MS SQL Server :: How To Write A SELECT Statement And Store The Result In A Session Variable

Store Varbinary Data Result Into SSIS Variable Through Execute SQL Task
I cannot find the data type for parameter mapping from Execute SQL Task Editor to make this works.

1. Execute SQL Task 1 - select max(columnA) from tableA. ColumnA is varbinary(8); set result to variable which data type is Object.

2. Execute SQL Task 2 - update tableB set columnB = ?
What data type should I use to map the parameter? I tried different data types, none working except GUI but it returned wrong result.

Does SSIS variable support varbinary data type? I know there's a bug issue with bigint data type and there's a work-around. Is it same situation with varbinary?

Thanks,

-Ash

View Replies !

How To Select In From A Store Procedure Result?
HI, I'm a simple store procedure that returns a result such as this one:

AM
AM-1
AM-2
AM-n

and in other store procedure I need to filter result from this list.
I think that some query like this is impossibile

select fields from table where id in (execute sp)

how can I make this?

Thanks a lot.

View Replies !

How To Write Select Statement Inside CASE Statement ?
Hello friends,
      I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
    CASE E.EmployeeType
        WHEN 1 THEN
            select * from Tbl1
        WHEN 2 THEN
            select * from Tbl2
        WHEN 3 THEN
            select * from Tbl3
    END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View Replies !

Assign SELECT Result To Variable
Hi this is probably a very stupid question, but I still need to know.

How do I set the result of a 'SELECT' statement to a variable? I know I can use CURSOR, but I am certain the SELECT statement will return either 1 record or NULL. Can I use something else apart from CURSOR?

View Replies !

Want To Write A Query Which Select The Columns Passed As Variable In Sql Sp
i want to select the values of column passed from the user like

connectionsizein or connectionsizemm

how can i do

i am using sql server 2005

View Replies !

Trying To Write A Select Statement.
I want to write a select statement that will show only distinct Student IDs where every record in the table with that student id has a grade above 80?
Lets say for example the table looks like this:

Student_ID

Grade

11276

93

56879

81

11276

76

44327

92

11276

84

56879

97

56879

82 The select statement should only show students, 56879 & 44327 because student 11276 made a 76 in one class.Anyone know how to word this select statement?Thanks for any help!

View Replies !

How To Write The Select Statement?
I create a table that is named T1(C1,C2) and insert some data,as following:

C1    C2
1      1
4      NULL
NULL   5
7      NULL
NULL   9
12     12
14     NULL
NULL   16
I want to write a select statement to obtain the following result:

C1    C2
1      1
4      5
7      9
12     12
14     16
how to write the select statement?

ã€€

View Replies !

Is It Possible To Write If/Then Else Within SQL Select Statement For Vb.net?
I'm running a select statement from within my VB.net code. However, if the software package name that I chose from a drop down list in my form is not available in the search (in the TableColumn called Software.Package_Name), I would like to be able to write the message "Record Not Found" to the Package_Name "ListBox" column.

Here's the select statement:
"SELECT n.Workstation_Name , s.install_status , s.install_date , s.name , s.version , s.build , s.Package_Name , n.city , n.state FROM software s , network n where ( s.mac=n.mac AND n.Workstation_Name='B001617CA709E' ) AND ( s.name='Adobe Reader' AND s.Install_status='1') ORDER BY n.Workstation_Name ASC"

My ListBox control is named lstQueryResults and uses a Structure that is one to one with each row of the lstQueryResults control.
i.e.

Public Class LIST_CTRL_DATA

Public WksName As String

Public InstallStatus As String

Public InstallDate As String

Public PackageName As String

Public AppName As String

Public Version As String

Public Build As String

Public City As String

Public State As String

Public Percent As UInteger

Finally, here's the While..End routine that plugs the data into the ListBox called lstQueryResults.

While sqlReader.Read()

currec += 1

Dim msg As THREAD_MESSAGE

msg.msgid = 101

Dim message As New LIST_CTRL_DATA

message.WksName = sqlReader("Workstation_Name").ToString

message.InstallStatus = sqlReader("Install_Status").ToString

message.InstallDate = sqlReader("Install_Date").ToString

message.AppName = sqlReader("Name").ToString

message.Version = sqlReader("Version").ToString

message.Build = sqlReader("Build").ToString

message.PackageName = sqlReader("Package_Name").ToString

message.City = sqlReader("City").ToString

message.State = sqlReader("State").ToString

message.Percent = (currec * 100) / maxrecs

msg.msgdata = message

m_ParentWindow.Invoke(m_NotifyMainWindow, msg)

End While

Any ideas on whether or not you can write an If..Then Else statement within the SQL Select Statement and if so how?
I'm still somewhat new to SQL. Any assistance would be great.

