Transition Load Bar
hey!
srry, i read everything on kirupa forum that there is to read about transition and a load bar.. but i cant seem to find how it works...
i used the transition tut on this site and then i would like a percentage loadbar in stead of the loading txt...
i know, the question has been asked before..., there used to be a .fla file in the answer to that question, but its gone...
(unless im starting to get blind...)
so i ask you plz! could somebody tell me how a percentage load bar to load a entire movie is different from the percentage load bar used in a transition effect?
thx verrymuch!
xx
KirupaForum > Flash > Flash 8 (and earlier) > Flash MX 2004
Posted on: 02-26-2004, 10:53 AM
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Load Mc Will Not Transition
Can some one tell the rules for using transtions on buttons and MC's?
i'm using the code below to load an image into an empty MC, but i want the image i'm using to act like a button on rollover and press. I want to use the transtions effects aswell, but when i select the mc01 to act as a button nothing happens! Do i need to use an invisible button to get this to work!
//load
mc01._alpha = 20;
mc01.loadMovie("images/GS_imagetest01.jpg");
//effect on pressNOT WORKING
mc01.onPress = function ()
{
extendTween = new TweenExtended(mc01,["_alpha"],
easingType2,[mc01._alpha],[100],1,true);
};
cheers
Rat
Load An MC Behind An MC With Transition
I am working on buidling a flash site that looks like a bulletin/cork board. On the right hand side of the board there are a stack of papers pinned to the board. On the left hand side I have a piece of paper with the menu. I have it set up now that when you click on a menu item there is an MC on top of the stack of papers that goes to a certain frame to display a portfolio piece.
What I would like to do is that everytime a button is selected make it look like a piece of paper is falling off the board. I'm having trouble trying to figure out how to set it up so that the previous portfolio piece falls down revealing the new piece everytime. You can go here to check out what I have in progress: http://www.crdezign.com/blackdog/site.swf
Any help is appreciated. Thanks!
Transition Load Bar
hey!
srry, i read everything on kirupa forum that there is to read about transition and a load bar.. but i cant seem to find how it works...
i used the transition tut on this site and then i would like a percentage loadbar in stead of the loading txt...
i know, the question has been asked before..., there used to be a .fla file in the answer to that question, but its gone...
(unless im starting to get blind...)
so i ask you plz! could somebody tell me how a percentage load bar to load a entire movie is different from the percentage load bar used in a transition effect?
thx verrymuch!
xx
Load Movie Transition?
I am trying to get a smooth transition when loading a movie containing a new content page. I want horizontal swipe to erase the content of the previous page (or movie) and then swipe back to bring in the new content (or movie). If I load a movie with the swipe effect how can the main .fla tell when this has finished to load the next page movie. It has to work with whatever the content on the page is at the time - hopefully this has an actionscript solution.
Load A Swf File Into A MC With Transition
hi all, i'm a beginner to actionscript, i have been trying to write a script that able to load a swf file into a MC with transition when press a button. I have learn how to load a swf into a MC(1), and learn how to load a image with transition(2), but i just don't know how to combine those two together. Please help.
1. on release button load <name"picnum".swf> from images folder
on (release) {
loadMovie("images/name" + picnum + ".swf", "contentscreen");
}
2.1 load images with transition
onClipEvent (load) {
picnum = "one";
display = "01";
}
onClipEvent (enterFrame) {
picalpha = Math.Round(getProperty(picnum, _alpha));
oldpicalpha = Math.Round(getProperty(oldpicnum, _alpha));
if (picalpha <100) {
setProperty(picnum, _alpha, picalpha + 5);
}
if (oldpicalpha >0) {
setProperty(oldpicnum, _alpha, oldpicalpha - 5);
}
}
2.2 on release button, load images with transition
on (release) {
display = "01";
if (picnum eq "one") {
} else {
oldpicnum = picnum;
picnum = "one";
}
}
Am I trying the wrong method.....
Thanks
Alex.
