TSQL Stored Procedure - Get Count Where....
I have the following for sql server 2000...
Select b.courseName, a.courseId, count(a.courseId) as [count],
avg(convert(INT, a.fldScore)) as [average],
count(fldPass) as [passed], count(fldPass) as [failed]
From tblTest a
inner join tblTest2 b on a.courseId = b.courseId
Group by a.courseId, b.courseName
Problem is the [passed] and [failed]
As it is, it's counting all of them.
I need to adjust it so passed will only read where fldPass = 'yes'
and fldPass = 'no' for the passed and failed.
Suggestions?
Thanks,
Zath
View Complete Forum Thread with Replies
Related Forum Messages:
Help With TSQL Stored Procedure - Error-Exec Point-Procedure Code
I am building a stored procedure that changes based on the data that is available to the query. See below. The query fails on line 24, I have the line highlighted like this. Can anyone point out any problems with the sql? ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the error... Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24 Error converting data type varchar to numeric. ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the exec point... EXEC [dbo].[sp_SearchCandidatesAdvanced] @LicenseType = 4, @PositionType = 4, @BeginAvailableDate = '10/10/2006', @EndAvailableDate = '10/31/2007', @EmployerLatitude = 29.346675, @EmployerLongitude = -89.42251, @Radius = 50 GO ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the STORED PROCEDURE... set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced] @LicenseType int = 0, @PositionType int = 0, @BeginAvailableDate DATETIME = NULL, @EndAvailableDate DATETIME = NULL, @EmployerLatitude DECIMAL(10, 6), @EmployerLongitude DECIMAL(10, 6), @Radius INT AS SET NOCOUNT ON DECLARE @v_SQL NVARCHAR(2000) DECLARE @v_RadiusMath NVARCHAR(1000) DECLARE @earthRadius DECIMAL(10, 6) SET @earthRadius = 3963.191 -- SET @EmployerLatitude = 29.346675 -- SET @EmployerLongitude = -89.42251 -- SET @radius = 50 SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' + 'Round(' + @v_RadiusMath + ', 0) AS Distance ' + 'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' + 'WHERE ' + @v_RadiusMath + ' <= ' + @Radius IF @LicenseType <> 0 BEGIN SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType END IF @PositionType <> 0 BEGIN SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType END IF LEN(@BeginAvailableDate) > 0 BEGIN SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate END --SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance' PRINT(@v_SQL) EXEC(@v_SQL) -----------------------------------------------------------------------------------------------------------------
View Replies !
TSQL - Stored Procedure
I have an insert stored procedure which creates a customer. The customer has a ID which is an autonumber within the SQL server table. I want to output this value to use this to update another table. How do I output a value of an insert query which i am not passing in as it's an autonumber ?? I am sure someone has come accross this before. Is it a trigger solution ?? Any ideas very welcome. mark
View Replies !
How To Execute A Url In Tsql Stored Procedure
Can i execute a URL in tsql stored procedure. Waht i want's is to hit a url on some event. I know i can do it in CLR stored procedure but for that i have to deploy assembly on the server which i want's to avoid. Is there any way i can hit a url from tsql stored procedure Kamran Shahid Sr. Software Engineer(MCSD.Net) www.netprosys.com
View Replies !
Walking Up The Tree In Tsql Or Stored Procedure
Well I have a two tables lets say they look like as follows: Table A CompanyID Location TableB CompanyID CompanyName Date The CompanyID column has values that look like this: AAA OR AAA.BBB OR AAA.BBB.CCC OR AAA.BBB.CCC.DDD OR AAA.BBB.CCC.DDD.EEE OR AAA.BBB.CCC.DDD.EEE.FFF each line representing the level of the company. we can see that CompanyID column exists in both tables. and I would like to find out the CompanyName from table B for each companyID that exists in Table A. but the tricky part is that for a specific CompanyID in tableA I might not have a exact match. e.g. in A lets say I have AAA.BBB.CCC.DDD.EEE for CompanyID but in table B i might not have AAA.BBB.CCC.DDD.EEE but instead have AAA.BBB or AAA.BBB.CCC or AAA. so I have to walk up the tree or these levels to look for a match an get the companyName. the match logic is as such. If in table A companyID = AAA.BBB.CCC.DDD.EEE then look for same value in B if NOT FOUND then remove the last level from the companyID value from Table A. so new value of CompanyID = AAA.BBB.CCC.DDD Now look for this new value AAA.BBB.CCC.DDD in table B. IF NOT FOUND then remove another level from ComapnyID in table A so new companyID = AAA.BBB.CCC and look for AAA.BBB.CCC in table B. just going up the tree by chopping off a level till I find a match. now the question is how to do this in TSQL.... can someone help? So what I really want to do is to look for a match between A and B based on companyID.
View Replies !
Sql Count Using Stored Procedure Withing Stored Procedure
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
View Replies !
Execution Time Gap Between Simple Tsql And Stored Procedure In SQl Server 2005
Hi , I ma using sql server 2005.I have a bunch of statements of sql and i have created a stored procedure for those. When i execute i found that there is lot's of difference between execution time of stored procedure and direct sql in query windows. can anyone help me to optimize the execution time for stored prcedure even stored prcedure is very simple. I have used sql server 2000 and i am new in sql server 2005.
View Replies !
How Can I Use COUNT In My Stored Procedure?
hello, i have a list of Categories and each one contains a list of SubCategories, and i use a nested Repeater to show each Category with their SubCategories, but because are to many to show verticaly, i want to make 2 nested repeaters and in the first one to show only the first "n" Categories with their SubCategories and in the second Repeater should be the last n Categories, and like so they will be in 2 colums How can i use the COUNT function in my stored procedure to take only first n Categories? I used SELECT * FROM Categories WHERE CategoryID <= 5 but i don't want to order by the primary key i want to order by a COUNT or something like this... here is my stored procedure (i use it for two nested Repeaters)ALTER PROCEDURE SubCategoriiInCategorii CategoryID int) AS SELECT CategoryID, Name, Description FROM Categories WHERE CategoryID = @CategoryIDORDER BY Name SELECT p.SubCategoryID, p.Name,p.CategoryID FROM SubCategorii p ORDER BY p.Name i hope you understand what i mean, thank you
View Replies !
Using Count(*) In A Stored Procedure
Hi, I would like to add custom paging to my ASP.Net pages. How can I use Count(*) in a query such as below to retrieve a record count? set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGO ALTER PROCEDURE [dbo].[view_icon_photos] @Filenumber int = '0' , @Location nvarchar(50)= '-1' , @Rubric nvarchar(MAX)= '-1' , @Author nvarchar(75)= '-1' , @startRowIndex int= '-1' , @maximumRows int= '0' As IF @Filenumber = '0' AND @location > '-1' AND @Rubric = '-1' AND @Author = '-1' AND @startRowIndex > '-1' AND @maximumRows >'0'Select Icon, Filenumber, RowRankFrom(Select Icon, Filenumber, Row_Number () Over ( Order By Filenumber ASC ) AS RowRankFrom dbo.photosWhere Location = @Location)As IconRank Where RowRank > @startRowIndex AND RowRank <= (@startRowIndex + @maximumRows)
View Replies !
Using Two COUNT(*) In A Stored Procedure
what's wrong with the following code? COUNT for completed and exempted doesn't return correct values. they return same values. but when i remove one count it's returning right COUNT. i need to return the COUNT from two tables with a single query. how can i accomplish that??? is there anything wrong with my code below? <code> CREATE PROCEDURE dbo.Test AsSELECT s.StudentIdNum, c.[Name], COUNT(*) AS Completed, COUNT(*) AS exempted FROM StudentEnrolled AS s JOIN StudentCourse AS sc ON s.StudentKey = sc.StudentKey JOIN Courses AS c ON sc.CourseID = c.CourseIDLEFT JOIN ModuleEnrolment AS m ON sc.StudentCourseID = m.StudentCourseIDLEFT JOIN ModuleExemption AS e ON sc.StudentCourseID = e.StudentCourseIDWHERE m.Status = "Completed"GROUP BY s.StudentIdNum, c.[Name] </code>
View Replies !
