Flash :: Fscommand Help Plzzz

Fscommand Help Plzzz
i have made a projector file with flash mx. and i want to open an external file, from a click of a button (exactly like the pne that PC Magazine cover discs come with, where you click to install a demo software). The problem is that i have tried the fscommand "exec" but flash wants me to store my extrenal file in a folder called fscommand. This is a problem to me becasue i have quite a few softwares with the setup.exe file and if i put all of them in one folder they will clash.
Could some one PLZZZZZZZ Help!!

View Replies ! View Related

Plzzz Help
Hi there,
tricky little problem,
i have 10 different hidden buttons on stage which carry different
tweens in them. when one takes mouse over them evey button changes and amination of
each buttons and then stops and is over the hit button now we can see the
button but now its not a button any more.
now i need your help from here on. In the left lower corner there is
a dynamic text box(its name is text) which will show that on how many hit buttons mouse have been rolled over.
what will be the code.....?
and when this dynamic text box shows 10 then movie will go to next frame and start playing.

i have tried my best to explain u what problem i am facing.
HELP.....
plzzzzz reply. ALL COMMENTS WILL BE APPRECIATED.

Bye
ADNAN

View Replies ! View Related

Help Plzzz ...
simple Q??
can i change frame rate using action scripting?
if yes ,,, how ... ??
if you give an example this would be really great ...
thanx in advance ..

View Replies ! View Related

[f8] Plzzz Help
okay im having a huge problem ... okay so .. i have this design template and im editing it .. im not that good at flash havent used it in years so ... okay when i copy this button it makes the same changes to each one when i edit either of them ... how do i fix this so i can edit one and it wont change the actions in other one or change anything in general to the other???

View Replies ! View Related

Help Me Out Plzzz
good day! its my first post here!

thank you for allowing me to join!

here's my question.
i'm trying to create a map based search street. what i did is i created several movies with the whole city map in my main movie
then i created a movie for each search st. what i want to do is to load the search st movie unto my main movie. i know how to do this but my problem is how will you call the search st specifically when a user search a certain st.

thanks in advanced!

flashroiem but my problem is how you call the search st specifically call the search st specifically

View Replies ! View Related

Plzzz Help Very Tricky
plzzzzz help cos the wall has a big dint in it from where im banging my head against it...

ok i got a start page which has a chromless window html code in it. when the enter button is pressed it loads the intro.html page in a chromeless (e.g. borderless) window.

this is fine but when the intro movie finishes i want the intro page to close and the main movie to open in a chromeless window again.

this is where the problem is how do i close the intro movie and load the main movie in a chromless new page?

the other problem is that i think the sorce code for the chromless window needs to be on the previous page e.g. for the intro it will be on the first index page. therefore for the main movie to open in a chromless window the source code would have to be in the intro page source.

if anyone could help me it would be really good as its a university project and needs to be handed in very soon

View Replies ! View Related

# # DropTarget # # Plzzz Help
i have a main movie and using the load movie command i load and unload various movies onto various levels, but when i load a movie with the droptarget function the problem starts.
the movie can be dragged but when u leave it on the hit area it does not recognise the hit area and comes back to its orginal position.
but when u play the movie independently it works fine..
i am attaching two files for reference
click.swf ie the main movie
ooo.swf ie the movie with the drop target feature.
Plzz help !!

View Replies ! View Related

Collision Script Help Plzzz?
onClipEvent (enterFrame) {
if (_root.b1.hitTest(_root.right)) {
setProperty ("_root.b1", _x, targetx);
setProperty ("_root.b1", _y, targety);
tellTarget ("/") {
nextframe()
// tell main time line go to ...next frame in
// this example
}
}
}

I use that script for when a movie collids with another it goes to another frame. It doesn't work if you put the goto action where nextframe() is. I don't want it to goto the next frame i want it to go to another frame. Plzzzz help!

