Forms :: Using Command Button To Select Image And Show It In Access Form One After One?

Feb 26, 2015

in the attached form i can select multiple image but my next and back button does not work ,also i want the path to the file shown above.to copy the name from there and paste it in the table,to write remarks.

View Replies


ADVERTISEMENT

Forms :: Access 2010 / Show Image Based On Click Continuous Form Record?

Oct 29, 2014

I have continuous form in Access 2010 and I would like when user will click on record, the image, for instance, imgTest become visible for that record. But for other records the image not visible. How it to do?

View 6 Replies View Related

Command Button Open Image

Jan 29, 2005

Is it possible to have a cmdButton open a pre saved image from your hard drive. The images are saved with the same name as the Account Number. (ex: AcctNum -- TA123409 Image -- TA123409.bmp) I want the cmdButton to open the image filtered or based on the Account Number. If so, could someone show me a sample OnClick code. Thanks

View 7 Replies View Related

Forms :: Open Word Document Via Access Command Button

Feb 4, 2014

I am creating a database. I have all my forms, queries, tables, reports just as I need them. However, I would like to have a command button on my switchboard that will pull from a query to feed to a Word document (that's actually a letter on my company letterhead). I know a Macro has to be involved with this, but again, I have little to no knowledge of Macros. Also, I would like to be prompted to enter a client ID number when I click on this command button (because I only want to print a letter for a new client, not all of them).

View 4 Replies View Related

Forms :: Command Button Outline When Form Loads

Dec 5, 2013

I have a couple of command buttons on a form. They have embedded bitmaps as pictures with a caption below. For some reason when the forms loads (and also in design view), there is a narrow white outline / border around them. As if the button is drawn on a slightly larger white square?This border disappears as soon as I hover over the button (in form view) or click on the button (in design view).

View 3 Replies View Related

Forms :: Adding Import Command Button To A Form

Nov 4, 2014

i am trying to add an import command button to a form so that personnel not familiar with Access can simply push the button and then select the file to import. I want it to import information to a specific table by replacing all records in the current table with the import. I am not the best at coding, but I can understand enough to figure out what I may need to do.

I will be exporting a table to excel from the database. Multiple people will have this database and often times will not be able to access a shared database, so I need to export the table and then set up a way for them to import the excel document into their database by deleting the information in the old one and then updating to the new one.

View 1 Replies View Related

Forms :: Continuous Form With Command Button On Each Record To Open Another Form

Jul 30, 2014

I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.

At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.

continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"

pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"

This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):

1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid

2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid

3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria

4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub

View 9 Replies View Related

Forms :: Copying Command Button Appearance Properties To Other Command Buttons

Dec 17, 2013

I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .

View 2 Replies View Related

Forms :: Possible To Use A Command Button To Update Matching Records In A Form

Jul 7, 2014

Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with
the text from column 2:

NL-F and NL-M = Normal
VUS-F and VUS-M = Variant of Unknown Sig.
A-M and A-F = Abnormal

There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.

Cytogenetics ID Result Final TAT Date
14-0390 Normal 4/11/2014
14-0396 Variant of Unknown Sig 4/18/2014

View 1 Replies View Related

Forms :: Command Button In Subform Continuous Form Not Working

Mar 17, 2014

I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.

Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition

Code:

[ID]=[Forms]![sbfScoutRegDetails]![ID]

Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.

View 5 Replies View Related

Forms :: Command Button - Form Opens To New Record But Not Specific One

Jul 2, 2013

I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.

The command button that opens the second form from the first uses the following VBA:

DoCmd.OpenForm "ZooMobile Incomplete Booking-Return Client", , , "[Event_ID] = " & Me.EventID

This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.

Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.

I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.

I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.

View 4 Replies View Related

Forms :: Control Form Command Button Based On Subform?

Sep 2, 2014

i have some command button and some combo box on my form and also a subform. the subform contains some field. the fields used to enter numeric values.

i need to disable my command button on the form based on the subform fields if they r null.

View 1 Replies View Related

Forms :: Filter Form With Two Text Boxes / Command Button?

Mar 22, 2013

I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:

Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday

I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.

View 2 Replies View Related

Forms :: Creating Command Button On Form Containing Drop Down List Of Commands?

Nov 30, 2013

I wish to create a forms that has command button which display a drop down list. The drop down list should contain commands for reports and forms.

Lets assume we have forms named FrmStock, FrmSales and we also have Reports named RptUserLog , RptTurnover.

View 3 Replies View Related

Forms :: Cannot Select Form With Button Inside Tabs

Jan 29, 2014

I have a master form named frmCustomer. I then have a set of tabs (not the navigation tabs) embedded within frmCustomer. The tabs are Invoice (frmInvoice), Contacts *frmContacts), Notes (frmNotes) and Orders (frmOrders). All form are Single Form. There is another form named frmInv that displays an invoice in a formatted manner. frmINV gets its data from a q1uery called InvQ.

