MS SQL Server :: Gridview Select Statement With User.identity.name In The Where Clause

Need Gridview To Display Different Columns Based On New SELECT Statement
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 â€“ the gridview should show those 4 columns. The second time the user selects columns 2,5,7 â€“ the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad

View Replies !

[ask] How To Append String To The Previous Select Statement Bounded To Gridview
i have a case : i'm using a select statement with SqlCommand and save the results in the SQLDataAdapterand using the data table I post the result to the gridview and show it there....my question is what should I do to append string to the SQL Command??

View Replies !

GridView Based On SQLServerDataSource Using A Select Union Statement, Impacts On Update And Insert?
I have a GridView dispalying from a SQLServerDataSource that is using a SQL Select Union statement (like the following):

SELECT FirstName, LastNameFROM MasterUNION ALLSELECT FirstName, LastNameFROM CustomORDER BY LastName, FirstName
I am wondering how to create Update and Insert statements for this SQLServerDataSource since the select is actually driving from two different tables (Master and Custom). Any ideas if or how this can be done? Specifically, I want the Custom table to be editable, but not the Master table. Any examples or ideas would be very much appreciated!
Thanks,
Randy

View Replies !

IF Statement In SELECT WHERE Clause
Hi Everyone,

I have the following stored procedure, I would like to use
IF statement or something of the sort in the where clause i.e.
The last line in the SP is: AND (category.categoryID = @categoryID),
I only want to check this, if @categoryID is not = 12.
So can I do something like this:

IF @categoryID <> 12
AND (category.categoryID = @categoryID)

STORED PROCEDURE:

CREATE PROCEDURE sp_get_total_risk_patients
@categoryID int
AS

SELECT COUNT(DISTINCT patient.patientID) AS total_patients
FROM patient
INNER JOIN patient_record ON patient.patientID = patient_record.patientID
INNER JOIN sub_category ON sub_category.sub_categoryID = patient.sub_categoryID
INNER JOIN category ON category.categoryID = sub_category.categoryID
WHERE risk = 6
AND (completed_date = '' OR completed_date IS NULL)
AND (category.categoryID = @categoryID)

View Replies !

Use A Variable Along With The FROM Clause In SELECT Statement
I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.

What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).

This is the code in my procedure..

DECLARE @tab_list CURSOR
set @tab_list = CURSOR FOR select * from table_list
OPEN @tab_list

DECLARE @tab_name varchar(256)
DECLARE @rec_cnt int
FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt

select count(*) from @tab_name

This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.

Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.

Please help me to construct the select statement that is similiar to

x=<table name>
select * from x
where x is a variable and the table name gets substituted.

what is the syntax for it ?

View Replies !

Use Of User Defined In SELECT Clause
I'm having this query:SELECTss.subscription_id AS SubscriptionId,s.id AS ScopeId,s.[name] AS ScopeName,s.base AS ScopeBase,dbo.iqGetShapesByScopeAsString(s.id) AS ShapesAsStringFROMsubscription_scope ss,scope sWHEREss.subscription_id = @subscription_idANDss.scope_id = s.idORDER BYs.[name]The select only returns a single row but my database (SQL Server 2005CTP) seems to execute the "iqGetShapesByScopeAsString" function foreach row in the subscription_scope and scope tables. This is a bug,right? The function should be executed only once for each *returned*row in the SELECT, right? I believe that was the case in SQL 2k thoughI can't check it at the moment.// pt

View Replies !

Select Statement With A New Identity Field
Hello,
Is it possible to generate a identityfield dynamically upon select, like this:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC
I want the output to be:
1 - Name12 - Name23 - Name3
The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes.
Like:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC
I want the output to be:
1 - Name32 - Name23 - Name1

Patrick

View Replies !

Select Statement Using Multi-list Box Values For WHERE IN SQL Clause
I have a gridview that is based on the selection(s) in a listbox. The gridview renders fine if I only select one value from the listbox. I recive this error though when I select more that one value from the listbox:
Syntax error converting the nvarchar value '4,1' to a column of data type int. If, however, I hard code 4,1 in place of @ListSelection (see below selectCommand WHERE and IN Clauses) the gridview renders perfectly.
<asp:SqlDataSource ID="SqlDataSourceAll" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT DISTINCT dbo.Contacts.Title, dbo.Contacts.FirstName, dbo.Contacts.MI, dbo.Contacts.LastName, dbo.Contacts.Suffix, dbo.Contacts.Dear, dbo.Contacts.Honorific, dbo.Contacts.Address, dbo.Contacts.Address2, dbo.Contacts.City, dbo.Contacts.StateOrProvince, dbo.Contacts.PostalCode FROM dbo.Contacts INNER JOIN dbo.tblListSelection ON dbo.Contacts.ContactID = dbo.tblListSelection.contactID INNER JOIN dbo.ListDescriptions ON dbo.tblListSelection.selListID = dbo.ListDescriptions.ID WHERE (dbo.tblListSelection.selListID IN (@ListSelection)) AND (dbo.Contacts.StateOrProvince LIKE '%') ORDER BY dbo.Contacts.LastName">
<SelectParameters>
<asp:Parameter Name="ListSelection" DefaultValue="1"/>
</SelectParameters>
</asp:SqlDataSource>
The selListID column is type integer in the database.
I'm using the ListBox1_selectedIndexChanged in the code behind like this where I've tried using setting my selectparameter using the label1.text value and the Requst.From(ListBox1.UniqueID) value with the same result:

Protected Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
Dim Item As ListItem
For Each Item In ListBox1.Items
If Item.Selected Then
If Label1.Text <> "" Then
Label1.Text = Label1.Text + Item.Value + ","
Else
Label1.Text = Item.Value + ","
End If
End If
Next
Label1.Text = Label1.Text.TrimEnd(",")
SqlDataSourceAll.SelectParameters("ListSelection").DefaultValue = Request.Form(ListBox1.UniqueID)
End Sub
What am I doing wrong here? Thanks!

View Replies !

Trying To Use The Results Of A Case Statement In My Select List In My WHERE Clause?
I am fairly new with SQL and still learning. I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me. Here is the code I have so far:

SELECT
l.loanid,
p.investorid,
l.duedate,
case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate,
pc.interestrate
FROM loan l
inner join participation p on p.loanid = l.loanid
inner join paymentchange pc on pc.loanid = l.loanid
where p.investorid = '12345' and RateDueDate is not null
order by l.loanid, pc.duedate

I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table. Any help would be greatly appreciated.

Thanks!

View Replies !

SELECT @@IDENTITY During INSERT STATEMENT Error
The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:

"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"

Compact 3.5 doesnt like the SELECT statement claiming that:

There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]

Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?

I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.

View Replies !

Combing In A Cursor, A Select Statement With The WHERE Clause Stored In A Variable
Hi
I am ramesh here from go-events.com
I am using sql mail to send out emails to my mailing list

I have difficulty combining a select statement with a where clause stored in a variable inside a cursor

The users select the mail content and frequency of delivery and i deliver the mail

I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.

Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code
that does not work

For example

DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3

I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary

How do I combine the select statement with the where clause?

Help me...I need help urgently

View Replies !

Using The ORDER BY Clause When The Ordered Column Is Not Needed In The SELECT Statement
Greetings,

I have a C# application that calls a stored procedure to query the database (MSSQL 2005). I only have one field/column returned from the query but I need that column ordered.

How do I use the ORDER BY clause without returning the index column which does the sorting? The first example is NOT what I want. I want something that works like the second example which only returns the 'Name' column.

ALTER PROCEDURE [dbo].[MyProcedure]

AS

BEGIN

SELECT DISTINCT A.Name, A.index

FROM
...
...
ORDER BY A.[Index], A.Name ASC

END

ALTER PROCEDURE [dbo].[MyProcedure]

AS

BEGIN

SELECT DISTINCT A.Name
FROM
...
...
ORDER BY A.[Index]

END

Thanks

View Replies !

Order By Clause In DECLARE CURSOR Select Statement Won't Compile
The stored procedure, below, results in this error when I try to compile...

Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69
Incorrect syntax near the keyword 'ORDER'.

However the select statement itself runs perfectly well as a query, no errors.

The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs.

What gives with this?

Thanks in advance
R.

The code:

Code Snippet

-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF object_id('InsertImportedReportData ') IS NOT NULL
    DROP PROCEDURE InsertImportedReportData
GO
-- =============================================
-- Author:        -----
-- Create date:
-- Description:    inserts imported records, marking as duplicates if possible
-- =============================================
CREATE PROCEDURE InsertImportedReportData
    -- Add the parameters for the stored procedure here
    @importedReportID int,
    @authCode varchar(12)
AS
BEGIN
    DECLARE @errmsg VARCHAR(80);

--    SET NOCOUNT ON added to prevent extra result sets from
--    interfering with SELECT statements.
    SET NOCOUNT ON;

    --IF (@authCode <> 'TX-TEC')
    --BEGIN
     -- SET @errmsg = 'Unsupported reporting format:' + @authCode
    -- RAISERROR(@errmsg, 11, 1);
    --END

    DECLARE srcRecsCursor CURSOR LOCAL
    FOR    (SELECT
           ImportedRecordID
        ,ImportedReportID
        ,AuthorityCode
        ,[ID]
        ,[Field1] AS RecordType
        ,[Field2] AS FormType
        ,[Field3] AS ItemID
        ,[Field4] AS EntityCode
        ,[Field5] AS LastName
        ,[Field6] AS FirstMiddleNames
        ,[Field7] AS Title
        ,[Field8] AS Suffix
        ,[Field9] AS AddressLine1
        ,[Field10] AS AddressLine2
        ,[Field11] AS City
        ,[Field12] AS [State]
        ,[Field13] AS ZipFull
        ,[Field14] AS OutOfStatePAC
        ,[Field15] AS FecID
        ,[Field16] AS Date
        ,[Field17] AS Amount
        ,[Field18] AS [Description]
        ,[Field19] AS Employer
        ,[Field20] AS Occupation
        ,[Field21] AS AttorneyJob
        ,[Field22] AS SpouseEmployer
        ,[Field23] As ChildParentEmployer1
        ,[Field24] AS ChildParentEmployer2
        ,[Field25] AS InKindTravel
        ,[Field26] AS TravellerLastName
        ,[Field27] AS TravellerFirstMiddleNames
        ,[Field28] AS TravellerTitle
        ,[Field29] AS TravellerSuffix
        ,[Field30] AS TravelMode
        ,[Field31] As DptCity
        ,[Field32] AS DptDate
        ,[Field33] AS ArvCity
        ,[Field34] AS ArvDate
        ,[Field35] AS TravelPurpose
        ,[Field36] AS TravelRecordBackReference
    FROM ImportedNativeRecords
    WHERE ImportedReportID IS NOT NULL
    AND ReportType IN ('RCPT','PLDG')
    ORDER BY ImportedRecordID -- this should work but gives syntax error!
    );

END

View Replies !

Select Based On User Identity Name Included In Insert Into Second Table
I am having issues getting this to work. I have the user login to a page to
put in a request for vacation. When they login, I have a label that isn't
visible that is equal to their User.Identity.Name.
I select the user from the employee table where the username = the label User
Identity Name and pull in the emp_id which is the primary key that identifies
the user.
I need to insert the request into the request table with the emp_id from the
select statement, without showing the em_id on the screen. I tried using a
hidden field and assigning the emp_id as the value, but it isn't working.
Not sure if this is the best way to do this. Really new to ASP.NET 2.0 so I
really appreciate any help.
Thank you!

View Replies !

Select Statement For User Pyramid
I have a user table for an organization that can best be described as a pyaramid. We are using the terms parent and child to define the relationship between users. Each user is a child under a specific parent; accept for the top person who is not a child under anyone. Each user can be a parent over many children.

User A has a parent - User B
User B has a parent - User C
User C has a parent - User D
User D has not parent

I want to do is create a select statement that would return all the parents for a particular user. For instance, if I ran the select statement for User A, it would return:

User A
User B
User C
User D

If I ran it for User C, it would return:
User C
User D

Ideas anyone on how I can accomplish this.

View Replies !

First Time SELECT CASE Statement User
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub

View Replies !

Using User Input As Part Of A SELECT Statement
I know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks

View Replies !

How To Use A User Defined Stored Procedure/function In A Select Statement
How to use a User defined Stored Procedure/function In a Select statement.
eg. Select myproc(column1) from table1
How to register user defined functions( dlls) in SQL Server6.5/7 .
with Regards
K.Nageswara Rao

View Replies !

How Do You Place A Variable In Your Gridview Sql Statement?
I have the below select command in my gridview that uses a library name.table approach in the sql. I created a label on the page and want to pass the label in where i have the libarary1 text in the select statement. This will allow me to swap out the production library with my development library when im working on the site (thru the use of a site variable)
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:as400con %>"ProviderName="<%$ ConnectionStrings:as400con.ProviderName %>" SelectCommand="SELECT * from library1.table WHERE COMPANY = ? and ack = ? and HORZN_DATE <= ?">
<selectparameters><asp:controlparameter name="company" controlid="accts" propertyname="SelectedValue"/><asp:controlparameter name="ack" controlid="podropdown" propertyname="SelectedValue"/><asp:controlparameter name="dt" controlid="htoday" propertyname="Text"/></selectparameters>
How would I insert a label.text value into the select statement replacing the library1 ? I tried to use the asp:controlparameter adding the text and placing a ? mark in place of the library1 but it failed.
Thanks for any help you can lend on this,
Todd

View Replies !

Is It Possible To Re-reference A Column Alias From A Select Clause In Another Column Of The Same Select Clause?
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave

View Replies !

Gridview Select
I am using a GridView which is select enabled. I have another sqldatasource control on my page which will run a SQL query but needs a parameter. This parameter is from a column (EmployeeID) of the selected row in the gridview. In the Sqldatasource control I have specified the parameter source as a control which is Gridview .But I dont know how to point to the EmployeeID column of the selected row.Please help.

View Replies !

Select Parameters With Gridview
I have a form that has 4 fields to fill in. I have a button that can add these fields to a sql database. I also want to put a button next to the "add" button so you can fill out the same fields and search for those values. Here's what i have so far. I want to select based on the fields, but i'm having trouble with the syntax of the parameters. I also want to add something, so if nothing is filled out in one of those boxes, it retuns back all records for the default value.
string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnection);

String selectCmd = "SELECT * FROM users WHERE firstname = @firstame or lastname = @lastname or office = @office or team = @team";
SqlDataAdapter myCommand = new SqlDataAdapter(selectCmd, myConnection);

myCommand.SelectCommand.Parameters.Add(new SqlParameter("@firstname", SqlDbType.VarChar, 50));

myCommand.SelectCommand.Parameters.Add("@firstname", txtFirstName.Text);
myCommand.Parameters.AddWithValue("@lastname", txtLastName.Text);
myCommand.Parameters.AddWithValue("@team", dwnTeam.Text);
myCommand.Parameters.AddWithValue("@office", dwnOffice.Text);

DataSet ds = new DataSet();
myCommand.Fill(ds, "users");

MyDataGrid.DataSource = ds.Tables["users"].DefaultView;
MyDataGrid.DataBind();

View Replies !

[:#] Problems Viewing The Custom Sql Statement In The Gridview Control
Hi,
I really need some help trying to figure out why my gridview is not working when I create a custom sql statement. It "executes" the query, but gives me an error message when I "test the query". Here is the error message: "There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct. Syntax error: Expecting '.', identifier or quoted identifier."
Here is my sql statement:
SELECT TBLPROJECTS.NAME, TBLPROJECTTYPES.NAME AS PROJECTTYPE, TBLPROJECTS.DESCRIPTION, TBLUSERS_1.LOGIN AS OWNERNAME, TBLUSERS.LOGIN AS MANAGERNAME, TBLPROJECTS.START_DATE, TBLPROJECTS.END_DATE, TBLAOI.NAME AS AREAOFINTEREST, TBLPROJECTS.MANPOWER, TBLUNITS.NAME AS MANPOWERUNITFROM TBLPROJECTS INNER JOIN TBLAOI ON TBLPROJECTS.AOI_ID = TBLAOI.ID INNER JOIN TBLPROJECTTYPES ON TBLPROJECTS.PROJECTTYPE_ID = TBLPROJECTTYPES.ID INNER JOIN TBLUNITS ON TBLPROJECTS.MANPOWERUNITS_ID = TBLUNITS.ID INNER JOIN TBLUSERS ON TBLPROJECTS.MANAGER_ID = TBLUSERS.ID INNER JOIN TBLUSERS TBLUSERS_1 ON TBLPROJECTS.OWNER_ID = TBLUSERS_1.ID
I have tested it on a new project and still it does not work, I cannot find any problem, please help!!!!!!!!!!!!!!!!!!!!!!!!

View Replies !

Login Failed For User 'NT AUTHORITYANONYMOUS LOGON' (but User.identity.name Is Correct)
I need help. The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"

IIS has 4 websites hosted on it. The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?

View Replies !

Changing The SQLDatasource SELECT For A Gridview
I cant seen to change the Select command for a SQL Datasourcetry #1            SqlDataSourceProfilesThatMatch.SelectCommand = strSQLForSearch            SqlDataSourceProfilesThatMatch.SelectParameters("ProfileID").DefaultValue = pProfileID            SqlDataSourceProfilesThatMatch.SelectParameters("LoggedInUsersZipcode").DefaultValue = pUsersZipCode            SqlDataSourceProfilesThatMatch.SelectParameters("ZipDistance").DefaultValue = pDistance
            NewProfilesThatMatchGridView.DataBind()
try #2            SqlDataSourceProfilesToBeMatched.SelectParameters.Clear()            SqlDataSourceProfilesThatMatch.SelectCommand = strSQLForSearch            SqlDataSourceProfilesThatMatch.SelectParameters.Add("ProfileID", pProfileID)            SqlDataSourceProfilesThatMatch.SelectParameters.Add("LoggedInUsersZipcode", pUsersZipCode)            SqlDataSourceProfilesThatMatch.SelectParameters.Add("ZipDistance", pDistance)
            NewProfilesThatMatchGridView.DataBind()
No errors but no rows show in the gridview. If I debug and get the value strSQLForSearch and paste it into a new SQL query window I get results.
Any ideas????
Thanks

View Replies !

Select Just A Couple Of Rows Into Gridview
I am using a sqlDataSource to read my query and to put the rows into a gridview. Now I want to read just a couple of rows from my query based on a maximum number, also defined in the table. I have absolutely no idea how to do that..for example: I want to view only the 10 most recent subsciptions into my gridview. The subscriptions are stored into tabel Subscriptions which has values id, userid,date. Table Event has a parameter "maximum subscriptions" (which is 10 in my example) I hope it is clear enough?Thank you in advance!BlueiVeinz

View Replies !

Select Statement Within Select Statement Makes My Query Slow....
Hello... im having a problem with my query optimization....

I have a query that looks like this:

SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)

it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View Replies !

Select Command Lost Thus Gridview Shows Nothing
Hi there,I am not sure how many of you have experienced this problem before but here is how to replicate it: Add a GridView, SqlDataSource and Button to a new projectSet the DataSourceID to the SqlDataSource objectSet AllowPaging to True on the GridViewWithin the Button1_Click sub, change the SqlDataSource.SelectCommand to a new Query e.g SELECT * FROM table WHERE ID > 1Run the project Click on another page, i.e. "3" on the GridView SqlDataSource.SelectCommand is now blank(!), thus Gridview displays nothing. Has anyone else found a solution to this annoying issue? Any help is appreciated.Regards

View Replies !

Sqldatasource, Does It Select If Not Bound To A Gridview, Formview On The Page?
Using 3.5
If I have a sqldatasource on the page, is it run if it is not bound to a data object like a gridview?
Seems like if i want to access the data (like set a label text) from the sqldatasource I have to use code to first create a dataview then pick throught it. This seems like I'm running it twice. I'm new at .net so I dont know how to tell.
I don't want to write data select code programatically when I can just through an SDS on the page, but wondered it it ran just because it's on the page.

View Replies !

SELECT Then DELETE Versus Extra Clause In SELECT
Far below (in section "original 3 steps"), you see the following:1. a temp table is created2. some data is inserted into this table3. some of the inserted data is removed based on a join with the sametable that the original select was made fromIn my opinion, there is no way that the join could produce more rowsthan were originally retrieved from viewD. Hence, we could get rid ofthe DELETE step by simply changing the query to be:INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )AND INMESS NOT LIKE '2__' ---- the added line===== original 3 steps (mentioned above) =====CREATE TABLE #details (rec_id UNIQUEIDENTIFIER PRIMARY KEY NOT NULL,orig VARCHAR(35) NULL,bene VARCHAR(35) NULL,orig_corr TINYINT NULL,bene_corr TINYINT NULL)INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )DELETE dFROM #details dJOIN viewD v ON ( d.rec_id = v.rec_id )WHERE INMESS LIKE '2__'

View Replies !

Expression Defined In SELECT Clause Overwrites Column Defined In FROM Clause
2 examples:

1) Rows ordered using textual id rather than numeric id

Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
  select 1 id
  union select 2 id
  union select 11 id
) v
order by
v.id

Result set is ordered as: 1, 11, 2
I expect: 1,2,11

if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

2) SQL server reject query below with next message

Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.

Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
  select 1 id
  union select 2 id
  union select 11 id
) v
cross join (
  select 1 id
  union select 2 id
  union select 11 id
) u
order by
v.id
    ,u.id

Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

It reproducible on

Microsoft SQL Server 2000 - 8.00.2039 (Intel X86)   May 3 2005 23:18:38   Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

and

Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)   Feb 9 2007 22:47:07   Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

In both cases database collation is SQL_Latin1_General_CP1251_CS_AS

If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.

Could someone clarify - is it bug or expected behaviour?

View Replies !

Want Error Message To Appear When No Database Results Were Returned In GridView, Also Other GridView Issues.
Hi, I am seeking a hopefully easy solution to spit back an error message when a user receives no results from a SQL server db with no results. My code looks like this What is in bold is the relevant subroutine for this problem I'm having. Partial Class collegedb_Default Inherits System.Web.UI.Page Protected Sub submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] WHERE [name] like '%" & textbox1.Text & "%'" SqlDataSource1.DataBind() If (SqlDataSource1 = System.DBNull) Then no_match.Text = "Your search returned no results, try looking manually." End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End Sub Protected Sub reset_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles reset.Click SqlDataSource1.SelectCommand = "SELECT * FROM [college_db] ORDER BY [name]" SqlDataSource1.DataBind() End SubEnd Class I'm probably doing this completely wrong, I'm a .net newb. Any help would be appreciated. Basically I have GridView spitting out info from a db upon Page Load, but i also have a search bar above that. The search function works, but when it returns nothing, I want an error message to be displayed. I have a label setup called "no_match" but I'm getting compiler errors. Also, next to the submit button, I also have another button (Protected sub reset) that I was hoping to be able to return all results back on the page, similar to if a user is just loading the page fresh. I'd think that my logic would be OK, by just repeating the source code from page_load, but that doens't work.The button just does nothing. One final question, unrelated. After I set this default.aspx page up, sorting by number on the bottom of gridview, ie. 1,2,3,4, etc, worked fine. But now that paging feature, as long with the sorting headers, don't work! I do notice on the status bar in the browser, that I receive an error that says, "error on page...and it referers to javascript:_doPostBack('GridView1, etc etc)...I have no clue why this happened. Any help would be appreciated, thanks!

View Replies !

IF ELSE Statement In WHERE Clause
actually i need to do a sql report... there are 3 parameters (date from. date to, issue_user_id) that are required in order to retrieve the data...now i am facing one problem, if i just enter the date_from and date_to, and leave the issue_user_id blank, i wish to retrieve all the data, but i can't do it.

i have try to use:

if @IssueUserID = ' ' Select....(blah blah ) else select (blah blah)...it is long and work in Query analyzer but no working in .NET Reporting services.... :confused: is it possible to enter IF ..ELSE statement in WHERE clause?hope that u all can help.....

================================================== ==
SELECT REPLACE(REPLACE(REPLACE(REPLACE(tbl_Receipt.Paymen tRefID, '1', 'Deposit for Admission'), '2', 'Consultation Services'), '3', 'Medical Fees'), '4','Others') AS PaymentRefID, tbl_Receipt.ReferenceNo, tbl_Receipt.ReceiptDate, CONVERT(varchar(10), tbl_Receipt.ReceiptDate, 103) AS ReceiptDt, tbl_Receipt.TotalAmountPaid, tbl_Receipt.Payee, tbl_ReceiptDT.PaymentTypeID, tbl_PaymentType.PaymentType, tbl_ReceiptDT.Amount,
tbl_User.Name, tbl_Receipt.IssueUserID, tbl_User.Designation
FROM tbl_Receipt WITH (nolock) INNER JOIN
tbl_ReceiptDT WITH (nolock) ON tbl_Receipt.ReceiptID = tbl_ReceiptDT.ReceiptID INNER JOIN
tbl_PaymentType WITH (nolock) ON tbl_ReceiptDT.PaymentTypeID = tbl_PaymentType.PaymentTypeID INNER JOIN
tbl_User ON tbl_Receipt.IssueUserID = tbl_User.UserID

WHERE (tbl_Receipt.ReceiptDate BETWEEN CONVERT(datetime, @DateFrom, 103) AND CONVERT(datetime, @DateTo, 103)) AND
(tbl_Receipt.IssueUserID = @IssueUserID)
ORDER BY tbl_User.UserID, tbl_ReceiptDT.PaymentTypeID

View Replies !

Right Use Of Like In An Or Clause Of Where Statement
I have the below where clause on a select

where substring(pa.other_id_number,5,1) = @monthid
and pa2.df_patstatus like 'act%'
and ((pa2.df_institutionname not like ('ACT%')
or pa2.df_institutionname not like ('county%')))

It returns records that have either one of the not like statements. If I comment out the line and use below it will work for one of the statements

where substring(pa.other_id_number,5,1) = @monthid
and pa2.df_patstatus like 'act%'
and pa2.df_institutionname not like ('ACT%')

How can I get the two to work together. I thought the parenthesis would work but no luck.

View Replies !

LIKE Clause In IF Statement
Can the like clause be used in IF statement or only applicable to SELECT statement ?

e.g.

IF (@lADDRESS LIKE '%P.O. BOX')

BEGIN

PRINT 'IGNORE ADDRESS'

END

Thank you

Yog

View Replies !

Using Case Statement With WHERE Clause...
Hi,
I need help to use CASE Statement within my WHERE Clause. I want to change the WHERE Clause based on my condition as following:
SELECT ...
FROM ...
WHERE (condition)
AND       (condition)
AND       (condition)
AND       (
                    CASE Table.Category
                          WHEN 'Drinks' THEN
                               Table1.Field1 = 1 -- Problem line
                          ELSE
                               Table1.Field1 = 1 AND Table1.Field2 = 1 -- Problem line
                   END
             )
In the above case, my WHERE Clause is dependent on one of the fields in a table. If it has a certain value then only Table1.Field1 is used otherwise Table1.Field1 & Field2 come into action.
I am getting error on the mentioned line (Problem Line). Since CASE is an expression and does not execute a statement, can anyone help me to get my WHERE Clause working...
Thanks in advance...

View Replies !

If/Case Statement In Having/Where Clause - Please Help Me.
Hi!I want to make search engine and I have problem with query for this search. User can write username to search or text to search or both. So at first I made query for each event individually: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int
AS
DECLARE @date DATETIME
SET @date = DATEADD(day,@days,GETDATE())
IF @username IS NOT NULL AND @search_text IS NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (dbo.aspnet_Users.UserName = @username) AND (forum_topics_1.post_current_date >= @date)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%')
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NOT NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%') AND
(dbo.aspnet_Users.UserName = @username)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
RETURN This 3 queries are different only by Having clause. So I want to put If/Case in Having clause, but I have problem. Can anyone help me?Also I want to make paging from SQL level, so if anyone will be so helpful and make working this query with this: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int,
@page int,
@page_size int
AS
WITH Results As
(
//QUERY)

)
SELECT * FROM Results
WHERE RowNumber BETWEEN (@page_size * @page + 1) AND (@page_size * (@page + 1))
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
RETURN I will be grateful :-)

View Replies !

Case Statement In Where Clause
I need a SQL statement that selects a specific year (@yr type int) in the "createddate" column...if this @yr is equal to 0 then I want to select ALL columns regardless of the year...This is what I have so far, but it doesnt work...SELECT * FROM tblUsersWHERE year(CreatedDate)=CASEWHEN @yr<>'0' THEN @yrELSE NOT NULLEND

View Replies !

Need Help With Query Statement 'IN' Clause.
I have a column in the database that stored moduleId that are seperated by '|' (pipes). For Example: '527|343|454'

I need to add a where clause to a query that pulls the data based on a
ModuleId. For Example: select * from table where 527 in [column above]

Does anyone know how I can do this in a query? Normally I could
use an IN statement, ex: select * from table where 527 in (527,343,454)

How can I get the column in that format?

Thanks for the help in advance,

KM

View Replies !

Case Statement In Where Clause
If you could help me with my syntax i would really appreciateit. I'm trying to change the where clause on the fly, but it'sgiving me a syntax error.Hopefully from what I have below you can tell what i'm afterthe first part should evaluate a boolean expression, then if true,search using one field, otherwisesearch using a different fieldWHERECase WHEN @myCompany = 933THEN tblClient.companycode = 933 --problem lineELSEtblCase.clientcode = @myClient --problem lineENDAnd tblCase.status = 'Active'thank you!!

View Replies !

CASE Statement In Where Clause?
Can anyone tell me if it's possible to use a Case statement in a Whereclause, and if so, the proper syntax?J.R.Largo SQL ToolsThe Finest Collection of SQL Tools Availablehttp://www.largosqltools.com

View Replies !

Case Statement In Where Clause
Hello

I want to put a case statement into a where clause but it's not working. Can anybody help, or tell me a better way of doing this

Thanks very much

declare @param varchar (100)
select @param = 'mytext

select
colA
,colB
,colC
from
mytable
where
(case
when @param is null then colA = 'group'
else colA = 'single'
end)

View Replies !

HAVING Clause Is A Case Statement???
i have wrote a query which compares two tables, returning anywhere the qty is not the same in each table:

(simple ex)

Select order_no
from table1
inner join table2
on table1.order_no = table2.order_no
group by order_no
having table1.Qty<> table2.Qty

BUT... I need to add a table3, where there maybe (or may not be enters - thus a left join). If there is an entry in table3 then use qty in table3 and not table1... so having becomes:

CASE WHEN table1.Qty<> table3.Qty
THEN table3.Qty<> table2.Qty
ELSE table1.Qty<> table2.Qty END

but how do i actually write this?

View Replies !

Case Statement In Where Clause
can i use case statement in where clause.
The scenario is as follow

declare @param int
select
*
from
table1
where
column1 = 'asdf'
column2= @param

In the above sql, if @param is '' then i don't want to include it in the where clause.I can use "like" statement for that, but i want exact value not partial value.

can i use case in where clause so that if @param is '' then i will not include in the where clause

View Replies !

Case Statement In Where Clause?
Can I do the following? Keep getting an error stopping at the first < of the where clause.

declare @mon as int, @yr as int, @myDate as varChar(20)
set @yr=2006
set @mon=1
set @mydate='01/31/2006 23:59:59'

select 0 as DTAP, 0 as DT, 0 as TD, 0 as HIB, 0 as IPV, 0 as MMR, 0 as HEPB, 0 as _VAR, count(v.procedureKey) as FLU, 0 as PPV23, 0 as PCV7, v.chartID, max(rs1.dateService) as dateService from dbo.tbl1 v,
(select distinct dateService, chartID, procedureKey from fhc.dbo.tbl1 where (datePart(year,dateService)=@yr and datePart(month,dateService)=@mon) and (procedureKey='90657' or procedureKey='90658')) as rs1
where (v.chartID=rs1.chartID) and (v.procedureKey=rs1.procedureKey) and
(case when @mon=1 then dateDiff(month,dateService,@myDate)< 216
when @mon=2 then dateDiff(month,dateService,@myDate)<244
when @mon=3 then dateDiff(month,dateService,@myDate)<275
when @mon=4 then dateDiff(month,dateService,@myDate)<305
when @mon=5 then dateDiff(month,dateService,@myDate)<336
when @mon=6 then dateDiff(month,dateService,@myDate)<366
when @mon=7 then dateDiff(month,dateService,@myDate)<32
when @mon=8 then dateDiff(month,dateService,@myDate)<63
when @mon=9 then dateDiff(month,dateService,@myDate)<93
when @mon=10 then dateDiff(month,dateService,@myDate)<124
when @mon=11 then dateDiff(month,dateService,@myDate)<154
when @mon=12 then dateDiff(month,dateService,@myDate)<185
end) group by v.chartID, rs1.procedureKey

View Replies !

Using CASE Statement In A WHERE Clause
Is it possible to use CASE within a WHERE?

I have a query which is something like this, but it returns an error:

SELECT * FROM tablex

WHERE

CASE WHEN 'sexec' IS NOT NULL THEN

dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' and dm_sexec LIKE 'sexec' ELSE

dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' END

GROUP BY dm_marque

In this case sexec is a form parameter, if something is passed then I need to include it in the where statement, if it isn't I need to include something else. I am using CASE because there are three of these parameters and I want it to stop evaluating as soon as it matches as more than one may match but I only want to apply one.

Many thanks

Karen

View Replies !

WHERE Clause Of An INSERT INTO Statement

Hi,

I have the following bit of SQL:

Code Block
INSERT INTO [INTRANETSQLEXPRESS].Trapped.dbo.TBL_Debtsolv (Debtsolv_ID, Payment_Amount, Payment_Status, Client_Status)
SELECT Client.ID AS ClientID,
InitialInstallment.OffsetAmountExpected AS FirstExpectedPayment
,
CASE WHEN Payment.TotalPaid <= 0 OR LatestPaymentDate IS NULL
THEN 'No Money Paid'
WHEN Payment.TotalPaid < InitialInstallment.OffsetAmountExpected
AND Payment.TotalPaid >0
AND InitialInstallment.DateExpected + ISNULL(Schedule.DayOffset, 0) >GETDATE()
THEN 'Still Awaiting - Part Paid'
WHEN Payment.TotalPaid >= InitialInstallment.OffsetAmountExpected
THEN '1st Payment Made'
WHEN Payment.TotalPaid < InitialInstallment.OffsetAmountExpected
AND InitialInstallment.DateExpected + ISNULL(Schedule.DayOffset, 0) <GETDATE()
THEN 'Late - First Payment Not Made'
ELSE 'Status Unclear'
END
AS Status
, CASE WHEN
Client.Status IN(0,1,2,3,4,5,6,7)
THEN 'In Preparation'
WHEN Client.Status IN(8,9)
THEN 'Active'
ELSE 'Inactive'
END AS ClientStatus
FROM SALEEN.Debtsolv.dbo.Client_Contact as Client
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Payment_Schedule AS Schedule
ON Client.ID = Schedule.ClientID
INNER JOIN SALEEN.Debtsolv.dbo.Client_LeadData CLD
ON Client.ID = CLD.Client_ID
INNER JOIN SALEEN.Debtsolv.dbo.Type_Client_Status TCS
ON Client.Status = TCS.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Type_Lead_Source TLS
ON CLD.SourceID = TLS.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Type_Lead_Source_Group AS LeadGroup
ON TLS.[Group] = LeadGroup.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Users [User]
ON CLD.Counsellor = [User].ID
LEFT OUTER JOIN (SELECT ClientID
, SUM(CAST((Amount + ISNULL(AmountOffset, 0))AS Money) / 100) AS OffsetAmountExpected
, MAX(DateExpected) AS DateExpected
FROM SALEEN.Debtsolv.dbo.Payment_Schedule AS PS
WHERE (SequenceID <=(SELECT
CASE WHEN NumInitialInstalments = 0 THEN 1
ELSE IsNull(NumInitialInstalments, 1)
END
AS NumInitialInstalments
FROM SALEEN.Debtsolv.dbo.Client_LeadData AS LD
WHERE (Client_ID = PS.ClientID)))
GROUP BY ClientID
)
AS InitialInstallment
ON Client.ID = InitialInstallment.ClientID
LEFT OUTER JOIN (SELECT Receipt.ClientID
, SUM(CAST(Receipt.Amount AS Money)) / 100 AS TotalPaid
FROM SALEEN.Debtsolv.dbo.Payment_Receipt Receipt
INNER JOIN SALEEN.Debtsolv.dbo.Type_Payment_Status Type
ON Receipt.Status = Type.ID
WHERE (Receipt.Status = 5)
GROUP BY ClientID)
AS Payment
ON Client.ID = Payment.ClientID
LEFT OUTER JOIN (SELECT ClientID
, MAX(ID) AS MaxPSID
, MAX(LastPayment) AS LatestPaymentDate
FROM SALEEN.Debtsolv.dbo.Payment_Schedule Schedule
WHERE (NOT (LastPayment IS NULL)
AND LastPayment > CONVERT(DATETIME, '1980-01-01 00:00:00', 102))
GROUP BY ClientID)
AS LatestPaymentDate
ON Client.ID = LatestPaymentDate.ClientID
INNER JOIN (SELECT ClientID
, MAX(SequenceID) AS LFPDSequenceID
FROM SALEEN.Debtsolv.dbo.Payment_Schedule PS
WHERE (PaymentType = 1)
GROUP BY ClientID)
AS LastPayment
ON Client.ID = LastPayment.ClientID
AND Schedule.ClientID = LastPayment.ClientID
AND Schedule.SequenceID = LastPayment.LFPDSequenceID
WHERE Client.ID = TBL_Debtsolv.Debtsolv_ID

Executing this statement gives the following error:

Code Block

Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "TBL_Debtsolv.Debtsolv_ID" could not be bound.

I think thsi is soemthing to do with referencing another table in the INSERT into command as if I put:

Code Block
WHERE Client.ID = '12065'

The statement executes with no problem. I think I have read in some other threads that you cannot reference another table in the WHERE part of an INSERT INTO clause but cannot find out how I can make this work.

Most of the statement comes from a pre-made report from one of our systems and I have slighlty changed it to insert the data into another database that we have.

Any suggestions would be greatly appreciated

Thanks

View Replies !