.dtsx Package From Informix Using ODBC

Mar 9, 2006



Help!

I'm trying to create a simple .dtsx package that imports data to SQL server 2005 from an informix 7.3 db using an ADO.net ODBC connection. I am first creating the groundwork for the dtsx package in SQL server using the wizard, and then editing the file later in visual studio.

My data source SQL in the dataflow task is simple and it works great until I hit a locked record on the Informix database.

select <coulmns>

from <table>

Where <condition>



The work around syntax for the locked row on the informix DB should be:

set isolation to dirty read

go

select <coulmns>

from <table>

where <condition>

This syntax will return the data correctly using a non-microsoft SQL editor, however it will will not parse corectly within visual studio. Interestingly enough, in visual studio I can parse the islolation and the select indenpendantly, just not in the same statement.

Has anyone come across this before? Any ideas on what I can do to resolve my problem?

Thanks in advance!

View 7 Replies


ADVERTISEMENT

DTSX Package Calling Another DTSX Package Question

Jun 13, 2007

I have a dtsx package that is calling another dtsx package, however, if the called upon dtsx package fails with errors or what not, then the calling package does not continue as well. Is there any way to override this such that if the called upon package fails, the downstream actions in that package can stop, but the calling packages downstream actions to continue?

View 3 Replies View Related

OLE DB / ODBC For Informix

Oct 16, 2001

Hey everyone,

I'm trying to hit an informix box... I've found two software packages (both priced in the THOUSANDS of dollars)... Looking for a cheap...er, a FREE way to hit this informix box via DTS.

Thank you!

View 1 Replies View Related

INFORMIX ODBC PROTOCOL

Dec 29, 2006

hi all,


Happy new year!

is anybody here familiar with the different informix ODBC protocol

such as Sesoctcp and onsoctcp and the rest of the protocols

I think my SSIS design is affected by this protocols i'm having problems with

the unicode and non unicode conversion.

many many thanks

Joey

View 10 Replies View Related

ODBC - OpenLink 5.2 Clent - Informix 2000

Jul 8, 2007

I'm having trouble using Informix 2000 database as a source. I have an OpenLink v 5.2 driver installed and a System DSN set up. I can successfully test the connection.

I added the ADO.Net DSN to the connection manager and added it to a DataReader Source. I then added the SQLCommand property. I was able to map columns (took a long time for the columns to show up) and then I get an error: "Function sequence error:". Can not save the DataReader.

View 2 Replies View Related

TSQL/ODBC Read Of Informix 9.3 Blob Field

Jan 15, 2004

I am trying to read an Informix 9.3 blob field into a TSQL (SQL Server Stored Procedure) and the data type conversion is not supported thru the MS ODBC Driver installed with Win2000/SQL2000. Does anyone know of another method to retrieve this data, or of a vendor that provides an ODBC driver that supports the Informix blob data type. Thanks!

View 1 Replies View Related

Queries Against Linked Server To Informix Via ODBC Errors

Oct 9, 2007

What can be the reason(s) why I can't get data from a linked server using an ODBC datasource that works fast & fine from MS Access?


I have an ODBC connection (System DSN) configured for an Informix ODBC driver.
The Test button (belonging to this driver-setup) reports a successfull connection test.
Getting data from this database by linking tables in MS Access works fast and easy.
But I have tried for many days now to setup a linked server from SQL Server (2005)
Creation goes fine, but as soon as I issue a query, (e.g. 'select * from infrem723...remotetable' or using 'openquery')
I get the following error:
---

Msg 7399, Level 16, State 1, Line 1

The OLE DB provider "MSDASQL" for linked server "infrem723" reported an error. The provider did not give any information about the error.

Msg 7303, Level 16, State 1, Line 1

Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "infrem723".

---

Why is Access able to read what "MSDASQL" cannot?
I am desperate - can anybody help?Thanks a lot!

View 8 Replies View Related

Transact SQL :: Way To Configure ODBC Driver For Informix DB To Connect / Work With SSMS?

Aug 18, 2015

Basically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix.  I am thinking linked server.  If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).

View 4 Replies View Related

Run A Dtsx Package In 32-bit

Dec 8, 2006

Hi!