Load Swf Transition Question
i read the tutorial on loading a movie with transitions but i would like to achieve a different effect. Instead of having a mask cover the content loading in, i want to have a closing sequence for each section that is being unloaded. (ie have the movie "undraw" itself) With the masked transition the code would look like this for the home button:
Home.onRelease = function() {
if (_root.section != "Home.swf") {
_root.section = "Home.swf";
_root.transition.gotoAndPlay("closing");
}
but instead i would want the last line of code to reference the end animation of whichever movie is being unloaded, then load in the movie of the button that is pressed. any ideas?
Load Swf Transition Question
i read the tutorial on loading a movie with transitions but i would like to achieve a different effect. Instead of having a mask cover the content loading in, i want to have a closing sequence for each section that is being unloaded. (ie have the movie "undraw" itself) With the masked transition the code would look like this for the home button:
Home.onRelease = function() {
if (_root.section != "Home.swf") {
_root.section = "Home.swf";
_root.transition.gotoAndPlay("closing");
}
but instead i would want the last line of code to reference the end animation of whichever movie is being unloaded, then load in the movie of the button that is pressed. any ideas?
FMX Load Movie Transition Code
How do I load a movie, on button release, behind the current loaded movie that the viewer is looking at and have the current movie wait until the one loading behind is fully loaded before a transition effect occurs to reveal the behind movie. I have 6 buttons that load movies. This is easier viewed than trying to understand what I just typed: www.mn8studio.com
click on a button to view a new page and check out the transition (I am not concerned with the actual moving graphic of the transition but the code that loads the new movie behind the current one)
Thank you for any help
Transition Tutorial: Is It Possible To Load A Swf Into A Loaded Swf?
I am working with the transitions tutorial: http://www.kirupa.com/developer/mx2004/transitions.htm
Here is a link to the modified example im working on.
http://www.pixelvector.com/temp/tut/
If you are familiar with this tutorial you will see this is familiar. Main movie checks to see if the specific section is at "midframe" if its not it waits and does nothing, then once you have transitioned to midframe and stopped it, click on the next section will then transition out and load the next movie. I am tring to do a little variation of it.
ok we have mainmovie2004.swf which has 4 buttons. Each button, section1, section2, section3, and section4 all load specific movies to "container" on the main timeline. Section1 button loads section1.swf, Section2 button loads section2.swf...etc. Well I have placed another set of buttons in each section (just section1 and 2 for example sake). Each button loads a specific movie into container_small (yeah I know it doesnt follow camelCode but thats the least of my concerns). I have been messing around with the code and I am able to get Section1 to load, then when I click on the first pink button in section1 it loads section1.1 which is (section1_1.swf). When I click on the next button it just reloads the same section no matter what. The other sections work because when you load section1 and click on any pink button the corresponding swf loads just doesnt ever transition out. The tree would like like this: {mainmovie2004.swf[section1.swf(section1_1.swf)]}.
I think the problem is the last frame of each sub section has an action that will load the next section. I need to get the path correct.
_root.container_small.loadMovie(_root.currMovie+". swf")
Now when I am click inside section1.swf its tring to load the next subsection into the container in section1.swf which is container_small, which is neither in the "_root." or "this.".
What would be the proper pathing?
Forgive me for my ignorance, I'm still learnin me some actionscripting
Thanks
Paul
Transition Effect Fails In Xml Load
Code:
var thumb_spacing = 40;
// load variables object to handle loading of text
var description_lv = new LoadVars();
description_lv.onData = function(raw_text){
description_txt.text = raw_text;
}
function GeneratePortfolio(portfolio_xml){
var portfolioPictures = portfolio_xml.firstChild.childNodes;
for (var i = 0; i < portfolioPictures.length; i++){
var currentPicture = portfolioPictures[i];
var currentThumb_mc = menu_mc.createEmptyMovieClip("thumbnail_mc"+i,i);
currentThumb_mc._x = i * thumb_spacing;
currentThumb_mc.createEmptyMovieClip("thumb_contai ner",0);
currentThumb_mc.thumb_container.loadMovie(currentP icture.attributes.thumb);
currentThumb_mc.title = currentPicture.attributes.title;
currentThumb_mc.image = currentPicture.attributes.image;
currentThumb_mc.description = currentPicture.attributes.description;
currentThumb_mc.onRollOver = currentThumb_mc.onDragOver = function(){
info_txt.text = this.title;
}
currentThumb_mc.onRollOut = currentThumb_mc.onDragOut = function(){
info_txt.text = "";
}
currentThumb_mc.onRelease = function(){
image_mc.loadMovie(this.image);
description_lv.load(this.description);
}
}
}
function loadTheImage (e):void {
TransitionManager.start(image_mc, {type:Wipe, direction:Transition.IN, duration:3, easing:None.easeNone, startPoint:1});
}
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE,loadTheImage);
// xml object for xml content (defines sources for selections)
var portfolio_xml = new XML();
portfolio_xml.ignoreWhite = true;
portfolio_xml.onLoad = function(success){
if (success) GeneratePortfolio(this);
else trace("Error loading XML file"); // no success? trace error (wont be seen on web)
}
// load
portfolio_xml.load("portfolio.xml");
FMX Load Movie Transition Code
How do I load a movie, on button release, behind the current loaded movie that the viewer is looking at and have the current movie wait until the one loading behind is fully loaded before a transition effect occurs to reveal the behind movie. I have 6 buttons that load movies. This is easier viewed than trying to understand what I just typed: www.mn8studio.com
click on a button to view a new page and check out the transition (I am not concerned with the actual moving graphic of the transition but the code that loads the new movie behind the current one)
Thank you for any help
How To Load External Image With Transition Effect?
