Flash :: Shape Tween Imported Images

Shape Tweening Imported Images.
It's been a long time since I've used Flash 5 and I was certainly no expert ever, but, I could have sworn it was possible to shape tween images. I have no trouble shape tweening items I draw in Flash, but I cannot get the images to tween. Here is my sequence:
Open Flash.
Import first image.
Break apart first image.
Click on frame 15.
Insert keyframe.
Import second image.
Break apart second image.
Click on timeline between the two keyframes and select shape tween from the Frame panel.
I get the green timeline and the arrow but the tween doesn't work.
This was supposed to be a simple thing for a friend and I've already spent 3 hours pulling my hair out wondering why i can't make this simple thing work.
Any tips would be greatly appreciated.
Thanks
Chuck.

How To Shape-tween Between 2 Different Jpg-images
I try to make a shape-tween between jpg-image1 and jpg-image2. Image1 is slightly different from image2 so I want to make a nice transition. I understand that I first have to break both images apart so that they are vectorised. so that's what I did. Then I placed in a frame1 image1 and I selected shape in the frame dialog box. Then I went to frame 20 (or whatever), put a new keyframe there, deleted the image there (image1) and put image2 instead, which was also broken apart with CtrlB. But the shape tween doesn't work. What do I do wrong? Can anyone help?

Kippie

How To Shape-tween Between 2 Different Jpg Images
I try to make a shape-tween between jpg-image1 and jpg-image2. And I cannot figure out how to do it. What succeeds is a shap-tween between a rectangle (which I make in Flash) and an oval (which I make in Flash). But when I import 2 jpg-images (and place them in two keyframes) I cannot get the tween working. There comes a thick lightgreen-line with arrow but only the first image shows up in the first keyframe and the second image in the second keyframe and nothing in between. What do I do wrong?

(Jpg-image1 is slightly different from jpg-image2 so I want to make a smooth transitiion)

How To Shape-tween Between 2 Different Jpg-images
I try to make a shape-tween between jpg-image1 and jpg-image2. And I cannot figure out how to do it. What succeeds is a shap-tween between a rectangle (which I make in Flash) and an oval (which I make in Flash). But when I import 2 jpg-images (and place them in two keyframes) I cannot get the tween working. There comes a thick lightgreen-line with arrow but only the first image shows up in the first keyframe and the second image in the second keyframe and nothing in between. What do I do wrong?
(Jpg-image1 is slightly different from jpg-image2 so I want to make a smooth transitiion)

Can anyone help?

Kippie

Using The Same Shape Tween On Multiple Images
i have a symbol (movie clip) in a flash intro i am making. I have created a cool effect with a shape tween to the image and now i want to be able to have the same exact tween applied to other pictures that follow behind the first one. how can i apply the same tween to multiple images?

Creating Images To Use In Shape Tween...
hi,

i am try to make a button in photoshop with transparency around it which when rolled over will shape tween to a different shape.

i can get the transparency to work fine when i save it as a png but then when i try to break it apart so that i can use it in a shape tween, it still has the box around it (it shows transparent, but is still there) which makes the shape tween not work because the box hides the difference between the two shapes i am trying to shape tween.

does anybody know if there is something i can do to get around this?

im sorry if this is worded confusingly...

Shape Tween With Two Seperate Images
I've been trying to create a shape tween with two seperate images. I want the effect of the first image distorting itself into the second image. But the only effect I get is the first image distorting and then going back to it's original shape. If any one can understand this please help. I've inserted a copy of the fla file.

Shape Tween For Raster Images?
Hi, New to Flash, I understand the shape tweening applied to vector shapes (simple drawings) but it doesn't work with photos (well, I guess I don't know how it works). Precisely I would like to take an image and reduce its size and the effect is progressice (you can see the transformation). How would I do that? Thanks.

Shape To Text Shape Tween Not Responding
I wanted to know if anyone has encountered this problem or can see that I'm doing something wrong. It really doesn't look too complex and I've also done it before with no issue. I'm only running 2gb of ram, but I've done this plenty of times with no latency and for some reason recently it just won't work. I'm using CS3 Pro, AS 3

Set up:
Draw a square in frame one
create a blank keyframe on say, frame 30
write some text on frame 30
shape tween the square into the text

Results:
If I tween the square to a single character-no problem
If I tween the square to a sentence slow tween on preview and publishing
If I tween 3 paragraphs it will bomb out and go into...not responding and I have to shut down the program

Any thoughts?

Using Stop(); On A Shape Tween Of A Swapped Movie Clip Symbol Within A Motion Tween
Thanks a lot for your time. I'm new to actionscript, and language syntax and I never really got along to begin with so I appreciate any help in the matter.

Basically the title says it all - I made a motion tween in the main scene, made a movie clip symbol (to shape tween a gradient) and added a stop(); inside the gradient-tweened-symbol. I then swapped the movie clip symbol with the motion tween in the main scene, and got exactly the effect I wanted (the item moved, then tweened itself) but the stop(); seems to have no effect.

I know this looks like one of those "that idiot didn't google before posting" questions, but I've been looking for about a half hour with different permutations of stop, doesn't work, actionscript, and flash, and I haven't found anything that seems to target this problem specifically.

If you've got any idea what's going wrong, please feel free to respond or show me how to better seek help on my own. Thanks again.

Shape Tween Like A Motion Tween, Using Guide Layer
How if possible, can i make a shape tween behave and follow a set path (like using a guide layer)while morhping/tweening?

So far it seems as each time i try it always goes in a straight line from a to b and in this case that's not what i'm after.

From Drawing API Shape To Shape Tween
I would like to take the shape I created with drawing api and shape tween it into a square via a tween. How is this done?

I have searched, but cannot find a howto for this.

Thanks!

Shape Tween A Shape Into Text?
How do you do this. I want, for example. to make a simple square shape tween into the name, "Bryan". I fiddle with this, but it doesn't want to do it.

What needs to be done to get this to work.

Thanks
Bryan

Diference Between Motion Tween And Shape Tween
What exactly is the difference between a motion tween and a shape tween?

What's The Best Way To Do A Motion Tween And A Shape Tween At The Same Time?
Hi all,

I'm having some difficulty doing this. I have tried motion tweening a movie clip containing a shape tween but it just doesn't look right. Anybody have any ideas?

Cheers

Do I Use A Shape Tween? Mask? Motion Tween?
How do I make this arrow grow into shape? I want it to slowly appear...but not fade in...

it's hard to explain...but here is the arrow, hopefully you will understand what I want...

I tried using a mask, but instead of revealing the arrow little by little, it dissapeared little by little...(basically the exact opposite)...

I also tried putting a white box over it & motion tweening the box to reveal the arrow...but that didn't look good...

any ideas?...suggestions?

thanks in advance...

What's The Difference Between A Shape Tween And A Motion Tween?
Hi!
I just wanted to ask that what is the difference between a shape tween and a motion tween???

Not to bother you.

please reply me back

[MX04] Shape Tween And Motion Tween
Why do Flash doesn't allow ungrouped objects into motion tween and symbols into shape tween?

Change From Motion Tween To Shape Tween
I am trying to have a motion tween of some text move on the page and then change into a shape (i.e, a shape tween). I can't seem to make this work. I put a keyframe at each end of the motion tween and that works fine. Then I add another keyframe, delete the text and replace it with my shape. Then I select just those frames and add the shape tween but nothing happens. How do I accomplish this successfully?

Thanks.

Shape Tween / Motion Tween Problem
I must be missing something very obvious.

I have created a movie that draws a box, fills in the box with color and then is supposed to have the menu swoop in from the right. Mind you this is for learnnig, not cosmetic appeal Why is it when I use tweens I get the dotted line versus a solid line in the time line?

If you take a peek at the FLA it is obvious what I am referring to. I must be using the tween function or symbols in an improper manner.

I have attached the FLA.
Any help appreciated.
Thanks,
Kerry
www.skurz.com

Imported Bitmap Is Shape?
hi,

why is it, that, when I import a bitmap into the flash IDE and put it on that stage, and then trace it, it has a Shape type?

Can I access it as a bitmap? Or only when I load it using the Loader class?

thanks,

Jerryj.

Imported Photos Manage Trough Shape
Dear members,
I am a new member, and ofcourse this is my first thread.

I have a Flash 8. I have two photos of my two daughters; I imported the first one to the stage from my documents (pictures) then went to properties, Tween then chose Shape,
then I imported the second picture and did all the necessary steps to create a motion tween between the two photos (frames) but failed, there is no arrow between the two(frames) photos; which means no motion tween.

Is there a way to create a motion tween (shape) between the two photos?

I hope I expresse myself in a clear manner.
Nasser

Motion Tween & Shape Tween In Same MC? How?
I have created a shape tween on my first layer. On my second layer I would like to create a motion tween. But the motion tween says it will not occur with layers with shapes or more than one group. Can anybody enlighten me a little bit on this.

Thanks for any help that is given.

Derek

MOTION TWEEN Vs. SHAPE TWEEN
What slows down a .swf file more?

I have a site I'm re-doing from scratch, and I see quite a few places I got lazy and used a lot of Movie Clips. I could use shapes and have the same result. The main .swf did suffer from a little slow down...

I've read most of the literature there is on the net [on this subject], and I was wondering what first hand experience some of you had?

I know you're going to say, "It depends...", but I mean...

as a rule... which plays faster/more taxing on the browser?

G

Shape Tween
Why whenever I use shape tween does Flash automatically assume that I want EVERY single line to merge? Here's what I did:

Drew an odd shape (kinda like a rectangle, only one side is slanted), filled it in with a different color that the lines, and group it together. I grouped it so I could resize the whole thing together with the Free Transform tool. In my first frame of my tween the shape is very small. During the tween, it doesn't expand, it just shows the border lines doing all sorts of weird things inside the middle and then forming the shape. I tried both distributive and angular to no avail.

It's worked before, but it doesn't seem to be today. Is there any way to tell Flash that I just want it to look like its being EXPANDED and to not collapse on itself to reform the shape?

Shape Tween
When I use the shape tween function I notice that the corners of my objects twist around in an undesirable way. Does anyone know what causes this and how I can prevent it?

Shape Tween?
Hi

I created a shape tween and i wan't it during the tween to brighten - on frame 15. What script do i need for it?

Thnx

Shape Tween, When Should It Be Used?
Every time I use shape tween it ends up looking bad.
Could someone give a example where shape tween looks good?
or is it a useless feature?
Thanks

Shape Tween
1.) I brush stroke in frame one.
2.) I hit F7 in frame 10
3.) I make a different brush stroke
4.) I make a motion tween between 1 and 10
5.) Going into the properties area, I set the tween to shape tween.

A.) The shape tween is dashed
B.) There is no shape tweening
C.) It used to work in Flash 5.

Shape Tween
Hello all,

I've been out of flash for while (since version 5) and I seem to remember there was a way to shape tween an object to make it grow along the path that you define. I'm trying to make a tree "grow" from the base to the branches but flash just wants to skip from point A to B and garble it inbetween. Is there a way to mark the "growth" path or am I just old and crazy?

Thanks in advance!

Shape Tween?
Can you help?

I have drawn in Flash a pipe with a U shape type bend and i would like to fill the pipe with water starting at one end to the other.

Evertime I try to do this the shape tween goes outside the outline of the pipe. I ve had a play with masks but am getting a bit stuck!

Does anyone know of a good way to do this or a similar tutorial?

Cheers

Jemes

Shape Tween Help
For the life of me I can't get a simple square to shape tween into a distorted square. Have used shape hints to no avail...is there a secret I'm missing out on?

Thanks!

Shape Tween
Stumped here...anyone have any ideas.

I have a symbol on the stage, inside that symbol I made a layer.

Frame 1 stop ();
Frame 2-50 button normal state (shape tween to up state), stop (); on frame 50
Frame 51-100 button up state (shape tween to down state), stop (); on frame 100
Frame 101 to 150 button down (shape tween to normal state), stop (); on frame 150

I was going to use a "if" command in the AS and a "gotoAndPlay" command in the AS in frame 1. I know theres some flaws there but I cannot even get to the AS part of this. For some reason, no matter what I do, I cannot get the shape tween to work inside the symbol. Anyone have any ideas why this isnt working? I have shape tweens on the main stage in scene 1 and have no problem making them. Can I not create a shape tween inside a symbol?