I have a  SSIS-package with Excel Connection Manager that fails on our x64-platform with error:
Error: 2006-12-08 06:46:23.77
Code: 0xC0202009
Source: dpd2_philips Connection manager "Excel Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2006-12-08 06:46:23.77
Code: 0xC020801C
Source: Copy Data from Blad1$ to dpd2 dbo philips Task Excel Source [107]
Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error

It's works fine on my computer (x86) and if I start the package manually on the x64-server. But I noticed that it runs under 32bit (DTExecUI.exe *32 in taskmanager) when it's started manually.

Any idea? The server use dtexec.exe to start the packages. Maybe it runs under 64bit then? 

View 4 Replies View Related

The Never Ending DTSX Package

May 23, 2006

Hi Champs

I want to implement a rutine that watches for specific files in a specified folder.

I've found the WMI sample "File Watcher Task" for SSIS and it looks fine.

My question is now: how shall I run this package; shall I start it at let it run forever?

And also how do I monitor that the package is running?





Many thanks

Rogvi

View 2 Replies View Related

Dtsx Package Encryption

Oct 19, 2007

I understand that I can use dtutil to provide a password to encrypt the package. However, when I run the encrypted package, I need to provide the same password in order to run it. Is there a way that I can encrypt the package but allow anybody to run it without providing the password?
That is, I want the package to be encrypted so that nobody can load and modify the code in Visual Studio, but I want people to be able to execute it. Is there a way to do this? Similar to generating a exe file?

View 7 Replies View Related

Unable To Run .dtsx Package

Mar 28, 2007

Dear all,



SSIS package created from the wizard couldn't be run from the visual studio editor? The run button is disabled. Is it not possible to run from inside editor as well?



Many thanks,

milan

View 3 Replies View Related

Calling Dtsx Package Using Xp_cmdshell

Jan 17, 2008

am trying to execute a dtsx package using xp_cmdshell

when testing, this works fine

DECLARE @returncode int

EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouseDev.ETLLoadGroup_Daily.dtsx"'

PRINT @returncode

then change it to look at the live one

DECLARE @returncode int

EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouse.ETLLoadGroup_Daily.dtsx"'

PRINT @returncode


doesnt work - it tries to execute the WarehouseDev version

any ideas ??

n.b. didnt know if this should be in this forum or a t-sql forum - apologies if its in wrong place !!

View 4 Replies View Related

Can't Load SSIS Dtsx Package

Apr 4, 2007

hi there,

when i start SQL Server business intelligence developer and create new Integration Service project, i will see following error:



Error loading 'Package.dtsx' : Object reference not set to an instance of an object.. C:SairiMy DocumentsVisual Studio 2005ProjectsIntegration Services Project12Integration Services Project12Package.dtsx



this error occures just on my PC and i reinstalled VS2005 and SQL2005 again and unfotunately the problem existes.


please someone helps me (just don't tell me to format my PC!!!)



tnx

View 10 Replies View Related

Installing/Deploying A .dtsx Package

Sep 13, 2006

Hi,

I used to write DTS Scripts in SQL Server 2000 and schedule them as jobs with out problem.

This was normally done within SQL Server its self.

Now that I've moved to using SQL Server 2005 I've been learning how to use SSIS.

I've successfully developed a package and managed to create a .dtsx file. Now I have 2 large books on the subject of SSIS but none seem to go into any detail on what to do next.

So here€™s my newbie question (I apologise if I sound dumb!):

I don't want to run my package manually as the books keep telling me how to do.

I need to have my package added into SQL Server 2005 somehow and then schedule it as a reoccurring job.

Can anyone point me in the right direction?

Thanks

Matt.

View 3 Replies View Related

DTSX Package Fails On .CSV File

Dec 13, 2007

I am having trouble with a dtsx package to truncate a table, then insert the contents of a .csv file.
The package is being executed off the local filesystem, reading a csv on the same file system, and inserting into a remote SQL 2k5 server. If I run the package alone in BI it will run perfectly, if I implement the package into a console app in visual studio, it will trunc the table, but will not insert any of the data in the csv file. When running from DtExec I recieve the following error on the CSV portion after the table is truncated:



Code: 0xC00470FE
Soure: Data Flow Task DTS.Pipeline
Description: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for for componenet "Soure - My_File_CSV" (1).