View Replies ! View Related

Stopping My Navigator Plzzz Help
ok my navigator tracks and seeks my mouse as you can see at
http://www.silk-design.com/test

but he goes we out of the movie

how do you stop this by telling him by variables
like this x= -450 and x= 450

but I don't know how you set up this script

plz help

this is my script so far:

onClipEvent (enterFrame) {
_x = _x+_xmouse/20;
}

View Replies ! View Related

Plzzz ,,, Flash Button
hello ,, this is what am in to :
burn a cd that contains a .doc files and make autorun flash interface that contains a buttons and when click on one of those buttons it have to open a specific .doc file on my cd ,, i know how to open it without using a cd with a fscommand folder that contain those file : html.bat - html.doc - html.exe - invoke.exe ... but how can i use those file on my cd and make it effective with those button so any one can use this cd and open the files ??

View Replies ! View Related

Help Plzzz With Button Actionscript
i would like to control a movie via a button. my movie is made of over 100 frames (swish animation exported to flash) i want a button that will stop the movie at the frame that i desire. eg my button is on frames 10 - 20. in that time i want to be able to press the button to make the movie stop at a particular frame, say frame 35. how do i do that?

basically i want a button to stop the movie at a given frame. the movie has to play until it reaches that frame then stop. so if the button on frames 10 - 20 is pressed, it will play until it reaches frame 35 then stop.

View Replies ! View Related

Translate In Actionscript For Me Plzzz
Hello,

My problem is in the following code :

ActionScript Code:
this.gotoAndPlay("press");
this.enabled = true;
if(prevClip != this) {
prevClip.enabled = true;
prevClip.gotoAndPlay("go");
//prevClip("out");
_global.prevClip = this;
}
I use it in my main navigation so that a button stays highlighted when clicked untill another button in the head navigation is clicked.

I created another navigation, in the swf that is loaded when clicked in the main navigation. Now I also want to use the code above for this navigation, but unfortunately it doesn't only work for the new (sub)navigation but also for the main navigation. So if I click something in the subnavigation, the clicked item in the main navigation is no longer highlighted.

Does someone understand what I'm saying. Cos I don't think I'm talking much sense. I only want to know if somebody can translate for me in actionscript :

How do I say "delete prevClip" as long as it is not f.e. "mc_button_3"

Someone plz????

View Replies ! View Related

Login Issues - Plzzz Help =)
hey all,

im trying to think of how i should do this i want to have 1 login preferrably that will allow the client to access several secure pages and i want the admin to have access to all the secure pages?

i have aready made a login on another site with php and a database and that works fine but its just dealing with different permissions or levels...could anyone plzz pass me in the direction of any tutorials of this or if they know how to do it to plzz share with me

cheers peeps!

View Replies ! View Related

Needdd Helpppp Plzzz
hi guys,

im making a webcam flash game atm, its a ninja game, like the playstations eyetoy game, i have ninjas come from left and right, i am using script to place the ninjas from the library to the stage they are called Template2player,targetTemplate,targetTemplate3play er, 3 ninjas in total. now the problem is placing them in the right position eg(one comes from the top of the building, one on the ground, one on level 2 etc)

i placed the ninjas in an array (targetList and added the positions i wanted them to appear.

my code looks like this

if(!gameOver) {

targetCounter ++;
targetList = ["targetTemplate2player, _x: 38, _y: 80 " , "targetTemplate, _x: 60, _y: 140", "targetTemplate3player, _x: 210, _y:15"];
var randomNum = random(3);

var someTarget:String = targetList[randomNum];

var target:MovieClip = targets.attachMovie(someTarget, "Target" + targetCounter, this.getNextHighestDepth()+1000+targetCounter);
target.myNum = targetCounter;

num:target.myNum};
}
}

now can someone help me, the ninjas are not showing on the stage, is there something i missed in the code??? or do i have to place the positions of the ninjas elsewhere

plz help

cheers

View Replies ! View Related

Text Scroller With CSS - MAC And PC HELP PLZZZ
Hi All,
I am having the WORST time creating a text scroller with CSS. I just wanted a simple text scroller for my site for the news. I noticed that when I use the Font FFF Harmony it does not show up in MAC only on PC. And, none of my CSS works. I am still learning. PLEASE PLEASE HELP!! Can someone please help me or give me a tutorial??

