MS SQL Server :: Changing The SQLDatasource SELECT For A Gridview

GridView - SqlDataSource
I have created a GridView that uses a SqlDataSource. When I run the page it does not pull back any data. However when I test the query in the SqlDataSource dialog box it pulls back data.
Here is my GridView and SqlDataSource:
<asp:GridView ID="Results" runat="server" AllowPaging="True" AllowSorting="True"
CellPadding="2" EmptyDataText="No records found." AutoGenerateColumns="False" Width="100%" CssClass="tableResults" PageSize="20" DataSourceID="SqlResults" >
<Columns>
<asp:BoundField DataField="DaCode" HeaderText="Sub-Station" SortExpression="DaCode" >
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="DpInfo" HeaderText="Delivery Point" SortExpression="DpInfo" >
<HeaderStyle HorizontalAlign="Left" CssClass="tdHeaderResults" />
<ItemStyle CssClass="tdResults" />
</asp:BoundField>
<asp:HyperLinkField DataNavigateUrlFields="CuCode,OrderID" DataNavigateUrlFormatString="TCCustDetail.asp?CuCode={0}&OrderID={1}"
DataTextField="OrderID" HeaderText="Order No" SortExpression="OrderID">
<ItemStyle CssClass="tdResults" HorizontalAlign="Center" />
<HeaderStyle CssClass="tdHeaderResults" HorizontalAlign="Center" />
</asp:HyperLinkField>
<asp:BoundField HeaderText="Order Date" SortExpression="OrderDate" DataField="OrderDate" >
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="ReqDeliveryDate" HeaderText="Req Delivery Date" SortExpression="ReqDeliveryDate" >
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="StatusDate" HeaderText="Status Date" SortExpression="StatusDate">
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="ManifestNo" HeaderText="Manifest No" SortExpression="ManifestNo">
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="CustomerPO" HeaderText="P.O. No" SortExpression="CustomerPO">
<ItemStyle HorizontalAlign="Center" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Center" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="Class" HeaderText="Class" SortExpression="Class">
<ItemStyle HorizontalAlign="Left" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Left" CssClass="tdHeaderResults" />
</asp:BoundField>
<asp:BoundField DataField="OrderStatus" HeaderText="Order Status" SortExpression="StatusSort">
<ItemStyle HorizontalAlign="Left" CssClass="tdResults" />
<HeaderStyle HorizontalAlign="Left" CssClass="tdHeaderResults" />
</asp:BoundField>
</Columns>
<HeaderStyle ForeColor="White" HorizontalAlign="Left" />
<AlternatingRowStyle CssClass="tdResultsAltRowColor" />
</asp:GridView>
<asp:SqlDataSource ID="SqlResults" runat="server" ConnectionString="<%$ ConnectionStrings:TransportationConnectionString %>" SelectCommand="GetOrderSummaryResults" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:Parameter DefaultValue="10681" Name="CuCode" Type="String" />
<asp:Parameter DefaultValue="" Name="DaCode" Type="String" />
<asp:Parameter DefaultValue="" Name="DpCode" Type="String" />
<asp:Parameter DefaultValue="" Name="OrderID" Type="String" />
<asp:Parameter DefaultValue="" Name="ManifestNo" Type="String" />
<asp:Parameter DefaultValue="" Name="PONo" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
I can get it to fill with data by manually filling the GridView without using a SqlDataSource but then I cannot get the sorting to work when I do it that way. Actually not sure if the sorting will work this way either as I cannot get it to fill with data. Any ideas would be much appreciated.

View Replies !

SqlDataSource, GridView && A Button
hi .. i have a SqlDataSource, GridView & a Button .. i want to increase the condition in the "SelectCommand" below by one everytime i click the button .. i mean to be like that ID < 8 instead of ID < 7
so, the GridView will show 7 ID's instead of 6 .. and it will increase everytime i hit the button<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT * FROM [table1] WHERE ID < 7">
</asp:SqlDataSource>

View Replies !

Profile, SQLDataSource And GridView
Hello.When I create a user at the ASP.NET database, I need to insert more fields than the defaults, and I do it like this: Dim customProfile As ProfileCommon = ProfileCommon.Create(CreateUserWizard1.UserName, True)
customProfile.telephone =
(CType(CreateUserWizard1.CreateUserStep.ContentTemplateContainer.FindControl("TelephoneText"),
TextBox)).Text(telephone example)Those data are inserted at the DB at the aspnet_Profile table, in the fields PropertyNames & PropertyValuesString, but they are saved together (see image above)

I want to separate those properties in the GridView as long as each property appears in a column, is it possible? Thank you very much, i'm expecting your answers.

View Replies !

Question About Gridview And SqlDataSource
i am now writing a web page which can allow users to edit the field(display in the gridview->gridview source is from sqldatasource), there is a problem(it seems that i have followed all steps in the book):
when the i edit the field and click update, in the web site, i can see those changes. however, i cant see any change in database table.
i cant find solution on this, could anyone help me to solve this problem? thx!

View Replies !

&<asp:SqlDataSource&> Generate SQL For GridView?
Hi guys.Im using a gridview to show some training data on my website which is populated by:<asp:SqlDataSource ID="ARENATraining" runat="server" ConnectionString="<%$ ConnectionStrings:ARConnection %>" SelectCommand="SELECT [EventType], [CourseLink], [EventDate], [EventTitle], [EventLocation], [EventWebsite] FROM [qry_FutureEvents] WHERE ([EventPrivate] = @EventPrivate) ORDER BY [EventDate]"> <SelectParameters> <asp:Parameter DefaultValue="FALSE" Name="EventPrivate" Type="Boolean" /> </SelectParameters> So far so good..However I want to be able to filter the data.A) Show everythingB) Show individual EventType i.e. Seminar, Training etc etcIs it possible to generate the Select Command via a function? (im not using stored procedures for this part of the site, nor really want to at the moment). Id appreciate any help, otherwise ill be forced to curse and swear and use the good ol repeater and figureing out how to page it! Cheers guys

View Replies !

Changing Format Of Data In Gridview Using VB
Hello all,
I am trying to modify the output of a SELECT statement in a VB asp.net page that pulls data from a SQL DB. I only need to modify one column in the gridview, but I'm having some issues.
Here is the situation:SELECT TOP 24 ID, RecID, Timestamp, Answered, Holds, Dropped, Waits, Voicemail, Busied, LiveWaitsFROM mTrafficORDER BY Timestamp DESC
The Timestamp column returns a number value (i.e. 564566).In terms of a date, 564566 doesn't mean anything to the user, so I need to convert this number into a recognizable and accurate date.
The formula I need to implement is Timestamp/1440 - 1
The following SELECT statement returns the number as a date, but makes all records the same date:
SELECT TOP 24 ID, RecID, Convert(datetime, Timestamp/1440 + 1) as Timestamp, Answered, Holds, Dropped, Waits, Voicemail, Busied, LiveWaitsFROM mTrafficORDER BY Timestamp DESC
What do I need to do to implement this function dynamically into my gridview?
Thanks in advance!

