How Can I Tell If FE Is Corrupted? Error With JET Utility.

Apr 12, 2006

The FE of my database has been crashing during the last week and there have been a few other problems. I got errors saying that the BE was an 'unrecognised format'. I remember getting a 'not a valid bookmark' error also.

Another odd thing that was happening - when I put breakpoints in my code it was not breaking and stepping through it. It was like they weren't there. I realise now that editing the code while it was in break mode may have caused problems.

I didn't realise these issues were signs of corruption (until I started reading up on the subject and searching this forum) so have no idea when it started or what could be corrupt.

I used the compact and repair facility and it seemed to work fine. I can open all the forms and reports. I also decompiled the FE and it hasn't crashed since but I don't know if the problem is completly solved. From what I've read the problem could get much worse if I don't deal with it now.

The reason that I think that there may still be a problem is teh fact that the JEt compact utility will not work. I just get an error saying 'Error compacting database' straight away.

Is there a way to tell if something is corrupt or am I worring unnecessarily?

View Replies


ADVERTISEMENT

Utility.mda

Nov 17, 2007

I have a small problem and think I have found the answer but still would like some info on it. I have a DB that was created in Access XP, One of the bosses upgrades to Office 07 full version, and only has Access 07 on his machine. The DB would not open for him..... I noticed the reference "Missing" to "Utility" Now when I open it on my laptop it's fine.... I have Office 03, Access 03 and Access 07. So I opened an old sample DB of something I found and I got the same reference error.... As it shows the path I found the "Utility.mda" and set the reference. From my searching it sounds like this "Utility.mda" was something on older versions but now is not on Office 07.... So what exactly was the "Utility.mda" what did it do, and why is it now gone???Thanks

View 4 Replies View Related

Utility File

May 1, 2006

Hi,

im trying to fix an access program on a computer for a friend.

I have re-installed the progam and access 2000 runtime perfectly but several errors are stopping the program running. On my computer i have carried out the exact same installation procedure and it works fine. I am therefore thinking that there must be some sort of problem with his computer config.

After quite a bit of trial and error i have found the following.

In the directory of the program there exists a file called 'UTILITY', which says it is a type 'Microsoft Access Add-In'. What exactly could this file be for? It consists of several modules and tables which seem to relevant to the program. On my computer i can go into the utility file and look at the tables ok.

On the problem computer though i can get into the file but when i try to open the tables i get an error that just says 'Unknown'.
Also after a while access then completely crashes and wants to send a report to microsoft.

Also the program has worked perfectly up until lately but no idea why this has changed.

Thanks
Andy

View 1 Replies View Related

Corrupted Mdb

Oct 27, 2005

Hi i have a small issue with a few databases a friend has asked me to help with. let me explain then you will know all that has happened.


4 days ago my friends server crashed .. hard drive failure .. so he thought

he brought the machine to me to see if i can get it fixed .. turns out the raid firemware on his dell server was flakey and needed updating over a year ago which he hasnt done. anyway it crashed same day his tape back up system his tapes he had to wipe clean and start a fresh so he has no backups ... and the raid on his server failed so now he has no data.

i used easy recovery professional to pull all the files back which it has i have repaired all the exel files but when i have tryed to do repaires on the mdb files it just says failed so for the last 2 days i have been hunting the internet for access repair tools and everything i have tryed has failed.
Some of these mdb files are over 1gb in size is there anyway to view the raw data like some other databases allowing me to pull all the tables and back?

when i try to open the files in access it comes up with an error saying unable to open un recognised formate. i have used advanced access repair tool i found on the net and that after spending an hour analizing the file said it failed.

this has been a real evil favour i did for a friend and i wish i never did it but i need to finish it can any one help im not a software guy as you may have noticed im a hardware guy myself so my knowledge on access is very limited.

View 1 Replies View Related

How To Track Utility Bills???

Jan 24, 2007

I'm interested in tracking monthly utility bills....monthly charges, units/volumes, costs per unit and so on, by monthly date. Would I be OK using a single table for my data, since it only involves gas, electric and water each month? How would I chart the data, so I could see trends (i.e., cost per volume, etc.)

Are there any sample projects out there that I might be able to adapt to what I'm interested in?

I'd be most appreciative if anyone has a comment, idea or suggestion. Thanks in advance!!

View 9 Replies View Related

2007 Ribbon Utility....

Jun 20, 2007

Has anyone used this tool for customizing ribbons? http://pschmid.net/index.php
Looks like it might be a time saver.... But no examples actually showing Access.

View 2 Replies View Related

Utility To Search For Tables?

Dec 14, 2005

Hi,

Totally new to access and was wondering if there is a way to search all queries, forms, macros, etc for references to a particular table. For instance, I am adding keys to some existing tables that do not have keys and want to test all the forms where that table is used.

Its a big database and going through form by form will take a long time.

