Flash :: Placement In Page

Flash Placement In A Page
Hey folks,

First off - excellent site. It actually shows how to do all the fancy stuff that everyone got into Flash in the first place for.

I have a bit of a noob question. I created a layout in PS, sliced it, and exported it as HTML and PNG's. I edited this in Dreamweaver MX to centre it up (basically putting it into a big table). My plan was to delete the main part of the layout, and use the image as a background for a Flash movie, so the whole thing would look like a nice image in the middle of the screen. But! When I put the movie in the page and view it, the whole thing is skewed by about 5 pixels , misaligning my images and ruining the effect.

I've used CSS to remove all padding and borders, but I can't think of what else to try. Any ideas?

thx muchly

Movie Placement On Html Page
i've recently started designing flash websites but i still know very little scripting. i know even less html so this question is pretty basic:

i want a flash movie to open within an html page that has a top border and a few buttons. all of the navigation on the actual site will be done within the flash movie.

i don't know how to place the movie on the page where i would like it: just below the html border, and i want the entire page and movie to resize to fit screen resolution. I know that i can vaguely place my movie using the publish settings but i think i need some html code for this so that i can have buttons (linking to email, etc) on the border in html.

i know i've just made that sound way more complicated than it is
anyway

help would be appreciated

thanks
sea

Flash Elements, Page Placement
I see more and omre pages that seem to have flahs elements scattered on the page in a dynamic manner. They will move with the size of the window. I have done this a number of times in HTML with CSS with HTML elements, but not with Flash. I am curious, is it multiple .swf's working together and place independently into the HMTL, or is there a way to give Flash elements CSS style attributes so that they will mofe throughout the movie? I will paste some examplres below, just let me know how you think it's done. Thanks folks.

http://europe.nokia.com/fitsyou

Some of these also have scaling Flash and fullscreen dynamic Flash.

http://www.cokesideoflife.de/html/flash.html

http://www.ownyourc.com/

http://www.fjallbrynt.nu/kampanj/

http://www.selftitled.ca/

How To Format Dynamic Text On The Page As Regards Placement, Etc?
I'm attempting to have a dynamically populated piece (XML the best bet?) which will contain three headings populated by a number of bullet points (the exact number changes with each instance) of different lengths.

How can I pull this information out and format it properly (I wish it was HTML since that would be easy with DHTML)?

Please see attached file to see the format I'm looking for. I want the module to be able to tell how many bullet points there are, and space things accordingly based on the number of bullet points and their respective lengths. Also, is it possible to attach a graphic in place of each "bullet"?

Again, please see attached file for reference.

Many thanks in advance. This has really been stumping me and I can't seem to find anything of comparison in the existing threads.

-B

Placement Of Flash Movie On Html Page
this may be a silly question... but if i have a html page styled with css... and i would like to put a small flash movie directly into the page placed within a div how do i work that out? i tried just cutting and pasting the object tag and contents but it's not working out so well...

this is probably an easy one but... help?

MC Placement
on (press) {
if (_root.inputtext1.text == "go1") {
_root.attachMovie("correct", "correct", 2);
_x=205;
_y=69;
}

this script is not placing the "Correct" MC where I am specifying...what am I doing wrong?

Help With Placement
Hello.

I have a quick question. Let's say i have a menu set up, kind of like this one:
Click here for menu

So far there's no problems. This is where things get complicated. I have both Frontpage 2002 and Dreamweaver MX. Now, the thing is, i want to be able to place the navigation to the left, and still be able to place images, text, etc to the right (and even on top of the flash document).

You see, i had a little problem with my previous site with that.
My site

As you can see, i had to place to the next as part of the navigation (made in Fireworks MX).

So to put my question in simpler terms, how can i set up my site so i can have my navigation set up to the left, and still be able to use the rest of the page itself to do anything with.
EX
|-----| |-----------------|
| | | |
| | | |
| | | |
| | | |
| | | |
|-----| |-----------------|
Navigation Pictures placed using FP/Dreamweaver

Last but not least, am i able to publish a website using BOTH DW and FP?

Thank you,
ApersonCL

MC Placement
I am generating MC's using the attachMovie() command.
I can control the _x value from within the clip, but when I code outside the clip to control the _x value, I get an "undefined" trace.

outerMC.tagMC1._x = (iCount-1)*pWidth

==========

Could this be because the first MC is also generated using the attachMovie() command?