Regards,
NBK

View Replies !

How To Use Variable To Receive The Result Of A Select Statment. ?
Good morning;

My Problem is :im my transaction i use insert code like the following :

" Insert into TAB1 (F1,F2,F3)
select a.F1,b.F2,b.F3 from TAB2 a,TAB3 b
where a.KY1= b.KY1 and b.ORDN in
(Select ORDN from OTAB where USER_ID = 'MIKE')"

In order to optimise my code ,
instead of using a subquery in my select
(I have different insert in my transaction with the same subquery).
I would like to DECLARE a varibale which will contain the select of the Subquery.
and then use it im my different insert. some thing like this.

" BEGIN TRANSACTION
DECLARE @OrdSelect int
Set @OrdSelect = (Select ORDN from OTAB where USER_ID = 'MIKE')
Insert into TAB1 (F1,F2,F3)
select a.F1,b.F2,b.F3 from TAB2 a,TAB3 b
where a.KY1= b.KY1 and b.ORDN in @OrdSelect
COMMIT Tran "

I know that the @OrdSelect will receive the last value of the select not an array of values. which will make my transaction incorrect.
I dont want to use Cursor to resolve this issue Too.

Thinks.

View Replies !

Different Result Of Each Select Statement
Hi, I execute a select statement

SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'

every times I execute it I get different result.

1st result : 17036986
2nd result : 17037903
3rd result : 17038309

Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.

View Replies !

How To Put Condition In Select Statement To Write A Cursor
col1          col2 col3   col4
36930.60   145    N   . 00
17618.43   190   N    . 00
6259.20    115 N    .00
8175.45     19    N     .00
18022.54   212   N    .00
111.07      212   B     .00
13393.05   67   N     .00
In above 4 col
if col3 value is B then cursor has to fectch appropriate value from col4.
if col3 value is N then cursor has to fectch appropriate value from col1.
here col2 values are unique.

Can any one reply for this..............

View Replies !

Get Numeric Result From SELECT Statement
Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,MÃ¡rio Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);

View Replies !

Store &&"SQL Task&&" Result As Variable

Help - I am having a moment!

I am building a simple package that looks at the results of a sql query, prior to running the next step.

Basically Outline and settings

SQL task

Result Set: Full result set

SQL Source: Direct Input

SQL Statement: Select Count (*) FROM X

Parameter Mapping

Variable Name: User::C

Direction: Return Value

Data Type: Numeric

Parameter Name: NewParameterName

Result Set = NewResultName: User::C

Precedence Constraint

Evaluation Operation: Expression and Constraint

Value: Success

Expression: @C > 0 ( I originally tried User::C and received an error message)

Execute SQL Server Agent Job

If step one results greater than 1, then execute the SQL agent job (SRS Report)
Using this setup I receive an error message stating "

TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package: The expression "@C > 0" must evaluate to True or False. Change the expression to evaluate to a Boolean value.
Error at Package: There was an error in the precedence constraint between "Execute SQL Task" and "Execute SQL Server Agent Job Task".
(Microsoft.DataTransformationServices.VsIntegration)

Any thought or suggestions would be greatly appreciated.

r/ Anthony

View Replies !

Using Select Statement Result In If Statement Please Help
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated

View Replies !

Store Ouput From Select Statement
I am running a select statment which retruns one row how I can assign that results to a memory variable ?

thanks

View Replies !

Aggregate Function For Select Statement Result?
Ok, for a bunch of cleanup that i am doing with one of my Portal Modules, i need to do some pretty wikid conversions from multi-view/stored procedure calls and put them in less spid calls.

currently, we have a web graph that is hitting the sql server some 60+ times with data queries, and lets just say, thats not good. so far i have every bit of data that i need in a pretty complex sql call, now there is only one thing left to do.

Problem:
i need to call an aggregate count on the results of another aggregate function (sum) with a group by.

*ex: select count(select sum(Sales) from ActSales Group by SalesDate) from ActSales

This is seriously hurting me, because from everything i have tried, i keep getting an error at the second select in that statement. is there anotherway without using views or stored procedures to do this? i want to imbed this into my mega sql statement so i am only hitting the server up with one spid.

thanks,
Tom Anderson
Software Engineer
Custom Business Solutions

View Replies !

Print A Select Statement Within A Store Procedure
I want to create store procedure which will print out something like this:

Insert into [dbname].dbo.[gameBooks] value (@gameBookID, gameBookTitle, ganeVolumn)
But first one print out good, as I expected. I either got nothing or the error message on second piece.

Msg 245, Level 16, State 1, Line xxx
Conversion failed when converting the varchar value 'Insert into [dbname].dbo.[cookBooks] value (' to data type int.
Any Help will be greatly appreciated.

on SQL 2005 SP1.
Here is my example code (not the real one):
Create Procedure [dbo].[makeNewString]
@myBookID
As
Declare bookID int
Declare newRowID int
Declare insertBookInfoString nvarchar(150)
select 'Declare @newBookID int'
Set insertBookInforString =
(Select 'Insert into [dbname].dbo.[gameBooks] value (' + @gameBookID + ',' + gameBookTitle +',' + ganeVolumn +')'
from [dbname].dbo.[gameBooks])
where @gameBookID=@myBookID
Print insertBookInforString
select 'SET @newRowID = Scope_Identity()'
print @newRowID
select 'Declare @newBookID int'
Set insertBookInforString =
(Select 'Insert into [dbname].dbo.[cookBooks] value (' + @cookBookID +',' + cookBookTitle +','+cookVolumn+')'
from [dbname].dbo.[cookBooks]
where @cookBookID=@myBookID)
Print insertBookInforString
first insertBookInfoString prints out fine.
But I kept this error on second part:

------------------------------
DECLARE Declare @newBookID int
(1 row(s) affected)
Insert into [dbname].dbo.[gameBooks] value (@gameBookID, gameBookTitle, ganeVolumn) (this is what I want)
-----------------------------------------
SET @newBookID = Scope_Identity()
(1 row(s) affected)

Msg 245, Level 16, State 1, Line xxx
Conversion failed when converting the varchar value 'Insert into [dbname].dbo.[cookBooks] value (' to data type int.

View Replies !

How Do You Use Data From A Select Statement As Inputs For A Store Procedure?
How do you use data from a select statement as inputs for a store procedure?

e.g.

Code Block

Select FirstName, LastName from Student where Grade = 'A'

And I want to use all the FirstName and LastName as inputs for this store procedure

Code Block

Exec StudentOfTheMonth @FirstName = FirstName, @LastName = LastName
Thanks

View Replies !

Cannot Set A Variable From A Select Statement That Contains A Variable??? Help Please
I am trying to set a vaiable from a select statement

DECLARE @VALUE_KEEP NVARCHAR(120),

@COLUMN_NAME NVARCHAR(120)

SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')

SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)

PRINT @VALUE_KEEP

PRINT @COLUMN_NAME

RESULTS

-------------------------------------------------------------------------------------------

FirstName <-----------@VALUE_KEEP

FirstName <-----------@COLUMN_NAME

SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName

SELECT FirstName from Contacts returns: Brent

How do I make this select statement work using the @COLUMN_NAME variable?

Any help greatly appreciated!

View Replies !

Can A Column Be Derived Using Substring But The Parameters Are A Result Of A Select Statement?
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.

Table 1

Org

aaa:aaa:aa

aaa:aaa:ab

aaa:aab:aa

Table 2

delim

Seg1Start

Seg1Len

Seg2Start

Seg2Len

Seg3Start

Seg3Len

:

1

3

5

3

9

2

My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.

Any ideas? Can this be done in SSIS?

I'd really appreciate any insight that anyone might have.

Regards,

Bill

View Replies !

Variable In A Select Statement
Is there anyway to use a variable to define a column in a select statement. I can put the variable in but I'm sure it will be read as a literal instead of the column.

select @column_name from table

View Replies !

Variable Db Name In SP Select Statement
I need a general stored procedure so the database name will be an input parameter.