It has a criteria that reads [Forms}![frmInvoice]![Invoice_ID]. I placed a button on frmInvoice that calls frmInv. If I run frmInvoice separately outside the tab the correct invoice displays. If I click the buttom from within the tab I am asked to enter the vale of [Forms}![frmInvoice]![Invoice_ID]. How do I call the frmInv form from the tab?

View 5 Replies View Related

Forms :: Updating Form Properties Dynamically - Command Button To Display Mode

Apr 16, 2014

I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.

The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:

Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String

[Code] ....

Here the first two cases fail when executing the last statement saying it is not supported.

View 5 Replies View Related

Forms :: How To Show Image In ComboBox

Jan 4, 2014

I have a question about combo box , i want when i click on combo box show picture , for example i create a form by 2 languages (English,French) each language have a specific flag , when i click on the combo box show English and beside English show USA flag with French Language and beside French show flag of French.

View 3 Replies View Related

Forms :: Using Mousemove VBA To Show Image?

Nov 4, 2013

I have a form with mulitple buttons that run different reports, I've used the mousemove VBA script to show text about the report when the cursor is placed over one of the buttons that all works fine.

Can get it to display a image when the cursor is placed over a button.

It'd just be a screenshot of the report output so the user gets an idea of the layout before they run it.

View 7 Replies View Related

Forms :: Show Image Based On Another Control Value?

Nov 5, 2014

I have a text box [txtTrafficValue] that is a calculated field of two short times. I want an image to be visible if the value is >= 0.0104 (15 minutes). I have in the after update of the field:

if me.txtTrafficValue >= 0.0104 Then
Me.imgWarning.visible = true
Else
Me.imgWarning.visible = false
End if

but when the field does the calculation and updates the image is not appearing.

View 5 Replies View Related

Forms :: Command Button To Unlock And Lock Fields / Edit Button?

Feb 19, 2014

I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.

SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.

I have changed the Form properties so that Data Entry and all the "Allows" are set to No...

View 9 Replies View Related

Forms :: Create A Button To Open A Form To Show Specific Records

Mar 4, 2014

I have a main form [Job Quote Form 10-2205] and I am trying to add a command button to open up [Job Process Form-MKD] and have the [Job Process Form-MKD] open up and only show the records that match a certain field, in this case what I call "JobTrackNo" in the [Job Process Form-MKD]. (see attached .jpg)

This problem started to happen only recently, namely you will see that the left column under [Job Quote Form 10-2205] is blank, where normally there had been a number of fields to choose from. The fields are all still available, they are just not opening when I try to match two fields.

View 2 Replies View Related

Forms :: Button To Link To Image

Apr 10, 2013

I'd like to put a button in a form that when clicked opens an image on the computer, the location of which is already specified in a field called RefImage.

When I change the hyperlink property I can only have the button open a folder or internet address rather than a unique image for each individual record.

If I use the code builder for the event on click and try to write Application.FollowHyperlink RefImage it gives me error message 490 that it Cannot Open the Specified File, but this is probably because I don't know how to write VBA.

Any simple way to make a button on a form open an image in IE or windows image viewer which has a path specified within a field of the form? Perhaps someway to use the Application.FollowHyperlink, clearly I am doing something wrong.

View 8 Replies View Related

Forms :: Show Image / Text / Xlsx File In Continuous Subform

Jul 12, 2015

I want to show an subform where in I would like to display images,txt,xlsx that are stored in a directory as icons which when clciked would open the respective files.The info related to the images are stored in t_CustomerFiles.

Record ID, CustomerID, DestinationPath,EventFileName,
1, A, C:UsersTestDesktopCustFiles, CustA1.jpg
2, A, C:UsersTestDesktopCustFiles, CustA2.xlsx
3, B, C:UsersTestDesktopCustFiles, CustB1.txt
4, C, C:UsersTestDesktopCustFiles, CustC1.jpg
5, C, C:UsersTestDesktopCustFiles, CustC2.jpg.

I would like to show them on a continusous sub form .. I am using image control by setting its control source property but it does not seem to work..Do I need something else for the xlsx and txt files..

View 2 Replies View Related

Button / Image Or Text Box To Access Hyperlink Field

Oct 15, 2013

I have a field in a Table (tblMainFile) named "File Location" which contains a hyperlink for each of the files.I have a continuous form (from a query) which displays information from the tblMainFile table.the form shows a text box (with the hyperlink) which is clickable to take them to the link location.I would like to have a button which says (GET FILE) or a different text box which simply says "Get File" as opposed to the entire hyperlink.

View 6 Replies View Related

Forms :: Popup Image On Rollover On Button Or Label

Feb 24, 2015

I was wondering if there is any way i can popup image on rollover on button or label. if yes, how to do it.

View 2 Replies View Related

Access 2010 - Delete Form Command Button With A Password To Confirm Delete

May 6, 2014

All I am trying to do is insert to have a form with a "Delete Record" button on it. The problem is I don't want anyone to be able to delete a record, I would like someone to have to insert a password to confirm the delete.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved