Forms :: Default Values Disappear If Put Values In Text Boxes

Sep 17, 2013

In Access 2010 I have a Data Entry Form on which I have an unbound textbox in the header that the user can put a default date in. In the body of the form is a bound textbox that records the date and the default value is set as =defaultdatestat (obviously the name of the box in the header).

Problem: The default date shows up perfectly until a value is put in any of the other text boxes.

For further info : If you put values in text boxes default value disappears; if you then push escape the default value reappears when the values in the text boxes disappear.

View Replies


ADVERTISEMENT

Forms :: Cascading Combo Boxes With Default Values

May 4, 2013

I've got a form (frmMain) with two combo boxes (cmbCategory and cmbProducts). I have set the combo boxes up to be cascading, so that when you select a value in the cmbCategory box, it influences what is visible and selectable in the cmbProducts box. What I wanted to happen is this:

1. User selects a category
2. cmbProducts defaults to the most recently entered Product within that category, and the form pulls up that product's details.

I have the cascading combo boxes set up so cmbCategory has an AfterUpdate event that runs a macro. In the macro is the command to refresh the cmbProducts box, and the cmbProducts box's RecordSource is set to a query that filters the Products based on the value of the cmbCategory box. I then set the cmbProducts Default Value to a DMax command that pulls the largest ID number from the query. Everything works great, except when I choose one category (the correct product comes up, the latest one entered for that product), then go back and choose a different category without reloading the form. The cmbProducts box stays showing the previous Product, and doesn't automatically update with the latest product for the new category. So it works the first time out of the gate, then just stops working, and won't work until I close and reopen the form again.

I've tried the refresh command, and I've tried adding an AfterChange event to the cmbCategories box. Nothing seems to work! I also tried running a close form/open form command in cmbProducts' After Update to enable the DMax command again, but this blanks out my Categories and Products boxes (which it's supposed to... I don't want anything to come up when you first open the form, both should be blank until you start selecting values).

View 2 Replies View Related

Forms :: Filter Text Boxes By Two Combo Box Values?

Aug 6, 2013

I have a form with two combo boxes. The first box lists switch names from a query, and the second lists switchports from another query. The switchport query lists all the switchports for whatever switch is selected in the Switch Name combo box, and all the settings for that port (one column per setting). I want each text box to display the corresponding data from the switchport query for the switch selected in the first combo box and the switchport selected in the second combo box.

View 3 Replies View Related

Forms :: Input Values Through Unbound Text Boxes

Nov 18, 2013

I have a report that selects and shows records where a specified date field is within the range of 2 dates that the user enters.I created 2 unbound textboxes on the report with a Shortdate format and InputMask 0000-00-00;0;_.When user enter correct dates, then everything works fine: selection is properly done, the right records show up.But I have 2 problems:

1-the input mask is not working: the user can input anything!
2-the 2 unbound textboxes do not show the dates entered by the user.

It seems the value entered bu user does not go straight into the unbound textbox. How do I either intercept the value entered by the user directly into the unbound textbox or via a variable?

View 1 Replies View Related

Forms :: Count Or Sum From Values In Multiple Text Boxes In Form

May 24, 2014

I am trying to improve a work process using an existing Access DB.We have a form with multiple texts boxes on it. I need to search through these boxes to determine the total number of occurrences of a specific value. This is not tied to a table.

The text boxes I'd be searching through all have related names: "Element0" to "Element40". And I'd most likely be looking for a "/" within the value in the boxes (value could be 12345/01, for example).Would then be using the result in VBA to apply some conditions, so I would prefer if I could do the count in VBA (the count/sum is the part that is hanging me up.)

I've found multiple ways to accomplish this from a table, but nothing for what I have to work with.I am unclear in my description of what I am trying to do, let me know and I will try to provide more information.

View 5 Replies View Related

Forms :: Save Values Entered Into Unbound Text Boxes To Fields In Table

Mar 6, 2013

how can i to save the values entered into unbound text boxes to fields in table

View 2 Replies View Related

Modify Default Values And Text Strings

Apr 4, 2006

Hello, I have two newbie questions. First, when I design a checkbox in Form design view, how do I program or script the form so it will enter a "1" value on the corresponding tables database per column. (Just like in the option group design, where a click on each option generates a specific value on the tables database).

Second, how can I design the form where it can accept text strings as input and displays them 'as is' in the corresponding tables database as a text string.

Thanks for looking. :)

View 1 Replies View Related

Using A Recordset To Fill Text Boxes With Field Values

Jul 13, 2005

Hi guys,

This is my first post of hopefully many, and I hope to be able to keep visiting and helping others in the future.

I'm building a database at the moment which I've done basing forms on Queries as I'm very familiar with doing so. However, one form in the database if a bit different.

The form in question is for shipping off refurbished units at the warehouse, by adding a SHIP ID to the record for each unit scanned in. The form before creates a recird ubdexed by a SHIP ID in the SHIPPING table, along with some other info such as delivery address and ship date. Each unit will be assigned this SHIP ID by the child form I wish to create, by scanning the Serial Number against it.
Two actions are done on the child form: Read in Serial Number of unit, find record in MAIN table and display key fields such as the units status (i.e. "WIP" or "REPAIRED" into text boxes on the form Allow unit to be shipped (by assigning the SHIP ID to the unit's record in the main table, only if the STATUS field shows as "REPAIRED"
Now, because I want to scan units into the form's Serial Number textbox and do the STATUS field check, then assign the SHIP ID; I need a recordset, right? I've inherited development of datdbases which used recordsets in their forms before, but have never had to create one from scratch. Also I wasn't able to take a copy of the source code of those databases before I left my last company.

Can anyone give me some info on what the bare minimum is to create a recordset, and to use it to save the record once I've made changes.

For your info I would consider myself an Access intermediate, and I've worked with it in various roles and versions for around 5 years.

Thanks,
Gareth

View 6 Replies View Related

Forms :: Entering Default Values

Apr 17, 2014

I have a 1 row table as a result of 2 queries that give me the 'MaxYear' AS 'DefaultYear' and 'MaxWeek' AS 'DefaultWeek' in that year for a selected retailer and stores, from a master table.I want the default Year and Default Week text boxes to display the values of these

I have tried pointing to a table holds the results and pointing to the queries for each box...I have used Form.Refresh and Forms.Requery but nothing picks up my values.

View 2 Replies View Related

Forms :: Multiple Default Values In ComboBox?

Aug 21, 2014

how I can set multiple default values in a ComboBox in a form. The ComboBox is based on a table and my main table also uses the ComboBox.

Example:

Main table has a column "Brands". The ComboBox is based on another table which includes the following items (and thus the ComboBox also shows them):

- CocaCola
- Fanta
- Sprite

The form has the same ComboBox which is linked to the main table.

Now, if a user creates a new form entry, all ComboBox items should be preselected (checked). It does work with one item over the standard "Default" property.

View 4 Replies View Related

Forms :: Setting Default Values For Fields Using Button?

Mar 6, 2014

I have a blank form that is usually entered from scratch, so all the fields are empty.

We do fill out the form with standard data occasionally, so I'd like to be able to assign a button or use a combo box to automatically fill those fields with predetermined data.

Two questions:

1) Can I use a 'on click' for a button to populate the data using this:

Code:

Me.Control1.DefaultValue = Chr(34) & Me.Control1 & Chr(34)

2) If I have a default value fill a combo box, will it save the bound column correctly since I didn't select it from the drop down itself?

View 6 Replies View Related

General :: Summary Form / Home Page - Text Boxes Values From Multiple Queries

Jan 20, 2014

I am currently developing a database to provide a friend with an auction tracking and ordering system.

I will have a number of questions the first is related to the Home Page/Dashboard/Summary form I am creating. I basically have a few sections, one of which is a combo box offering the user to select an auction to view in the summary section. This summary section contains the list of lots but I also hope to to expand on this and create multiple text boxes, each containing the answer to a number of queries (totals etc).

I have written all the queries and can see the results however as the form does not have a record source I would like to know how to make each text box populate with the result of different queries (ideally in vb - I am using ms access 2010)?

I have tried a few things, control source doesn't apply as I have no record source (i guess). I investigated Dlookup/Dcount but am unsure if these apply for the same reason. I understand I am likely to need a recordset etc in vb and have already tried a few things but unfortunately none of them work.

View 1 Replies View Related

Forms :: Multiple Values For Drop Down Boxes

Feb 19, 2014

I have created a database that has both English and French forms feeding information into the same table. I'm not concerned if the info stored in the table is stored in French or in English. It all works fine other then the drop down boxes in the forms, here I only seem to be able to either have the English or the French options visible on both the English and the French form. Is there a way to have the English options on the English form and the French options on the French form, both feeding the results into the same field in the table.

View 8 Replies View Related

Forms :: Allowing Different Values In One Field Depending On Selected Values Of Another

Nov 22, 2013

I have several result fields which are all drop down lists. I want each result field's drop down list values to be different depending on the selected value of the Test1 drop down list.I came up with using the .rowsource keyword. My syntax seems to be fine but I'm not getting any values under the result fields when I run the form.Here is my code so far:

Private Sub Test1_AfterUpdate()
If Me.Test1 = "Stress Echo" Or Me.Test1 = "Stress SPECT" Or Me.Test1 = "Stress PET" Or Me.Test1 = "Stress MRI" Then
Me.Test1Result2.RowSourceType = "Value List"
Me.Test1Result3.RowSourceType = "Value List"

[code]...

View 14 Replies View Related

Forms :: Filter On Text And Numeric Values?

Oct 17, 2013

I've created a macro to use an unbound textbox to filter a form. In a query, I combined 3 fields to enable an easy search over. Sadly, only text characters work for the search, so whenever I search for numeric values, it returns null. This doesn't happen if I utilise the filter over just a numeric field - only when the search field combined multiple fields.