I want to do a Select statemant such as:

Select name from @DBName . . sysobjects where xtype - 'u' rather than a hard coded --
Select name from pubs..sysobjects where xtype = 'u'

but I can't find the right way of using @DBName

View Replies !

Variable Db Name In SP Select Statement
I need a general stored procedure so the database name will be an input parameter, for example-- @DBName varchar(30)

I want to do a Select statemant such as:

Select name from @DBName . . sysobjects where xtype - 'u' rather than a hard coded --
Select name from pubs..sysobjects where xtype = 'u'

but I can't find the right way of using @DBName

Thanks,
Judith

View Replies !

SQL Select Statement With A 'string' Variable?
I'm trying to add a 'change password' control to my site and seem to be having some issues. I have code that works if I statically define what user is displayed on the form, but I cant get it to detect the 'authenticated' user and show them the reset for for that ID.If I take the "+ myid" out of the select statement and just define the username statically the form works properly. Error:System.Data.SqlClient.SqlException: The column prefix
'System.Security.Principal' does not match with a table name or alias name used
in the query. Here's a piece of the code that is supposed to detect the current logged in user. However, it gives the error. (some of the code may be redundant but its not causing issues that I can tell) public void InitPage() { IPrincipal p = HttpContext.Current.User; String myid = HttpContext.Current.User.ToString(); SqlServer sqlServer = new SqlServer(Util.SqlConnectionString()); DataTable dt; SqlConnection cnn = new SqlConnection(ConfigurationManager.ConnectionStrings["myconnection"].ConnectionString); SqlDataAdapter cmd1 = new SqlDataAdapter("select * from USER WHERE USER_NAME = "+ myid, cnn); DataTable UIDtable = new DataTable(); cmd1.Fill(UIDtable); User_Id.Value = UIDtable.Rows[0]["ID"].ToString(); dt = sqlServer.USER_SELECT(Util.SiteURL(Request.QueryString["Pg"].ToString()), User_Id.Value);

View Replies !

Using A Variable For Tablename In Select Statement?
I have a stored procedure that accepts the table name as a parameter. Is there anyway I can use this variable in my select statement after the 'from' clause. ie "select count(*) from @Table_Name"?
When I try that is says "Must declare the table variable @Table_Name". Thanks!

View Replies !

Variable For The Table Name In A SELECT Statement.
Hi,I'm trying to dynamically assign the table name for a SELECT statement but can't get it to work. Given below is my code: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

CREATE PROCEDURE GetLastProjectNumber (@DeptCode varchar(20))
AS
BEGIN TRANSACTION
SET NOCOUNT ON

DECLARE @ProjectNumber int
SET @ProjectNumber = 'ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
SELECT MAX(@ProjectNumber)
FROM 'tbl_ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','');
END TRANSACTION Basically, I have a bunch of tables which were created dynamically using the code from this post and now I need to access the last row in a table that matches the supplied DeptCode. This is the error I get:Msg 102, Level 15, State 1, Procedure GetLastProjectNumber, Line 29Incorrect syntax near 'tbl_ProjectNumber'. Any help would be appreciated.Thanks.

View Replies !

Variable Not Holding Value For Select Statement
this querry below works perfect when i assign the us.UserID = 29 but i need to be able to use the @UsersMaxID variable..... when i debug all of my values are right where they need to be... even this on (((   @UsersMaxID ))) but for some reason it will not work with the next select statement...

can someone make the pain go away and help me here..??

erik..

