MS SQL Server :: SqlDataSource.SelectParameters Causing Procedure Or Function Stored Procedure Has Too Many Arguments Specified.

Procedure Or Function Sp_AddDealer Has Too Many Arguments Specified (error Via SqlDataSource)
Procedure or function sp_AddDealer has too many arguments specified.
I am experiencing the 'too many arguments specified' error. I am running on SQL 2005. The Parameters lists on SQL server (when I view a dropdown under the sp name) shows a 'returns integer' (but without the @ the signifies a parameter).I have looked around the forums and haven't seen quite this flavor of this error. My forehead is sore from beating it against the wall... any clue would be appreciated!
The error occurs when I click the 'new' link button, enter some data and then click the update link button after ... BOOM - Procedure or function sp_AddDealer has too many arguments specified.
Thanks!!
Chip Kigar
Here is the stored Procedure:

set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgo
ALTER PROCEDURE [dbo].[sp_AddDealer] @sCarcareSystem varchar(100), @sDealerName varchar(50), @sDealerPhysAddrStreet varchar(200), @sDealerPhysAddrCity varchar(100), @sDealerPhysAddrState varchar(10), @sDealerPhysAddrZip varchar(20), @nReturnCode bigint output, @nReturnId bigint output AS
SET NOCOUNT ON  DECLARE @m_nCt bigint  SET @nReturnCode = 0 SET @nReturnId = 0
-- VALIDATE IF (@nReturnCode = 0) BEGIN  SELECT   @m_nCt = COUNT(tblDealers.[_DealerId])   FROM    tblDealers    WHERE   [Dealer Name] = @sDealerName   IF (@m_nCt >0)  BEGIN   SET @nReturnCode = -2000 --'Error for exsiting Dealer'   SET @nReturnId = 0  END END
-- PROCESS IF (@nReturnCode = 0) BEGIN  SET @nReturnCode = -2 --' Error getting new record id'  DECLARE @m_nNewRecId bigint  SET @m_nNewRecId = 0  EXEC sp_GetNewRecId @m_nNewRecId output  IF (@m_nNewRecId > 0)  BEGIN   SET @nReturnCode = -1 --'Error adding Dealer'   INSERT INTO     tblDealers    (    [_DealerId],    [Carcare System],    [Dealer Name],    [Dealer Phys Addr Street],    [Dealer Phys Addr City],    [Dealer Phys Addr State],    [Dealer Phys Addr Zip]    )    VALUES    (    @m_nNewRecId,    @sCarcareSystem,    @sDealerName,    @sDealerPhysAddrStreet,    @sDealerPhysAddrCity,    @sDealerPhysAddrState,    @sDealerPhysAddrZip    )    SET @nReturnCode = 0 --'Success'   SET @nReturnId = @m_nNewRecId
   END  END

Here is the SQLDataSource. I plugged the ID parameter, so I got a schema back, but no data.

    <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"        InsertCommand="sp_AddDealer" InsertCommandType="StoredProcedure"         SelectCommand="sp_GetDealerByDealerId"   SelectCommandType="StoredProcedure">        <SelectParameters>            <asp:Parameter DefaultValue="2" Name="nDealerId" Type="Int64" />            <asp:Parameter DefaultValue="" Direction="Output" Name="nReturnCode" Type="Int64" />            <asp:Parameter Direction="Output" Name="nReturnId" Type="Int64" />        </SelectParameters>        <InsertParameters>            <asp:Parameter Name="sCarcareSystem" Type="String" />            <asp:Parameter Name="sDealerName" Type="String" />            <asp:Parameter Name="sDealerPhysAddrStreet" Type="String" />            <asp:Parameter Name="sDealerPhysAddrCity" Type="String" />            <asp:Parameter Name="sDealerPhysAddrState" Type="String" />            <asp:Parameter Name="sDealerPhysAddrZip" Type="String" />            <asp:Parameter Direction="InputOutput" Name="nReturnCode" Type="Int64" />            <asp:Parameter Direction="InputOutput" Name="nReturnId" Type="Int64" />        </InsertParameters>    </asp:SqlDataSource>
Here is the Formview:

    <asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1">        <EditItemTemplate>            _DealerId:            <asp:TextBox ID="_DealerIdTextBox" runat="server" Text='<%# Bind("_DealerId") %>'>            </asp:TextBox><br />            Carcare System:            <asp:TextBox ID="Carcare_SystemTextBox" runat="server" Text='<%# Bind("[Carcare System]") %>'>            </asp:TextBox><br />            Dealer Name:            <asp:TextBox ID="Dealer_NameTextBox" runat="server" Text='<%# Bind("[Dealer Name]") %>'>            </asp:TextBox><br />            Address Street:            <asp:TextBox ID="Address_StreetTextBox" runat="server" Text='<%# Bind("[Address Street]") %>'>            </asp:TextBox><br />            Address City:            <asp:TextBox ID="Address_CityTextBox" runat="server" Text='<%# Bind("[Address City]") %>'>            </asp:TextBox><br />            Address State:            <asp:TextBox ID="Address_StateTextBox" runat="server" Text='<%# Bind("[Address State]") %>'>            </asp:TextBox><br />            Address Zip:            <asp:TextBox ID="Address_ZipTextBox" runat="server" Text='<%# Bind("[Address Zip]") %>'>            </asp:TextBox><br />            <asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True" CommandName="Update"                Text="Update">            </asp:LinkButton>            <asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"                Text="Cancel">            </asp:LinkButton>        </EditItemTemplate>        <InsertItemTemplate>            _DealerId:            <asp:TextBox ID="_DealerIdTextBox" runat="server" Text='<%# Bind("_DealerId") %>'>            </asp:TextBox><br />            Carcare System:            <asp:TextBox ID="Carcare_SystemTextBox" runat="server" Text='<%# Bind("[Carcare System]") %>'>            </asp:TextBox><br />            Dealer Name:            <asp:TextBox ID="Dealer_NameTextBox" runat="server" Text='<%# Bind("[Dealer Name]") %>'>            </asp:TextBox><br />            Address Street:            <asp:TextBox ID="Address_StreetTextBox" runat="server" Text='<%# Bind("[Address Street]") %>'>            </asp:TextBox><br />            Address City:            <asp:TextBox ID="Address_CityTextBox" runat="server" Text='<%# Bind("[Address City]") %>'>            </asp:TextBox><br />            Address State:            <asp:TextBox ID="Address_StateTextBox" runat="server" Text='<%# Bind("[Address State]") %>'>            </asp:TextBox><br />            Address Zip:            <asp:TextBox ID="Address_ZipTextBox" runat="server" Text='<%# Bind("[Address Zip]") %>'>            </asp:TextBox><br />            <asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"                Text="Insert">            </asp:LinkButton>            <asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"                Text="Cancel">            </asp:LinkButton>        </InsertItemTemplate>        <ItemTemplate>            _DealerId:            <asp:Label ID="_DealerIdLabel" runat="server" Text='<%# Bind("_DealerId") %>'>            </asp:Label><br />            Carcare System:            <asp:Label ID="Carcare_SystemLabel" runat="server" Text='<%# Bind("[Carcare System]") %>'>            </asp:Label><br />            Dealer Name:            <asp:Label ID="Dealer_NameLabel" runat="server" Text='<%# Bind("[Dealer Name]") %>'>            </asp:Label><br />            Address Street:            <asp:Label ID="Address_StreetLabel" runat="server" Text='<%# Bind("[Address Street]") %>'>            </asp:Label><br />            Address City:            <asp:Label ID="Address_CityLabel" runat="server" Text='<%# Bind("[Address City]") %>'>            </asp:Label><br />            Address State:            <asp:Label ID="Address_StateLabel" runat="server" Text='<%# Bind("[Address State]") %>'>            </asp:Label><br />            Address Zip:            <asp:Label ID="Address_ZipLabel" runat="server" Text='<%# Bind("[Address Zip]") %>'>            </asp:Label><br />            <asp:LinkButton ID="NewButton" runat="server" CausesValidation="False" CommandName="New"                Text="New">            </asp:LinkButton>        </ItemTemplate>    </asp:FormView>

View Replies !

Procedure Or Function Has Too Many Arguments Specified
Hi,I have a simple stored procedure that basically SELECT some data from database. I am calling this stored procedure using a sqldatasource. The first time I try it, it works perfectly fine. But I get the error message "Procedure or function has too many arguments specified" the second time I try to search for thing. This is the code that I have that called the stored procedure: Session("SearchItem") = txtSearch.Text.Trim SqlDataSource1.SelectCommand = "_MyStoredProcedure" SqlDataSource1.SelectParameters.Add("SearchItem", Session("SearchItem")) SqlDataSource1.SelectCommandType = SqlDataSourceCommandType.StoredProcedure Gridview1.DataSourceID = "SqlDataSource1" Gridview1.DataBind() The following is the code in the stored procedure: CREATE PROCEDURE [dbo].[_MyStoredProcedure] ( @SearchItem nvarchar(255) = NULL)ASSELECT Field1, Field2, Field3 FROM Registration WHERE((@SearchItem IS NULL) OR (Field1 LIKE '%' + @SearchItem + '%') OR (Field2 LIKE '%' + @SearchItem + '%'))GO Please help.Stan

View Replies !

Procedure Or Function Has Too Many Arguments Specified
I have a Typed Dataset in an applcation <<Table structure in database is also same as Dataset>>
<xs:element name="WC_CMNT_TXT">     <xs:complexType>      <xs:sequence>       <xs:element name="WC_CMNT_TXT_ID" msdata:ReadOnly="true" msdata:AutoIncrement="true" type="xs:int"        msdata:AutoIncrementSeed="-2" msdata:AutoIncrementStep="-1" />       <xs:element name="WC_RSPRC_ID" type="xs:int" />       <xs:element name="WC_CMNT_TYP_ID" type="xs:int" />       <xs:element name="CMNT_TXT" type="xs:string" minOccurs="0" />       <xs:element name="ENT_TISTMP" msdata:ReadOnly="true" type="xs:dateTime" minOccurs="0" />      </xs:sequence>     </xs:complexType>  </xs:element>
First Column is a Primary key.
CMNT_TXT is fetched using WC_RSPRC_ID and WC_CMNT_TYP_ID and binded to a text box.
if no row is returned then empty row s created in a dataset by
            this.dsCommentText.WC_CMNT_TXT.AddWC_CMNT_TXTRow(132,9,String.Empty,System.DateTime.Now);
Till here it s working fine.
Now when i update the data in a database using data-adapter , i get the error message as "Procedure or function AddWC_CMNT_TXT has too many arguments specified"
Insert Commnad is as below :
   SqlDataAdapter da = new SqlDataAdapter();         da.TableMappings.Add("Table","WC_CMNT_TXT");      #region Insert Command   SqlCommand cmdInsert = new SqlCommand();   cmdInsert.UpdatedRowSource = UpdateRowSource.OutputParameters;   cmdInsert.CommandText = "cas_wrkstn_dbo.AddWC_CMNT_TXT";   cmdInsert.CommandType = System.Data.CommandType.StoredProcedure;    cmdInsert.Parameters.Add(new SqlParameter("@cmnt_txt", SqlDbType.VarChar, 2147483647, ParameterDirection.Input, false, 0, 0, "CMNT_TXT", DataRowVersion.Current, null));   cmdInsert.Parameters.Add(new SqlParameter("@wc_rsprc_id", SqlDbType.Int, 4, ParameterDirection.Input, false, 0, 0, "WC_RSPRC_ID", DataRowVersion.Current, null));   cmdInsert.Parameters.Add(new SqlParameter("@wc_cmnt_typ_id", SqlDbType.Int, 4, ParameterDirection.Input, false, 0, 0, "WC_CMNT_TYT_ID", DataRowVersion.Current, null));      cmdInsert.Parameters.Add(new SqlParameter("@wc_cmnt_txt_id", SqlDbType.Int, 4, ParameterDirection.Output, false, 0, 0, "WC_CMNT_TXT_ID", DataRowVersion.Current, null));   cmdInsert.Parameters.Add(new SqlParameter("@ent_tistmp", SqlDbType.DateTime, 8, ParameterDirection.Output, false, 0, 0, "ENT_TISTMP", DataRowVersion.Original, null));   da.InsertCommand = cmdInsert;

Stored Procedure s :
ALTER procedure AddWC_CMNT_TXT        (        @cmnt_txt    varchar(5000),      @wc_cmnt_typ_id int,      @wc_rsprc_id int,      @wc_cmnt_txt_id int output,        @ent_tistmp    datetime output   )                as        set nocount on;                declare @error int;                insert into WC_CMNT_TXT        (        CMNT_TXT ,       WC_RSPRC_ID,      WC_CMNT_TYP_ID, ENT_TISTMP     )        values        (        @cmnt_txt ,       @wc_rsprc_id ,       @wc_cmnt_typ_id, getdate()      )                if @@rowcount = 1        begin        select           @wc_cmnt_txt_id = WC_CMNT_TXT_ID ,           @ent_tistmp = ENT_TISTMP                   from WC_CMNT_TXT with (nolock)           where (WC_CMNT_TXT_ID = scope_identity())                end                select @error = @@error                return @error

Please suggest wht to do

View Replies !

Procedure Or Function '' Has Too Many Arguments Specified.
Im getting this error when looping through a gridview. Im trying to save each row into the database. The weird thing is that it saves the first row, but errors out on the second.If I only add one item to the gridview, it works. The second row is screwing it up somehow. Any ideas? ------------------------------------------------------------------------------------------------------------------------------------------------------------------Some of my code to get an idea of how im doing it:(This
is for a shopping cart. It displays the products in the shopping cart.
If the order is approved by the CC processing company, each product
entry is saved in the DB. The gridview is being populated by my
ShoppingCart Profile Object.) SqlConnection objConn = new SqlConnection(ConfigurationManager.ConnectionStrings["rdevie"].ConnectionString);
SqlCommand objCmd = new SqlCommand("InsertOrderDetails", objConn);
objCmd.CommandType = CommandType.StoredProcedure;

objConn.Open();

foreach (GridViewRow row in gvOrderDetails.Rows)
{
objCmd.Parameters.Add("@idOrder", SqlDbType.Int).Value = orderNum;
objCmd.Parameters.Add("@fldName", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblName")).Text;
objCmd.Parameters.Add("@fldUnitPrice", SqlDbType.Money).Value = ((Label)row.FindControl("lblUnitPrice")).Text;
objCmd.Parameters.Add("@fldQuantity", SqlDbType.Int).Value = Convert.ToInt32(((Label)row.FindControl("lblQuantity")).Text);
if (!String.IsNullOrEmpty(((Label)row.FindControl("lblSku")).Text))
objCmd.Parameters.Add("@fldSku", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblSku")).Text;
else
objCmd.Parameters.Add("@fldSku", SqlDbType.NVarChar).Value = DBNull.Value;
objCmd.Parameters.Add("@fldSize", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblSize")).Text;
objCmd.Parameters.Add("@fldLogo", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblLogo")).Text;
objCmd.Parameters.Add("@fldPlacement", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblPlacement")).Text;
objCmd.Parameters.Add("@fldColor", SqlDbType.NVarChar).Value = ((Label)row.FindControl("lblColor")).Text;

objCmd.ExecuteNonQuery();
}

objCmd.Dispose();
objConn.Close();
objConn.Dispose();

View Replies !

Procedure Or Function Has Too Many Arguments Specified
I have tried to introduce information in webform with sp and she leaves the following error

View Replies !

Procedure Or Function Has Too Many Arguments Specified
Hello All,
I am having a very strange problem which I cannot figure out. I am using the ASP.NET 2.0 SqlDataSource control to insert a news item into a SQL Express database. When inserting the a message I receive the following error: Procedure or function has too many arguments specified
However according to me every thing adds up. Can anyone please help me figure out what is wrong? Here is the code:
SqlDataSource: <asp:SqlDataSource ID="sqlNews" runat="server" ConnectionString="<%$ ConnectionStrings:FlevoOptiekDB %>" SelectCommandType="StoredProcedure" SelectCommand="dbo.usp_News_ByID" InsertCommandType="StoredProcedure" InsertCommand="dbo.usp_News_Insert" UpdateCommandType="StoredProcedure" UpdateCommand="dbo.usp_News_Update" DeleteCommandType="StoredProcedure" DeleteCommand="dbo.usp_News_Delete" OldValuesParameterFormatString="{0}"> <SelectParameters> <asp:QueryStringParameter Name="p_iNewsID" QueryStringField="news_ID" /> </SelectParameters> <UpdateParameters> <asp:Parameter Name="p_dtmPublished" Type="DateTime" /> <asp:Parameter Name="p_sTitle" /> <asp:Parameter Name="p_sDescription" /> <asp:Parameter Name="p_sStaticUrl" /> <asp:Parameter Name="p_iPhotoID" /> <asp:Parameter Name="p_iNewsID" /> <asp:Parameter Name="p_iAlbumID" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="p_dtmPublished" Type="DateTime" /> <asp:Parameter Name="p_sTitle" /> <asp:Parameter Name="p_sDescription" /> <asp:Parameter Name="p_sStaticUrl" /> <asp:Parameter Name="p_iPhotoID" /> <asp:Parameter Name="p_iAlbumID" /> </InsertParameters> <DeleteParameters> <asp:QueryStringParameter Name="p_iNewsID" QueryStringField="news_ID" /> </DeleteParameters> </asp:SqlDataSource>Stored procedure:ALTER PROCEDURE dbo.usp_News_Insert( @p_sTitle VARCHAR(256), @p_sDescription TEXT, @p_sStaticUrl VARCHAR(256), @p_dtmPublished DATETIME, @p_iPhotoID INT, @p_iAlbumID INT)AS /* SET NOCOUNT ON */ INSERT INTO dbo.tbNews(news_Title, news_Description, news_StaticUrl, news_Published, photo_ID, album_ID) VALUES(@p_sTitle, @p_sDescription, @p_sStaticUrl, @p_dtmPublished, @p_iPhotoID, @p_iAlbumID) RETURN
Thanks, Maurits

View Replies !

Procedure Or Function Has Too Many Arguments Specified
I have two tables: Person (member_no, name) and Participant (participant, member_no) member_no is the primary key in Person.The stored procedure is:CREATE PROCEDURE dbo.InsertRecs@member_no char(10),@name char(10),@participant char(10)ASbegininsert into person (member_no, name)values (@member_no, @name)select @member_no = @@Identityinsert into participant (participant, member_no)values (@participant, @member_no)endGOWhen I run this via the DetailsView control and try to insert a record I always get "Procedure or function InsertRecs has too many arguments specified"If I remove the second table from the stored procedure it works fine.Does anyone have any ideas?

View Replies !

Procedure Or Function Has Too Many Arguments Specified
Hi there
I'm a newbie to ASP.net development.I'm getting this error message "Procedure or function has too many arguments specified." when inserting/editing/deleting data from the formview control.
I executed the stored procedures and had no problems with it but when executed from the web page i encountered the error message mentioned earlier.
Would appreciate it very much if someone can point out what it is that i'm doing wrong.
Thanks in advance.
Customer table:Customer_ID       nchar(10), primary keyFname                  varchar(50)Lname                  varchar(50)Job_ID                  smallint
Stored Procedures:1) InsertCustomersALTER PROCEDURE dbo.InsertCustomers@CustID  nchar(10),@FName  varchar(50),@LName  varchar(50),@JobID  smallintASInsert into Customers (Customer_ID, FName, LName, Job_ID)Values (@CustID, @FName, @LName, @JobID)RETURN
2) UpdateCustomersALTER PROCEDURE dbo.UpdateCustomers@FName  varchar(50),@LName  varchar(50),@JobID  smallint,@CustID  nchar(10)ASUpdate Customers set FName = @FName, LName = @LName, Job_ID = @JobIDWhere Customer_ID = @CustID RETURN
3) DeleteCustomersALTER PROCEDURE dbo.DeleteCustomers@CustID  nchar(10)ASDelete Customers where Customer_ID = @CustID RETURN
Web Page:<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default4.aspx.vb" Inherits="Default4" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server">    <title>Untitled Page</title></head><body>    <form id="form1" runat="server">    <table width="100%">        <tr>            <td colspan="2">                 <asp:FormView ID="FormView1" runat="server" AllowPaging="True"                     DataKeyNames="Customer_ID" DataSourceID="SqlDataSource1" Width="100%">                    <EditItemTemplate>                        Customer_ID:                        <asp:Label ID="Customer_IDLabel1" runat="server" Text='<%# Eval("Customer_ID") %>'>                        </asp:Label><br />                        Fname:                        <asp:TextBox ID="FnameTextBox" runat="server" Text='<%# Bind("Fname") %>'>                        </asp:TextBox><br />                        lname:                        <asp:TextBox ID="lnameTextBox" runat="server" Text='<%# Bind("lname") %>'>                        </asp:TextBox><br />                        job_id:                        <asp:TextBox ID="job_idTextBox" runat="server" Text='<%# Bind("job_id") %>'>                        </asp:TextBox><br />                        <asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True" CommandName="Update"                            Text="Update">                        </asp:LinkButton>                        <asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"                            Text="Cancel">                        </asp:LinkButton>                    </EditItemTemplate>                    <InsertItemTemplate>                        Customer_ID:                        <asp:TextBox ID="Customer_IDTextBox" runat="server" Text='<%# Bind("Customer_ID") %>'>                        </asp:TextBox><br />                        Fname:                        <asp:TextBox ID="FnameTextBox" runat="server" Text='<%# Bind("Fname") %>'>                        </asp:TextBox><br />                        lname:                        <asp:TextBox ID="lnameTextBox" runat="server" Text='<%# Bind("lname") %>'>                        </asp:TextBox><br />                        job_id:                        <asp:TextBox ID="job_idTextBox" runat="server" Text='<%# Bind("job_id") %>'>                        </asp:TextBox><br />                        <asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"                            Text="Insert">                        </asp:LinkButton>                        <asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"                            Text="Cancel">                        </asp:LinkButton>                    </InsertItemTemplate>                    <ItemTemplate>                        Customer_ID:                        <asp:Label ID="Customer_IDLabel" runat="server" Text='<%# Eval("Customer_ID") %>'>                        </asp:Label><br />                        Fname:                        <asp:Label ID="FnameLabel" runat="server" Text='<%# Bind("Fname") %>'></asp:Label><br />                        lname:                        <asp:Label ID="lnameLabel" runat="server" Text='<%# Bind("lname") %>'></asp:Label><br />                        job_id:                        <asp:Label ID="job_idLabel" runat="server" Text='<%# Bind("job_id") %>'></asp:Label><br />                        <asp:LinkButton ID="EditButton" runat="server" CausesValidation="False" CommandName="Edit"                            Text="Edit">                        </asp:LinkButton>                        <asp:LinkButton ID="DeleteButton" runat="server" CausesValidation="False" CommandName="Delete"                            Text="Delete">                        </asp:LinkButton>                        <asp:LinkButton ID="NewButton" runat="server" CausesValidation="False" CommandName="New"                            Text="New">                        </asp:LinkButton>                    </ItemTemplate>                </asp:FormView>            </td>        </tr>        <tr>            <td colspan="2">                <asp:SqlDataSource ID="SqlDataSource1" runat="server"                     ConnectionString="<%$ ConnectionStrings:pubsConnectionString %>"                     InsertCommand="InsertCustomers" InsertCommandType="StoredProcedure"                     SelectCommand="SelectCustomers" SelectCommandType="StoredProcedure"                     UpdateCommand="UpdateCustomers" UpdateCommandType="StoredProcedure" DeleteCommand="DeleteCustomers" DeleteCommandType="StoredProcedure">                    <InsertParameters>                        <asp:Parameter Name="CustID" Type="String" />                        <asp:Parameter Name="FName" Type="String" />                        <asp:Parameter Name="LName" Type="String" />                        <asp:Parameter Name="JobID" Type="Int16" />                    </InsertParameters>                    <UpdateParameters>                        <asp:Parameter Name="FName" Type="String" />                        <asp:Parameter Name="LName" Type="String" />                        <asp:Parameter Name="JobID" Type="Int16" />                        <asp:Parameter Name="CustID" Type="String" />                    </UpdateParameters>                    <DeleteParameters>                        <asp:Parameter Name="CustID" Type="String" />                    </DeleteParameters>                </asp:SqlDataSource>            </td>        </tr>        <tr>            <td colspan="2">            </td>        </tr>    </table>    </form></body></html>

View Replies !

