which don't have inverted commas how do I write the code to dynamically change it into one that does?
eg change contents of array
(apples,oranges,pears)
into
("apples","oranges","pears")
and vice versa
I would be very grateful for your help, please.
Cheers
Crossy
Possible To Create An Inverted Mask?
Sorry if this has been answered already, but I couldn't find anything in the forums or in the help.
Is it possible to create a mask that knocks out its silhouette from the below layer, instead of revealing the union of the two layers? Imagine using two circles of different sizes, and having the smaller circle punch through the larger, creating a donut.
Anyone know how to make this work?
Inverted Mouse Follow ..
Hi there,
How would I 'invert' the "mouse follow with easing" code bellow - So that my mouse follow is mirrored? ie: when the mouse is at the bottom x=10 y=-50, the MC is at placement is x=-10 y=50 (thus the top) .
I am trying to create a moving camera presence with a subtle lighting fx, that reacts to mouse placement.
onClipEvent (load) {
_x = 0;
_y = 0;
speed = 5;
}
onClipEvent (enterFrame) {
endX = _root._xmouse;
endY = _root._ymouse;
_x += (endX-_x)/speed;
_y += (endY-_y)/speed;
}
Help anyone ? This should be easy stuff - I just havent made it there yet!
Thanks!!!
Inverted Mask (cutout)?
hi, i have had a look around on the forums to see if I could find a solution but couldnt find one.
Is it possible now with flash 8 to create a mask that cuts out from an object?
I thought the blend (Subtract) options might do it but no.
What i want to do is have a background image (which will be several loaded images), with a block of colour over them, and then some text which is cut out of the coloured block to reveal some of the image below.
I dont want to have to copy/duplicate the image movieclips to create this effect.
is it possible (even with bitmapData)?
thanks
Mouse Inverted Follower
Hi guys,
I want to ask you if you could help me to create inverted mouse follower with easing. I have code which is classic mouse follower w/easing
Code:
this.onEnterFrame = function() {
var endX:Number = _root._xmouse;
var endY:Number = _root._ymouse;
this._x += (endX-_x)/5;
this._y += (endY-_y)/5;
};
but I want to have inverted fuction with it, so the MC will go on opposite side as mouse. Could anybody help me?
Thanks everyone!!
cr3n
Movie Clip Inverted
I have added a behavior to a button that will place an exported flash file onto the main stage. but for some reason when I open the exported file it is inverted (upside down).
Any help would be appreciated
Inverted Trig Functions In Flash 5?
Does anyone know how to do inverted trigonometry functions in Flash 5? I mean like the ones that say cos -1 etc. on calculator buttons?
I need this do work out some angles.
Weird Problem. File Edits In Inverted Colors And Outlines.
I was working on a file earlier today and stepped away from my computer for a while. When I came back, all of the text was inverted colors, bitmap images were just showing outlines and shapes weren't showing up at all. I closed the file, rebooted the computer and brought it back up. The colors were still like that. I went to View>Preview Mode and tried all of the options in there to no avail. I opened another file and it worked just fine. Has anyone ever seen a problem like this? How do I fix it? I'm using Flash CS3.
English?
i got a computer from my friend in brazil. it has flash mx loaded, but no way to get the disk and no idea how to change the overall language settings to english. please help! i posted this but i cant see my post anywhere, hope it shows up in the newbie section!!
Not In English OoOp's
Finished my swif.movie and when I put it in the default browser for playback my english was in another language (turkish) what can I do to see it in English!!
Outlook (bad English)
Hello
I am Portuguese and have a very bad English
I need help to create a button that opens outlook already with the inserted email.
Thanck and kisses from Portugal!
Sónia
Outlook (bad English)
Outlook (bad English)
Hello
I am Portuguese and have a very bad English
I need help to create a button that opens outlook already with the inserted email.
Thanck and kisses from Portugal!
Sónia
Outlook (bad English)
Outlook (bad English)
Hello
I am Portuguese and have a very bad English
I need help to create a button that opens outlook already with the inserted email.
Thanck and kisses from Portugal!
Sónia
English Lesson
Hello children.
Been making a concerted effort to learn actionscript and have a quick question:
I understand how to say:
if this is so, go and do this, for example:
onClipEvent (enterFrame) {
if (_root._xmouse>650){
this.nextFrame();
}}
But how to I say if this is so AND this is so, go and do this (if _xmouse>650 AND _ymouse<30 go and do this)?
Thanks for your help
ActionScript Into English
Can someone put this ActionScript into English. I've been away from Flash for about 3 years, and trying to make sense of scripting again. Thanks
_root.control._y=_root.control._y-10;
if(_root.control._y<=-(control._height/2)){
_root.control._y=500+(_root.control_height/2);
}
Ian
Non-english Keyboard
Hi. I have a german keyboard .