Hi,
How can I do some transition effect while loading the external image.
The following code is not working. The "picture.png" only waits 3 seconds and appear without any transition effect.
Quote:
import fl.transitions.*;
import fl.transitions.easing.*;
var loader:Loader = new Loader()
image_mc.addChild(loader)
loader.load(new URLRequest("picture.png"))
// apply wipe transition
TransitionManager.start(image_mc, {type:Wipe, direction:Transition.IN, duration:3, easing:None.easeNone, startPoint:1});
Best regards
Alex
Cool Bitmap Transition- Make It Load Xml Images
I found this really cool transition on senocular.com, How can I make it dynamic and load images from an xml file?
Stage.scaleMode = 'noScale';
var speed = 20;
var rate = 5;
var focallength = 250;
var maxheight = 100;
var origin = new flash.geom.Point(150, 300);
var images = ["hil", "mtn", "ice"];
var blurfilter = new flash.filters.BlurFilter(0,0,1);
var shadowfilter = new flash.filters.DropShadowFilter(0,45,0x0, .20, 0,0, 1, 1, false,false,false);
var raisedepth = 0;
var imagesindex = 0;
var basepoint = new flash.geom.Point(0,0);
var transbmp = new flash.display.BitmapData(300,300);
var transclips;
click_mc.swapDepths(2);
loadTransBitmap( images[imagesindex] );
var clips = createGrid(this, 1, transbmp, 10, 10);
function onMouseDown(){
loadTransBitmap( getNextImage() );
startTransition(clips, transbmp, speed, delay);
}
function getNextImage(){
imagesindex++;
imagesindex %= images.length;
return images[imagesindex];
}
function loadTransBitmap(id){
var tempbmp = flash.display.BitmapData.loadBitmap(id);
transbmp.copyPixels(tempbmp, tempbmp.rectangle, basepoint);
tempbmp.dispose();
}
function createGrid(target, targdepth, sourcebmp, cols, rows){
target.createEmptyMovieClip("transition_mc", targdepth);
target.transition_mc.createEmptyMovieClip("reveal_ mc", 0);
var grid = target.transition_mc.createEmptyMovieClip("grid_mc ", 1);
var col, row;
var refRect = new flash.geom.Rectangle(0,0,0,0);
var clips = new Array();
clips.reveal = target.transition_mc.reveal_mc;
clips.reveal.bitmap = sourcebmp.clone();
clips.reveal.attachBitmap(clips.reveal.bitmap, 1);
var mc;
var depth = 0;
for (col = 0; col < cols; col++){
refRect.top = 0;
refRect.left = refRect.right;
for (row = 0; row < rows; row++){
refRect.right = Math.round(sourcebmp.width * (col+1)/cols);
refRect.bottom = Math.round(sourcebmp.height * (row+1)/rows);
mc = grid.createEmptyMovieClip("grid"+row+"_"+col, depth);
mc.depth = depth;
mc.rect = refRect.clone();
mc._x = mc.rect.left;
mc._y = mc.rect.top;
mc.x = mc.rect.left;
mc.y = mc.rect.top;
mc.elevation = 0;
mc.bitmap = new flash.display.BitmapData(mc.rect.width, mc.rect.height, true, 0);
mc.bitmap.copyPixels(sourcebmp, mc.rect, basepoint);
mc.attachBitmap(mc.bitmap, 1);
clips.push(mc);
depth++;
refRect.top = refRect.bottom;
}
}
return clips;
}
function startTransition(clips, transbmp, speed, delay){
transclips = clips.slice();
raisedepth = 2*transclips.length;
clips.reveal.bitmap.draw(transbmp);
onEnterFrame = transOnEnterFrame;
}
function transOnEnterFrame(){
var i = rate;
var rand, clip;
while(i--) {
rand = Math.floor(Math.random()*transclips.length);
clip = transclips.splice(rand,1)[0];
clip.onEnterFrame = transClipOnEnterFrame;
clip.swapDepths(raisedepth);
raisedepth--;
if (!transclips.length){
break;
delete this.onEnterFrame;
