Drag & Drop - "if" Drag's = Drops Script

Multiple Drag And Drops
im attempting to make a square than i can drag and drop but i can also duplicate multiple times....its difficult to explain so i'll explain the final result...
im attempting to make a drag and drop interface with furniture. using a grid system as the flooring(the targets) and square tiles(the dropers) that i will attatch to the bottom of the furniture so if you place the furniture on the grid it will snap to the grid.

here is the swf of the furniture and the grid:
http://www.culturalelite.cjb.net/swf/fur_system.swf

and the fla. file i was attempting to figure out the codeing for dragging and dropping in a dynamic sense but now im baffled.
http://www.culturalelite.cjb.net/swf/drag1.fla


if anyone could help me i would really appreiate it
thanks
mallrat68

---

Dynamic Drag And Drops
Hi There,

I've just tried the tutorial on dynamic drag and drop but mine doesn't work. Specifically the first initialising function doesn't initialise.

MX did have a problem with the script on movieclips calling script from other movieclips so i moved it all to a script layer but i have checked with the syntax checker and there don't appear to be any errors.

Here is my code:
function initialize(){
// setting global variables
_root.howmany = 4;
_root.targetX = 90;
_root.targetY = 90;
_root.objectX = 450;
_root.objectY = 90;
_root.spacing = 50;

// setting arrays
cover = new Array();
target_array = new Array();
object_array = new Array();
}

function placement(){
for (i=0; i<_root.howmany; i++){
this._parent.attachMovie("target","t"+i,i);
this.parent.attachMovie("object","o"+i,i+_root.how many);

_root["t"+i]._x = _root.targetX;
_root["t"+i]._y = _root.targetY;

_root["o"+i]._x = _root.objectX;
_root["o"+i]._y = _root.objectY;

_root.targetY = _root.targetY + _root.spacing;
_root.objectY = _root.objectY + _root.spacing;
}
}

function x_y(my_x,my_y) {
this.my_x = my_x;
this.my_y = my_y;
}

function setcoords(){
for (var i=0; i<_root.howmany; i++){
target_array[i] = new x_y (getProperty(_root["t"+i],_x),getProperty(_root["t"+i],_y));
object_array[i] = new x_y (getProperty(_root["o"+i],_x),getProperty(_root["o"+i],_y));
cover[i] = 0
}
}

function clearscreen(){
for (i=0; i<_root.howmany; i++){
_root["t"+i].unloadMovie();
_root["o"+i].unloadMovie();
}
}

initialize.call();
placement.call();
setcoords.call();

stop();

Am i missing something glaringly obvious? I am quite new to scripting so be gentle!

---

A Question About Drag And Drops?
I am using flash mx to make a test that has 5 dragable objects but only two targets. I only want one object to be allowed in the target object at a time. After the dragable object has been dropped into the target object the student would evaluate thier question with a submitt button. I have gotten the target object to only allow one dragable object to be placed there. The problem is when I try to allow that object to be dragged to either of the two target objects the code does not work. It works if there is only one target object though. Can anyone help?

---

(1)drag Drop In 3 (2)drag Dropin 3 ...print 3 Contents (1)+(2)
i want to do the following.

drag (dynamic text file link)1 of choice of x text file links
into an area where all text file links can then be printed..(the text file itself)


[1] [2] [3] [4] [5]...


(basket)


drag drop [1] then [2] then [3] then [4] into (basket)

then print textfiles related to [1] [2] [3] [4]

if sombody could point me to a good tutorial or help me on my way?

thanx

---

Creating Drag And Drops That Only Allow One Object In Each Box
Hi All,

I have 8 drag and drop objects I have created, that can be dragged to any one of seven spots. This is where the trouble arises though. Because any of the objects can go to any of the spots my code has to allow for that, and it does, but Im having trouble trying to stop the user being able to drop two different items on the one spot.
i.e Once an item has been dropped on a spot then no more items can be dropped there.

Im using hitTest and have tried making the 'spot' movie clips invisible, to no avail, I cant seem to delete them or remove them either. I dont wanna get into complicated booleans here, there must be a better way, but Im really stuck.

Thanx in advance for any help,
Dwayne

---

[F8] Drag And Drops With Completetion Message
Hi,

I have 3 drag and drop movie clips I am working with, simply drag them over another and then they disappear.

After all 3 have disappeared I would like something to happen, either a finish message or a direct link to the next page of my website. I am having trouble finding tutorials/solutions for this online, can anyone help me with this?

The actions on my Movie Clips are,


Quote:




on (press) {

//Start Dragging Movieclip Behavior
startDrag(this);
//End Behavior

}

on (release) {
stopDrag ();
if (this._droptarget == "/a_stop") {
_root.a_stop.gotoAndPlay("play");
}
if (this._droptarget == "/a_stop") {
_root.a_moves.gotoAndPlay("play");
}

}




Then when 'a_moves' is dragged over 'a_stop', 'a_moves' fades away, repeat this with 2 others, A B and C, and then I am stuck with an ending script which detects when all 3 have been successfully dragged and faded.

Thanks in advance for any help given.

---

Mouse_Leave Event For Drag N Drops
Hey everyone-
I;m trying to learn how to do drag n drops in as3. I have followed a tutorial online, and it works great. However everytime i click on the movieclip to drag it, and then accidentally drag the cursor outside of the flash movie, the drag and drop will get messed up. The dragging MC will stick to the cursor even after i have released it. If i press the mouse down on the stage again, then the MC will drop where ever I clicked when it is not supposed to do that. I have followed the example exactly from this website:
http://monkeyflash.com/tutorials/flash-drag-and-drop/

However, I do not know how to use the MOUSE_LEAVE event to somehow tell the movie clip to stop dragging when the user accidentally drags outside the flash movie and to then snap that movie clip back to its original location. Or would i even use this event?...I;m not sure. From what i've read online, this is a common problem but i havent seen any solutions. Please help.
Thanks.

---

Drag Abd Drop, Rollover When Drag Is Over Drop Target?
Hi, im using Flash MX 2004.

I am building a drag and drop, and I have a MC that can be dragged around the stage. The trouble im having is trying to make the drop location do something when i drag the MC over/off it.

I have the following code which works.

objectToDrag.onMouseMove = function() {
if ((objectToDrag.hitTest(dropper)) && (component._beingDragged == true)) {
dropper._alpha = 50;
temp++;
trace("working"+temp);
}
}

This will make the clip i am dragging the draggable MC over change alpha, but for the life of me I cant figure out how to get the alpha to change BACK, after the draggable MC is taken away from the 'dropper'.

Is there a better way that hitTest??

Cheerz,
Dwayne

---

Create 1 Drag For Mutiple Drops (targets)
I need help Creating 1 drag for Mutiple drops. Example of code below.

I want to drag fruit into multiple (targets) containers that lock. Fruit can have multiple correct targets. I can this this to work 1-on-1 but not mulitple. Thanks!

---------------
// Create 1 drag for Mutiple drop functionality

fruit_mc.onPress = function() {
this.startDrag();
};
fruit_mc.onRelease = function() {
this.stopDrag();
if (this.hitTest(_root.fruit_targ_mc)) {
this._x=555.6;
this._y=123.5;
_root.drag_txt.htmlText = "<b>Correct!";

} else if (this.hitTest(_root.start_targ_mc)) {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
} else {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
}
};

fruit_mc.onPress = function() {
this.startDrag();
};
fruit_mc.onRelease = function() {
this.stopDrag();
if (this.hitTest(_root.apple_targ_mc)) {
this._x=555.6;
this._y=123.5;
_root.drag_txt.htmlText = "<b>Correct!";

} else if (this.hitTest(_root.start_targ_mc)) {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
} else {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
}
};

fruit_mc.onPress = function() {
this.startDrag();
};
fruit_mc.onRelease = function() {
this.stopDrag();
if (this.hitTest(_root.chair_targ_mc)) {
this._x=555.6;
this._y=123.5;
_root.drag_txt.htmlText = "<b>Correct!";

} else if (this.hitTest(_root.start_targ_mc)) {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
} else {
this._x=556.6;
this._y=302.4;
_root.drag_txt.htmlText = "<b>Incorrect</b><br>Please Try again!";
}
};

---

How To Make A Drag'n'drop Change Mid Drag?
Help! I already know the script to make a Movie Clip drag and droppable.
But how do I make it switch to a different Movie Clip in the middle of being dragged?
Please please help.

---

Tabable Drag N Drops & Writing To Text Files
can drag & drop objects be tabable, the results of which need to be sent... somewhere any clues anybody.

---

Drag And Drop MC, Involves Polygonal Boundary, Drop Into Trash.
Hello. This is my desperate problem:

I am creating a circuit diagram designer.
There is basically instructions on the left, in a scrolling textbox (taken care of) and above that a rectangle with a bunch of components in it.

You need to be able to drag the circuit part from the side bar (a duplicate, so that the original remains in the same spot), and to a square on the grid on the stage of this program(Should snap to place...). Each clone should be able to be moved. Like so: You Press on a MC to drag it, the thing you are dragging to the stage is of course a clone. You release the mouse button, so it drops on the grid. It snaps into place. *Oops, you made a mistake. You press on it again, it is draged by your mouse to another square, and does not make a clone. *mind Changes... I dont want to use this one any more. You press on the MC, drag it to a bin which animates to show you the MC is being dragged over it. You release, the MC in question is deleted/removed...

You need to be able to rotate circuit parts by clicking on it so that it highlights, then pressing space bar.

It must also be possible to delete a duplicate by dragging it to the trash (an image/ MC), and last but not least, it is required to save the contents of the stage, or print them off.

Please note that to print it off, there are 2 input boxes outside the stage. One for the title, and one for the Users' Name. When they click on the print button, the two dynamic text fields must retrieve the values from the box outside of the programs' stage.

One Last detail: The cloned objects to be dragged around net to be in a six co-ordinate polygonal boundary, so that no-one can place any objects outside of the stage.

If anyone can help me, i would greatly appriciate it. I need to get this done asap. The graphics have been taken care of, it is just the coding to be done now. HELP, HELP PLEASE!




Thanks - Matt K

---

Drag&Drop Duplicate Movie With Drop Target
Hi There...

I'm creating a game where people can design their own cell phone by adding diamonds to it, a "Bling Phone" if you will. You will be able to add 4 types of diamonds to it, change the phones skin, add music to it, give it a name etc etc

I've got it to a stage where it when you click on a diamond(mc) on the stage it duplicates a hidden diamond(mc with a button inside) off stage and you can drag it around etc and then click save. Theres a script which grabs the instance name, x and y position of every diamond on the stage and stores it into a multi dimensional array which will be fed into a mysql database for retreival purposes at a later date.

Now my problem is i would like to be able to use the phone(mc) as a drop target but i'm not sure where to put the droptarget script. does it go on the original MC diamond or the duplicated mc diamond with the button inside it ?

Once a diamond has been dropped onto the phone i would also like it if the user then drags the diamond off the phone it gets deleted. I think i've got it half working but my variables which keep track how many diamonds are on stage dont appear to be updating.

I've attached the .fla file to this post if some is interested in taking a look and helping me out. The droptarget script is only on the blue diamond so far.

Any help would be much appreciated.

Thanks

Rob

---

Drag And Drop - Multiple MC's On To A Single Drop Target
Hi All

I am struggling with a drag and drop excercise.

I have 15 movie clips that need to be dragged over a single drop target in a specific order. i.e 1,2,3,4, when the correct movie clip is dragged to the drop target a movie within the drop target needs to advance a single frame to display the result of the correct movie clip being dragged over the drop target.

Would I be correct in thinking I need to use some kind of array to compare the clip that is being dragged to the frame position of the drop target?

I have the bones of this working and need advice / help on getting the clips to work in the specific order required. I can post my code if needed.

Thanks in advance.

btw - am using Flash MX 2004 Professional

---

[fmx] Drag And Drop With Multiple Drop Locations
Hi

I am trying to make a draggable object have two drop locations, but it will still only drop to one. Please if anyone can help me or notice my mistake it would be really appreciated.


on (release) {
if (_root.DragMotor._droptarget == "/Socket2") {
_root.DragMotor._x = _root.Socket1._x;
_root.DragMotor._y = _root.Socket1._y;
_root.CheckMotorDrop();
} else {
_root.MotorDropped = 0;
}
if (_root.DragMotor._droptarget == "/Socket1") {
_root.DragMotor._x = _root.Socket2._x;
_root.DragMotor._y = _root.Socket2._y;
_root.CheckMotorDrop();
} else {
_root.MotorDropped = 0;
}

function CheckMotorDrop () {
//set the speech bubble to give information
_root.txtSpeech = "You have added a motor to the circuit.";
setProperty(_root.DragMotor, _width, 55);
setProperty(_root.DragMotor, _height, 55);
_root.MotorPowered = 1;
_root.DragMotor.play();
_root.MotorDropped = 1;
}


Thanks for your time, Matt.

---

Drag And Drop With Additional Drop Area
Hi there i have a little project on at the moment, an educational game for children, where items need to be dragged from one position to another, but with the possibility of being dragged to a seperate holding area first, before being dragged to their final resting area.

i have this code which deals with a straight 'a to b' drag and drop function:


Code:
setProperty(_root.boing,_visible,false);
function dragSetup(clip, targ) {
clip.onPress = function() {
startDrag(this);
this.beingDragged=true;
};
clip.onRelease = clip.onReleaseOutside=function () {
stopDrag();
this.beingDragged=false;
if (eval(this._droptarget) == targ) {
this.onTarget = true;
_root.targ.gotoAndStop(2);
} else {
this.onTarget = false;
_root.targ.gotoAndStop(1);
}
};
//the variables below will store the clips starting position
clip.myHomeX = clip._x;
clip.myHomeY = clip._y;
//the variables below will store the clips end position
clip.myFinalX = targ._x;
clip.myFinalY = targ._y;
clip.onEnterFrame = function() {
//all these actions basically just say "if the mouse is up (in other words - the clip is not being dragged)
// then move the MC back to its original starting point (with a smooth motion)"
if (!this.beingDragged && !this.onTarget) {
this._x -= (this._x-this.myHomeX)/5;
this._y -= (this._y-this.myHomeY)/5;
//if the circle is dropped on any part of the target it slides to the center of the target
} else if (!this.beingDragged && this.onTarget) {
this._x -= (this._x-this.myFinalX)/5;
this._y -= (this._y-this.myFinalY)/5;
setProperty(_root.boing,_visible,true);
}
};
}

dragSetup(circle_mc,targetCircle);
dragSetup(circle2_mc,targetCircle2);
dragSetup(circle3_mc,targetCircle3);


which i have then tried to adapt to 'a to b possibly via c':


Code:
function dragSetup(clip, targ, drop) {
clip.onPress = function() {
startDrag(this);
this.beingDragged = true;
};
clip.onRelease = clip.onReleaseOutside=function () {
stopDrag();
this.beingDragged = false;
if (eval(this._droptarget) == targ) {
this.onTarget = true;
this.onDrop = false;
_root.targ.gotoAndStop(2);
} else if (eval(this._droptarget) == drop) {
this.onDrop = true;
this.onTarget = false;
_root.targ.gotoAndStop(1);
} else {
this.onTarget = false;
this.onDrop = false;
_root.targ.gotoAndStop(1);
}
};
//the variables below will store the clips starting position
clip.myHomeX = clip._x;
clip.myHomeY = clip._y;
//the variables below will store the clips end position
clip.myFinalX = targ._x;
clip.myFinalY = targ._y;
//the variables below will store the clips end position
clip.myDropX = drop._x;
clip.myDropY = drop._y;
clip.onEnterFrame = function() {
//all these actions basically just say "if the mouse is up (in other words - the clip is not being dragged)
// then move the MC back to its original starting point (with a smooth motion)"
if (!this.beingDragged && !this.onTarget && !this.onTarget) {
this._x -= (this._x-this.myHomeX)/5;
this._y -= (this._y-this.myHomeY)/5;
trace("didn't drag anywhere");
//if the circle is dropped on any part of the target it slides to the center of the target
} else if (!this.beingDragged && !this.onDrop && this.onTarget) {
this._x -= (this._x-this.myFinalX)/5;
this._y -= (this._y-this.myFinalY)/5;
trace("correct!");
} else if (!this.beingDragged && !this.onTarget && this.onDrop) {
this._x -= (this._x-this.myDropX)/5;
this._y -= (this._y-this.myDropY)/5;
trace("teacher drop area");
}
};
}
dragSetup(circle_mc, targetCircle, dropPlace);
dragSetup(circle2_mc, targetCircle2, dropPlace);
dragSetup(circle3_mc, targetCircle3, dropPlace);


any ideas where i'm going wrong? it looks right to me but only ever seems to work when you drag 'a to b'

thanks,
dave.

---

Drag And Drop - When Drop Targets Overlap
Hi,

Please see
http://www.paraminionstudios.com/dump/PleaseHelp.zip for the files I'm requestiong help on (upload tool is not working).

Drag and drop the power generator "icons" on the left of the screen into the designated areas in the 3d scene to "install" power generators along the side of the building.

I have 4 designated regions in a 3d rendered scene. there are 4 dragable power generator "icons" on the far left of the screen. When the generator icons are dragged and dropped upon one of the 4 targets, the target mc advances to frame 2 of the target mc, and the generator icon disappears (actually the generator icon mcs simply advance to frame 2 of the mc.. a blank kframe). Frame 2 of each of the targets contains a small graphic of a generator that fits the perspective of the 3d scene.

my problem here is that my target MCs overlap slightly. This is causing some issues. if you have already "installed" generator 1, and you then go to drag another icon just below target1, flash is getting confused because of the overlapping. Is it possible to change the instance name of the target after dropping a generator icon on the target so that the script doesn't get confused? the layer order doesn't seem to have any bearing on anything here as I had hoped.

The file is located (upload tool isn't working) at:
http://www.paraminionstudios.com/dump/PleaseHelp.zip

On "vacation", working for a client. never fun.

---

Drag And Drop
Ok folks I have a cd player on the main timeline its turned into a MC instance name player then inside player is a cd that is a button and a MC so
it can be dragged. Also inside player is a box instance name box . Also inside player is MC text instance name txt . What I want to happen is when
you drag the cd over the box it tells the text to play . I have tried to do this with great stress here is the code i have on the cd mc. I can make the cd
drag but I cant get the txt to play when it the cd is drooped into the box.can someone please help

on (press) {
startDrag ("../cd", true);
}
on (release) {
stopDrag ();
if (getProperty("../cd", _droptarget) eq "../box") {
tellTarget ("../txt") {
gotoAndStop (2);
}
}
}

---

Drag -n- Drop
hi all. i´m kinda new to actionscript. i want to make a floating interface that is draggable. It works so far. check it out: http://www.probus.f2s.com/interface.swf

but now i want an image under the interface that isn´t draggable(it will be visible throught the lens and it will probably contain a magnify-effect)
Is it possible to apply a drag-action to more than one movieclip, or could i apply the drag-action to the whole file by leaving the target-option empty, and simply exclude the image behind the lens?
I hope someone can help me with this.

---

Drag And Drop
Hello

My dilenma is this?
Im trying to have a drag and drop object lets say a
BOX = a

I wanna drag it to a circle = b

Which in turn will initiate a response = c

How do i do this in actionscript??


Thanks

---

Drag And Drop
How do you create some dynamic actionscripting in a game for eg.
You have a few ball symbols on the stage and a symbol of a bag. You can only put 5 balls into the bag before you get a meassage that the bag is full. You move the balls into the bag using the startdrag and droptarget actions, the balls can also be removed by dragging them out of the bag again.

I know how to write this code its simple.
But how do you tell flash when the bag is full? What will the code look like?????

Please advise

---

Drag & Drop...
a common effect im trying 2 achieve here is the DRAG & DROP effect, whereby i'll be using it to navigate through my site. Anyone can help on how it can be done? Thanx

---

DRAG AND DROP, HELP
Hi there,

I got 7 icons and 7 blank boxes in the movie. All the 7 icons got to be dropped to the right box and if the icon is dropped to the right box then a message "you are right" will appear and the particular box will be high-lighted (its like a signal to tell you that you have dropped the icon to the right box) but if you drop the icon in the wrong box then the icon will go back to the original spot (where the icon was) and a message "please try again" will appear (the box will not be high-lighted because its not the right answer).

I've managed to use the "hit test" action to do it but the message will appear indefinitely.

I will really appreciate it if anybody out there can help me on this.

Please help! Thanks in advance.

---

Drag And Drop
I try to make a drag and drop button but...

I make one and it works well.
My problem is with 2 buttons.
I drag button1 and all the buttons drag(move)...
I only want drag(move) button1 not all.
I want to drag the 2 buttons but not at the same time.
I want something like that, 8 folders that i can move one then the other and so on...

Best Regards

---

Drag And Drop Help
I have 3 buttons. I want to drag and drop only one in random order.
My problem is that when i try drag one all the other buttons drag to.
All buttons are in seperate layer(3 layers).

I think i have to put something in target(????).
I try the name i gave to the button but didnt work.
All buttons still drag and drop in the same time.
I only want one in each time.

(supose i learn with 3 then i can use in 12 )

Best Regards

Rui

---

Drag And Drop
I have 3 buttons. I want to drag and drop only one in random order.
My problem is that when i try drag one all the other buttons drag to.
All buttons are in seperate layer(3 layers).

I think i have to put something in target(????).
I try the name i gave to the button but didnt work.
All buttons still drag and drop in the same time.
I only want one in each time.

The cose i use is:
on (press) {
startDrag ("");
}
on (release) {
stopDrag ();
}

What do i put on the "" ?
I try the name of the button but didnt work.
I dont know how to name a instance on a button, because there is no option available.
Movie Clip - Behavior and "Name"(here i can name a instance)
Button - Behavior and "Option"(here i cant)

I try evan with a Movie clip but that way i have more problems, i only can drag the last layer and when i clik on any part of the scene he drags to.
Because the option Mouse Down and Mouse UP is for the entire scene.
With movie clip i can name a instance but didnt work to.

Hel me please, i'm complited LOST...

Best Regards

Rui

Ps: Sorry to put so many posts but i realy need this fix

---

Drag And Drop
Does anyone know if it's possible to drag and drop something from one mc to the next, put have it dropped within the mc in a specific frame. Or does it always just appear on top of that mc?

EG:
Drag a circle from MC1 to MC2 to a drop target called square1. MC2 consists of many frames, and the square1 is in frame 20. You drag the circle and it is dropped on the square1. When you move through MC2 the circle should disapper because it was dropped a few frames earlier and now you are in frame 40. Is this possible, or will the circle appear in every frame of that MC it were dropped into?

Let me know if this is unclear.....
L

---

Drag And Drop Help Please
I am having the worst time trying to make an object dragable in flash5. I have checked the tutes and all of them appear to be for flash4, or I am just really dumb and cant understand. So far the only thing I can figure out is this:

1. convert said object to symbol (button)

2. assign the action on mouse event (press)

3. assign action start drag

I know that those steps are only part of the process, but can someone please help me figure this out? I'm going bald from all the hair I've pulled out. Thanks.

---

Drag -n- Drop Help...
I have been trying to do the drag-n-drop tut..but for some reason..I can the ball (draggable object) to be shown. It is invisible. Cant see it anywhere. Here it my code:

1. New project. Made new MC>>>> Made ball (button) inside of this MC.

MC name: ballbutton
Instance name: ball

2.Gave button inside MC the actions of:
on (press) {
startDrag ("/ball", true);
}
on (release) {
stopDrag ();
}

3.Dragged movie to the stage.....all worked fine 'till here!

4.Made new MC "hole"...and made graphicimage of a "hole" inside of MC. Dragged that MC to the stage/

5.Went to "ballbutton" MC and added this code to the instance/button inside the MC:

on (release) {
if (GetProperty ("/Ball", _droptarget) eq "/Hole") {
setProperty ("/ball", _visible, "0");
}
}

6.Added a new layer (just for actions)

Frame 1: if (getProperty ("/ball", _visible )=0) {
nextScene ();
}

Frame 2: gotoAndPlay (1);
Can somebody tell me what I am missing...or where a good "EASY" tut on this would be? Thanbks -whispers-

---

Why Can't I Drag And Drop?
Isn't the way to get a button to a frame in a movie simply to drag it there from the library? well I can't do this. I can select it but it hops back to the library when I release the mouse. what gives?

---

Drag And Drop
I am work on the "Laser Effect" Tutorial and I can't pass the :
Drag a copy of the "line" symbol into the first frame of the TEMP layer and center it
Drag a copy of the "ball" symbol into the first frame of the LASER CONTACT layer

How do I drag a object into a frame.

---

DRAG AND DROP
hey, i really need to know how to drag and drop something in a movie, without dragging the ENTIRE SCREEN! if you know how to do it, please help me, its not that hard, im probably just being a dumbass! this is my code right now :

on (press) {
startDrag ("");
}
on (release) {
stopDrag ();
}

PLEASE HELP!

(ps. this is totoally irrelevant but do you know how to actionscript keyboard into your game or interactive movie?)

---

DRAG A & DROP
NEED HELP!!

What is a simple way to Drag & Drop buttons from one
stupid thing to the next stupid thing??

---

Drag And Drop
If you have made a movie clip and are able to drag it, how do you make it go to a specific place when you release it? And how do you make it go back to the starting position if the place where you released it is the wrong one?

---

Drag And Drop
I would like to know how you specify an area where you can drop a movie clip and how you make it go back to the original position if it's dropped outside that area. (I have Flash 4).

---

Drag & Drop
I am trying to make a project in which users drag shapes back to their original spots (after they have been rearanged in an animation.) I am using Flash 5 and would appreciate any help with getting the objects to drag and drop correctly. If someone could maybe show me and example of something similar it would be a great help. Thanks.

- Gogeta

---

Thanks On The Drag Drop
Thanks to everyone who gave me hand and pointers in the right direction the ( its a drag and drop with return to orginal postion if note a certain area and reaets another clip to orginal x and y)

on (press) {
_root.movieclip02._x = 670;
_root.movieclip02._y = 284;

startDrag (_root.movieclip01);
}
on (release) {
stopDrag ();
if (this.movieclip01== (parent.drop_areaMC)) {
_root.movieclip01._x = 670;
_root.movieclip01._y = 359;
tellTarget ("_root.anim_clip") {
gotoAndPlay (2);
}
} else {
setProperty ("", _y, OrgY);
setProperty ("", _x, OrgX);
}
}

---

Thanks On The Drag And Drop
Thanks to everyone who gave me hand and pointers in the right direction the ( its a drag and drop with return to orginal postion if note a certain area and reaets another clip to orginal x and y)

on (press) {
_root.movieclip02._x = 670;
_root.movieclip02._y = 284;

startDrag (_root.movieclip01);
}
on (release) {
stopDrag ();
if (this.movieclip01== (parent.drop_areaMC)) {
_root.movieclip01._x = 670;
_root.movieclip01._y = 359;
tellTarget ("_root.anim_clip") {
gotoAndPlay (2);
}
} else {
setProperty ("", _y, OrgY);
setProperty ("", _x, OrgX);
}
}

---

DRAG En DROP
ok guys
i have one square and five circles

you can drag the circles

now what i want to do is;
when you drag circle 1 to the squar and drops it in the square, movie 1 starts playing
when you drag circle 2 right in the square movie2 starts playing
.............
how should i make this?
how can i make the box sensitive for the circles? and
how does it knows wich circle is dropped?


thx guys

---

Drag And Drop O Fun...
So i made a little drag and drop interactive thingy, you drag parts of a face onto the face, you know what im talking about. But the problem is, there were a lot of clips, so i put it in a clip, that when an arrow is clicked back or forth a couple more face pieces are displayed. But now the draging or dropping wont work, but it works fine when not put into a clip!

help!

---

Drag And Drop
Hey, if I have a bunch of draggable movie clips, how do I bring the clip I'm dragging to the top? (Rather, on top of the other MCs.)

---

Drag And Drop
what does the .pop() do ?
if (_droptarget.split("_", 2).pop() eq "1")

p.s.
I am looking for a good example of a drag and drop interaction I can use. If you know of any I would appreciate it.

---

Drag & Drop
Dear Flahers,
Im in trouble, I have 3 objects, that i want the user to be able drag then drop them in their right places.
i did the following
lets say the movie clip called A, and to be dropped on movie clip B.

in MC A, i put a button, that has this action :
on (press) {
_root.A.startDrag ();
}

and in the action of MC itself i put
onClipEvent (enterFrame) {
if (this._dropTarget eq "/b") {
this.stopDrag}

and i do the same for the rest of the movie clips that i need them to be dragged to other places.

when i run it, the first object i drag and drop works perfectly, and then i go to drag the second one, but it doesnt move, sometimes it moves very very slowly.

any object that i drag first works perfect, and the rest dont.
Any Idea??????????
Thank you All

---

Drag And Drop
I have a drap and drop with a hit test.

Here is my current code which just plays a movie clip on the stage if the hit test is true.

What I want to happen is if the hit test is true I want to advance to a frame label. I tried putting a goto and play action (for a frame label in scene 1 but it didn't work. I have also tried putting a gotoAndPlay at the end of the "correct1" movie clip but that doesn't work either.

Any ideas???? I am trying to finish this up tonight if at all possible. THANKS



on (press) {
startDrag (_root.selection3);
}
on (release) {
stopDrag ();
if (this.hitTest(_root.box1)) {
with (_root.correct1) {
gotoAndPlay ("Scene 1", 2);
setProperty (_root.selection3, _x, 306.7);
setProperty (_root.selection3, _y, 228.1);
}
} else {
setProperty (_root.selection3, _x, 421.7);
setProperty (_root.selection3, _y, 291.8);
}
}

---

Drag And Drop ?
What is the code to get a an object to be selected when clicked on, then drop and deselected by clicking again
(ex. Like wanting to move a chess piece from 1 square to another)???????

---

Drag N' Drop
How do I make objects drag n' drop into targets? I don't know the code. =(.

Please help!!!

---

Drag And Drop
i am trying to make my flash animation go to the next scene when the user places all five MC objects into the correct targets.

i don't know where to place that code and how.

---

Drag N Drop
Hey Everyone,

How can i do drag and drop objects in flash using actionsript? For example have 3 objects which u can move around the screen. Can anyone tell me how or give me any links to tutorials on this? Cheers

Blue Dragon

---

Drop And Drag
I have an idea to allow users too fill in a form and then either browse to a file or simply drag and drop it from there computer to my site.
Somehow this should be able to upload to my site.
Has anyone any ideas on how i could do this or even if it can be done?
Thanks in advance!!

---