This is the code
stage.addEventListener(KeyboardEvent.KEY_DOWN,onKe yPressed);
function onKeyPressed(event:KeyboardEvent)
{
trace(event.keyCode)
trace(event.charCode)
}
It work for d,y,w,g,x,., , ,;,', and THAT'S IT (and of course special keys defined in Keyboard class )
In fact works for any letter if I press SHIFT .
Any ideeas ?
Thanks
Can Anyone Translate Me This In English
FLASH [MX] SHOUTBOX
Deze scriptjes zorgen ervoor dat je je eigen flash shoutbox op je site kan maken.
De scripts zijn aan te passen aan je eigen smaak (ik heb bijvoorbeeld de laatste 50
shouts, maar dit kunnen er ook 100 zijn, of gewoon alle shouts laten zien).
Om de shoutbox werkend te maken moet je een aantal dingen doen:
- Je moet een tabel aanmaken mbv phpmyadmin
- Je moet je config.php aanpassen aan je database naam ed
STAP 1: TABEL AANMAKEN
Om een tabel aan te maken in phpmyadmin moet je natuurlijk eerst een MySQL database hebben.
Er zijn een aantal gratis hosts te vinden die php en MySQL aanbieden, maar deze zijn niet echt
aan te raden.
Maar geen nood: je kan je eigen servertje opzetten met behulp van een handig pakketje.
Je moet naar http://www.firepages.com.au gaan, en dan de PHPDEV BUNDLE downloaden. Deze bevat alles
wat je nodig hebt:
- PHP
- MySQL
- Apache SERVER
- PHPMYADMIN
Als je het geinstalleerd hebt, dan kun je je server starten door phpdev_start.bat uit te voeren
Hierna kun je via je browser naar het adres http://localhost gaan.
Om de shoutbox te installeren ga je eerst naar de map phpmyadmin -> index.php
Hier kun je je eigen databases ed aanmaken.
Kies een naam voor je database (ik raad aan om de naam shoutbox te gebruiken, dan kun je namelijk
stap 2 overslaan ), en maak deze aan.
Klik op je database in het linker gedeelte en maak de volgende tabel aan (kopieren en plakken in het
SQL UITVOEREN TEKSTVELD):
CREATE TABLE shoutbox (
id int(11) NOT NULL auto_increment,
date int(11),
name varchar(255) NOT NULL,
shout tinytext NOT NULL,
PRIMARY KEY (id)
);
Hierna ben je klaar met het aanmaken van de database en de bijbehorende tabel.
Kopieer nu alle scripts en fla bestanden naar de map phpdev/www/public. DOE JE DIT NIET, DAN MOET JE JE
FLASH BESTAND AANPASSEN IVM ANDERE LOAD ACTIONS.
Als het goed is kun je nu via localhost naar het volgende adres gaan:
http://localhost/public/config.php
Krijg je een soort van error? Mooi, lees de volgende stap dan maar:
Als je een leeg scherm krijgt dan heet je database waarschijnlijk al shoutbox, en hoef je stap 2
niet te volgen.
Wil je dat andere mensen op jouw server kunnen komen, dan moet je ipv http://localhost/public
http://JEIPADRES/public doorgeven.
STAP 2: CONFIG.PHP AANPASSEN (INDIEN NODIG)
Nu moet je nog je scripts een beetje gaan aanpassen. Open config.php en wijzig het bestand:
<?
$dburl="localhost";
$db="shoutbox"; // DIT MOET JE WIJZIGEN, TENZIJ JOUW DATABASE OOK SHOUTBOX HEET
mysql_connect("$dburl") or die("&error=ERROR: CAN'T CONNECT&content=SEE ERROR DETAILS");
mysql_select_db("$db") or die("&error=ERROR: CAN'T SELECT DB&content=SEE ERROR DETAILS");
?>
Ok, klaar met de scripts. Probeer eens naar http://localhost/public/config.php te gaan. Je krijgt een
leeg scherm. Nee? Dan doe je iets verkeerd, lees even de vorige stappen nog door.
Nu moet het werken. Werkt het niet? Dan kun je me altijd een mailtje sturen.
Mzzls,
Menno
void@flashfreaks.nl
Non-English Characters
Hi All,
We can get whether a character is English or not from its ASCII value.
Is there any other way in actionscript to find if the character is non-english or english?
Thanks,
Manish
Flashblog In English?
Anyone know if flashblog.org is in english anywhere? Or if someone has an english version of the files?
thnxs,
adam
Flashblog In English?