}
}
}
function transClipOnEnterFrame(){
this.elevation += speed;
if (this.elevation > maxheight){
resetClip(this);
delete this.onEnterFrame;
}else{
renderClip(this);
}
}
function resetClip(mc){
mc.elevation = 0;
mc.x = mc.rect.left;
mc.y = mc.rect.top;
mc.bitmap.copyPixels(clips.reveal.bitmap, mc.rect, basepoint);
mc.swapDepths(mc.depth);
renderClip(mc);
}
function renderClip(mc){
var scaleratio = focallength/(focallength - mc.elevation);
mc._x = origin.x + (mc.x - origin.x)*scaleratio;
mc._y = origin.y + (mc.y - origin.y)*scaleratio;
mc._xscale = 100*scaleratio;
mc._yscale = 100*scaleratio;
blurfilter.blurX = blurfilter.blurY = Math.floor(mc.elevation/10);
shadowfilter.distance = mc.elevation;
mc.filters = [shadowfilter, blurfilter];
}
Unload Movie With Transition, Then Load New Movie
Hi
I've searched this boards for a "while" but I haven't found a solution to my dilemma, so...
What I'm trying to accomplish (nothing new, I've seen it in a million web sites) is a transition to unload my external .swf files.
Basically, I have a root movie, with a number of buttoms that load every section inside a container.
Currently, when I load a new section, the external .swf in use is replaced by the "called" .swf, but this seems too abrupt to me.
So, how can I unload an external movie with a nice effect or a fading and load a new movie after that? Where should I insert this transition? What should be the actionscript to put in the buttoms?
Hope some can help me.
Thanks.
Unload Movie With Transition, Then Load New Movie.
I've searched this boards for a "while" but I haven't found a solution to my dilemma, so...
What I'm trying to accomplish (nothing new, I've seen it in a million web sites) is a transition to unload my external .swf files.
Basically, I have a root movie, with a number of buttoms that load every section inside a container.
Currently, when I load a new section, the external .swf in use is replaced by the "called" .swf, but this seems too abrupt to me.
So, how can I unload an external movie with a nice effect or a fading and load a new movie after that? Where should I insert this transition? What should be the actionscript to put in the buttoms?
Hope some can help me.
Thanks.
Unload Movie With Transition, Then Load New Movie.
I've searched this boards for a "while" but I haven't found a solution to my dilemma, so...
What I'm trying to accomplish (nothing new, I've seen it in a million web sites) is a transition to unload my external .swf files.
Basically, I have a root movie, with a number of buttoms that load every section inside a container.
Currently, when I load a new section, the external .swf in use is replaced by the "called" .swf, but this seems too abrupt to me.
So, how can I unload an external movie with a nice effect or a fading and load a new movie after that? Where should I insert this transition? What should be the actionscript to put in the buttoms?
Hope some can help me.
Thanks.
Transition Causing Colors To Be Off In Transition
I'm trying to recreate a transition/fade of an image from a flash file that I only have the swf to. It looks great on my box, but once live a viewed through Firefox, the colors get almost pschycodelic during the transition. I am using a tween between 0% alpha setting to 100% alpha, and selecting the blend to 'Hard Light'.
Has anyone else seen this and know of a work around?
Thanks.
jean
In/out Transition From Voetsjoeba : Problem With The Out Transition
hello,
I have some problem with a in and out transition Voetsjoeba explain here
My problem is that my 'out' transition is in a movieclip in the clip loaded so i tried to target it like this
ActionScript Code:
on (release) { if (this.currMovie == undefined) { this.currMovie = "print"; container.loadMovie("print.swf"); } else if (this.currMovie != "print") { if (container._currentframe == container.midframe) { this.currMovie = "print"; container.content.play(14); trace("???"); } }}
It is the code i have for my buttons that load the page, the trace command is read succesfully but it won't play my animation out.
On my loaded movie i have
ActionScript Code:
midframe=content("out")
on frame 1 because my transition is in the movieclip content.
The button that load the file is 'print' and 'web' in the soumen movieclip. I've posted my file here :
FILES
If someone can help me, it would be a great help !!
Thanks
Ubik
In/out Transition From Voetsjoeba : Problem With The Out Transition
hello,
I have some problem with a in and out transition Voetsjoeba explain here
My problem is that my 'out' transition is in a movieclip in the clip loaded so i tried to target it like this
ActionScript Code:
on (release) { if (this.currMovie == undefined) { this.currMovie = "print"; container.loadMovie("print.swf"); } else if (this.currMovie != "print") { if (container._currentframe == container.midframe) { this.currMovie = "print"; container.content.play(14); trace("???"); } }}
It is the code i have for my buttons that load the page, the trace command is read succesfully but it won't play my animation out.
On my loaded movie i have
ActionScript Code:
midframe=content("out")
on frame 1 because my transition is in the movieclip content.
The button that load the file is 'print' and 'web' in the soumen movieclip. I've posted my file here :
FILES
If someone can help me, it would be a great help !!
Thanks
Ubik
AS2.0 Fade Transition - Value Before Transition
I've been all over the forums this evening trying to find my answer before posting but I haven't quite found the answer.
I have a navigation section that has a series of buttons and when those buttons are rolled over I want to initiate a few actions. One action being a fade in of a movieclip that contains a graphic element.
Using the mx.transitions.fade class I have been able to sucessfully fade the mc in when I rollover the specified button. My problem is that I don't want the mc to be visible until it is faded in, and since the fade doesn't happen until I rollover a button I'm not sure how to setup the mc to be "invisible". Also when fading in I'm not sure what value that is affecting. I don't want to have it re-fade in if I rollover a neighboring button while it is still visible. I know I need to have some kind of check in place I'm just not sure what it is.
Maybe it's just my train of thought, but I've tried to think this through and I'm having some troubles. Can anyone offer any suggestions please?
Transition
oi~
as a start i made 2 "pages" in Swish, 1 is a very small intro.. the 2nd one is what should become a main-menu :}
what i cannot figure out is how to 'smoothly' transform from the intro to the menu, anyone that can tell me the secret ? :}
thanks a bunch.
Transition .....
hello.
could someone pls help me do this small piece of actionscripting.
how can you go from one Label to another Label and show the transition instead of the jump. I mean show the page scrolling thru the labels and reaching the label the bttn points too.
thank you
TRANSITION
Is there anyway to have an imported jpg fade in or out???
Help With Transition
Hi,
I have a movie which has a fwd and back buttons which toggles btw pictures. There is a transition between each picture. Is there anyway to view this transition when back button is clicked (like rewinding a movie)?
Cheers
Transition Help
hi guys, this is just my second time posting so be kind and give a newbie a helpful response. i have been working on a couple projects, and i am wondering how to make smooth transitions between different pages of my site. first i would like to know most sites (that have a lot of info) make such smooth transitions between each different page. for example http://www.flashlevel.com. first of all, when you click one of the side buttons, is the action on that button to go to a frame that plays a transition out of the current page, then opens into the next page? and then each different button has their own leaving and going into animations? but wouldnt this make file size huge? or is there one standard way of transitioning out of a page? also how is it able to load the next page as it is coming?? i have so many questions, if someone would please help me out, or if my questions were too disorganized to get back a coherent response then please just let me know. i would appreciate any help given on how to make smooth transitions between differnt pages on a web site. thank you very much for your help,
-ange52
Transition Within A Transition?
