MS SQL Server :: Delete SP Not Firing?

Only One Of My SQL Delete Statement Are Firing
Hey guys...
I am trying to tidy up my code a bit and have one SQL command (Sub class) to call when needing to insert, update, delete and select.
I have got one class I am testing with that delete from a table support_ticket and then calls RunSQL() again to delete the corresponding tickets in Support_Reply.
however it only seems to want to delete from one table at a time...as i commented out the first sql and it worked and the second fires...but if the first one is active it doesnt fire.
Do anyone on the forum know why this has happened?

Sub DeleteUserTicket(sender as Object, e as EventArgs)
Dim strSQL1 = "DELETE FROM Support_Ticket WHERE (TicketID = " & txtticketID & ")"
RunSQL(strSQL1)
strSQL1 = "DELETE FROM Support_Reply WHERE (TicketID = " & txtticketID & ")"
RunSQL(strSQL1)
End Sub
'One class to run the sql statements for the entire page this will reduce in repetitve code as well as reduce code size
Sub RunSQL(strSQL)
Dim objCmd As SqlCommand
Dim sqlConn = New SqlConnection(strConn)
objCmd = New SQLCommand(strSQL, sqlConn)
objCmd.Connection.Open()
'Check that the rows can be deleted if not then return a error.
Try

objCmd.ExecuteNonQuery()
response.redirect("ticketsystemtest2.aspx")
Message.InnerHtml = "Ticket " & txtticketID & " Closed "
Catch ex As SqlException
If ex.Number = 2627 Then
Message.InnerHtml = "ERROR: A record already exists with " _
& "the same primary key"
Else

Message.InnerHtml = "ERROR: Could not update record, please " _
& "ensure the fields are correctly filled out " & ex.Message & " " & ex.Number
Message.Style("color") = "red"
End If
End Try
objCmd.Connection.Close()
sqlConn = nothing
objcmd = nothing
End Sub

cheers

View Replies !

Error W/ Trigger When Firing On 'DELETE XYZ WHERE IN (1,2,3)'
Hi,

Thanks for looking at this post. I currently have a trigger that fires when a row is inserted or deleted on a table. The idea behind the trigger is that when a row is inserted (representing a sub-category for images), the categories parent needs to have some work done on it. I currently have the trigger working just fine with single inserts and single deletes:

sql Code:

Original
- sql Code

CREATE TRIGGER smvcModImageManagerCategory_insert_delete_pdfManger_sync
ON smvcModImageManagerCategory
FOR INSERT, DELETE
AS
DECLARE @pdfId INTEGER;
DECLARE @parentPdfId INTEGER;
DECLARE @grandparentPdfId INTEGER;
DECLARE @parentId INTEGER;
DECLARE @grandparentId INTEGER;
DECLARE @tableName VARCHAR( 255 );

-- If I am being inserted or deleted, and I am not a top level
-- category, then my parent's pdf record needs to be set so that
-- the pdf file is updated
IF (SELECT id FROM Inserted) IS NOT NULL
BEGIN
SELECT @pdfId = (SELECT pdfManagerId FROM Inserted),
@parentId = (SELECT parentCategory FROM Inserted),
@grandparentId = (SELECT parentCategory FROM smvcModImageManagerCategory
WHERE id = @parentId);
END
ELSE
BEGIN
SELECT @pdfId = (SELECT pdfManagerId FROM Deleted),
@parentId = (SELECT parentCategory FROM Deleted),
@grandparentId = (SELECT parentCategory FROM smvcModImageManagerCategory
WHERE id = @parentId)
END

-- If I am not a top level category, set my parent's pdf to be
-- updated
IF @parentId <> -1
BEGIN
SELECT @parentPdfId = (SELECT pdfManagerId
FROM smvcModImageManagerCategory
WHERE id = @parentId);
UPDATE smvcModPdfManager SET data_last_updated = GETDATE()
WHERE id = @parentPdfId;
END
GO

CREATE TRIGGER smvcModImageManagerCategory_insert_delete_pdfManger_syncON smvcModImageManagerCategoryFOR INSERT, DELETEAS DECLARE @pdfId INTEGER; DECLARE @parentPdfId INTEGER; DECLARE @grandparentPdfId INTEGER; DECLARE @parentId INTEGER; DECLARE @grandparentId INTEGER; DECLARE @tableName VARCHAR( 255 ); -- If I am being inserted or deleted, and I am not a top level -- category, then my parent's pdf record needs to be set so that -- the pdf file is updated IF (SELECT id FROM Inserted) IS NOT NULL BEGIN SELECT @pdfId = (SELECT pdfManagerId FROM Inserted), @parentId = (SELECT parentCategory FROM Inserted), @grandparentId = (SELECT parentCategory FROM smvcModImageManagerCategory WHERE id = @parentId); END ELSE BEGIN SELECT @pdfId = (SELECT pdfManagerId FROM Deleted), @parentId = (SELECT parentCategory FROM Deleted), @grandparentId = (SELECT parentCategory FROM smvcModImageManagerCategory WHERE id = @parentId) END -- If I am not a top level category, set my parent's pdf to be -- updated IF @parentId <> -1 BEGIN SELECT @parentPdfId = (SELECT pdfManagerId FROM smvcModImageManagerCategory WHERE id = @parentId); UPDATE smvcModPdfManager SET data_last_updated = GETDATE() WHERE id = @parentPdfId; ENDGO

However, when I execute a statement like:

sql Code:

Original
- sql Code

DELETE FROM smvcModImageManagerCategory WHERE (smvcModImageManagerCategory.id IN ('86','87','88','90','91'))

DELETE FROM smvcModImageManagerCategory WHERE (smvcModImageManagerCategory.id IN ('86','87','88','90','91'))

I get an error because the virtual 'Deleted' table has more than one record in it. So, what I really need is advice on how to turn the above trigger into something that will be able to handle multiple deletes.

Thank you.

View Replies !

Trigger Not Firing On Cascade Delete Table
I have three tables:
BulkMemberHeader - which has a cascade delete on BulkMemberDetail of any related records
BulkMemberDetail €“ which has a DELETE trigger which gets the member ID from deleted and deletes the member record from the member table
Member

This issue:
> When I delete a record from BulkMemberDetail the trigger fires and deletes the record from the Member table as it should
> If I delete a record from the BulkMemberHeader, all corresponding records in BulkMemberDetail are deleted, but the trigger to delete the record in the Member table does not seem to fire

Is it a limitation on SQLServer 2000 that does not allow triggers to fire in a scenario like this?

Any suggestions or comments would be great.

Thanks,

Mike

View Replies !

Trigger Firing And Not Firing
I have a trigger on a table that just updates a last_modified_date and this works fine on our production server. Now I have to update some data and I do not want the trigger to fire. I cannot disable or drop the trigger because the productions systems needs the trigger. Anyone an idea of how to solve this problem?

View Replies !

SQLdatasource Not Firing
I have a datasource on my page, not connected to anything. In the selected event, I have the following:protected void InitializedDatasource_Selected(object sender, SqlDataSourceStatusEventArgs e)
{int total = e.AffectedRows;
lblInitialized.Text = total.ToString();
}
Howevever, because it's not attached to a gridview or anything, it seems the selected event never fires. How would i get it to run on page load?

View Replies !

Trigger Not Firing
OK, I'm at a loss..it must be staring me right in the face.

I have a junction table that relates 2 tables, with a unique key of the composit of the 2 keys. There is also an indicator that says 1 relationship between the 2 tables is "primary" and there should only be one of those. So I figured a trigger to take care of it...but I can't seem to get it working...I wrote sample sql to mimic the inserted table as well, and it seems correct, but the trigger just does not fire.

Any ideas?

CREATE TABLE [dbo].[PIF_MEP99] (
[PIFRecID] [int] NOT NULL ,
[MEPRecID] [int] NOT NULL ,
[PrimaryInd] [char] (1) NOT NULL
) ON [PRIMARY]
GO

ALTER TABLE [dbo].[PIF_MEP99] WITH NOCHECK ADD
CONSTRAINT [PIF_MEP99_PK] PRIMARY KEY CLUSTERED
(
[PIFRecID],
[MEPRecID]
) ON [PRIMARY]
GO

INSERT INTO PIF_MEP99(PIFRecID, MEPRecID, PrimaryInd)
SELECT 1,1,'Y' UNION ALL
SELECT 2,1,'N' UNION ALL
SELECT 3,2,'N'
GO

CREATE TRIGGER dbo_PIF_MEP99_tr_Rule1 ON dbo.PIF_MEP99
FOR UPDATE, DELETE
AS
SET NOCOUNT ON

-- Rule 1: Prevent and MEP from having more than 1 PIF as Primary

IF Exists ( SELECT * FROM inserted i
INNER JOIN PIF_MEP99 p
ON i.MEPRecID = p.MEPRecID
AND i.PrimaryInd = 'Y'
AND p.PrimaryInd = 'Y')
BEGIN
ROLLBACK TRAN
RAISERROR 500003 'Attempting to Insert 2 Primary PIFs for an MEP'
END
GO

SELECT * FROM PIF_MEP99
GO

SELECT * FROM (SELECT 4 AS PIFRecID,1 AS MEPRecID,'Y' AS PrimaryInd) AS i
INNER JOIN PIF_MEP p
ON i.MEPRecID = p.MEPRecID
AND i.PrimaryInd = 'Y'
AND p.PrimaryInd = 'Y'
GO

BEGIN TRAN
INSERT INTO PIF_MEP99 (PIFRecID, MEPRecID, PrimaryInd) SELECT 4,1,'Y'
COMMIT TRAN
GO

SELECT * FROM PIF_MEP99
GO

SELECT * FROM (SELECT 5 AS PIFRecID,1 AS MEPRecID,'Y' AS PrimaryInd) AS i
INNER JOIN PIF_MEP p
ON i.MEPRecID = p.MEPRecID
AND i.PrimaryInd = 'Y'
AND p.PrimaryInd = 'Y'
GO

DROP TABLE PIF_MEP99
GO

Brett

8-)

Hint: Want your questions answered fast? Follow the direction in this link
http://weblogs.sqlteam.com/brettk/archive/2005/05/25/5276.aspx

Add yourself!
http://www.frappr.com/sqlteam

View Replies !

