Query To Sum The Same Field Twice In The Select Statement
Hello friends , I have table (MoneyTrans) with following structure
[Id] [bigint] NOT NULL,
[TransDate] [smalldatetime] NOT NULL,
[TransName] [varchar](30) NOT NULL, -- CAN have values 'Deposit' / 'WithDraw'
[Amount] [money] NOT NULL
I need to write a query to generate following output
Trans Date, total deposits, total withdrawls, closing balance
i.e. Trans Date, sum(amount) for TransName='Deposit' and Date=TransDate , sum(amount) for TransName=Withdraw and Date=TransDate , Closing balance (Sum of deposit - sum of withdraw for date < = TransDate )
I am working on this for past two days with out getting a right solution. Any help is appreciated
Sara
View Complete Forum Thread with Replies
Related Forum Messages:
Convert A Time Field In The Select Statement Of The Query
Hi, I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query. Can anyone help me please? Thx
View Replies !
TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement
Hi guys, I have the query below (running okay): Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' FROM myTables WHERE Conditions are true ORDER BY Field01 The results are just as I need: Field01 Field02 ------------- ---------------------- 192473 8461760 192474 22810 Because other reasons. I need to modify that query to: Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' INTO AuxiliaryTable FROM myTables WHERE Conditions are true ORDER BY Field01 SELECT DISTINCT [Field02] FROM AuxTable The the results are: Field02 ---------------------- 22810 8461760 And what I need is (without showing any other field): Field02 ---------------------- 8461760 22810 Is there any good suggestion? Thanks in advance for any help, Aldo.
View Replies !
Select Statement Within Select Statement Makes My Query Slow....
Hello... im having a problem with my query optimization.... I have a query that looks like this: SELECT * FROM table1 WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998) it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View Replies !
The Select Statement Is In A Field
Ok, I inherited this database and there is a field that stopres a selectstatement. Is there anyway possible to execute the value of the fieldwithin a select statement?For example:the table:Name "george"lookupForName "Select orders from Ordertable"So maybe something like select name, execute(lookupforname) as ordersSorry, I didn't design this, just inherited :)george
View Replies !
Select Statement With A New Identity Field
Hello, Is it possible to generate a identityfield dynamically upon select, like this: SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC I want the output to be: 1 - Name12 - Name23 - Name3 The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes. Like: SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC I want the output to be: 1 - Name32 - Name23 - Name1 Patrick
View Replies !
Select Statement Eliminate Field Name
Hi I have tabelA, Which has 10 columns, I need to select 10 column values only no field names. Is there any way I can select only table values not field names. I don't want to see field name in my query result set. Please let me know. I appreciate your help. Thanks Regards -Leong
View Replies !
How Do I Call A Select Statement Properly When The Field Is A Yes/no?
Hello, i am pretty new to asp. I am trying to do a select statement for sending an email to everyone who is not an admin. the code is below, i know it must be fairly simple, yet i do not know how to do it. With the code below, I select everyone. I want to know how to do it properly, similar to the second which does not work. Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers", conn) DOES NOT WORK: Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers WHERE Admin = 'N'", conn) Thanks in advance.
View Replies !
SELECT Statement - How To Not Get Column Field Names?
I do a SELECT * from table command in an ASP page to build a text fileout on our server, but the export is not to allow a field name rows ofrecords. The first thing I get is a row with all the field names. Whydo these come in if they are not part of the table records? How do Ieliminate this from being produced? Here's the ASP code....<html><head><title>Package Tracking Results - Client Feed</title></head><body><%' define variablesdim oConn ' ADO Connectiondim oRSc ' ADO Recordset - Courier tabledim cSQLstr ' SQL string - Courier tabledim oRSn ' ADO Recordset - NAN tabledim nSQLstr ' SQL string - NAN tabledim objFSO ' FSO Connectiondim objTextFile ' Text File' set and define FSO connection and text file object locationSet objFSO = CreateObject("Scripting.FileSystemObject")'Set objTextFile =objFSO.CreateTextFile(Server.MapPath("textfile.txt"))'Response.Write (Server.MapPath("textfile.txt") & "<br />")Set objTextFile = objFSO.OpenTextFile("C: extfile.txt",2)' write text to text file'objTextFile.WriteLine "This text is in the file ""textfile.txt""!"' SQL strings for Courier and NAN tablescSQLstr = "SELECT * FROM Courier"' set and open ADO connection & oRSc recordsetsset oConn=Server.CreateObject("ADODB.connection")oConn.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &"c:/Database/QaTracking/QaTracking.mdb" & ";"set oRSc=Server.CreateObject("ADODB.Recordset")oRSc.Open cSQLstr, oConnResponse.ContentType = "text/plain"Dim i, j, tmpIf Not oRSc.EOF ThenFor i = 1 To oRSc.Fields.CountobjTextFile.Write oRSc.Fields(i-1).NameIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineWhile Not oRSc.EOFFor i = 1 To oRSc.Fields.CountIf oRSc.Fields(i-1) <"" Thentmp = oRSc.Fields(i-1)' If TypeName(tmp) = "String" Then' objTextFile.Write "" &_'Replace(oRSc.Fields(i-1),vbCrLf,"") & ""' ElseobjTextFile.Write oRSc.Fields(i-1)' End IfEnd IfIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineoRSc.MoveNextWendEnd IfobjTextFile.CloseSet objTextFile = NothingSet objFSO = NothingoRSc.CloseSet oRSc = NothingoConn.CloseSet oConn = Nothing%></body></html>
View Replies !
Select Statement With Run Time Field Selection
I have this SELECT statement. SELECT [issueID], [name] FROM [MyIssue] What I wanted to do is in addition to the above statement, I want to add two run time fields like this: 99 [issueID],'All Issues' [name] So let's say the above select statements generates this list: Summer 2007 Issue Winter 2007 Issue The two addition fields will make the result list like this: 01 Summer 2007 Issue 02 Winter 2007 Issue 99 All Issues How do I accomplish this? Any help is much appreciated.
View Replies !
Need To Set A Field In A Select Statement Equal To Yes Or No If Record Exists In Separate Table
Hey gang, I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query') I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling. Here's my current Query this works fine: Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#') What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note. I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No) Any advice would be greatly appreciated.
View Replies !
In Code Behind, What Is Proper Select Statement Syntax To Retrieve The @BName Field From A Table?
In Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName) I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER " error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'. Source Error: Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
View Replies !
DISTINCT SELECT Query With More Than One Field
Hello, I want to do a DISTINCT SELECT query with more than one field, for example a ID field with a Type field, as if both fields make the primary key, like (ID 1 ,Type 1) ,( ID 1, Type 2) and (ID 2, Type 1) is ok but not (ID 1, Type1) and (ID 1,Type 1) if its not possible to do a distinct with more than one then what other techniques are possible to get the duplicate data out. the reason why I want to use distinct is that I can use that query to export that data to where both of these fields make the primary key. Thanks in advance
View Replies !
Query/select The First 10 Characters In A Field
I'm comparing two tables and need to compare the first 8 characters of one field in table A to the first 8 characters in another field in table B. So instead of where 'John Smith' = 'John Smith' it would compare where 'John Smi' = 'John Smi' I know I've done this before but can't find a good reference. It's something like this when calling a query within a WHILE loop: SELECT * FROM blah WHERE FID = '".$row['FID']."' AND LEFT('TRACK', 8) = LEFT('".$row['TRACK']."',8) Am I close? Any help would be appreciated.
View Replies !
Select Statement Query
In my select statement, I return a column for 'datediff' using a CASEquery. I call this column 'Elapsed_days'is there anyway I can use this result later on in the same select? IEI want to refer to 'elasped days' in another CASE query rather thanhave to re-write something which incorporates the original one.Simpler the better - I'm new!Make any sense?Hope so
View Replies !
Select Statement Query
Hi, I have a table called notes, with thousands of rows of "notes" entered by customer services agents. Each row has an account number, date and username columns. An account can have many notes on thetable. How can I select the last two notes on the table left for each account? Trying to use select top 2, but of course it's only giving me the top 2 notes for ALL accounts. Please help. Thanks very much.
View Replies !
Help With A Query- Select A Top Field And Join It With Another Table
hi, i need help with a query:SELECT Headshot, UserName, HeadshotId FROM tblProfile INNER JOIN Headshots ON Headshots.ProfileId=tblProfile.ProfileId WHERE (UserName= @UserName) this query will select what I want from the database, but the problem is that I have multiple HeadshotIds for each profile, and I only want to select the TOP/highest HeadshotId and get one row foreach headshotId. Is there a way to do that in 1 SQL query? I know how to do it with multiple queries, but im using SqlDataSource and it only permits one. Thanks!
View Replies !
How To Format A Date Field In Select Query
Is it possible to format the date field create_date (mm/dd/yyyy or mm/dd/yy) I use the following query in stored proc. will be called in the asp.net page for population the datagrid. select id, name, create_date from actionstable; Please help, Thank you.
View Replies !
Can Anyone Tell Me How To Use 'Case' Statement In Select Query In SQL ?
I need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement??? is this correct ?? its showing me errors Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ??? (case when 'DataSource =1' then 'ABC' then 'BCD' endcase) Where ..... Pls correct me Thanks
View Replies !
Logic Statement Using Select Query
I'd like to make a logic statement, that would take as arguments result of the sql select query. In more details: I would like to create a local Bool variable that would be false if some value is NULL in the table (or select query).Query example:select taskID from Users where Login=@usernameWhich classes/methods should i use to solve this problem? I use SqlDataSource to get access to database and i think i should use something like SqlDataSource.UpdateCommand and SqlDataSource.UpdateParameters but dont know how to build from this a logic statement.Thanks in advance
View Replies !
Select Statement Help:How Do I Query Two Tables
How do I Query two tables and minus the result to be displayed in a gridview. I will appreciate all the help that I can get in this regard. Find below my two select statement 1st Select StatementDim SelectString As String = "SELECT DISTINCT [Course_Code], [Course_Description], [Credit_Hr], [Course_Type], [Course_Method] FROM [MSISCourses] WHERE (([Course_Type] = Core) OR ([Course_Type] = Information Integration Project) "If radBtnView.Checked = True ThenSelectString = SelectString & " OR ([Course_Type] = 'Knowledge')"End IfIf chkGView.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Data Management')"End IfIf chkGView2.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'General')"End IfIf chkGView1.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Electronic Commerce')"End IfIf chkGView3.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Network Administration and Security')"End IfIf chkGView4.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Healthcare Information Systems')"End IfSqlDataSource3.SelectCommand = SelectString 2nd Select Statement"SELECT DISTINCT [Co_Code], [Co_Description], [Cr_Hr], [Co_Type], [Co_Method] FROM [StudentCourses] WHERE ([Co_Code] = StdIDLabel)" my gridview<asp:GridView ID="GridView2" runat="server" AutoGenerateColumns="False" DataKeyNames="Course_Code" DataSourceID="SqlDataSource3" GridLines="Horizontal"><Columns><asp:BoundField DataField="Course_Code" HeaderText="Course_Code" ReadOnly="True" SortExpression="Course_Code" /> <asp:BoundField DataField="Course_Description" HeaderText="Course_Description" SortExpression="Course_Description" /> <asp:BoundField DataField="Credit_Hr" HeaderText="Credit_Hr" SortExpression="Credit_Hr" /> <asp:BoundField DataField="Course_Type" HeaderText="Course_Type" SortExpression="Course_Type" /> <asp:BoundField DataField="Course_Method" HeaderText="Course_Method" SortExpression="Course_Method" /> </Columns></asp:GridView>
View Replies !
How To Use Select Statement In Insert Query
hi my self avii want to copy data from one table to other table,by giving certaincondition and i want o use insert statement .in this i want to pass somevalue directly and some value from select statement , if i try i ll geterror i.e all column of destination table (i.e in which i want to insertdata) should match with all columns in values column some thing likethis.plz give me some helpful suggetion on this
View Replies !
How Do I Use Select Statement In Update Query
hi myself avii am developing one appliacaion in which i am using vb 6 as front end,adodb as database library and sql sever 7 as backend.i want to update one table for which i required data from other table. andiretrive data from second table by giving some condition. when i get data,then to update first table i need to use do while loop. instead of that iwant to use select statement directly in update query.plz give me some help.following is the my queries and its out putStrSql = ""StrSql = "Select * From SalesVchMaterialDesc where TransactionID=" &txtTransactionID.text & ""rsMName.Open StrSql, Conn, adOpenKeysetDo While Not rsMName.EOFStrSql = ""StrSql = "Update StockTable Set Outward=Outward - " &rsMName("Netweight") & ",OutwardQty=OutwardQty - " & rsMName("Qty") & "Where MaterialId=" & rsMName("Material_Name") & " and VoucherDate='" &Format(rsMName("VoucherDate"), "mm/dd/yyyy") & "'RsAdd.Open StrSql, Conn, adOpenStaticrsMName.MoveNextLooprsMName.Closeout put***main querySelect * From SalesVchMaterialDesc where TransactionID=848do while not loopUpdate StockTable Set Outward=Outward - 8.06,OutwardQty=OutwardQty - 1Where MaterialId=221 and VoucherDate='04/01/2004' and SMID=0loop
View Replies !
Using A CASE Statement Within A Select Query
Hi folks, Hope you are all well. I am using a CASE statement within a SELECT query to sum up values for different customers. SELECT CR_CUST.Customer_Code, 'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END, 'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END, 'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END FROM CR_CUST INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code WHERE (CR_PROD.Part_Class_Code = 1 OR CR_PROD.Part_Class_Code = 7 OR CR_PROD.Part_Class_Code = 8) GROUP BY CR_CUST.Customer_Code, CR_PROD.Part_Class_Code The above query produces the following results... Customer_Code General_01 General_07 General_08 ------------- ---------------- ---------------- ---------------- 02210 10074.30 .00 .00 02347 7606.49 .00 .00 02210 .00 12618.42 .00 02347 .00 13131.63 .00 02210 .00 .00 4505.44 02347 .00 .00 5018.03 My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so... Customer_Code General_01 General_07 General_08 ------------- ---------------- ---------------- ---------------- 02210 10074.30 12618.42 4505.44 02347 7606.49 13131.63 5018.03 I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table. SELECT Customer_Code, SUM(General_01), SUM(General_07), SUM(General_08) FROM #MyTempTable GROUP BY Customer_Code Thanks in advance, Kev
View Replies !
Can't Query More Than 15 Fields In A Select Statement
An ADODB error spawn everytime I query more than 15 fields in a specific SQL Table. My sql statement is something like this: set rs=server.createobject("ADODB.Recordset") rs.open "select * from mytbl",application("mycon"),1,3 And the error is something like this: "you can't query more than the maximum field "
View Replies !
Select Statement Subcribed To Query Notification
I have noticed something strange on the select statement that you can use on query notification. I have a table that contains a compute column let's call it "Calculate". If I subscribe to query notification: Select ID from table the subscription fails. The column Calculate doesn't use the column ID. Why?? for me it shouldn't be the case Thankx MArina B.
View Replies !
SQL Query (SELECT Statement) And Table Design
I am wondering if there is a direct query in this case: I am developing a program to a company which simply sells services One service may have different prices for different types of clients The price of any service for any client can change at any time, and I should be able to trace these changes at any time I made the following tables (simplified): (asterisk for primary key) (Table) (Fields) CLIENT_TYPES : ID*, ClientTypeName SERVICES : ID*, ServiceName PRICES : ServiceID*, ClientTypeID*, Price, Date* ORDERS : ID*, Date, ClientTypeID ORDER_SERVICES : OrderID*, ServiceID* The field in bold is the area of the question This is a sample data in the PRICES table: ServiceID ClientTypeID Price Date1 1 100 1/1/20072 1 150 1/1/20071 2 90 1/1/20072 2 135 1/1/2007 Now if I want to update a price of service 1 for clienttype 1, I add the following row: 1 1 100 1/1/2008 So one product for one client can have any number of prices with different dates The following query: SELECT * FROM PRICES WHERE ClientTypeID = 1 will retrieve all prices with repeats for a specific client (#1 here) What I want is a query to retrieve the most recent prices for specific client for all products, even if a query on query If there is commemts on table design please tell me thanks for any one who provides help
View Replies !
Multiple Tables Used In Select Statement Makes My Update Statement Not Work?
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View Replies !
Using Conditional Statement In Stored Prcodure To Build Select Statement
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View Replies !
How To Write Select Statement Inside CASE Statement ?
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ? following part of the procedure clears my requirement. SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E can any one help me in this? please give me a sample query. Thanks and Regards, Kiran Suthar
View Replies !
Help With Delete Statement/converting This Select Statement.
I have 3 tables, with this relation: tblChats.WebsiteID = tblWebsite.ID tblWebsite.AccountID = tblAccount.ID I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement: SELECT * FROM tblChats c LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View Replies !
Select Statement Problem - Group By Maybe Nested Select?
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View Replies !
WHERE Field=(select Field From Tables)??????
I need some help.I am trying to write a query which does the followingSELECT * from table1 where field1=(SELECT distinct field1 FROM table1WHERE field2='2005' or field2='2010')I need all the values from table1 which match any value from field 1from the subquery.Any help is appreciated.thanks
View Replies !
SQL Select Statement To Select The Last Ten Records Posted
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
View Replies !
Using Select Statement Result In If Statement Please Help
Hello How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement. <% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>" ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)"> <SelectParameters> <asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" /> </SelectParameters> </asp:SqlDataSource>any help would be appreciated
View Replies !
If STATEMENT Within Select Statement Syntax
Hi, I am a newbie to this site and hope someone can help.... I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is: if(TL_flag= '1', "yes") as [Trial Leave] it is coming up with an error.... I can use Select case but I should not need to as this should work? Any ideas?
View Replies !
Return The Results Of A Select Query In A Column Of Another Select Query.
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs. I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID. I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages. When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID). Any thoughts as to how I could accomplish such a daring feat?
View Replies !
Field Names From SQL Statement
Is there anyway to determine what the resulting Field Names are going to be from a SQL Statement? For example: SELECT TABLE1.FIELD1, TABLE1.FIELD2, TABLE1.FIELD3, TABLE2.FIELD1 AS ANOTHERNAME FROM TABLE1 INNER JOIN TABLE2 ON TABLE1.PK = TABLE2.FK resulting field names: FIELD1 FIELD2 FIELD3 ANOTHERNAME Seems easy enough splitting all values before "FROM" by comma and doing some manipulation to remove table names and anything before the word "AS". However, it gets more difficult when you have complex CASE statements embedded in you query that may also contain commas. Just a shot in the dark because I don't know if anyone has already done something like this before. Thank you in advance, Jeff
View Replies !
Select Query Based Upon Results Of Another Select Query??
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return. This is implemented as a stored procedure declare @OwnerIdent varchar(7) set @OwnerIdent='A12345B' SELECT table1.val1 FROM table1 INNER JOIN table2 ON table1. Ident = table2.Ident WHERE table2.Ident = @OwnerIdent 'Now for each result of the above I need to run the below query SELECT Clients.Name , Clients.Address1 , Clients.BPhone, Clients.email FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey WHERE Growers.PIN = @newpin) '@newpin being the result from first query Any help appreciated
View Replies !
Include ID Field In GROUP BY Statement
I've got a query where i need to return a max value based on a select but one of the fields i need to return in the results is the records primary key ID No. This messes up the MAX bit and means that all results are returned, not just the max one. The query i'm using is very long so i've simplified what i mean by the example below. Say i have a table 'Fruits': ID FruitName Cost1 Apple 0.452 Apple 0.633 Apple 0.524 Pear 0.895 Pear 0.83 And run the query: select max(Cost),FruitName From Fruitsgroup by FruitName It'll correctly return: FruitName CostApple 0.63Pear 0.89 Now i need the ID also returned by my query so i go: select max(Cost),FruitName,ID From Fruitsgroup by FruitName,ID This doesnt return the above results with the ID appended to it, it instead returns: ID FruitName Cost1 Apple 0.452 Apple 0.633 Apple 0.524 Pear 0.895 Pear 0.83 As the ID is always distinct and therefore messes up the grouping. How in this instance would i return the correct result of: ID FruitName Cost2 Apple 0.634 Pear 0.89 Thanks.
View Replies !
Checkbox - Using In Update Statement As Bit Field
hi I have a bit field in sql server represented by a checkbox ... I am updating the database in code ( ie not using formview generated update .. ) the line that is falling over is .Parameters.Add("@archive", SqlDbType.Bit).Value = txtarchive.Checkedit falls over saying failed to convert string parameter to boolean the value of txtarchive.checked is either true or false - how do i convert this to 1 or 0 or something that sql is happy with ... thanks
View Replies !
SQL Insert Statement That Returns The ID Field
I'm fairly new to SQL, so this might be simple question: I am adding records to an SQL7 database by using the INSERT statement. The table has an IDENTITY field which is auto-incremented, so a value is not needed for the field in the query. Is there any parameters for INSERT that returns to me the value of the IDENTITY field for the record I just created?... Any help or suggestions would be appreciated.
View Replies !
EXECUTING A SQL STATEMENT AGAINST DATA FIELD
HELLO I'M NEW OF SQL SERVER. I'VE BEEN CHARGED BY MY COMPANY TO MOVE THE MDB WHICH WE WORKED TILL NOW TO SQL. OBVIOUSLY I HAVE NOW TO CREATE THE DATABASE'S UPGRADING PROCEDURES WE WERE USING ON ACCESS. MY PURPOSE IS TO MAKE RUN THE FOLLOWIG PROCEDURE, ONLY IF THE VALUE OF THE FIELD 'UPTGRD11' IS EQUAL AT '1', BELOW THE SQL STATEMENT I'M USING. THIS OPTION IN ACCESS IS VERY EASY, BY MACRO OR BY VBA, I'M NOT ABEL TO DO IT IN T-SQL IT DOESN'T RUN LIKE THAT IF 'dbo.uptgrdt.uptgrd11' = '1' BUT IT RUNS USING IS NOT NULL IF 'dbo.uptgrdt.uptgrd11' IS NOT NULL is there an easy way to do what i'm trying to?
View Replies !
|
TRACKER