Chris

View Replies !

An SQLDataSource On 2 Other DataSources? Show In A GridView
Hi,I have two SQLDataSources called "LeagueTableHome" an "LeagueTableAway" on my page.
I want to create another SQLDataSource called "LeagueTableTotal" on my page which adds up all the totals from each of the other two sources.
The datasource looks like this:
Team, Pld, W, D, L, F, A, Agg, Pts
my code for LeagueTableHome looks like this:
SELECT HomeTeam, 1 AS Pld, CASE WHEN HomeScore > AwayScore THEN 1 ELSE 0 END AS Won, CASE WHEN HomeScore = AwayScore THEN 1 ELSE 0 END AS Draw, CASE WHEN HomeScore < AwayScore THEN 1 ELSE 0 END AS Lost, HomeScore AS Scored, AwayScore AS Against, HomeScore - AwayScore AS Agg, CASE WHEN HomeScore > AwayScore THEN 3 ELSE 0 END AS Pts FROM tblFixtures WHERE (CompID = 1) AND (HomeScore IS NOT NULL)
I want then to show LeagueTableTotal in a GridView.
Can anybody help?

View Replies !

GridView && SqlDataSource Delete Problem
Hi guys! I have a simple windows form where a gridview is being populated by a database. I have checked the ability to update, insert delete. And everything is fine but when i want to delete a row it throws an exeption. The exeptions says: "Must declare the scalar variable "@id"."I haven't changed the delete, update and insert commands. They are as fallowsDeleteCommand="DELETE FROM [recepti] WHERE [id] = @id"InsertCommand="INSERT INTO [recepti] ([ime], [recepta], [snimka], [snimka2], [tip]) VALUES (@ime, @recepta, @snimka, @snimka2, @tip)" SelectCommand="SELECT * FROM [recepti]"UpdateCommand="UPDATE [recepti] SET [ime] = @ime, [recepta] = @recepta, [snimka] = @snimka, [snimka2] = @snimka2, [tip] = @tip WHERE [id] = @id" The id column is auto generated, unique, also it's a primery key.So any idea where is the problem?

View Replies !

Gridview Updated + SQLDatasource + UserName
Hi
I have a gridview which is using a SQLdatasource, to update the table. One of my parameters on the SP is username.
At the moment on page load I am declaring a session variable
Session("UserName") = me.user.identy.name
I then amend the update parameter in the SQL Datasource to accept the username from the session variable. - works fine, I was however wondering if there is a way of returning the username directly into the sqldatasource without having to pass it through a session variable?

regards

Tom

View Replies !

Number Of Records In SQLDataSource/GridView
What is the easiest way to obtain number of records in SQLDataSource (using select statement)/GridView. All that I've found in forums seems to be very difficult for such trivial task... Thank you!

View Replies !

GridView Using Sqldatasource Stored Procedure
hi, sorry for asking.im using a gridview and bind it to the sqldatasource.currently the im using the ide to perfrom the binding of the gridview and the sqldatasource.for the insert command, im using the sqldatasource store procedure to insert the value.the store procedure will return an error code if error was found.how was i able to get the return value, since everything was generated by the ide?

View Replies !

GridView Via SQLDataSource And Stored Procedure
Help!I am trying to fill my datagrid using the SQLDataSource, using a stored procedure.The stored procedure expects a parameter which I can collect via the querystring, or a string. How can I pass the parameter through the SQLDatasSource?My SQLDataSource is SQLData1. I already have:SQLData1.SelectCommandType = SqlDataSourceCommandType.StoredProcedureSQLData1.SelectCommand = "dbo.get_players"Thanks in advance,Karls

View Replies !

Binding A SqlDataSource, To A GridView At Runtime
Hello
I'm experiencing some problems, binding a SqlDataSource to a GridView.
The following code creates the SqlDataSource:            string strConn = ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString;            string strProvider = ConfigurationManager.ConnectionStrings["ConnectionString"].ProviderName;                        SqlDataSource ds = new SqlDataSource(strProvider, strConn);            ds.SelectCommand = "SELECT * FROM rammekategori";
Then i bind the SqlDataSource to a GridView:
         GridView1.DataSource = ds;            GridView1.DataBind();

ErrorMessage:
Format of the initialization string does not conform to specification starting at index 0.
Exception Details: System.ArgumentException: Format of the initialization string does not conform to specification starting at index 0.Line 24:             GridView1.DataBind();Am i totally off target here? Can it be something about, that you have to set the datasource of the gridview, before the Page_Load event?

Thanks - MartinHN

View Replies !

SqlDataSource Not Updating On Editing GridView
Hi, I'm new in ASP 2.0. I need to incorporate edit and delete capability in GridView. Using the wizard, i've generated this code. When I delete a row, it gets deleted but update does not work. I've tried several ways. I got no error or exception. But row is not updated. I've checked database, and I think the update query is not executing at all. Please let me know, what I'm doing wrong? Here is the source code for reference. I'm using Visual Studio 2005 with SQL server 2005 Express Edition. Regards

==========================================================
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="QuoteItemID" DataSourceID="SqlDataSource1"> <Columns> <asp:CommandField ShowDeleteButton="True" ShowEditButton="True" CausesValidation="False" /> <asp:BoundField DataField="QuoteItemID" HeaderText="QuoteItemID" InsertVisible="False" ReadOnly="True" SortExpression="QuoteItemID" /> <asp:BoundField DataField="QuoteID" HeaderText="QuoteID" SortExpression="QuoteID" /> <asp:BoundField DataField="ChargeCodeID" HeaderText="ChargeCodeID" SortExpression="ChargeCodeID" /> <asp:BoundField DataField="RateItemAmount" HeaderText="RateItemAmount" SortExpression="RateItemAmount" /> </Columns> </asp:GridView> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ratesdb %>" DeleteCommand="DELETE FROM [Quote_item] WHERE [QuoteItemID] = @QuoteItemID" InsertCommand="INSERT INTO [Quote_item] ([QuoteID], [ChargeCodeID], [RateItemAmount]) VALUES (@QuoteID, @ChargeCodeID, @RateItemAmount)" SelectCommand="SELECT * FROM [Quote_item]" UpdateCommand="UPDATE [Quote_item] SET [QuoteID] = @QuoteID, [ChargeCodeID] = @ChargeCodeID, [RateItemAmount] = @RateItemAmount WHERE [QuoteItemID] = @QuoteItemID" ConflictDetection="CompareAllValues"> <DeleteParameters> <asp:Parameter Name="QuoteItemID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="QuoteID" Type="Int32" /> <asp:Parameter Name="ChargeCodeID" Type="Int32" /> <asp:Parameter Name="RateItemAmount" Type="Decimal" /> <asp:Parameter Name="QuoteItemID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="QuoteID" Type="Int32" /> <asp:Parameter Name="ChargeCodeID" Type="Int32" /> <asp:Parameter Name="RateItemAmount" Type="Decimal" /> </InsertParameters> </asp:SqlDataSource>

View Replies !

Qestion About SQLDataSource, Gridview, And Update Panel
I have a gridview that is tied to a SQLDataSource control which is inside an update panel.
What I'm trying to accomplish is when the page is loaded the gridview is filled from the SQLDataSource. I have some textboxes also on the page so that the user can add new items to the gridview. The update panel trigger is tied to my code behind page through a button click which added the new data to the DB with an INSERT statement. Since the gridview was inside the update panel I thought when I placed the new data into the DB and the update panel caused the portion of the page that holds the gridview to refresh that the gridview would show the newly added data but it is not.
I am missing something but I do not know what. I tried adding a gridview1.databind() and SQLDataSource1.DataBind() but niether caused the update of the gridview as I had hoped.
Thanks for any of your help.
Ty

View Replies !

Binding A Gridview To Sqldatasource On Button Click
i am using 2 textbox to search name and instituition of some students. on button click need to display the result on gridview. but i dont get any result.. pl adviceSqlDataSource1.SelectCommand = "SELECT Sname, Address, Instituition, Role, Testgroup, Email FROM std_det WHERE (Sname LIKE '%'+@Param1+'%') AND (Instituition = 'RASET') AND (Role LIKE '%'+@Param2+'%') AND (Instituition = 'RASET')"; name.ControlID = "TextBox3"; name.DefaultValue = "%"; name.Name = "Param1"; name.PropertyName = "Text"; inst.ControlID = "TextBox4"; inst.DefaultValue = "%"; inst.Name = "Param2"; inst.PropertyName = "Text"; //SqlDataSource1.Select(DataSourceSelectArguments.Empty); SqlDataSource1.SelectParameters.Add(name); SqlDataSource1.SelectParameters.Add(inst); SqlDataSource1.DataBind(); //DataView dv = (DataView)this.SqlDataSource1.Select(DataSourceSelectArguments.Empty); GridView2.DataSourceID = "SqlDataSource1"; GridView2.DataBind();

View Replies !

Sqldatasource How To Not Load The Gridview With The SqldataSoruce At Page_load C#
hello all
1)   I was using SQLdataSource and bind it with the gridviw to show its data.  so that is how is running
      when the page load, i see the data is posted on the page on the gridview.
      But what i need to do when I want a user to click a button and then the Gridview show the data.

   As i was creating a SQLDatasource, it was click click and click but I want to put that sqldatasouce to load the data in gridview by a click event.

2) my second question is also related to the first one or just similar.
I dont want to get all the data rather filter it.
so once the page load, there is a button and a text box.
In the text box user going to type the EmployeeID and click the "Employee Info" button and then the data would show up.
Rather i use te DetaildView Control . What should I do to load the information on the Text boxes rather then on the GridView since it is going to be a single recrod.
Thanks all

View Replies !

SqlDataSource + GridView - Scalar Variables Not Being Read
Hi all, first post, and I am desperate.
I have a SqlDataSource with a Select, Update and Delete command. From what I understand, scalar variables should be read automatically from the GridView's BoundField columns when it executes a command on it. Here is my code:

<asp:GridView
ID="teamGrid"
EmptyDataText="n/a"
DataKeyNames="TeamId"
AutoGenerateColumns="false"
DataSourceID="teamSource"
OnRowEditing="validateEdit"
OnRowDeleting="validateDelete"
runat="server">

<Columns>
<asp:CheckBoxField DataField="TeamApproved" HeaderText="Approved" />
<asp:BoundField DataField="TeamName" HeaderText="Team Name" />
<asp:TemplateField HeaderText="City">
<ItemTemplate>
<asp:Label runat="server"><%# Eval("City") %></asp:Label>, <asp:Label runat="server"><%# Eval("ProvinceCode") %></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="RequestedDivision" HeaderText="Division Req." ControlStyle-Width="60px" />
<asp:BoundField DataField="DivisionCode" HeaderText="Assigned Division" ControlStyle-Width="60px" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:BoundField DataField="DivisionNumber" HeaderText="Division Number" ControlStyle-Width="60px" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:BoundField DataField="Password" HeaderText="Password" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:CheckBoxField DataField="Paid" HeaderText="Paid" />
<asp:HyperLinkField Text="view players" ItemStyle-Width="70px" ItemStyle-HorizontalAlign="Center" DataNavigateUrlFields="TeamId" DataNavigateUrlFormatString="viewTeamPlayers.aspx?teamId={0}" ShowHeader="false" />
<asp:CommandField ItemStyle-HorizontalAlign="Center" ItemStyle-Width="30px" ButtonType="Link" EditText="edit" ShowEditButton="true" ShowHeader="false" />
<asp:TemplateField ShowHeader="False" ItemStyle-HorizontalAlign="Center" ItemStyle-Width="30px">
<ItemTemplate>
<asp:LinkButton runat="server" CausesValidation="False" CommandName="Delete" OnClientClick='return confirm("Deleting this team will also delete the players. Are you sure you wish to continue?");' Text="delete" />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<asp:SqlDataSource
ID="teamSource"
ConnectionString="<%$ ConnectionStrings:MB %>"
SelectCommand="SELECT TeamId, TeamName, ProvinceCode, City, DivisionCode, DivisionNumber, TeamApproved, RequestedDivision, Paid, Password, CaptainId, Player2Id, Player3Id, Player4Id FROM [Team]"
UpdateCommand="UPDATE [Team] SET TeamName = @TeamName, DivisionCode = @DivisionCode, DivisionNumber = @DivisionNumber, TeamApproved = @TeamApproved, Paid = @Paid, Password = @Password WHERE TeamId = @TeamId"
runat="server" />
</form>

I apologize for the way the code is put in, the code thing cut off a lot of the text! The problem I'm getting is, when the 'Update' button is hit, I get the error: Must declare the variable '@TeamId'.

I've tried putting "Update Parameters", that takes away the error, but the row does not update. I've browsed the internet and saw the same problems in lots of areas, but either a) none of the solutions work for me, or b) they don't really apply to my case.
I'm using ASP .NET 2.0, and (obviously) C#. SQL Server database.
Any help is greatly appreciated. Thanks in advance,

- Branden

View Replies !

Change Dynamically(via Code) The SqlDataSource For A GridView....
Hi,
say I have two Sqldatasources objects:SqlDataSource1 and SqlDataSource2....
Does anybody know how can I alter programmatically these two sqldatasources in a gridview?
Thanks!!!

View Replies !

Problem Encountered With Filterparameter On SQLDataSource For GridView
Hi,
I have a GridView connected to a sqldatasource control. Everything is working great, updates, paging and filtering with one exception. When the user enters in a name like O'Reilly (with a single quote), the page errors. The error returned is:
Syntax error: Missing operand after 'Reilly' operator.
Here is the definition of the sqldatasource:
<asp:SqlDataSource ID="SqlDataSourcePersons" runat="server" ConnectionString="<%$ ConnectionStrings:database %>" SelectCommand="SELECT [Id], [FirstName], [LastName], , [PersonTypeId], [WorkerId], [_workerNTId], [Title], [City] FROM [Person]" FilterExpression="(FirstName like '{0}%') AND (LastName like '{1}%') AND (WorkerId like '{2}%') AND (City like '{3}%')" ProviderName="System.Data.SqlClient"> <FilterParameters> <asp:ControlParameter ControlID="TextBoxFirstName" Name="FirstName" DefaultValue="%" PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="TextBoxLastName" Name="LastName" DefaultValue="%" PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="TextBoxWorkerId" Name="WorkerId" DefaultValue="%" PropertyName="Text" Type="String" /> <asp:ControlParameter ControlID="TextBoxCity" Name="City" DefaultValue="%" PropertyName="Text" Type="String" /> </FilterParameters> </asp:SqlDataSource>
Any suggestions would be appreciated.
Thank you, Jim

View Replies !

Removing Rows From A SqlDataSource Before It Is Bound To A GridView?
I have a SqlDataSource that I need to remove the first 3 rows from before it is bound to a GridView. How would I go about doing this?
(if I could remove them at the db level in the sproc I would, but right now that is not an option - so I need to do it once I've already received the data)
Thanks.

View Replies !

GridView Update, With SqlDataSource UpdateCommand Set From Code-behind. (C#)
Hi all
I have a GridView on an aspx page, that is enabled for editing, deletion and sorting.
In the Page_Load event of the aspx page, i add a SqlDataSource to the page, and bind the source to the GridView.
When i click the update, or delete button, it makes a PostBack, but nothing is affected. I'm sure this has got something to do with the parameters.
First, i tried having the GridView.AutoGenerateColumns set to True. I have also tried adding the columns manually, but no affect here either.
The code for setting the commands, and adding the SqlDataSource to the page are as follows:
            string strConn = ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString;            string strProvider = ConfigurationManager.ConnectionStrings["ConnectionString"].ProviderName;            string selectCommand = "SELECT * FROM rammekategori";                        SqlDataSource ds = new SqlDataSource(strProvider, strConn, selectCommand);            ds.ID = "RammeKategoriDS";            ds.UpdateCommand = "UPDATE rammekategori SET Kategoribeskrivelse = @Kategoribeskrivelse WHERE (Kategorinavn = @Kategorinavn)";            ds.DeleteCommand = "DELETE FROM rammekategori WHERE (Kategorinavn = @Kategorinavn)";                        Parameter Kategorinavn = new Parameter("Kategorinavn", TypeCode.String);            Parameter Kategoribeskrivelse = new Parameter("Kategoribeskrivelse", TypeCode.String);            ds.UpdateParameters.Add(Kategorinavn);            ds.UpdateParameters.Add(Kategoribeskrivelse);            ds.DeleteParameters.Add(Kategorinavn);
            Page.Controls.Add(ds);
            SqlDataSource m_SqlDataSource = Page.FindControl("RammeKategoriDS") as SqlDataSource;
            if (m_SqlDataSource != null)            {                this.gvRammeKategorier.DataSourceID = m_SqlDataSource.ID;            }
As mentioned - no affect at all!
Thanks in advance - MartinHN

View Replies !

Why Can't I Enable Editing On A Gridview That Gets It's Data From A View Through An SqlDataSource?
Hi,
I think the title explains it all really. I cannot configure the SqlDataSource to add Insert, Update and Delete statements - not through the wizard anyway.
The view combines two tables, each containing 3 columns. I have tried using different combinations of columns, and ended up selecting all of them (making sure the foreign key column of the first table was given a different alias to the primary key column of the second table) but I still cannot enable editing.
Cheers,
Patrick

View Replies !

Gridview Button For Calling Sqldatasource.update Fails


<%@ Page
Language="VB"
%>
<html>
<head id="Head1" runat="server">
    <title>Asset Survey</title>
</head>
<SCRIPT runat="server">
    Protected Sub SqlDataSource1_Selecting(ByVal
sender As Object,
ByVal e As
System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting
        e.Command.Parameters("Name1").Value = User.Identity.Name
End Sub

    Protected Sub SqlDataSource1_Updating(ByVal
sender As Object,
ByVal e As
System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles SqlDataSource1.Updating        'For some
reason, this function executes twice      '2nd execution gets error: "Data type
mismatch in criteria expression."        'e.Command.Parameters("PrimaryKey1").Value
= intPrimaryKey        'e.Command.Parameters("Responder1").Value
= strUser        'e.Command.Parameters("ResponseDate1").Value
= dtModDate        'e.Command.Parameters("Response1").Value
= strResponse        'e.Command.Parameters("ResponseComments1").Value
= strComments    End Sub

    Protected Sub
GridView1_RowCommand(ByVal sender As Object, ByVal e As
GridViewCommandEventArgs) _
        Handles
GridView1.RowCommand
        Dim
GridRow1 As Integer
= Convert.ToInt32(e.CommandArgument)
        If
e.CommandName = "UpdateYes" Then
            'code here to disable buttons and textbox
            '...

SqlDataSource1.UpdateParameters("Response1").DefaultValue
= "Yes"
        End If

        If
e.CommandName = "UpdateNo" Then
            'code here to disable buttons and textbox
            '...

SqlDataSource1.UpdateParameters("Response1").DefaultValue
= "No"
        End If


    'if I use the SqlDataSource1_Updating
function, I get the mismatch error
        'but if I (mis)use the DefaultValue
parameter, no update occurs.
        SqlDataSource1.UpdateParameters("ResponseComments1").DefaultValue = _

GridView1.Rows(GridRow1).FindControl("txtComments").ToString
        SqlDataSource1.UpdateParameters("Responder1").DefaultValue =
User.Identity.Name
        SqlDataSource1.UpdateParameters("ResponseDate1").DefaultValue =
DateTime.Now
        SqlDataSource1.UpdateParameters("PrimaryKey1").DefaultValue = _

GridView1.Rows(GridRow1).Cells(0).Text


Try

SqlDataSource1.Update() 'Error Here if I use on_updating: "Data
type mismatch in criteria expression."
        Catch except As Exception
            ' Handle the Exception.
        End Try
    End Sub

</SCRIPT>
<body>
    <form id="formInv"
runat="server">
    <div>
          <asp:SqlDataSource ID="SqlDataSource1" runat="server"
            ConnectionString="<%$
ConnectionStrings:LocalTestMDB %>"
            ProviderName="<%$
ConnectionStrings:LocalTestMDB.ProviderName %>"
            SelectCommand="SELECT
[PrimaryKey], [Name], [AssetTag], [Response], [Responder],
[ResponseDate],[ResponseComments] FROM [Tablename] WHERE ([Name] = ?) ORDER BY
[Login Name], [AssetTag]"
            UpdateCommand="Update
[Tablename] SET [Response]=@Response1, [Responder]=@Responder1,
[ResponseDate]=ResponseDate1, [ResponseComments]=ResponseComments1 WHERE
[PrimaryKey]=@PrimaryKey1"
            OnSelecting="SqlDataSource1_Selecting"
            OnUpdating="SqlDataSource1_Updating">
            <SelectParameters>

       <asp:Parameter DefaultValue="" Name="Name1" Type=String />
            </SelectParameters>
            <UpdateParameters>

<asp:Parameter Name="ResponseComments1"
Type=String DefaultValue=""
/>

<asp:Parameter Name="Response1"
Type=String DefaultValue=""
/>

<asp:Parameter Name="ResponseDate1"
Type=DateTime DefaultValue="#8/1/2007
12:00:00PM#" />

<asp:Parameter Name="Responder1"
Type=String DefaultValue=""
/>

<asp:Parameter Name="PrimaryKey1"
Type=Int32 DefaultValue=0 />
            </UpdateParameters>
        </asp:SqlDataSource>
        <span>Hi, Please
respond by clicking "Yes" or "No" for each asset</span>
        <asp:GridView ID="GridView1" runat="server"
            AutoGenerateColumns="False"
DataKeyNames="PrimaryKey"
            DataSourceID="SqlDataSource1">


<Columns>

<asp:BoundField DataField="PrimaryKey"
HeaderText="PrimaryKey"

            AccessibleHeaderText="PrimaryKey" Visible=False/>


<asp:BoundField DataField="Name"
HeaderText="Name"
SortExpression="Name"

            AccessibleHeaderText="Name" />


<asp:BoundField DataField="AssetTag"
HeaderText="AssetTag"
SortExpression="AssetTag"

    AccessibleHeaderText="AssetTag"
/>

<asp:TemplateField
HeaderText="Please
Respond">

<ItemTemplate>

<asp:Button ID="btnYes" runat="server"
Text="Yes"
Visible="true"

        CommandName='UpdateYes'

        CommandArgument='<%#
CType(Container, GridViewRow).RowIndex %>' />

<asp:Button ID="btnNo" runat="server"
Text="No"
Visible="true"

        CommandName='UpdateNo'

        CommandArgument='<%#
CType(Container, GridViewRow).RowIndex %>' /> 

<br />

<asp:Label ID="lblComments"
runat="server"
Text="Comments:"
Visible=True></asp:Label>

<asp:TextBox ID="txtComments"
runat="server"
Text='<%#
Bind("ResponseComments") %>'


Visible=True MaxLength=512 Height=24 Width=320 Wrap=True Enabled=True

        TextMode=MultiLine></asp:TextBox> 

</ItemTemplate>

</asp:TemplateField>
            </Columns>
        </asp:GridView>
        </div>
    </form>
</body>
</html>

View Replies !

Performance Comparison - Code Vs SqlDataSource, Gridview Etc Vs PlainControl
There are so many ways to use database in asp.net/ado.net, I'm a bit confused about their difference from the performance point of view.So apparently SqlDataSource in DataReader mode is faster than DataSet mode, at a cost of losing some bolt-on builtin functions.What about SqlDataSource in DataReader mode vs manual binding in code? Say creating a SqlDataSource ds1 and set "DataSourceID" in Gridview, vs manually creating the SqlConnection, SqlCommand, SqlDataReader objects and mannually bind the myReader object to the gridview with the Bind() method.Also Gridview is a very convenient control for many basic tasks. But for more complex scenarios it requires lots of customization and modification. Now if I do not use gridview at all and build the entire thing from scratch with basic web controls such as table and label controls, and mannually read and display everything from a DataReader object, how's the performance would be like compared to the Gridview-databind route?

View Replies !

Problem To Retrieve Data With Help Of SP And Sqldatasource,gridview,controls
Hello,

I m creating my application in ASP.Net
2005 C# with the backend SQL Server 2005.
On my first form i have used some
label,textboxs,dropdownlists,radiobutton and checkbox.

      On the click event of the button the data gets stored into the
database.I have created the stored procedures for the insert,update,delete.
I have used sqldatasource for the connection to server and
storing data.
On submit click event it should be inserted and displayed on
the grid.

      Now,what i want to
know is anything missing in the following code on the submit click event as the
data is not inserted and shown in the gridview.If i write the simple sql insert
query then there's no problem.The problem is with the stored procedure which is
used in C#.In sql server the stored procedure executes correctly.

The stored procedure is running on the sql-server so
there must be problem on the click event.
Is any variables which are used in stored procedure are to be
noted ?

SQL 2005 DATABASE TABLE
DETAILS

1) employee_table

PKEmployeeid int(4) NOT
NULL                     (TEXTBOX CONTROL â€“AUTOGENERATED)

FKLocationid int(4)NOT
NULL                         (LABEL
CONTROL -- AUTOGENERATED)

Employeename varchar(15)NOT NULL              (TEXTBOX CONTROL)

City varchar(15)
(DROPDOWNLIST CONTROL)

Joindate datetime
(DATEPICKER )

Salary money
(TEXTBOX CONTROL)

2) location_table

PKLocationid
int(4)NOT NULL                          (LABEL CONTROL -- AUTOGENERATED)

Locationname varchar(15)NOT NULL
                 (TEXTBOX
CONTROL)

     GRIDVIEW

<asp:GridView ID="GridView1"
runat="server" AutoGenerateSelectButton="true"

SelectedRowStyle-CssClass="selectedRow"
DataSourceID="SqlDataSource1"

DataKeyNames="employeeid,locationid" >

<InsertParameters>
<asp:Parameter Name="employeeid"
Direction="Output" />

<asp:Parameter Name="locationid"
Direction="Output" />

<asp:Parameter
Name="employeename" Type="String" Direction="Input"/>

<asp:Parameter Name="city" Type="String" Direction="Input"/>

<asp:Parameter Name="joindate"
Type="Datetime" Direction="Input"/>

<asp:Parameter Name=''salary'' Type="INT16" Direction="Input"/>
<asp:Parameter Name="locationname"
Type="String" Direction="Input"/>
</InsertParameters>

<asp:GridView / >

         SQLDATASOURCE

<asp:SqlDataSource
ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:employee_table,location_table
%>"
ProviderName="System.Data.SqlClient"
InsertCommand="EmpLocationInsertJoin"
InsertCommandType="StoredProcedure"/>


C# CODE
protected void Page_Load(object sender,
EventArgs e)
{
GridView1.Visible = false;

}

protected void cmdsubmit_Click(object sender, EventArgs e)
{

        string employeename = tbemployeename.Text.ToString();
        string locationname
= tblocationname.Text.ToString();
        tbemployeeid.Text=command.Parameters["employeeid"].Value.ToString();

tblocationid.Text=command.Parameters["locationid"].Value.ToString();
SqlDataSource1.InsertParameters[0].DefaultValue = employeename;
        SqlDataSource1.InsertParameters[1].DefaultValue = locationname;
       SqlDataSource1.InsertParameters[2].DefaultValue = city;

SqlDataSource1.InsertParameters[3].DefaultValue = joindate;          SqlDataSource1.InsertParameters[4].DefaultValue
= salary;

   SqlDataSource1.Insert();
   GridView1.Visible = true;
}


      protected void
cmdview_Click(object sender, EventArgs e)
{
GridView1.Visible = true;
}

I want to perform the edit and delete with the commandfield of
edit and delete which are present in the gridview.

Pls give me the reply at the earliest...





View Replies !

Prevent Loading Sqldatasource And Populating Gridview On Pageload
Hi,
I got a page with 3 sqldatasources and 2 dropdownlists and 1 gridview.
2 sqldatasources may load when the page load adn fill in the 2 DDL's.
But 1 sqldatasource and the gridview may only be loaded when I press a button. This is because otherwise every time I load the page more then 5000 records. (the 2 DDL's are filters for the 3th sqldatasource)
Anyone an idea how to solve this problem?
Best regards,
Karel

View Replies !

Retrieving Selected Gridview Column Values For SQLDatasource Asp:controlparameters
Not sure if this is the correct forum, but I 'm having problems retrieving a sqldatasource's asp:control parameter values from a selected row (during edit) in a gridview to update a record thru a stored procedure. The stored procedure is pretty intense, so I'd like to keep it in SQL if possible instead of creating the generic "update table set ..." that I see in most examples. It seems as if I can't get the propertyname right or something because it keeps giving me a "Procedure or function XX has too many arguments specified error". Maybe the DataKeyNames is not right?? I've tried just passing one parameter (ProductID-same as DataKeyNames) using "SelectedValue" as propertyname and still get the same. It's got to be something very simple, but I'm at a loss. All parameters are spelled the same in the sp (with an added "@" at start) as in the asp:controlparameters. Here's the gridview (asp.net 2.0 connecting to SQL Server 2005):
<asp:GridView ID="gvLoadEditProductPrices" runat="server" AutoGenerateColumns="False" AllowSorting="True" DataSourceID="SqlDataSource1" DataKeyNames="ProductID">
<Columns>
<asp:CommandField ShowEditButton="True" />
<asp:BoundField DataField="ProductID" HeaderText="ProductID" HeaderStyle-BackColor="white" InsertVisible="False"
ReadOnly="True" SortExpression="ProductID" />
<asp:BoundField DataField="Product" HeaderText="Product" SortExpression="Product" ReadOnly="True" />
<asp:BoundField DataField="ProductCat" HeaderText="ProductCat" SortExpression="ProductCat" ReadOnly="True" />
<asp:BoundField DataField="VarRate" HeaderText="VarRate" SortExpression="VarRate" />
<asp:BoundField DataField="loadid" HeaderText="loadid" InsertVisible="False" ReadOnly="True"
SortExpression="loadid" />
<asp:BoundField DataField="loadamount" HeaderText="loadamount" SortExpression="loadamount" ReadOnly="True" />
<asp:BoundField DataField="ProductCol" HeaderText="ProductCol" SortExpression="ProductCol" ReadOnly="True" />
<asp:BoundField DataField="PageID" HeaderText="PageID" SortExpression="PageID" ReadOnly="True" />
</Columns>
</asp:GridView>
and the sqldatasource's info:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:MARSProductEditor %>" ProviderName="System.Data.SqlClient" SelectCommand="spGetLoadEditProductPrices" SelectCommandType="StoredProcedure" UpdateCommand="spUpdateProductPrices" UpdateCommandType="StoredProcedure" >
<UpdateParameters>
<asp:ControlParameter Name="ProductID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("ProductID")></asp:ControlParameter>
<asp:ControlParameter Name="LoadID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("LoadID")></asp:ControlParameter>
<asp:ControlParameter Name="PageID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("PageID")></asp:ControlParameter>
<asp:ControlParameter Name="ProductCol" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("ProductCol")></asp:ControlParameter>
<asp:ControlParameter Name="NewRate" Type="Double" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("NewRate")></asp:ControlParameter>
</UpdateParameters>
<SelectParameters>
<asp:ControlParameter ControlID="ddlEstLoadsPerAcre" Name="LoadID" PropertyName="SelectedValue"
Type="Int32" />
<asp:ControlParameter ControlID="txtEditType" Name="PageName" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>

TIA,
John

View Replies !

Gridview - SqlDatasource - How Do You Get All Values For A Like Text Parameter Or A Boolean Field When Filtering?
I have a gridview connected to a sqldatasource, and it works pretty good. It gives me the subsets of the information that I need. But, I really want to let them choose all the companies and/or any status. What's the best way to get all the values in the gridview...besides removing the filters :)
I thought the company would be easy, I'd just set the selected value to blank "", and then it'd get them all....but that's not working. And, for the boolean, I have no idea to get the value without having a separate query.
(tabs_done=@tabsdone) and (company like '%' + @company + '%')1 <asp:DropDownList ID="drpdwnProcessingStatus" runat="server">
2 <asp:ListItem Value="0">Open</asp:ListItem>
3 <asp:ListItem Value="1">Completed</asp:ListItem>
4 </asp:DropDownList>
5
6
7 <asp:DropDownList ID="drpdwnCompany" runat="server">
8 <asp:ListItem Value="">All</asp:ListItem>
9 <asp:ListItem Value="cur">Cur District</asp:ListItem>
10 <asp:ListItem Value="jho">Jho District</asp:ListItem>
11 <asp:ListItem Value="sea">Sea District</asp:ListItem>
12 <asp:ListItem Value="san">Net District</asp:ListItem>
13 <asp:ListItem Value="sr">Research District</asp:ListItem>
14 </asp:DropDownList>
15
16
17 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:HRFormsConnectionString %>"
18 SelectCommand="SELECT DISTINCT [id], [lastname], [company] FROM [hr_term] hr where (tabs_done=@tabsdone) and (company like '%' + @company + '%')">
19 <SelectParameters>
20 <asp:ControlParameter ControlID="drpdwnProcessingStatus" DefaultValue="0" Name="tabsdone" PropertyName="SelectedValue" />
21 <asp:ControlParameter ControlID="drpdwnCompany" DefaultValue="" Name="company" PropertyName="SelectedValue" />
22 </SelectParameters>
23 </asp:SqlDataSource>
24

View Replies !

Issue With Getting Values From Child Controls In A Gridview, To Use For The Update Using A SQLDataSource Control
Hi all,
I have a gridview bound with a SQLDataSource. I am using the Update feature of the SQLDataSource to update a SQL Server database with values entered into the gridview. However I am not getting it to work. I believe this is due to the controls that contain the user entries are not the gridview itself, but rather child controls within the gridview. I have been using the names of the actual controls but nothing happens. Upon submit, the screen returns blank, and the database is not updated. Here is some code:

<asp:GridView ID="GridEditSettlement" runat="server" AutoGenerateColumns="False" BackColor="Navy"
BorderColor="IndianRed" BorderStyle="Solid" Font-Names="Verdana" Font-Size="X-Small" DataSourceID="SqlDataSource_grid" AllowPaging="True" AllowSorting="True" ForeColor="White" DataKeyNames="legid">
<Columns>
<asp:CommandField ShowEditButton="True" CancelImageUrl="~/App_Graphics/quit.gif" CancelText="" EditImageUrl="~/App_Graphics/EditGrid.GIF" EditText="" UpdateImageUrl="~/App_Graphics/save.gif" UpdateText="" ButtonType="Image" />
<asp:BoundField DataField="StartDate" HeaderText="Start Date" ReadOnly="True" />
<asp:BoundField DataField="EndDate" HeaderText="End Date" ReadOnly="True" />
<asp:BoundField DataField="CounterpartDealRef" HeaderText="CP Deal Ref" ReadOnly="True" />

<asp:TemplateField HeaderText="Preliminary Settlement Price" ><ItemTemplate>
<asp:Label ID=lblPreliminary runat=server Text='<%# Bind("PrimarySettlementPrice") %>' />
</ItemTemplate>
<EditItemTemplate>
<asp:TextBox runat="server" ID=txtPrimaryPrice Text='<%# Bind("PrimarySettlementPrice") %>'></asp:TextBox>

</EditItemTemplate></asp:TemplateField>

<asp:TemplateField HeaderText="Agreed Settlement Price"><ItemTemplate>
<asp:Label ID=lblAgreed runat=server Text='<%# Bind("AgreedSettlementPrice") %>' />
</ItemTemplate>
<EditItemTemplate>
<asp:TextBox runat="server" ID=txtAgreedPrice Text='<%# Bind("AgreedSettlementPrice") %>'></asp:TextBox>

</EditItemTemplate></asp:TemplateField>

<asp:BoundField DataField="Volume" HeaderText="Volume" ReadOnly="True" />
<asp:BoundField DataField="Price" HeaderText="Price" ReadOnly="True" />
<asp:BoundField DataField="TotalVolume" HeaderText="Total Volume" ReadOnly="True" />
<asp:BoundField DataField="InstrumentName" HeaderText="Instrument" ReadOnly="True" />
<asp:BoundField DataField="NominalValue" HeaderText="Nominal Value" ReadOnly="True" />
<asp:BoundField DataField="Strike" HeaderText="Strike" ReadOnly="True" />
<asp:BoundField DataField="DeliveryDate" HeaderText="Delivery Date" ReadOnly="True" />
<asp:TemplateField HeaderText="LegId" SortExpression="LegId">
<ItemTemplate>
<asp:Label ID="lblLegID" runat="server" Text='<%# Bind("LegId") %>'></asp:Label>
</ItemTemplate>
<EditItemTemplate>
<asp:TextBox runat="server" ID=txtLegID Text='<%# Bind("LegId") %>'></asp:TextBox>

</EditItemTemplate>
</asp:TemplateField>

</Columns>
<RowStyle BackColor="#FFFF66" ForeColor="#333333" />
<EditRowStyle BackColor="#FFFF66" Font-Names="Verdana" Font-Size="X-Small" ForeColor="#333333" />
<PagerStyle ForeColor="White" />
<AlternatingRowStyle BackColor="White" ForeColor="#333333" />
</asp:GridView>
 <br />

<asp:SqlDataSource ID="SqlDataSource_grid" runat="server" ConnectionString="<%$ ConnectionStrings:DealCaptureDev %>" SelectCommand="sp_get_single_deal" SelectCommandType="StoredProcedure" UpdateCommand="Update trDealLeg Set PrimarySettlementPrice=@primarysettlement, AgreedSettlementprice=@agreedsettlement, LastUpdate=GetDate(), LastUpdateBy=Session('userid') Where LegID=@legid" EnableCaching="True" ConflictDetection="CompareAllValues" ProviderName="System.Data.SqlClient">
<SelectParameters>
<asp:QueryStringParameter DefaultValue="" Name="dealnum" QueryStringField="deal"
Type="String" />
</SelectParameters>
<UpdateParameters>
<asp:ControlParameter ControlID="txtLegId" PropertyName="Text" Name="legId" />
<asp:ControlParameter ControlID="txtPrimarySettlement" Name="primarysettlement" PropertyName="Text" />
<asp:ControlParameter ControlID="txtAgreedSettlement" Name="agreedsettlement" PropertyName="Text"/>
<asp:SessionParameter DefaultValue="" Name="userid" SessionField="userid" />
</UpdateParameters>
</asp:SqlDataSource>

As seen above, controls such as txtPrimarySettlement are referenced but the update is not successful. The text boxes are within the GridEditSettlement gridview. In the .aspx code I cannot use FindControl (at least I don't think it will work).
So the questions are: Is it possible to reference the child controls, if so - how? Is there another way to do this, such as in the vb code behind - in the either the gridview's RowUpdating event or the SQLDataSource's Updating event.
What is the best approach? Anyone come up against this issue before?
Thanks,
KB

View Replies !

SELECT A Single Row With One SqlDataSource, Then INSERT One Of The Fields Into Another SqlDataSource
What is the C# code I use to do this?
I'm guessing it should be fairly simple, as there is only one row selected. I just need to pull out a specific field from that row and then insert that value into a different SqlDataSource.

View Replies !

Gridview Select
I am using a GridView which is select enabled. I have another sqldatasource control on my page which will run a SQL query but needs a parameter. This parameter is from a column (EmployeeID) of the selected row in the gridview. In the Sqldatasource control I have specified the parameter source as a control which is Gridview .But I dont know how to point to the EmployeeID column of the selected row.Please help.

View Replies !

Changing SelectMethod In SQLDataSource
I have a gridview bound to an ObjectDataSource, which is a dataset populated by SQL queries. The gridview works with the default SelectMethod configured in the ObjectDataSource. I would like to be able to change the SelectMethod based on user input, which would call a different query. I have one textbox for input and several buttons to pick the type of filter.
My gridview populates on with the default selectmethod if I create a button that does nothing but a postback. My other buttons run the following codes which returns nothing. Any ideas what I'm doing wrong?
If e.CommandArgument = "Last_Name" Then
EmployeeData.SelectMethod = "GetDataByLastName"
End If
If e.CommandArgument = "First_Name" Then
EmployeeData.SelectMethod = "GetDataByFirstName"
End If
gvPhoto.DataSourceID = EmployeeData.ID
gvPhoto.DataBind()

Thanks.
Lisa

View Replies !

Select Parameters With Gridview
I have a form that has 4 fields to fill in. I have a button that can add these fields to a sql database. I also want to put a button next to the "add" button so you can fill out the same fields and search for those values. Here's what i have so far. I want to select based on the fields, but i'm having trouble with the syntax of the parameters. I also want to add something, so if nothing is filled out in one of those boxes, it retuns back all records for the default value.
string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnection);

String selectCmd = "SELECT * FROM users WHERE firstname = @firstame or lastname = @lastname or office = @office or team = @team";
SqlDataAdapter myCommand = new SqlDataAdapter(selectCmd, myConnection);

myCommand.SelectCommand.Parameters.Add(new SqlParameter("@firstname", SqlDbType.VarChar, 50));

myCommand.SelectCommand.Parameters.Add("@firstname", txtFirstName.Text);
myCommand.Parameters.AddWithValue("@lastname", txtLastName.Text);
myCommand.Parameters.AddWithValue("@team", dwnTeam.Text);
myCommand.Parameters.AddWithValue("@office", dwnOffice.Text);

DataSet ds = new DataSet();
myCommand.Fill(ds, "users");

MyDataGrid.DataSource = ds.Tables["users"].DefaultView;
MyDataGrid.DataBind();

View Replies !

Gridview / SqlDataSource Error - Procedure Or Function &<stored Procedure Name&> Has Too Many Arguments Specified.
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.

View Replies !

Select Just A Couple Of Rows Into Gridview
I am using a sqlDataSource to read my query and to put the rows into a gridview. Now I want to read just a couple of rows from my query based on a maximum number, also defined in the table. I have absolutely no idea how to do that..for example: I want to view only the 10 most recent subsciptions into my gridview. The subscriptions are stored into tabel Subscriptions which has values id, userid,date. Table Event has a parameter "maximum subscriptions" (which is 10 in my example) I hope it is clear enough?Thank you in advance!BlueiVeinz

View Replies !

Changing Parameter In SQLDataSource For Multiple DropDowns
I have one page, one connection, and three dropdowns. The connection looks like (as an example):<asp:SqlDataSource ID="DropDownConn" runat="server" ConnectionString="<%$ ConnectionStrings:aousConnectionString %>" SelectCommand="SELECT [Value], [Text] FROM [DropDown] WHERE (([Group] = @Group) AND ([Viewable] = @Viewable))"> <SelectParameters> <asp:Parameter Name="Group" Type="String" /> <asp:Parameter DefaultValue="True" Name="Viewable" Type="Boolean" /> </SelectParameters></asp:SqlDataSource>
The DropDowns Look like this:
<asp:DropDownList ID="DropDown1" runat="server"></asp:DropDownList><asp:DropDownList ID="DropDown2" runat="server"></asp:DropDownList><asp:DropDownList ID="DropDown3" runat="server"></asp:DropDownList>The C# Code I am trying is like this:DropDownConn.SelectParameters["Group"].Equals("DropDown1");DropDownConn.SelectParameters["Viewable"].Equals(true);DropDown1.DataSourceID = "DropDownConn";DropDown1.DataTextField = "Text";DropDown1.DataValueField = "Value";DropDown1.DataBind();
As an example. I can not get it done so that I don't have to create 3 dataconnections. Any help, PLEASE?

View Replies !

Select Command Lost Thus Gridview Shows Nothing
Hi there,I am not sure how many of you have experienced this problem before but here is how to replicate it: Add a GridView, SqlDataSource and Button to a new projectSet the DataSourceID to the SqlDataSource objectSet AllowPaging to True on the GridViewWithin the Button1_Click sub, change the SqlDataSource.SelectCommand to a new Query e.g SELECT * FROM table WHERE ID > 1Run the project Click on another page, i.e. "3" on the GridView SqlDataSource.SelectCommand is now blank(!), thus Gridview displays nothing. Has anyone else found a solution to this annoying issue? Any help is appreciated.Regards

View Replies !

Gridview Select Statement With User.identity.name In The Where Clause
Hello everyone,
I have a view, NAS_vPosition that has a coloumn vLogin_Acting and I want to use the user.identity.name to select the row from this table that matches.
So far i have tried:
SelectCommand = "Select * FROM NAS_vPosition WHERE vLogin_Acting = ' <%=User.Identity.Name %> ' "
with no success.
Any help is appreciated

View Replies !

Need Gridview To Display Different Columns Based On New SELECT Statement
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 â€“ the gridview should show those 4 columns. The second time the user selects columns 2,5,7 â€“ the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad

View Replies !

[ask] How To Append String To The Previous Select Statement Bounded To Gridview
i have a case : i'm using a select statement with SqlCommand and save the results in the SQLDataAdapterand using the data table I post the result to the gridview and show it there....my question is what should I do to append string to the SQL Command??

View Replies !

Want Error Message To Appear When No Database Results Were Returned In GridView, Also Other GridView Issues.
Hi, I am seeking a hopefully easy solution to spit back an error message when a user receives no results from a SQL server db with no results. My code looks like this What is in bold is the relevant subroutine for this problem I'm having. Partial Class collegedb_Default Inherits System.Web.UI.Page Protected Sub submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] WHERE [name] like '%" & textbox1.Text & "%'" SqlDataSource1.DataBind() If (SqlDataSource1 = System.DBNull) Then no_match.Text = "Your search returned no results, try looking manually." End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End Sub Protected Sub reset_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles reset.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End SubEnd Class I'm probably doing this completely wrong, I'm a .net newb. Any help would be appreciated. Basically I have GridView spitting out info from a db upon Page Load, but i also have a search bar above that. The search function works, but when it returns nothing, I want an error message to be displayed. I have a label setup called "no_match" but I'm getting compiler errors. Also, next to the submit button, I also have another button (Protected sub reset) that I was hoping to be able to return all results back on the page, similar to if a user is just loading the page fresh. I'd think that my logic would be OK, by just repeating the source code from page_load, but that doens't work.The button just does nothing. One final question, unrelated. After I set this default.aspx page up, sorting by number on the bottom of gridview, ie. 1,2,3,4, etc, worked fine. But now that paging feature, as long with the sorting headers, don't work! I do notice on the status bar in the browser, that I receive an error that says, "error on page...and it referers to javascript:_doPostBack('GridView1, etc etc)...I have no clue why this happened. Any help would be appreciated, thanks!

View Replies !