Trigger Not FIRING With BCP
Hi,

Anyone got an idea why this does not work. I have a trigger that is supposed to fire as an INSERT is done on a table. If I manually insert (insert into....), the trigger fires. If I use BCP to insert, the trigger DOES NOT FIRE.....

Davy

View Replies !

Firing Triggers Within DTS
My working environment exist of Win 2000 advance server w/service pack 1 and
SQL 2000 Enterprise no service pack applied.

I created trigger on INSERT table "A" which have to insert record
into table "B". The trigger fired when records inserted by insert statement from Query Analyzer. But the trigger doesn't s not fired if I moved records from text file into table "A" using DTS Import/Export Wizard.

How can I make it work.

Thank you.

View Replies !

Firing DTS Package From An ASP
Does anyone here know of a way to execute a DTS package from an ASP that works? I have been using a variation on Microsoft's example that has yet to work.

I know that this code is getting a handle to both the package object and the task object because it recognizes if I have them spelled incorrectly and gives me an error.

On the other hand when everything is correct it simply claims to execute but nothing really happens... My screen will read
Executing...
Done.

The script goes something like this, any suggestions?:

Const DTSReposFlag_Default = 0
Const DTSReposFlag_UseTrustedConnection = 256
Dim oPackage, strResult
Dim oPump
Set oPackage=Server.CreateObject("DTS.Package")
oPackage.LoadFromSQLServer "hoaorg10","","",DTSReposFlag_UseTrustedConnection ,"","","","DirCopy"
set oPump = oPackage.Tasks("Copy Data from Results to [lhr2000].[dbo].[Households] Task").CustomTask
oPump.SourceSQLStatement = "SELECT * FROM HOREFPA WHERE NEIGHBORHOOD = 'testnbhd'"
oPackage.Execute
Response.Write "Executing package... "
For i = 1 To oPackage.Steps.Count
If oPackage.Steps(i).ExecutionResult = DTSStepExecResult_Failure Then
oPackage.Steps(i).GetExecutionErrorInfo lpErrorCode
iStatus = False
strErr = oPackage.Steps(i).Name + " in the " + oPackage.Description + " failed. "
End If
Response.Write strResult
Next
If iStatus = True Then
strResult = oPackage.Description + " Successful "
Response.Write strResult
End If
Response.Write "Done. "

View Replies !

Trigger Not Firing ...
Afternoon All ...

I have a trigger on a table that works great when a single record is updated BUT it seems not to fire when I try to do a bulk update as in ...

update TableA

set field3 = ms.field3
FROM TableA as ta,
#ms as ms
where field1 = ms.field1
and field2 = ms.field2

Why does this happen and how can I correct it.

Thanks!

View Replies !

Trigger Not Firing

I have build a SQL Trigger that fires on the update of a specific column; this works perfectly when I test using SQL or even the SQL Server GUI but when I do the update from .NET it doesn€™t fire.

I have a dataset that gets modified and then I call sqlDataAdapter.Update(Dataset) - the row is successfully modified in the database but alas - the trigger isn't fired.

Any help would be appreciated.

View Replies !

Mail Is Not Firing
I have a job that fires every 15 minutes. Job is working.
I looked in here
select * from msdb.dbo.sysmail_allitems
records are in here...

I looked in here and
select * from msdb.dbo.sysmail_log it says the database mail is
2008-06-24 14:46:10.997DatabaseMail process is started
2008-06-24 14:56:13.453DatabaseMail process is shutting down
Which it seems to do periodically ....through out the log

What starts up the process - to go run the email alerts.

View Replies !

SP Not Firing In Foreach Loop
The foreach loop below runs fine and it sends emails as expected but the SP does not update the Companies table. Any thoughts?  How do I cause the SP to execute?
PROCEDURE newdawn.EmailSentDate      @CID intAS     UPDATE Companies      SET Companies.LastEmailDate = (GetDate())     WHERE tblCompanies.C_ID = @CID RETURN
foreach (GridViewRow row in GridView3.Rows)        {            pstrTo = row.Cells[2].Text;            CEmail = row.Cells[2].Text;            CName = row.Cells[3].Text;            CID = row.Cells[1].Text;            CState = TextBox1.Text;            CCity = row.Cells[5].Text;            CCat = row.Cells[4].Text;            CCID = row.Cells[0].Text;
            SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString);            SqlCommand cmd = new SqlCommand("EmailSentDate", con);            cmd.CommandType = CommandType.StoredProcedure;            cmd.Parameters.AddWithValue("@CID", CCID);                                    try            {                System.String mailServerName = "mail.domain.com";
                               REST of code sends email to email address found in each row ....it all works find but SP above does not fire.

View Replies !

Firing Already Made DTS Package -- From Vb.net
Someone please help me with this.
I'm trying to fire off an already created DTS package. This package is stored within SQL Server's -- underneith the Data Transformation Services / Local Packages section.
HOW CAN I FIRE THIS OFF FROM A VB .NET APPLICATION
I'm familiar with strored procedures and using them in vb.net so if somone could lead me down that road I would be very much appriciated.
Thanks in advance everyone,
RB

View Replies !

Trigger Not Firing On Update
hi,Here's the scenario1) I am running a DTS job to fetch some rows from Oracle2) The job populates the Table A as step 13) Then it fires a update statement which updates the rows in Table B.Here's the statementUPDATE Table B SETtime = case when (select median from Table A where sno = sno and TableA.stno=70 ) is null then timeelse (select median from Table A where Table B.sno = Table A.sno andTable A.sstno=70) end ,endWHERE EXISTS (select sstno from Table A where Table B.sno = TableA.sno)There is a trigger on table B which should fire as soon as thevalue>15.When I fire the update statement direcly with a higher value than itfires the trigger.update table B set time=17 where b.sno=1000But not when the job runs...I am puzzled.Thoughts?AJ

View Replies !

Firing Triggers From 1 SQL Server To Another
Hi All,Currently we have two databases both running on the same Install andMachine under MSSQL, one of these database's has two triggers thatfire to update some tables on the other database, pretty normal uptonow.The problem: we are looking to move one of the databases to anotherinstance of MSSQL on a different machine, different workgroup,different location (separate installs of MSSQL). The only linkingfactor being that both locations are connected and we can see bothworkgroups from either location.The reason: Being that the point in doing this is that at the minutethe other location have to connect via the web to access the databasethat is solely for their work purposes, so we are moving to them,however we update it with some data on one of our databases via twotriggers.I would really appreciate it if somebody could help me with this, witheither;*Explaining how i can write the trigger to do cross netowrk stuff.*Setting up Remote / Linked Servers correctly*Or anything anyone else can suggest.Relativly new to doing this stuff in SQL, and would be glad for thehelp.Sway

View Replies !

Trigger Not Firing, DTS Load
I have a table that is getting refreshed from DB2 using DTS (I believe the DBA is doing a DELETE and an APPEND). I have a trigger on this table ON APPEND, INSERT, but the trigger never fires. When I manually update the data, the trigger fires no problem...

Is DTS capable of updating a SQL Server table without firing the trigger?

I'm an Oracle guy, and this is my 1st experiences with SQL Server, so I'll put the code here and if you want to point out any bad practices (such as the way i converted the DB2 TIMESTAMP to a SQL Server DATETIME , please do.

FYI, the DB2 TIMESTAMP is getting loaded into the SQL Server table as a VARCHAR(26)
Carl

CREATE TRIGGER trig_SAWakeUp ON tsnro
FOR INSERT, UPDATE
AS
DECLARE @snro_stus char(10)
DECLARE @snp_sht_dtm as datetime
SELECT @snro_stus = snro_stus
FROM tsnro
IF (RTRIM(@snro_stus) = 'ASSIGNED') OR (RTRIM(@snro_stus) = 'REFRESHED')
BEGIN
SELECT @snp_sht_dtm = CONVERT(DATETIME, SUBSTRING(evt_dtm,1,19))
FROM tsnro

INSERT INTO TSNP_SHT_DTM (SNRO_STUS, SNP_SHT_DTM )
VALUES (@snro_stus, @snp_sht_dtm)
END
ELSE
BEGIN
INSERT INTO TSNP_SHT_DTM ( SNRO_STUS, SNP_SHT_DTM )
VALUES (@snro_stus, @snp_sht_dtm)
END

View Replies !

Insert Trigger Sometimes Not Firing
hi all

i have an issue with an insert trigger sometimes not firing.

here is the trigger

CREATE TRIGGER Insert_tPABillToAddr ON [dbo].[tPA00175]
FOR INSERT
AS

INSERT into tPABillToAddr
(
chrJobNumber
)

SELECT chrJobNumber
FROM inserted

when the user enters a new this table is to insert one column into another table. the thing is, sometimes it does not do the insert. any ideas as to why? it is a very uncommon thing, lets say once out of every 20 inserts does it fail. but it is crucial that it never fails.

thanks

View Replies !

Prevent Trigger From Firing
Hi,

I have an update tigger on one of my tables.
I want to fire an Update SQL but somehow prevent trigger from firing.

Any Ideas..

View Replies !

Alert Deleted But Still Firing
I created an alert (18453) to audit successful logins. After I was done with the alert I made I edited the alert 18453 to disable event log logging and then deleted the alert. My problem is that the alert is deleted but it continues to log to the SQL Server error log and the windows application log. I have tried restarting the SQL Server Agent and even had the server rebooted over the weekend. Has anyone else had this problem? Where is this configured and how can I disable it?

View Replies !

Artificially Firing A TRIGGER
I have a table (table 1) that has a trigger attached to it, which sends data to table 2. Both tables are attached to an appliction.

In theory, the trigger populates table 2 (from table 1) from the data entered from the user interface application.

But when I import data from the backend

via DTS into Table 1, the trigger does not send the data to table 2.

What do I need to do ???

Thank you in advance !!

View Replies !

EventHandlers Firing Events
I ran into a pretty bizzare behavior in SSIS:

I am trying to set up a package with a built-in auditing. It has a OnPreExecute, OnPostExecute and OnError event handlers. I am trying to record when the package starts, completes, and the completion status. Each one of these event handlers has a script task that does the logging. I put in debug message boxes into each event handler script to understand what goes on. So here's the sequence of events:

1. When starting the package the OnPreExecute event fires. Right away it fires the second time. I'm guessing what happens here is the script task within the event handler fires its own OnPreExecute event - that's how the first message really pops up. The second message is generated by the actual package-level OnPreExecute event.

2. I have a condition within the OnPreExecute event handler which might set the task status to failure. You would expect the OnError handler to fire, right?.. Wrong! The package dies without firing either OnError or OnPostExecute event....

3. If i remove the condition in step 2, and force an error in the package body, i get an OnError event, and then 2 OnPostExecute events ( i guess for the same reason as in step 1).

What I'm trying to understand is why in the world my OnPreExecute and OnPostExecute events get fired by their own event handlers, yet when i fire other events within these event handlers the appropriate (other) event handler does not run.

Any ideas will be greatly appreciated.

View Replies !

OnInformation Event Firing Twice?
In my SSIS package (which was created programatically) when I try to log details in OnInformation event I get all the entries twice. One with the source name as the taskhost.name property and another with a guid. I'm not able to figure out which component raises the event. Infact for all the events the sourcename comes as GUID.

So I thought I'll override the events by inheriting IDTSEvents or DefaultEvents, But I'm not sure how to proceed further so that I can pass the sourcename properly instead of GUID.

Code BlockIDTSLogging.Log(string eventName, string computerName, string operatorName, string sourceName, string sourceGuid, string executionGuid, string messageText, DateTime startTime, DateTime endTime, int dataCode, ref byte[] dataBytes)

Thanks

View Replies !

Activated Proc Not Firing.
Hi There

I just had the following scenario.

I checked sys.service_queues to confirm the my queue has an activated proc assigned to it and is activation_enabled.

I send messages to the service, however i see that the messages just sit in the queue. I run profiler with all SB and Error events there is nothing, i check the sql server log, there is also nothing.

So i have no idea why the activated proc is not firing, all i see in the profiler trace is that the messages are acknowledged but the activated proc does not execute.

For a while i was stumped. i then tried to execute the proc myself and i got a syntax error.

Basically what happened was that i altered a table that the proc used and now the proc cannot execute cos there are more columns that must be inserted so i altered the proc.

However the activated proc still did not fire.

I had to disable and re-enable activation for it to work.

What i am wondering is why was there no indication in profiler or the sql og as the the fact that something was wrong with the activated proc ? Surely the activated proc should have fired and given the same error i got either to the sql log or profiler ?

And why did i have to re-enable activation ? Does sql cache the proc when you activate it and not know that the proc has changed when you alter it ?

Thanx

View Replies !

SqlDependency.OnChange() Not Firing
I am running

ALTER DATABASE dbname SET ENABLE_BROKER

on my app startup and then SqlDependency.Start(), and then the following code

SqlCommand cmd = con.CreateCommand();

cmd.CommandText = "SELECT request_queue.track_id, track.file_name, track.track_number, track.track_name, " +

"artist.artist_id, album.album_id, artist.artist_name, album.album_name " +

"FROM dbo.request_queue INNER JOIN track on request_queue.track_id=track.track_id " +

"inner join artist on track.artist_id=artist.artist_id " +

"inner join album on track.album_id=album.album_id";

cmd.CommandType = CommandType.Text;

if (con.State != ConnectionState.Open)

con.Open();

dep = new SqlDependency(cmd);

dep.OnChange += new OnChangeEventHandler(dep_OnChange);

SqlDataReader rdr = cmd.ExecuteReader();

List<Track> l = new List<Track>();

while (rdr.Read())

{

Track t = new Track();

t.TrackID = (int)rdr["track_id"];

t.Filename = (string)rdr["file_name"];

if (rdr["track_name"] != DBNull.Value)

t.TrackName = (string)rdr["track_name"];

t.TrackNumber = (int)rdr["track_number"];

l.Add(t);

}

rdr.Close();

and for some reason, after i do multiple changes to the request_queue table, (adding rows), the dep_on_change never fires, and if i check dep.HasChanges it is always false.

View Replies !

Update Trigger Not Firing.

Hi All,

I have an update trigger which stores the date a record was updated by a GIS app.

It worked in SQL2000 but when I copied and pasted the code into SQL2 its not firing. Any Ideas? Below is the code.

Create TRIGGER [dbo].[Date_Entered] ON [dbo].[ZONING_OP]

FOR UPDATE

AS

UPDATE [dbo].[ZONING_OP]

Set Date_Entered = GetDate()

Where ID = (Select ID from Inserted)

View Replies !

Sql 2005 Scheduled Job Not Firing
Setting: sql 2005, SP1.

I created a new job (under SQL Server agent) which runs a simple ActiveX script. When run interactively, the job runs fine. But when run under the scheduler the job fails to even start. There is no error message and "History" makes no reference at all to the job run. I checked, the job is enabled. Any thoughts much appreciated.

TIA,

barkingdog

View Replies !

SqlDataSource OnSelected Event Not Firing
Hi,
I have a SqlDataSource whose select statement uses parameters from the selected row on a gridview on the page. So when a row is selected in the gridview, I want the SqlDataSource to do a select using the new parameters, and then I want to inspect the number of rows returned. If 0, I want to set a FormView to insert mode, if >0 I want to set the FormView to edit mode.
The "SqlDataSource2_Selected" sub never fires, so I cannot retrieve the number of rows returned. How can I deal with this? I would like the SqlDataSource to execute a Select each time the Gridview selected row changes. What could prevent "OnSelected" from firing?
I do have "OnSelected="SqlDataSource2_Selected" within the SqlDataSource tag.
Thanks in advance for any help with this.

View Replies !

Sqldatasource Selected Event Not Firing?
Using Sql server 2005, SQLdatasource, I need to display total rows count. But the selected event is not fired? Am I mssing something or doing something wrong? Please comment. thanks
Code<asp:SqlDataSource ID="DataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:AuditToolConnection%>"
ProviderName="System.Data.SqlClient"SelectCommandType="StoredProcedure"
SelectCommand="usp_Dashboard_GetAll" >
--------------------------------
public in recordCount = 0;protected void DataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e)
{
recordCount = e.AffectedRows;
lblCount.Text += recordCount.ToString();
}

View Replies !

Sqldatasource Onselected Event Not Firing
Hi All - I've got a simple gridview/sqldatasource page, but the sqldatasource_onSelected event isn't firing.
heres the parameters <SelectParameters>
<asp:QueryStringParameter Name="LicenceID" QueryStringField="LicenceID" Type="string" />
<asp:QueryStringParameter Name="SiteID" QueryStringField="SamplingSiteID" Type="string" />
</SelectParameters>

either or both parameters may be null (ie. not in querystring ) .
If only one of the selectparameters is null, and I remove it, the event fires!!!
The parameters in the stored proc are optional(ie. default = NULL) and it works fine if I test it in SQL .
Whats going on? If there's some error happening, why no error raised? if there are no records returned, the onselected event should still fire shouldn't it?
Geoff

View Replies !

Firing DTS Through Window Based Forms In VB.net
Here is what I've got so far...for some reason it's not firing off:
<code>
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim dtsp2 As New DTS.Package
dtsp2.LoadFromSQLServer("jfgp34", "sa", "@jfgp#1", DTS.DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, "", "", "", "Test Northwind", "")
dtsp2.Execute()

End Sub
</code>
Any one with ideas helps out alot. Thanks in advance everyone.
RB

View Replies !

AFTER INSERT Trigger Not Firing In SQL 2005
Nothing fancy; just a trigger on a sharepoint table that supposed towrite a record to another SQL table.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER TRIGGER [TV_UpdateFileSyncProgress]ON [dbo].[Docs]AFTER INSERTASBEGINSET NOCOUNT ON;BEGINIF EXISTS (SELECT null FROM inserted WHERE DirName like'csm/%/Shared Documents')BEGINIF NOT EXISTS (SELECT null FROM inserted INNER JOINTV_FileSyncProgress fp ON LOWER(RTRIM(fp.LeafName)) =LOWER(RTRIM(Replace(Replace(inserted.DirName,'csm/',''),'/SharedDocuments','') + '' + inserted.LeafName)))BEGININSERT INTO TV_FileSyncProgress (InternalOrigin, ExternalOrigin,ChangeType, SiteId, DirName, LeafName, FlagForDelete)SELECT0,1,1,SiteId,'F:commonExtranet',Replace(Replace (DirName,'csm/',''),'/SharedDocuments','') + '' + LeafName,0 FROM insertedENDENDENDEND

View Replies !

Create Trigger Not Firing Via ODBC
I created a trigger in the "source table" that will "feed" and secondtable. The trigger is as follows:CREATE TRIGGER [FeedToP21] ON dbo.FromUPSFOR INSERTASDeclare @Count intSelect @Count = Count(*) from InsertedIf @Count > 0BeginInsert into ToP21Select i.* From Inserted iLeft Join ToP21 ton i.recnum = t.recnumWhere t.recnum is nullEndIf @@ERROR != 0Rollback TranA record was created in the "source table" via ODBC, however, thetrigger does not seem to have fired to create the record in the secondtable.If I create a record manually using SQL Server Enterprise Managerwithin the "tableview" the trigger fires and a duplicate record iscreated in the second table.Is there a fix for this problem?Thank you in advance.

View Replies !

UPDATE Trigger Firing Too Late?
Hi. This SHOULD be something simple, but I am apparently missing something. I have a Users table where a user's status is a varchar(100). I'm trying to implement a trigger so that when a user's status is changed to any string other than what it was before the update the trigger would change the LastUpdated field to current date/time.

Here's the trigger, I replaced the update of LastUpdated with a simple print statement. For some reason, it seems like the trigger is firing after the update statement has committed because the values of @m_status_new and @m_status_old are always the same so this trigger always prints 'status has not changed.' What am I doing wrong? Thank you greatly for any help provided.

USE myDB
IF EXISTS (SELECT name FROM sysobjects
WHERE name = 'tr_update_users' AND type = 'TR')
DROP TRIGGER tr_update_users
GO

CREATE TRIGGER tr_update_users
on dbo.Users
FOR UPDATE
AS

DECLARE @m_status_new varchar(100),
@m_status_old varchar(100),
@m_UserID int

SELECT @m_status_new = UserStatus,
@m_UserID = UserID
FROMinserted

SELECT @m_status_old = UserStatus
FROMUsers
WHEREUserID = @m_UserID

IF @m_status_new != @m_status_old
BEGIN
print 'status has changed'
END
ELSE
BEGIN
print 'status has not changed'
END
GO

View Replies !

UPDATE TRIGGER WITHOUT RECURSIVE FIRING
I have an update trigger I created that updates a field based on the user who last updated the record. Under 7 the only way it would work was to have recursive triggers firing turned on. Under 2000 might there be a btter solution. The code is below. Thanks

CREATE trigger tr_cmsUpdt_MARS on dbo.PATIENT_MEDICATION_DISPERSAL_ for UPDATE as
-- updates record with sql user and timestamp
--created 11-28-00 tim cronin
DECLARE @muser varchar(35),
@rec_lock_status int,
@ptacpt_status int
set @muser = current_user
begin
UPDATE PATIENT_MEDICATION_DISPERSAL_
set MODIFIED_BY = @muser,
MODIFIED_TS = getdate()
from deleted dt
WHERE --DT.MODIFIED_BY <> 'DBO' AND
PATIENT_MEDICATION_DISPERSAL_.RECORD_ID = dt.RECORD_ID
end

View Replies !

SQL 7 Alert Not Firing. Somewhat Urgent... Deadlines!
I have set up an alert in sql 7 for error #9002 (log file full) for a particular database. I have a job assigned to run when the alert fires. It appears that I have done everything 'by the book', but when I run an insert that causes the log file to fill... the alert does not fire. I have checked everything I can think of:

- the alert is enabled
- the 9002 message is being logged in the NT event log
- slq server agent is running

what am i missing?

thank you in advance to anyone who can help.

View Replies !

Backup Database Failure Is Not Firing
I created a transaction log backup database maintenance task which then flows to a notification task if a failure occurs. If I set the backup path to a path that does not exist on databases that are set to simple (which should also cause it to fail I would expect, since you can not backup transaction logs on a simple recovery model database) it just succeeds and does not go to the notification task.

Why?

View Replies !

SqlDataSource Selecting/Selected Events Not Firing
Hi,I have a SqlDataSource and am trying to establish if it returns rows using the selected event e.AffectedRows statement. Unfortunately the selected event does not fire. I am using a stored procedure with 2 parameters:applicantID - Int32 - Parameter source from control label textissueStatus - Int16 - Parameter source 'None' default value = 1 When i test it during configuration it returns 1 row as expected. I am manually running the DataSource using ds.DataBind(); after a button click. Anyone know why its not firing the event?Thanks

View Replies !

Firing A Java Application From Stored Procedure
Hey all,
I've got a question and after doing some research I've found only a vague reference but no clear answer.

I have a java app that will be passing parameters to my stored procedure. I'll grab the requested info from the tables but instead of sending it back to the java app that sent the request, I need to send it to a "different" java app (the second java app will not be running at the time).

Can someone point me to a good source for executing java applications from a stored procedure?

Thanks in advance ...
tam

View Replies !

Problem With IF Statement - Some Reason Not Firing Properly
Hi all, could someone be kind enough to provide me some help into why the following IF statement is not working? Basically, I am trying to find out whether a field in my database has a CONSTRAINT attached to it with a particular name... IF it does have one then drop it and re-create it ELSE simply create one.

I have used SELECT * FROM SYSOBJECTS to find whether it exists which according to the results it does EXIST, however my IF statement is not detecting it and I get an error which states:
Msg 1781, Level 16, State 1, Line 30Column already has a DEFAULT bound to it.Msg 1750, Level 16, State 0, Line 30Could not create constraint. See previous errors.

However, surely my IF statement is suppose to be handling this problem and therefore if it does EXIST THEN it should ideally drop the CONSTRAINT and then re-create it but this is not the case... instead the ELSE is always being triggered. After using SYSOBJECTS I copied it directly from the results view into my SQL but still for some reason if my constraint does exist it jumps to the ELSE.