Hi, I'm currently working on a new flash layout. I don't have much done, but you can view what I've done so far at http://www.evanbartlett.com/test/ , just click the click here text and it should open in a window.
Ok. You'll notice that when you click any of the links that the buttons move around the movie. In between the buttons I would like to load an external .swf to whatever button is currently selected from the user. But what I would like to do is like a page transition.
When I user clicks a link I would like to have it like it is now and have it slide everything into place, then once everything is in place I would like it to load the selected .swf into the empty white space with some kind of smooth transition then pause. Then when and if the user clicks a different link I would like to have it set up so the currently open .swf closes with a smooth transition. Then when it's completely gone have the movie then finally slide to the selected button and do it all over again. Make any sense.
I've done standard page transitions with variables where you just have current .swf set to stop in the middle then play and close the clip and move on etc. But I have no clue at all on how to do it using the nav system I have chosen. I would appreciate any help at all! Thanks in advance.
Here's an example of what I would like to view although his is vertical and his code might be set up a little different. http://www.24-7media.de/ With mine when you click a button it changes the x position of every button to adjust to the chosen link, etc. If you understand what I mean and needed to know.
Transition Help
can anyone please tell me how I can create the transition effect where the plane from one section morphs into the plane of the next section if I am using Load movie to load my sections.
her's an example of the transitions I'm talking about:
http://www.junkflea.com/
seb
Transition
can anyone please tell me how I can create the transition effect where the lines adapt to the size of the content of the photographs.
here's an example of the transitions I'm talking about:
http://www.kirkimages.com
seb
Mc Transition...
Hi, I'm trying to create a movie where I have 4 buttons and each controls a mc. Rather than have each mc simply replace the other (which I can do without a problem), I'm trying to create a smooth, animated transition between each movie but the problem is I don't know where to start or what techniques to use for this. Are there any tutorials I could use or an example from someone else's work to learn how? Thanks for the help.
Transition Help
hello. im wanting to make transitions between my content.
i have all of my content for the site in the same scene but in differnt layers. eg. home, links, contacts. blah blah.
and i want to have a transition animation between 2 parts of content. eg i want a transision from home to contcts.
but the think im having troubnle with is like an outro b4 the intro to the next part.
if u get what im saying. i can make a transition from home to contacts but then if i go from links to contacts i get that same trnsition with part of the home outro on it,
so how would i go about making an outro then jump to wherever i want to go.
Transition
Hello all!
Ive searched and searched but alas I have only riddled myself sick and the only cure is to reach out and ask....
My main time line has Five frame labels which distinguishes each section of my website (they are seperated by a keyframe 10 frames apart) The main time line reaches Frame 10 Label "HOME" and i have a rectangle animate out which is a movie clip instance "mcRed".
Below the Content window are buttons to each section on the main timeline. Im trying to figure out how make a button reverse frames in the mcRed and when the reversing is done go to Frame "Dennis" on the main timeline that has another mcInstance with content. Here is the action script attempt ive made
on(Press){
_root.mcRed.back = true;
}
on(Release){
gotoAndPlay("Dennis");
}
they both play right but the "Dennis" is coming too quick and doesnt allow the user to see the mcRed reverse.
how should i script this?
Www.0-1.com Transition
hi...i am simply interested to know how the transition was done in this website:
http://www.0-to-1.com/
thanx
How Do You Do A Transition Like This...
http://adamsonadvertising.com/
I'm curious to see the code or be pointed to a tutorial/or movie here that would show how transitions between menu items, like the above link, are done.
Can you help with this.
Transition...
Hi there.
I am not new to flash but i keep coming across the word transition.
What exactly is one and can someone give me an example?
Thanks.
In & Out Transition Between SWF's
OK I am having and issue with this. I have figured out how to get a swf based on a button press and store that swf as a variable....
Code:
function current (currentSwf:String){
var loaded:String = currentSwf + ".swf";
loadMovie (loaded,container);
}
current ("home");
but what I am having an issue figuring out... is the code that stops another swf from loading before the current swf has done the transition out effect.... anyone got any tips or any code that I may not be thinking about... thanks
Transition In, Then Out...
http://www.josimar.com/eq_fk.htm
if you click on the 'waterside living' button you can see what I want to achieve regarding transitioning in, then, on click, out again...
if you click on 'heart of the city' you'll see the typical and easy 'no transition out' approach... which I don't want.
Can anyone advise on a good way of achieving the nice transition in, then out again? I have done it simply as tweens just now (not actionscripted) and realise it would take a lot of work to apply this to 8 buttons with multiple permatations of in/out transitions depending on where you click from and to.
Basically, what I think I want to do is use a button to tell a movie clip to play backwards and then go to a labelled frame at _root level... sounds simple?!
It's just a rough for a presentation tomorrow, and I can make it linear and just mock up the transitions in and out but I'd really like to know how to do this.
cheers
josimar
Transition Between SWF's
I have a main movie. Then 7 movies that load into that movie via a movie clip. I have 7 buttons that load the movies. They load fine as of now just off of "movieclip.loadmovie("blah blah"). When they load, they play an intro up until my action script tells it to stop. When a button for another movie is pressed, another movie is loaded, the intro is played until stop. My problem is, I have an outro for each of the 7 movies. And I want the outro to play before the new movie loads. Any ideas?
Transition Help
Anyone know how to do this? I figured out the buttons and the drop down menu on the right. All I need now is to figure out how to do the fade effect when you go from one page to another. Thanks for the help. FK
http://69.20.52.206/laring/portfolio/main3.html
Swf Transition Help
I have a main swf calling external swf's into a blank mc. The bg image of each section is a picture that fades from 4 color to sepia tone. The problem I am having is that when I go to another section I am getting a flash of white just before the next swf loads up. Is there anything I can do that would help this to transition to be more smooth? I am including an fla in this post and 2 of the swf's I am calling into the next post because they are just a little bit larger than 300kb together. TIA for any help.
How Do They Do This Transition Between Pix?
how do they do the transition between the in http://www.imagevuex.com/imagevue/ ??? i know how to use alpha in a mc (fade in or out) but on that site, when u click on a thumbnail it shows the whole pic, then u click on a number at the bottom, it fades out in a different way. its almost like the intensity or saturation is increasing. i am trying to use the same effect on a website i am creating, http://www.condiffphotography.com/, in the wedding section. Thanx for ure help
austin
Transition
Hello,
I need some help modifying a .fla from this tutorial...
http://www.kirupa.com/developer/mx/p...transition.htm
I would like to know, how can I have more than 1 transition effect?
In the kirupa tutroial, they just have 1 simple transition effect (the orange blinds closing vertically) for all the buttons, but...I would like to have different transition effects for each buttons.
Thanks in advance.
Help With Transition
Hey, I am a webbuilder, I know several different languages like php, html, java, stuff like that.. And I never really payed attention to much flash (other than making something simple like a menu.)
I was spending some time messing around with Flash MX 2004 Professional, and I can't quite seem to get the stick figures to look like their moving... I wanted to make something such as the Xiao Xiao movies on http://www.newgrounds.com
if someone could help me than thanks for the help but help fast! plz!
XLM Transition
Hi
I'm loading Images from an XML file onto my stage. They change every 2 seconds. Will change to approx 10 second at later time.
I would like to create a transition between the loading images. Preferably a fade out and fade in effect. How do I do this???
See attachment.
Thx
Transition
I was hoping that someone may know how to accomplish this transition within the car ad that I found with actionscript. I can do this by making alot of masks within my FLA, but there has to be a faster way with Actionscript.
The website is here: http://www.cheapcarsearch.com/?hop=964rscs. The car banner at the top has a venetian blinds type transition. HOw is this done? Any help or guidance would be greatly appreciated. Thank you!
How To Do This Transition?
On www.HelensGarden.com , I want to make the first transition that happens on the photo at the top of the page. (you have to wait a sec. to see it). I know how to do this manually. By making a long white bar that fades up then down over 10 frames, repeating that down over the photo, and then creating a layer mask over the new photo that is in sync with the bars going down.
But I want to find out how this would be done in actionscript. I am trying to move away from doing everything manually because it seems like it would be a lot easier to do in ASonce I can learn how.
|
TRACKER