Thanks,

sal

View 2 Replies View Related

Corrupted Data

Oct 23, 2007

Hello,

I'm relatively new at Access and not quite sure where to post this problem. Anyway, I have a complaint database with multi-users. Twice now, I've had the data in two of my records change to what looks like a foreign language. I'm wondering if this has happened when a user tries to filter records within the database. Has anyone had similar problems such as this? If so, is there anyway to correct the text, or to prevent this from reoccuring?

Thanks!

View 3 Replies View Related

Corrupted Database?

Feb 5, 2008

Hi,

I have just got back from leave and found out my contacts db has corrupted whilst i have been away. Unfortunately during this time the automated backup has copied the corrupted file so that is now useless as well.

When i try to open the file it says 'Error cannot find object 'Database'. I have tried doing a compact and repair on it but get the same message. Is there anyway i can get this back?

Thanks

View 2 Replies View Related

Help!! Database Corrupted!!!

Aug 13, 2006

Hope you can help guys. Here's what happened.

I saved a form as a different name so that I could work on it. I made some changes to the new saved form then tried to save it to the name of the old form, to overwrite it. It came up with an overwrite warning, i said yes and suddenly the database went crazy and had to shut down.

When I restarted, the form I tried to overwrite was gone from the list, but the one I had worked on was still there, so I thought, "thats ok, I'll just rename it".

Well, it won't let me rename it either, and comes up with error messages all the time now saying that the form that was overwritten no longer exists. What have I done!!!!

View 4 Replies View Related

Question About Auto FE Update Utility

Dec 28, 2006

Hello,

I have added this to my database but dont see how it would be used. I have a shortcut people use to access the database which ties in my workgroup file infomation so that they can open it.

Now when I send the MDE file to people they get the "dont have permission" typical response.

Now if people are goin to use the shortcut to the either my .mdb or .mde then couldnt I just make adjustments to those and then replace the file on the shared network?

Am I missing something or not seeing how this would be useful or needed?

Thanks for any insight.

View 14 Replies View Related

Corrupted Records After Linking Table

Dec 3, 2004

Attempted to link to a table on an SQL Server, which included customer records & various contact dates, after the importing the records became corrupted in that they repeated the initial date over & over e.g.

Customer Date
AB1111 16.11.04
AB1111 16.11.04
AB1111 16.11.04
AB1111 16.11.04

...as opposed to listing same account number but with 4 different contact dates...also when the Access database was opened on a different PC (also Office 2K) the table was displayed correctly?

Has anyone else come accross the same issue, any advice/guidance much appreciated. :rolleyes:

View 1 Replies View Related

Tables :: Corrupted Auto Number

Feb 17, 2015

As part of a larger multi-user system there is a time recording part with a simple table called tblTime with an autonumber field. Today at 11:45 users started reporting receiving a 3022 error. On looking at the table I noticed that if I tried to manually add a record then the ID field number inserted automatically was not the next number in sequence, but one that already existed, hence the error.

View 2 Replies View Related

Modify Bob Larsons FrontEnd BackEnd AutoUpdate Utility

Nov 22, 2007

Hello everyone,

I was looking for a great way to link and relink BackEnd to FrontEnd and I sort of found it.
Bob larson build a great extensive tool to autoupdate backend en master frontend. You can find his great post here: http://www.access-programmers.co.uk/forums/showthread.php?t=111132&highlight=back+end

Here is my problem or wish is more appropriate.

I just want to relink the backend and if the backend isnt found I want to select it using the filedialog.

Who can help me...
Perhaps you can Bob???

I included the file

I realy hope that you can help me guys.

View 1 Replies View Related

JetComp Won't Work - Have Corrupted Table That I Cannot Delete

Aug 29, 2005

Hi.
Have a multiuser front and back end database.
Apparently 2 records (without memo fields) got corrupted. I could not delete the records so I tried compact and reair without being able to do either. I tried JetComp but it said it could not fix it. I cannot even delete the offending table.

Help! I have major reports due.

Russ

View 2 Replies View Related

Tables :: Recover Data From Corrupted Table?

Dec 5, 2012

recovering data from a corrupted database. I have a huge table with almost 600K rows and 140 columns. I went to Database Tools, Visual Basic, Tools, References. There was a broken utility file. I removed it by unchecking the box and closed and returned to my db. I did make table query from the corrupted table and then imported it into a fresh db.... but still I cannot run an append or update query successfully.

View 1 Replies View Related

Microsoft JET Database Engine Error '80004005' Unspecified Error

Jan 28, 2004

Hi,

Im new to asp and access and have been having this problem for serveral weeks.

Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:

Microsoft JET Database Engine error '80004005'

Unspecified error

/admin/submitlogin.asp, line 8

I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,

Patrick

View 3 Replies View Related

General :: Disk Or Network Error With Error Code 3043

Jul 13, 2012

How I can get rid of Disk or network error with error code 3043? What this error indicates.

View 4 Replies View Related

Simple Error Trapping By Error Code

Dec 6, 2005

hi all

i have the following peice of code ...


