MS SQL Server :: Remote Connection Tests Fine, But Nothing Works On The Page Itself.

Telnet Connection Works, Sql Cmd Connection Works, SQL Server Managment Studio 2005 Does Not
I'm having a strange problem with this but I know (and admit) that the problem is on my PC and nowhere else. My firewall was causing a problem because I was unable to PING the database server, switching this off gets a successful PING immediately. The most useful utility to date is running netstat -an in the command window. This illustrates all the connections that are live and ports that are being listed to. I can establish a connection both by running

telnet sql5.hostinguk.net 1433 and

sqlcmd -S sql5.hostinguk.net -U username -P password

See below:

Active Connections

Proto Local Address Foreign Address State

TCP 0.0.0.0:25 0.0.0.0:0 LISTENING

TCP 0.0.0.0:80 0.0.0.0:0 LISTENING

TCP 0.0.0.0:135 0.0.0.0:0 LISTENING

TCP 0.0.0.0:443 0.0.0.0:0 LISTENING

TCP 0.0.0.0:445 0.0.0.0:0 LISTENING

TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING

TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING

TCP 81.105.102.47:1134 217.194.210.169:1433 ESTABLISHED

TCP 81.105.102.47:1135 217.194.210.169:1433 ESTABLISHED

TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING

TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51114 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51201 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51202 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51203 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51204 0.0.0.0:0 LISTENING

TCP 127.0.0.1:51206 0.0.0.0:0 LISTENING

UDP 0.0.0.0:445 *:*

UDP 0.0.0.0:500 *:*

UDP 0.0.0.0:1025 *:*

UDP 0.0.0.0:1030 *:*

UDP 0.0.0.0:3456 *:*

UDP 0.0.0.0:4500 *:*

UDP 81.105.102.47:123 *:*

UDP 81.105.102.47:1900 *:*

UDP 81.105.102.47:5353 *:*

UDP 127.0.0.1:123 *:*

UDP 127.0.0.1:1086 *:*

UDP 127.0.0.1:1900 *:*

Both these utilities show as establishing a connection in netstat so I am able to connect the database server every time, this worked throughout yesterday and has continued this morning.

The problem is when I attempt to use SQL Server Management Studio. When I attempt to connect to tcp:sql5.hostinguk.net, 1433 nothing shows in netstat at all. There is an option to encrypt the connection in the connection properties tab in management studio, when I enable this I do get an entry in netstat -an, see below:

TCP 81.105.102.47:1138 217.194.210.169:1433 TIME_WAIT

TCP 81.105.102.47:1139 217.194.210.169:1433 TIME_WAIT

TCP 81.105.102.47:1140 217.194.210.169:1433 TIME_WAIT

Amost as if it's trying the different ports but you get this time_wait thing. The error message is more meaningful and hopefull because I get:

A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (.Net SqlClient Data Provider)

I would expect this as the DNS has not been advised to encrypt the conection.

This is much better than the : Login failed for user 'COX10289'. (.Net SqlClient Data Provider) that I get, irrespective of whether I enter a password or not.

This is on a XP machine trying to connect to the remote webhosting company via the internet.

I can ping the server

I have enabled shared memory and tcp/ip in protocols, named pipes and via are disabled

I do not have any aliases set up

No I do not force encryption

I wonder if you have any further suggestions to this problem?

View Replies !

Sql Job Fails But When Run Outside Works Fine
Hi..

I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error

Error: 2008-03-24 13:52:40.22
   Code: 0xC0202009
   Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.

Provider is unable to function until these components are installed.".

I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.

Any help would really be appreciated..

View Replies !

Transfer Problems For 6.5 Next Week Works Fine
I have set up transfer of database which takes 6 hrs each saturday
Type--- CMDeXEC

last saturday it tooks just 7 mins and showed this error and did not coplete

2004/0619 4:00:18:42-spid14-Warning OPEN OBJECTS parameter too low

2004/0619 4:00:18:45-spit14-attempt was made to free up descriptors in localdes()

2004/0619 4:00:18:45-spid14-Run sp_configure to increase parameter value

2004/0619 4:00:19:95-spid14-Warning OPEN OBJECTS parameter too low

2004/0619 4:00:19:95-spit14-attempt was made to free up descriptors in localdes()

2004/0619 4:00:19:95-spid14-Run sp_configure to increase parameter value

OriginalTransfered
Data Size 19000(max 28105 mb)18640(max 18640)
Log Size 4000(13105 mb)4640 (max 4640)
Data Physical 18.5 gb18.5 gb
logPhysical 3.90 g b4.88 gb

looks like my data and log size should be increased correct

if yes how to do that?????

if worked this week fine (6 hrs )

View Replies !

32 Bit DTExec Fails While 64 Bit Works Fine On 64 Bit Machine
Hi,
I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.

Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started: 9:24:30 AM
Error: 2008-03-18 09:24:32.54
   Code: 0xC0202009
   Source: IMALCRM Connection manager "IMAL SRC"
   Description: An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC020801C
   Source: Load Fund Detail V_FUND_DETAIL [16]
   Description: The AcquireConnection method call to the connection manager "IMA
L SRC" failed with error code 0xC0202009.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC0047017
   Source: Load Fund Detail DTS.Pipeline
   Description: component "V_FUND_DETAIL" (16) failed validation and returned er
ror code 0xC020801C.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC004700C
   Source: Load Fund Detail DTS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC0024107
   Source: Load Fund Detail
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:24:30 AM
Finished: 9:24:32 AM
Elapsed: 2.078 seconds

View Replies !

Job Doesn't Work But Package Works Fine
hi,

I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.

Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.

Any ideas?

View Replies !

DTS Job Failing Execution When Scheduled, Works Fine Manually.
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:

DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.

Help!!!

View Replies !

Query Works Fine Outside Union, But Doesn't Work .. .
hi all

I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.

any one know why that might be the case??

select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc

i've included the union query here for completeness of the question

begin
declare @current_date datetime
set @current_date = GETDATE()

select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc

end

View Replies !

Using Symmetric Key Problem With Encryption, Decryption Works Fine
Hey I had a table with a column of data encrypted in a format. I was able to decrypt it and then encrypt it using Symmetric keys and then updating the table column with the data. Now, there is a user sp which needs to encrypt the password for the new user and put it in the table. I'm not being able to make it work. I have this so far. Something somewhere is wrong. I dont know where. Please help Thanks. I used the same script to do the encryption initially but that was for the whole column. I need to see the encrypted version of the @inTargetPassword variable. But it's not working. It doesn't give me an error but gives me wrong data...

declare @thePassword as varbinary(128)

,@inTargetPassword as varchar(255)

,@pwd3 as varchar(255)

,@theUserId bigint

set @theUserId= 124564

set @inTargetPassword = 'test'

OPEN SYMMETRIC KEY Key1

DECRYPTION BY CERTIFICATE sqlSecurity;

Select @pwd3=EncryptByKey(Key_GUID('Key1')

, @inTargetPassword, 1, HashBytes('SHA1', CONVERT( varbinary, [UserObjectId])))

from table1 where UserObjectId= @theUserId

close symmetric key Key1

View Replies !

Slow Query....drop Index Works Fine!!!!!
We are running MS RS and SQL Server 2000 SP3.

We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.

Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).

If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.

This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....

What is this. ....is it our QUERY, index or huge Transactions or no free space ???

We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?

Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????

Thanks,

View Replies !

Report Works Fine Stand Alone, But Fails When Used As Subreport
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.

The error that I'm getting is this:

[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.

[rsNone] An error has occurred during report processing.

Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!

View Replies !

Multivalue Works Fine In The Sproc But Not In Bids Or Reportserver
Hi,

I have a report which has multivalue parameters enabled and If i give NULL it displays everything correctly. But if I give different ClientId it doesnt do it in the report.. But if i run my sproc in VS2005 and in ssms it works the way i want it. this is my sproc

Code Snippet
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]

@StartDate datetime,
@EndDate datetime,
@ClientId nvarchar(max)= NULL
AS
Declare @SQLTEXT nvarchar(max)
if @ClientId is NULL
BEGIN
SELECT
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId -- and o.CreatedByUserId = cp.UserId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC
END
ELSE
BEGIN
SELECT @SQLTEXT = 'Select
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' )
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
cp.ClientId in (' + convert(Varchar,@ClientId) + ')
AND
o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + '''
ORDER BY
o.OrderId DESC'
exec(@SQLTEXT)
END
--return (@SQLTEXT)

I have 2 datasets in this report one for the above sproc and other dataset that gives me the clientname and it is as follows

Code Snippet

ALTER Procedure [dbo].[usp_GetClientsAll]

@ClientId nvarchar(max) = NULL

AS

--Declare @ClientId nvarchar(max)

SELECT

NULL ClientId,

'<All Clients >' ClientName

FROM

Client

Union

SELECT

ClientId,

ClientName

FROM

Client

Where

ClientId = @ClientId

OR

(

ClientId = ClientId

OR

@ClientId IS NULL

)

In the first dataset Parameter list i have omitted ClientId but kept it in the report parameter.. So when i give select all it works.. but when i just select particular it gives me the same result as Select all..

any help will be appreciated..
REgards
Karen

View Replies !

Problems Publishing My Personal Website - Works Fine Locally!
People,I'm trying to publish my first website and am having a few problems.I've got Visual Web Developer 2005 Express and am trying to use the Personal Website Starter Kit. (my SQL server is SQL Server Express Edition 2005 - which is also running on my local machine)It seems to work fine when I run it on my localhost, as soon as I ftp it up to my web hosting company, I get an error message (see below) :-An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) My hypothesis is :-It would appear to me that when running locally, the starter kit website uses my installation of SQL 2005 Express Edition, but when I upload all the files, I'm guessing the application is still trying to point at a local instance of SQL on my local PC which it now cannot see. I'm guessing I need to somehow upload the SQL database onto my web host (I've purchased 100M of SQL Server 2005 space), and point the application at that SQL instance instead. But I don't know if I'm right about all this, or indeed how to do it if I am. Can anyone help?Much thanks in advance,Will

View Replies !

Long Running Query In SQL 2005 But Works Fine In SQL 2000
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.

I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.

/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null

Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.

I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.

One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.

Stacy

View Replies !

Stored Procedure Works Fine, But Doesnt Preview? (Beginner)
I modified this stored procedure with the code highlighted, and now it runs forever on reporting services. Can anyone tell me what might be causing this? Here's my code. When i run it in Management studio and the dataset in reporting services, it works fine. But when it comes to previewing it, it runs forever.

USE [RC_STAT]

GO

/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN] Script Date: 06/29/2007 11:34:36 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN]

(@Region int = Null)

AS

BEGIN

SELECT

[Item_Ledger_Posting_Datetime] Post_Date

,'SMP' Budget_Type

,'Invoice' as Document_Type

,[Item_Ledger_Document_No] Document_Number

,[Item_Description]+' '+'('+[Item_No]+')' Entry_Description

,ISNULL(RC_STAT.dbo.udf_Correct_Price(Item_No, Item_Ledger_Posting_Datetime, 'SALESAMP') * -1*Item_Ledger_Invoiced_Qty,Item_Ledger_Cost_Posted_GL * -1 ) Amount

,-1*[Item_Ledger_Invoiced_Qty] Quantity

,Customer_Name

,'' External_Doc_no

,[Item_Ledger_Sales_Responsible] SR_Code

,[Item_Ledger_Mars_Period_Code] ThePeriod

,[Item_Ledger_Mars_Year] TheYear

,Territory.Name AS Territory_Name

,Region.Region AS Region_Name

,Budget_Reporting.Budget_Reporting_Group_ID

,Budget_Reporting_Group.Budget_Reporting_Group_Description

FROM [NavisionReplication].[dbo].[Qry_Item_Ledger_Detail]

INNER JOIN NavisionReplication.dbo.Tbl_Salesperson_Purchaser AS Salesperson_Purchaser

ON [Item_Ledger_Sales_Responsible] = Salesperson_Purchaser.SalesPerson_Purchaser_Code

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Territory AS Territory

ON Territory.Code = Salesperson_Purchaser.Territory_Code

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting As Budget_Reporting

ON Budget_Reporting.Salesperson_Purchaser_Code = Salesperson_Purchaser.Salesperson_Purchaser_Code

LEFT OUTER JOIN RC_DWDB_INSTANCE_1.dbo.Region AS Region

ON Territory.Region_Key = Region.Region_Key

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Group As Budget_Reporting_Group

ON Budget_Reporting_Group.Budget_reporting_Group_ID = Budget_Reporting.Budget_Reporting_Group_ID

WHERE Region.Region_Key = @Region

AND [Item_Ledger_Mars_Year] = 2007

AND [Item_Ledger_Amount]= 0

UNION ALL

SELECT

[GL_Entry_Posting_DateTime]

,Budget_Reporting.[Budget_Type_Code]

,[Document_Type]

,[GL_Entry_Document_No]

,[GL_Entry_Description]

,[GL_Entry_Amount]

,0 Quantity

,[User_ID]

,[GL_Entry_External_Document_No]

,[Sales_Responsible]

,[Mars_Period_Code]

,[Mars_Year]

,Territory.Name AS Territory_Name

,Region.Region AS Region_Name

,Budget_Reporting.Budget_Reporting_Group_ID

,Budget_Reporting_Group.Budget_Reporting_Group_Description

FROM [NavisionReplication].[dbo].[Tbl_GL_entry] GL_entry

INNER JOIN [RC_DWDB_INSTANCE_1].[dbo].[Tbl_Budget_Accounts] Budget_Accounts

ON Budget_Accounts.[GL_Account_No] = GL_entry.[GL_Account]

INNER JOIN NavisionReplication.dbo.Tbl_Salesperson_Purchaser AS Salesperson_Purchaser

ON GL_entry.[Sales_Responsible] = Salesperson_Purchaser.SalesPerson_Purchaser_Code

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Territory AS Territory

ON Territory.Code = Salesperson_Purchaser.Territory_Code

LEFT OUTER JOIN RC_DWDB_INSTANCE_1.dbo.Region AS Region

ON Territory.Region_Key = Region.Region_Key

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting As Budget_Reporting

ON Budget_Reporting.Salesperson_Purchaser_Code = Salesperson_Purchaser.Salesperson_Purchaser_Code

INNER JOIN RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Group As Budget_Reporting_Group

ON Budget_Reporting_Group.Budget_reporting_Group_ID = Budget_Reporting.Budget_Reporting_Group_ID

WHERE GL_entry.[Mars_Year] = 2007

END

View Replies !

Works Fine In Designer But When I Load The Report It Doesn't Work
works fine in designer but when i load the report services
I get the following error
anybody know what to do
there is one subreport with this report
maybe the passing value but what could be wrong ????

Item has already been added. Key in dictionary: '9' Key being added: '9'

View Replies !

Permission Issue With Tempdb Works Fine In SQL2000 But Not SQL2005
the following SQL works fine in SQL2000 but gets a permissions error when run on SQL2005:

IF not exists (SELECT * FROM tempdb.dbo.sysindexes WHERE NAME = 'PK_tblGuidContractMove')

BEGIN

IF @DEBUG = 1 PRINT 'airsp_CopyContracts.PK_tblGuidContractMove'

EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidSource GUID NOT NULL')

EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidDestination GUID NOT NULL')

EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidContractMove GUID NOT NULL')
EXECUTE('ALTER TABLE #tblGuidContractMove WITH NOCHECK ADD

CONSTRAINT [PK_tblGuidContractMove] PRIMARY KEY CLUSTERED

(

[guidSource],

[guidDestination],

[guidContractMove]

) ON [PRIMARY]')

END

The user permissions are set the same in both 2000 and 2005 can you please explain what changed and what are the minimum permissions need for the user to be able to make these changes to the temporary table which the user created.

View Replies !

Havin Trouble Inserting Records To A Table.. Update Works Fine
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
Any help will be appreciated..
Regards,
Karen

View Replies !

Works Fine Inside BI Dev. Studio, But Fails When Scheduling It In SQL Server 2005.
Hi!

View Replies !

SQL 2000 Partitioned View Works Fine, But CURSOR With FOR UPDATE Fails To Declare
This one has me stumped.

I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.

There error generated is:

Server: Msg 16957, Level 16, State 4, Line 3

FOR UPDATE cannot be specified on a READ ONLY cursor

Here is the cursor declaration:

declare some_cursor CURSOR

for

select *

from part_view

FOR UPDATE

Any ideas, guys? Thanks in advance for knocking your head against this one.

PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.

View Replies !

Table Visibility Not Functioning Correctly On Server, Works Fine In Visual Studio
I have a report problem. I'm using a parameter to dynamically control visibility for two tables. If the parameter is set to one value, I want to switch one of the tables to invisible, if the parameter is set to another, I want the other table to be invisible instead.

This all works fine in Visual Studio. When I publish it to my report server, the visibility controls no longer function and both tables always display. Any ideas here?

I'm running 2005, SP2 CTP.

View Replies !

Xp_sendmail: Failed With Mail Error 0x80040111 It Works Fine When You Do A Test From Enterprise Manager

Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:

EXEC master.dbo.xp_sendmail @RECIPIENTS = araz***@***.com(removed email address),
@SUBJECT = 'test'

I receive:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80040111

I have stopped/restarted the SQL SERVER AGENT but haven't done much else as I haven't been able to.

Should it work through transact SQL if the test email works from Enterprise Manager?

This is SQL 2000 SP4 running on Win2K in the domain. Thank you.

View Replies !

RESTORE FILELIST Is Terminating Abnormally Error When Running A DTS Package In SQL 2005. Works Fine In SQL 2000
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):

Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.

Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.

BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).

(5 row(s) affected)

Msg 213, Level 16, State 7, Line 1

Insert Error: Column name or number of supplied values does not match table definition.

Msg 3013, Level 16, State 1, Line 1

RESTORE FILELIST is terminating abnormally.

The code I am using is:

-- the original database (use 'SET @DB = NULL' to disable backup)

DECLARE @DB varchar(200)

SET @DB = 'Marketing'

-- the backup filename

DECLARE @BackupFile varchar(2000)

SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'

-- the new database name

DECLARE @TestDB2 varchar(200)

SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'

-- the new database files without .mdf/.ldf

DECLARE @RestoreFile varchar(2000)

SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2

DECLARE @RestoreLog varchar (2000)

SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2

-- ****************************************************************

-- no change below this line

-- ****************************************************************

DECLARE @query varchar(2000)

DECLARE @DataFile varchar(2000)

SET @DataFile = @RestoreFile + '.mdf'

DECLARE @LogFile varchar(2000)

SET @LogFile = @RestoreLog + '.ldf'

IF @DB IS NOT NULL

BEGIN

SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')

EXEC (@query)

END

-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'

-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'

-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'

-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'

IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)

BEGIN

SET @query = 'DROP DATABASE ' + @TestDB2

EXEC (@query)

END

RESTORE HEADERONLY FROM DISK = @BackupFile

DECLARE @File int

SET @File = @@ROWCOUNT

DECLARE @Data varchar(500)

DECLARE @Log varchar(500)

SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')

CREATE TABLE #restoretemp

(

LogicalName varchar(500),

PhysicalName varchar(500),

type varchar(10),

FilegroupName varchar(200),

size int,

maxsize bigint

)

INSERT #restoretemp EXEC (@query)

SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'

SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'

PRINT @Data

PRINT @Log

TRUNCATE TABLE #restoretemp

DROP TABLE #restoretemp

IF @File > 0

BEGIN

SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +

' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +

QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)

EXEC (@query)

END

View Replies !

OR Works Fine, When I Add AND Things Go Wrong (was &"Help With Simple Query&")
Hi I really need some help I have been banging my head against a brick wall for the last day or so...

I need some assistance with a query. Maybe what I am trying to do is not possible but I am sure it is.

I have a ASP page with a SQL 2005 Express backend. I would like to query a table based on a dropdownlist and checkboxes on my form.

The perameter in the drop down list is a service so I am querying records based on a service. The checkboxes are locations such as north,east, south and west. So I am building OR statements with these. For example I am looking for plumbers in the north and east. The OR part works fine. Its when I add the service into the query things go wrong.

Here is my tables

Company
---------

PK CompanyID
ComapnyName

Service
--------

PK ServiceID
FK CompanyID
ServiceName

Region
--------

PK RegionID
FK CompanyID
North
East
South
West

The below works fine when querying companies in different locations:

SELECT TblCompany.CompanyID, TblCompany.CompanyName, TblRegion.North, TblRegion.East, TblRegion.South, TblRegion.West
FROM TblCompany INNER JOIN
TblRegion ON TblCompany.CompanyID = TblRegion.CompanyID
WHERE (TblRegion.Scotland = @Pram1) OR
(TblRegion.Wales = @Pram2) OR
(TblRegion.NorthEast = @Pram3) OR
(TblRegion.NorthWest = @Pram4)

Now the problem is when I add in the service table. Sometimes I get all records returned. So even if I query a plumber in the south and east I get records for companies that dont even have a particular service in the perameter.

I can provide more info if need - I am guessing my design is all wrong. The way I see this happening from a GUI is a dropdown being the service WHERE perameter and the truefalse BIT tick boxes being the OR perameters - any help would be great - many thanks in advance.

View Replies !

Sql Report Works Fine On Internal Servers - Hosed On External Servers - Need Some Help
I have a report that was designed using SQL Reporting Services that sits on a SQL reporting server. It's nothing too exciting, it is essentially a three page application with legal jumbo on pages 2 and 3 and applicant data in fields on page 1.

We use rectangles to force page breaks to page 2 and to page 3.

When running the report on the report server, it shows and prints fine.

When running the report from the QA website internally, it shows and prints just fine.

When running the report from the production website from a machine internally, it shows and prints just fine.

When running the report from outside of the company network, the report is jacked. It obliterates large chunks of text, crams text together, and creates blank pages.

I need help in determining where I even begin with trouble shooting this!

View Replies !

MS Access Back-end Works Fine, But SQL Server Back End NOT Working For Access Project
Hi

I have 2 forms, each associated with its own table - they are linked together only by the fact that they share a common field, CustomerID....

I create a form (for table 1, called Customers) that brings up another form (for table 2, called Projects) based on the CustomerId that is selected in the first form from the Customers table - with a SQL back end it brings up ALL records in the second form (for the second table) with any CustomerIDs that exist in both tables - I set the link criteria [forms]![Customers]![CustomerID] and with an MS access back-end it works fine, but with a SQL back end it still returns ALL records with any ID that matches....not just the one I selected in the Customers form..... why??

thanks for reading this and for your help...

View Replies !

Can't Connect To Remote Server, My App Works In Local Only???
Hello,
i've developed a website using VB.NET, and SQL SERVER 2K, in my dev environment works properly (SQL Server and WEB SERVER are in the same machine).
When i put everything in the target machine, where the webserver is but not the sql, i get the following error:
Sql SErver does not exist or access denied

I've tried so many ways to do this, ODBC, ADO.NET, OLEDB.....and everything ends in the same error.
Also if i try to connect with ODBC (from odbc manager) it seems to work (test connection succesfull), but in asp.net nothing works.
I've tried to access the server with:
INSTANCE_NAME
SERVER_NAMEINSTANCE_NAME
IP,PORT

I think (they are checking this), that the auth mode is set to MIXED MODE.

Any idea to save my life?? ;)

Thanks ppl

View Replies !

Linked Server Works Local Not Remote
I'm stumped on this so any help is appreciated....

DB1 - Contains views 4 part named to connect through a linked server to DB2 (this is queried by an application via ODBC)

DB2 - Contains tables and views that DB1's views pull from and run queries against via ODBC connect with DSN defined. (DB2 is read only no data is written to DB2)

In one instance DB1 and DB2 are on the same instance of SQL Server 2000 Sp3. The queries from the application work fine - everything is still 4 part named to use the linked server(OLE DB for ODBC Drivers) and DSN.

In another instance DB1 and DB2 are on different servers. Some queries via the application work fine however others that have multiple joins in them fail with the following error:

Database error: [Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB error trace [OLE/DB Provider 'MSDASQL' |CommandText::Execute returned 0x80040e14].. Contact your ....(Error: WIS 10901) (Error:INF)

I have tried every variation of linked server and with or without ODBC and DSN and the only thing in common the matrix is that it will fail when the DB2 linked server definition is pointing to a different instance on a different server.

Any help is appreciated.

Thanks,
James

View Replies !

Linked Server: Works Local, But Not Remote
I have created a linked server (to an AS/400) via MSDASQL. It works fine when I execute queries locally (i.e. from Management Studio running on the SQL 2005 server).

However, when I execute a query from a remote machine I get an error (see below for the exact message).

I know the ODBC connection is between the SQL server and the AS/400, and that the remote client does not have connectivity to the AS/400. But shouldn't the SQL server be able to pass the query through to the linked server even if the query is initiated from a remote machine?

Does anyone have any suggestions on how I can resolve this problem so that queries against the linked server can be executed from remote machines?

Errors:

OLE DB provider "MSDASQL" for linked server "MERCURY" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".

OLE DB provider "MSDASQL" for linked server "MERCURY" returned message "[IBM][iSeries Access ODBC Driver]Key value in connection string too long.".

Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MERCURY".

Environment: SQL 2005, Standard Edition SP2

Thanks in advance for any suggestions.

David Rueter
drueter@assyst.com

View Replies !

SQL Query That Works In SQL Server Management Studio, But Doesn't On .NET 2.0 Page
SELECT favorites.FID, favorites.filename, favorites.username, files.status, files.private, files.views, files.title FROM favorites INNER JOIN files ON favorites.filename = files.filename WHERE (favorites.username = @username) AND (files.status IS NULL) AND (files.private = @private)@private is manually set to 'no'@username is set to profile.usernamewhen I run the above query in microsoft sql server mgmt studio express on the database, it presents all the information i'm asking for very easily. however when i try to implement this query on a aspx .net2.0 page with teh sqldatasource and a gridview, no data is displayed.anyone know what my problem is?

View Replies !

Data Fields In Page Header - An Answer That Works ALL The Time (Not Resolved)
Hi

I need data fields in the page header. The report is multiple pages. I have multiple fields I need in the page header. These fields will change on each page.

I've tried everything I can find suggested on this forum. They all either don't work or work for a while. Then, as is the case today, we get a problem with a report that renders perfectly in the RS browser but when it's output to a PDF, a couple of the page headers become confused.

Why can't Microsoft provide a hack that actually works somewhere (Maybe I just can't find it)? A sticky at the top of the forum?

I'm currently using the answer supplied by NB at AeM here http://forums.microsoft.com/msdn/showpost.aspx?postid=638813&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=1 As I said it works very nicely, thanks , except for when it doesn't export properly to a PDF which is an MS issue I presume not the solutions issue.

I really need to be able to make this work before I start throwing my toys from my pram and so my boss doesn't think I'm a complete idiot. I'm sure he doesn't believe me when I say I can't put data in a report header, after all it's only the most basic of reporting functions.

Can anyone please help with a 100% solution?

Cheers

View Replies !

Access To Remote Server For Developers Works ,but They Can't Create Folder Or Add New Package To Msdb
Hi ,

on test server I added developers domain group and DBA group to dcom using article

http://sqljunkies.com/WebLog/knight_reign/archive/2006/01/05/17769.aspx

and made developers domain group dbo of msdb on test server

developers can connect to remote test server ,see SSIS ,browse between folders

but

when they trying to create new folder in msdb they get error saying

... folder already exist

when they trying to import new SSIS to msdb they get get error saying

...access to package denied

Remote access (import/export ,new folders creation) fully work only for DBA group

View Replies !

SQL Remote Connection Not Being Seen, Though Remote Connections Allowed
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks

View Replies !

FTP Connection Only Works In BIDS
I have an FTP task that will only work when running in BIDS.

When trying to run as a package on the server or calling the package from a job, I get the following error in the log file:

OnError,<servername>,<user>,FTP Task,{B2F5BB68-C6F8-4EE5-ABC0-71C3636E3E4A},{B7B41A88-18DD-4AD7-8CDE-9E0C1B74DA02},6/26/2007 12:09:11 PM,6/26/2007 12:09:11 PM,-1073573489,0x,Unable to connect to FTP server using "FTP Connection Manager".

When running in BIDS it is fine.

Any know what is causing this?

View Replies !

CLI Connection To SQL Works, C++ Doesn't
I'm trying to connect to my SQL, and both ways I tried with CLI work. However, I have no luck with native C++, with the same string. Any ideas why? Here's the error message I get, and the source.

IM008
[Microsoft][ODBC Driver Manager] Dialog failed

Code Snippet

#include<iostream>
#include<windows.h>
#include<sql.h>
#include <sqlext.h>
using namespace std;
#using <mscorlib.dll>
#using <System.dll>
#using <System.Data.dll>
using namespace System::Data;

void main()
{
    System::Data::SqlClient::SqlConnection^ cSql=gcnew System::Data::SqlClient::SqlConnection("Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ");
    cSql->Open();
    cSql->Close();
    System::Data::OleDb::OleDbConnection^ cOledb=gcnew System::Data::OleDb::OleDbConnection("Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ;PROVIDER=SQLOLEDB");
    cOledb->Open();
    cOledb->Close();

    SQLRETURN iRet;
    SQLHANDLE EnvHndl;
    SQLHANDLE ConnHndl;
    iRet = SQLAllocHandle(1, 0, &EnvHndl);
    iRet = SQLSetEnvAttr(EnvHndl, 200, (SQLPOINTER)3, 0);
    iRet = SQLAllocHandle(2,EnvHndl, &ConnHndl);

    wchar_t ConnStr[255];
    wcscpy(ConnStr,L"Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ;PROVIDER=SQLOLEDB");
    short ConnStrLength=wcslen(ConnStr);
    iRet = SQLDriverConnect(ConnHndl, 0, (wchar_t*)ConnStr, ConnStrLength, (wchar_t*)ConnStr, 255, &ConnStrLength, 1);

    long NativeError;
    wchar_t*Msg=new wchar_t[10000];
    wchar_t*SqlState=new wchar_t[10000];
    int iParDiag=1;
    short MsgLen=10000;
    iRet = SQLGetDiagRec(2, ConnHndl, iParDiag, SqlState, &NativeError, Msg, 512, &MsgLen);
    wcout<<ConnStr<<L'';
    wcout<<SqlState<<L'';
    wcout<<Msg<<L'';
}

View Replies !

Connection Problems - Works In WinForms, Not In ASP.NET
Hi,

I am trying to connect to a remote SQL Server 2000 database using ASP.NET. This is my connection string

"Server=LOL-DEV;Database=Livelink;User ID=sa;Password=xxx;Trusted_Connection=False"

With this I get 'access denied or sql server doesn't exist'. If I use exactly the same code in a WinForms app, the connection works OK.

Does anyone have any idea why this might be?

Cheers

James

View Replies !

Trusted SQL Server Connection -- Works Under C#, But Not C++
Hi All,

I have a web serivce written in C++ and I'm trying to connect to a database. I'm using the same connection string that works from an aspx page written in C#. but when I copy it over to the C++ environment, I get:

System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.

Note the username shows up as null in the error... My C++ looks like:

using namespace System:ata:qlClient;

String^ cs2 = "server=192.168.1.47;database=MyDB;integrated security=true;uid=myuser;pwd=mypassword";

SqlConnection^ myConnection = gcnew SqlConnection(cs2);

myConnection->Open();

Again, this works in C#. Interestingly, a sniffer shows a difference in an NT Authentication Packet as it's sent from my development machine to the database across the network. For the C# call, the NT Authentication packet has a username of "myuser" - from the connection string. It then gets acknowledged from the database. For the C++ call though, the username is sent as "ASPNET" - seemingly ignoring the username in the connection string. It's also rejected by the database in the next packet with the message above.

Any idea what's up with this? -- Curt

View Replies !

SSIS Project Failing To Run Even Though I Verified Remote Sybase Connection Via Connection Manager

When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:

TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------

Any ideas???

View Replies !

HTTP Connection From Iis Fails But Works From Excel
Hi,

I can use Http connection to Analysis Services 2005 from Excel but when I try to use IIS it fails.
AS and IIS are on different machines and not in the same domain.

In the event log of the server with AS i can see following event:

Event Type: Information
Event Source: MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll
Event Category: (269)
Event ID: 10
Date:  5/20/2008
Time:  10:17:02 AM
User:  N/A
Computer: *******
Description:
The description for Event ID ( 10 ) in Source ( MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .

I assume it's permission issue. Excel and IIS must be using different user to connect to AS. I tried with different authentication methods on the iis but without success.

How can I make IIS connect with proper permissions?

Dariusz

View Replies !

Remote Connection Refused When Creating ODBC Connection To SQL Server 2005
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.

How can I allow the server to allow this.

Any help appreciated

regards

View Replies !

Query Works In 'test Query' But Refuses To Show Up In The Datagrid On A Web Page - Urgent!
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC

Here is the page source

<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
	FROM dbo.MAKES INNER JOIN
				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
	ORDER BY count(*) DESC
">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!

(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)

View Replies !

Accessing Data Connection Works Locally, But Not When Deployed
Hi all, I hope this is a simple issue that I'm overlooking something or have contradicting permissions set somewhere. I have a fairly basic site with a subfolder containing an aspx page. The user logs in to gain access to the subfolder. That part works fine.On another page(also within a subfolder in the subfolder), they can post form data to a database (SQL Server 2000) which exists on a different server than my web server. This page opens fine, but when submitting the data (only one value to one field for my testing purposes), it bombs and returns the error "Login failed for user"...In my connection string I've specified the username and password which I assigned to the db in Enterprise Manager (not sa, btw). I've also tried letting IIS control the UID/PW, and even specified no UID/PW in either the connection string or the db. Anonymous access enabled in IIS for this virtual directory also returns the error. (?)I should mention that in Visual Studio, the connection string was automatically set to my local development machine's workstation ID. I removed that and have tried replacing it with the server name, blank, etc.(in notepad) - to no avail. dll's are in their proper places, etc. The only thing not working is the database connection.Using: IIS v6, SQL Server 2000, and Visual Studio.NET 2003 (1.1 framework)Anyway - any suggestions? There are so many places to enable/disable permissions, it's getting confusing. I hope it's something I'm overlooking and not a problem with our SQL installation...Thanks!--Donnie

View Replies !

SSIS Remote Connection Failing ... Local Connection OK
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.

I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.

Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.

Am I missing something obvious ?

View Replies !

Connection Issue With Enterprise Manager But Works With Management Studio
Hi,I have an interesting scenario. I have a SQL Server 2000 Standard Edition instance running on Computer A. I'm trying to access it through computers B and C.Computer B has Sql Server 2005 Express Edition installed and I was able to use its Management Studio and connect to instance on Computer A.Computer C has SQL Server 2000 Standard Edition installed. When I try to connect to the instance on Computer A, I get connection failed message.I checked some settings. Both TCP/IP and Named pipes are enabled on the instance in A. The TCP/IP port is set to 1433 for both client and server.Please give me some ideas as to how I can solve this problem. -Thanks

View Replies !

Bcp Cannot Connect Via Local Connection, But Can Using Remote Connection?
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.

Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.

SQL Server Management Studio Express connects happily, and I set up a single data import table.

Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-

bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c

Fails with the error-

Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].

As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.

While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:

bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress

both work ok.

Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?

I have found threads that look similar to my issue-

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1

However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.

Any hints on how to proceed much appreciated.

Regards: Colin E.

View Replies !