Need Help With Query Statement 'IN' Clause.

IF ELSE Statement In WHERE Clause
actually i need to do a sql report... there are 3 parameters (date from. date to, issue_user_id) that are required in order to retrieve the data...now i am facing one problem, if i just enter the date_from and date_to, and leave the issue_user_id blank, i wish to retrieve all the data, but i can't do it.

i have try to use:

if @IssueUserID = ' ' Select....(blah blah ) else select (blah blah)...it is long and work in Query analyzer but no working in .NET Reporting services.... :confused: is it possible to enter IF ..ELSE statement in WHERE clause?hope that u all can help.....

================================================== ==
SELECT REPLACE(REPLACE(REPLACE(REPLACE(tbl_Receipt.Paymen tRefID, '1', 'Deposit for Admission'), '2', 'Consultation Services'), '3', 'Medical Fees'), '4','Others') AS PaymentRefID, tbl_Receipt.ReferenceNo, tbl_Receipt.ReceiptDate, CONVERT(varchar(10), tbl_Receipt.ReceiptDate, 103) AS ReceiptDt, tbl_Receipt.TotalAmountPaid, tbl_Receipt.Payee, tbl_ReceiptDT.PaymentTypeID, tbl_PaymentType.PaymentType, tbl_ReceiptDT.Amount,
tbl_User.Name, tbl_Receipt.IssueUserID, tbl_User.Designation
FROM tbl_Receipt WITH (nolock) INNER JOIN
tbl_ReceiptDT WITH (nolock) ON tbl_Receipt.ReceiptID = tbl_ReceiptDT.ReceiptID INNER JOIN
tbl_PaymentType WITH (nolock) ON tbl_ReceiptDT.PaymentTypeID = tbl_PaymentType.PaymentTypeID INNER JOIN
tbl_User ON tbl_Receipt.IssueUserID = tbl_User.UserID

WHERE (tbl_Receipt.ReceiptDate BETWEEN CONVERT(datetime, @DateFrom, 103) AND CONVERT(datetime, @DateTo, 103)) AND
(tbl_Receipt.IssueUserID = @IssueUserID)
ORDER BY tbl_User.UserID, tbl_ReceiptDT.PaymentTypeID

View Replies !

---

Right Use Of Like In An Or Clause Of Where Statement
I have the below where clause on a select

where substring(pa.other_id_number,5,1) = @monthid
and pa2.df_patstatus like 'act%'
and ((pa2.df_institutionname not like ('ACT%')
or pa2.df_institutionname not like ('county%')))

It returns records that have either one of the not like statements. If I comment out the line and use below it will work for one of the statements

where substring(pa.other_id_number,5,1) = @monthid
and pa2.df_patstatus like 'act%'
and pa2.df_institutionname not like ('ACT%')

How can I get the two to work together. I thought the parenthesis would work but no luck.

View Replies !

---

LIKE Clause In IF Statement
Can the like clause be used in IF statement or only applicable to SELECT statement ?

e.g.

IF (@lADDRESS LIKE '%P.O. BOX')

BEGIN

   PRINT 'IGNORE ADDRESS'

END

Thank you

Yog

View Replies !

---

Using Case Statement With WHERE Clause...
Hi,
I need help to use CASE Statement within my WHERE Clause. I want to change the WHERE Clause based on my condition as following:
SELECT ...
FROM ...
WHERE  (condition)
AND       (condition)
AND       (condition)
AND       (
                    CASE Table.Category
                          WHEN 'Drinks' THEN
                               Table1.Field1 = 1 -- Problem line
                          ELSE
                               Table1.Field1 = 1 AND Table1.Field2 = 1 -- Problem line
                   END
             )
In the above case, my WHERE Clause is dependent on one of the fields in a table. If it has a certain value then only Table1.Field1 is used otherwise Table1.Field1 & Field2 come into action.
I am getting error on the mentioned line (Problem Line). Since CASE is an expression and does not execute a statement, can anyone help me to get my WHERE Clause working...
Thanks in advance...

View Replies !

---

If/Case Statement In Having/Where Clause - Please Help Me.
Hi!I want to make search engine and I have problem with query for this search. User can write username to search or text to search or both. So at first I made query for each event individually: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int
AS
DECLARE @date DATETIME
SET @date = DATEADD(day,@days,GETDATE())
IF @username IS NOT NULL AND @search_text IS NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (dbo.aspnet_Users.UserName = @username) AND (forum_topics_1.post_current_date >= @date)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%')
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
ELSE
IF @username IS NOT NULL AND @search_text IS NOT NULL
BEGIN
SELECT COUNT(dbo.forum_topics.post_user_id) AS UserPosts, forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_id,
forum_topics_1.post_current_date, forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id,
dbo.forum_kategorie.forum_kat_kolor, dbo.forum_kategorie.forum_kat_nazwa, COUNT(DISTINCT forum_topics_2.post_id) + 1 AS post_total
FROM dbo.forum_topics INNER JOIN
dbo.aspnet_Users ON dbo.forum_topics.post_user_id = dbo.aspnet_Users.uID INNER JOIN
dbo.forum_topics AS forum_topics_1 ON dbo.aspnet_Users.uID = forum_topics_1.post_user_id INNER JOIN
dbo.forum_kategorie ON forum_topics_1.post_cat_id = dbo.forum_kategorie.forum_kat_id LEFT OUTER JOIN
dbo.forum_topics AS forum_topics_2 ON forum_topics_1.post_id = forum_topics_2.post_parrent_id
GROUP BY forum_topics_1.post_title, dbo.aspnet_Users.UserName, forum_topics_1.post_parrent_id, forum_topics_1.post_id, forum_topics_1.post_current_date,
forum_topics_1.post_stick, forum_topics_1.post_user_id, forum_topics_1.post_cat_id, dbo.forum_kategorie.forum_kat_kolor,
dbo.forum_kategorie.forum_kat_nazwa
HAVING (forum_topics_1.post_parrent_id = 0) AND (forum_topics_1.post_current_date >= @date) AND (forum_topics_1.post_title LIKE '%' + @search_text + '%') AND
(dbo.aspnet_Users.UserName = @username)
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
END
RETURN This 3 queries are different only by Having clause. So I want to put If/Case in Having clause, but I have problem. Can anyone help me?Also I want to make paging from SQL level, so if anyone will be so helpful and make working this query with this: ALTER PROCEDURE [dbo].[Show_Search_Topics]
@username varchar(200),
@search_text varchar(200),
@days int,
@page int,
@page_size int
AS
WITH Results As
(
//QUERY)

)
SELECT * FROM Results
WHERE RowNumber BETWEEN (@page_size * @page + 1) AND (@page_size * (@page + 1))
ORDER BY forum_topics_1.post_stick DESC, forum_topics_1.post_current_date DESC
RETURN  I will be grateful :-) 

View Replies !

---

Case Statement In Where Clause
I need a SQL statement that selects a specific year (@yr type int) in the "createddate" column...if this @yr is equal to 0 then I want to select ALL columns regardless of the year...This is what I have so far, but it doesnt work...SELECT * FROM tblUsersWHERE year(CreatedDate)=CASEWHEN @yr<>'0' THEN @yrELSE NOT NULLEND

View Replies !

---

Case Statement In Where Clause
If you could help me with my syntax i would really appreciateit. I'm trying to change the where clause on the fly, but it'sgiving me a syntax error.Hopefully from what I have below you can tell what i'm afterthe first part should evaluate a boolean expression, then if true,search using one field, otherwisesearch using a different fieldWHERECase WHEN @myCompany = 933THEN tblClient.companycode = 933 --problem lineELSEtblCase.clientcode = @myClient --problem lineENDAnd tblCase.status = 'Active'thank you!!

View Replies !

---

CASE Statement In Where Clause?
Can anyone tell me if it's possible to use a Case statement in a Whereclause, and if so, the proper syntax?J.R.Largo SQL ToolsThe Finest Collection of SQL Tools Availablehttp://www.largosqltools.com

View Replies !

---

Case Statement In Where Clause
Hello

I want to put a case statement into a where clause but it's not working. Can anybody help, or tell me a better way of doing this

Thanks very much

declare @param varchar (100)
select @param = 'mytext

select
colA
,colB
,colC
from
mytable
where
(case
when @param is null then colA = 'group'
else colA = 'single'
end)

View Replies !

---

HAVING Clause Is A Case Statement???
i have wrote a query which compares two tables, returning anywhere the qty is not the same in each table:

(simple ex)

Select order_no
from table1
inner join table2
on table1.order_no = table2.order_no
group by order_no
having table1.Qty<> table2.Qty

BUT... I need to add a table3, where there maybe (or may not be enters - thus a left join). If there is an entry in table3 then use qty in table3 and not table1... so having becomes:

CASE WHEN table1.Qty<> table3.Qty
THEN table3.Qty<> table2.Qty
ELSE table1.Qty<> table2.Qty END

but how do i actually write this?

View Replies !

---

Case Statement In Where Clause
can i use case statement in where clause.
The scenario is as follow

declare @param int
select
*
from
table1
where
column1 = 'asdf'
column2= @param

In the above sql, if @param is '' then i don't want to include it in the where clause.I can use "like" statement for that, but i want exact value not partial value.


can i use case in where clause so that if @param is '' then i will not include in the where clause

View Replies !

---

Case Statement In Where Clause?
Can I do the following? Keep getting an error stopping at the first < of the where clause.


declare @mon as int, @yr as int, @myDate as varChar(20)
set @yr=2006
set @mon=1
set @mydate='01/31/2006 23:59:59'

select 0 as DTAP, 0 as DT, 0 as TD, 0 as HIB, 0 as IPV, 0 as MMR, 0 as HEPB, 0 as _VAR, count(v.procedureKey) as FLU, 0 as PPV23, 0 as PCV7, v.chartID, max(rs1.dateService) as dateService from dbo.tbl1 v,
(select distinct dateService, chartID, procedureKey from fhc.dbo.tbl1 where (datePart(year,dateService)=@yr and datePart(month,dateService)=@mon) and (procedureKey='90657' or procedureKey='90658')) as rs1
where (v.chartID=rs1.chartID) and (v.procedureKey=rs1.procedureKey) and
(case when @mon=1 then dateDiff(month,dateService,@myDate)< 216
when @mon=2 then dateDiff(month,dateService,@myDate)<244
when @mon=3 then dateDiff(month,dateService,@myDate)<275
when @mon=4 then dateDiff(month,dateService,@myDate)<305
when @mon=5 then dateDiff(month,dateService,@myDate)<336
when @mon=6 then dateDiff(month,dateService,@myDate)<366
when @mon=7 then dateDiff(month,dateService,@myDate)<32
when @mon=8 then dateDiff(month,dateService,@myDate)<63
when @mon=9 then dateDiff(month,dateService,@myDate)<93
when @mon=10 then dateDiff(month,dateService,@myDate)<124
when @mon=11 then dateDiff(month,dateService,@myDate)<154
when @mon=12 then dateDiff(month,dateService,@myDate)<185
end) group by v.chartID, rs1.procedureKey

View Replies !

---

Using CASE Statement In A WHERE Clause
Is it possible to use CASE within a WHERE?

I have a query which is something like this, but it returns an error:

 

SELECT * FROM tablex

WHERE

CASE WHEN 'sexec' IS NOT NULL THEN

dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' and dm_sexec LIKE 'sexec' ELSE

dm_marque = 'foo' AND year(dm_date) LIKE 'pyear' AND dm_month LIKE 'pmonth' AND dm_weekno LIKE 'pweek' END

GROUP BY dm_marque

 

In this case sexec is a form parameter, if something is passed then I need to include it in the where statement, if it isn't I need to include something else.  I am using CASE because there are three of these parameters and I want it to stop evaluating as soon as it matches as more than one may match but I only want to apply one.

Many thanks

Karen

 

View Replies !

---

WHERE Clause Of An INSERT INTO Statement
 

Hi,
 
I have the following bit of SQL:
 
 



Code Block
INSERT INTO [INTRANETSQLEXPRESS].Trapped.dbo.TBL_Debtsolv (Debtsolv_ID, Payment_Amount, Payment_Status, Client_Status)
SELECT Client.ID AS ClientID,
InitialInstallment.OffsetAmountExpected AS FirstExpectedPayment
,
CASE WHEN Payment.TotalPaid <= 0 OR LatestPaymentDate IS NULL
THEN 'No Money Paid'
WHEN Payment.TotalPaid < InitialInstallment.OffsetAmountExpected
AND Payment.TotalPaid >0
AND InitialInstallment.DateExpected + ISNULL(Schedule.DayOffset, 0) >GETDATE()
THEN 'Still Awaiting - Part Paid'
WHEN Payment.TotalPaid >= InitialInstallment.OffsetAmountExpected
THEN '1st Payment Made'
WHEN Payment.TotalPaid < InitialInstallment.OffsetAmountExpected
AND InitialInstallment.DateExpected + ISNULL(Schedule.DayOffset, 0) <GETDATE()
THEN 'Late - First Payment Not Made'
ELSE 'Status Unclear'
END
AS Status
, CASE WHEN
Client.Status IN(0,1,2,3,4,5,6,7)
THEN 'In Preparation'
WHEN Client.Status IN(8,9)
THEN 'Active'
ELSE 'Inactive'
END AS ClientStatus
FROM SALEEN.Debtsolv.dbo.Client_Contact as Client
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Payment_Schedule AS Schedule
ON Client.ID = Schedule.ClientID
INNER JOIN SALEEN.Debtsolv.dbo.Client_LeadData CLD
ON Client.ID = CLD.Client_ID
INNER JOIN SALEEN.Debtsolv.dbo.Type_Client_Status TCS
ON Client.Status = TCS.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Type_Lead_Source TLS
ON CLD.SourceID = TLS.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Type_Lead_Source_Group AS LeadGroup
ON TLS.[Group] = LeadGroup.ID
LEFT OUTER JOIN SALEEN.Debtsolv.dbo.Users [User]
ON CLD.Counsellor = [User].ID
LEFT OUTER JOIN (SELECT ClientID
, SUM(CAST((Amount + ISNULL(AmountOffset, 0))AS Money) / 100) AS OffsetAmountExpected
, MAX(DateExpected) AS DateExpected
FROM SALEEN.Debtsolv.dbo.Payment_Schedule AS PS
WHERE (SequenceID <=(SELECT
CASE WHEN NumInitialInstalments = 0 THEN 1
ELSE IsNull(NumInitialInstalments, 1)
END
AS NumInitialInstalments
FROM SALEEN.Debtsolv.dbo.Client_LeadData AS LD
WHERE (Client_ID = PS.ClientID)))
GROUP BY ClientID
)
AS InitialInstallment
ON Client.ID = InitialInstallment.ClientID
LEFT OUTER JOIN (SELECT Receipt.ClientID
, SUM(CAST(Receipt.Amount AS Money)) / 100 AS TotalPaid
FROM SALEEN.Debtsolv.dbo.Payment_Receipt Receipt
INNER JOIN SALEEN.Debtsolv.dbo.Type_Payment_Status Type
ON Receipt.Status = Type.ID
WHERE (Receipt.Status = 5)
GROUP BY ClientID)
AS Payment
ON Client.ID = Payment.ClientID
LEFT OUTER JOIN (SELECT ClientID
, MAX(ID) AS MaxPSID
, MAX(LastPayment) AS LatestPaymentDate
FROM SALEEN.Debtsolv.dbo.Payment_Schedule Schedule
WHERE (NOT (LastPayment IS NULL)
AND LastPayment > CONVERT(DATETIME, '1980-01-01 00:00:00', 102))
GROUP BY ClientID)
AS LatestPaymentDate
ON Client.ID = LatestPaymentDate.ClientID
INNER JOIN (SELECT ClientID
, MAX(SequenceID) AS LFPDSequenceID
FROM SALEEN.Debtsolv.dbo.Payment_Schedule PS
WHERE (PaymentType = 1)
GROUP BY ClientID)
AS LastPayment
ON Client.ID = LastPayment.ClientID
AND Schedule.ClientID = LastPayment.ClientID
AND Schedule.SequenceID = LastPayment.LFPDSequenceID
WHERE Client.ID = TBL_Debtsolv.Debtsolv_ID
 
 

 
Executing this statement gives the following error:



Code Block
 
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "TBL_Debtsolv.Debtsolv_ID" could not be bound.
 
 
I think thsi is soemthing to do with referencing another table in the INSERT into command as if I put:
 



Code Block
WHERE Client.ID = '12065'
 
 







The statement executes with no problem.  I think I have read in some other threads that you cannot reference another table in the WHERE part of an INSERT INTO clause but cannot find out how I can make this work.
 
Most of the statement comes from a pre-made report from one of our systems and I have slighlty changed it to insert the data into another database that we have.
 
Any suggestions would be greatly appreciated
 
Thanks

View Replies !

---

Where Clause In Insert Statement
Hello all,

I've got a question. I have an array that I am inserting into a table. The code is in classic asp and looks like this:

SQL1 = "INSERT INTO transactionz (classid, userid) values (" & listOfAnswers(i) & ",8)

The problem is that I want to only insert values that have the value "1". listofAnsers is an array that returns values of "1" and "2". If there a way to limit the inserts to values of "1". Another words, I want to just insert the values of "1" into the table. I know that you experts would say I should control this on the code side and thats true, however, I can't (because I don't control the code side) so is there a way to do this via SQL? Am I making any sense? I was thinking that I needed to add a "where" clause at the end of the code, but I don't know where to go from here.

View Replies !

---

CASE Statement On A WHERE Clause?
I am trying to create a condition if the value of a parameter is null then pass a certain WHERE condition to my query. I keep on getting this error:

Line 15: Incorrect syntax near '='.

this is my query that lies on a PROC:


SELECT count(a.pEngr_Item_ID) as assembly_count FROM Engr_Item a
INNER JOIN Engr_BOM_Control b
ON a.pEngr_Item_ID=b.fEngr_Item_ID
WHERE
b.Bill_Type=@v_Bill_Type and
a.Item_No=@v_Item_No and
case when @v_Rev_Lett is not null then a.Item_No=@v_Rev_Lett else a.Item_No=@v_Rev_Lett end

View Replies !

---

CASE Statement On A WHERE Clause?
I need to have a CASE statement inside a WHERE clause. Is this possible? Here is my WEHRE clause. Any suggestions are appreciated:


WHERE
--r.pBOM_ID=d.fEngr_BOM_ID and
r.fItem_ID=a.pEngr_Item_ID and
r.level<=@v_level+1 and
case when @v_showrootlevel=1 then r.level>1 else r.level>1 end
order by r.pID

View Replies !

---

IF Statement In SELECT WHERE Clause
Hi Everyone,

I have the following stored procedure, I would like to use
IF statement or something of the sort in the where clause i.e.
The last line in the SP is: AND (category.categoryID = @categoryID),
I only want to check this, if @categoryID is not = 12.
So can I do something like this:

IF @categoryID <> 12
AND (category.categoryID = @categoryID)

STORED PROCEDURE:

CREATE PROCEDURE sp_get_total_risk_patients
@categoryID int
AS

SELECT COUNT(DISTINCT patient.patientID) AS total_patients
FROM patient
INNER JOIN patient_record ON patient.patientID = patient_record.patientID
INNER JOIN sub_category ON sub_category.sub_categoryID = patient.sub_categoryID
INNER JOIN category ON category.categoryID = sub_category.categoryID
WHERE risk = 6
AND (completed_date = '' OR completed_date IS NULL)
AND (category.categoryID = @categoryID)

View Replies !

---

Returning An IN Clause From A CASE Statement
Hi all,

I am passing in a variable into a CASE statement. Based on the value, I want to return a set of values in an IN clause. Here is an example:

(The where clause will use a field called 'Location')


DECLARE @strTest as Varchar(50)
SET @strTest = 'HI'

SELECT * FROM [SomeTable]
WHERE
CASE @strTest
WHEN 'HI' THEN Location IN('1', '2', '3')
END
ORDER BY Location


Is this possible to do?

Sanctos

View Replies !

---

'Case' Statement Inside 'Where' Clause
Hi

I've been trying to put a simple case statement into my 'where' clause but having no luck, is there another way to do the following?

DECLARE @searchCriteria Int
SET @searchCriteria = 2

SELECT column1, column2 FROM TABLE WHERE
CASE @searchCriteria
WHEN 1 THEN (column3 = 1000100)
WHEN 2 THEN (column3 = 1000101)
END CASE



...cheers

View Replies !

---

Can We Have An Inner Join Clause In An Update Statement
Hi,
I'm trying to inner join an update statement.
Something like this:

update #point_connection_temp AS a inner join #point_connection_temp_two as b on a.key_fld = b.key_fld set a.next_point = b.next_point
where #point_connection_temp.next_point is null
order by a.key_fld

I'm getting an error message:Incorrect syntax error near AS
Any help will be greatly appreciated.Thank you!!!!!!!!!1

View Replies !

---

Use A Variable Along With The FROM Clause In SELECT Statement
I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.

What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).

This is the code in my procedure..

DECLARE @tab_list CURSOR
set @tab_list = CURSOR FOR select * from table_list
OPEN @tab_list

DECLARE @tab_name varchar(256)
DECLARE @rec_cnt int
FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt

select count(*) from @tab_name

This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.

Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.

Please help me to construct the select statement that is similiar to

x=<table name>
select * from x
where x is a variable and the table name gets substituted.

what is the syntax for it ?

View Replies !

---

Conditional Where Clause W/ Case Statement Possible?
Greetings,
 
After many hours search many forums and many failed experiments, I figure it's time to turn to the experts.
 
I need to execute a query that changes the returned data based upon a parameter's value.  In my example below, the lob field contains both text values and nulls.
 

SELECT uniqueID, lob, xdate
FROM mytable
WHERE

CASE WHEN @myparam = 'ALL'

THEN

xdate >= '2007-09-01'
ELSE

xdate >= '2007-09-01' or
lob = @myparm
END
 
I've experimented with various forms of the LIKE function, checking for null/not null and keep coming up blank.
 
I thought about using an IF statement and creating different versions of the entire statement, however, in real-life I need to do this with four fields using four parameters (one for each field).  The permutations are a little too much.
 
Any ideas?
 
Rob
 

View Replies !

---

Case Statement On Where Clause If Parameter =NULL
I am working on a Function that takes multiple parameters. I have a query that populates a temporary table, and then it processes some logic. My question is, if the parameter is passed as null, I dont want the query to be affected by this null value. Rather, I would like to not pass it at all to the query. So if the parameter is NULL, dont pass it through the query. I have the following but its not compiling right:


SELECT bom.pEngr_BOM_ID , bom.fEngr_Item_ID, det.pEngr_BOM_Detail_ID, 1, bom.Bill_Type, bom.Rev_Ltr, bom.Series_Ltr
FROM dbo.Engr_BOM_Control bom WITH (nolock)
INNER JOIN dbo.Engr_BOM_Detail det WITH (nolock)
ON det.fEngr_BOM_ID=bom.pEngr_BOM_ID
WHERE bom.pEngr_BOM_ID=@v_pEngr_BOM_ID
AND det.fEngr_BOM_ID=@v_pEngr_BOM_ID
CASE WHEN @v_Bill_Type IS NOT NULL THEN
AND bom.Bill_Type=@v_Bill_Type
END

View Replies !

---

Gridview Select Statement With User.identity.name In The Where Clause
Hello everyone,
I have a view, NAS_vPosition that has a coloumn vLogin_Acting and I want to use the user.identity.name to select the row from this table that matches.
So far i have tried:
SelectCommand = "Select * FROM NAS_vPosition WHERE vLogin_Acting = ' <%=User.Identity.Name %> ' "
with no success.
Any help is appreciated

View Replies !

---

Select Statement Using Multi-list Box Values For WHERE IN SQL Clause
I have a gridview that is based on the selection(s) in a listbox.  The gridview renders fine if I only select one value from the listbox.  I recive this error though when I select more that one value from the listbox:
Syntax error converting the nvarchar value '4,1' to a column of data type int.  If, however, I hard code 4,1 in place of @ListSelection (see below selectCommand WHERE and IN Clauses) the gridview renders perfectly.
<asp:SqlDataSource ID="SqlDataSourceAll" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT DISTINCT dbo.Contacts.Title, dbo.Contacts.FirstName, dbo.Contacts.MI, dbo.Contacts.LastName, dbo.Contacts.Suffix, dbo.Contacts.Dear, dbo.Contacts.Honorific, dbo.Contacts.Address, dbo.Contacts.Address2, dbo.Contacts.City, dbo.Contacts.StateOrProvince, dbo.Contacts.PostalCode FROM dbo.Contacts INNER JOIN dbo.tblListSelection ON dbo.Contacts.ContactID = dbo.tblListSelection.contactID INNER JOIN dbo.ListDescriptions ON dbo.tblListSelection.selListID = dbo.ListDescriptions.ID WHERE (dbo.tblListSelection.selListID IN (@ListSelection)) AND (dbo.Contacts.StateOrProvince LIKE '%') ORDER BY dbo.Contacts.LastName">
<SelectParameters>
<asp:Parameter Name="ListSelection" DefaultValue="1"/>
</SelectParameters>
</asp:SqlDataSource>
The selListID column is type integer in the database.
I'm using the ListBox1_selectedIndexChanged in the code behind like this where I've tried using setting my selectparameter using the label1.text value and the Requst.From(ListBox1.UniqueID) value with the same result:
 
Protected Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
Dim Item As ListItem
For Each Item In ListBox1.Items
If Item.Selected Then
If Label1.Text <> "" Then
Label1.Text = Label1.Text + Item.Value + ","
Else
Label1.Text = Item.Value + ","
End If
End If
Next
Label1.Text = Label1.Text.TrimEnd(",")
SqlDataSourceAll.SelectParameters("ListSelection").DefaultValue = Request.Form(ListBox1.UniqueID)
End Sub
What am I doing wrong here?  Thanks!

View Replies !

---

Using A Field Alias For A CASE Statement In A GROUP BY Clause
When I created a CASE statement (This is at work, Pat:)) it is about 30-40 lines long. I gave it a name and set the name = to the case statement:

ie,

SELECT fieldname1 =
CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END
, fieldname2
, fieldname3
FROM tablename1
GROUP BY CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END, , fieldname2, fieldname3

etc.


The long CASE statement in my GROUP BY is awkward to me. Is this the only way to do it? I tried using the fieldname1 but it comes back as an invalid field name and asks for the "expression".

Regards,

Dave

View Replies !

---

Escape Clause Causes Error In Lookup Modified Sql Statement
I need to use a modified SQL statement for a lookup component. It has an escape clause in it and this causes error:

select * from dbo.typecustomer where ? like '%'+type_subtype +'%'
ESCAPE '_'

Is this is a bug? Any help will be greatly appreciated.

Thanks

Akin

View Replies !

---

Trying To Use The Results Of A Case Statement In My Select List In My WHERE Clause?
I am fairly new with SQL and still learning.  I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me.  Here is the code I have so far:

SELECT
l.loanid,
p.investorid,
l.duedate,
case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate,
pc.interestrate 
FROM loan l
inner join participation p on p.loanid = l.loanid
inner join paymentchange pc on pc.loanid = l.loanid
where p.investorid = '12345' and RateDueDate is not null
order by l.loanid, pc.duedate

I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table.  Any help would be greatly appreciated.

Thanks!

 

View Replies !

---

SQL Statement: Group By And Where Clause Do Not Display Null Rows
 
The following is a simplified version of my SQL statement.  I am attempting to do a simple count(*) with two groupings and a where clause.  This is Select command for a GridView.  However, I am unable to display zeros.  The rows are completely missing and I would greatly appreciate someone's help.  I have already tried Group By All, but that, unfortunately, does not work.  Here is my SQL statement:
 
"SELECT [GENDER], [RACE], COUNT(*) FROM [TABLE] WHERE ([COLUMNNAME] ='SOMETHING') GROUP BY [GENDER], [RACE]"

 

Thanks for the help in advance!

View Replies !

---

Combing In A Cursor, A Select Statement With The WHERE Clause Stored In A Variable
Hi
I am ramesh here from go-events.com
I am using sql mail to send out emails to my mailing list


I have difficulty combining a select statement with a where clause stored in a variable inside a cursor

The users select the mail content and frequency of delivery and i deliver the mail

I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.

Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code
that does not work

For example

DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3

I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary

How do I combine the select statement with the where clause?

Help me...I need help urgently

View Replies !

---

Using The ORDER BY Clause When The Ordered Column Is Not Needed In The SELECT Statement
Greetings,
 
I have a C# application that calls a stored procedure to query the database (MSSQL 2005).   I only have one field/column returned from the query but I need that column ordered.
 
How do I use the ORDER BY clause without returning the index column which does the sorting?  The first example is NOT what I want.  I want something that works like the second example which only returns the 'Name' column.
 

ALTER PROCEDURE [dbo].[MyProcedure]



AS

BEGIN

SELECT DISTINCT A.Name, A.index

FROM
...
...
ORDER BY A.[Index], A.Name ASC

END
 
 

ALTER PROCEDURE [dbo].[MyProcedure]



AS

BEGIN

SELECT DISTINCT A.Name
FROM
...
...
ORDER BY A.[Index]

END
 
Thanks

View Replies !

---

Unable To Pass Queue Name In A Parameter For The FROM Clause Of RECEIVE Statement
I'm writing some generalized stored procedures for use form managed code.  The following stored proc works great:
 
CREATE PROCEDURE fnd_Send (
        @Message VARCHAR(5000),
        @Contract SYSNAME,
        @MessageType SYSNAME,
        @FromService SYSNAME,
        @ToService VARCHAR(100),
        @Encrypted Bit
)
AS
        BEGIN
                DECLARE @Handle UNIQUEIDENTIFIER;
               
                BEGIN DIALOG CONVERSATION @Handle     
                        FROM SERVICE @FromService
                        TO SERVICE @ToService
                        ON CONTRACT @Contract
                        WITH ENCRYPTION = OFF;
                       
                SEND ON CONVERSATION @Handle
                        MESSAGE TYPE @MessageType(@Message);
        
Notice the use of SYSNAME parameters €“ translating the parameter into an object name - allows it to work in the BEGIN DIALOG statement when an system object is needed.  Works create and cues up generic messages.
 
The following will not compile:
 
CREATE PROCEDURE fnd_Receive (
        @Queue SYSNAME,
        @Message VARCHAR(5000) out,
        @MessageType SYSNAME out
)
AS
        BEGIN
                DECLARE @Handle UNIQUEIDENTIFIER;
 
                RECEIVE TOP (1)
                        @Handle = conversation_handle,                 
                        @MessageType = message_type_name,                  
                        @Message = message_body            
                FROM @Queue;                                       
        END
GO
 
It won€™t let me use the SYSNAME field @Queue in the FROM clause.  I€™m getting an unfriendly:
 
Msg 102, Level 15, State 1, Procedure fnd_Receive, Line 15
Incorrect syntax near '@Queue'.
 
It looks like maybe I can€™t bind a variable in the FROM clause €“ perhaps like you cannot in a SELECT statement.  I can fall back to dynamic SQL in the stored proc or in the managed code; I was hoping not to.
 

Can anyone shed any light on this?  Also, are there any other techniques I'm missing to avoid falling back to a dynamic SQL statement.
 
Thank you in advance -
 
Jeff Odell
Catapult Systems

View Replies !

---

Order By Clause In DECLARE CURSOR Select Statement Won't Compile
The stored procedure, below, results in this error when I try to compile...


Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69
Incorrect syntax near the keyword 'ORDER'.

However the select statement itself runs perfectly well as a query, no errors.

The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs.

What gives with this?

Thanks in advance
R.

The code:




Code Snippet

-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF object_id('InsertImportedReportData ') IS NOT NULL
    DROP PROCEDURE InsertImportedReportData
GO
-- =============================================
-- Author:        -----
-- Create date:
-- Description:    inserts imported records, marking as duplicates if possible
-- =============================================
CREATE PROCEDURE InsertImportedReportData
    -- Add the parameters for the stored procedure here
    @importedReportID int,
    @authCode varchar(12)
AS
BEGIN
    DECLARE @errmsg VARCHAR(80);

--    SET NOCOUNT ON added to prevent extra result sets from
--     interfering with SELECT statements.
    SET NOCOUNT ON;

    --IF (@authCode <> 'TX-TEC')
    --BEGIN
     --   SET @errmsg = 'Unsupported reporting format:' + @authCode
      --  RAISERROR(@errmsg, 11, 1);
    --END

    DECLARE srcRecsCursor CURSOR LOCAL
    FOR    (SELECT
           ImportedRecordID
          ,ImportedReportID
          ,AuthorityCode
          ,[ID]
          ,[Field1] AS RecordType
          ,[Field2] AS FormType
          ,[Field3] AS ItemID
          ,[Field4] AS EntityCode
          ,[Field5] AS LastName
          ,[Field6] AS FirstMiddleNames
          ,[Field7] AS Title
          ,[Field8] AS Suffix
          ,[Field9] AS AddressLine1
          ,[Field10] AS AddressLine2
          ,[Field11] AS City
          ,[Field12] AS [State]
          ,[Field13] AS ZipFull
          ,[Field14] AS OutOfStatePAC
          ,[Field15] AS FecID
          ,[Field16] AS Date
          ,[Field17] AS Amount
          ,[Field18] AS [Description]
          ,[Field19] AS Employer
          ,[Field20] AS Occupation
          ,[Field21] AS AttorneyJob
          ,[Field22] AS SpouseEmployer
          ,[Field23] As ChildParentEmployer1
          ,[Field24] AS ChildParentEmployer2
          ,[Field25] AS InKindTravel
          ,[Field26] AS TravellerLastName
          ,[Field27] AS TravellerFirstMiddleNames
          ,[Field28] AS TravellerTitle
          ,[Field29] AS TravellerSuffix
          ,[Field30] AS TravelMode
          ,[Field31] As DptCity
          ,[Field32] AS DptDate
          ,[Field33] AS ArvCity
          ,[Field34] AS ArvDate
          ,[Field35] AS TravelPurpose
          ,[Field36] AS TravelRecordBackReference
      FROM ImportedNativeRecords
      WHERE ImportedReportID IS NOT NULL
      AND ReportType IN ('RCPT','PLDG')
     ORDER BY ImportedRecordID  -- this should work but gives syntax error!
    );

END

View Replies !

---

Using OPTION Clause Within CREATE FUNCTION Statement For Inline Table Functions
Hi!
 
I need to expand resursion level for resursive CTE expression within CREATE FUNCTION statement for inline table function to a value greater than default. It turns out that OPTION clause for MAXRECURSION hint perfectly works if I use it outside CREATE FUNCTION (as well as CREATE VIEW for non-parametrized queries), but  it does not within CREATE FUNCTION statement - I'm getting error:

Msg 156, Level 15, State 1, Procedure ExpandedCTE, Line 34

Incorrect syntax near the keyword 'option'.
 
Here is the function:
 

create FUNCTION [dbo].[ExpandedCTE]

(

@p_id int

)

RETURNS TABLE

AS

RETURN

(

with tbl_cte (id, tbl_id, lvl)

as

(

select


id, tbl_id, 0 lvl

from


tbl

where


id = @p_id

union all

select


t.id, t.tbl_id, lvl + 1
from

tbl_cte
inner join tbl t


on rnr.tbl_id = tbl_cte.id

)

select


id, tbl_id, lvl

from


tbl_cte

option (maxrecursion 0)

)

 
Please help!  
 
Alexander.

 
P.S.
I'm really sorry if it is about syntax, but I could not find it in the documentation.

View Replies !

---

CTE Error: Incorrect Syntax Near The Keyword 'with'. If This Statement Is A Common Table Expression Or An Xmlnamespaces Clause,
I am having this error when using execute query for CTE

Help will be appriciated

View Replies !

---

Where Clause In Sql Query
Hi everyone,   I am trying to run this query and it is not returning a single row. Although I can see one row with this 10/14/2005 date in the table.SELECT  iSourceId, UserId,FROM    tblEmployeeWHERE dtInsertDate >= '10/14/2005' and dtInsertDate <='10/14/2005'I also tried to rewrite the query this waySELECT  iSourceId, UserId,FROM    tblEmployeeWHERE dtInsertDate = '10/14/2005' but still it is not returning a single row.Please let me know what am I doing wrong.Thanks.

View Replies !

---

TOP Clause Query ?
Hi all,

In Oracle 'ROWNUM' can be used with any variables.

eg : select sno from test1 where rownum < variable1 ( say variable1 is a local variable )

Is there any equivalent for the above in SQL Server ?

Hint :

If 'select sno from test where rownum < 10' in Oracle, then SQL Server equivalent is 'select top 9 sno from test'.

The same way I need the equivalent for the above.

Thanks,
Sam

View Replies !

---

Like Clause In SQL Query
Hi folks,

How can I get all names that start with "sci" or "eng" without using the OR clause. In other words, how can I modify the following statement so I don't use the OR clause:
select * from course where (name like 'sci%' or name like 'eng%')

Can I use regular expressions to achieve that?

Thanks!
-Parul

View Replies !

---

LIKE Clause In Query
Question..

In a MSSQL SELECT Statement e.g

SELECT t1.fname, t1.lname, t2.district_name, t2.district_number FROM t1 AS table1, t2 AS table2 WHERE t2.district_name LIKE 'S%'

i have these values in the table

table1

fname lname
mike jackson
roy mires

table2

district_name district_number
South 123
Daggerty 7845
duffel 7224
rubble 7545

Now the query is dynamic (the letter is that the like clause is run against)

When the letter D is searched for i get the 2 colums duffel, daggerty BUT when S is searched against I get nothing..

I am confused as to why, It doesn't seem to be case sensitive, as the 2 colums duffel and Daggerty 1 is d is in lowercase and the other is in uppercase. andive tries both lowercase s and uppercase S and still got nothing.

Is tehre a better way to use the LIKE clause? Ive looked and looked for documentation about the LIKE clause but I cannot find anything

Am i doing something wrong?

any help would be greatly appreciated

View Replies !

---

Using Having Clause Or Views For SQL Query
Does anyone know how to count rows of data from 1 table that meet one or two different criteria and then get the probability of occurance for that criteria ... as an output column?
Do I use 'Having' or temp tables or Views?
Here is my output for now.  I am trying to solve for 'Prob' - everything else works on it's own.Craig
 
SELECT Wins_Lng/Trades_Lng as Prob
FROM Transactions
SELECT Count(Ticker) as Trades_Lng
FROM Transactions
WHERE TransType='C' AND DateDiff(day,BaseDate,GetDate())<=100 AND TransKind='B' (SELECT COUNT(Ticker)as Wins_Lng
FROM TransactionsWHERE Transkind='B' AND TransType='C' AND DateDiff(day,BaseDate,GetDate())<=100 AND Profit_Lng>=0)
 
 
 
 
 

View Replies !

---

Group By Clause Query Help
This is my queryselect ano,max(date),a_subject from MY_TAB where table_name='xyz' andano=877group by a_subject,ano order by a_subjectANOmax(Date)A_Subject8772005-01-20 00:00:00.000Subject_18771900-01-01 00:00:00.000Subject_28772004-12-20 00:00:00.000Subject_38772005-01-19 00:00:00.000Subject_4--------------------------------------------------------------------------When I put the status column in, it fetches all the rows.select ano,max(date),a_subject,status from MY_TAB wheretable_name='xyz' and ano=877 group by a_subject,ano,status order bya_subjectANOmax(Date)A_SubjectStatus8772005-01-20 00:00:00.000Subject_1Not Started8771900-01-01 00:00:00.000Subject_2Not Started8772004-12-20 00:00:00.000Subject_3Completed8771900-01-01 00:00:00.000Subject_3Not Started8771900-01-01 00:00:00.000Subject_4Not Started8772005-01-19 00:00:00.000Subject_4Not Started-----------------------------------------------------------------------now what i want isANOmax(Date)A_SubjectStatus8772005-01-20 00:00:00.000Subject_1Not Started8771900-01-01 00:00:00.000Subject_2Not Started8772004-12-20 00:00:00.000Subject_3Completed8772005-01-19 00:00:00.000Subject_4Not StartedThanks a lot for your help.AJ

View Replies !

---

ODBC Query ... Getting Where Clause
OK ... I am using UPS Worldship that issues an ODBC query to my MS2Kserver ... Worldship can query either a table or a view and retreiveshipping info for a supplied orderid.I need to create a DB table that will track the orderids requestedfrom Worldship so that I can stop doubleships. That is to set up afunction to allow the info to be sent only once to worldship.I need to execute a stored procedure to write to a table and enforcebiz logic.So .. I've created a view that Worldship can execute an ODBC queryagainst (v_upsPull) ... in which I guess the query issued will belike: SELECT * FROM v_upsPull WHERE orderid = 123456The view is:CREATE VIEW dbo.v_upsPullASSELECT * FROM OPENROWSET ( 'SQLOLEDB', '[db]'; '[user]'; '[password]','exec sp_ups_pull')When the ODBC query calls the view the sp_ups_pull store procedurer isexecuted.However ... I do not have access to the original Where clause in theODBC query in the stored procedurer.Is there a way I can get access to the ODBC Where clause and pass itinto the stored procedurer?If not is there some other way I can create a DB table and run aselect against it ... based on the Worldship query?

View Replies !

---

SQL Query Help-- Order By Clause
HiI want a simple select query on a column-name (smalldatetime) withvalues dislayed in desc order with null values FIRST.i.e.Select orderdate from ordersorder by ( null values first and then orderdate in desc order)could any one please helpThanks

View Replies !

---

Using DTS Parameterized Query &#39;IN&#39; Where Clause
I want to export an SQL Server table to an Excel Spreadsheet driven by a web interface.
I am using Cold Fusion to call a SQL Server Stored procedure. The SP accepts a variable (IDlist) from the web page and sets this to a Global Variable.

EXEC @hr = sp_OASetProperty @oPKG, 'GlobalVariables("outIDlist").Value', @outIDlist

The SP then executes a DTS package to export to Excel. The DTS package uses the Global variable in the SQL Query thus:

SELECT ...
FROM ...
WHERE tblPropertyRegister.IDProperty IN (?);

This works fine when I pass one single ID (@outIDlist = "20") into the stored procedure.
But it returns no records when I pass multiple IDs (@outIDlist = "19, 20, 21") into the stored procedure. It works fine also if I "hard code" the IDlist into the DTS query (eg WHERE tblPropertyRegister.IDProperty IN (19, 20, 21);).
The problem appears to be in the setting of the global variable in the stored procedure.

Has anyone had any experience with this? Any feed back would be greatly appreciated. TIA

Alan

View Replies !

---

Using IN Clause To Query Two Databases
Hello,

I've put together the following query, but it has been unsuccessful running it so far.


Code:

select * from Contractors.dbo.Contacts
where VendorNo in (select No_ from [BMIS Live Database].dbo.[BMIS Live Database$Vendor]
where [Name] like '%of%')



I receive the following error when I run it in Query Analyzer:


Code:

Server: Msg 446, Level 16, State 9, Line 1
Cannot resolve collation conflict for equal to operation.



I'm trying to grab values from the column, "No_" in the Bmis.. database then only select data from the Contractors database if the VendorNo column holds one of the values grabbed from the Bmis.. database. I think my syntax is just completely wrong but hopefully someone might pick up on my mistakes. Any help would be greatly appreciated, thanks!

Alex

View Replies !

---

Query Cannot Be Updated Because The FROM Clause
Hi everybody,

 

I have a problem. My provider(ISP) is supporting SQL Native Client driver and my forum supplier is only supporting SQLOLEDB. I am trying to access our sql2005 DB located at our ISP. 

 
I have changed this line:
strCon = "Provider=SQLOLEDB;Connection Timeout=90;" & strCon
To:
strCon = "Driver={SQL Native Client};Connection Timeout=90;" & strCon
 
Now I can access the database, but when I am trying to loging I get this error:
Server Error in Forum Application
An error has occured while writing to the database.
Please contact the forum administrator.

Support Error Code:- err_SQLServer_loginUser()_update_USR_Code
File Name:- functions_login.asp

Error details:-
Microsoft OLE DB Provider for ODBC Drivers
Query cannot be updated because the FROM clause is not a single simple table name.

 

What can I do?? I am stuck in between and need a solution.....

 Regards Gerry!


 

View Replies !

---