Kristina

View Replies ! View Related

Im Not Sure How This Can Be Done, Its A Drag And Drop Thing Plzzz Help
What i need is for if an object is dragged and released on top of another object it goes to another frame, but if it isn't released on that object the object will go back to its original place! Like in the inventory or arcane episode 2 at:
http://www.sarbakan.com/Arcane1
Please help!

View Replies ! View Related

?Custom Cursor Problem? PLzzz HELP
I've built a custom cursor following a tutorial in a book.

Basically using :

onClipEvent (mouseMove){
_x = _root.xmouse;
_y = _root.ymouse;
updateAfterEvent();
}

Which works fine..but I became stuck as the tutorial continued to explain how to only activative the custom cursor when it's over a particular area (a 'Hot' mc) !! Which is what I want .... but I just can't get it to work ??? Does anybody have any Ideas ??

I've added an FLA of what I've got up to now !!

View Replies ! View Related

Problem With My Flash Site, Plzzz Help
---> http://www.4thdimension.homestead.com
I'm new at flash, this is my first attempt to create a flash web site. I used javascript to edit the html file that was published from the flashMX file i created in order to use popup windows to display large imgs from thumbnails in the flash movie. i got these codes from some website to put on my thumbnail as action "on (release) { getURL("javascript: popup();");}" then insert javascript "function popup() {window.open ('http://......" in my html file. It does load up the images properly, but everytime after i close the popup window tat was loaded, it will mess up all my buttons, watever buttons i click, it will take me back to the first button where the thumbnails were, and i cannot loadup the popup images again. check my website, click all the buttons and thumbnails u'll know wat i'm talking about. I tried and tried, but i couldnt figure out why, its getting on my nerves. Plzzz someone help me out here, i'd really really appreciate it, thanx a million in advance.
Jeffrey

View Replies ! View Related

Problem With My Flash Site, Plzzz Help
---> http://www.4thdimension.homestead.com
I'm new at flash, this is my first attempt to create a flash web site. I used javascript to edit the html file that was published from the flashMX file i created in order to use popup windows to display large imgs from thumbnails in the flash movie. i got these codes from some website to put on my thumbnail as action "on (release) { getURL("java script: popup();");}" then insert javascript "function popup() {window.open ('http://......" in my html file. It does load up the images properly, but everytime after i close the popup window tat was loaded, it will mess up all my buttons, watever buttons i click, it will take me back to the first button where the thumbnails were, and i cannot loadup the popup images again. check my website, click all the buttons and thumbnails u'll know wat i'm talking about. I tried and tried, but i couldnt figure out why, its getting on my nerves. Plzzz someone help me out here, i'd really really appreciate it, thanx a million in advance.
Jeffrey

View Replies ! View Related

Problem With My Flash Site, Plzzz Help
---> http://www.4thdimension.homestead.com
I used javascript to edit the html file that was published from the flashMX file i created in order to use popup windows to display large imgs from thumbnails in the flash movie. i got these codes from some website to put on my thumbnail as action "on (release) { getURL("java script: popup();");}" then insert javascript "function popup() {window.open ('http://......" in my html file. It does load up the images properly, but everytime after i close the popup window tat was loaded, it will mess up all my buttons, watever buttons i click, it will take me back to the first button where the thumbnails were, and i cannot loadup the popup images again. check my website, click all the buttons and thumbnails u'll know wat i'm talking about. I tried and tried, but i couldnt figure out why, its getting on my nerves. Plzzz someone help me out here, i'd really really appreciate it, thanx a million in advance.
Jeffrey

View Replies ! View Related

Plzzz Urgent>> Scroll Bar's _focusrect
hii all

using flash mx 2004. i am using scrollPane for calling swf files and at a certain point in that scrollPane i have to click a button whic opens a mc above that scrollPane. The Problem is that the only focus rectangle of scrollPane is still above the mc which i am calling. i tried but can't solve it. i have to submit that file please help

View Replies ! View Related

Dynamic Text In A Swf Loaded Into Another Swf - Help Plzzz
I made this swf movie where a dynamic text displays an external text file.
Since I don't have much knowledge in actionscript, i just typed

LoadVariablesNum("text.txt",0);

in the action layer and it worked out fine.

But when I create a preloader and load the main movie(the movie with the dynamic text) in it using the Loader component, the dynamic text dies.

please help me with this. I don't know how to use pathing.

View Replies ! View Related

Curly Line Drawing Problem.... Plzzz Help
Hi there Every1!

First: I am newbee so please try not to lame me cos I am allready, and please if you can help me try to explain it very detailed, step-by-step like trying to explain it to your grandma! Thanx…
So here is my prob. I would like to make a simple movie (I told you I was a newbee) which shows a pencil which draws a curlicued (not straight) line! I have the pencil on a layer moving but…. I just CANT make the line. I really dont know how can show the drawing… I would like to make the line appear as the edge of the pencil is moving. I hope you understood my problem and you can help me!
Thanx in advance!!

View Replies ! View Related

Palestine Game Help... Variables Problem Urgent, Plzzz Help.
hya guys, cheers for the help first of all,

im making this game which is parody on palestine situation. in brief, i need to workout the action script for the + and - buttons so that when they are pressed on different thermometers, it changes the value of the other ones...
dont know if that makes sense, but see what i've done, it's a bit of a mess.

the - buttons work for all thermometers but not perfectly, the plus buttons dont seem to work right at all. please, i have a deadline, and if u can help me fix this you're a legeeeeend!!!!

thank you.

shroomly.

View Replies ! View Related

Help On Making Countdown Timer Work For My Middle East Game? Plzzz
hya all, cheers for helping.

im making a middle eastern game, i have a start page and on that page ill have a button which sends the user to the game page (scene 2) how exactly do i integrate a countdown timer that i downloaded off this site to run so when the game starts it displays 2:00 minutes and counts donw. do i write this stuff in my action script??
not sure what to do, im not too great with flash and would appreciate any help!!!

thank you very much.

View Replies ! View Related

How Do You Get Pdf Fscommand Script Into Fscommand
I'm trying to link to a pdf file. I have viewed others messages about creating a .dat file, but it mentions about making sure this is in the fscommand folder. Please can someone detail how this complete process should be done?

If this wont work on a Mac, then that leaves me with the GetUrl command only. As I want this to be a CD Rom not web page I need to link to the html pages offline (if this is my only option) and I have a projector file, where should these htm files be?

Thank you.

View Replies ! View Related

I Know, I Can Send Fscommand But Can I Take In Fscommand
I know, I can send fscommand but can i take in fscommand and process it?
Is that possible?

View Replies ! View Related

Fscommand
Ok, Im trying to have flash open a program on my HDD. i have tried several atemps but still can't get it to open.
I know that it has to be a .exe file to work. I have got it to save a text file in flash that way.
I guess i just need the command for it, like is it open, Run, Go what ever. If you can add an example that would help me to understand that would be great.
Thanks you,
andrue.
Here is what Im trying now.

on (release) {
fscommand ("open", "c:/windows/notepad.exe");
}

View Replies ! View Related

FSCommand With IE4
Dear community!

I am syncronizing 2 flash4 animations by using FSCommands.
With my browser (IE5.5) it works fine. My customer is using IE4 - the scripts do not work correctly.
Please check if possible: http://www.kaheba.com

Do you have any info concerning problems with IE4?

Thank you,
Gerfried Ranner

View Replies ! View Related

Help In FSCommand
Is there a way to accept or pass variables to a flash file when it is opened in a browser.
e.g. I need to change the state of my flash file depending on user input.

View Replies ! View Related

FSCommand
I've heard rumors about how the FSCommand would allow a user to do some serious damage from notepad -- Is this true? Any corrections?
[Edited by cmw on 08-30-2001 at 12:41 PM]

View Replies ! View Related

FSCommand HELP
I've had success using the FSCommand to launch .EXE's on my hard drive....until now.