Is there a simple solution? My marco filter is

Code:
[Forms]![STAFF SEARCH FORM]![SEARCHDATA] Like "*" & "[SEARCHFIELD]" & "*"

View 1 Replies View Related

Default Values? :(

May 30, 2007

Hi all,

Is it possible to make the default values of a table with symbols in it?

I have a database that returns results with pictures and links included. What Im trying to do is make it as quick as possible to enter information, i've got the ASP page returning everything correctly but I still have to copy n paste certain things onto every form entry in the database.

<img src="
<a target="_blank" href="
"
<a href="notify.asp?choice=

These are all the things I couldn't get into the ASP code on the page. When i enter data I just have to flick back a page, copy, flick forward and paste for every section that has symbols (theres about 7 of em)...... gets a bit annoying after only 5 pages.

I hope thats enough info and not too confusing. Thanks to anyone that can help.

View 2 Replies View Related

Pls Help - Default Values

May 30, 2007

Hi all,
This is my first post, i can't find the answer to my question anywhere so hopefully someone out there can help.

Is it possible to make the default values of a table with symbols in it?

I have a database that returns results with pictures and links included. What Im trying to do is make it as quick as possible to enter information, i've got the ASP page returning everything correctly but I still have to copy n paste certain things onto every form entry.

<img src="
<a target="_blank" href="
"
<a href="notify.asp?choice=

Tese are all the things I couldn't get into the ASP code on the page. I just have to flick back a page, copy, flick forward and paste...... gets a bit annoying after only 5 pages.

I hope thats enough info and not too confusing. Thanks to anyone that can help.

View 1 Replies View Related

Default Values

Feb 13, 2006

Hi
The database is all about an athletics league, and i have set up a form for a query that i have made. When I open the form, i get the parameter box asking me which Venue ID i would like to choose, now what i would like is, whatever i type into that box to become the default value in one of the fields in the form.

i think that makes sense


Thanks In Advance

MATT

View 10 Replies View Related

Need Some Help With Default Values

Mar 27, 2006

Hello,

I created a db for my property owners association. I have created a formula that adds up each year, but it won't let me do that unless I put in 0.00 for the blank fields. I was wondering if anybody could let me know if there is anyway that I can have 0.00 placed in the field so that my formula will work.

Thanks-
Compredneck

View 5 Replies View Related

Default Values

Jul 25, 2005

I have a form that when the user clicks a button a record is transferred to a new table/form. In the new form there are some extra fields that need to have default values in them. I tried setting the default values in the properties menu but that only works when creating a new record. Is there a way to have default values come up on a transferred record?

View 1 Replies View Related

Default Values

Mar 13, 2006

On a form I have text box named ImageVersion, and it has a default value of AO-02.17.06. It is likely that the image version's will be updated, it would be helpful if the user could change the default value currently set.
Right now, I can do this temporarily, but it does not stay once the form is closed. If the form is closed, then opened, it reverts to the original default value set.
I am not using a split database. I have it setup on a server, and users access it through there.
Any suggestions?

Jared

View 4 Replies View Related

Forms :: Sort Values / Text Based On Active Field

Feb 5, 2014

In a form is there a way to change sort order based on which field is active?

I'm using a Split Form which gives me the ability to sort by clicking on the header name ans selecting sort. This slowing things done since my workload is heavy.

View 3 Replies View Related

Assign Default Values

May 16, 2006

Hi, in my database I have a 7 subforms that shows fields for daily tasks for each day of the week. On the Monday, the tasks are assigned and then stored for every record for the corresponding date. The process is done again on tuesday, then wednesday etc. However, often the daily tasks for say tuesday will be very similar (sometimes the same) to that of monday's.

Therefore is there a way to set the default values for each day as the previous days tasks and then alter them if needed?

Thanks for helping!:o

View 1 Replies View Related

SQL DEFAULT Values In Access

Nov 22, 2006

I am currently attempting to use SQL in Access to alter a table by adding a new attribute and giving it a default value. Creating the attribute is fine but i keep getting an error when attempting to assign a default value. My code is as follows:

ALTER TABLE Objects
ADD Status Text DEFAULT 'Object is Currently In';

It keeps telling me that I have a Syntax error.

Any help would be greatly appreciated.

Thanks

View 3 Replies View Related

Prompt For Default Values

Aug 1, 2007

Hi All,

I am hoping to create form that will prompt the user to enter default values for certain fields ie Week No and WB Date before allowing any data to be input into the form.

Any help on how to do this would be appreciated.

Thanks,

Mary

View 3 Replies View Related

Setting Default Values?

Feb 19, 2007

Hey guys,

I'm not sure how to do this, and I can't find any info about it, but is it possible to set a value for my date field to accept either

1) date
2) "TBD"
3) null

Is there a way to allow and exception of "TBD"?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved