Help In Creating This Effect.
I want to use similar effect located here (http://glaceau.com/). You actually have to click Flavors under the Vitamin Water link at the top then let the animation run its course.
The effect I want to figure out is how to make the "Try it" animated movie clip follow the mouse when the mouse is over the bottle. I understand the logic behind this....the bottle is a MC, the Try It is a MC with an on and off animation where it simply follows the mouse when the mouse is over the bottle MC....im just having trouble figuring out how to code it.
Any tips would be much appreciated!
FlashKit > Flash Help > Flash ActionScript
Posted on: 07-19-2007, 04:53 PM
View Complete Forum Thread with Replies
Sponsored Links:
Creating A Tunnel Effect/ Creating Snow On Tv
I'm trying to create two effects and I'm new to using swish. Anyone have some hints on how to make a 3D tunnel effect- as if the person viewing is entering a winding hole going down.
I'm also trying to make an effect of snow on television (the static you get when you don't have any reception). Any hints?
Thanks
View Replies !
View Related
Creating This Effect.......
I came across this site and was just curious if anyone out there could tell me how this effect of turning the pages could be created. It would make a great tutorial if anyone has sometime!
http://welcome.hp.com/country/us/en/...reamworks.html
View Replies !
View Related
Creating Another Effect :)
Ok, this time, it's an effect i've seen done before, so I know it will work
I want to create an effect where the object fades in, but like it moves and it fades in at the same time.
I'm trying to create the effect, but I'm stuck at this point. It's coming in, but half of it needs to have the alpha of maybe 60%, and the rest of 12% or something. How would I do this (without actually splitting the object) ?
thanx in advance...
View Replies !
View Related
Creating An EQ Effect
does anyone know of a good place to look to learn how to create an equalizer effect that will move appropriatly with music?
maybe not even go exactly with the audio the way a real EQ would(lows/mids/highs), but rather just dancing to the beat kinda thing. although, a real EQ simulation would be best.
thx
View Replies !
View Related
Creating An Effect..
OK,
I want to create a basic effect. It's like this: imagine a bunch of squares. Now imagine a mask with a type of gradient fill, that will mask these squares so that it kind of fades in, but is kind of like a train; only the first part of it will have an alpha percentage of 0, the second part of 1, the third part 2, etc. Each part is only a pixel wide, so it kind of like fades in as it gets wider. Then, I want to animate this mask so it moves across the squares, and kind of fades them in. You know what I'm saying?
It's kind of hard to explain . Basically, I want to create a mask that will kind of let things fade in .
thanx in advance...
View Replies !
View Related
Re Creating This Effect...
http://www.audi-me.com/audi/me/en2/neuwagen/a8.html
does any one know how to re create the zoom transition in about 6 seconds. the actual change from the car far away to the close car?
thanks for your help in advance...
View Replies !
View Related
Creating A Carbonation Effect
hello again
I am attempting to create a site that looks like carbonating soda. I created 5 unique carbonation bubbles and would like them to randomly appear on screen. Here is what i have figured out...
-random location
-random transparency
-creating unique movie clips by adding a variable that counts up
of courese the easy stuff right? : P
The route I took was duplicating a movie clip so that was loaded off screen. But it would Is there a more effective way to achieve this effect? Maybe loading external swf files?
I appreciate it y'all
bill
View Replies !
View Related
Creating Scrolling Effect
Ok...I know exactly how to create a scrolling box (like a ticker) but how do i get text to scroll..with a scroll bar...I can create each object and know what it looks like...but don't know how to get the effect...Thanks
Abel
View Replies !
View Related
Creating A Writing Effect?
I am trying to create a writing effect for title 'welcome to angelle's world' on the homepage of a horrible girly site I am working on.
I want a transparent background for the flash movie (as the background is quite complicated) and I don't know how to create a mask to reveal the letters/words gradually....I'm going to use a star shape as the pen!
Can anyone help me please!? Cheerz ...
View Replies !
View Related
Help Creating Button Effect
I have a button that says menu. When you rollover it, a menu banner slides from above (off screen) and the navigation appears. When I roll out, the banner just dissapears.
How can I rig it so that when I roll out, the nav banner either slides off again, or fades away.
Thanks.
View Replies !
View Related
Creating A Lightning Effect
Hey everyone, new to flash here.. obviously. Anyways, I was creating a movie and I really wanted some great lightning to flash while my image was coming into view. I tried drawing with the paint brush and with the pencil tool but both have turned out cheesey.. it looks like I drew it in and I was hoping for more of a shiny "lightning look" instead of some sharp lines. Does anyone know of a good way to create a nice lightning in Flash or if not there in Adobe Photoshop? Thanks for any help!
View Replies !
View Related
Creating The Effect Of Drawing
I have a student who is trying to create the effect were a point is drawn out so as to become an oval shape, the circle has to follow the path of the oval, so she cannot simply use a shape tween!however i cannot find a simple solution. If it was a line, I could use a mask and hide the line behind it, revealing it to simulate the effect of the line being drawn, however since this is an oval shape, i am lost.
Is there a way of attaching a guide path to hints?
Im lost
View Replies !
View Related
Creating A Odd Effect.- Mac Dock In OS X
I would like to try to create the Dock effect, when you move your mouse runs over the icon, it enlarges and shrinks back down once the mouse has left it. Hopefuly there are a few people out there who use Macs that know what I am talking about!!
If some one could help me in the direction it needs to take, I would be grateful. Thanks for your time.
Paul
View Replies !
View Related
Creating A Grid Effect
Hi there, I was just wondering how to create a grid effect as shown on this interface.. http://www.flashkit.com/gallery/Inte...3350/index.php I know i cud just draw all the lines myself, but there must b a quicker and more efficient way than this!! plzzzz some1 help
Thanks Lopster
View Replies !
View Related
Creating A Typewriter Effect: How Do I Do It?
I'm doing a website for a non-profit TV production house. They have an existing website using some flash at www.gntvmin.org. I'm in the process of redesigning the website. The manager came to me and said that he wanted the .swf animation from the top of the page to stay, but with some changes. The previous webmaster can no longer be contacted, and the original .fla file is not on any of the backup disks I have. I'm new to Flash, and I would like to know how the typing text effect was created. Most of the other effects in the original animation I can do since it all appears to be tweening between frames.
View Replies !
View Related
Creating This Effect, With Text?
Kind of like a mini sonic boom, I'd like to learn how to do this with just standard text, and maybe a smaller radius. Just the effect the little ball has when rolled over.
An example- http://www.flashbuttons.com/basicFor...ame=GiveBlood2
How would i go about this?
View Replies !
View Related
Help Creating A Flash Effect
I am wanting to create a flash movie that has a strip of thumbnails that scroll the opposite way that the mouse is moving. Then the user can click on the thumbnail and it enlarges the image.
Here is an example of the functionality that I want to create.
http://www.stjames.edu/index_flash.asp
any helpful information will be greatly appreciated.
thanks
View Replies !
View Related
Creating A 'highlighter Pen' Effect
Hi guys
I need to develop functionality for a text area that allows the user to drag over text to highlight it as if a highlight pen has been used - like the effect that is gained with 'getTextSnapshot()'. If possible it would be great if this could be removed by dragging too.
Any ideas?
Thanks
Ol
View Replies !
View Related
Creating Button Effect
I am, admittedly, a novice user, but do have some experience with Flash. I want to create a button effect that, when you take the mouse away from the button, the image or effect reverses what happened when you placed the cursor over the button.
The butttons I have created on this site are a good example:
www.daughtersofheaven.org/html/home.html
The five buttons at the top, that start with ABOUT. I have made them so they transition and fade into another color and alternate text when you mouse over them, but when you take the cursor away, they 'snap' back to the original image. I want them to 'fade', or 'transition' back as they did when you when mouse over them.
I can't figure this out. Can anyone give me some clues?
Thanks,
David
View Replies !
View Related
Some Advice On Creating This Effect....
hi guys -
here are a couple of really sweet sites, and I'm hoping someone can set me off in the right direction to make a site similar. What I mean is to have an extra large canvas and when a button is clicked you move to a different spot on the canvas. sort of like this:
http://www.leoburnett.ca/
and I like the movement on this one
www.stardust.tv
I realise these are very complex sites, but maybe someone could point me in the right direction, or towards some relevant tutorials...
thanks
View Replies !
View Related
Creating A Vignetting Effect?
Hi all,
I have a question: I want to create a vignetting effect to my project (like when the corners are burnt a little like when watching an old projector for instance) and can't figure out a nice way to do this.
My current direction involved using a radial gradient that faded from the middle to black (or brown or or etc) at the outside and then fiddling with the alpha over time, but its just ends up looking blurry and muddy and makes all the graphics below it looks gross.
Has anyone any suggestions or help that can help me in this hour of need?
By the way I'm on Flash MX 2004 so I can't use transfer modes (theres a reason for this so no, upgrading won't be a useful answer).
Thanks in advance!
Seth
View Replies !
View Related
Creating A Drunk Effect?
Hi im new to this and am not sure how to create it ....
what i want to do is create a mc that acts as the mouse but moves randomly along the _x axis creating a swaying effect
i would like the sway to be small at first and then grow bigger as the person gets drunker and obviously harder to control
i know what i have to do is randomly increment the _x position depending on which way the person is swaying but i dont have a clue how to code it any help would be greatly appericated
View Replies !
View Related
Creating A Wormhole Effect?
Fellow Forum Members,
I'm trying to create a wormhole effect using stars, masking and some basic tweening. Anyways, attached is a FLA file showing what I have so far been able to accomplish on my own and I'm by no means happy with it. I would really appreciate it if some talented flash guru can give me some advise on how to create a wormhole effect that has stars swirling around in a clockwise direction (the swirling in itself creating a black hole in the center) and continuously scaling from large to small stars to give the illusion you are traveling through the wormhole. Can this effect be accomplished utilizing masking and basic tweening.
Cheers,
Binar
View Replies !
View Related
Creating A Text Effect
Hello there,
Can anyone help me in making a text effect the same as the one located at the top right-hand corner of the following site: http://www.heartinternet.co.uk/.
I would be very greatful if anybody could help.
Regards,
Coxdabd.
View Replies !
View Related
Creating A Text Effect
Hello there,
Could anybody help me to create a text effect like the one by visiting the following site: http://www.heartinternet.co.uk. It's a piece of text which rolls in from the left to the right with a cursor looking as though it’s bringing the text in. I've attempted to make this several times but as yet have failed.
I would be very grateful if anyone could help.
Regards,
Coxdabd.
View Replies !
View Related
Creating This Effect In An Image Map
I wan't to know how create a filter that looks just as if it is becomes thicker as you RollOver the country just like this interactive map:
http://www.3.dk/International/Templates/Default.aspx?id=24814
By the way, I was wondering how you only show certain areas (Graphics of areas and such) on your map as you click on a certion region and everything else disappears. Is it possible to "link" to another layer which contains the things that should be the only visible graphics as you click on the defined region?
Edited: 08/03/2008 at 03:35:40 PM by Al1990
View Replies !
View Related
Creating A Water Effect Using AS3
Hi There
I have created a water effect in Adobe Flash using AS2, however I now wish to create a flash application with the same effect but using AS3.
Please see the attached code I have used to create the water effect using AS2.
I am looking for somebody to help me change this to work in Action Script 3. Any help would be greatly appreciated.
Thanks
Tremayne
Attach Code
// -----------------------------------------------
// Water Reflection Effect
// -----------------------------------------------
import flash.display.*;
import flash.geom.*;
import flash.filters.*;
myBitmap = new BitmapData(1090,770,false,0);
pt = new Point(0,0);
mpoint = new Point(0,0);
myDispl = new DisplacementMapFilter(myBitmap, mpoint,1,2,10,50);
water_mc.myList = new Array();
water_mc.myList.push(myDispl);
water_mc.filters = water_mc.myList;
i = 1;
this.onEnterFrame = function()
{
filterList = water_mc.filters;
offset = new Array();
offset[1] = new Object();
offset[1].x = i;
offset[1].y = i/8;
myBitmap.perlinNoise(45,5,3,50,true,false, 7,true,offset);
filterList.mapBitmap = myBitmap;
water_mc.filters = filterList;
i++;
}[h]Text[/h]
View Replies !
View Related
Creating An Ice Effect In Flash MX
I'm trying to create the effect of ice to make a button.
I've made Ice effects in Photoshop, but cannot import the file into Flash MX with out it looking crap.
Is there a way I can creating authentic looking Ice in the program itself.
Cheers
View Replies !
View Related
Creating The Shine Effect
http://www.kirupa.com/developer/mx2004/shine.htm
when i do this in flash MX, not flash MX2004, on step VI, it indicates that it is a motion tween not a shape tween.
however, in flash mx, it will only allow me to perform a shape tween, will this affect my work?
View Replies !
View Related
Creating The Shine Effect Help
Hi,
I was going through the "Creating the Shine Effect" tutorial written by Sharif, and couldn't get my version to work. If the original file (the Afri bottle) or a better file is available I would definitely like to take a look.
Also, I'm looking for a sizzling/static look - like a Matrix effect (not the text Matrix effect). If anyone can point me in the right direction, a link, an fla, anything would be helpful.
Thanks
View Replies !
View Related
Help With Creating A Fade-in Effect
I would like to create a slide-show that automatically starts playing when my website loads. After looking through several libraries of online Flash tutorials, I haven't found one that tells me how to do the exact thing I'm looking to learn. There are probably many ways to create slide-shows, but I want mine to use simple fades from image to image. Here are the specifics of what I want the end result to be:
The slide-show will start playing automatically when my webpage loads.
The first image in the sequence will fade-in from solid white. After displaying for say 3 seconds, this first image will fade-out to solid white.
Every successive image will fade-in and fade-out in the same manner.
I may decide that I would rather "cross-fade" the images instead of fading them all in and out to white, but that will come later.
Any help or suggestions would be greatly appreciated. I am not an experienced Flash user yet, so hopefully I can understand the terminology and instructions as they come at me
View Replies !
View Related
Creating An Ice Effect In Flash MX
I'm trying to create the effect of ice to make a button.
I've made Ice effects in Photoshop, but cannot import the file into Flash MX with out it looking crap.
Is there a way I can creating authentic looking Ice in the program itself.
Cheers
View Replies !
View Related
Creating A Vignetting Effect?
Hi all,
I have a question: I want to create a vignetting effect to my project (like when the corners are burnt a little like when watching an old projector for instance) and can't figure out a nice way to do this.
My current direction involved using a radial gradient that faded from the middle to black (or brown or or etc) at the outside and then fiddling with the alpha over time, but its just ends up looking blurry and muddy and makes all the graphics below it looks gross.
Has anyone any suggestions or help that can help me in this hour of need?
By the way I'm on Flash MX 2004 so I can't use transfer modes (theres a reason for this so no, upgrading won't be a useful answer).
Thanks in advance!
Seth
View Replies !
View Related
Creating A Typing Effect
After months of cruising through all of the great sites, links, and forum posts US has to offer, I'm making my first post! yay me!
anywho...
was wondering if anyone has an easy way to create a typing effect in flash? i'd love to be able to load an external .txt. file and have it "type" onto the screen character by character.
to date, all i've been able to come up with is the brute force method of creating individual frames and typing each letter as i go. i've also tried dragging a mask over a text box, but it's not as clean as i'd like.
thanks for any help/ideas!
View Replies !
View Related
Creating A Denting Effect
I was wondering if anyone knew how to create a "dent" effect. By this, I mean I would like to have a large square graphic, then as the movie progresses, the center of the square dents in, in the middle. To where it looks like the top and bottom of the square is higher than the middle.
Any ideas?
View Replies !
View Related
Creating A Smooth Snowfall Effect
Hi there,
Im fresh on the scene and have practivcally no experience. I am trying to make a flash decor for my website and am having problems. I need (for one of many things) to create a smooth looking snow effect. except it isnt snow it is Jems. Now the prolem im having is that the jems come down in clusters. Yes I have moved the keyframes closer to the 1 frame in the motion tween (thats what all the tutorials i read gave me). It still looks like crap and is very buggy. Now how can i fix that?
thanks to whoever will help me. Please know I will be asking alot of questions (im a perfectionsist of sorts)and help from experst sounds great at a point like now, since I am about to open an art commision site. But if you look at my website please note that I am alot more experienced than i was at that point in time. thanks
~joe (Hoomin)
View Replies !
View Related
Re-creating This Cool Effect Desperate
Hi there,
I'm trying to re-create this effect for a project, and I just need some help as my flash is a little rusty.
I'm using MX, and need to set-up this effect where the images are laid out along each other, and depending on the button, the images scroll past each other to bring the selected image to view.
The effect is on this site:
http://www.fosterandpartners.com/internetsite/
To get to the effect im talking about - Click on the bottom right button on the grid of 9 images - the link to the RIBA Awards page.
Then you will see the effect with thumbnails and scrolling main view.
If anyone can help I'd be more than immensely thankful, I've been searching the tutorials for days with no luck.
View Replies !
View Related
|
TRACKER
