Can I Connect To Remote SQL 2005 Server Through SQL Server Management Studio Express?
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express?
I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Can't Connect To SQL 2005 Express With SQL Server Management Studio Express
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View Replies !
Cannot Connect To SQL Server 2005 Express With Management Studio Express
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error: Cannot connect ot MPLIAMSQLEXPRESS Additional Information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server) I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message. Please help.
View Replies !
SQL SERVER 2005 Issue, Cannot Connect Using Management Studio Express
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others Named Pipes Provider, error: 40 - Could not open a connection to SQL Server have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented. when i use osql in command prompt to make a test connection it tells me this [SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. on this forum it says to perform a ping and and an a ping a- to my server which does work. Have been working on this for 3 days and can't figure it out. Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer. I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT! If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-) If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can. Thanks in advance
View Replies !
Error Connecting To Remote Server Using Microsoft SQL Server Management Studio Express
Dear All, I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
View Replies !
Cannot Connect To SQL Server Express Edition Using Its Management Studio
Please, I use tyhe Visual Studion 2005 SQL Server Express Edition Management Studio (SMSE) to create the backend database and trying to set the connectionstring from the web config file, but what I continue to get as an error is that "<computername>/ASPNET" login failed for that user, cannot login to the Management Studio. This is my expression from the web config file <connectionStrings><clear /><add name="LocalSqlServer" connectionString="Data Source=.SQLEXPRESS; Database=<dbname>;User Instance=true; Integrated Security=true" providerName="System.Data.SqlClient" /> </connectionStrings> Is there anything I do wrong? Please, I need to solve this and it's urgent.Thanks Kayode Banjo Programmer
View Replies !
Cannot Connect To Report Server From Management Studio Express
hello there, I appreciate any help on the following issue: When I want to connect to a local report server on as shown in the "Reporting Services Tools" tutorial (http://msdn2.microsoft.com/en-au/library/aa337424.aspx), the SSMSE does not show the option "Reporting Services" in the "Server type" drop down list in the "Connect to server" dialog. The tutorial says "In the Server type list, select Reporting Services. If Reporting Services is not on the list, it is not installed." This must be wrong as the SSCM clearly shows an installed and running "SQL Server Reporting Service (...)". Also if i call the webinterface (http://localhost/reports/) a page loads that says "SQL Server Reporting Services Home" with some options. And here something is not correct too. The "contents" tab of the report manager says "There are no items in Home." I started to work on some basic tutorials using the sql server business development studio, and everything works fine. I can create reports, which derive data from the AdventureWorks db properly. Can anyone tell me the adequate steps to fix the SSMSE connection problem and the webinterface view problem? Here are some additional informations: I use WinXP SP2, which makes the IIS version 5.1 SQL server is 2005 express with advanced features and i installed the management toolkit, and the AdventureWorks db. Installation history is as follows: .NET framework 2.0 + VS2005 professional edition was installed 1. installed ss2005express+advanced features, on a named instance. worked fine. I did not install the SSMSE at this point, as i knew it is included in the toolkit too. 2. configured the reporting services through the "reporting services configuration" tool. worked fine. 3. installed the management tool kit. worked fine. 4. installed the AdventureWorks db. installed, but was not attached automaticaly to the database engine. 5. attached the AdventureWorks db to the database engine manually. worked fine, can be viewed and accessed properly. So there I am. I have no clue what went wrong. A last hint that makes me think is this: In the SSCM the sql server an the sql server reporting services have different instance ids (MSSQL.1 and MSSQL.2 respectively). Thanks in advance for your solutions and hints, that is - for your time :-) art
View Replies !
Cannot Connect To SQL Server With SQL Server Management Studio Express
I recently installed SQL Server Management Studio Express, and used it to connect remotely to SQL Server 2005 Express. The first connect worked fine. It was suggested to me to update ODBC drivers to connect to the server using Microsoft Access. In doing so, I found what I thought were Studio Express updates and tried to install them. From then on, I could no longer access the server. The error was a nebulous one that indicated that is could not find the server. I verified that the the server was set up correctly by installing Studio Express on another machine, and it connected fine. I uninstalled and reinstalled. When I ran it, I did not get the "first time use" routine, and still could not connect. I reinstalled MDAC with my Windows XP sp2 disk and reinstalling Studio Express, and still could not connect. I started a thread - http://forums.microsoft.com/msdn/ShowPost.aspx?postid=2557611&siteid=1 - on SQL Server Express foram, and they verified that the server was set up correctly. They suggested that the client network protocol stack on your computer is broken. They suggested I post here to seek help in fixing it. Any help would be much appreciated. Steve Colino
View Replies !
Cannot Connect Remotely To SQLExpress Via SQL Server Management Studio Express
Hi all, I'm having a little trouble connecting to a SQLExpress instance on a remote domain using SQL Server Management Studio Express.I've read that by default the program is set up locally only, so have edited the Surface Area Configuration. It only gives me the option to edit 'Services and Connections' on the localhost, but have edited the Remote Connections to use TCP/IP and Named Pipes. In the Management Studio, I enter the server name, and login credentials. On the Connection Properties tab I changed the network protocol to TCP/IP though everytime I attempt to connect I get the following error message: Any help would be greatly appreciated. Rich
View Replies !
SQL Server Management Studio 2005 Can't Connect
New server - Windows 2003 with latest patches (always up to date) Symantec Antivirus Coporate Edition 10.1 SQL 2005 Workgroup Edition If I run SQL Server Management Studio, it connects fine to the server. Then attach a datafile for my application which is installed on the server. I can run app and open database. All works fine. Then if I try to run SQL Server Management Studio again it can't connect: TITLE: Connect to Server ------------------------------ Cannot connect to HACSRV03. ------------------------------ ADDITIONAL INFORMATION: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) (Microsoft SQL Server, Error: 87) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=87&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ This server is not a production server, as only just installing - like it works fine and then just fails without warning. Help!!!
View Replies !
SQL Server Management Studio Cannot Connect To Local Instance Of SQL Server 2005 SP2
Hello, I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good. I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in. First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error: "An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)" However, I went in to see what other services I could connect to, and here's the results: Analysis Services : OK! Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)" SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider) Integration Services : OK! I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either. I even turned off my windows firewall and still no luck connecting to my own. So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong. Any ideas? Thanks!
View Replies !
Can Not Connect To Report Server From SQL SERVER 2005 Management Studio
Hi All, I have a brand new install of sql server 2005 on brand new WINDOWS SERVER2003 with latest versions. Every thing works fine excepting I get a 404 when I connect to report server from management studio.. I am even able to publish reports and all the url://localhost/reportserver url://localhost/reports url://localhost/reportserver/reportbuilder/reportbuilder.application all work fine on local machine and with in the network behind the fire wall. But when I try to connect to report server using management studio on the local server or remote server, I get the following error. " TITLE: Microsoft SQL Server Management Studio ------------------------------ The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ ADDITIONAL INFORMATION: The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) " More techinal details "=================================== Cannot connect to xxxxxxxxxxxx. =================================== The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.MissingEndpointException.ThrowIfEndpointMissing(WebException e) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() =================================== The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() " Any help would be greatly appreciated. Bob
View Replies !
Can Not Connect To Report Server From SQL SERVER 2005 Management Studio
Does anybody knows how to resolve this? TITLE: Connect to Server ------------------------------ Cannot connect to ServerName. ------------------------------ ADDITIONAL INFORMATION: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ It was my reporting services can not be accessed using web based. There was an error message "Service Unaivailable" Then i found out that the Reporting Services under the Application Pool (IIS 6.0) was not running. Then i recreate application domains, run the Reporting Services, restart the server. and when i try to connect using Management Studio, the error message i got was the above message. When i try to connect using web, the error i got is : HTTP Error 404 - File or directory not found. Internet Information Services (IIS) Help!!!
View Replies !
Microsoft SQL Server 2005 Management Studio - Opening SQL-File From Explorer Does Not Connect Automaticly To Server/database
hello, I have a question about opening files in the Microsoft SQL Server 2005 Management Studio. In the old Query Analyzer from SQL 2000 I can open SQL Files via drag & drop (from explorer to QA) or open it with a double click in the explorer. Then the Files opened, if I had actual a connection to a server / database (QA is stared with one file and has a connection to Server/Datebase), with this connection. Now in Microsoft SQL Server 2005 Management Studio I'll be asked everytime for Server and have to get the database from the database list - it does not connect automaticly to server/database, that is actual connected (I have opened a file with the connection and a connected database in the object explorer). Someone do not have this problem - but we found no option to set it up. Any ideas? thanks & best regards, Christian Kiedels
View Replies !