Private Sub NextApplication_Click()
On Error GoTo Err_NextApplication_Click
DoCmd.GoToRecord , , acNext

Exit_NextApplication_Click:
Exit Sub

Err_NextApplication_Click:
If Err.Number = 2105 Then
MsgBox "Cannot navigate to the next record. This is the last record."
Else
MsgBox Err.Description
End If

Resume Exit_NextApplication_Click

End Sub


but even when this error occurs nothing is being properly handled the way i specified - any ideas ?

View 3 Replies View Related

Reserved Error (-1517); There Is No Message For This Error.

Mar 31, 2006

Does anybody know what this error message refers to?

"Reserved Error (-1517); there is no message for this error."

It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.

the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)

The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.

If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.


-Thanks, Sean

View 10 Replies View Related

Error 3341 Or Error 3022; Do Or Don't, I'm Damned.

Aug 3, 2006

Okay, I'm kind of stumped here.I have a subform that has a button that sends a user to a "sibling" subform on another tab page, pass some information to ensure they are adding more details to the same records rather than creating two separate record.First time I programmed it, I got an error 3022 (keys cannot have duplicate values). I checked the query of the sibling subform and saw that the ID is from the one side table. I changed it so many table's foreign key is used. Second try, I got an error 3341 (there isn't a matching key in one side table).After some thinking, it also occured to me that I had set the query this way to allow addition of new record which wouldn't be possible if I had the query pulling the many side key, not the one side key.How do I get the subform to accept the ID that is being passed and create a new record using that ID?:confused:

View 5 Replies View Related

Modules & VBA :: Why On Error Is Skipping Next Error In Sequence

Sep 1, 2014

Code:

Private Sub Consolidate_Click()
Dim temp As Variant
Excel.Application.Visible = True
temp = Dir(CurrentProject.Path & "Inputs")
Do While temp <> vbNullString

[Code] ....

From the second iteration its not picking the error.

View 5 Replies View Related

Error Handling - Enough To Put In On Error Event

Sep 24, 2005

Every form has an on error property.

Is it enough for error handling to code the on error property for each form?
With enough I mean error handling which lets you resume the program.

Ontherwise I have to code (or call a procedure) for each coded event which i wouldn't prefer

For instance now I'm putting error handling in each event but would consider it more efficient if it can be placed once in each form
Private Sub cmdReport_Click()
On Error GoTo Err_cmdReport_Click

Dim stDocName As String

stDocName = "rptOfme"
DoCmd.OpenReport stDocName, acPreview

Exit_cmdReport_Click:
Exit Sub

Err_cmdReport_Click:
MsgBox Err.Description
Resume Exit_cmdReport_Click

End Sub

View 3 Replies View Related

Error Message With No Error Number

Feb 1, 2006

Hello All,

I have been developing my database all one seems to be well exept for an error message which is attched.

If anybody can help me trap this error or offer some advice i would be greatfull.

Alastair

View 6 Replies View Related

SQL ERROR - Runtime Error 3061 -

Aug 5, 2005

SQL Issue ...

ERROR: Runtime error 3061 - Too few parameters. Expected 1.

------------------------------------------------------------------------

Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " '
* ROLL * & ' " & " ) AND .... )

sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"

ANY HELP WOULD BE APPRECIATED ...

Cheers,
QTNM

View 14 Replies View Related

(Error 3022)The Changes You.... Error In Subform

Dec 18, 2006

hi guys i was wondering if you can help me this is my code: i have a main form with this code, this form contains a subform linked by the All_PricingID

Set rst = CurrentDb.OpenRecordset("tblAll_Pricing") 'main table
' adding data to the table
rst.AddNew
' Main table
rst!All_PricingID = Me.txtPricingID 'Main table pk
rst!MainContract_ID = Me.cmbMainContract 'combo box in parent form
rst!ItemNumber = Me.txtItem 'Main form text
rst.Update

'sub Table
Set rst2 = CurrentDb.OpenRecordset("tblPricing") 'sub table
For varItem = 0 To Me.lstsubContracts.ListCount - 1 'this is a list in the main form
'--- loop through all the items in the list box and create a new row in the subform for each subcontract in the listbox lstSubcontracts.
rst2.AddNew
rst2!ID = Me.All_PricingID 'sub table foreign key
rst2!SubContractID = Me.lstsubContracts.Column(0, varItem) 'sub table
rst2.Update
Next varItem
'--- close the tables
rst.Close
rst2.Close
Set rst = Nothing
Set rst2 = Nothing


the subform appears correctly with the rows i wanted added but i need the user to be able to edit a column in the subform for the rows just created (my form is on datasheet view). but everytime i move to cursor into the subform, i can't even scroll up and down.

i keep getting an error that says :

The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. (Error 3022)


but when i check my tables tblAll_Pricing and tblPricing , everything is inserted correctly according to my recorset above, do you know why this is happening? and why i am not able to edit my subform. my subform allowsedits and additions.


help!!

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved