Hi., Can anyone please assist me in getting the following SQL Query to work. It returns no errors but also returns no records even though there is actually data in my database for that period. Dim DCriteria as StringDCriteria = "StartDate <= " & EDateDCriteria = DCriteria & " AND EndDate >= " & SDatestrSQL = "SELECT * FROM vwLeavePlan WHERE " & DCriteria This results in the follwoing SQL Statement: strSQL = SELECT * FROM vwLeavePlan WHERE StartDate <= 31/05/2005 AND EndDate >= 01/05/2005 Regards. Peter
i want to filter the data on specified dates. (between dates).
SELECT a.UserID, b.Name, b.EmployeeNum,b.Department, MIN(a.TransactionTime) AS TransactionTime,a.TransactionTime as TR_Date, min(CONVERT(CHAR(20), TransactionTime, 113)) As TransactionDateTime FROM NitgenAccessManager.dbo.NGAC_AUTHLOG AS a INNER JOIN NitgenAccessManager.dbo.NGAC_USERINFO AS b ON a.UserID = b.ID WHERE (a.FunctionKey = ' ')
I need to select out a list of distinct pkeys and skeys only when there was no meeting between the two in November 2005. In other words, this query would produce only one record - the starred record - when run against this sample table. This is because even though, for example, skey 124 / pkey 2 has an entry outside the desired range, it also has one inside the desired range. The same goes for the record outside our range for 123 and 2 - it also has a record inside our range.
At this point, I've come to the conclusion that I can first select all the distinct pkeys and skeys where the servicedate is not in 11/2005 then join it to a selection of distinct pkeys and skeys where the servicedate IS in the desired date range. Does that seem like the most straightforward way through this?
I don't get the impression that this is that complicated a problem, but it's one of those deals where I goofed up somewhere along the line, and now I think I'm really overthinking the problem, so I'd be much obliged if someone could give me a hearty slap to clear the ol' noggin.
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U')) DROP TABLE [dbo].[temp_tbl] GO CREATE TABLE [dbo].[temp_tbl]( [tbl_id] [bigint] NULL, [cs_id] [int] NOT NULL, [USERID] [int] NOT NULL,
HI friends, I have a problem with sql server. I know that i should not discuss my problem in this forum. But the problem is demanding me to place it anywhere. The problem is i want to retreive data from a table between two dates. I have written the query as below. "select * from employees where hiredate between 01-05-1992 and 15-11-1994" But it is returning 0 rows.If anybody helps me in this issue it willbe helpful me.. Note: I have tried by changing all the date formats like DMY,MDY,YMD..........
I have a large table (2+Million records, 2000+ new per day). If I want to count the records in one month, I could do :-
Select Count(*) from Table1 where Added_Date between '1999-12-01' and '1999-12-31'
Select Count(*) from Table1 where Added_Date >= '1999-12-01' and Added_Date <= '1999-12-31'
For these two above, I get the same result.
If I then do:-
Select Count(*) from Table1 where Added_Date between '1999-12-01 00:00:00' and '1999-12-31 23:59:59' or use the >= and <= operators, the result is larger.
If I then do :-
Select Count(*) from Table1 where Added_Date between '1999-12-01 00:00:00.000' and '1999-12-31 23:59:59.999' or use the >= and <= operators, the result is larger still but i believe this including more rows than there actually is?.
I can get over the problem programatically using Convert to truncate to a day, month or year however, I don't understand why the results are different.
Any Ideas as to why this is happening, A'm I being stupid!!!!!!!
(PS Added_Date has a non_clustered index which has been rebuilt twice and DBCC finds no errors)
I have a DATESMTD function which is not working. This is what is happening, if there is no row data for the month it creates a month to date total similar to the year to date total instead of zero. See below my formula:
MTDSUM:=CALCULATE(SUM('Combined Years Dataset'[Net]),DATESMTD('Combined Years Dataset'[Period2]),'Date'[date])
Period 2 is a column with dates (end of monthdates) in a table called Combined Years Dataset.
So, if I have $200.00 data for Aug and no data for Sept, the system puts in 200.00 as the month to date for Sept instead of zero. What can I do to make the system insert zero in the month to date column instead of the $200.00. What am I doing wrong in the formula.
I have this simplified query below to illustrate what I'm looking for. I would like to get the data for the time between the two dates in the where clause ('01-05-2015' and '10-03-2015'). In SQL it would be a BETWEEN. I'm looking for the MDX equivalent.
I have these dates hard coded but what I eventually will be doing is an @BeginDate / @EndDate parameter in an SSRS report.
SELECT [Measures].[Ship Resale S&D Run Rate] ON COLUMNS, [Branches].[Region].[Region] ON ROWS FROM [Sales] WHERE [Time].[Date].&[01/05/2015]:[Time].[Date].&[10/30/2015] *WHERE @BeginDate : @EndDate
why the statement "where WD.WRKD_WORK_DATE BETWEEN DATEADD(DD, -6, GETDATE()) AND GETDATE()) = 0' is successful, but "WD.WRKD_WORK_DATE BETWEEN (DATEADD(DD, -16, GETDATE())) AND (DATEADD(DD, -3, GETDATE()))" is an invalid statement? I've tried a lot of different syntax variations of this statement and cannot get to work between two lookback dates.
In above example Business Name , Phase, Activity will repeat lonely but its work description will be generated in next section according to that business name and that date. How to achieve this task ? I have referred : [URL] ....
What I am trying to do: Obtain attendance percentages for schools for the last five days. The outcome would look like this:
DISTRICTGROUPING, SCHOOLNAME, 5 DAYS AGO PCTG, 4 DAYS AGO PCTG, 3 DAYS AGO PCTG, 2 DAYS AGO PCTG, 1 DAY AGO PCTG I am using nested subqueries for each day as follows: (total enrollment-total absent/total enrollment) ,( ((SELECTCOUNT(*)--GET TOTAL ENROLLMENT COUNT FOR SPECIFIED DATE
The query works with the following exceptions:
My issues are:
1. Avoid the "division by zero" error. This can occur if a school is closed for a day or if a smaller school has no absences for a day.
2. Avoid weekend dates. I need the query to display only weekdays
3. Currently I am using "PERCENTAGE 5: as a column header whereas I need the actual date as the header.
Ok, I'm looking to get counts on historical data where the number of records exists between two dates with different years. The trick is the that the dates fall in different years. Ex: Give me the number of records that are dated between 0ct 1, 2013 and July 1, 2014.
A previous post of mine was similar where I needed to get records after a specific date. The solution provided for that one was the following. This let me get any records that occured after May 1 per given Fiscal year.
SELECT MAX(CASE WHEN DateFY = 2010 THEN Yr_Count ELSE 0 END) AS [FY10], MAX(CASE WHEN DateFY = 2010 THEN May_Count ELSE 0 END) AS [May+10], MAX(CASE WHEN DateFY = 2011 THEN Yr_Count ELSE 0 END) AS [FY11], MAX(CASE WHEN DateFY = 2011 THEN May_Count ELSE 0 END) AS [May+11], MAX(CASE WHEN DateFY = 2012 THEN Yr_Count ELSE 0 END) AS [FY12],
I basically need to have CASE WHEN MONTH(OccuranceDate) between Oct 1 (beginning year) and July 1 (ending year).
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[PaymentsLog](
Is there a way to look at the DatePeriod table and use the StartDtae and EndDate as the periods to be used in the select statement and then cursor through each date between these two dates and then insert the data in to the PaymentsLog table?
I have a requirement to display project start date and finish date in timescale view. The data in database table available as per below -The start date and project finish date should fill color in the timeline view as per below example, by quarters for a current financial year, last year and plus two years a head.
I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
I have a table which records employees'time-off records. There are 6 columns in this TimeOff table. They are RequestID, EmpName, StartDate, EndDate, Type, NumofDays. I have another table which has all the dates from 01/01/1950 to 01/01/2056.
I am trying write a query which lists all the dates between the timeoff startdate and enddate, including the the start and end dates, but my query so far only lists the start and end date in a timeoff record:
SELECT D.[Date], Datename(dw,D.[Date]) AS Weekday FROM Dates D LEFT JOIN TimeOff T ON D.[Date] = T.OffStartDate OR D.[Date] = T.OffEndDate WHERE (OffType = 'Sick Day' AND EmpName = 'Cat White') AND (D.[Date] BETWEEN T.StartDate AND T.EndDate)
Has anyone ever written a function to retrieve all individual dates between two given dates? Using DATEDIFF I can get the number of days between two dates. However I need to iterate through the days to identify weekend and holiday dates. Has anyone ever written a function to do this?
So, if select datediff(d,'07/01/2007','07/15/2007') as NumOfDays returns 14, I'd need to iterate through the 14 days and get the weekends and holidays. Would I have to use a cursor to iterate through the days?
I'm trying to generate this query, that displays Budget Current Year , Actual Current Year and Prior Year Revenue. When It comes to the Budget and Actual everything works fine, however when I try to add the query for the Prior Year I get an error, and I realized that the leap date is causing the error
Here is what I'm trying to generate
InnCodeID Quarterly Monthly Days Period Year BARmRev AARmRev PYRmRev
ADDIS Q1 Jan 1 1 2008 NULL NULL
ADDIS Q1 Jan 1 1 2008 3462.14 5107.65
ADDIS Q1 Jan 1 1 2008 NULL NULL
ADDIS Q1 Jan 1 1 2008 NULL NULL
Here is the error that I'm getting:
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
(4834 row(s) affected)
Here is my Transact-SQL Syntax (summarized because I Couldn't post it):
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01'
AND Year(dbo.Trans.TR_Date) = Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1'
THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
FROM dbo.Trans Trans1
WHERE Trans1.TR_Dept = '10' AND TR_Main = '5120' AND TR_Sub = '01' AND trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date)
AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Year(dbo.CurrentDate.CurrDate) AS varchar(4))) AS datetime)
AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND trans1.datatype = dbo.Trans.DataType) ELSE NULL END) * - 1 AS BARmRev,
--AA Script Here AS AARmRev,
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01' AND Year(dbo.Trans.TR_Date)
= Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1' THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
FROM dbo.Trans Trans1
WHERE RIGHT(RTRIM(Trans1.TR_Dept), 2) = '10' AND Trans1.TR_Main = '5120' AND Trans1.TR_Sub NOT BETWEEN '04' AND '05' AND
trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2))
+ '/' + CAST(Year(dbo.CurrentDate.CurrDate)-1 AS varchar(4))) AS datetime) AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND
Hello All, I am trying to Add certain number of days to a particular date. and my requirement is that it need to exclude all saturdays and sundays and then give me the resultant date in Sqlserver. Please can anyone help me in achieving it. thanks Shiva Kumar
Hi can anyone help me , or am I on the wrong track.
Is there any easy way to create a stored procedure that inserts into a table the relevant months dates into a table based on the month and year as parameters. I.e say the parameters passed are 01/2001 hence based on this all of the month of January 2001 dates are inserted into a table in this format : 'Jan 01 2001 12:00:00'
We are deploying a system in the UK in SQL Server 6.5. They want the date to default to dd/mm/yy. Is there a way to set this on a permanent basis? Is there a way to set the server so any time a date is display, including getdate(), the result is dd/mm/yy?