Apparently, Flash doesn't like Folders with spaces in the names. Here is my example:

on (release) {
fscommand ("exec", "C:/Progra~1/Golden~1/Cdrwin~1/Cdrwin.exe");
}

As you can see, I've tried using short names. I've also tried using long ones. Flash won't budge.

Can someone please tell me what I'm doing wrong?

View Replies ! View Related

FSCommand
Does this command get inserted on the first frame of your movie, also what does it mean? As I want the full screen effect to happen on load up! Thanks for any help

View Replies ! View Related

Fscommand
I don't understand fscommand, can I use it to make my flash site full screen in a web browser or not? That's what I hope to accomplish, if someone could help me out I would be much appreciated.

View Replies ! View Related

Fscommand Help
I'm creating a flash exe file which is a product demo to be placed on a CD and handed out.

In this flash exe file I have a button to run another flash exe file displaying a case study in a separate window so the user can select from other buttons if they want to.

I've used the FSCOMMAND to do this, but I haven't figured out how the FSCOMMAND can find the file since the users CD-ROM may not always be the standard D:/ drive location.

Is there a way to set up the FSCOMMAND to find the exe file on the CD if the users drive letter varies?

Any help on this would be greatly appreciated!

Thanks.

View Replies ! View Related

Fscommand ?
I set up FScommand to trigger a script on the web page. How do I pass a flash variable to this script. Also, the FScommand is failing in Netscape. The swLiveConnect=true and name tag are both set. Still fails, any ideas?
The code is below.

<A HREF=FSCommand:Go></A> <A HREF=FSCommand:Close></A> <A HREF=FSCommand:Backward></A> <A HREF=FSCommand:Forward></A> <A HREF=FSCommand:Stop></A> <A HREF=FSCommand:Webs></A> <A HREF=FSCommand:Focus></A> 
<OBJECT classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
ID=interface WIDTH=532 HEIGHT=20>
<param name="_cx" value="14076">
<param name="_cy" value="529">
<param name="Movie" value="interface.swf">
<param name="Src" value="interface.swf">
<param name="WMode" value="Window">
<param name="Play" value="0">
<param name="Loop" value="-1">
<param name="Quality" value="High">
<param name="SAlign" value>
<param name="Menu" value="-1">
<param name="Base" value>
<param name="Scale" value="ShowAll">
<param name="DeviceFont" value="0">
<param name="EmbedMovie" value="0">
<param name="BGColor" value="FFFFFF">
<param name="SWRemote" value>
<param name="Stacking" value="below"><embed src="interface.swf" quality="high" bgcolor="#FFFFFF" WIDTH="532" HEIGHT="20" swLiveConnect="true" NAME="interface" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash">
</OBJECT>

View Replies ! View Related

Fscommand Help Plz..
Ive got 2 questions..

1. I'm using fscommand to trigger a script on the web page. How do I pass a Actionscript variable to this script?

2. The fscommand is failing in NS. The swLiveConnect=true, no table is being used and emb name tag is being used.

You can view test page at http://dapop.com/test.htm

When viewing the page source in netscape, you'll see a problem occurs in the Fscommand script at the line

document.write('</SCRIPT>
');

On and after this line, netscape misreads the code.

View Replies ! View Related

Fscommand
Dear Allofyoos,

I am making an interface to open up videos on a cd.
I use the fscommand in a stand alone player to open the Windows Media Player but it will not open the application.
I used "Open URL" which works fine on Windows98 but any system above that opens IE and plays the video really small in the bottom left corner AAAARRRGGG!
I think my fscommand to open media player is wrong:
C:/program_files/windows_media%player/mplayer2.exe
HELP!!!
Thanks again.

Andy

View Replies ! View Related

Fscommand(
Hey,I'm having a little problem, I have my new site all set and ready for it's big launch.

I have one fustrating problem!!

I cannot figure the window problem

If you go here > http://www.noinc.net/ You see the window expands from a few pixels big to 1/8 of the screen.