Is it possible to control the _x property from outside of 2 attached MCs?

Or is this some other problem?

-------

Placement -
I was wondering how to place my movie on the lower bottom side of the webpage.
thanks

Odd Placement
hi,

well i have made a full screen flash page, set the publish things to 100% height and width, and i use the script:

Stage.scaleMode = "noScale";
Stage.align = "TM";

to make it full screen.

Everything is sexy, however, when i open the html doc its in, the entire flash bit it moved right like 400pixels-ish and the left are is black html.

WHY! i cant figure it out this hasnt happened to me on ne other occasion where i use the fullscren, no sclae script. its very odd

Browser Placement
My SWF is 650x400. What HTML or JS do I use to have the swf centered at different resolutions. I looks good at 800x600 but the higher resolutions it goes to a corner.

RemoveMovieClip Placement In The MC?
thanks to Little Ben, I was able to get the duplicateMovieClip(s) placed under a mask on the main timeline :-)
however, I'm trying to use a button on the main timeline to turn off the duplicate movie clips that appear behind the mask. I've looked at the forums and found items that are close, but they don't mention where to put the removeMovieClip action. is it placed in the duplicating mc timeline? or is it placed in relation to the "holder" with the mask that is on the main timeline?
your help with this "beginner glitch" would be appreciated.
best,
andrew

Swf Placement Using Button
having problems loading an swf file using a button

I want to be able to load he swf using the x,y position that I set in the button action

say my buttons at 0,0

and I want the the swf file to load at 0,200

also, when a swf file loads does it position by the top left corner or by the center of the swf?

thanks for any help

AttachMovie() & _x, _y Placement
Problem:
I have a global function on my main timeline that looks like the following:

Code:
_global.change = function(mc){
_root.attachMovie(mc, "current", 69);
_root.current._x = 395;
_root.current._y = 60;
};

It's real basic, I use it all over the site. BUT, I have a list column of buttons that each have that function applied to it.

i.e

Code:
on(realease){
change("_sla");
}

When the site opens I have change("home"); on the last frame which loads the initial content into place. From there, the user can click the buttons browse other areas. For some reason though, if I click the 2nd to last button and then the home button, it loads the "home" information @ 0,0 rather than 395,60.

Anyone up for this?

MC & Placement Question
I made a movie...the movie has MCs that are called in by the "attachMovie" command. How can I determine exactly where on the MC stage to place the image/animation so that it will show up exactly where I want it to on the main stage when I publish...as of now, I've just been nudging it, then testing it, then nidging it again, and so on until it's in the correct spot. When I set X & Y coords based on the main stage, it's not in the right place...what am I doing wrong...?

SWF Html Placement
I have a very tight frameset that I need to use, my movie runs in 800x600 and I have exactly an 800x600 frame to fit it in. But I also need the html to make sure the users have swf 6.0 so they can run my movie. I have tried setting a table in the page and putting the movie in the top left corner of it but there is still a gap surrounding the top and left edges. So far the only way I have found to remove this gap is if I set the frame to run the movie and not any of the html that checks for the correct version. Is there a way to get the video in the top left or could I possibly put the checking code on a different frame? Thanks

Placement Of External .swf
i have an external .swf i am loading, and it is smaller than my main movie. is there a way to place it at certain corridnates in the main movie?

Thanx,

Duplicated Mc Placement
Hola all,
I am basically an actionscript dud.
I would like to have a little mx swf that duplicates the same mc into a grid form. Thus I have put together the following piece of code, which I have placed in the first frame:

Quote:

ypos = 0;
xpos = 0;
i = 0;
j = 0;
while (j<6){
while (i<10) {
duplicateMovieClip("dot1", "dot1" add x, x);
setProperty("dot1" add x, _x, xpos);
setProperty("dot1" add x, _y, ypos);
x = Number(x)+1;
xpos = xpos+50;
i++;
}
ypos = ypos+40;
j++;
}

Now I'm sure this is terrible code, but it also doesn't work.
All I get is the top line of mcs? ie I get 10 across the top row, but then the yposition doesn't move down and start again?
I suspect it will be something simple, but I would really appreciate some help?

Thanks

E

Loadmovie Placement
I am relatively new to flash and am trying to load various swf movies onto the same page in the same place and resize each to the same standard size. I have tried creating a target movieclip called "dropzone" and loading the movies to this target but can't get it to work.
Here is the button action to load the swf movie named "escudospromo' into the movie clip.

on (release) {
loadMovie ("escudospromo.swf", "dropZone");
}

thanks in advance for any advice on how to load movies to specific locations on the page.
Hugh

Random Mc Placement
Hi all... hope someone can help. This is probably pretty easy.

I have some real simple code that randomly places a pop up m/c.

setProperty(popUp, _x, random (800));
setProperty(popUp, _y, random (600));

What I'd like to do is place that pop up between a range of numbers that is smaller than what allowed for above, i.e.

setProperty(popUp, _x, random (100-700));
setProperty(popUp, _y, random (100-500));

although this particlar example doesn't work. Does anyone know what I should do to make it work?

Thanks in advance...
-B

Help With Random Placement
Hey i need a little help with actionscripting with random placement.
Ok i have a rain effect however, i want it to pick a random spot between an area. I have it so it plays the clip wait, plays again, however i cant quit figure out the 'randomness'
can some one please help!

Preloader Placement
If I were loading swf's into diffrent levels where would I put the preloader. Would I have to put a preloader in each of the diffrent swf files or could I just have one that gets called up when a certain movie is loaded.

Random Placement Of MC ?
I want to place a MC randomly on the stage with attachmovie
- BUT I want the _x an_y min and max coordinates to be constrained -
or constrained to a box on the stage
- with random alpha states as well - -
I've seen this before but can't figure how it's done -

Button Placement ..
ok..

if i use load movie commands...in my document...
it covers up any buttons...on the base of my stage..

so the buttons work...they just invisible.

i tried to import a button...using load movie...
but the actions i gave it ..dont work once...it is imported

so ...can you load buttons..as movie clips...and make them work..

or am i way off...here eyeconimaging@aol.com

phil thanx

Help With Drag And Mc Placement
Hello all - I have attached an example swf below. What I am trying to figure out is the following:

I want to have a draggable mc which holds thumbnails of pictures for a portfolio. (I know how to do this part)

What I am trying to figure out is that I want an expanding mc to look like it is coming from the thumbnail that is selected and expands to the center of my movie. If you look at the example attached, when I drag the thumbnail mc to a different part of the stage I don't know how to have the expanding mc also start from the new position and expand to the center of the stage.

Does this make sense?
Any ideas would be greatly appreciated.

Thanks

Random Placement Help
i want a movie clip to show up at a random spot here is how i did it
timer = getTimer();
timewait = function () { space = random(1);if (space == 0) {_root.man._x = 90};{ space = random(1);if (space == 1) {_root.man._x = 0};}};
setInterval(timewait, 2000);
;

and im not sure if this works or not, i want to to every 2 seconds show up at the random spaces
and if this does work, can someone explain my code to me, cuz i jsut kinda copied it from a differnt thing i downloaded

Image Placement
Hi,
I was just wondering if there was a way to place 16 images all origionaly 1600x1200 in to a flash document automaticaly. Because if i did this by hand the images would never be the same size. Is there some kind of script or something.

Or is there a way of selecting many images and resizing them all at once ? I would also like to use the an effect so when you so called rollOver your mouse the image enlarges and when you rollOut the images decresses back to normal size.

I would be greatful if any one could help me
Scott

Rotation And Placement Of A Mc
I have a movieclip (picture of a switch) that I want to rotate when a button is pressed. I want it to rotate back when a different button is pressed. I am using the code below on one of the switches. It seems to rotate the switch but it also moves it. I don't think that it is rotating about the center of the movieclip which is what I want.

Code:
mcXcoord = getProperty("mcModeSwitch", _x);
mcYcoord = getProperty("mcModeSwitch", _y);
mcModeSwitch._rotation = 45;
setProperty("mcModeSwitch", _x, mcXcoord);
setProperty("mcModeSwitch", _y, mcYcoord);
The attached file shows how the switch will move when rotated. Can someone help me align this so that the switch rotates on its center or at least appears this way.

Thanks

Grid Placement
Hey freinds.
So, what I have is a basic script to make an object snap to a position on a grid depending on where the mouse is:

For refernce sake, 'map', is the grid in which the script is applied to, being a small block, 20 by 20px.

code:
onClipEvent (enterFrame) {
_x = math.round((_root._xmouse-10-_map._x)/20)*20+10;
_y = math.round((_root._ymouse-10-_map._y)/20)*20+10;
if (_root._xmouse>_parent.map._x && _root._xmouse<_parent.map.mapwidth+_parent.map._x && _root._ymouse>_parent.map._y && _root._ymouse<_parent.map.mapheight+_parent.map._y ) {
_visible = true;
} else {
_visible = false;
}
}

However, when I make the map move, (just adding _parent.map._x++ on the script above), the object snaps to a grid that isnt relative to the map. So while the map creeps away, the object stays in the one place.

help appriciated
thanks everyone

Work Placement Help?
Hi all hope all's going well with you.

This is my problem I’ve just finish my 2nd year at university studying interactive multimedia and now need to start a Work placement job in about a months time around the LONDON or down South UK area, doing web/multimedia design. The obvious problem is I can’t find one! even with my skills and cheap asking wage.

Just wonder if any you were working for a company or knew of any companies which were in need of a placement student, or had any helpful advice on how to get a placement job or where you did your placement. The whole thing is getting quite depressing.

My portfolio is available at http://www.jonathanhammond.com

Any help would be really great

thxs a lot

Jon

Blood Placement
hi all,

im making a shoot-em-up and i was just wondering whether you can put a patch of blood on the bit of the body that you shoot at or do you have to have blood in the same place each time.

thx bye

Function Placement
I've been using a function to resize my stage, and it worked without the _global prefix, when the function was on the same layer (one long script). It started getting ugly quickly though, so I decided to break the code up to two seperate layers; actions, and functions.

However, despite being on the same timeline and the same single frame, the stage resize function would only work when prefixing myStage with _global but the function won't execute when the stage first loads ... only when it is resized. I even ran a trace in the resize function, and it runs when the movie first loads ... but the content object does not size to 100% of the stage width, until I resize the stage.

Anybody have an incling as to why this is? It seems odd to me that it all worked in the same script window, but not when seperated over two (it isn't like the're on different timelines).

Thanks for any clarification.
I'm using MX2004.

Actions Layer

Stage.scaleMode = "noScale";
Stage.align = "LT";
_global.myStage = new Object();
myStage.onResize = function() {
moveItems();
};
Stage.addListener(myStage);
myStage.onResize();

Functions Layer

function moveItems(){
content._width = Stage.width;
content._height = Stage.Height;
}

Placement Of MCs Via AttachMovie()
Good morning citizens! CoachZ here.

I am creating a simple Pin-a-Tail-on-a-Donkey style game by attaching a movie clip (tail) via attachMovie() to another movie clip (donkey).

Attaching the clips is easy enough but the tail is always placed in the center of the donkey's movie clip.

Is there a way to alter the default attach point so that the tail will be placed onto the donkey at the cursor's current X,Y location rather than the center point?

Cheers!

Placement Of Duplicate Mc's
Hi group
I'm duplicating an mc and placing them in rows, at the moment I have an if statement that set's them out in 2 columns running down the page,
what I'm trying to achieve or understand is how to get them to duplicate in which ever way i want i.e 3 or 4 columns, also to achieve some kind of paging function within flash to only show 10 records at a time.
This is what I have so far, I'm using mx 2004
[as]
var MyData = new LoadVars();//puts LoadVars object into the var nav
MyData.load("http://localhost/eden/scripts/Ascript/photogallery/test.txt");

MyData.onLoad = function(success){

if (success){

var amount = MyData.amount;

myY = 10;
myX = 40;
for (i=0; i < amount ; i++){

duplicateMovieClip("target", ["target"+i], i);

_root["target"+i]._y = myY

loadMovie("http://localhost/mypath/"+MyData["imageName"+i],["target"+i]);

if ((i+1) % 2 == 0){
myY +=90;

}else{

_root["target"+i]._x =_root["target"+i]._x + 100;

}
}
}
}
[as]
Can anyone shed some light on this
or point me in the direction of a tutorial.
Thanx in advance

Placement Of Preloader
I have two empty movie clips, mc_menu and mc_monitor. mc_menu displays the menu for my webpage. Any content or the preloader should be displayed in the mc_monitor clip. The enter button loads menu.swf into the mc_menu clip. When the menu is loading I would like the preloader to be displayed in the mc_monitor clip. If the user clicks on anything in the menu, the content is loaded into the mc_monitor clip. Where and how should I setup the preloader? What should the actionscript look like?

Right now the progress bar is currently is in its own movie clip called NTSC, but I haven't got the preloader on becuase I wanted to find out the best solution for this before I put a lot of work into it. I would like the preloader to show up in the empty movie clip that the movie is loading into. Thank you for any assistance. This is the only big problem left that I need to solve.

This is complicated, so here is a flash example of how its setup:
http://home.cogeco.ca/~erikwithak/example.rar

Cursor Placement
After clicking on a button is it possible to replace the position of the cursor to specific co-ordinates?

Is it simple code or something else?

Any suggestions would be great!

[F8] Flash Placement
hi i have ceated a website using flash 8 and i will like to know how to place it so it will appear in the middle of the browser as opposed to the left or right thanks

[F8] A Bug With The Stage Placement?
As far as i know, 0,0 is the coordinates of the center of the stage am i right? It seems to be true thus far........

Now THIS comes along and changes all that!

Ok, I figured maybe the best way to learn stuff would be to revisit the basics in many tutorials in the help file i never tried.......tutorials are supposed to help after all.......apparently this one's a rebel.
The first one I've tried (supposedly 30 mins), is a FMA of some cook place (refer to help file under "Tutorial: Building your first flash application", and for some reason with this project, 0,0 is not even on the stage, its to the left of it!
So, when i adjust the positions to 0,0 like it tells me to, it doesnt look like in the pictures......its halfway on there in fact..........
I've stopped this tutorial until i know whats wrong and how to fix it, cause my version is far from what the finished should look like!
Please help a newb in need!!! Thanks!

Placement Issues
Hi

Lets say I have a loop counting from 1 to 15 and creating an instance of a checker piece each time, ( it places it and sets properties etc ).

Now, each of these pieces acts exactly the same, can be dragged with a set of constraints ( not important to this ). When the pieces are dropped that snap onto the playing board into the correct positions.

Now the way this works is on the board there are a set number of drop points that trigger _droptarget . The problem im having is if there are already pieces on this point, if another is dropped it misses the actual place on the board as the drop target and is replaced with the top piece on there... any way around this?

[F8] Browser Placement
i posted this on the flash 8 board but received no responses. sorry for the repost.

i completed a portfolio site (now a placeholder since i'm rebuilding) and was horrified to see that unless input the exact url (cosmicbeanbag.com) in a browser search window, my site is nowhere to be found. inputing my name or the sitename sans .com (cosmicbeanbag) returns posts i have made to other forums and message boards with my homepage nowhere to be found.

when creating the site i titled the page in the document properties window and gave it a description with my full name and the site name. why doesn't this page show up at the top in a google search?

how can i title the file so that a browser search of either my name or handle lists my homepage at the top of the first page?

thanks,

k

Random MC Placement
I'm writing code a make a random static starfield behind an animation (the animation is not code, all placed/tweened images) My animation is getting bulky (i.e. over 35k) and I am trying to find ways to get the weight down, and replacing bitmaps with code seems a good start.

I wrote something, and suprise, suprise! I doesn't work.
I'm sure I can find code somewhere online to do what I need, but I'm stubborn and want to know why the things I write don't work.

I made a new animation, and made three circles of different sizes, and gave them instance names sStar, mStar, and bStar. Then i placed this code on frame 1:

---------START CODE-------

var i:Number;
var stars:Array = ["sStar", "mStar", "bStar"];
var currentStar:String;
var xPos:Number;
var yPos:Number;

for (i = 0; i < 100; i++)
{
currentStar = stars[Math.floor(Math.random()*3)];
xPos = Math.floor(Math.random()*728);
yPos = Math.floor(Math.random()*90);
duplicateMovieClip(currentStar, currentStar add i, i);
setProperty(currentStar add i, _alpha, Math.floor(Math.random()*100);
setProperty(currentStar add i, _x, xPos);
setProperty(currentStar add i, _y, yPos);
}

------END CODE----

Im fairly certain the reason it doesnt work it because I cant assign movie clips as strings, but I cant figure out how to set up an array of movie clips to be randomly accessed. Could someone please let me know what to do?

Thanks.

.ryan.

Preloader Placement
Using Flash MX 2004

Hi, where do I place the preloader in the timeline? I have a portfolio and I have an image in frames 1, 3, 5, 7 etc. do I create a new layer named "preloader" then create a keyframe in frame 1, 3, 5, 7 etc and place the preloader in those frames or do I put the preloader in the frame before the image?

