Flash :: MC Loader As Ques.

Flash Ques
please can you explane me how can I make this file like on this site:
http://www.t-s-k-b.com .You go on this site and press SAKUBA WORKS and then button Painting/Drawing

I would like to make a picture gallery like in Painting/Drawing: So how I can make when the mause on the button to show small image of the picture and when I press the image to open the picture how is on the site(not in a new window)?
Please tell give me advice how could I make it!
thank you

Another Loading Ques
Is it possible to make the movie load let's say... only the 1st 2 frames of movie that has 8?

Button Ques
Ok real dumb ques..I have this animation..u can dl it from here: www.zeroxposur.com/test/nav.fla
So what I want to do is have 5 buttons fade in ..onto the bar as it finishes its animation..but I dont know how to do it.. Can anyone point me in the right direction. Thanks

Easy AS Ques.
ok so I have a flash doc..theres a an MC called target on mainstage that has the entite site in it (doing a fullscreen centered website)..now I have MC nav buttons on the stage (inside target). Inside one of the nav buttons I have a line of AS that says

ActionScript Code:
this.onRelease = function(){
_root.target.loadMovie("bioresume.swf", "loader");
}

Now im not sure If im doing that right..but what i want to happen is; after u release the button, load the ext swf into the empty MC called "loader". But what seems to be happening is it loads the ext swf but everything else on the site disappears. See I originally had this as my AS cause i thought this made sense but it ends up not doing anything:

ActionScript Code:
this.onRelease = function(){
loadMovie("bioresume.swf", "loader");
}

So if anyone knows what I did wrong, much appreciation. Heres the site link if u want a visual:

www.josephsernio.com/test

Easy As Ques.
Ok for some reason the end of this code doesnt work.. on release, i want it to take me to frame 2..and it wont...btw this a movie clip that has button properties through AS:

stop();

this.onEnterFrame = function(){

if(rewind == true){

prevFrame();

}

}

this.onRollOver = function(){

rewind = false;
play();

}

this.onRollOut = function(){

rewind = true;

}

this.onRelease = function(){
gotoAndStop(2);

}

Fscommand Ques
Hi all, I was working with fscommand, when it struck me what FSCOMMAND stands for.

"Future Splash Command"

Can anybody confirm this, or am I mad, lol

Later

ORANGE900

LoadVariables Button Ques
Hello all. I have this code attached to a button calling up a different text file to a dynamic text field and it works fine, except I'm having to hit the button "twice" for it to work. Can't figure out why. Can someone enlighten me please?

code:

on (release) {
scrolltext = scrolltext1;
loadVariables ("scrolltext1.txt", scrolltext1);
}

Thanks in advance

Easy - Pong AI Ques.
Ok just to see if I could do it(never really got into game programming) I tried to make a pong game everything works so far but I have a problem with this:
Flash code:

PHP Code:

onClipEvent(enterFrame) {
if(_global.cspeed == 0) {
}else{
    if (this._y != _root.ball._y){
        if(_root.ball._y < this._y){
                this._y -= _global.cspeed;
        }else if(_root.ball._y > this._y){
                this._y += _global.cspeed;
        }else{
                this._y = this._y;
        }
    }
}
}

The problem is that instead of moving smoothly up the screen it looks like it s shaking up and down really quickly, but I would like it to be smooth.
Please help.

Movie Clip Ques
Hey i just started doing flash yesterday and i am doing a text fade

I made the motion tween and and everything and when i go to control and play everything is smooth but when i go to test movie nothing it just stays the same and doesnt fade :> plz help me

Quick Mask Ques
Im sure this is an easy one.. on the foofighters website http://www.foofighters.com When U click a button that flourish/swashy graphic looks like it is unwinding or growing rather. I would like to get the same effect.. Its obviously a mask of some sort. I know who to mask, im just figuring its a mask that is animated somehow. Anyone have an idea? Appreciate any insight into this. Peace

-R

Quick Actionscript Ques.
Ok so im building a portfolio website and basically if you click on the art image it goes tothe next art image..I have it set up so the art images are buttons and when u click it, it is coded to goto next scene..On one scene however the art image is a movieclip (fading effect)...now how do you write the actionscript so if you click on the movieclip it goes to the next scene? I dk im right but...my guess is to put the MC within a button symbol? But I dk. Thanks guys.

UI Text Input Ques.
Ok so Im making a form in flashmx2004..I drag out onto the stage the UI compnent textinput box..now I want to make this box multiline but it doesnt give me the option to do so. Do I have to make input boxes in a different way?

Motion Guide Ques
Hi all,
Is it possible to create a motion guide, so the object connected to the motion guide is always in the centre of the screen.

What I mean is, if we were trying to go from point A to point B
we could see the full journey of the object travelling along motion guide in the centre of the screen.

A-------->--------->-------->------B

The sort of thing I mean is included, but with no motion guide instead, the car remains in the centre of screen and is able to move around the track which in turns moves the the track below.

Thanks for your time, sorry for the broken language. Hope you can help.

--------------
FLA = MM2004

<> QUICK QUES RE:Positioning After Dupe
Hi Im using a while loop and the dupliacteMovieClip() to dupe a certain number of my Mc's. I want to postion each duped Mc after its created with setProperty but I cant figure out how to do this within the same loop.
It complains in output box:

Symbol=playlist_Mc, Layer=Layer 2, Frame=1: Line 9: Expected a field name after '.' operator.setProperty(_root.playlist."box" + count, _y, vertpos);

Obviously I cant do the <"box" + count> bit, but how else can i do it?
(see code below)

Code:
onClipEvent(load){

var vertpos = 46;
var count = 0;
//create
while(count!=4)
{
duplicateMovieClip(_root.playlist.box, "box" + count, 1);
-->this doesnt work//setProperty(_root.playlist."box" + count, _y, vertpos);

trace(count);
count++;
}
//position
}

-Rich

Pleez Help With Random Keyframe Ques.
I have four different movie clips on four different keyframes (2-5) the first key frame has a clip with an invisible button over it. WHat I would like to achieve is onMouseover of the button in the first frame......I would like the playhead to randomly gotoAndStop on of the other frames (2-5). To give the illusion of random movement. The on mouseout return to the first keyframe. any help greatly appreciated....either a .fla I can study or some AS would be great.

Probably Simple LoadMovie Ques. For JPEGs
I have a target MC that I want to load some JPG's into in my Flash Movie. The Target MC's dimensions are 650x500px. The JPG's are the same. When I attempt to load them, I can notice that something has changed in the tone of the movie clip (I had the target MC a grey color then that color disappears) but the JPG does not load.

I tried a smaller JPG, like 1/4 the size, and it loaded OK. ANyone have a suggestion?

Action Script Ref Code Ques
Hello i keep getting this this action script error when i attempt to render this swf could some one explain what this error message means ......i am not sure what the variables are looking for ....... the version is Flash 8 - the action script is below and the error message is below that.......

#include "lmc_tween.as"
//classes are loaded on this frame
var state:com.collection.State = new com.collection.State(this);
// start program
var main:com.collection.Main = new com.collection.Main(this)
//
bg_img.tween("_alpha",100,1,"linear",.5)
stop()

Error message (below)

**Error** Scene=Scene 1, layer=actions, frame=5:Line 1: Error opening include file lmc_tween.as: File not found.
#include "lmc_tween.as"

**Error** Scene=Scene 1, layer=actions, frame=5:Line 3: The class or interface 'com.collection.State' could not be loaded.
var state:com.collection.State = new com.collection.State(this);

**Error** Scene=Scene 1, layer=actions, frame=5:Line 5: The class or interface 'com.collection.Main' could not be loaded.
var main:com.collection.Main = new com.collection.Main(this)

Total ActionScript Errors: 3 Reported Errors: 3

Action Script Ref Code Ques 2.0
Hello please see this link it is a follow up to the thread i created before....i am stil trying to figure this error out when i generate the flash swf it works but not properly... below is a link to what the swf looks like there are buttons that should show and i get this message (shown below) in the flash error box that says (output) when i hit ctrl+enter to generate the swf.... any suggestions...?

b1,b2,lgText,redText,arrow,a:link,a:hover
yo

http://www.amjaydesign.com/mainCol.html

http://board.flashkit.com/board/showthread.php?t=744878

Simple Ques About Blue Border Box
I'm using flash 8. When you draw something or import a picture flash 8 puts the blue border box around it. Well mine is gone. If I draw something and click on it it is a broken shape. How do I get the blue border box back?thanks

Loading Clips Into Levels? -quick Ques
Hi, I need a quick bit of code or at least somebody to give me an idea on how to actually have a clip load itelf into a specific level depending on the value of a variable. I want to do this as my duplicateMovieClip() code is putting MC's on higher levels than other elements (other Mc's) in my movie, and one of these elements in perticular needs to be the 'highest'.

I tried using setProperty() as below but it doesnt work, flash complains (I gather it doesnt consider '_level' as a property?)

Code:

setProperty(need2BHighest_Mc, _level, highestLevel);

Any help appreciated

Html Code Inside Flash Ques
I have a client who wants me too put some html inside the flash actionscript. He's not sure it will work and I'm not sure if it's possible or how to do it. Here's the code any suggestions thanks

<form action="/gift/save/1234" enctype="multipart/form-data"
method="post">
<input name="file" type="file" />
</form>

Double Loader & One Instance Level Loader
Just sharing what I figured out.(which wasn't much but hey figured I'd post it anyway)

TASK1
I needed a preloader to load two seperate MC's into levels 1&2. Level 2 contains the interface which would change the MC on level 1.

TASK2
Once these two initial movies were loaded I then needed a single instance of a preloader that I could call upon for each subsequently loaded movie on level 1.

All the MC's have linkages so standard loaders would not start until 30%-40% of the MC was loaded.

I used a couple of files from oldnewbie.

http://odin.prohosting.com/~oldnew/f...ng/preload.zip

For TASK 1 I used the code from the above file but modified it a little.
I simply duplicated every line that referred to containerMC and called it containerMC2.Then at the end of the script instead of loading a single movie into level 0, I loaded the 2 MC's I had previously loaded into the containers onto levels 1 & 2. There's probably a much better way to do this - but it works

IF ANY OF YOU HAVE A BETTER SUGGESTION OR A WAY TO PRELOAD 2 MOVIES WITH LINKAGES INTO SEPERATE LEVELS WHERE THE PRELOADER MOVES FROM "Currently preloading movie 1" to "Currently preloading movie 2" WOULD BE AWESOME.

For TASK 2 I used another file from oldnewbie (though I can't recall which thread I found it in).

It's a One Instance Preloader for all subsequently loaded swf's.

The button code for loading a movie:

on(release) {
_root.preloader.gotoAndStop(2);
loadMovieNum("One.swf",1)
}

The preloader code:

FRAME 1

stop();

FRAME 2 (where the symbols are - same symbols as in the .zip file above)

this.onEnterFrame=function(){
//trace the percentage of the movie that has loaded
percent=(_level1.getBytesLoaded()/_level1.getBytesTotal())*100;

if(!isNan(percent)){
//trace(Math.ceil(percent)+"% loaded");
if (percent == 0) {
percent_display = "";
} else {
percent_display = Math.ceil(percent) + "% LOADED.";
}
this.loadbar._visible = true;
this.loadbar._xscale = percent;
if (percent > 1) {
this.reelmc._visible = true;
}
_level1.stop();
}
if(percent == 100){
this.gotoAndStop(1);
delete this.onEnterFrame;
this.reelmc._visible = false;
percent_display = "";
this.loadbar._visible = false;
_level1.play();
}
}
stop();

That's it. If you can use it, great.

Simple Loader Fails When Loading In An .swf Containing The Loader.
Sorry for the complicated topic. I got a .swf that loads in other .swfs. Rather than figuring out how to make a loader for loading .swfs I thought I'd just use a simple loader in the .swf I'm loading.

However, it doesn't work. It starts fully loaded but doesn't finish. Heres the AS:

ActionScript Code:
_root.stop();
PercentLoaded = _root.getBytesLoaded()/_root.getBytesTotal()*100;
if (PercentLoaded != 100) {
bar._xscale = PercentLoaded;
} else {
_root.play();
}

Anyone got a clue? Or would anyone be willing to point me in the direction for a very simple .swf loader.

thanks!

Simple Loader Fails When Loading In An .swf Containing The Loader.
Sorry for the complicated topic. I got a .swf that loads in other .swfs. Rather than figuring out how to make a loader for loading .swfs I thought I'd just use a simple loader in the .swf I'm loading.

However, it doesn't work. It starts fully loaded but doesn't finish. Heres the AS:
ActionScript Code:
_root.stop();PercentLoaded = _root.getBytesLoaded()/_root.getBytesTotal()*100;if (PercentLoaded != 100) { bar._xscale = PercentLoaded;} else { _root.play();}

Anyone got a clue? Or would anyone be willing to point me in the direction for a very simple .swf loader.

thanks!

Loader Page - Web Site Starts Behind The Loader
Hey Everyone...

i ran into a very odd problem... to loader page on this site:

http://www.onefortheditch.com/new/loader.html

works fine, except the fact that it doesnt stop the web site from playing while its loading. the web site plays the splash page in the background while its loading...

Any ideas what would be causing this? I use this same feature on my personal site, and it works fine, so i compared codes, and i cant see anything wrong.

Heres the native files if anyone wanted to check it out:

http://www.onefortheditch.com/loader.zip

Thanxs in advnace!! :)

Random Flv Loader + Radom Swf Loader
so i am making a flv player with an flv ad at the beginning, the main flv in the middle, and a swf ad at the end. the issue i have is that the flv ad at the beginning has to be randomly selected from a short list of flv ads in a network folder and the swf ad at the end is a click-able flash animation that has to correspond with the flv ad at the beginning.

so for example:
i have a video flv and swf ad pair for a window company, a restaurant, and a shoe store. when someone loads the video player, the shoe store flv ad is randomly loaded, the main video plays, and at the end, the click-able swf shoe store ad loads.

does that make sense?

THANKS!

Loader Insid Other Loader,how Loadmovie?
Hello

on the stage i have a loader* that shows a movie,in this movie there is a loader# too. in second loader# there is a button that by clicking it, the movie shown in first loader* must be changed.

please tell me how can i doing this with actionscript.........

cheers

Loader.unload() Not Available When Loader Is Not On Displaylist?
HI

I have a preloader swf file that loads in different swf-s using the same Loader instance.
However before loading in the next swf, I'm trying to call Loader.unload()
But it fails since the Loader object is not on the displaylist...
What happens to the data that is loaded with Loader? Is it replaced when Loader.load() is called next time?

ActionScript Code:
public function contentloaded(event:Event):void{
TweenLite.to(loading_mc, .5, {alpha:0})
cont = event.target.content
addChild(cont)
}
public function loadnew():void{
loader.unload() // Error #2025: The supplied DisplayObject must be a child of the caller.
if(cont){
removeChild(cont)
cont = null
}
showloader()
loader.load(new URLRequest(file))
}

Loader Or Loader Context Problem
I have two swf files, each one almost with the same classes, the most important one is a Singleton class, each swf does "singleton.getInstance()" . The diference is that one swf is like a container and the other one is like a module.

So when the container loads the module from an absolute path like loader.load("file://c:/modules/module.swf") or loader.load("

Using Stage Properties When Loader From A Loader
im doing a preloader that creates a var of the type loader and then loads another swf and add it to the stage with addChild, the problem is that the loaded swf cannot access stage properties and if i try to use them i get a #1009 runtime error, heres the code

----------PRELOADER-----------
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(Event.COMPLET E, done);
l.load(new URLRequest("test.swf"));
function done(e:Event)
{
addChild(l);
}
--------------------------------

and heres the test swf that is very simple
--------- test.swf -------------
var N:Number = stage.stageWidth;
trace(N);
--------------------------------

Hope someone can help this is killing me x.x

URL Loader & Loader LIMIT?
I'm trying to create photo gallerys and have run into a problem.
I have about 30 thumbnails that i wanted to load but the loader only loads 18 and the rest give me URL not found errors?

SO my question is does anybody know if there are size limits for the loaders??

Thanks

[loader] Load Jpg With Loader?
Hi, I making my website and trying to load jpg into a movieCLip which will holds all of my loaded jpg images.

I have a MovieClip called "holder"

and I want to load img into this clip. so I wrote

ActionScript Code:
holder.loadMovie("myPic.jpg");

this part I had no problem, but the thing is that How do I apply a preloader to this? I mean if this image is IN the movie, then I can have a preloader in the first frame and load this pic, but the thing is that I'm now loading this images directly from folder, how do I have a preloader for this?...

I tried this

Frame 1 preloader
Frame 2 load Image code...

just...you know what I mean?...when you load a image directly from folder, can you apply a preloader for that?...I stood up so late only because of this question..makes me so awake...HELP!!! I wanna sleep...

Loader.content.width Or Loader.width?
whats the difference, if there is any?
between:
loader.content.width and loader.width?

LOADER HELP, PLEASE...
I have made a preloader based on the tutorial "advanced flash preloader" by Cathode. It works well except for one problem. When the file finishes loading it jumps to the last scene in the movie, rather than the first
...why?

The action command for the true statement is:
nextScene()
I tried putting a " _root.gotoAndPlay() " in there instead, but it still jumps the gun.

I need to resolve this muchas quickus, any help would be greatly appritiated.

_thanks.

Pre Loader
hi all...
i was wondering how i could use the pre loader from http://www.flashkit.com/movies/Anima...01/index.shtml on a site i was playing arround wif. Plz tell me in detail as i am new to flash thank you

sooner or later i have to learn to make them too

Pre-loader
I have incorporated a preloader into the site and it works fine but....... I have a looping background movie and everytime the background movie goes for another loop the pre-loader kicks in again...any suggestions?

Pre Loader
I am a complete n00b to flash 5. I made my first flash presentation and ist up and running on http://www.csnb.cjb.net adn i want to make a preloader for it so it loads it up b4 it plays it, but i have no idea how to do it. Ne help would be nice

Thx

MC Loader
how does one preload MCs also....If I want to show a loading sequence for a Movieclip....ie a loader bar for a MC how do I do that.Can this be done if the movie clip is directly taken from library rather than placing it on the stage

thanks

Loader Help
does anyone one know a link to a site that tells how to make a loader? I've been having troubles with this for awhile!

Loader
can anyone help me with my code:
this is the code of my "menu" MC:

if(loading){
if ( _root.film.getBytesLoaded() == _root.film.getBytesTotal() ){upperMenu = true;}
else{_root.menu.upperMenu=false;}

_root.createEmptyMovieClip("loader",2);
with(_root.loader){
beginFill(0x000000);
lineStyle(1,0x000000);
moveTo(614,340);
lineTo(614,360);
lineTo(700,360);
lineTo(700,340);
lineTo(614,340);
}

}
if(upperMenu){
if(this._y>=hb){this._y-=5;loading=false;removeMovieClip(_root.loader);}
else{upperMenu=false;loading=false;}
}

AND THIS OF FUNTION laden(activated by a button):

MovieClip.prototype.laden=function(knop){
film.unloadMovie();
switch(knop){
case "info":loadMovie("info.swf",film);break;
case "event":loadMovie("event.swf",film);break;
case "fotos":loadMovie("fotos.swf",film);break;
case "label":loadMovie("label.swf",film);break;
case "forum":loadMovie("forum.swf",film);break;
case "contact":loadMovie("contact.swf",film);break;
}
_level0.menu.loading=true;

}

what I want is to load a one swf for each button. and to make a preloader in actionscript. what the problem is, is that the if(upperMenu){... plays, while it is not supposed to. this means if I click a button, an swf starts loading, but I don't see the "loader" MC (black square), and the Menu Mc jumps up by 5.
I don't know If the problem is clear, but I could sure use some help.