As for the AS...is there an easier way to do this?

You can view the menu I am speaking about at http://fromthegrave.lunarpages.com/c...nic/start.html

Right now I just have a basic button symbol. When I tried this, the symbols were movie clips.

Thanks for the help in advance.

Shape Tween With AS
Hi guys, I have been searching for this on the messageboard, but I couldn't find what I am looking for.

motiontween with AS is no problem anymore, I get the basics. I can also make a fade in AS. But I am working on transisions which neet a shape tween.......and i have NO clue how that should work.

What I want is the reversed effect of water when you gently put it on a flat surface (you will see it spread in a very nice way, some parts go further then others).

I have this at the moment, but the "water" just flows away equally.
How can I do this?? any examples??

Shape Tween?
So I just started using Flash MX, I've had a lot of experience with Flash 4 and 5, but it's been a while since I've used it. MX seems great for the most part, but what happened to shape tweens?! Am I just missing them in there? All I can find are motion tweens and crazy effects. Transforms seem like an incredible over-complication of what used to be a really easy part of flash.

-grahamd

Shape Tween In MX
how do i do a shape tween in flash MX, i cant find the pop-up. im used to flash 5. please send any replies to thormylord@hotmail.com

Shape Tween Help
Can someone point me to a good shape tweening tutorial that they may have gone through>? Looking for personal recommendations, thanks a bunch for any assistance you can provide.

Q

Shape Tween
I'm having a problem with a shape tween. I basically want to make a box looks like it's glowing. I have attached the file.

Thanks,

Brian

Shape Tween.....or Is It?
http://www.claro-intelecto.com/

okay, now i know that you can change colours in a nice blending kind of way using shape tweening, however, on the named site above, how would the colour change have been done on this image though. It's as if the photoshop 'hue' function has been animated.

and just for the record, the album by claro intelecto - neurofibro -is well sweet!

thanks

tabrez...

Shape Tween
Flash MX

I am trying to do a rounded box that has shape tweens to bring it to it's final rounded box shape. The problem I am having is that when I create the shape in flash as I morph the shape it adds more toggle points. Any tip on how I can morph my shape with the exisitng toggle points without adding more?

I tried creating my shape in Illustrator and the copying the shape in but when i do that it never seems to shape tween the way I want.

Any help would really be appreciated.

Thank you!

Shape Tween Help
So, I am trying to do a shape tween from text to a drawing I did with the pencil tool -- and I have broken aprt the text, and basically the shape tween works. However, on the second frame, the text immediately dissapears and then fades in while shape tweening to my drawing -- how can I avoid this from happening and just have the tween occur with no dissapearing?

Thanks -- Dave

Shape Tween
I am making a stick figure game. But, I can't get the legs to move properly. I am telling shape tween to let them bend and move foward and back, but all it does is flip them. How can I do this? If you are not sure what I mean go to this. http://www.stickpage.com/anicedaytodieplay.html
That is a good example of what I want.

Shape Tween Help
my problem is kinda hard to explain by words, you just have to look at it-

im having trouble with the second half of a shape tween i'm trying to do..

can you look at my fla and hep plleeeaasse?
the problem is in the main movieclip (named "main")
thanks,
chris

Shape Tween
I'm trying to make a big square scale down to a small square smoothly. The square has a design on top and I can't seem to get that to scale correctly. This is probably really easy to fix, but I just can't seem to get it! Attached is the .fla.

Shape Tween
http://brendonsher.com

when i do the shape tween on the orange bar when you click on the bio, the shape tween spazes out. im not sure what is causing that. The .fla file is available upon request

Shape Tween?
I cannot figure out how to do a shape tween in flash mx 2004 with text. Ive looked at all the tutorials and i cannot find anything! Can anyone help, and just tell me how to make it so a group of text turns from white, to blue. Im getting pissed at my computer, damn...
Thanks...

Shape Tween Imported Images

Can someone help me, if it is possible, I would to tween the shape of one imported .jpg into another imported .jpgCan this be done? I am a newbie with MX6! Please help!Thank you

Can someone help me, if it is possible, I would to tween the shape of one imported .jpg into another imported .jpg

Can this be done? I am a newbie with MX6! Please help!

Thank you