SQL Server 2005 Express Edition With SQL Server Management Studio Express (SSMSE)
Hi all, I have installed SQL server 2005 express edition with SQL server Management studio express (SSMSE). I have installed also SQLce and I would know how I can manage sql compact edition databases (.ldf) with sql SSMSE, if it is possible! I would be grateful if you could explain it trought a detailed guide (I am a beginner user of sql server tools) or trought a link to useful sites. I'm Looking forward for your reply and still trying... Alessandro
View Replies !
How To Configure SQL Server Management Studio Express To Allow Doing Non-User-Instance/ADO.NET 2.0 From VB 2005 Express?
Hi all, For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only? Please help and tell me what options I should choose in (1) and (2). Thanks in advance, Scott Chang
View Replies !
Restoring A Sql 2000 Db In Sql 2005 Express Db With Sql Server Management Studio Express
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server When I try to do it I recive the following message: ____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476 ------------------------------ Program Location: in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________ What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
View Replies !
SQL Server Management Studio Express 2005 Can't See SQL Server Compact
Hi, I am very new to SQL Compact. I am trying to create one database which can work on the desktop application and also on a pda application. I want to create the database but I am unable to start without Management Studio. Can you guide me to the right tools so that I can create database, view it and manage it use something like Management Studio Express. Also one more question is if my database needs to be at both places on the desktop and on pda how can i synchronise them. PDA will take using c# application data from RFID scans and then i need to sync that database on the desktop so that reports and other info can be generated from the desktop c# application. How to do this? Please can you guide me to any webcasts or labs so i can clarify my doubts about the design. Regards Trushar
View Replies !
SQL Server 2005 Management Studio Express
I am trying to install SQL Server Management Studio Express(SSMSE) on Windows XP SP2. But installtion does not get completed. It goes unto last step in the installation and then rollback itself. At the lat screen it displayes the message that "SQL Server Management Studio Express installation could not be completed as it was intreupted". Though I did not do any thing? I tried at least 20 times but it ends up here. I followed all the steps as defined in SQL Server Express setup on Microsoft site? Any help would be appreciated. ADK
View Replies !
SQL Server 2005 Express Management Studio
Hello, I have installed SQL 2005 Express Management Studio several times and It fails to completely install. I get a message that SQL Server Express 2005 x84 did not install properly. I tried to uninstall it and reinstall it but I get the same problem. My Visual Web 2005 Express Edition and Visual Basic 2005 Express gives an error when I try to add a new database. The error is: "Failed to generate instance of SQL server due to a failure copying database files. The connection will be closed. Does anyone know what I can do to resolve this? My computer system meets the hardware requirements. Sincerely, Pam
View Replies !
Bug With SQL Server 2005 Management Studio Express
Every time I try to remove 'condensed type' from the custom table view (working in database diagrams) the MSE crashes on me, as soon as I push the < button to remove it from the list of columns. Is there a forum or place to post such a bug, or someone to send full details to? When it dies, it doesn't give me an option to send the information to MS. Cheers, -jc
View Replies !
Northwind Database In SQL Server Management Studio Express Is Lost Or Used/processed By VB 2005 Express:How To Locate/return It
Hi all, In the last one and half years, I used the Northwind Database in SQL Server Management Studio Express (SSMSE) to learn the programming of SqlConnections, Data sources, Database Exploere, ADO.NET 2.0, etc. via VB 2005 Express. The Northwind Database in my SSMSE got lost very often, but I was not aware of it. How can I know where the Northwind Database is used or processed by my VB 2005 Express projects that were the examples of some tutorial books or my trial projects? How can I release the Northwind Database back to my SSMSE from the VB 2005 Express projects? Please help and advise. Thanks in advance, Scott Chang
View Replies !
Can SQL Express Db Be Opened With SQL Server 2005 Management Studio?
I'm trying to open a SQL Express database (MDF) with SQL Server 2005 management Studio. Is that possible? I'm getting the following error: The specified file is either not a SQL Server Compact Edition file or is corrupt. It opens fine in Visual Studio 2005. Also, is it possible to run a script in Visual Studio 2005? If so, how? Thanks, Alex
View Replies !
SQL Server 2005 Management Studio Express Not Logging In
Hello,I've installed SQL Server Managment Studio Express 2005 in my laptop and I already have Visual Studio 2005 Express in my system. The problem I m facing is that when I open the SQL Management Studio so it is not logging in using both the Windows Authentication method nor the SQL Authentication, I've Windows XP Professional in my system and I've set No Password on Windows. Please tell me, what's the Login and Password of SQL and secondly what's the solution to this problem.Thanking You.SAAD.
View Replies !
I Can No Longer Connect To My SQL Server Express 2005 From Manager Studio Express
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server. I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah. Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that? Thanks in advance for any input.
View Replies !
How To Connect To Remote SQL Server Database Using SQL Server 2005 Express
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View Replies !
How Do I Import Data In SQL Server Management Studio Express 2005
I am still a bit of a noob with SQL, but, when I use Enterprise Manager with my SQL 2000 server at the office, it is pretty simple to import data from pretty much any data source. I have not been able to locate the Transform facility in the 2005 express software that I downloaded onto my home pc (to help me learn SQL). Did I not install something that I need? or am I just missing what I am looking for? The net question is, how do I import data? Thanks, Tom
View Replies !
Cannot Create New Project In SQL Server Management Studio Express 2005
I installed SQL Server Express 2005 and was able to install the sample databases. I have been working through the on-line tutorial. In Lesson 4 of the tutorial it instructs you to select File, New, Project. However, when I select File, New there is no Project choice listed. Have I failed to install something correctly? Thanks for any assistance.
View Replies !
How To Install Management Studio Express 2005 After VS2008 On Server 2008?
Ok so here's what happened: Installed Server 2008 (64bit) Installed VS2008 (+SQL 2005 Express, by default) I've always installed SQL 2005 Dev (including the SQL Management Studio) before installing VS. Now I am trying to install just the management studio on this machine without success. I tried installing the SQL workstation tools package from the SQL 2005 DVD but the installer detects the tools installed by SQL express (osql, etc.., but no management studio GUI) and the installer refuses to install anything else. I also tried downloading the separate installer for SQL management studio but it doesn't like something also: first thing the installer does is display this mesage: "Installation of this product failed because it is not supported on this operating system For more information on supported configurations, see the product documentation." Any way to do this without having to reinstall VS? Thanks.
View Replies !
SQL Server Management Studio Express 2005 Suddenly Stops Working?
Hello, I am using SQL Server Express 2005 with VS2005. Initially, I have installed SQL Server Express 2005 along with SQL Server Management Studio Express, and then as and when Service packs released I have installed all of them. My current version is SQL Server 2005 Express SP2 and SP2 Update. I used this for about 15 days, then suddenly SQL Server Management Studio Stopped working! without any reason. When I try to run SSMSEE (Sql Server Management Studio Express Edition), hard disk light flickers for a while and then nothing. To rectify this problem, I tried to repair the installation of SSMSEE through Add/Remove program, it went off successfully and now, SSMSEE ran perfectly, BUT, as soon as I restarted the computer and when I tried to run SSMSEE, same problem started again i.e. hard disk light flicker for a while and then nothing! So, I uninstalled SQL Server Express Edition along with all its baggage, and reinstalled the same. Again SSMSEE ran perfectly until I restart the computer. As soon as I restart and try to run the SQL SERVER MANAGEMENT STUDIO, it wont run. One more thing, only SSMSEE stops working , SQL Server is working perfectly. I am at my wits end. I can't understand what to do? Has anybody encountered this probelm? please help me?
View Replies !
Connect SQL Server Express 2005 On A Remote Computer
Hello Everyone, I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password..... I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems..... On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine... The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck..... Can somebody tell me what I'm doing wrong and where.... Thanks, Harsimrat
View Replies !
Local Management Studio Cannot Connect To Remote IS
I am not able to connect my local SQL Server Management Studio to a remote server hosting our Integration Services. I get the infamous "Access Denied". I have walked through Kirk Haselden's howto at: http://www.sqljunkies.com/WebLog/knight_reign/archive/2006/01/05/17769.aspx but the problem persists. Thanks for any help. Keehan
View Replies !
Can't Connect To SQL 2005 Express Edition Via Server Manangment Studio
I have installed SQL 2005 Express Edition on a Windows 2003 Web Edition server. Everything installed correctly, no errors to be found. I also have: Local & Remote Connections using TCP/IP only turne don SQL Browser is running as well. I have tried connecting with the most recent CTP of Microsoft SQL Server Management Studio Express 9.00.1399.00 When trying to connect using the SA account I recieve: 'An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (Provider: Named Pipes Provider, error 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53) After that failed I tried creating a connection locally on the server using ODBC Manager with no luck as well. Microsoft SQL Native Client Version 09.00.1399 Running connectivity tests... Attempting connection [Microsoft][SQL Native Client]TCP Provider: No connection could be made because the target machine actively refused it. [Microsoft][SQL Native Client]Login timeout expired [Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. TESTS FAILED! Any help would be appreciated.
View Replies !
Visual Studio 2005 Unable To Connect To SQL Server Express 2005
Hi, I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message, " Required Component Missing (Dialog box heading) Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251 " I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped. I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed. Thanks, CLN P.S. I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
View Replies !
Server Express, Management Studio Express, Visual Studio Standard, And An ASP.NET Page....
I believe I'm missing something as far as my configuration goes...I'm new to working with SQL server and the databinding I'm trying to do. I have an ASP.NET page that has a radio button list box which I have databound to a database served up by SQL Express I'm having a lot of problems with connections... I was going to enumerate the behavior under each configuration (local only, remote tcp/ip only, remote pipes only, remote both), but I've realized that it is just flaky. Sometimes I can connect to the db with SQL Studio express, sometimes not. Sometimes I can add new tables and edit tables, sometimes not. Sometimes I can create a new connection when trying to databind from within Visual Studio, and sometimes not (sometimes I can't even connect, other times, I can connect initially but when I build a query through the designer it then has problems). Lastly, sometimes the ASP.NET page works correctly and sometimes not. This all seems to be mostly independent of how I configure SQL Server as far as what kinds of connections are allowed. I thought there was a pattern, but as I tested it more rigorously I found there wasn't. What I would like to do is be connected to the same DB with Visual Studio and SQL Studio, edit the DB as I wish, databind to it, and test my ASP.NET page, all without needing to jump through a bunch of hoops (although right now I wouldn't even know what those hoops are...it's just a shot in the dark as to what will work). It's all quite maddening and any help would be appreciated.
View Replies !
Can't Connect To Local Server Instance MSSQLSERVER In SQL Server Management Studio (SQL2005 Sp2/Vista)
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista). SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself. I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works. The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
View Replies !
Can't Connect To SQL Server Management Studio Through VPN
Hi, I am currently looged into the OS (windows xp pro,belongs to domian ABC) as user vdm. I have connected to VPN for a client and would now like to connect to their sql server database using sql server management studio. This sql server installation is on a remote domain called XYZ. When I open sql server studio and select windows authentication, my local domain ABC is selected and greyed out...I would like to change this to XYZ domain...how to achieve this ? thanks in advance
View Replies !
Cannot Connect Via C# But Can Via Server Management Studio
When I try to connect to my sql server 2005, from a asp.net web application (asp.net development server) using... Database=Prism_Project_db; Server=(local); Integrated Security=SSPI; MultipleActiveResultSets=True ... as the connection string, i get: Cannot open database "Prism_Project_db" requested by the login. The login failed. Login failed for user 'R-LAPTOPRyan Holdren'.Yet I can connect using sql server management studio, no problem: Server Type: Database Engine Server: R-Laptop Authentication: Windows Authentication which connects as "R-LAPTOPRyan Holdren". I do not understand how the login could work for one application and not for another. Can anyone help me get this working? Ryan
View Replies !
Visual Studio Database File And SQL Server Management Studio Express Question
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View Replies !
|
TRACKER