Thanks

PS if someone could upload a simple .fla file showing their preloader place ment it would help me to understand this a lot. : )

Hittest Placement
Okay, I have a menu/submenu. On the rollOver state of the button on the main menu I have an attachMovie action. The attached mc contains two more buttons. I want the attached mc to be removed when the cursor is not over either of the two sub-buttons.

Someone recommended using hittest to accomplish this. This is the first time I've used hittest, so I'm having problems. Namely, where do I place the script for the hittest? Everything I've read so far says, to place the script on the instance of the mc where I want the function to happen, but because I'm using attachMovie to call the mc, there is no actual instance on the stage that I can write script to.

Any help on how to do this, or if there is a completely different way I should go about trying to accomplish what I want is greatly appreciated.

I'm including the file.

Graph Value Placement
I am trying to make a graph, the graph's height is 260px, so I need to place dots (values) according to the number passed to it.

What would be the best formula to place the value?

Conditionals And Placement Of AS
I've got two questions:

1) I always use a separate layer for my ActionScript, and I will have script in keyframes. That script will effect only that frame. Is there any way to have script that is effects the entire scene/movie (ex: a button), without scripting that for every keyframe?

2) I have 4 scenes, (Scene1, Scene2, Scene3, and Scene4). When I click a button in scene1 I want Scene 2 and Scene4 to play (but not Scene3). I also have a button in Scene4 that I want to play Scene3 then Scene1. It looks like I'm going to have to use an if/then statement. How then does one code and if/then statement, similar/like the one I'm trying to make?

Thanks for your help.

Movieclip Placement
Ok I have a movieclip which i am putting the following script on
onClipEvent (load) {
count = 0
operator = -2;

i = 1;
secs = 5;
down = stop;
}
onClipEvent (enterFrame) {

if (count <= alphaLev && down) {
while(i==1){// this allows the following code to execute once each time

operator = 0;//stop fade
i++;}

if(_alpha<=1){down= false;}//when alpha reaches 1 down is set to false so the count can increase again

}
else if(!down){//run when down is false
if(_alpha >=50){//resets variables when alpha reaches 99%
stop;
alphaLev = 50;
operator = 0;}

else{operator = 2;}
}

count += operator;
this._alpha = count;
_root.test = _alpha;//alpha value
}

I knoe its messy but i just edited a movie from the library.
Anyway the effect i'm after is simply to fade in a clip to specific alpha value. This works ok.
However, when i place the clip in the timline it flashes on and off quickly and then does what its meant to do. If anyone can tell me how to stop the flashy bit i would be eternally grateful. Cheers

Specific XY Placement
This should be simple.

I want to make a MC move to a specific X Y location using actionscript. Below is some code i am using to get the XY location and then move the ball by increasing the x and y. the reason i am using getProperty to get X and Y is because i want to be able to duplicate the movie clip and reuse it in different locations. So i got the x and y and i got it to move, now i want it to move to a specific x and y. So the end result is that all of my movie clips with this script attached, will move to the same location.

onClipEvent (load) {
ballX = getProperty(_root.ball1, _x);
ballY = getProperty(_root.ball1, _y);
this._x = ballX
this._y = ballY
}

onClipEvent (enterFrame) {
//this moves our clip 5 pixels to the right every frame
this._x = this._x+5;
this._y = this._y+5;
}

SWF Browser Placement
I have a swf that when loaded, is loaded below a header HTML div. There are two versions of the swf file. One is very thin height and one is quit long in height. When the thin one is loaded, it all fits nicely on the page, however when it's bigger brother is loaded it will extend beyond the lower viewspace of the browser. In the latter case, in IE 7.0 (others not checked yet) the view in the browser "jumps" down to the top of the swf, as if there was a page go-to in HTML. I would like the swf to load and, even though it has a greater height than the current browser display, to not impact where on the page the browser is currently displaying - i.e. I want the HTML header image to continue showing.

any ideas?

all help apprecaited.

bob

Edited: 05/15/2007 at 01:18:30 PM by Bob_Protools

Placement In Page

Hi, I have a flash movie in a table 100% height, how do i get this movie to be at the top of this 100% table without just using the return key to push it up in dreamweaver.K.

Hi, I have a flash movie in a table 100% height, how do i get this movie to be at the top of this 100% table without just using the return key to push it up in dreamweaver.

K.