I have tried all the work arounds I can find without any luck. All help will be appreciated.

View 4 Replies View Related

Error Loading Package.dtsx

Apr 9, 2008

I had encountered an error on SSIS its not allowing me to create any new packages. Below is the error message. Please do help be out.
This problem had occurred on my server machine

Error 1 Error loading Package.dtsx: Error loading value "<DTSroperty xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="CreationDate"
DTSataType="7">08.04.2008 4:39:55 PM</DTSroperty>" from node "DTSroperty".

c:documents and settingssrmohammedmy documentsvisual studio 2005projectsdictaphone_synchronizationdictaphone_synchronizationPackage.dtsx

View 3 Replies View Related

Copy Annotations Out Of Xml/ Dtsx Package

Jul 14, 2006

Is there a way to strip out the annotations from a dtsx package. I'm looking at quite a few and would like to automaticly pull those out and store them somewhere in either a table or a text file.

Is this possible or am I going to have to hand copy them out?

Thanks for the help
Saitham8

View 11 Replies View Related

DTSX Package Will Not Run From SQL Server Agent

Aug 13, 2007

When I try to run a DTSX package from SQL server agent, I get this error message:

Started: 3:59:42 PM Error: 2007-08-13 15:59:42.39 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSroperty" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-08-13 16:00:00.98 Code: 0xC001602A Source: CFASerialNoExport Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed . End Error Error: 2007-08-13 16:00:00.98 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection Manager". End Error DTExec: The packag... The package execution fa... The step failed.


All my other packages run fine. This one contains an FTP task and will not run, although it will run if I execute it through the visual studio.

View 3 Replies View Related

Problem With SSIS Package (dtsx)

Jan 31, 2007

Hi all!

I have open the one package dtsx and return this error:

Error loading 'Test.dtsx' : Error HRESULT E_FAIL has been returned from a call to a COM component.. c:projects... etc..
which the problem?

THX

View 2 Replies View Related

Newbie: Compiling A DTSx Package

May 16, 2006

I have now created a few simple SSIS packages. In BIDS I right-clicked on a solution and selected "Build". I went to the "bin" directory hoping to find a standalone ".exe.dll" file but found only a ".dtsx' file.

Can BIDS can actually build a standalone exedll or is the .dtsx file all that's available? (If so, I guess that another program is expected to invoke the .dtsx file.)



TIA,



barker

View 3 Replies View Related

Creating A Package Of Dtsx Packages

Jan 23, 2007

Hi



I am trying to build a package that is comprised of 100+ dtsx packages but cannot seem to get it to work. I have created a new connection where the connectionmanagertype = file and the file path is equal to the folder in which my dtsx files are located. I (location = fileSystem). No matter what I do I get an access denied error that shows the folder location but no package. I manually typed the name of the package in the PackageName property and have pasted in the PackageID in the appropriate property as well but I don't see anything in the PackageNameReadOnly. I have read the MSDN information but I don't see a step by step way to build a package of packages against which I can compare. Can anyone set me straight?



Thanks.

Robin

View 17 Replies View Related

How To Execute A SSIS Dtsx Package From An Asp.net 2.0 Application?

Jul 3, 2007

I have a SSIS package that I want users to be able to execute by clicking a button on an a web page. The package does not require any parameters to be passed to it. Previously I've executed DTS packages without any problems but after a fair bit of investigation and trawling the net I've not found a way to do this successfully with SSIS. Some code I've tried - Dim app As New Application()
'
' Load package from file system
'
Dim package As Package = app.LoadPackage("c:ssisPackage.dtsx", Nothing)

'package.ImportConfigurationFile("c:ExamplePackage.dtsConfig")
'Dim vars As Variables = package.Variables
'vars("MyVariable").Value = "value from c#"

Dim result As DTSExecResult = package.Execute()

lblResult.Text = "Package Execution results: {0} " & result.ToString()
  All I get is a message 'Failure'.
Does anyone have an example of how to do this?

View 10 Replies View Related

Running A Dtsx Package As A SQL Server Agent Job

Aug 31, 2007

I get the following error:

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".

The above path "I:...." is mapped on the server that SQL Server is running on.

This package runs with NO problems in MS Visual Studio.

View 1 Replies View Related

SQL 2012 :: DTSX Package - Starting And Stopping A Job

Feb 26, 2015

I have a job that runs a dtsx package (containing an infinite loop). What I want to do is set up a schedule to start the job at 8am and stop it at 5pm. The scheduling GUI doesn't give this kind of option (caveat: that I can see).

View 3 Replies View Related

Running SSIS Package (.dtsx) From A ASP.Net Web Service

Sep 17, 2007



Where do I find about running an SSIS package (.dtsx) from a ASP.Net web service, particularly issues to do with permissions

cheers
Rob

View 1 Replies View Related

DTSX Package Data Transfer Error

Jul 10, 2007

I will try to explain things the best I can.

When the data is transferred from source to destination (replace not append), the data in one field in one table is incorrect. Both source and destination tables have the same number of rows (8493). The ProductID field data range at the source is from 58958 to 73008. When the table is copied the ProductID field data runs from 1 to 8493.



What would cause this skewing of data?

This happens on brand new dtsx packages and this only happens in one field out of 5 different tables.



I am baffled. Any help is appreciated.



Thanks.

Andrew

View 16 Replies View Related

Best Way To Move Dtsx To A New Server And Be Able To Edit The Package

Aug 6, 2007



What is the best way to move a SSIS solution to a new server so that I can edit the solution when I have problems?

Thanks,

View 5 Replies View Related

Reading A .dtsx File's Package Configuration In VB.NET

Jan 10, 2008

So I've seen articles outlining how to execute a package in VB and how to pass variables along to the package, which is great.

But I'm wanting write a VB.NET app that will read the xml in a .dtsx package, looking for the available variables (and datatypes) that need to be passed to the package to configure it properly. Anyone done this? Is it best to use parent package variables? Or another type of configuration?

When looking at the xml of a .dtsx file, I can see a variables section that could be parsed... is there anything letting me know what is required versus optional? How do I know the datatype that I need to pass? Any help would be appreciated...

View 22 Replies View Related

Dtsx Package Taking Too Much Time To Validate

Dec 11, 2007

Does the validation time of DTSX package depend on the amount of data?

I have a data transfer task which contains a oledb source data from a SQL Server 2005 view. Then the data go through 3 Lookup transfromations before going into another view, also on SQL Server 2005 but a different database.
The purpose of this package is to load fact data, so it has to deal with few million of rows. Before setting DelayValidation to true, it takes few minutes just to open the package in BI Studio. Now with DelayValidation set to false, I can open the package without any problem. But it takes more than 5 minutes during Validation, Prepare for Execution and Pre-execution Phase. During the time the memory usage and cpu time on SQL Server goes up significantly. The CPU doesn't hit 100% though. My client machine doesn't have any significant activity.

I have similar packages ( Oledb view -> 3 or 4 lookup Transformations -> Oledb Table) but dealing with dimension data. With DelayValidaion set to False, those packages can be opened in BI Studio within few seconds. They also take only few seconds during those 3 phases before starting actual execution phase.

So I have an impression that the validation time depends on the amount of data in the database. Shouldn't it just depends on the metadata?

View 5 Replies View Related

Can You Embed DTSX Package In A C# Winform Executable?

Mar 22, 2008



Im trying to figure out if there is a way to embed an ssis package into a c# winform?

I know that I can pass variables to a package and write the entire package out programatically, but im curious if there is a way to add the dtsx as an assembly or something. OR is there any tool that would take the ssis package and spit out its equivalent in code?

thanks

View 6 Replies View Related

SQLDumper.exe Pops Up While Executing Dtsx Package

May 9, 2007

Hi All,

When I start executing my package a SQLDumper.exe pops up and Stops the package execution.
In addition,SQLDumper.exe creates a SQLDUMPER_ERRORLOG.log file at my Desktop with the following content

05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 255205/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000005/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used05/09/07 14:09:55, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0032.mdmp05/09/07 14:09:55, ACTION, DtsDebugHost.exe, Watson Invoke: No


Thanks in advance

View 4 Replies View Related

Why Does Add Existing Package Make A Copy Of The Dtsx?

Aug 9, 2005

How do we sync up dtsx files with Visual Source Safe? best practices?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved