Flash :: Width Vs Height

Get Height And Width
I have a instance of a button into a flash swf file.
This button have next instruction:

on(release){
getURL("javascript:window.open('http://www.xxxx.com/site/photo.jpg,'name_your_window','height=200,width=200 ');void(0);");
}

Every jpg file have diferent sizes. How can i get the height and the width of the jpg files to open the new window with the original sizes of the jpg photo.

View Replies ! View Related

Getting Height And Width Of An MC
How do you get the height and width of an MC using actionscript ??

Thx in advance

View Replies ! View Related

Width And Height
Are all the screen resolutions proportional to each other? You see, I need to make a full screen SWF, and I am wondering if it will look the same in different resolutions.

View Replies ! View Related

Width And Height?
So i have this picture, that loads into 2 movie clips, movie clip A is on screen and is reduced in size, movie clip B loads off screen and is full size. I have 2 text boxes that take the height and width of picture B, and load them into the text boxes. Now, movie Clip A the code for it is this:

onClipEvent (data) {
this._height = 300;
this._width = 400;
}

But i want something like this:

onClipEvent (data) {
this._height = text from the dynamic text box divided by 2;
this._width = text from the dynamic text box divided by 2;
}

so...i tried this._height = this.height/2 but that just kept shrinking the pictures by 50% as i kept scrolling...

View Replies ! View Related

Max Width, Height
Dunno why but when i load images into a movieclip....the max width the mc can have is 2880 so larger images are not completely visible...is this fixable? i mean what if i want it to be till 4000 for example....

View Replies ! View Related

Height = 100% Width = 100%?
http://www.dieselmarketing.com

amazing site but I would like to know how they keep the flash movie at 100% height and width without stretching the center content.

The dashed lines seem to conform to the browser size yet the body of the movie stays the same size...how is this effect possible anyone here know or have any ideas?

View Replies ! View Related

Swf Width/height
Is there a way to determine the width and height of a movie when you don't
have the source .fla file? I'm embeadding a flash movie into an .aspx page
and I don't know the width and height of the movie? Is there a way to
determine the width and height for the movie?

View Replies ! View Related

Get Width And Height
How would I get the width and height for an embedded flash movie?

View Replies ! View Related

Width And Height
Hi

I have a movie object that I want to horizontal align depending on my configuration in my HTML-embed-width/height.

Is that posible?

I have played around width it using

Stage.align = "TL";
Stage.scaleMode = "noScale";

But I have found that if I set HTML configuration to width="300", the Stage width is allways what I have set in my Flash document properties before compiling and my movie object aligns acording to document properies.

Edit:
Right now I am solving this with sending the width and height as URL parameters

But is there another way?

Edited: 05/02/2007 at 02:18:15 PM by tan73

View Replies ! View Related

Height, Width?
When i click MC "box" i want MC "sleep" to move(which it does) but i also want it to change the height and width while it's moving. How can i go about doing this?

Quote:

speed = 5;
endX = box._x;
endY = box._y;
end1X = sleep._x;
end1Y = sleep._y;
end11X = sleep._width;
end11Y = sleep._height;
box.onRelease = function ()
{
end1X = -583;
end1Y = -0.010000;
end11X = 442;
end11Y = 136;
if (_root.section != "/images/gallery.swf")
{
_root.section = "/images/gallery.swf";
_root.transition.gotoAndPlay("closing");
} // end if
};
_root.onEnterFrame = function ()
{
box._x = box._x + (endX - box._x) / speed;
box._y = box._y + (endY - box._y) / speed;
sleep._x = sleep._x + (end1X - sleep._x) / speed;
sleep._y = sleep._y + (end1Y - sleep._y) / speed;
box2._x = box2._x + (end2X - box2._x) / speed;
box2._y = box2._y + (end2Y - box2._y) / speed;
box3._x = box3._x + (end3X - box3._x) / speed;
box3._y = box3._y + (end3Y - box3._y) / speed;
};

View Replies ! View Related

100% Width And Height
Hi check out: http://www.wellvetted.com

This site always looks good irrespective of the resolution you use. When I looked at the page source I noticed they set the swf size as 100% for both width and height. I tried this a a site but it looked awful...

Anyone know how to do this so it always works?

thanks

ash

View Replies ! View Related

100% Width But Not 100% Height
i need help with a full flash page. it's kinda tricky. it may also be a little tricky to explain so be patient with me.

the width is 100%. that's easy. the content in my swf takes up about 900 pixels. so for example it's too big for 800x600 and if i use 100% height the bottom content is chopped becuase the browser scroll bar is non-existent(we're using 100% height).

but then if i define a height, say 1000, then the swf may not occupy 100% of the height(if someone's using a large res).

the only thing i can think of is to use a really big height that's greater than the biggest resolution. but this sucks for small resolutions because there'll be a big empty space at the bottom.

see what i mean?

isn't there a way to use a minimum height?

View Replies ! View Related

Can't Get Mc's Width And Height
I'm a student for design and want to build myself a portfolio, showing pictures and being able to jump between fit_to_screen mode to actual_pixel_size mode. The following code is just the beginning.

I've wrote the code mixing some tutorials (sorry, but I didn't find a good way to clean it so it'll be more focused) - I'm a really new about action script.

myFile is a mc waiting for an external parameter run_url - a string contains something like "/projects/illustration/alice_in_wonderland.jpg"

You can see the trace command marked as red. I'd expect it to give me a number of the movie clip's width, yet i get "undefined" - Where is my mistake?

import mx.utils.Delegate;

var streamingID:Number;
var fileLoaded:Boolean;
var dBar:MovieClip = this.Bars.dBar; //downloading bar
var progBarFactor = dBar._width/100; //pixel to percents
var spacing = 10;

function displayStreaming (theSource:Object) {
if (fileLoaded) {
clearInterval (streamingID);
dBar._x = dBar._width;
} else {
var percentLoaded:Number = Math.floor((theSource.getBytesLoaded()/ theSource.getBytesTotal())*100);
dBar._x = percentLoaded*progBarFactor;
}
}

function doneStreaming():Void {
fileLoaded = true;
}

function screenFit (){
if (myFile.width > Stage.width - 50) {
myFile.width = Stage.width - 50;
}
if (myFile.height > Stage.height - 50) {
myFile.height = Stage.height - 50;
}
myFile._x = Stage.width/2;
myFile._y = Stage.height/2;
};

fileLoaded = false;
myFile.loadMovie(run_url);
onEnterFrame = function(){
var total = myFile.getBytesTotal(), loaded = myFile.getBytesLoaded();
if (total != 0 && Math.round(loaded/total) == 1){
var w = myFile._width + spacing, h = myFile._height + spacing;
screenFit();
}
}
trace (myFile.width);
myFile.onLoad = Delegate.create(this, doneStreaming);
streamingID = setInterval (displayStreaming, 100, myFile);
stop();

View Replies ! View Related

100% Width And Height
Hi people,

I've been learning AS3 in the past few weeks but I am a bit confused at the moment. What can I do to have a movie clip occupying 100% of the window's width and height in every resolution.

Example: http://www.marc-aurel.com/2007/

Thanks in advance and sorry If this has been already discussed.

View Replies ! View Related

Width Vs Height
hello.
still looking how to maintain max. stage width and height for some lines i want on the screen.
i have managed to achieve it on the width, but for some reason have been unable to do it for the height. that is, i have managed to make a line go from one side to the other (almost) but cant figure out how to do it on the vertical.
zbot is the horiz line at the botton
ztop for the one above
the problem, is for xleft (the vertical lineon the left)
i have included what i think to be the nearest code yet, and a fla.