Procedure Or Function Has Too Many Arguments
Dear all,I have the following stored proc:-SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS OFF GOALTER PROCEDURE dbo.stpLoginUser(@login Varchar(255),@password Varchar(255),@email Varchar(255) OUTPUT,@username Varchar(255) OUTPUT,@id int OUTPUT)ASBEGIN/*Check for valid login and password*/SET @username = ' 'Select @id = id_u, @username = first_name, @email = email from pod_Users where email = @login AND u_password = @passwordENDGOSET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GOand basically the user enters a username and a password.However I got the following error:-Procedure or function has too many argumentsI tried renaming my stored proc name but to no avail.I am calling this stored proc from a vb.net program as follows:-Dim conn As SqlConnectionDim cmd As SqlCommandDim RetVal As Integer = -1Dim FullName As String' create the conection object for scalar reader to useconn = New SqlConnectionconn.ConnectionString = ConnectionString' return the players pk_playercmd = New SqlCommandcmd.CommandType = CommandType.StoredProcedurecmd.Connection = conncmd.CommandText = "stpLoginUser"cmd.Parameters.Add("@login", SqlDbType.NVarChar, 255)cmd.Parameters("@login").Value = usernamecmd.Parameters.Add("@password", SqlDbType.NVarChar, 255)cmd.Parameters("@password").Value = passwordcmd.Parameters.Add("@username", SqlDbType.NVarChar, 255)cmd.Parameters("@username").Direction = ParameterDirection.Outputcmd.Parameters.Add("@email", SqlDbType.NVarChar, 255)cmd.Parameters("@email").Direction = ParameterDirection.Outputcmd.Parameters.Add("@id", SqlDbType.Int)cmd.Parameters("@id").Direction = ParameterDirection.OutputTryconn.Open()cmd.ExecuteNonQuery()RetVal = cmd.Parameters("@id").Value()FullName = cmd.Parameters("@username").Value()'CatchCatch e As ExceptionConsole.WriteLine(e.ToString()) ' Print the error message to the user.RetVal = -1Finallyconn.Close()End TryCan anybody help me pls?Thanks for your help

View Replies !

Procedure Or Function Sppaintinsert Has Too Many Arguments Specified, Please Help
Hi,I cant see why this will not work, when i run the page and try and perform a function it clicks me out and underlines
SQLCommand.ExecuteNonQuery() with this error Procedure or function sppaintinsert has too many arguments specified
Code below:
Imports System.IO
Imports System.Data
Imports System.Data.SqlClientPartial Class admin
Inherits System.Web.UI.PageProtected Sub btnUpload_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpload.Click
Dim strFileName As String
Dim strFilePath As String
Dim strFolder As String
Dim strPicTitle As StringDim SQLConnection As Data.SqlClient.SqlConnectionDim SQLCommand As Data.SqlClient.SqlCommand

strFolder = "C:Documents and SettingsRoss HintonMy DocumentsVisual Studio 2005WebSitesjessicawebsitePictures"
strFileName = oFile.PostedFile.FileName
strFileName = Path.GetFileName(strFileName)
strPicTitle = TextBox1.Text
If (Not Directory.Exists(strFolder)) Then
Directory.CreateDirectory(strFolder)
End If
strFilePath = strFolder & strFileName
If File.Exists(strFilePath) Then
lblUploadResult.Text = strFileName & " already exists on the server!"
ElseSQLConnection = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|picturesdb.mdf;Integrated Security=True;User Instance=True")SQLCommand = New SqlCommand
SQLCommand.CommandType = CommandType.StoredProcedure
If DropDownList.SelectedItem.Value = 0 Then
SQLCommand.CommandText = "paintingpictures"
Else
SQLCommand.CommandText = "spdrawinsert"
End If
SQLCommand.Connection = SQLConnection
SQLConnection.Open()
SQLCommand.Parameters.AddWithValue("@image", "Pictures" + strFileName) ' sp parameter nameSQLCommand.Parameters.AddWithValue("@Title", strPicTitle)
SQLCommand.ExecuteNonQuery()
oFile.PostedFile.SaveAs(strFilePath)
lblUploadResult.Text = strFileName & " has been successfully uploaded."
End If
frmConfirmation.Visible = TrueEnd Sub
End ClassALTER PROCEDURE paintingpictures
@image VARCHAR(50)
AS
INSERT INTO pictable([image])
VALUES (@image)

View Replies !

Procedure Or Function &<stored_procedure_name&> Has Too Many Arguments Specified.
Thanks in advance,
I am getting the "Procedure or function JobsDb_Development_Update has too many arguments specified." error. Below is the sp and the vwd generated sqldatasource, any suggestions?
Thanks
Nick

Update Stored Procedure:
ALTER PROCEDURE [dbo].[JobsDb_Development_Update]
@sDevelopmentArea varchar(255), @sDevelopmentGoals text, @sDevelopmentPlans text, @sCurrentStatus text, @sFutureState text, @sDetermineFactor text, @bMentorRequested bit,@sMentorList text, @dtCheckPointDate datetime, @dtDateUpdated datetime, @iPlanPKID int
AS
UPDATE JobsDb_Development
SET DevelopmentArea = @sDevelopmentArea, DevelopmentGoals = @sDevelopmentGoals, DevelopmentPlans = @sDevelopmentPlans, CurrentStatus = @sCurrentStatus,
FutureState = @sFutureState, DetermineFactor = @sDetermineFactor, MentorRequested = @bMentorRequested, MentorList = @sMentorList, CheckPointDate = @dtCheckPointDate,
DateUpdated = @dtDateUpdated
WHERE (PlanPKID = @iPlanPKID)
SQL Data Source:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:MyProviderConnectionString %>"
DeleteCommand="JobsDb_Development_Delete" DeleteCommandType="StoredProcedure"
InsertCommand="JobsDb_Development_Insert" InsertCommandType="StoredProcedure"
SelectCommand="JobsDb_Development_SelectOne"
SelectCommandType="StoredProcedure" UpdateCommand="JobsDb_Development_Update"
UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="txtUserName" Name="sUserName"
PropertyName="Text" Type="String" />
</SelectParameters>
<DeleteParameters>
<asp:Parameter Name="iPlanPKID" Type="Int32" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="sDevelopmentGoals" Type="String" />
<asp:Parameter Name="sDevelopmentPlans" Type="String" />
<asp:Parameter Name="sCurrentStatus" Type="String" />
<asp:Parameter Name="sFutureState" Type="String" />
<asp:Parameter Name="sDetermineFactor" Type="String" />
<asp:Parameter Name="bMentorRequested" Type="Boolean" />
<asp:Parameter Name="sMentorList" Type="String" />
<asp:Parameter Name="dtCheckPointDate" Type="DateTime" />
<asp:Parameter Name="dtDateUpdated" Type="DateTime" />
<asp:Parameter Name="iPlanPKID" Type="Int32" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="sUserName" Type="String" />
<asp:Parameter Name="sDevelopmentArea" Type="String" />
<asp:Parameter Name="sDevelopmentGoals" Type="String" />
<asp:Parameter Name="sDevelopmentPlans" Type="String" />
<asp:Parameter Name="sCurrentStatus" Type="String" />
<asp:Parameter Name="sFutureState" Type="String" />
<asp:Parameter Name="sDetermineFactor" Type="String" />
<asp:Parameter Name="bMentorRequested" Type="Boolean" />
<asp:Parameter Name="sMentorList" Type="String" />
<asp:Parameter Name="dtCheckPointDate" Type="DateTime" />
<asp:Parameter Name="dtDateAdded" Type="DateTime" />
<asp:Parameter Name="dtDateUpdated" Type="DateTime" />
<asp:Parameter Direction="InputOutput" Name="iPlanPKID" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource>

View Replies !

HELP!!! - Procedure Or Function SpInsertNewProduct Has Too Many Arguments Specified
Hi All,
I'm getting this annoying message when I try to call my Sp on an insert. I've executed the SP straight from SQL Server 2005 Express and it works fine. but I think I have a problem how I'm calling it.
The SP-------------------------------------------------------------------------
ALTER PROCEDURE dbo.spInsertNewProduct(
@productName nvarchar(50),
@productSummary text,
@productDesc text,
@productPhoto int,
@productFeaturelist text,
@productTestimonials text,
@productFile1 int,
@productFile1_Title nvarchar(50),
@productFile2 int,
@productFile1_Title nvarchar(50),
@NewProductID int OUTPUT)AS
-- inserts new product
INSERT INTO [tbl_products] ([productName], [productSummary], [productDesc], [productPhoto], [productFeaturelist], [productTestimonials], [productFile1], [productFile1_Title], [productFile2], [productFile2_Title])
VALUES (@productName, @productSummary, @productDesc, @productPhoto, @productFeaturelist, @productTestimonials, @productFile1, @productFile1_Title, @productFile2, @productFile2_Title);
-- Read the just-inserted productID into @NewProductID
SET @NewProductID = SCOPE_IDENTITY();
-------------------------------------------------------------------------
The DataSource-------------------------------------------------------------------------
<asp:SqlDataSource ID="dsproduct" runat="server" ConnectionString="<%$ ConnectionStrings:myConn %>"            InsertCommand="spInsertNewProduct" InsertCommandType="StoredProcedure">            <InsertParameters>                <asp:Parameter Name="productName" Type="String" />                <asp:Parameter Name="productSummary" Type="String" />                <asp:Parameter Name="productDesc" Type="String" />                <asp:Parameter Name="productPhoto" Type="String" />                <asp:Parameter Name="productFeaturelist" Type="String" />                <asp:Parameter Name="productTestimonials" Type="String" />                <asp:Parameter Name="productFile1" Type="String" />                <asp:Parameter Name="productFile1_Title" Type="String" />                <asp:Parameter Name="productFile2" Type="String" />                <asp:Parameter Name="productFile2_Title" Type="String" />                <asp:Parameter Direction="Output" Name="NewProductID" Type="Int32" />            </InsertParameters>        </asp:SqlDataSource>-------------------------------------------------------------------------
In code behind I grab params from front end dropdowns:-------------------------------------------------------------------------
    Sub InsertProduct(ByVal Src As Object, ByVal Args As DetailsViewInsertEventArgs)
        dsProduct.InsertParameters("productPhoto").DefaultValue = CType(dvEditProduct.FindControl("ddlProdImage"), DropDownList).SelectedValue
        dsProduct.InsertParameters("productFile1").DefaultValue = CType(dvEditProduct.FindControl("ddlProdFile1"), DropDownList).SelectedValue
        dsProduct.InsertParameters("productFile2").DefaultValue = CType(dvEditProduct.FindControl("ddlProdFile2"), DropDownList).SelectedValue
        lblStatus.Text = "Product has been added to the database"    End Sub-------------------------------------------------------------------------
I can't see how in the VB front end file how there can be too many params? Any help is greatly appreciated!

View Replies !

Procedure Or Function StoredProcedure1 Has Too Many Arguments Specified
Hi,

I keep on getting the same error for my stored procedure:System.Data.SqlClient.SqlException: Procedure or function StoredProcedure1 has too many arguments specified.The procedure itself looks like this:@imie varchar(255), @nazwisko varchar(255), @email varchar(255), @username varchar(255), @password varchar(255), @id_roli Int, @PESEL varchar(11), @ulica text, @numer_domu int, @numer_mieszkania int, @kod_pocztowy varchar(7), @miasto text, @telefon text, @id_kandydat int, @id_kierunku int, @id_stan int ASBeginSet nocount on Insert into Uzytkownik (imie, nazwisko, email, username, password, id_roli, PESEL, ulica, numer_domu, numer_mieszkania, kod_pocztowy, miasto, telefon) values ( @imie, @nazwisko, @email, @username, @password, @id_roli, @PESEL, @ulica, @numer_domu, @numer_mieszkania, @kod_pocztowy, @miasto, @telefon) select @id_kandydat=@@IDENTITY Insert into Kandydat_na_Kierunek (id_kandydat, id_kierunku, id_stan) Values (@id_kandydat, @id_kierunku, @id_stan) SET NOCOUNT OFF ENDand the code that uses it: SqlConnection con; con = new SqlConnection("Data Source=ELF;Initial Catalog=logos;Integrated Security=True"); SqlCommand cmd = new SqlCommand("StoredProcedure1", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add(new SqlParameter("@imie", TextBox3.Text)); cmd.Parameters.Add(new SqlParameter("@nazwisko", TextBox4.Text)); cmd.Parameters.Add(new SqlParameter("@email", TextBox6.Text)); cmd.Parameters.Add(new SqlParameter("@username", Label2.Text)); cmd.Parameters.Add(new SqlParameter("@password", Label1.Text)); cmd.Parameters.Add(new SqlParameter("@id_roli", '1')); cmd.Parameters.Add(new SqlParameter("@PESEL", TextBox5.Text)); cmd.Parameters.Add(new SqlParameter("@ulica", TextBox8.Text)); cmd.Parameters.Add(new SqlParameter("@numer_domu", TextBox9.Text)); cmd.Parameters.Add(new SqlParameter("@numer_mieszkania", TextBox10.Text)); cmd.Parameters.Add(new SqlParameter("@kod_pocztowy", TextBox11.Text)); cmd.Parameters.Add(new SqlParameter("@miasto", TextBox12.Text)); cmd.Parameters.Add(new SqlParameter("@telefon", TextBox13.Text)); if (DropDownList1.SelectedValue == "1") { } else { cmd.Parameters.Add(new SqlParameter("@id_kierunku", DropDownList1.SelectedValue)); cmd.Parameters.Add(new SqlParameter("@id_stan", '1')); } if (DropDownList2.SelectedValue == "1") { } else { cmd.Parameters.Add(new SqlParameter("@id_kierunku", DropDownList2.SelectedValue)); cmd.Parameters.Add(new SqlParameter("@id_stan", '1')); } if (DropDownList3.SelectedValue == "1") { } else { cmd.Parameters.Add(new SqlParameter("@id_kierunku", DropDownList3.SelectedValue)); cmd.Parameters.Add(new SqlParameter("@id_stan", '1')); } con.Open(); cmd.ExecuteNonQuery(); con.Close();Could somebody explain what is wrong with this? I dpn't really unserstand the meaning of error. Any help will be apreaciated.Regards,N.

View Replies !

Procedure Or Function SavePhotoHotelLang Has Too Many Arguments Specified.
Hi all I having suffering from a strange behavior when trying to update. I receive the following error :

Here is my code: Procedure or function SavePhotoHotelLang has too many arguments specified.

<asp:SqlDataSource ID="SqlDataSourceHotelPhotoList" runat="server" ConnectionString="<%$ ConnectionStrings:smileDBConnectionString %>"SelectCommand="SELECT phl.PhotoHotelLangId, ph.smallfilepath, ph.photorank, pht.Type, phl.name, phl.description, ph.PhotoHotelId FROM datPhotoHotel ph
INNER JOIN datPhotoHotelType pht ON ph.PhotoHotelTypeId = pht.PhotoHotelTypeId
LEFT OUTER JOIN datPhotoHotelLang phl on ph.PhotoHotelId = phl.PhotoHotelId WHERE HotelId = @HotelId and ( LanguageId = @languageId or LanguageId is null)"
UpdateCommand="SavePhotoHotelLang" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="HotelId" QueryStringField="HotelId" Type="int32" />
<asp:ControlParameter Name="languageId" ControlID="ddlLanguageForGV" PropertyName="SelectedValue" Type="int32" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="name"/>
<asp:Parameter Name="Description" />
<asp:ControlParameter Name="languageId" ControlID="ddlLanguageForGV" PropertyName="SelectedValue"/>
<asp:Parameter Name="PhotoHotelLangId" />
<asp:Parameter Name="PhotoHotelId" />
</UpdateParameters>
</asp:SqlDataSource>
<Grids:BulkEditGridView
ID="GvHotelPhotoList" runat="server"
DataSourceID="SqlDataSourceHotelPhotoList" AutoGenerateColumns="false" SaveButtonID="saveBtn"
DataKeyNames="PhotoHotelLangId, PhotoHotelId">
<Columns>
<asp:TemplateField>
<itemtemplate>
<asp:Image id="smallimage" runat="server" ImageUrl='<%# Eval("smallFilePath") %>'></asp:Image>
</itemtemplate>
<Edititemtemplate>
<asp:Image id="smallimageedit" runat="server" ImageUrl='<%# Eval("smallFilePath") %>'></asp:Image>
</Edititemtemplate>
</asp:TemplateField>
<asp:BoundField DataField="Name" HeaderText="Name"/>
<asp:BoundField DataField="Description" FooterText="Description"/>
<asp:BoundField DataField="photorank" HeaderText="Rank" ReadOnly="true"/>
<asp:BoundField DataField="Type" FooterText="Type" ReadOnly="true"/>
</Columns></Grids:BulkEditGridView>
">'>'>
alter procedure SavePhotoHotelLang         @name varchar(100),                                        @Description varchar(500),                                        @languageId int,                                        @PhotoHotelLangId int,                                        @PhotoHotelId intasbegin
        if ( @PhotoHotelLangId is null )        begin
                        insert into dbo.datPhotoHotelLang (                        name,                        Description,                        languageId                        )                        values (@name,                        @Description,                        @languageId,                        @PhotoHotelId)        end        else        begin
                        update dbo.datPhotoHotelLang    set name = @name,                                                            Description = @Description                                                        where PhotoHotelLangId = @PhotoHotelLangId
        endend

View Replies !

Procedure Or Function DeleteSender Has Too Many Arguments Specified.
I'm Deleting my record in the database using stored procedure and I'm always getting this error :Procedure or function DeleteSender has too many arguments specified. same as I insert record... here's my stored proc for delete:set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[DeleteSender]@RecNo int ASDELETE FROM [Sender] WHERE [RecNo] = @RecNo for insert:set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[InsertSender](@SenderID nvarchar(50), @SenderLastName nvarchar(50), @SenderFirstName nvarchar(50), @SenderAddress nvarchar(50), @SenderCity nvarchar(50), @SenderState nvarchar(25), @SenderZip nvarchar(10), @SenderTel nvarchar(25), @FS int, @TB int, @Status nvarchar(10), @EndBalance money)ASINSERT INTO [Sender] ([SenderID], [SenderLastName], [SenderFirstName], [SenderAddress], [SenderCity], [SenderState], [SenderZip], [SenderTel], [FS], [TB], [Status], [EndBalance]) VALUES (@SenderID, @SenderLastName, @SenderFirstName, @SenderAddress, @SenderCity, @SenderState, @SenderZip, @SenderTel, @FS, @TB, @Status, @EndBalance) aspx:<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %><%@ Register src="FormControl.ascx" TagName="FormControl" TagPrefix="uc1" %><%@ Register Assembly="RadGrid.Net2" Namespace="Telerik.WebControls" TagPrefix="radG" %><%@ Register Assembly="RadComboBox.Net2" Namespace="Telerik.WebControls" TagPrefix="radC" %><%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="radI" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server"> <title>Sender</title> <link href="sender.css" rel="stylesheet" type="text/css" /></head><body> <form id="form1" runat="server"> <div class="wrapper"> <div class="banner"> <radG:RadGrid ID="rgSender" runat="server" GridLines="None" DataSourceID="sqlDataSource1" EnableAJAX="True" ShowStatusBar="True" AllowAutomaticInserts="True" AllowAutomaticUpdates="True" AllowAutomaticDeletes="True" Skin="3D" AutoGenerateColumns="False"> <MasterTableView CommandItemDisplay="Top" DataKeyNames="RecNo" DataSourceID="sqlDataSource1"> <ExpandCollapseColumn Visible="False"> <HeaderStyle Width="19px" /> </ExpandCollapseColumn> <RowIndicatorColumn Visible="False"> <HeaderStyle Width="20px" /> </RowIndicatorColumn> <EditFormSettings EditFormType="Template"> <FormTemplate> <table border="0"> <tr> <td> <asp:Label ID="Label1" runat="server" Text="Record No.:" Visible='<%# rgSender.EditIndexes.Count > 0 %>'></asp:Label></td> <td> <radI:RadTextBox ID="rtbRecNo" runat="server" Text='<%# Bind("RecNo") %>' Visible='<%# rgSender.EditIndexes.Count > 0 %>'> </radI:RadTextBox></td> <td> <asp:Label ID="Label8" runat="server" Text="Zip Code:"></asp:Label></td> <td> <radI:RadTextBox ID="rtbZip" runat="server" Text='<%# Bind("SenderZip") %>'> </radI:RadTextBox></td> </tr> <tr> <td> <asp:Label ID="Label2" runat="server" Text="Sender ID:"></asp:Label></td> <td><radI:RadTextBox ID="rtbSenderID" runat="server" Text='<%# Bind("SenderID") %>'> </radI:RadTextBox></td> <td> <asp:Label ID="Label9" runat="server" Text="Telephone #:"></asp:Label></td> <td><radI:RadTextBox ID="rtbTel" runat="server" Text='<%# Bind("SenderTel") %>'> </radI:RadTextBox></td> </tr> <tr> <td><asp:Label ID="Label3" runat="server" Text="First Name:"></asp:Label></td> <td><radI:RadTextBox ID="rtbFName" runat="server" Text='<%# Bind("SenderFirstName") %>'> </radI:RadTextBox></td> <td> <asp:Label ID="Label10" runat="server" Text="Total Free Sent:"></asp:Label></td> <td><radI:RadTextBox ID="rtbFS" runat="server" Text='<%# Bind("FS") %>'> </radI:RadTextBox></td> </tr> <tr> <td><asp:Label ID="Label4" runat="server" Text="Last Name:"></asp:Label></td> <td><radI:RadTextBox ID="rtbLName" runat="server" Text='<%# Bind("SenderLastName") %>'> </radI:RadTextBox></td> <td><asp:Label ID="Label11" runat="server" Text="Total Box Sent:"></asp:Label></td> <td> <radI:RadTextBox ID="rtbBS" runat="server" Text='<%# Bind("TB") %>'> </radI:RadTextBox></td> </tr> <tr> <td> <asp:Label ID="Label5" runat="server" Text="Address:"></asp:Label></td> <td><radI:RadTextBox ID="rtbAddress" runat="server" Text='<%# Bind("SenderAddress") %>'> </radI:RadTextBox></td> <td><asp:Label ID="Label12" runat="server" Text="Status:"></asp:Label></td> <td><radI:RadTextBox ID="rtbStatus" runat="server" Text='<%# Bind("Status") %>'> </radI:RadTextBox></td> </tr> <tr> <td><asp:Label ID="Label6" runat="server" Text="City:"> </asp:Label></td> <td> <radI:RadTextBox ID="rtbCity" runat="server" Text='<%# Bind("SenderCity") %>'> </radI:RadTextBox></td> <td><asp:Label ID="Label13" runat="server" Text="End Balance:"></asp:Label></td> <td><radI:RadTextBox ID="rtbEndBalance" runat="server" Text='<%# Bind("EndBalance") %>'> </radI:RadTextBox></td> </tr> <tr> <td> <asp:Label ID="Label7" runat="server" Text="State:"></asp:Label></td> <td><radI:RadTextBox ID="rtbState" runat="server" Text='<%# Bind("SenderState") %>'> </radI:RadTextBox> </td> <td> <asp:Button ID="btnUpdate" Text='<%# IIf(CType(Container,GridItem).OwnerTableView.IsItemInserted,"Insert","Update") %>' runat="server" CommandName='<%# IIf(CType(Container,GridItem).OwnerTableView.IsItemInserted,"PerformInsert","Update") %>'></asp:Button>   <asp:Button ID="btnCancel" Text="Cancel" runat="server" CausesValidation="False" CommandName="Cancel"></asp:Button></td> </tr> </table> </FormTemplate> </EditFormSettings> <Columns> <radG:GridEditCommandColumn ButtonType="ImageButton"/> <radG:GridTemplateColumn HeaderText="Sender ID" UniqueName="TCSenderID"> <ItemTemplate> <asp:Label ID="lblSenderID" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "SenderID") %>'></asp:Label> </ItemTemplate> </radG:GridTemplateColumn> <radG:GridTemplateColumn HeaderText="First Name" UniqueName="TCSenderFName"> <ItemTemplate> <asp:Label ID="lblSenderFName" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "SenderFirstName") %>'></asp:Label> </ItemTemplate> </radG:GridTemplateColumn> <radG:GridTemplateColumn HeaderText="Last Name" UniqueName="TCSenderLName"> <ItemTemplate> <asp:Label ID="lblSenderLName" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "SenderLastName") %>'></asp:Label> </ItemTemplate> </radG:GridTemplateColumn> <radG:GridButtonColumn UniqueName="ButtonColumn" ConfirmText="Are you sure?" Text="Delete" CommandName="Delete" ButtonType="ImageButton" ImageUrl="RadControls/Grid/Skins/Default/Delete.gif" /> </Columns> </MasterTableView> </radG:RadGrid></div> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConString_TO_Cargo %>" SelectCommandType="StoredProcedure" SelectCommand="sp_SelectSender" DeleteCommandType="StoredProcedure" DeleteCommand="DeleteSender" InserCommandType="StoredProcedure" InsertCommand="InsertSender" OldValuesParameterFormatString="original_{0}" UpdateCommand="UPDATE [Sender] SET [SenderID] = @SenderID, [SenderLastName] = @SenderLastName, [SenderFirstName] = @SenderFirstName, [SenderAddress] = @SenderAddress, [SenderCity] = @SenderCity, [SenderState] = @SenderState, [SenderZip] = @SenderZip, [SenderTel] = @SenderTel, [FS] = @FS, [TB] = @TB, [Status] = @Status, [EndBalance] = @EndBalance WHERE [RecNo] = @original_RecNo AND [SenderID] = @original_SenderID AND [SenderLastName] = @original_SenderLastName AND [SenderFirstName] = @original_SenderFirstName AND [SenderAddress] = @original_SenderAddress AND [SenderCity] = @original_SenderCity AND [SenderState] = @original_SenderState AND [SenderZip] = @original_SenderZip AND [SenderTel] = @original_SenderTel AND [FS] = @original_FS AND [TB] = @original_TB AND [Status] = @original_Status AND [EndBalance] = @original_EndBalance"> <DeleteParameters> <asp:Parameter Name="RecNo" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="SenderID" Type="String" /> <asp:Parameter Name="SenderLastName" Type="String" /> <asp:Parameter Name="SenderFirstName" Type="String" /> <asp:Parameter Name="SenderAddress" Type="String" /> <asp:Parameter Name="SenderCity" Type="String" /> <asp:Parameter Name="SenderState" Type="String" /> <asp:Parameter Name="SenderZip" Type="String" /> <asp:Parameter Name="SenderTel" Type="String" /> <asp:Parameter Name="FS" Type="Int32" /> <asp:Parameter Name="TB" Type="Int32" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="EndBalance" Type="Decimal" /> <asp:Parameter Name="original_RecNo" Type="Int32" /> <asp:Parameter Name="original_SenderID" Type="String" /> <asp:Parameter Name="original_SenderLastName" Type="String" /> <asp:Parameter Name="original_SenderFirstName" Type="String" /> <asp:Parameter Name="original_SenderAddress" Type="String" /> <asp:Parameter Name="original_SenderCity" Type="String" /> <asp:Parameter Name="original_SenderState" Type="String" /> <asp:Parameter Name="original_SenderZip" Type="String" /> <asp:Parameter Name="original_SenderTel" Type="String" /> <asp:Parameter Name="original_FS" Type="Int32" /> <asp:Parameter Name="original_TB" Type="Int32" /> <asp:Parameter Name="original_Status" Type="String" /> <asp:Parameter Name="original_EndBalance" Type="Decimal" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="SenderID" Type="String" /> <asp:Parameter Name="SenderLastName" Type="String" /> <asp:Parameter Name="SenderFirstName" Type="String" /> <asp:Parameter Name="SenderAddress" Type="String" /> <asp:Parameter Name="SenderCity" Type="String" /> <asp:Parameter Name="SenderState" Type="String" /> <asp:Parameter Name="SenderZip" Type="String" /> <asp:Parameter Name="SenderTel" Type="String" /> <asp:Parameter Name="FS" Type="Int32" /> <asp:Parameter Name="TB" Type="Int32" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="EndBalance" Type="Decimal" /> </InsertParameters> </asp:SqlDataSource> <br /> <radG:RadGrid ID="rgSenderDetails" runat="server" AutoGenerateColumns="False" GridLines="None"> <MasterTableView> <ExpandCollapseColumn Visible="False"> <HeaderStyle Width="19px" /> </ExpandCollapseColumn> <RowIndicatorColumn Visible="False"> <HeaderStyle Width="20px" /> </RowIndicatorColumn> </MasterTableView> </radG:RadGrid><br /> </div> </form></body></html> hope you can help me guys/// stings...

View Replies !

Procedure Or Function InsertUpdateArtist_Tracks Has Too Many Arguments Specified.
Hi
While coding with ASP.NET 2.0 I came across this error "Procedure or function InsertUpdateArtist_Tracks has too many arguments specified."
Its quite frustrating because I dont know what arguments are being referred to because I've clearly assigned the correct parameters with their correct values to this Stored procedure :InsertUpdateArtist_Tracks
Please can some help me with this? is there something fundamentality wrong with my code (Below) or is this a know Microsoft stuff up?
or by the way I'm using SQL Server 2005 and ASP.NET 2.0
Below is my sample code:
..............
'Insert or Update Artist_tracks table
Response.Write("<br><b>Inserting or Updating Artist_tracks table</b>")
AT_Title = SearchArtistsResults(i).title
AT_Meta_ID = SearchArtistsResults(i).meta_id
AT_AA_ID = AA_ID
Dim ParamTitle As SqlParameter
Dim ParamMeta As SqlParameter
Dim ParamAA_ID As SqlParameter
dbCommand.CommandText = "InsertUpdateArtist_Tracks"
dbCommand.CommandType = Data.CommandType.StoredProcedure
dbCommand.Connection = conn
ParamTitle = dbCommand.Parameters.Add(New SqlParameter("@AT_Title", Data.SqlDbType.VarChar, 50))
ParamTitle.Value = AT_Title
ParamTitle.Direction = Data.ParameterDirection.Input
Response.Write("<br>Sent through this Title =" & AT_Title)
ParamMeta = dbCommand.Parameters.Add(New SqlParameter("@AT_Meta_ID", Data.SqlDbType.Int))
ParamMeta.Value = AT_Meta_ID
ParamMeta.Direction = Data.ParameterDirection.Input
Response.Write("<br>Sent through this Meta_id =" & AT_Meta_ID)
ParamAA_ID = dbCommand.Parameters.Add(New SqlParameter("@AT_AA_ID", Data.SqlDbType.Int))
ParamAA_ID.Value = AT_AA_ID
ParamAA_ID.Direction = Data.ParameterDirection.Input
Response.Write("<br>Sent through this AT_AA_ID =" & AT_AA_ID)
conn.Open()
dbCommand.ExecuteNonQuery()
conn.Close()
..................

Thanks in Advance

View Replies !

Error: Procedure Or Function Has Too Many Arguments Specified
Hi,

I've found that I'm not the first one to get the error

"Procedure or function x has too many arguments specified"

while working with Stored Procedures (which is no surprise at all). But
all suggested solutions didn't help, maybe this is because I
misunderstood the whole concept. The situation is: On my page there is
a FormView control including the EditItemTemplate. The database
contains a Stored Procedure called UpdatePersonByID which is working
fine as long as executed in Visual Web Developer. Here's the procedure
code:

ALTER PROCEDURE dbo.UpdatePersonByID
    (
        @LastName varchar(50),
        @FirstName varchar(50),
        @Phone varchar(50),
        @PhonePrivate varchar(50),
        @PhoneMobile varchar(50),
        @Email varchar(50)
    )
AS
    UPDATE
        tblPersons
        SET
            PersonLastName = @LastName,
            PersonFirstName = @FirstName,
            PersonPhone = @Phone,
            PersonPhonePrivate = @PhonePrivate,
            PersonPhoneMobile = @PhoneMobile,
            PersonEmail = @Email
        WHERE
            PersonLastName = @LastName
    RETURN

This is not exactly what it will finally have to do, of course the
WHERE-clause later will contain an ID comparison. But since I tried to
break down my code as much as possible I changed it to what you see
right now. Here's the aspx-source (the red stuff is what I think is
important):

<%@ Page
    Language="VB"
    MasterPageFile="fb10.master"
    AutoEventWireup="false"
    CodeFile="codebehind/staff.aspx.vb"
    Inherits="staff"
    meta:ResourceKey="PageResource"
%>
<%@ MasterType VirtualPath ="~/fb10.master" %>
<asp:Content
    ID="ContentStaff"
    ContentPlaceHolderID="cphContentMain"
    Runat="Server">

    <h3 id="hdStaff" runat="server" meta:resourcekey="Staff" />

    
    <asp:SqlDataSource
        ID="srcStaff"
        runat="server"
        ConflictDetection="CompareAllValues"
        ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
        SelectCommandType="StoredProcedure"
        SelectCommand="SelectPersonNames"
    />
    <asp:DropDownList
        ID="ddlStaff"
        runat="server"
        DataSourceID="srcStaff"
        DataTextField="CompleteName"
        DataValueField="PersonID"
        AutoPostBack="True">
    </asp:DropDownList>

    
    <asp:SqlDataSource
        ID="srcPerson"
        runat="server"
        ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
        ProviderName="System.Data.SqlClient"
        SelectCommand="SelectPersonByID"
        SelectCommandType="StoredProcedure"
        UpdateCommand="UpdatePersonByID"
        UpdateCommandType="StoredProcedure"
        OldValuesParameterFormatString="{0}" >
        <SelectParameters>
            <asp:ControlParameter
                ControlID="ddlStaff"
                DefaultValue="1"
                Name="ID"
                PropertyName="SelectedValue"
                Type="Int32" />
        </SelectParameters>
        <UpdateParameters>
            <asp:Parameter Name="LastName" Type="String" />
            <asp:Parameter Name="FirstName" Type="String" />
            <asp:Parameter Name="Phone" Type="String" />
            <asp:Parameter Name="PhonePrivate" Type="String" />
            <asp:Parameter Name="PhoneMobile" Type="String" />
            <asp:Parameter Name="Email" Type="String" />
        </UpdateParameters>
    </asp:SqlDataSource>

    
    <asp:SqlDataSource
        ID="srcBuildings"
        runat="server"
        ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
        ProviderName="System.Data.SqlClient"
        SelectCommand="SelectBuildings"
        SelectCommandType="StoredProcedure">
    </asp:SqlDataSource>

    <asp:FormView
        ID="fvStaff"
        runat="server"
        DataSourceID="srcPerson">
        <EditItemTemplate>
            
            <asp:SqlDataSource
                ID="srcRooms"
                runat="server"


ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
                ProviderName="System.Data.SqlClient"
                SelectCommand="SelectRoomsByBuildingID"
                SelectCommandType="StoredProcedure">
                <SelectParameters>
                    <asp:ControlParameter


ControlID="ddlBuildings"


DefaultValue="1"


Name="ID"


PropertyName="SelectedValue"


Type="Int32"
                    />
                </SelectParameters>
            </asp:SqlDataSource>

            <asp:Label
cssClass="lblIdentifier" ID="lblLastName" runat="server"
meta:resourcekey="LastName" />

<asp:TextBox cssClass="staff" ID="LastName" runat="server"
Text='<%# Bind("PersonLastName")
%>'></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblFirstName" runat="server"
meta:resourcekey="FirstName" />

<asp:TextBox cssClass="staff" ID="FirstName" runat="server"
Text='<%# Bind("PersonFirstName")
%>'></asp:TextBox><br />

            <asp:Label
CssClass="lblIdentifier" ID="lblBuilding" runat="server"
meta:resourcekey="Building"></asp:Label>
            <asp:DropDownList
                ID="ddlBuildings"
                cssClass="small"
                runat="server"
                DataSourceID="srcBuildings"
                DataTextField="BuildingAbbreviation"
                DataValueField="BuildingID"
                AutoPostBack="True"
                SelectedValue='<%# Bind("RoomBuildingID") %>'


OnSelectedIndexChanged="ddlBuildings_SelectedIndexChanged">
            </asp:DropDownList><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblRoom" runat="server"
meta:resourcekey="Room" />
            <asp:DropDownList
                ID="ddlRooms"
                cssClass="small"
                runat="server"
                DataSourceID="srcRooms"
                DataTextField="RoomName"
                DataValueField="RoomID"
                AutoPostBack="true"

    SelectedValue='<%# Bind("PersonRoomID") %>'>
            </asp:DropDownList><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblPhone" runat="server"
meta:resourcekey="Phone" />

<asp:TextBox cssClass="staff" ID="Phone" runat="server" Text='<%#
Bind("PersonPhone") %>'></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblPhonePrivate" runat="server"
meta:resourcekey="Private" />

<asp:TextBox cssClass="staff" ID="PhonePrivate" runat="server"
Text='<%# Bind("PersonPhonePrivate")
%>'></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblPhoneMobile" runat="server"
meta:resourcekey="Mobile" />

<asp:TextBox cssClass="staff" ID="PhoneMobile" runat="server"
Text='<%# Bind("PersonPhoneMobile")
%>'></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblEmail" runat="server"
meta:resourcekey="Email" />

<asp:TextBox cssClass="staff" ID="Email" runat="server" Text='<%#
Bind("PersonEmail") %>'></asp:TextBox><br />


<asp:LinkButton cssClass="lnkButton" ID="UpdateCancelButton"
runat="server" CausesValidation="False" CommandName="Cancel"
Text="<%$resources:translations,
Cancel%>"></asp:LinkButton>

<asp:LinkButton cssClass="lnkButton" ID="UpdateButton"
runat="server" CausesValidation="True" CommandName="Update"
Text="<%$resources:translations,
Update%>"></asp:LinkButton>
        </EditItemTemplate>
        <InsertItemTemplate>
            <asp:Label
cssClass="lblIdentifier" ID="lblLastName" runat="server"
meta:resourcekey="LastName" />

<asp:TextBox ID="PersonLastNameTextBox"
runat="server"></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblFirstName" runat="server"
meta:resourcekey="FirstName" />

<asp:TextBox ID="PersonFirstNameTextBox"
runat="server"></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblBuilding" runat="server"
meta:resourcekey="Building" />

<asp:TextBox ID="BuildingAbbreviationTextBox"
runat="server"></asp:TextBox><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblRoom" runat="server"
meta:resourcekey="Room" />

<asp:TextBox ID="RoomNameTextBox"
runat="server"></asp:TextBox><br />


<asp:LinkButton cssClass="lnkButton" ID="InsertCancelButton"
runat="server" CausesValidation="False" CommandName="Cancel"
Text="<%$resources:translations,
Cancel%>"></asp:LinkButton>

<asp:LinkButton cssClass="lnkButton" ID="InsertButton"
runat="server" CausesValidation="True" CommandName="Insert"
Text="<%$resources:translations,
Insert%>"></asp:LinkButton>
        </InsertItemTemplate>
        <ItemTemplate>
            <asp:Label
cssClass="lblIdentifier" ID="lblLastName" runat="server"
meta:resourcekey="LastName" />
            <asp:Label
cssClass="lblValue" ID="PersonLastNameLabel" runat="server"
Text='<%# Bind("PersonLastName") %>'></asp:Label><br
/>

            <asp:Label
cssClass="lblIdentifier" ID="lblFirstName" runat="server"
meta:resourcekey="FirstName" />
            <asp:Label
cssClass="lblValue" ID="PersonFirstNameLabel" runat="server"
Text='<%# Bind("PersonFirstName") %>'></asp:Label><br
/>

            <asp:Label
cssClass="lblIdentifier" ID="lblBuilding" runat="server"
meta:resourcekey="Building" />
            <asp:Label
cssClass="lblValue" ID="BuildingAbbreviationLabel" runat="server"
Text='<%# Bind("BuildingAbbreviation")
%>'></asp:Label><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblRoom" runat="server"
meta:resourcekey="Room" />
            <asp:Label
cssClass="lblValue" ID="RoomLabel" runat="server" Text='<%#
Bind("RoomName") %>'></asp:Label><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblPhone" runat="server"
meta:resourcekey="Phone" />
            <asp:Label
cssClass="lblValue" ID="PhoneLabel" runat="server" Text='<%#
Bind("PersonPhone") %>'></asp:Label><br />

            <asp:Label
cssClass="lblIdentifier" ID="lplPhonePrivate" runat="server"
meta:resourcekey="Private" />
            <asp:Label
cssClass="lblValue" ID="PhonePrivateLabel" runat="server" Text='<%#
Bind("PersonPhonePrivate") %>'></asp:Label><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblPhoneMobile" runat="server"
meta:resourcekey="Mobile" />
            <asp:Label
cssClass="lblValue" ID="PhoneMobileLabel" runat="server" Text='<%#
Bind("PersonPhoneMobile") %>'></asp:Label><br />

            <asp:Label
cssClass="lblIdentifier" ID="lblEmail" runat="server"
meta:resourcekey="Email" />
            <asp:Label
cssClass="lblValue" ID="EmailLabel" runat="server" Text='<%#
Bind("PersonEmail") %>'></asp:Label><br />


<asp:LinkButton cssClass="lnkButton" ID="DeleteButton"
runat="server" CausesValidation="False" CommandName="Delete"
Text="<%$resources:translations,
Delete%>"></asp:LinkButton>

<asp:LinkButton cssClass="lnkButton" ID="EditButton" runat="server"
CausesValidation="False" CommandName="Edit"
Text="<%$resources:translations,
Edit%>"></asp:LinkButton>
        </ItemTemplate>
    </asp:FormView>
</asp:Content>

And then once again a totally different question: Is there a way to
post the highlighted aspx or vb code into this forum and keep the
colors? i think I've seen that in some posts but didn't wanna do it
manually.

Thanks once again for trying to help,

Toob

View Replies !

Procedure Or Function ImportLand Has Too Many Arguments Specified
Can anybody help me with this error? I am not even sure where to start looking.

i am looping through an arrayList that populates the SqlParameters. I open the database outside the loop, close it outside the loop and execute myCommand.ExecuteNonQuery(); inside the loop for every loop.

The error I am getting is:

System.Data.SqlClient.SqlException: Procedure or function ImportData has too many arguments specified.

Thanks!

View Replies !

Procedure Or Function Recoms Has Too Many Arguments Specified
my sql procedure is like below

select * from tbl where ID in (@IDs)

for example @IDs is "11,23,44,55,66,77,88,99,223,223,445,666"
So it has alot of arguments.sometimes it can be too long

that's the reason to get error message

What must I do ?

View Replies !

Procedure Or Function Login Has Too Many Arguments Specified

i wrote a simply code but i got error " Procedure or function Login has too many

arguments specified." i need help.......

(c# code- stored procedure is below c# code)

--------------

SqlConnection conn = new SqlConnection("data source=cafe06\sqlexpress;initial catalog=ferixxx;Integrated Security=True");

SqlCommand sqlcom = new SqlCommand("Login", conn);

sqlcom.CommandType = CommandType.StoredProcedure;

sqlcom.Parameters.Add("@user", SqlDbType.NVarChar,50 );

sqlcom.Parameters[0].Value = user.Text;--->>>(textbox)

sqlcom.Parameters.Add("@password", SqlDbType.NVarChar,50);

sqlcom.Parameters[1].Value = password.Text;--->>>(textbox)

SqlDataAdapter adap = new SqlDataAdapter(sqlcom);

DataTable table = new DataTable();

conn.Open();

adap.Fill(table);

datag.DataSource = table;
datag.DataBind();

conn.Close();

stored procedure

create procedure [Login]

@user nvarchar(50),
@password nvarchar(50)
AS

select *from members where user=@user and password=@password

GO

View Replies !

Procedure Or Function Sp_MSupdatesysmergearticles Has Too Many Arguments Specified.
Hi,

I've been on this one all day - and now tearing my hair out. I have a large SQL2005 database (migrated from SQL2000) which I'm trying to replicate using a VB6 front end.

The application and database concerned have been working with no problems using merge replication for the last 5 years - however, I now need to port to SQL 2005.

In the VB6 app, I'm using the SQLMerge9 control to handle the replication side of things. The code I'm using is exactly as per the code which works under SQL 2000, however, I'm getting an error message "Procedure or function sp_MSupdatesysmergearticles has too many arguments specified." when I try to initialize the subscription.

I've seen one other item on the web with this problem, and this was someone trying to replicate a 2005 client with a 2000 server. I'm using SQL2005 both ends with merge replication -the replication is set up for SQL2005 clients only, and the database (which incidentally is being created on the subscriber correctly) is in SQL2005 compatibility mode.

Any help would be gratefully appreciated - I haven't got much hair left now.

The code I'm using is as follows:

On Error GoTo Err_Handler

    Set SQLMergeCtl = New SQLMerge
    Dim strSQL As String
    Dim cnn As ADODB.Connection

      ' add subscriber
    strSQL = "EXEC sp_dropsubscriber '[subscriber name]'"
    Set cnn = New ADODB.Connection
    cnn.Open [connection string]

    strSQL = "EXEC sp_addsubscriber '[machine name]', 0 , '[user name]', '[password]', @security_mode = 0"
    On Error Resume Next
    cnn.Execute strSQL

    If Err <> 0 Then
        MsgBox Error
    End If

    strSQL = "sp_dropmergesubscription @publication = '[publication name], @subscriber = '[machine name]', @subscriber_db = '[subscriber database name]', @subscription_type = 'pull'"
    cnn.Execute strSQL
    If Err <> 0 Then
        MsgBox Error
    End If


    On Error GoTo Err_Handler
    cnn.Close
    Set cnn = Nothing

    SQLMergeCtl.Publisher = [publisher name]

    SQLMergeCtl.PublisherSecurityMode = DB_AUTHENTICATION
    SQLMergeCtl.PublisherDatabase = [database name]
    SQLMergeCtl.Publication = [publication name]
    SQLMergeCtl.PublisherLogin = [user name]
    SQLMergeCtl.PublisherPassword = [password]

    SQLMergeCtl.DistributorSecurityMode = DB_AUTHENTICATION
    SQLMergeCtl.Distributor = [distributor name - actually same as the publisher]
    SQLMergeCtl.DistributorLogin = [user name]
    SQLMergeCtl.DistributorPassword =[password]


    SQLMergeCtl.Subscriber = [local machine name]
    SQLMergeCtl.SubscriberSecurityMode = DB_AUTHENTICATION
    SQLMergeCtl.SubscriberLogin = [local user name]
    SQLMergeCtl.SubscriberPassword =[local password]
    SQLMergeCtl.SubscriberDatabase = [local database name]
    SQLMergeCtl.SubscriptionType = PULL
    SQLMergeCtl.ProfileName =[profile name]

    On Error Resume Next
    SQLMergeCtl.AddSubscription CREATE_DATABASE, NONE
    If Err <> 0 Then
        <--snip-->
    End If

    On Error GoTo Err_Handler
    SQLMergeCtl.Initialize
    'Run
    SQLMergeCtl.Run
    'Terminate
    SQLMergeCtl.Terminate

   <--snip-->
          code here to add merge agent removed for brevity - it's not getting this far anyway
   <--snip>

Exit_Handler:
     Exit Sub
Err_Handler:
    MsgBox Error
      Resume Exit_Handler

View Replies !

'Query Failed For The Datatset Reportsource.Procedure Of Function Has Too Many Arguments Specified'

I get an error like 'Query failed for the datatset Reportsource.Procedure of function has too many arguments specified.'
What could be the reason for this error??
please help me

View Replies !

Using Stored Procedure Arguments
Hello. I am pretty new to SQL Stored Procedure, and ran into a problem. I am guessing there is a simple solution to this, as I am self-teaching myself this stuff.

I currently have a procedure that creates a new table, by reading in columns from a variety of Linked Servers (ODBC connection to to Sybase databases)

I will want to generalize a procedure by setting as arguments the ODBC connection name and the name of the new table that will be created ("CREATE TABLE") so I can pass these in.

As a test of this idea, I created this as a simple procedure, but I get a syntax error when I try to Check Syntax this. Do I have to do something else when I reference the string "argu1" to specify a new table name, or an OPEN QUERY Linked table name? Thanks and Happy New Year!

CREATE PROCEDURE gis.pr_PARCEL_TEST( @argu1 char(25)) AS
CREATE TABLE @argu1
GO

View Replies !

Too Many Arguments In Stored Procedure?

Hello,

When I try to call a stored procedure I get an SQL-exception reading "Procedure or function insert_member has too many arguments specified."

As far as I can see the number of parameters in the application match the number of arguments in the stored procedure. I supply 10 parameters in the application and 10 in the procedure. Is the location of the declaration of the argument cgpID a problem?

ALTER PROCEDURE [dbo].[insert_member]

(

@mbrFirstName nvarchar(15),

@mbrLastName nvarchar(15),

@mbrStreetAddress nvarchar(15),

@mbrPostalAddress nvarchar(15),

@mbrTelephoneHome nvarchar(15),

@mbrTelephoneJob nvarchar(15),

@mbrEmail nvarchar(15),

@mbrActivityGroupID int,

@mbrPaymentMethod int

)

AS

INSERT INTO dbo.member(mbrFirstName, mbrLastName, mbrStreetAddress, mbrPostalAddress, mbrTelephoneHome, mbrTelephoneJob, mbrEmail)

VALUES (@mbrFirstName, @mbrLastName, @mbrStreetAddress, @mbrPostalAddress, @mbrTelephoneHome, @mbrTelephoneJob, @mbrEmail)

declare @cgpID int

set @cgpID = (select cgpID from currentgroup where cgpActivityGroupID = @cgpActivityGroupID)

INSERT INTO member_currentgroup

(mbrID, cgpID, mcgPaymentMethod)

values

(@@identity, @cgpID, @mcgPaymentMethod)

View Replies !

Stored Procedure- Passing Arguments
I have the following stored procedure
ALTER PROCEDURE dbo.TextEntered
@searchString varchar(30)
/*
(
@parameter1 datatype = default value,
@parameter2 datatype OUTPUT
)
*/
AS
Select GAVPrimaryKey, NAME from towns where NAME like @searchString order by NAME

RETURN
doesn't work!!!!
I would like to produce the following where s is @searchString:
Select GAVPrimaryKey, NAME from towns where NAME like 's%' order by NAME
Any ideas how I might acomplish this I have tried almost everything !

View Replies !

ERROR: Too Many Arguments Passed To Stored Procedure
Hi,

We have an application written in ASP that calls a MS-SQL stored procedure and passes several parameters. Once in a while, we get this error, but most of the time it works. We can also run this in SQL query analyzer without ever a problem. We've looked at the obvious and found nothing wrong.

Please help! Any suggestions are appreciated.
(I posted this in ASP discussion board but no one replied)

Colleen

--------------------------------------------------------------------------------

|

View Replies !

Variable Number Of Arguments In A Stored Procedure
Can a Sql Server SP have variable number of arguments??? If yes, can somebody point me to a resource demonstrating that??? I need to send variable number of arguments to some of my SPs & iterate them with either foreach or traditional for loop. Any support would be greatly appreciated.

If variable number of arguments are not feasible, then can I pass them as an array to the SP (again a Sample code would be desirable)???

View Replies !

Procedure Or Function 'stored Procedure Name' Expects Parameter Which Was Not Supplied
Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}

As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!

Thanks Nickdel68

View Replies !

Argument Not Specified For Parameter 'arguments' Of Public Function Select(arguments As System.Web.DatasourceSelect Arguments As Collections Ienumerable
I have an SqlDataSource control on my aspx page, this is connected to database by a built in procedure that returns a string dependent upon and ID passed in.
I have the followinbg codewhich is not complet, I woiuld appriciate any help to produce the correct code for the code file
Function GetCategoryName(ByVal ID As Integer) As String sdsCategoriesByID.SelectParameters("ID").Direction = Data.ParameterDirection.Input sdsCategoriesByID.SelectParameters.Item("ID").DefaultValue = 3 sdsCategoriesByID.Select() <<<< THIS LINE COMES UP WITH ERROR 1End Function
ERROR AS FOLLOWS
argument not specified for parameter 'arguments' of public function Select(arguments as System.Web.DatasourceSelect Arguments as Collections ienumerable

Help I have not got much more hair to loose
Thanks Steve

View Replies !

Alter Table Causing Problems In Stored Procedure
I'm running SQL server 2000 sp1. I created a stored procedure that (1) drops a table, (2) recreates it with a "select into" statement, (3) alters the table by adding a field, and then (4) updates that field.

The trouble I'm having is that when I execute the stored procedure I get an error stating that I have an "invalid column name" between steps (2) and (3). It seems as though when I drop the table in step (1), the entire procedure wants to re-compile and it can't get past step (4) because the table hasn't been altered yet.

I've noticed a similar problem in editing stored procedures when they refer to tables or fields that don't exist yet because WITHIN the procedure they are created/modified. I'm not able to get a successful syntax check and therefore not able to save my work.

I must be missing something. Any suggestions?

View Replies !

Drop Stored Procedure Causing Dropped Tables
Hey guys, has anyone ever seen this happen:

Try to move stored proc from one DB to another using DTS, errors on create proc. Create proc manually.

Three tables referenced by that stored proc have been dropped and re-created with the same table structure.

I'm not 100% certain that it happened at exactly the same time, but it seems to be around the same time. Any ideas? Anyone seen this happen before?

View Replies !

Stored Procedure Definition Not Updating, Causing DTS Copy Error
I've got a weird one here. I'm running a DTS package on SQL Server2005. It copies a bunch of stored procedures. I renamed them on theoriginating server and ran the DTS again.The came over with the old name and code!I deleted the DTS and built it from scratch, and the same thinghappened.I ran SELECT * FROM sys.objects where type = 'P' on the source serverand the names were correctI'm explicitly checking which sp to copy rather than using Copy all. Ican see the sp namesI've deleted and recreated the sp on the source server using scriptsI've checked the source server nameI've Refreshed everywhereNothing worksWhy is up_Department_GetAllBySchool trying to be be pulled over whenit doesn't exist?Why is up_Department_GetBySchool not being pulled over when it doesexist?I've heard that SQL 2005 pre-SP2 has a problem where renaming anobject that has a text definition (like sprocs, functions, triggers,views) doesn't update the definition. So if you pull that objectdefinition and run it into your new database, it will use the originalscript, which has the original name.I ransp_helptext 'up_Department_GetBySchool'and checked the CREATE statement at the top. Sure enough, it had theold textI asked our NetAdmin to install SP2 on our server. Then I ransp_refreshsqlmodule 'up_Department_GetForSchool'and got this error:Invalid object name 'up_Department_GetAllForSchool'.So even the code which was supposed to fix it, doesn't. Has anyoneelse had this problem, and managed to fix it?--John Hunter

View Replies !

Calling A Stored Procedure Or Function From Another Stored Procedure
Hello people,

When I am trying to call a function I made from a stored procedure of my creation as well I am getting:

Running [dbo].[DeleteSetByTime].

Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.

No rows affected.

(0 row(s) returned)

@RETURN_VALUE =

Finished running [dbo].[DeleteSetByTime].

This is my function:

ALTER FUNCTION dbo.TTLValue

(

)

RETURNS TABLE

AS

RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'

This is my stored procedure:

ALTER PROCEDURE dbo.DeleteSetByTime

AS

BEGIN

SET NOCOUNT ON

DECLARE @TTL int

SET @TTL = dbo.TTLValue()

DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)

END

CreatedTime is a datetime column and TTL is an integer column.

I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.

Your help is much appreciated.

View Replies !

Retrieving Result Set From Dynamically Called Stored Procedure Or Function In A Function
Is there any way I can retrieve the result set of a Stored Procedurein a function.ALTER FUNCTION dbo.fn_GroupDeviceLink(@groupID numeric)RETURNS @groupDeviceLink TABLE (GroupID numeric, DeviceID numeric)ASBEGINDeclare @command nvarchar(255)SELECT @command = Condition// @command is an SQL string or stored procedue nameFROM DeviceGroupWHERE GroupID = @groupIDINSERT @groupDeviceLinkEXEC @commandRETURNENDIs there any way i can do anything like this. @command is a variableholding the name of a stored produre. I need to run that storedprocure and return the values in such a way that they can be used in aSELECT StatementMy goal is SELECT * FROM Device INNER JOINdbo.fn_GroupDeviceLink(@groupID) ON ....this fn_GroupDeviceLink should run the proper stored procedure andreturn the values. What i also want to do is play with that result setof the specific stored procedure before i return it. Is this possible?If not, what is the work arround?ThanksMark

View Replies !

SQLdatasource With Stored Procedure
I am moving from .net 2003 to 2008. I am trying to populate a gridview with the SQL datasource.
The goal is to have a textbox and when I click a button, I want the gridview to be filtered based on the textbox.
I have all my stored procedure, SQL datasource all set. But how do you implement this.
I dont want to set my textbox a hard coded value. I am trying to achieve a simple task of taking the value from the textbox,and return results based on the grid view.
Any thoughts on this? I am new to SQL datasource and gridviews.
Thanks,
Topcatin

View Replies !

Using Stored Procedure W/SqlDataSource
Am running into the same problem and am manking no headway. I have a working stored procedure which uses an input parameter:
[dbo].[PayWeb_getMCRApprProcView] (@mcr_id int)
In the .aspx file, have set up a SqlDataSource:
<asp:SqlDataSource ID="sds3" runat="server" ConnectionString="<%$ ConnectionStrings:payweb_dbConnectionString %>" SelectCommandType="StoredProcedure">
In the code-behind, I'm trying to set the stored procedure name and parameter in a loop (to create multiple DetailsViews):
for (int i = 0; i < reqs.Length; i++) {sds3.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
sds3.SelectCommand = "PayWeb_getMCRApprProcView";sds3.SelectParameters.Add("@mcr_id", TypeCode.Int32, reqs[i]);
sds3.SelectParameters["@mcr_id"].Direction = ParameterDirection.Input;fv = new DetailsView();

fv.DataSource = sds3;
fv.DataBind();
Its on this last line that I keep getting the following error:
'PayWeb_getMCRApprProcView' expects parameter '@mcr_id', which was not supplied
Any suggestions are greatly appreciated.
Thanks

View Replies !

SqlDataSource With Stored Procedure
Hi All,
I am using SQL Server 2000. I create a Stored Procedure(SP) with some Parameters.
I used the SqlDataSource1 to link this SP and set the Parameters (Control Parameter) & display the result in GridView.
When I click the Submit or OK button, the SP doesn't get the parameters value. So the GridView returns 0 records.
See the code below.
<asp:GridView ID="GridView1" runat="server" Visible="False" Width="100%" AllowPaging="True" DataSourceID="SqlDataSource2" EmptyDataText="No Records Found." PageSize="100">
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:nfmseConnectionString %>"
SelectCommand="ldc_nncc_sp" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="ddlSwitch" Name="switch" PropertyName="SelectedValue"
Type="String" />
<asp:ControlParameter ControlID="txtCaller" Name="calling"
PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="txtCalled" Name="called"
PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="txtSDate" Name="sdate"
PropertyName="Text" Type="String" />
<asp:ControlParameter ControlID="txtEDate" Name="edate"
PropertyName="Text" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
ThanX in advance for your adivce.

Regards
~FAAS

View Replies !

Sqldatasource And Stored Procedure
hi
using sqldatasource how can i read the return value from a storedprocedure
thanks alot for help

View Replies !

SqlDataSource - Stored Procedure
Hi,
I have an SqldataSource which calls a SP. that SP returns two datatables.
If I bind my SqlDataSource to a Gridview, it shows the first DataTable,
which is logical.
How can I retrieve the next Datatable?

I would like the results of DataTable1 to be shown in the Header of my Grid,
and DataTable2 in the Rows...

Can anybody give a direction?
thx

View Replies !

Stored Procedure Parameters In SQLDataSource
I want to know how to set parameters for Update Stored Procedure in SQLDataSource

View Replies !

SQLDataSource, Stored Procedure, DetailsView
For some reason I can't make the stars align. Could someone spot the problem here? I'm looking to select the Identity of my last inserted record in the code behind my DetailsView. Here are the relavent bits:
Stored Procedure:ALTER PROCEDURE usp_EW_INSERTMajor
@StartDate datetime, @Finishdate datetime, @ProjectName nvarchar(1000), @WorkCell nvarchar(1000),
@JobName nvarchar(1000), @PartName nvarchar(1000), @StatusID int, @ResponsibleID int, @FacilityID int

AS
Set nocount on

DECLARE @ProjectID int
/*This saves the bits to the Project table*/
INSERT INTO EW_Project (ProjectTypeID,FacilityID,StartDate,FinishDate,Status,EmployeeID)
VALUES(1,@FacilityID,@StartDate,@FinishDate,@StatusID,@ResponsibleID)

/*This saves the bits to the Major table*/

SET @ProjectID = SCOPE_IDENTITY()
INSERT INTO EW_MajorBasic(ProjectID,ProjectName,WorkCell,JobName,PartName)
VALUES (@ProjectID,@Projectname,@WorkCell,@JobName,@PartName)

Set nocount off

SELECT @ProjectID as ProjectID

SQLDataSource<asp:SqlDataSource ID="ProjectData" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
SelectCommand="usp_EW_GETMajorBasic"
SelectCommandType="StoredProcedure"
UpdateCommand="usp_EW_UPDATEMajorBasic"
InsertCommand="usp_EW_INSERTMajor"
InsertCommandType="StoredProcedure"
UpdateCommandType="StoredProcedure"
DeleteCommand="DELETE FROM EW_Project WHERE ProjectID = @ProjectID"
>
<UpdateParameters>
<asp:Parameter Name="ProjectID" Type="Int32" />
<asp:Parameter Name="StartDate" Type="DateTime" />
<asp:Parameter Name="Finishdate" Type="DateTime" />
<asp:Parameter Name="ProjectName" Type="String" />
<asp:Parameter Name="WorkCell" Type="String" />
<asp:Parameter Name="JobName" Type="String" />
<asp:Parameter Name="PartName" Type="String" />
<asp:Parameter Name="StatusID" Type="Int32" />
<asp:Parameter Name="ResponsibleID" Type="Int32" />
<asp:CookieParameter CookieName="EW_FacilityID" Name="FacilityID" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="StartDate" Type="DateTime" />
<asp:Parameter Name="Finishdate" Type="DateTime" />
<asp:Parameter Name="ProjectName" Type="String" />
<asp:Parameter Name="WorkCell" Type="String" />
<asp:Parameter Name="JobName" Type="String" />
<asp:Parameter Name="PartName" Type="String" />
<asp:Parameter Name="StatusID" Type="Int32" />
<asp:Parameter Name="ResponsibleID" Type="Int32" />
<asp:CookieParameter CookieName="EW_FacilityID" Name="FacilityID" />
</InsertParameters>
<SelectParameters>
<asp:Parameter Name="ProjectID" Type="Int32" />
</SelectParameters>
<DeleteParameters>
<asp:Parameter Name="ProjectID" />
</DeleteParameters>
</asp:SqlDataSource>

DetailsView<asp:DetailsView
ID="DetailsView1"
runat="server"
AutoGenerateRows="False"
DataKeyNames="ProjectID"
DataSourceID="ProjectData"
SkinID="SimpleDetailsView"
OnItemDeleted="ProjectData_Deleted"
OnItemInserted="DetailsView1_ItemInserted">

Code-Behind: Sub DetailsView1_ItemInserted(ByVal sender As Object, ByVal e As DetailsViewInsertedEventArgs) Handles DetailsView1.ItemInserted
Dim newID As Integer = e.Values("ProjectID")
testlabel.Text = newID
End Sub

To be clear, everything is working. When I come to this page with an ID, the records display fine (Select works). The Update and Delete work just fine. The Insert works fine too. It's just that the ItemInserted part does not want to grab the ProjectID. Specifically, testlabel displays a Zero.

View Replies !

SqlDataSource And Stored Procedure Not Getting Called
Im using a SqlDataSource control. Ive got my "selectcommand" set to the procedure name, the "selectcommandtype" set to "storedprocedure"What am i doing wrong ? Ive got a Sql 2005 trace window open and NO sql statements are coming through "ds" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>" SelectCommand="my_proc_name" SelectCommandType="StoredProcedure">

"txtF1" Name="param1" Type="String" />
"txtF2" Name="param2" Type="String" />
"" FormField="txtF3" Name="param3" Type="String" />
"" FormField="txtF4" Name="param4" Type="String" />

View Replies !

Sqldatasource And Stored Procedure Prob
I m using Sqldatasource Control to fill a gridview.I wrote a Stroed Procedure.and assign Controlparameter value of sqldatasource to Proc.
Whatever the value i assigned to controls the Gridview filled with all records,whereas it must filter record by Parameter Value.
Following the Proc and Grid view Code.

CREATE PROCEDURE GetAllUsers( @persontype varchar(100)="", @name varchar(100)="", @adddatetime datetime="", @activeaccount int =-1, @country varchar (20)="") ASdeclare @cond varchar(1000) ;
if @persontype<>""beginset @cond= @cond+"and persontype="+@persontypeend if @name<>""beginset @cond= @cond+"and (charindex("0'>+@name+",x_firstname)>0 or charindex("0'>+@name+",x_lastname)>0 or charindex("0'>+@name+",x_email)>0) "end if @activeaccount<>-1beginset @cond= @cond+'and activeaccount='+@activeaccountend if @adddatetime<>""beginset @cond= @cond+'and adddatetime='+@adddatetimeend if @country<>""beginset @cond= @cond+'and x_country='+@countryendprint @cond exec( " select * from users where 1=1 "+@cond)GO

<asp:GridView ID="grdusers" runat="server" AllowPaging="True" AutoGenerateColumns="False" Width="780px" DataKeyNames="userID" CellPadding="4" CssClass="header" ForeColor="#333333" GridLines="None" allowsorting="false" DataSourceID="sqldatasource1">
<Columns>
<asp:boundfield
HeaderText="FirstName" datafield="x_firstname" sortexpression="x_firstname"/>

<asp:boundField DataField ="x_lastName" HeaderText="Lastname" sortexpression="x_lastname"/>

<asp:boundField DataField ="x_Address" HeaderText="Address" sortexpression="x_address"/>

<asp:boundField DataField ="x_country" HeaderText="Country" sortexpression="x_country"/>
<asp:boundField DataField ="Activeaccount" HeaderText="Active" sortexpression="activeaccount"/>

<asp:HyperLinkField DataNavigateUrlFields ="userID" HeaderText="Update" DataNavigateUrlFormatString="userdetail.aspx?id={0}" Text="Update" />
<asp:TemplateField HeaderText="Delete">
<ItemTemplate>
<asp:CheckBox ID="Chkdelete" runat=server />
</ItemTemplate>
</asp:TemplateField>

<asp:boundField DataField ="adddatetime" HeaderText="Creation Date" sortexpression="adddatetime"/>

</Columns>
<FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" />
<RowStyle BackColor="#F7F6F3" ForeColor="#333333" />
<EditRowStyle BackColor="#999999" />
<SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" />
<PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" ForeColor="#284775" />
</asp:GridView>
<asp:Label ID="lblmsg" runat="server" Width="770px" CssClass="errormsg"></asp:Label>
</td>
</tr>
<tr>
<td align="right" runat=server id="AllBtnCell" >
<pnwc:ExportButton ID="btnExcel" runat="server" CssClass="btncls" Text="Export to Excel" ExportType="Excel" FileNameToExport="ExportData.xls" Separator="TAB" OnClick="btnExcel_Click" />
<asp:Button ID="btnaddnew" runat="server" Text="Add New User" OnClick="btnaddnew_Click" CssClass="btncls" />
<asp:Button ID="Button1" runat="server" Text="Delete Selected" OnClick="Button1_Click" OnClientClick="return confirm('Are you sure want to delete selected users');" CssClass="btncls" /> 
</td>
</tr>
</table>
 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:VROAConnectionString %>"
SelectCommand="GetAllUsers" SelectCommandType="StoredProcedure" CancelSelectOnNullParameter=False >
<SelectParameters>
<asp:ControlParameter ControlID="txtname" PropertyName="text" Name="name" ConvertEmptyStringToNull="False" Size="200" Type="String" />
<asp:ControlParameter ControlID="lsttype" PropertyName="selectedvalue" Name="activeaccount" ConvertEmptyStringToNull="False" Size="1" Type="Int16" />
<asp:ControlParameter ControlID="lstutype" PropertyName="selectedvalue" Name="persontype" ConvertEmptyStringToNull="False" Size="20" Type="String" />
<asp:ControlParameter ControlID="txtdate" PropertyName="text" Name="adddatetime" ConvertEmptyStringToNull="False" Size="15" />
<asp:ControlParameter ControlID="lstcountry" PropertyName="selectedvalue" Name="country" ConvertEmptyStringToNull="False" Size="200" Type="String" />
</SelectParameters>

</asp:SqlDataSource>
I have tried so many things but nothing helped me.

View Replies !