Anyone know if flashblog.org is in english anywhere? Or if someone has an english version of the files?
thnxs,
adam
Using Non-English Languages In Flash MX
Greetings. I have a potential project coming up where the client wants the entire site in flash, and in eight languages:
French, English, Chinese, Spanish, German, Russian, Italian, Greek
I've seen flash movies in most of these languages, but my question is this: at this stage, what does one have to keep in mind to be able to work with flash movies in these languages? I'm especially concerned about Chinese - it is as simple as embedded fonts, or is it much more complicated? I would be happy to hear from those to have produced sites in any of the above languages (besides English, of course) and what problems they encountered.
Many thanks in advance.
WS
Non-english Characters In Code
Good day all,
Does any of you FlashMX specialists know how i get foreign characters right in the ActionScript?
In an Action Script i had an output text "% loaded" which in French is "chargé".
As i typed it in the script it looked OK but as i looked the final result the E with the accent had changed into a strange sign.
I know that for external .txt files one should save them in unicode but what about the foreign characters in the code? How do i get them right in the final result?
And i don't see why the output shows it as a foreign character since it accepts it and shows it as intended in the script.
I use my computer bi-lingual: system and most programs also Flash are in English version and my keyboard is "French" azerty, the primary input language is set on French (i have that flag on the menu). I don't have this problem other then in Flash and sometimes in French language mail i receive, but that's a decoding problem between the sender and me.
When i make a text field in Flash, i can use the é è à etc. And it shows correctly in the final result. But when i want to have output text directly in the code it doesn't show as it should in the final result. Is this a Flash related problem at all or is this a system thing (i'm on OSX)? Does it make any sense?
I appreciate your help folks
have a nice day
Working With Non English Characters
Hi there,
anyone with experience working with non- english characters using OSX? The problem is to display dynamic text in foreign language specified in HTML within the actionscript. Please help-
Thanks
Lee Bosh
Non-English Text Input
Hi,
I am building a guestbook in flash, and I want to allow the users to be able to enter languages such as chinese, japanese and etc. I've tested my guestbook, and right now, I am able to copy&paste chinese into the text fields, however, if I try to type any non-english in there, they just become random codes or disappear.
Any idea how I can fix this??
Thanks in advance
Al
Non English Dynamic Text
Hello.. there was a post here a few weeks ago on embedding non latin characters.. I had a quick search but I couldn't find it.. so if anyone can give me some info I would be grateful..
I have a file importing xml to use as variables.. the trouble is this has to me multi language.
I'm using English flash on a Japanese machine and I've even tried Japanese flash on a Japanese machine.. but when I use dymanic text from xml the characters just don't display.. If I you static text its ok.. if I use dynamic text but type in flash its ok.. but if I import the variables form an xml file it doesn't work.. can anyone give me any suggestions??
Translation From English To Actionscript
Hello everyone !
I would need a button with the following action:
"when my button is pressed, play the current scene AND once you've come to its end (at frame 50), play scene number 2"...
If you think this is correct:
on (release) {
gotoAndPlay (1);
}
... and then redirecting to scene 2 when the scene has reached frame 50, well, you're wrong...
Because I also need another button (in the same scene as before) that says:
"when my button is pressed, play the current scene AND once you've come to its end (at frame 50), play scene number 3" !
I mean, each button will have to play the scene but the play will later be redirected to a different scene !
Can anyone help me please ???
Thanks a lot in advance !!!
Input Field In Non-English
hi,
i'm trying to input text using another language other than English and put it in SQL database.
is it possible to enable the Flash input field to be able to read those foreign text (like Thai) and capture it in the database?
many thanks.
Php - Flash (english Version)
i made a drop down menu in flash, that is calling data fro mysql.
the menu is like this:
imagine:
+-------------------+
| Company |
+-------------------+
| about us |
| |
| |
| |
| |
+-------------------+
when i pass the mouse on the button company show the sublink about us..
the text about us is in the database. the about us is a dynamic text box that is called like word, and the
getURL(url) is like this.
the code in php that i've made is like this:
$hConn = OpenConnection($Server, $UserName, $db_password);
$menu = new clsRecordset;
$sql="Select * from menus_paginas inner join menus_paginas_linguas on menus_paginas_linguas.ID_PAI = menus_paginas.ID where menus_paginas.ID_PAI= 4 and Lang='$lang' ORDER BY menus_paginas.Ordem";
$hRes= $menu->Open( $hConn, $DBName, $sql);
if($hRes)
{
while(!$menu->EOF())
{
?>
object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="780" height="228" valign=top>
param name="allowScriptAccess" value="sameDomain">
param name="movie" value="templates/uniscala2.swf?empresa=<?php echo $menu->aFields["Nome"];?>&url=<? echo $menu->aFields["Pagina"];?>">
<param name="wmode" value="transparent">
<param name="quality" value="high">
<param name="bgcolor" value="#ffffff">
<embed src="<?php echo "templates/uniscala2.swf?empresa=".$menu->aFields["Nome"]."&url=".$menu->aFields["Pagina"];?>" quality="high" wmode="transparent" bgcolor="#ffffff" width="780" height="228" valign=top allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer">
</object
?>
$menu->next();
}
}
?>
if you see the code is calling the values, if i go to the database and add a new field it should appear like this:
+-------------------+
| Company |
+-------------------+
| about us |
| new field |
| |
| |
| |
+-------------------+
but if you see in the code, the menu will repeat him self to appear the new field;
like this:
+-------------------+
| Company |
+-------------------+
| about us |
| |
| |
| |
| |
+-------------------+
+-------------------+
| Company |
+-------------------+
| new field |
| |
| |
| |
| |
+-------------------+
what i wish is that you explain to me, a way that when every time i add a new field in the data, the flash creat a new button, calling the new field instead of repeating him self.
help me please.....thanks.
Timer For Non-english Game
hi. i got a script off this website but its not in english...
Im using flash 8
Quote:
function treffer(obj, pkt) {
// wenn flugobjekt von sprungobjekt getroffen
// dann punkte vergeben und wieder nach links positionieren
if (obj.hitTest(_root.objekt.mund)) {
if (obj.kind == "moehre") {
// Punkte hochzählen
_root.punkte = _root.punkte + (pkt*2);
}
if (obj.kind == "traube") {
// Punkte hochzählen
_root.punkte = _root.punkte + pkt;
}
if (obj.kind == "pilz" and _root.punkte <> 0) {
// Punkte hochzählen
_root.punkte =Math.ceil (_root.Punkte/2);
_root.objekt.pilz =true;
}
// Sprungobjekt sagen, dass es wieder nach unten fliegen soll
_root.objekt.spring = 2;
_root.objekt.treffer = true;
// Flugobjekte wieder an ihrer Ausgangsposition positionieren
if (obj.startwo == "links") {
obj._x = -22;
} else {
obj._x = 660;
}
// startvariable vorsichtshalber auf Null setzen, damit das Ding nicht gleich wieder losfliegt
obj.start_this =0;
}
}
function bewege(obj) {
// gesteuert per random wandert das flugobjekt von links nach rechts
if (obj.start_this <> 1) {
obj.start_this = random(15);
obj.wohin = random(15);
if (obj.wohin < 3) {
obj.gotoAndStop(3);
} else if (obj.wohin > 3 and obj.wohin < 8) {
obj.gotoAndStop(2);
} else {
obj.gotoAndStop(1);
}
} else {
if (obj.startwo == "rechts") {
obj._x = obj._x - 11;
}
if (obj.startwo == "links") {
obj._x = obj._x + 11;
}
}
// wenn das flugobjekt über den Rand hinaus ist, soll es wieder zu seinem Ausgangspunkt zurück
if (obj.startwo == "links" and obj._x > 666) {
obj._x = -33;
obj.start_this =2;
}
if (obj.startwo == "rechts" and obj._x < 0) {
obj._x = 660;
obj.start_this =2;
}
}
_root.punkte = 0;
My game came out like this, not understanding the script.
http://media.putfile.com/Peach--Glide-and-Grab
Well. Now the real problem is i want to add on a timer. so that when the timer
runs out you go to the time over screen. can anybody tell me where to put allof this time AS?
[F8] HELP Bullets Stick In Non-English
I've got a text box (using _sans, html on) loading html from xml (utf-16) files and, when I load English text with the <li> tag, it works fine. When I load Russian or Korean text with the <li> tag, the field suddenly marks EVERY line with a bullet and it sticks and I can't make the bullets go away...
HELP!!!!
I attached an fla and several xml files so you can see what I'm talking about. Also, the Korean doesn't display in the field...not sure why. It works in our actual application, but we're loading the xml files using SWF Studio, but we have the same bullet issue...
This has been driving me crazy all weekend, and I'm about to throw in the towel...
Edit: I should clarify, when you select Rus or Kor bullets, the first time it loads, it displays fine. When you load ANY other file (even one with no list tags), it puts all the bullets on the fields...
[F8] Switching From English To Spanish In Xml
So, my developers threw some spanish into our content XML and now the XML won't load. Take the special Spanish characters (Ááó) out and it loads just fine. I found one reference that suggested switching the encoding to UTF-8, but it still ignores most of the content.
What am I missing?
|
TRACKER