Code SnippetIF EXISTS (SELECT * FROM SYSOBJECTS WHERE NAME = '[DF_TBL_SyncTable_OB-DEVUK]')
   BEGIN
       ALTER TABLE TBL_SyncTable DROP CONSTRAINT [DF_TBL_SyncTable_OB-DEVUK]
       ALTER TABLE TBL_SyncTable ADD CONSTRAINT [DF_TBL_SyncTable_OB-DEVUK] DEFAULT 2 FOR [OB-DEVUK]
       ALTER TABLE TBL_SyncTable ADD [OB-DEV6] TINYINT DEFAULT 2
   END
ELSE    BEGIN        ALTER TABLE TBL_SyncTable ADD CONSTRAINT [DF_TBL_SyncTable_OB-DEVUK] DEFAULT 2 FOR [OB-DEVUK]
       ALTER TABLE TBL_SyncTable ADD [OB-DEV6] TINYINT DEFAULT 2
   END


Thanks for replies + suggestions + comments

Regards, Onam.

View Replies !

Calling FileSystemWatcher From Sql05 Not Firing Events???
Have written a dll that has a number of mthds to create, start, stop, list, etc... a filesystemwatcher.
The dll attaches to sql fine.
The dll creates it's own eventlog scope (which does showup in the event log browser dialog). So I do know it is being instantiated...

can start a watcher, can list all watchers running...in listing them i call directly down into a hidden class that houses the FileSysWat object. The listing queries some properties of the FileSysWatcher object directly so I can see if it is truely running or not (aka: EnableRaisingEvents property, path property, subdirs property, etc...)

The dll is currently configured to write to the event log, AND fire a stored procedure in ea. callback...This is not working!!! Am never getting the EventLog Record nor the SP to fire...not exceptions being thrown...NOTHING!!!!

When I open a filemgr window and go into the directory being monitored, perhaps I'll rename a file, the FileSysWatcher isn't firing the registered callback (aka: fsw.Created += new System.IO.FileSystemEventHandler(somemthdhere))

The property EnableRaisingEvents is true.

Perhaps something unusual about being inside of the SqlServer.exe process I'm unaware of!?

any ideas or help would be great!!! Tried lots of different code config's...but callback's are not being called!!!

Again...I've wired up all avail callbacks: Created, Renamed, Deleted, Error. Nothing is Firing!!!

Am not setting any NotifyFilter bits (flags) as the ctor default(s) are fine for my needs...

-mt

View Replies !

OnError Event Firing Multiple Times
I have an SSIS package that contains a For Each Loop Container. I have three Data Flow tasks within the container. I have an OnError event handler associated with the encapsulating container. When one of the Data Flow tasks within the For Each Loop Container fails, the OnError for the Loop Container gets called 5 times. The OnError handler is just a script task that sends a notification email. I am not explicitly Dts.taskresult = failure, nor am I calling FireError.

View Replies !

Trigger Firing Multiple Stored Procedure
DESCRIPTION: I have an FTP server set up to log via ODBC into a table FTPLog. The trigger on table FTPLog fires when new files are received to process and load the file via a stored procedure.

CREATE TRIGGER tr_new_file ON FTPLog
AFTER INSERT
AS
SET NOCOUNT ON
DECLARE @filename varchar(50), @logtime datetime
DECLARE c1 CURSOR
FOR SELECT filename, logtime
FROM inserted
OPEN c1
FETCH NEXT FROM c1
INTO @filename, @logtime
WHILE @@fetch_status = 0
BEGIN
EXEC sp1 @filename, @logtime
FETCH NEXT FROM c_inserted
INTO @filename, @logtime
END
CLOSE c1
DEALLOCATE c1
END

PROBLEM: There are multiple problems with this setup. The first problem is that when the stored procedure gets executed it takes a long time to process the file and the FTP server never returned a completion code to the ftp client and ended with a connection time out from the client. My users keep asking if the FTP failed but it didnt fail. The server returned a completion code too late.

PROBLEM2: When multiple files are ftp to the server on the same session, only the first one gets process. Even though my code loops through all the records because the processing takes a long time the second one never gets executed. If I replace the EXEC sp1 statement with a PRINT statement then it's working fine.

SOLUTIONS and SUGGESTIONS highly appreciated.

View Replies !

Firing An Append Query(stored Procedure) On The First Of Very Month
I need several stored procedures to fire on the 1st of every month. I was told my another developer I can possibly use SQL sever agent.

Any ideas????

View Replies !

Package Level OnError Event Handler Not Firing (as If Not There)
Hi all,

I have a package on which i've applied a package level OnError event handler. The OnError event handler includes a Script Task (that builds up a string of errorCode, errorDescription, MachineName etc...) and a WebService Task that calls a webservice to send an email including the built up string from the script task in the body of the email. This has worked fine in one package where i've applied it but for some reason in a second package the existence of an OnError package level event handler seems to be completed ignored. I'm causing various package object to fail but the OnError handler never fires. I know the obvious answer is find what's different between the two packages but i can't see that any is different (in relation to package level OnError event handling).

Has anyone else come across this? Any suggestions?

Thanks

M.

View Replies !