Converting .mdf To .mdb
Dec 2, 2004hi guys!
i just wanted to find out how do i convert an mdf to access,
please help!
Kind Regards
phindile
ADVERTISEMENT
Converting To An Exe
Jun 29, 2005I have created a database but I would like it to be an exe. is this possible? if so, how???
I would like to lock the design and the code for the database. I will be holding about 2000 entries, will this be a problem?
thanks
Converting .MDB To .EXE
Jul 11, 2005Hello Everyone,
First of all thanks alot for investing your valuable time in reading my query, I wonder if someone can kindly educate me on how to convert an access database.mdb file to an executable .exe file. Also is there a way to create an installation package to install the database to many Computers.
Thanks Again
Warm Regards,
Darno
Converting From XP To 2003
Dec 3, 2005I have a dbase that was created in access XP. We are in the process of upgrading to office 2003. For the most part the database works fine. However, I have 1 form that has a few fields that have conditional formatting
on them and when the form opens those fields flash very fast continuously all most like the tab key is being held down. No matter what I do I can't get it to stop. Has anyone seen anything like this and how do I make it stop?
jon
Error Converting To MDE.
Jun 1, 2006This is the error i get...
This error is usually associated with compiling a large database into an MDE file.* Due to the method used to compile the database, a considerable number of TableID references are created for each table.* The Microsoft Jet database engine version 4.0 can only create a maximum of 2048 open TableIDs at one time.* Exporting a database as an MDE potentially can exceed this limit if the database has a large number of objects (table, macro, form, report, etc).
There is no accurate method to estimate the number of TableIDs the Jet database engine uses during the process of compiling a database as an MDE.* However, each VBA module and each form uses one TableID, as a result, if the database has 500 forms, and each form's HasModule property is set to Yes, as many as 1,000 TableIDs are used.
More information about this error message online.
My database is by no means big, is there any other way i can convert from mdb to mde?
Thanks
Den
Converting Format
Sep 1, 2006Hi All
A simple problem no doubt!
I am trying to convert my Works database into an Access dB (which I have just bought). I cannot find any help on this anywhere?
Any help will be much appreciated
Thanks
Paul
Converting Backwards?
Jan 2, 2007Hi.
For years several agencies have used a database written and maintained in Access 97.
One adminstartor has both 97 and 200 on his computer and no problem. Until now, that is.
When I try copying a revised front end, and opening it, I get 'unrecogized database format' message.
My hunch i sthat said administartor accidentally opned the basck end with 2000 and converted it.
So, can the back end be unconveted/reverted back to 97?
Any other suggestions?
Russ
Workgroups And Converting 97 To 2k+
May 30, 2007I have a problem converting access 97 mdb files into access 2000. There are multiple access databases that use a mdw workgroup on a network drive. I do have the ability to log on as an admin. Access 2000 is not letting me convert the files to the new format (telling me I don't have permission). The databases do have lots of forms, queries, macros and such.
Would the easiest method be to remove the userlevel security or is it possible to get around that? If I were to remove the user level security is it as simple as loggin in as admin, deleting all user account, granting all permissions to users and admin and removing the password?
Any help is much appreciated.
Converting To Standalone
Jun 17, 2007Hi All
I am currently compiling an Access DB to manage my work in progress, Payments due etc.
The DB is starting to work well and have requests from fellow contractors to purchase a copy (there are over 400 subcontractors in the group), with this in mind I have decided that when I complete the DB I will take it to a proffessional programmer and have it converted to a fully standalone programm.
My question: Is there a programm format that is preferable or would C# be the best option or is there a product out there that I could purchase and use.
Thanks in Advance
GeoffK
Converting 97 To 2003
Aug 29, 2007I've read alot on this, Tony Toews, Allen Browne and our own experts have put out lots of info.
I've started converting my dog straying database and have a weird result. This is split into front and back ends.
Result:
My PC Win XP Access 97 and 2003 works perfectly
PC 2 Win 2K Aceess 2003 ditto
PC 3 Win XP Access 97 and 2003
setup looks identical to mine no missing refeneces etc - No images will display in the image frame on the main form.
I have no hair left. Any ideas??
Converting A TXT To ACCESS
Sep 7, 2007Hello,
I'm trying to get a way to creat a database of my phone messages (SMS).
I have them on a .txt file and I would like to create on ACCESS (or other program) the fields "Date:" "From:" "Message:", etc.
So, everytime I introduce a day, all sms sended on that day appears, or, when I introduce a Name, every message from that person, appear.
Is that possible? Of course that I want to convert it, not introduce one bye one because I have around 2000 messages...
Thank you very much
This is a example of the .txt file I have:
================================================== =========
Message type: SMS
From: 0: Maria
Date: quinta-feira 03 Maio 2007 15:33
-----------------------------------------------------------
Hum que bom então. Tou com a minha amiga na praça da república. Vais ficar aí?
================================================== =========
================================================== =========
Message type: SMS
From: Figueiredo 0: Maria
Date: quinta-feira 03 Maio 2007 14:59
-----------------------------------------------------------
Tas em casa?a mariana foi aí?
================================================== =========
================================================== =========
Message type: SMS
From: Figueiredo 0: Maria
Date: quinta-feira 03 Maio 2007 14:52
-----------------------------------------------------------
Já tá?
================================================== =========
================================================== =========
Message type: SMS
From: 0: Maria
Date: quinta-feira 03 Maio 2007 12:47
-----------------------------------------------------------
Desce tou no carro em frente ao mc donalds..
================================================== =========
Converting Minutes
Oct 12, 2004I have time sheets from the past I need to enter but have found that some years the time punch minutes are given as if an hour equals 100 minutes not 60. Other years the minutes are given correctly. How do I format this field so that if I type 3.75 it will convert to 3.45 hours? Will I have to add another field to enter this and then convert to my field where hours and minutes are correctly entered? :confused:
View 2 Replies View RelatedConverting -1 And 0 Into Y Or N On Select
Jul 13, 2006Hello,
Could someone tell me is it possible to convert a particular column from 0/-1 to show y/n instead? Its just a simple select statement I'm doing and I need a Y or N instead or numeric!
Thanks,
R:)
Converting Iif To Case
Oct 10, 2006Hi here is the original code
MAX(IIf([Book]='C',[Score]," ")) AS CScore,
Max(IIf([Book]='C',[PercentileScore]," ")) AS CPercent,
Max(IIf([Book]='C',[PassFail]," ")) AS C,
Max(IIf([Book]='D',[Score]," ")) AS DScore,
Max(IIf([Book]='D',[PercentileScore]," ")) AS DPercent,
Here is what I thought may work, but it seems like there should be an easier way
Case when Max ([Book]) = 'C' then [Score] else null as CScore,
Case when Max([Book]) = 'C' then [PercentileScore] else Null as CPercent,
Case when Max ([Book]) = 'C' then [Passfail] else Null as C,
Case when Max([Book]) = 'D' then [Score] else Null as Dscore,
Case when Max ([book]) = 'D' then [PercentileScore] eslse Null as DPercent,
Thanks
K
Help Converting Time...
Dec 4, 2006I am trying to convert a whole number to a start time w/ no luck. Assuming "0" is 12:00 AM, I have a start minute of "480" which would in essence be 8:00 AM. Can anyone tell me if I can somehow convert this to time in my query? Thanks.
View 3 Replies View RelatedConverting Null Value To $0.00
Mar 3, 2008Hi All,
I have a table that has fields that captures dollar amounts. I have these fields set to a default value of "0".
The tables are updated via a query that imports a csv file. Once the import process has finished, my table has blank values in some of the fields that capture dollar amounts.
If a field populated by the csv file is left blank, I would like for the field to show $0.00.
How would you recommend handling this?
Converting MDB To MDE Gives Error.
Jul 28, 2005When trying to convert my MDB database to and MDE database I get the following error pop-up...
"Microsoft Office Access was unable to create an MDE database"
I am using 2003 and the database is tiny at about 6 tables, 10 forms, 100 controls.
The error message help is useless but I include it here for what its worth...
Quote:
This error is usually associated with compiling a large database into an MDE file.* Due to the method used to compile the database, a considerable number of TableID references are created for each table.* The Microsoft Jet database engine version 4.0 can only create a maximum of 2048 open TableIDs at one time.* Exporting a database as an MDE potentially can exceed this limit if the database has a large number of objects (table, macro, form, report, etc).
There is no accurate method to estimate the number of TableIDs the Jet database engine uses during the process of compiling a database as an MDE.* However, each VBA module and each form uses one TableID, as a result, if the database has 500 forms, and each form's HasModule property is set to Yes, as many as 1,000 TableIDs are used.
More information about this error message online.
End-Quote
Converting # To Autonumber
May 2, 2006I imported data from excel. The PO#'s are a number field and I would like to switch to a autonumber.
Can I get the numbers to continue counting based on my previous entries.
Currently I have PO from 150-2500. I would like the next entry to autonumber to 2501.
Let me know if this can be done. Access says you can't in 2003.
Thanks
Problem Converting MDB To MDE
Oct 3, 2006In access, I have a database stored in a .mdb file. I tried converting to a .mde file through Tools -> Database Utilities -> Make MDE file, but whenever I do, Access freezes. Another .mdb file is created, but no .mde file is there, and when I try to open this mdb file, I get a "file not found" error. I tried rebooting the computer, but no success. Please tell me what's going on?
View 2 Replies View RelatedGeneral :: Converting MDB To MDE
Apr 4, 2013I have a program abc.mdb and abc.mde, I made some changes to the codes in abc.mdb and now I have been trying to convert the access file from abc.mdb to abc.mde so that the users are able to use the updated file. However, whenever I make MDE file. It doesnt work but creates another file called db1.mdb instead.
View 9 Replies View RelatedUpdate Query/Converting
May 9, 2005Dear all,
i have searched /researched and looked at hundreds of posts, and no luck.
Im litlle bit out of my depth, i have posted this before but just got confused.
i have two update querys, the first one identifys if a persons age (by date of birth) is under 16 a check box identifys if this person is "ticked" as junior.
the second update query identifys by (date of birth) if the person is over 16 a check box identifys if this person is "ticked" as senior.
The results are returned into my main query in two columns, these columns return -1 or 0 for junior or senior.
I need to produce a report that returns J or S (Junior or Senior) is there a way of converting these results to one column and converting the -1, 0 to J or S.
Please see attached file.
very lost, still searching for the answer. been on this foe three weeks now.
any help appricated.
Problem Converting From 97 To 2003
Aug 18, 2005trying to convert to 2003 format and I get conversion errors. They are in 2 tables.
1-customers table says -1605:could not find field "description"
2-orders table says -1522: No unique index found for the refrenced field of the primary table.
Can anyone help? I can get in to create new reports & quiries, but if want to add orders to customers it will not let me.
I would appreciate help.
Converting Omniform To Access
Oct 10, 2005Hi, all!
I have been informed by an off-site program of ours (out of state) that they need to convert an Omniform application to Access.
I did an initial search on the web on Omniform but I really don't know anything about it.
Has anyone every converted an Omniform application to Access? Is this something that can be done in an automated way or would the Access db need to be made from scratch?
Thanks!
Paul
Converting Text To Numbers
Jun 14, 2006I wondered if someone could help.
I am using the Val () Function to convert a text field to number within a query which still gives me a text output.
P.S I do not have permissions to change within table as using Access as a front end to SQL via link Tables.
Converting Figures To Words
Jul 6, 2006Dear all,
I am creating a database which has an invoice printing form. In that I would like to have a column for the total amount in words. I have got a sample module from northwind database. According to that 100,000 is "one hundred thousand" but in my country that is pronounced as " 1 Lakh" and for one million it is 10 lakh, for 10 million it is 1 crore like that. Is that possible to change the code in that module to display the words according to our standards? I am attaching the code with this thread. If anybody can show how to do that...I will be thankful to them..
Thanks
Function ConvertCurrencyToEnglish(ByVal MyNumber)
Dim Temp
Dim Dollars, Cents
Dim DecimalPlace, count
ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "
' Convert MyNumber to a string, trimming extra spaces.
MyNumber = Trim(Str(MyNumber))
' Find decimal place.
DecimalPlace = InStr(MyNumber, ".")
' If we find decimal place...
If DecimalPlace > 0 Then
' Convert cents
Temp = Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2)
Cents = ConvertTens(Temp)
' Strip off cents from remainder to convert.
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
count = 1
Do While MyNumber <> ""
' Convert last 3 digits of MyNumber to English dollars.
Temp = ConvertHundreds(Right(MyNumber, 3))
If Temp <> "" Then Dollars = Temp & Place(count) & Dollars
If Len(MyNumber) > 3 Then
' Remove last 3 converted digits from MyNumber.
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
MyNumber = ""
End If
count = count + 1
Loop
' Clean up dollars.
Select Case Dollars
Case ""
Dollars = "No Dollars"
Case "One"
Dollars = "One Dollar"
Case Else
Dollars = Dollars & " Dollars"
End Select
' Clean up cents.
Select Case Cents
Case ""
Cents = " And No Cents"
Case "One"
Cents = " And One Cent"
Case Else
Cents = " And " & Cents & " Cents"
End Select
ConvertCurrencyToEnglish = Dollars & Cents
End Function
Private Function ConvertDigit(ByVal MyDigit)
Select Case Val(MyDigit)
Case 1: ConvertDigit = "One"
Case 2: ConvertDigit = "Two"
Case 3: ConvertDigit = "Three"
Case 4: ConvertDigit = "Four"
Case 5: ConvertDigit = "Five"
Case 6: ConvertDigit = "Six"
Case 7: ConvertDigit = "Seven"
Case 8: ConvertDigit = "Eight"
Case 9: ConvertDigit = "Nine"
Case Else: ConvertDigit = ""
End Select
End Function
Private Function ConvertHundreds(ByVal MyNumber)
Dim result As String
' Exit if there is nothing to convert.
If Val(MyNumber) = 0 Then Exit Function
' Append leading zeros to number.
MyNumber = Right("000" & MyNumber, 3)
' Do we have a hundreds place digit to convert?
If Left(MyNumber, 1) <> "0" Then
result = ConvertDigit(Left(MyNumber, 1)) & " Hundred "
End If
' Do we have a tens place digit to convert?
If Mid(MyNumber, 2, 1) <> "0" Then
result = result & ConvertTens(Mid(MyNumber, 2))
Else
' If not, then convert the ones place digit.
result = result & ConvertDigit(Mid(MyNumber, 3))
End If
ConvertHundreds = Trim(result)
End Function
Private Function ConvertTens(ByVal MyTens)
Dim result As String
' Is value between 10 and 19?
If Val(Left(MyTens, 1)) = 1 Then
Select Case Val(MyTens)
Case 10: result = "Ten"
Case 11: result = "Eleven"
Case 12: result = "Twelve"
Case 13: result = "Thirteen"
Case 14: result = "Fourteen"
Case 15: result = "Fifteen"
Case 16: result = "Sixteen"
Case 17: result = "Seventeen"
Case 18: result = "Eighteen"
Case 19: result = "Nineteen"
Case Else
End Select
Else
' .. otherwise it's between 20 and 99.
Select Case Val(Left(MyTens, 1))
Case 2: result = "Twenty "
Case 3: result = "Thirty "
Case 4: result = "Forty "
Case 5: result = "Fifty "
Case 6: result = "Sixty "
Case 7: result = "Seventy "
Case 8: result = "Eighty "
Case 9: result = "Ninety "
Case Else
End Select
' Convert ones place digit.
result = result & ConvertDigit(Right(MyTens, 1))
End If
ConvertTens = result
End Function
Converting Date Function For Both UK & USA
Dec 15, 2006This function gets the last working day (Mon-Fri Are Deamed Working Days For Invoicing purposes) of a month adds it to a table then gets the next until it has done the Number indecated In "txtMonths", It works with a UK Date Format but not with a USA Date Format.
Is there A Better way of doing this or does anybody have an idear as to how I could correct it for UK and US Date Formats
Y = Year(Me![txtStartDate]) 'Get Added Year
M = Month(Me![txtStartDate]) 'Get Added month To Keep Track Of year Change
D = Weekday(Me![txtStartDate], vbMonday) 'Get Day of week and set to monday
On Error Resume Next
For C = 1 To Me![txtMonths]
DDt = CDate(1 & "/" & M & "/" & Y) 'Set to first of the month
Ld = LastOfMonth(DDt)
Nd = CDate(Ld & "/" & M & "/" & Y)
'StrSch = Ld & "/" & M & "/" & Y
CWd = Weekday(CDate(Ld & "/" & M & "/" & Y), vbMonday)
'Now If the date falls on a sat or sunday move the day back to friday
If CWd > 5 Then
If CWd = 6 Then D = 1
If CWd = 7 Then D = 2
Nd = CDate(Ld & "/" & M & "/" & Y) - D
End If
AddSchedule Nd
'Debug.Print C & " | " & StrSch & " | " & CWd & " | " & Nd & " | " & D
M = M + 1
If M > 12 Then
M = 1 'Only 12 Months in a year
Y = Y + 1 'Gotta be a new year Happy New Year
End If
Next C
Edit: Function used to get the last day of a given month
Function LastOfMonth(InputDate As Date) As Integer
' Return a date that is the last day of the month of the date passed
Dim D As Integer, M As Integer, Y As Integer
If IsNull(InputDate) Then
LastOfMonth = Null
Else
D = Day(InputDate)
M = Month(InputDate)
Y = Year(InputDate)
'find the first day of next month, then back up one day
LastOfMonth = Day(DateAdd("m", 1, DateSerial(Y, M, 1)) - 1)
End If
End Function