GOSET ANSI_NULLS ON GO
ALTER PROCEDURE AA
ASDECLARE @GenericColumn Varchar (200) DECLARE @GenericValue Varchar (200)
SET @GenericColumn = 'FirstName'SET @GenericValue = 'Erik'
DECLARE @SQL NVARCHAR(4000) DECLARE @UserID INT DECLARE @UsersMaxID INT DECLARE @MaxID INT
declare @tempResult varchar (1000)
-------------------------------------------Define the #Temporary Table----------------------------------------------CREATE TABLE #UsersTempTable ( ID int IDENTITY PRIMARY KEY,
UserID [int], FirstName [varchar](30), LastName [varchar](30), CompanyName [varchar](200), Address1 [varchar](75), Address2 [varchar](75), City [varchar](75),ActiveInd [int], Zip [varchar](10), WkPhone [varchar](12),HmPhone [varchar](12), Fax [varchar](12), Email [varchar](200), Website [varchar](200), UserType [varchar](20),Title [varchar](100),Note [text], StateCD [char](2), CountryCD [char](2), CompanyPhoto [varchar](50), CompanyDescr [varchar](2000)) ---------------------------------------Fill the temp table with the Customers data-----------------------------------SET @SQL = 'INSERT INTO #UsersTempTable (UserID, FirstName, LastName, CompanyName, Address1, Address2, City, ActiveInd, Zip, WkPhone, HmPhone,Fax, Email, Website, UserType, Title, Note, StateCD, CountryCD, CompanyPhoto, CompanyDescr)
Select Users.UserID, Users.FirstName,Users.LastName, Users.CompanyName, Users.Address1, Users.Address2, Users.City, Users.ActiveInd, Users.Zip, Users.WkPhone, Users.HmPhone,Users.Fax,Users.Email,Users.Website, Users.UserType,Users.Title, Users.Note,Users.StateCD, Users.CountryCD,Users.CompanyPhoto,Users.CompanyDescr
FROM USERS
WHERE ' + @GenericColumn +' = ''' + @GenericValue + ''''
EXEC sp_executesql @SQL
SET @MaxID = (SELECT MAX(ID) FROM #UsersTempTable)SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s                           INNER JOIN UserSpecialty us                           ON s.SpecialtyCD = us.SpecialtyCD                           WHERE us.UserID = 29
SELECT * FROM #UsersTempTable

==========================================================================================SET @UsersMaxID = (SELECT UserID From #UsersTempTable WHERE ID = @MaxID)
SELECT SpecialtyName FROM Specialty s                           INNER JOIN UserSpecialty us                           ON s.SpecialtyCD = us.SpecialtyCD                           WHERE us.UserID = 29 <<<<<<<<<<<<<<<<< i need @UserMaxID ........RIGHT HERE

View Replies !

Use A Variable Along With The FROM Clause In SELECT Statement
I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.

What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).

This is the code in my procedure..

DECLARE @tab_list CURSOR
set @tab_list = CURSOR FOR select * from table_list
OPEN @tab_list

DECLARE @tab_name varchar(256)
DECLARE @rec_cnt int
FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt

select count(*) from @tab_name

This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.

Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.

Please help me to construct the select statement that is similiar to

x=<table name>
select * from x
where x is a variable and the table name gets substituted.

what is the syntax for it ?

View Replies !

How Do I Use A Variable To Specify The Column Name In A Select Statement?
How do I use a variable to specify the column name in a select statement?

declare @columnName <type>

set @columnName='ID'

select @columnName from Table1

View Replies !

Put Select Statement In SSIS Variable
Is it possible to add a variable in SSIS like

name of variable: myVar
Scope: Data Flow Task
Data Type: String
Value:SELECT hello FROM blah WHERE (azerty = @[User::pda]) AND (qwerty = @[User::phone])

@[User::pda] and @[User::phone] are also variables in SSIS just like the myVar I made

I know I'm doing something wrong with the data type because it's stores the whole select statement as a string

Help

Worf

View Replies !

Write Data Into Database From A Session?
I'm trying to write data from a session into database but it won't work.
Could someone help me what is wrong with this.

cobjDT = Session("cart")
For each cobjDR in cobjDT.rows
Dim cmdInsert2 as New SQLCommand("order_details", loConn)
             cmdInsert2.CommandType = CommandType.StoredProcedure

cmdInsert2.Parameters.Add(New SqlParameter("@Orders", SqlDbType.int, 4,
"OrderID"))

cmdInsert2.Parameters("@Orders").Value = Request("OrderIDtext")

cmdInsert2.Parameters.Add(New SqlParameter("@PID", SqlDbType.int, 4,
"PID"))

cmdInsert2.Parameters("@PID").Value = Request(cobjDR("PID"))

cmdInsert2.Parameters.Add(New SqlParameter("@PakID", SqlDbType.int, 4,
"PakID"))

cmdInsert2.Parameters("@PakID").Value = Request(cobjDR("PAKID"))

cmdInsert2.Parameters.Add(New SqlParameter("@StyckPris",
SqlDbType.decimal, 9, "StyckPris"))

cmdInsert2.Parameters("@StyckPris").Value = Request(cobjDR("StyckPris"))

cmdInsert2.Parameters.Add(New SqlParameter("@Mangd", SqlDbType.int, 4,
"Mangd"))

cmdInsert2.Parameters("@Mangd").Value = Request(cobjDR("Quantity"))
             loConn.Open()
             cmdInsert2.ExecuteNonQuery()
             loConn.Close()
next

When I execute this an error message comes

Server Error in '/examen' Application.

Input string was not in a correct format.

Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.

Exception Details: System.FormatException: Input string was not in a correct format.

Source Error:

Line 78: cmdInsert2.Parameters("@Mangd").Value = Request(cobjDR("Quantity"))Line 79: loConn.Open()Line 80: cmdInsert2.ExecuteNonQuery()Line 81: loConn.Close()Line 82: next

Source File: D:lofa.mine.nuexamenmembersTMP3thkwo1d0w.aspx    Line: 80

Stack Trace:

[FormatException: Input string was not in a correct format.] System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +723 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +194 ASP.TMP3thkwo1d0w_aspx.Page_Load(Object Sender, EventArgs E) in D:lofa.mine.nuexamenmembersTMP3thkwo1d0w.aspx:80 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +731

Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573

I use same character types in storedProcedure what they are in the
database and when I call the SP on my page the char types are same as
they are in the SP

I don't see what the problem is. Please Help

View Replies !

How To Create A Select Statement With An Increasement Variable?
Example:

Select icount + 1 as icount from table

or

Select counter() as icount from table

The above is wrong ...just a sample to show what I am trying to accomplish.

Is there a function in SQL statement? Thanks.

View Replies !

Return Variable Name As Part Of Select Statement.
hey all,

I have the following query:

ALTER PROCEDURE [dbo].[sp_SelectMostRecentArticle]

AS
BEGIN

DECLARE @article_id INT
SELECT @article_id = (
SELECT TOP 1 article_id
FROM article
ORDER BY article_id DESC
)

DECLARE @comment_count INT
SELECT @comment_count = (
SELECT COUNT(comment_id)
FROM comment
JOIN article ON article_id = comment_article_id
GROUP BY article_id
HAVING article_id = @article_id
)

SELECT TOP 1 article_id, article_author_id,
article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_id
article_author_ip, author_display_name,
category_id, category_name--, comment_count AS @comment_count

FROM article

JOIN author ON author_id = article_author_id
JOIN category ON category_id = article_category_id

GROUP BY article_id, article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_ip,article_author_id,
author_display_name, category_id, category_name

HAVING article_id = @article_id

END
GO

as you can see, im trying to return a comment_count value, but the only way I can do this is by defining the variable.

I have had to do it this way, because I cannot say COUNT(comment.comment_id) AS comment_count or it returns an error that it cant reference the comment.comment_id.

But when change it to FROM article, comment; I get errors about the article_author_id and article_comment_id.

And i cant add a join, because it would return the amount of rows of the comment...

unless someone could help with what i Just decribed (as i would prefer to do it this way), how would i return the variable value as part of the select statement?

Cheers

View Replies !

Getting A Variable That Has A SELECT Statement To Return Results
I have concatenated a long Select Statement and assigned it to a variable. (i.e.)

@a = Select * from foo ---Obviously mine is much more robust

How do I execute @a to actually Select * from foo?

View Replies !

Storing Results Of Select Statement In @variable

I'm new to sql stored procedures but I would like to store the results
of an sql statement in a variable such as:

SET @value = select max(price) from product

but this does not work, can someone tell me how I would go
about in storing the results in a variable.

@value is declared as int

Thanks in advance,
Sharp_At_C

View Replies !

How To Assign The SELECT Statement Output To A Local Variable?

In my program i have function that will get one value from Database.
Here i want to assign the output of the sql query to a local variable.
Its like select emp_id into Num from emp where emp_roll=222;
here NUM is local variable which was declared in my program.
Is it correct.?
can anyone please guide me..?

View Replies !

Unable To Create Variable Select Statement In For Each Loop
What I'm trying to do is this;

I have a table with Year , Account and Amount as fields. I want to

SELECT Year, Account, sum(Amount) AS Amt

FROM GLTable

WHERE Year <= varYear

varYear being a variable which is each year from a query

SELECT Distinct Year FROM GLTable

My thought was that I would need to pass a variable into a select statement which then would be used as the source in my Data Flow Task.

What I have done is to defined two variables as follows

Name: varYear (this will hold the year)

Scope: Package

Data type: String

Name:vSQL (This will hold a SQL statement using the varYear)

Scope: Package

Data type: String

Value: "SELECT Year, Account, sum(Amount) AS Amount FROM GLTable WHERE Year <=" + @[User::varYear]

I've created a SQL Task as follows

Result set: Full Result Set

Connection Type: OLE DB

SQL Statement: SELECT DISTINCT Year FROM GLTable

Result Name: 0

Variable Name: User::varYear

Next I created a For Each Loop container with the following parameters

Enumerator: Foreach ADO Enumerator

ADO Object source Variable: User::varYear

Enumeration Mode: Rows in First Table

I then created a Data Flow Task in the Foreach Loop Container and as the source used OLE DB Source as follows

Data Access Mode: SQL Command from Variable

Variable Name: User::varYear

However this returns a couple of errors "Statement(s) could not be prepared."

and "Incorrect syntax near '='.".

I'm not sure what is wrong or if this is the right way to accomplish what I am trying to do. I got this from another thread "Passing Variables" started 15 Nov 2005.

Any help would be most appreciated.

Regards,

Bill

View Replies !

Store Session State In Sql 2000?
I'm currently storing session state in a sql 2000 server for my vs.net 2002 projects. I'm currently developing a new project using vs.net 2005 and was wondering if I could store the session state in the same sql server. Does anyone know if this is possible? If so can someone point me in to an article or code example. All of the examples I have come across are for sqlExpress.
Thanks in advanceJason

View Replies !

Combing In A Cursor, A Select Statement With The WHERE Clause Stored In A Variable
Hi
I am ramesh here from go-events.com
I am using sql mail to send out emails to my mailing list

I have difficulty combining a select statement with a where clause stored in a variable inside a cursor

The users select the mail content and frequency of delivery and i deliver the mail

I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.

Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code
that does not work

For example

DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3

I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary

How do I combine the select statement with the where clause?

Help me...I need help urgently

View Replies !

Set Variable Based On Result Of Procedure OR Update Columns Fromsproc Result
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg

View Replies !

Random Selection From Table Variable In Subquery As A Column In Select Statement
Consider the below code: I am trying to find a way so that my select statement (which will actually be used to insert records) can randomly place values in the Source and Type columns that it selects from a list which in this case is records in a table variable. I dont really want to perform the insert inside a loop since the production version will work with millions of records. Anyone have any suggestions of how to change the subqueries that constitute these columns so that they are randomized?

SET NOCOUNT ON

Declare @RandomRecordCount as int, @Counter as int
Select @RandomRecordCount = 1000

Declare @Type table (Name nvarchar(200) NOT NULL)
Declare @Source table (Name nvarchar(200) NOT NULL)
Declare @Users table (Name nvarchar(200) NOT NULL)
Declare @NumericBase table (Number int not null)

Set @Counter = 0

while @Counter < @RandomRecordCount
begin
Insert into @NumericBase(Number)Values(@Counter)
set @Counter = @Counter + 1
end

Insert into @Type(Name)
Select 'Type: Buick' UNION ALL
Select 'Type: Cadillac' UNION ALL
Select 'Type: Chevrolet' UNION ALL
Select 'Type: GMC'

Insert into @Source(Name)
Select 'Source: Japan' UNION ALL
Select 'Source: China' UNION ALL
Select 'Source: Spain' UNION ALL
Select 'Source: India' UNION ALL
Select 'Source: USA'

Insert into @Users(Name)
Select 'keith' UNION ALL
Select 'kevin' UNION ALL
Select 'chris' UNION ALL
Select 'chad' UNION ALL
Select 'brian'

select
1 ProviderId, -- static value
'' Identifier,
'' ClassificationCode,
(select TOP 1 Name from @Source order by newid()) Source,
(select TOP 1 Name from @Type order by newid()) Type

from @NumericBase

SET NOCOUNT OFF

View Replies !

How To Write A SELECT Statement And Store The Result In A Session Variable

I'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this. First I have a database with three columns ContactID

I'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this.

First I have a database with three columns

ContactID