Stage.align = "LT";
Stage.scaleMode = "noScale";
bg._width = System.capabilities.screenResolutionX-20;
bg._height = System.capabilities.screenResolutionY-70;
bg.onResize = function() {
this._x = (Stage.width-this._width)/2;
this._y = (Stage.height-this._height)/2;
};
Stage.addListener(bg);
zbot._x = 62;
zbot.onResize = function() {
this._width = Stage.width;
};
Stage.addListener(zbot);
////
xleft._x = 270;
xleft.onResize = function() {
this._height = Stage.height;
};
Stage.addListener(zbot);
////
ztop._x = 62;
ztop.onResize = function() {
this._width = Stage.width;
};
Stage.addListener(ztop);
// get the content clip to stay fixed horizontally centred
content.onResize = function() {
this._x = (Stage.width-this._width)/2;
};
Stage.addListener(content);
// manually invoke the onResize events for the clips to start things off
bg.onResize();
zbot.onResize();
ztop.onResize();
xleft.onResize();
content.onResize();

View Replies ! View Related

Fix Width & Height
hi friends,

I have an flv player & i want to set it's width & height.

The following script set it to no scale :

Stage.scaleMode = "noScale";

This one set it to the width & height of stage :
w = Stage.width;
h = Stage.height;

Which code should i use to set it to desired width & height. For instance : 400 * 300 pixels

Cheers, Rohit

View Replies ! View Related

Width Height
Hi
I want to scale a mc and i know it can be scale with

mc_xscale = 20
mc._yscale = 20

here it shows that i am scaling mc to 20 percent

now i want to reduce the mc size to 20 px
i know it can be done by

mc._width = 20
mc._height = 20

but the the problem is i just know that i want to reduce mc to 20px but i don't know the height .
so is there any way that if i say i want to reduce mc to 20 px and actionscript can automatically proportionately reduce the height without distorting the shape of MC.

thanks

View Replies ! View Related

Width=100%, Height=15
I have a gradient png, it starts as white and fades to transparent. My problem is though, I need it to be 100% wide, but only 15 pixels tall. I've tried everything, and still can't get it to become more than 24 pixels wide (the size of the flash file/image). Does anybody have an suggestions?

Publish settings are windowless transparent and noscale. This is the code that I'm using:

Code:

<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="100%" height="13">
<param name='AllowScriptAccess' value="always">
<param name="movie" value="images/pngbot.swf">
<param name="quality" value="high">
<param name="wmode" value="transparent">
<embed src="images/pngbot.swf" quality="high" wmode="transparent" pluginspage="http://www.macromedia.
com/go/getflashplayer" type="application/x-shockwave-flash" width="100%" height="13"></embed>
</object>

Thanks in advance!

View Replies ! View Related

Sence's Width And Height
How to get sence's width and height?
getbounds/ _root.width/ _root.height
They do not work.

View Replies ! View Related

LoadMovie Height/width
Is it possible to get the height and width of a .swf loaded into a target movie clip? Here's what I'm doing (simplified for clarity):

I've got an instance of a movie clip called "content." I'm loading a .swf into with:
content.loadMovie(path);

Then I want to resize content to fit within a bounding box and maintain proportion, *including negative space*. It works fine with .swf's that fill the stage, but with .swf's that have small amounts of image, content._height and content._width return values of the actual pixels contained in the .swf. content.getBounds().xMax and content.getBounds().yMax return the farthest right and bottom pixels. Can I get a value for the extra negative space to the right and bottom of the pixels.

The obvious fix is to go in and add borders around all of my movies, but that's not reasonable.

View Replies ! View Related

Changing Width Also Changes Height
Hi all,

I've got an mc where you can change the width interactively: the border becomes longer.

Code I use:
onClipEvent (mouseMove){
this._width = _root.kader.links._x + _root.kader.rechts._x + 3;
}

Alas the border also becomes thicker when streched to the maximum. This is ugly. Can I do something about it?

Look here if you want to take a look (drag the left and right border):
http://home.wanadoo.nl/d.roberts/stuff/langste_dag.swf

Thanks very much in advance, Danielle.

View Replies ! View Related

Controling The Width/height Of An Mc.
I have tried to load an external .swf into an MC in my flash move. No matter how big or small the exteranl .swf is I want it match the dimentions that I set the MC to. For example,
this._width = 100;
this._height = 100;

When I set width and height to the MC the exteranl .swf that I load does not show up. Has any one esle had this problem and was able to fix it?

Thank you all in advance.

View Replies ! View Related

Getting Width And Height Of LoadMovie Swf?
I am loading an animated movie clip with...

myclip.loadMovie("myswf.swf");

then trying to get the width and height with

mywidth = myclip._width
myheight = myclip._height

problem is that the size I get back is the size of the animated element and not the stage size it was created on. Is there anyway of getting its stage size??? Because the animation is moving in an out of its stage the size also keeps changing.. Help, this is driving me around the twist.

Cris.

View Replies ! View Related

Height And Width Vs. X/y Scale
I'm working in Flash MX once again and have stumbled upon a bit of a problem with both the height and width and the x&y scaling. So I have a question and then my problem. First off I was wondering for increasing the size of an MC, which is perferably used (or both)?

As for my problem, I'm trying to make a Movie clip bigger when a dynamic text field acting as a counter, goes up. So for example it starts at 50, when it reaches 75 the movie clip would "grow" bigger. I was wondering because I had this idea where your an amoeba and everytime you eat a piece of food, it raises your food level and you get bigger. Any help on the matter would be appreciated.

Wattsman

Flashkit rocks!

View Replies ! View Related

Spring To Width And Height
I have set up a mc to spring to a typed in width and height. But the problem is it is not springing to the numbers typed in. If you look at the mc when it says 200x200 the box is actually 50X50.

Code:
k = .2;
damp = .8;

photoScreen.onEnterFrame=canvasMove;
function canvasMove() {
the_width = xwidth;
the_height = yheight;
trace(the_width);
//X Scaling
var tx = the_width-photoScreen._width;
this.vx += (tx-photoScreen._width)*k;
this.vx *= damp;
photoScreen._width += this.vx;
//Y Scaling
var ty = the_height-photoScreen._height;
this.vy += (ty-photoScreen._height)*k;
this.vy *= damp;
photoScreen._height += this.vy;
}

View Replies ! View Related

Forcing Width And Height
i am trying to pass querystring variables to modify the height and width and a movie. When I pass it, the proportion are staying constrained (ie. 100 x 700)

I don't know if I need to modify in the web page (ie. WIDTH="#hgt#" HEIGHT="#wdt#") or in actionscript and if so, how

thanks

View Replies ! View Related

Getting The Height And Width Of The Movie
hey there, does any know how to do this? I just want to set them both as variables. I thought it was this:
_root.currentw = getProperty(_root, _width);
but it always telles me:
263.65 for a movie that is 550

any ideas????

View Replies ! View Related

Height And Width Of EmptyMovieClip
I might be approaching this problem from the wrong direction, but I am interested to see if anyone else has run into this situation, and if there is a better solution than my rather unorthadox one.

Problem: I am creating an empty movie clip into which items will be placed at runtime. The placement should be constrained by the height and width of the movie clip. This is a problem since you can't assign h/w to an emptyMovieClip.

Solution: The answer I came up with was to draw a rectangle in the emptyMovieClip at the desired size with an alpha level of 0 (aka invisible).

Has anyone else run into a situation like this? Is there a better way? Thanks in advance!

View Replies ! View Related

Width&height When Exporting
i have exported a page and publish it at 1000 width and 580 height so that it fits well in the windows explorer but the explorer always displays it a few pixels down and right. how can i make it so that the blank space from the top and left won`t apear again??
pls hlp. thanks

View Replies ! View Related

Width And Height Of A Jpeg Pop Up
I want to click on my button and have a jpeg open up. Which I have succeeded in doing. what I want though is for the jpeg to open up with its dimensions ie. 400 X 350 in a separate window.

I have been trying all sorts of combinations and looking through all of my books including actionscripting and can not find the right script to get this to work. Is it a property, a variable, an expression, a combination of? I don't know the correct verbage.

I am using Flash MX. Pease help.

View Replies ! View Related

Height And Width Restrictions
Hi

quick question. is there a height and width restriction in flash.
the actually main page i mean, are there restrictions.
reason i ask is i created the page 500 by 2100...now it's gonna be a pop up...which is 500 by 300 with a scrollbar. now for some reason it only displays most of the text..the rest does not show up...any idea why.

View Replies ! View Related

Move X/y Width/height
Hi--

This is probably simple, but I don't know the actionscript to do it.

I would like to move a mc to a specific X/Y axis and a specific width/height. Something like:

on(release){
move mc x=100
y=100
width=100
height=100;
}

Well, something like that.

Any help would be appreciated. (I have to find my actionscript dictionary!!)

Thanks

View Replies ! View Related

How Do I Get Stage Height And Width In 2.0?
In 1.0 it was stage.height, but I try it in 2.0 and when I trace it, I get "undefined".

trace(stage.height);

What am I doing wrong?

View Replies ! View Related

Get An Image Height And Width
hi,

i'd like to know if there's a way to get an JPG image's height and width before i load it into a clip

Thanks

View Replies ! View Related

Compoenent Width/height
hello. Dynamically resizing mcs on the stage is nifty, I like it! But I am running into a...wall is such a cliché, but in the lack of a better word, let's just go with the wall. I need to know how I can resize components without scaling their content. using _width and _height scales the content and it's data, which is not what I want to achieve.

Any pointers would be vastly appreciated

V.

View Replies ! View Related

No Borders With 100% Width And Height
I'm trying to match the dimensions of my movie to fill the browser window 100% width and height without scaling. I went to settings, html, dimensions and set it the percent to 100% and the scale is showall. Yet there is these wide borders around the sides of the movie...how do I get rid of the wide borders ?

Any info is of course appreciated.

View Replies ! View Related

Scale To Width, But Not Height?
I have implemented what I think is a somewhat unusual use for full frame Flash, by creating a movie that expands to 100% of the browser width but is fixed in its height. This is the URL of the site:

http://www.palmspringslife.com

The trouble I am having is that in Firefox and Safari, when the page is loaded, it sometimes (not every time, strangely enough) seems to expand to about 110% of the browser width, forcing the page width to expand with it. I am not sure why. In Internet Explorer this does not seem to happen.

If anyone has any tips or knowledge in this area that could help me to remedy this, it would be most appreciated.

Thank you!

View Replies ! View Related

Imported Swf Height/width
Hi

I'm using MovieClipLoader to load swf files into a container mc and attempting to use the _width and _height properties of the container after the swf is loaded to do other stuff. The trouble is, those height and width values are including things that aren't on the stage in the imported movie.

How can I get around this? Why are the off-stage objects in the imported swf being counted in the height/width?

thanks
mark

View Replies ! View Related

Can I Set The Index To Be 99% In Width And Height...
and then have javascript inside my Flash movie order it to expand to 100%?

Is this possible? If so, how do I set that inside of the movie?

View Replies ! View Related

Movie Height And Width?
I don't know why but I cannot seem to figure out the code which returns my movie's height and width, I am guessing this is rather simple I just cannot seem to figure it out. I tried _root._height but thats not it. Thanks in advance,

ChaseNYC

View Replies ! View Related

IE : Width 100%, But Height In Pixels
I'm trying to make IE understand that I want my SWF to be 100% horizontally but remain 500 pixels in height.

The standard object tag works with Firefox when I specify the width='100%' and height='500', but IE is more stubborn...

I tried to use a javascript to write the movie, but it only works if I put percentages in both width and height.

Anyone had this problem ?

View Replies ! View Related

Width & Height 100%, But I Still Need Scrolling?
hello hello...

im looking for tutorials on 2 things....

I have a flash site that has its width and height set up to 100%... but the content is 660px tall... so some users will need to scroll...

how do I tell my flash site to be 100% width and height, but tell the HTM file to have a scroll bar for the 660px of content height....

--------------------

i've seen flash sites that have a flash scroll bar... were can i go to find one?

anyone know?

THANKS A MILLION IN ADVANCE!!!!
-manny

View Replies ! View Related

Getting A Bitmaps Width And Height.
so this code loads and displays the bitmap just fine but for some reason it doesn't read the width and height.

Code:
image.load(new URLRequest("key01image.jpg"));
trace(image.width);
trace(image.height);
wDif = image.width / 2;
hDif = image.height / 2;
image.x = 600-wDif;
image.y = 700-hDif;
addChild(image);

Any ideas what I am doing wrong?

Thanks

View Replies ! View Related

How To Get The Width/height From BitmapData?
Hi,

Does anyone know of a way to get the width and height of a bitmapData object that is in the CS3 library?

I have a load of PNGs imported into my Library. The Linkage is set and the Base class is bitmapData (as it should be). The images are then given a Class such as "playIconPNG" which I can use in my AS3:

Code:
playButton = new Bitmap(new playIconPNG(70, 35));

But if I change the image in CS3 I then have to update the coordinates in the code above too, which is a pain in the arse when you do a large update.

So is there a way to get the width/height set automatically?

Cheers,

Rich

View Replies ! View Related

Different Width/height In AS3 And Flash
When i do a Select All of my symbol in Flash I get a height (lets say 300x300). Even if there are multiple items, it groups them together to give me the total size.

In AS3 I never get the same size. I have tried calling getRect(), width/height, etc... I get a very different size (usually much bigger than what Flash tells me)

How can I get the actual size of my symbol? So far I have been forced to hard code some widths/heights but its horrible and hard coding won't work for me much longer as things get more complex it needs to be able to do it dynamically.

Regards

View Replies ! View Related

Createemptymovieclip Height Width
I'm trying to trace the height/width of a loaded jpg file:

Code:
this.createEmptyMovieClip("logo_mc", 999);
loadMovie("test2.jpg", logo_mc);
trace (logo_mc.width);
trace (logo_mc.height);
This doesn't work. I gives undefined. I've read that first I would have to let Flash know that the jpg has been fully loaded. How would I do that? I've tried using getBytesLoaded/getBytesTotal, but then it gives 0 for both getBytes.

Also used stuff like this, but that doesn't work either:

Code:
this.createEmptyMovieClip("logo_mc", 999);
loadMovie("test2.jpg", logo_mc);
logo_mc.onLoad = function() {
trace (logo_mc.width);
trace (logo_mc.height); }
How do I check whether the jpg has been fully loaded before I can show/alter it's dimensions?

View Replies ! View Related

Fixed Width And Height?
I have a movie "product" inside a movie "contProduct". Now I increase the width and height as well as the _x and _y of the "product" movie. But I want the "contProduct" movie to stay the same size so that the "product" movie can grow without growing over the whole swf.

Can this be done??

View Replies ! View Related

How Do I Set The Width And Height Through Actionscript?
Hey guys i'm opening a chromeless HTML window by calling javascript through my actionscript, my question is how do i specify the width and height of the window via actionscript rather than writing it in my JS?

*the reason i want to do this is because i'm going to be opening multiple pages and i don't want to write a different JS function for every page.

Here is my JS:

Code:
<script language= "javascript">

function images(page) {
Openwin = this.open (page, "Images", "toolbar=no, menubar=no, scrollbars=no, location=no, top=0,left=0");
}

</script>
Here is my ActionScript:

Code:

this.mybutton.onRelease = function(){
getURL ( "javascript:images ('myurl.html')");
}
Thanks!

View Replies ! View Related

Swf Width & Height Problem
I have one swif file with the size of 140px (width) and 600px (height). Whenever I'm inserting this swf in html it is coming with height and width in the code. If I remove the height and with, it is coming 240px X 200px by default. why?

Example:

<object classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="120" height="90">
<param name="movie" value="flashfile.swf">
<param name="quality" value="high">
<embed src="flashfile.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="120" height="90"></embed>
</object>

Because of some coding restraints I cannot use height and width inside html code. Please tell me how to retain the exact size of the swf without using height X width insde object/embed code. ( I would like to retains the above size of the swf animation even after removing that file size width="120" height="90")

Please let me know how to achieve this ?

Thanks in Adv

View Replies ! View Related