Dynamic Sql For Count In Stored Procedure
Hi all, I'm using sql 2005. Can some one please tell me how to write dynamic sql for count. What i want is that i want to count the number of employees existing for the given department names and get the counted values as output into my vb.net 2.0 project. If any one know who to write this please send the code.. Please help me.. I want the below code to change to dynamic sql: Alter proc GetCountforemp @DestName varchar(200)=null, @total int output as begin SELECT @total = Count(distinct Employee.EmployeeID) FROM Employee INNER JOIN Dest R on R.DestID=Employee.DestID WHERE R.DestName in ('''+@DestName+''') end
View Replies !
Stored Procedure - Return Count
Having a little trouble with this sp... just need to return the count.....CREATE PROCEDURE dbo.getTotalObjectives @courseId VARCHAR(20) ASBEGIN DECLARE @errCode INT SELECT count(*) FROM objstructure WHERE courseId = @courseId SET @errCode = 0 RETURN @errCode Can only return one thing, @errCode, but can return others in the select statement....I did it before like.....SELECT @lessonLocation = lessonLocation FROM cmiDataModel WHERE studentId = @studentIdand got the lessonLocationAnd, in code behind, I know this may be off as well....sObjNum = command.Parameters[ "@courseId" ].Value.ToString();The @courseId should be the count????Thanks all,Zath
View Replies !
Stored Procedure For Each ProductID Count
Would like to get a total count from Quantity Column for (Each individual ProductID # entered) from the ProductID Column. And insert (the New total Value count into the QtySold Column. Does anyone have an idea how to write a stored Procedure for this? The tables name is OrderItems which contains the following columns: uid, OrderID, ProductID, Quantity, QtySold, ProductName, Price, Many Thanks
View Replies !
Column Count From Stored Procedure
I am trying to determine the number of columns that are returned froma stored procedure using TSQL. I have a situation where users will becreating their own procedures of which I need to call and place thoseresults in a temp table. I will not be able to modify those usersprocedures. I figure if I have the number of columns I can dynamicallycreate a temp table with the same number of columns, at which point Ican then perform an INSERT INTO #TempTableCreatedDynamically EXEC@UserProcCalled. With that said, does anyone have any idea how todetermine the number of rows that an SP will return in TSQL?Thanks!
View Replies !
SQL Problem Involving Count(*) In Stored Procedure
I seem to have a little problem with my SQL. I'm attempting to use a an .NET grid-view to page a list of search results using an ObjectDataSource (ODS). It's a very simple search setup. The ODS retrieves the Search keyword from the query-string sending it to the BLL's GetResult method which then utilises the DAL's version and retrieves the result. Not all of them of course because I'm paging so it only retrieves the first page (Lets say the first 10 items). This part of the SQL works fine as the same SQL method is used else where on the site and it's well tested. But to to use the Paging function I'm using the SelectCountMethod attribute of the ODS. Again this gets the Search term from the QueryString and sends it too the BLL which retrieves the information from the DAL. Now this is where it starts playing up. The Sql count method is as follows and is run as a Stored Procedure: 1 ALTER PROCEDURE dbo.StoreName_Store_GetProductSearchCount 2 ( 3 @SearchQuery nvarchar 4 ) 5 AS 6 SET NOCOUNT ON 7 8 SELECT COUNT(*) 9 FROM StoreName_Products 10 WHERE Title LIKE '%' + @SearchQuery + '%' Nice and Easy. Not a Problem... Isn't it? When I run this query by selecting the database in the Server Explorer in VS2005 and running a 'New Query', it retrieves the correct results. (I only run this query from the Start of the SELECT Query in this mode, don't add the stuff above it)When I run this query through the website as intended and retrieves the int from the Stored Procedure, it always returns the entire count of the number of products in the table.At first I thought It might be a simple error with my caching system. Nope, it's not as after I purged it, it still returns the same value. I thought, well maybe just maybe the BLL or the DAL are some point converting it to this number but I'm quite sure it wasn't... and nope it wasn't that either because the ExecuteScalar method was found to be returning this number. So I ran the Stored Procedure by opening it up and simply right clicking the SQL Query and Executing it adding a value for @SearchQuery when it requested. Bingo. It's returning the full number of the products.So my question is... What's the deal? How can the same query return two completely different results? and most of all... How do I overcome this? Is this because it's in a stored procedure and I should be executing it as a SqlCommand from my DAL? I'm a bit confused. Is there a problem running this sort of query in a stored procedure that I don't know about and probably really should?Thankful for any answers,Regards,Luke
View Replies !
Calling A Stored Procedure Which Uses A Return @count
Hi again, and so soon...Having just solved my previous issue, I am now trying to call this stored proc from my page.aspx.vb code. Firstly the stored proc looks like this:----------- ALTER PROCEDURE dbo.CountTEstAS SET NOCOUNT ON DECLARE @sql nvarchar(100); DECLARE @recCount int; DECLARE @parms nvarchar(100); SET @sql = 'SELECT @recCount1 = COUNT(*) FROM Pool 'SET @parms = '@recCount1 int OUTPUT' exec sp_executesql @sql, @parms, @recCount1 = @recCount OUTPUTRETURN @recCount -------------When tested from the stored proc, the result is: @RETURN_VALUE = 4 My code that calls this stored proc is: Dim connect As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") connect.Open() Dim cmd As New SqlCommand("CountTEst", connect) cmd.CommandType = CommandType.StoredProcedure Dim MyCount As Int32 MyCount = cmd.ExecuteScalar connect.Close() So I expext MyCount = 4 but this code returns MyCount = 0 With the RETURN statement in the stored proc, and then calling it via MyCount = cmd.ExecuteScalar, I didn't think I need to explicitly define any other parameters. Any help please. thanks,
View Replies !
Count Records When RecordSource Is A Stored Procedure
I have a stored procedure named mySP that looks basically like this:Select Field1, Field2From tblMyTableWhere Field 3 = 'xyz'What I do is to populate an Access form:DoCmd.Openform "frmMyFormName"Forms!myFormName.RecordSource = "mySP"What I want to do in VBA is to open frmContinuous(a datasheet form) ifmySP returns more than one record or open frmDetail if mySP returnsonly one record.I'm stumped as to how to accomplish this, without running mySP twice:once to count it and once to use it as a recordsource.Thanks,lq
View Replies !
Running Total Count In Stored Procedure
in my procedure, I want to count the number of rows that have erroredduring an insert statement - each row is evaluated using a cursor, soI am processing one row at a time for the insert. My total count tobe displayed is inside the cursor, but after the last fetch is called.Wouldn't this display the last count? The problem is that the count isalways 1. Can anyone help?here is my code,.... cursor fetchbegin ... cursorif error then:beginINSERT INTO US_ACCT_ERRORS(ERROR_NUMBER, ERROR_DESC, cUSTOMERNUMBER,CUSTOMERNAME, ADDRESS1, ADDRESS2, CITY,STATE, POSTALCODE, CONTACT, PHONE, SALESREPCODE,PRICELEVEL, TERMSCODE, DISCPERCENT, TAXCODE,USERCOMMENT, CURRENCY, EMAILADDRESS, CUSTOMERGROUP,CUSTINDICATOR, DT_LOADED)VALUES(@ERRORNUM, @ERRORDESC,@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY,@STATE, @POSTALCODE, @CONTACT, @PHONE, @SALESREPCODE,@PRICELEVEL, @TERMSCODE, @DISCPERCENT, @TAXCODE,@USERCOMMENT, @CURRENCY, @EMAILADDRESS, @CUSTOMERGROUP,@CUSTINDICATOR, @DTLOADED)SET @ERRORCNT = @ERRORCNT + 1END --error--FETCH NEXT FROM CERNO_US INTO@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY, @STATE,@POSTALCODE, @CONTACT,@PHONE,@SALESREPCODE, @PRICELEVEL,@TERMSCODE,@DISCPERCENT, @TAXCODE, @USERCOMMENT, @CURRENCY,@EMAILADDRESS,@CUSTOMERGROUP, @CUSTINDICATOR, @DTLOADED--IF @ERRORCNT > 0INSERT INTO PROCEDURE_RESULTS(PROCEDURE_NAME, TABLE_NAME, ROW_COUNT,STATUS)VALUES('LOAD_ACCOUNTS', 'LOAD_ERNO_US_ACCT', @ERRORCNT, 'FAILEDINSERT/UPDATE')END -- cursorCLOSE CERNO_USDEALLOCATE CERNO_US
View Replies !
Retrieve Count From Stored Procedure And Display In Datagrid.
Hi Guys, I have a sql procedure that returns the following result when I execute it in query builder: CountE ProjStatus 6 In Progress 3 Complete 4 On Hold The stored procedure is as follow: SELECT COUNT(*) AS countE, ProjStatusFROM PROJ_ProjectsGROUP BY ProjStatus This is the result I want but when I try to output the result on my asp.net page I get the following error: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.Source Error: Line 271: </asp:TemplateColumn> Line 272: <asp:TemplateColumn> Line 273: <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate> Line 274: </asp:TemplateColumn> Line 275: </columns> My asp.net page is as follows: <script runat="server"> Dim myCommandPS As New SqlCommand("PROJ_GetProjStatus") ' Mark the Command as a SPROC myCommandPS.CommandType = CommandType.StoredProcedure Dim num as integer num = CInt(myCommand.ExecuteScalar) 'Set the datagrid's datasource to the DataSet and databind Dim myAdapterPS As New SqlDataAdapter(myCommandPS) Dim dsPS As New DataSet() myAdapter.Fill(dsPS) dgProjSumm.DataSource = dsPS dgProjSumm.DataBind() myConnection.Close() </script> <asp:datagrid id="dgProjSumm" runat="server" BorderWidth="0" Cellpadding="4" Cellspacing="0" Width="100%" Font-Names="Verdana,Arial,Helvetica; font-size: xx-small" Font-Size="xx-small" AutoGenerateColumns="false"> <columns> <asp:TemplateColumn HeaderText="Project Summary" HeaderStyle-Font-Bold="true" > <itemtemplate> <%# BgColor(DataBinder.Eval(Container.DataItem, "ProjStatus" ))%> </itemtemplate> </asp:TemplateColumn> <asp:TemplateColumn> <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate> </asp:TemplateColumn> </columns> </asp:DataGrid> Please help if you can Im havin real trouble here. Cheers
View Replies !
Stored Procedure To Count Matching Words Between Two Strings
hi all, I want to know that how can i write a stored procedure that takes an input param, i.e., a string and returns the count of the matching words between the input parameter and the value of a column in a table. e.g. I have a table Person with a column address. now my stored procedure matches and counts the number of words that are common between the address of the person and the input param string. I am looking forward for any help in this matter. I am using Sql server 2005.
View Replies !
Locks Count And Importing PL/SQL To TSQL
Hi everyone. I have 3 questions. 1. How do you count the number of locked row in a table when you do a select statement? 2. Is there any software out there that imports PL/SQL to TSQL? We have ALOT to import and not enough ressource to do it manually. 3. What do you guys/girls recommended for a book in TSQL? Thank you! Sebs 613-951-2398 sauljea@statcan.ca Bonjour tout le monde. J'ai 3 petites question. 1. Comment peut-on compter le nombre d'enregistrements "Lock" dans une table lors d'un select statement? 2. Existe-t-il un logiciel qui importe des procédures PL/SQL à TSQL? 3. Qu'es-ce que vous recommendez comme livre pour la programmation en TSQL? Merci! Sebs 613-951-2398 sauljea@statcan.ca
View Replies !
TSQL: I Want To Use A SELECT Statement With COUNT(*) AS 'name' And ORDER BY 'name'
I am very new to Transact-SQL programming and don't have a programmingbackground and was hoping that someone could point me in the rightdirection. I have a SELECT statement SELECT FIXID, COUNT(*) AS IOIsand want to ORDER BY 'IOI's'. I have been combing through the BOL, butI don't even know what topic/heading this would fall under.USE INDIISELECT FIXID, COUNT(*) AS IOIsFROM[dbo].[IOI_2005_03_03]GROUP BY FIXIDORDER BY FIXIDI know that it is a simple question, but perhaps someone could assistme.Thanks,
View Replies !
TSQL Strored Procedure
I am having an issue when trying to pull data from Oracle into a sqlSERVER TABLE. I'm running into an issue because I am using to much temporary space in Oracle because the return set is so large. New to sqlserver, but in Oracle the solution would be to commmit the insert after so many records have been retrieved. Here's the procedure I wrote I would think I need to add a cursor and a counter which be used to do a commit after so many rows have been retrieved. DOes so one have a procedure I could model mine after? ALTER PROCEDURE [dbo].[SP_Load_BO] -- Add the parameters for the stored procedure here @p1 int = 0, @p2 int = 0 AS BEGIN SET NOCOUNT ON; INSERT INTO MERCHANT_BACKOFFICE_SQLSERVER (MONTHYEAR,ALLIANCEID, merchantid,rptservid,scid,tabletype,tablenum,VOLUME, COST, COSTPLUS,DATELOAD) SELECT convert(DATETIME,PERIOD) as PERIOD, ALLIANCEID, merchantid, rpTSERVID, scid, tabletype, tablenum, Convert(numeric(10),Count) AS VOLUME, Convert(numeric(24,6),COST) as COST, Convert(numeric(24,6),COSTPLUS) as COSTPLUS, convert(datetime,DATE_LOAD) as DATE_LOAD from OPENQUERY(INV,' SELECT MER.MONTHYEAR AS PERIOD, MER.ALLIANCEID, MER.merchantid, MER.RPTSERVID, MER.SCID, MER.TABLETYPE, MER.TABLENUM, SUM(MER.VOLUME) AS Count, SUM(MER.COST) as Cost, SUM(MER.COSTPLUS) as Costplus, to_char((last_day(add_months(sysdate,-1))+1),''MM/DD/YYYY'') as DATE_LOAD FROM MERCHANT_BACKOFFICE_SERVICE MER WHERE MER.allianceid <>516 group by MER.MONTHYEAR, MER.ALLIANCEID, MER.merchantid, MER.RPTSERVID, MER.SCID, MER.TABLETYPE, MER.TABLENUM') END
View Replies !
TSQL Or Procedure To Compute According To Previous Data
I have three coloumn in Salary Table Emp ID, Emp Salary , Sequence a1 1000 1 a1 2000 2 a1 2000 3 a2 4000 1 a2 5000 2 a2 5000 3 a2 6000 4 Now I have to calculate the count on salary if the previous salary is different then count +1 else is previous salary same then add +0. so output be EmpID and Updation in Salary a1 = 2 and for a2 =3 Can anyone help me with the query or storeprocedure i can achieve this output counting according to previous data.
View Replies !
Calling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?
Hi all, I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE): (1) /////--spTopSixAnalytes.sql--/// USE ssmsExpressDB GO CREATE Procedure [dbo].[spTopSixAnalytes] AS SET ROWCOUNT 6 SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName FROM LabTests ORDER BY LabTests.Result DESC GO (2) /////--spTopSixAnalytesEXEC.sql--////////////// USE ssmsExpressDB GO EXEC spTopSixAnalytes GO I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--/////////// Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;") Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection) sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure 'Pass the name of the DataSet through the overloaded contructor 'of the DataSet class. Dim dataSet As DataSet ("ssmsExpressDB") sqlConnection.Open() sqlDataAdapter.Fill(DataSet) sqlConnection.Close() End Sub End Class /////////////////////////////////////////////////////////////////////////////////////////// I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1) Please help and advise. Thanks in advance, Scott Chang More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View Replies !
Debugging TSQL Stored Procedures
Running SQL Server Express is there a way to debug TSQL stored procedures? I also have Visual Studio .NET 2003, can I use it to debug the TSQL stored procedures? Thanks in advance, Mark
View Replies !
How Can I Store A Stored Procedure Name For A Report In A Table And Link It To A Dataset As A Stored Procedure?
Hi! I have about 100 SSRS 2005 reports, each of which links to a stored procedure. Each stored procedure may have two, three or even four parameters, so they vary a bit. I now also have a table called ReportInfo that stores the displayable report names, the rdl file names and some additional information that displays on the header of each report. I'd like to be able to store the name of the stored procedure in that table as well and just tell the dataset to execute that stored procedure, but it isn't working the way I expected. There are two datasets with each report. The first dataset points to the ReportInfo table, where all the standard information about the report is located, including now the name of the stored procecdure to which the second dataset is supposed to link. I'm not able to point the name of the stored procedure to a field in another dataset. I can't say, for example =First(Fields!StoredProcedure.Value, "ds_ReportInfo") That gives an error I then tried setting the dataset type to Text, creating a ReportParameter called StoredProcedure (which was filled in from the first query) and then tried: Exec (@StoredProcedure) In a way, that kind of worked. I got an error message back telling me the stored procedure needed a startdate and endingdate, which are the two parameters for this parrticular stored procedure. I just don't want to have to code that into the text query. Anyway, it wasn't my intention to have to use a text-based data query. It's as much of a hassle to use the drop-down to pick stored procedure names as it is to create a long text string with two or three parameters. I just want to dynamically control the name of the stored procedure and have it act exactly as it does when I select a stored procedure from a drop down. That is, I want to be able to tell Reporting Services where to find the name of the Stored Procedure for the dataset and then see all the fields it would return and be prompted for the two, three or four parameters exactly the same way I am when I select a stored procedure from a dropdown. The reason I ask this is that we've changed the naming convention for the stored procedures for reports, and now I'm having to go back into every report and reselect the new stored procedure name. I'd really much rather have the names in a database (in case they decide to change them again) and then just have the report pull the stored procedure name from the table. But I'm not finding an easy way to do that. I wouldn't mind putting a little piece of code in each report to do this if necessary, but what I don't want to do is have every report be different. That's the problem with using the EXECUTE statement in a text-based query. Each query has to be different based on the number and content of the parameters, and I don't want that. I just want to tell Reporting Services where to find the name of the stored procedure for the dataset and then have it treated like any other stored procedure. Any suggestions? Is anyone else trying to do this? Thanks Karen
View Replies !
Best Way To Compile Thousands Of TSQL Stored Procedures?
I have a custom application that on occasion requires thousands of TSQLfiles (on the file system) to be compiled to the database.What is the quickest way to accomplish this?We currently have a small vbs script that gets a list of all the files,the loops around a call to "osql". each call to osql opens/closes aconnection to the destination database (currently across the network).
View Replies !
Calling A Stored Procedure Inside Another Stored Procedure (or &"nested Stored Procedures&")
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View Replies !
Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View Replies !
System Stored Procedure Call From Within My Database Stored Procedure
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense. How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how? Thanks in advance
View Replies !
Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio What could explain this? Obviously, All three scenarios are executed against the same database and hit the exact same tables and indices. Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000). The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
View Replies !
Returning Row Count Via A Procedure
Hi I have written a stored procedure that accepts an argument which is the name of the table and the procedure returns me the number of rows in that table. It shows me the correct result but doesnt allow me to store the result in a variable. Here is the code create procedure getRowCount @v_table_name NVARCHAR(MAX) as DECLARE @v_exec_query NVARCHAR(MAX), @v_count BIGINT begin set @v_exec_query =(select 'select count(*) from ' + @v_table_name ); exec (@v_exec_query) end go The above procedure is working fine. But i want to store the result in the @v_count variable. How can i do that? Thanks and regards Salil
View Replies !
User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net
Hi all, I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server. Whenever I tried to right click stored procedure and select step into store procedure> i get following error "User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information" I am not sure what needs to be done on sql server side We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master. Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean? Please advise.. Thank You
View Replies !
Transaction Count After EXECUTE Indicates That A COMMIT Or ROLLBACK TRANSACTION Statement Is Missing. Previous Count = 1, Current Count = 0.
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False 'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i ' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
View Replies !
SQL Stored Procedure Issue - Search Stored Procedure
This is the Stored Procedure below -> SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO /****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO /****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/ /****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/ CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT) AS DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000) IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID. Please help me regarding the same. Thanks in advance. Sandeep Kumar
View Replies !
Use Resultset Returned From A Stored Procedure In Another Stored Procedure
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
View Replies !
Calling Stored Procedure Fromanother Stored Procedure
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View Replies !
Exec Twp Stored Procedure In A Main Stored Procedure
Hi there i have a stored procedure like this: CREATE PROCEDURE SP_Main AS SET NOCOUNT ON BEGIN TRANSACTION exec SP_Sub_One output exec SP_Sub_Two output IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran return GO now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation. now i can put the "begin transation" in the two sub stored procedure's. The problem is what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two" now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it. Thanks in advance Mahmoud Manasrah
View Replies !
Execute Stored Procedure From Stored Procedure With Parameters
Hello, I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first? The Stored Procs are: CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency @CID int, @CY char(3) AS SELECT Distinct S.BalancePoolName FROM SiteRef S INNER JOIN Account A ON A.PoolId=S.ID Inner JOIN AccountBalance AB ON A.Id = AB.AccountId Inner JOIN AccountPool AP On AP.Id=A.PoolId Where A.CompanyId=@CID And AB.Currency=@CY CREATE PROCEDURE USP_BalanceDateByAccountPool @PoolName varchar(50) AS Declare @DT datetime Select @DT= (Select MAX(AccountBalance.DateX) From Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName) SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance FROM Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT Order By AccountBalance.DateX DESC Any assistance would be greatly appreciated. Thank you, Dave
View Replies !
Calling A Stored Procedure Or Function From Another Stored Procedure
Hello people, When I am trying to call a function I made from a stored procedure of my creation as well I am getting: Running [dbo].[DeleteSetByTime]. Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous. No rows affected. (0 row(s) returned) @RETURN_VALUE = Finished running [dbo].[DeleteSetByTime]. This is my function: ALTER FUNCTION dbo.TTLValue ( ) RETURNS TABLE AS RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true' This is my stored procedure: ALTER PROCEDURE dbo.DeleteSetByTime AS BEGIN SET NOCOUNT ON DECLARE @TTL int SET @TTL = dbo.TTLValue() DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime) END CreatedTime is a datetime column and TTL is an integer column. I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it. Your help is much appreciated.
View Replies !
Showing Records Where Count(*) Is Zero (in A Stored Proc)
This seems so easy....change the join to show all records, but thezero records still do not showI want to join 2 tables....basically Customers and Orders....get thetotal number of orders for each Customer within a date range...but Ican't seem to show records where the total for a particular Customeris zero (which is very important info)There must be an easy way???thanks,Paul
View Replies !
Stored Procedure In Database X, Executes Stored Procedure In Database Y, Wrapped In Transaction?
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View Replies !
|
TRACKER