How can this be done, I refuse to launch my site without this effect! I have written DHTML.js file and I've used basic javascript to set the window size, I just can't figure how to make it interact with FLASH, It's really getting fustrating as I'm so close!

As he shouts * I WILL OVER COME THIS CHALLANGE, ARRGHH* lol

If anyone could help me where situated, it would be highly appreciated.

Thank you

View Replies ! View Related

FSCommand Pan
Hi!
I have a flic that has a scaleable height depend on
XML input date, but the absolute size of the objects inside the flic must stay constantly. So, I scale the
<object> by getURL("javascript:WinResize(X)");
(WinResize it's my function in Javascript in HTML)
But now I have to move my flic to the top.
I know that there is such a FSCommand "Pan", but how to
use it? And is it exist really? May be there is anouther
solution for this problem.
Thanks

View Replies ! View Related

FSCommand
Does anyone know if there's more than the 6 arguments for the Stand-alone player command in FSCommand???

In case, does anyone have a list???

View Replies ! View Related

Fscommand
Hi , my question :

I want to use html script ( or other script can help )
to tell the flash movie to gotoandplay frame 2 .How to do it ?

In the flash movie , I use this script

fscommand ("play")

And the html I put the flash movie

function play ()
???????
[

What I have to write for the function ?

Please help , thank .

View Replies ! View Related

Fscommand ?
Hi,
I can use the fscommand in Flash 5 fine. Works great on the main timeline, but how can I use this command in a button inside a MC? I use a clean function to pull the variables from the MC to _root, it reads the variable names
in the text file, but does not read the actual variables(input text),they remain blank.
Any ideas???

Thx in advance
~GD~

View Replies ! View Related

Please Help With Fscommand
Hello all:
Has anyone been able to get the fscommand to work in an MX projector? I tried with no success. here is how I have it set up, A button with this AS:

Code:
on (release) {
fscommand ("exec", "car.txt");
}
in this instance I have a folder named fscommand in the same folder as the projector. In the fscommand folder I have the car.txt file. This doesn't work.

I even have tried using the flash tools ftoolapp.exe. Here is how I set that up, A button in flash with this AS:

Code:
on (release) {
fscommand ("exec", "ftoolapp.exe" add Chr(9) add "car.txt");
}
in the same folder the projector is in I have a folder named fscommand. In that folder I have the ftoolapp.exe and the car.txt file. this seems like it should work, but no dice.

This is killing me. I need to be able to open several kinds of files this way. The wierd thing is If I use the first method, I can open a Flash exe all day but when I change to a doc or a txt file it doesn't work. Nothing like a tech problem in the face of a deadline! Any help would be appreciated.
[Edited by felix_man on 05-07-2002 at 08:47 AM]

View Replies ! View Related

FsCommand
I made a flash movie. I want the movie to execute a .exe program by fsCommand "exec". But when I open the swf with flash player 6 the program did not run. Could you please tell me how to do so? Does flash player have bug?

View Replies ! View Related

FScommand
Hi there

I am trying to do a simple FS command in flash 5 where allowscale & resize = false. Can't get this o work. What is the correct way to do this?

Cheers,
A.

View Replies ! View Related

FsCommand HELP
I am using the fscommand for fullscreen, which is working in two seperate movie files. HOWEVER, when I load one movie into the other, the second movie (which replaces the original one) shows up at its original size and not as a fullscreen...even though the fullscreen command is in the first frame of that movie. Any advice? Thanks in advance

View Replies ! View Related

Fscommand
I have created my application using flashmx. I have used the fscommand exec.

on (release) {
fscommand ("exec", "datafort.bat");
}

I have created a folder called fscommand & placed my datafort.bat file inside.(The .bat file works correctly.)

I have gone through numerous links & other posts on this problem & I am sure that I have done everything correctly. But unfortunitly it is not loading. I have also tried using other applications & the same problem is occuring. I am using win2k with flashmx trial version. Could it be a bug in the system, as this has me going mad. Would it be possible to download a working file to test on this system.

View Replies ! View Related