I have a form with an unbound textbox. I want to be able to enter a sequence of digits and spaces (e.g., 02 950 4187); however, when I paste this into the box, I always have to delete the two spaces until the number is 9 digits long. Then it will accept the number and go look for the prize. How do I get the textbox to accept the number I paste in?
View RepliesCode:
Private Sub Combo1309_AfterUpdate()
If Me.Combo1309.Value = "Yes" Then
Me.Text1307 = Environ("UserName")
Me.Patient_Gender.BackColor = vbYellow
ElseIf Me.Combo1309.Value = "No" Then
Me.Text1307 = Environ("UserName")
Me.Patient_Gender.BackColor = vbRed
End If
End Sub
I have the above code in an unbound textbox and it functions correctly. Expect, the value Yes/No appears in every record in that textbox,So, if in record 1 the value of that textbox 1309 is Yes in record 2,3,4 the value of that textbox 1309 is set to Yes. How do I make it blank until the user selects the proper choice.
I have a textbox called Odours, there are four buttons below the textbox btn_Cadaver, btn_Drugs, btn_Explosives and btn_Money.
On licking one of the buttons a value will be put in he textbox i.e. pressing the btn_Cadaver will put the value "Cadaver ()" in the textbox.
The reason I want this is that all of the entries must begin with either Cadaver, Drugs, Explosives or Money. The brackets are there to allow the user to put some free text between the brackets.
I have some code to set the cursor (on click) between the brackets
Code:
Me.Breed.SelStart = 9
I want to prevent the user from typing anywhere in the textbox except between the brackets.
I try to develop an access 2010 Forms that contains 1 or 2 charts. So my problem is, in my form I have 1 combobox and 5 unbound textbox. Inside Event OnChange combobox, there is function DCount that will setup value to the 5 unbound textbox. Until this point, the 5 unbound textbox is have its value.
Now I would like to create a chart that value are based on the 5 unbound text. How can i accomplish this ? i see in many articles, a chart row source is link to a cross tab query.
I have a form with a textbox which when users enter a unique number(barcode) I want to run a query which pics up the barcode number, checks against the product id and fills the subform with the name of the product and price.
The basic details of the product table is like:
product id (Autonumber)
prdoduct name (text)
price
barcodeId (number)
The subform where i want the result to go is the order details fields product name and price.
I am trying to figure out how to do this but my mind keeps going blank, its been a long while since i used ms access.
I'm using a very simple unbound textbox on a very simple form, with the following Expression to find me data in a query and sum the last 30 days, based on a combo-box on my form...
Only thing is, it's showing me only the data from the last 30 days...regardless of the value in the combo.
=DSum("Credit","qryIncVsExp","TransDate>=#" & Date()-30 & "#" And "AccountID_FK="""&[cboaccount].[column](1)&"")
I'm sure it's something to do with the number of "'s I have, but I'm probably more than likely ever so wrong.
I am populating a table using combo boxes in a continuous form. The box box alone works fine without any issue of repeated data. But as you know obviously the combo box only populates data in a single column of the table, in which case mine is the LASTNAME; so now I am attempting to populate a unbound textbox with the FIRSTNAME side-by-side with the combo box for the same record.
In the After Update event of the cboLASTNAME:
Code:
Me.txtFIRSTNAME = Me.cboLASTNAME.Column(3)
However, after updating the the combo the textbox data is repeated.
Is there a possible solution to this?
I am trying to hide the first 6 digits in a textbox and only show the last for digits in a text box.
So far I a putting my code in the Format Format section in Property Sheet of a form. Its not seeming to work.
Code:
Left([Card Number],Len([Card Number])-6)
How to update unbound textbox on main form from unbound textbox in subform afterupdate.
that is when amount paid is updated it automatically updates total paid, balance etc.
I have a field in a table where it is a lookup is a combo box. So this makes the data type of the field a number when in reality it is a text. When I have this field show in a list box it shows the number instead of the text.
View 5 Replies View RelatedHi: There are two textboxs in my main form. One is bound and another is unbound. There is no entry in the unbound textbox as values come into automatically after entering some information in the subform. My question is how to i pass values from unbound textbox to bound textbox every time when the value change in unbound textbox i need to change the value in the bound textbox. When the form load there is already value in the bound textbox which i want to override based on the values from the unbound textbox.
Thank You.
have a query with a field that contains numbers with 3,4,and 5 digits. I want to format it so it displays all as 5 digits by adding 0s to the front of the number. EX:
324
4856
45634
change to:
00324
-4856
45634
Help please. Dont want to do it in VBA either. I would rather build it as an expression field or something.
dear frnd,
i have a access program for printing cheque. i want to use a text box which automaticaly convert number ito digits from user input text box.
I need a field to permit only numbers. Upon selecting number for the data type I select Long Integer for a longer number... But it only allows 9 digits.. I need it to allow to enter in longer numbers... Any help?
Thank you very much in avdance
I'm just to work with Fox Pro, and I am therefore puzzled with how to define the exact number of digits in a field in a table in Access. If I need 9 digits + 2 decimals in a number filed, how do I define that in design view?
Also, I need to know how to export a table into a text file, with a format without any spaces, and each record is divided with a new line. This an old IBM text format file.
Thanks, Torsan
Hi there
Im working on an update query to add 2 zeros to the front of a field where it is less than 8 digits long. I'm not sure how to go about this, can anyone help me out?
Cheers
Hi guys,
I have a text box, which requires a 8-digit number entry. I have wrote the code to check that the length is 8 and if it isn't a label will turn visible next to the field telling the user entry must be 8 digits.
This works for when i enter a number less than 8-digits but when i input a number with more digits as it does not fit into the text box it turns it to a scientific format value and when the code runs it shows the length is actually 8! And therefore the entry is valid!
I.e. when i input 123456789 the text box shows 1.23E+08 which is 8 charecters!
I dont want any error messages to pop up as i handle them by code and use labels to show the error message next to the problem field and i would like to keep this consistent. Is there any way i can do this by a function or a property in the table or form?
I appreciate any help/advice
cheers
hello,
simple problem. how would i grab just the last six digits of a social security number?
example: 123-45-6789 to 456789
I'm guessing that I should use the Format function, but I'm not quite sure how to write it. Thanks!
G
I have a report to print that only shows the last 4 digits of the Social Security field. How can I do so for the entire list of social security #'s.
Thanks in advance.:cool:
I want to know if there's a way to sort alphanumeric fields where the number of digits aren't always the same.
Example: I have the following: 2a, 10a, 3a.
Currently, it sorts: 10a, 2a, 3a.
Is there a way to get it to sort 2a, 3a, 10a without adding a 0 before 2a and 3a?
The field SECL DDI has the users phone number unfortunately over time these have been entered in different formats so there are 5 digits, 6 digits, 7 digits etc...Can I run a query that counts the number of digits in each filed and then tell me how many of each exist
Ie
4 digits 3412
5 digits 5000
make sum of digits from a string, something like if i have txt1 = "1234567890" to make txt2 = "1+2+3+4+ ...+0".
View 13 Replies View RelatedI have a date textbox (Week_Ending) and number textbox (Staff_ID) in a form (frmHourEnter), when both have values I open another form (frmStaffReport) with textboxes (txtDateStart and cmbStaff).
How do I open the second form with the values of the first form pre-entered?
I have a form that calls up an employee that also lists their hire date. I have an unbound text box that calculates the years of service by DateDiff(). It works for the first record but sticks for all the subsequent records. I've tried an afterUpdate or Change on the bound Hire_Date text box that is Me.txtYearsOfService = DateDiff("yyyy",Me.Hire_Date,Now) but it still sticks to the first record.
I'm sure this is basic but can't see the obvious. Please relieve the pain.
Thanks
Hi all,
I am experiencing problems trying to put together what I thought was a simple form that would
allow users to search for data from a field on one table and display the results in a data grid style from the query I have created. However the query is'nt working and I am sure it is because of the way I have coded the query to read from the form's textbox. The SQL code is below.
SELECT tblFiles.Vault, tblFiles.Wlt, tblFiles.CD, tblFiles.Media, tblFiles.ProjectNo, tblFiles.ProjName, tblFiles.FileName, tblFiles.Location, tblFiles.NetLoc, tblFiles.CreDate
FROM tblFiles
WHERE (((tblFiles.FileName)=[forms]![frmArchive].[txtprjname].[value]));
There is a value in that field as 'attachment' and if I type that in the textbox it will find the records that have exactly that string but if I type 'att' there are no results. I tried searching in help for 'Like' since I believe that is the problem with my code but it did not show me an example of how to code that in the query to refer to the object on the form.
the code I have on the button next to the unbound textbox is as follows...
DoCmd.OpenQuery "qryFindPrjFile", acViewNormal, acReadOnly
Can anyone offer me any advice on how to do this?
Regards,
Mitch...
Hi all,
I am experiencing problems trying to put together what I thought was a simple form that would
allow users to search for data from a field on one table and display the results in a data grid style from the query I have created. However the query is'nt working and I am sure it is because of the way I have coded the query to read from the form's textbox. The SQL code is below.
SELECT tblFiles.Vault, tblFiles.Wlt, tblFiles.CD, tblFiles.Media, tblFiles.ProjectNo, tblFiles.ProjName, tblFiles.FileName, tblFiles.Location, tblFiles.NetLoc, tblFiles.CreDate
FROM tblFiles
WHERE (((tblFiles.FileName)=[forms]![frmArchive].[txtprjname].[value]));
There is a value in that field as 'attachment' and if I type that in the textbox it will find the records that have exactly that string but if I type 'att' there are no results. I tried searching in help for 'Like' since I believe that is the problem with my code but it did not show me an example of how to code that in the query to refer to the object on the form.
the code I have on the button next to the unbound textbox is as follows...
DoCmd.OpenQuery "qryFindPrjFile", acViewNormal, acReadOnly
Can anyone offer me any advice on how to do this?
Regards,
Mitch...