how to select record from the table where the data between a range. example between 2/16/2005 and 12/16/2005. the data record in the table formated like this ( 2/16/2005 11:44:38 PM). help me with some sql code, thanks
View 2 RepliesI have the following table:
Occ_Num Feature_Num Trans_Date Peril_Desc
123 1 1-2-2012 Water
123 1 1-11-2012 Ice
123 2 1-2-2012 Other
123 2 1-13-2012 Other
123 2 1-19-2012 Wind
I want to select each Occ_Num, Feature_NUM, Trans_Date, and PERIL_Desc but with only the Peril that was part of the max trans_date.
So i would want the following from above:
Occ_Num Feature_Num Trans_Date Peril_Desc
123 1 1-11-2012 Ice
123 2 1-19-2012 Wind
I'm having trouble with the syntax need to accomplish this.
Hi,
I have a base query that will return the ID, StartDate and Code for all IDs. I SELECT only for Codes 5 and 9. For most of the IDs I return a record for both a Code 5 and Code 9. They will have different dates however. How could I select from this base query one record for each ID with the oldest date? The items in yellow are the ones that I would want to return to a report in SSRS. Is there a way to put this data in a temp table and read through it to compare IDs and grab the one with the older date?
ID
StartDate
Code
100
1/2/2000
5
100
4/6/2004
9
205
3/13/2002
5
205
9/10/2002
9
300
10/10/1999
9
407
2/12/2005
5
407
7/17/2007
9
Thanks,
rb
Hi:
I used this statement, select * from table1 where date1 = null, in SQL Query window and got a few records back. Now, I used the same statement in my VB 5 code and no record is found. How do I select all the records in table1 which do not have values in field date1? Thanks for the help.
-Nicole-
I have a situation where an agent has number of activities for a certain date range. If an agent has multiple activities within certain date range, I would like BALANCE BEFORE from the first activity and BALANCE AFTER from the last activity. Here is my current SQL query that returns the following data:
DECLARE @BeginDate Datetime
DECLARE @EndDate Datetime
Set @BeginDate = '05-1-2015'
Set @EndDate = '05-31-2015'
SELECT
a.AgentName,
R.BALANCEBEFORE,
[Code] ....
AGENTNAME BALANCE BEFORE BALANCE AFTER DATE
DOUGLAS 9738.75 9782.75 2015-05-11
DOUGLAS 9782.75 9804.75 2015-05-12
DOUGLAS 9804.75 9837.75 2015-05-13
In the sample data above, ideally I would like my query to return data as follow:
AGENTNAME BALANCE BEFORE BALANCE AFTER
DOUGLAS 9738.75 (from first activity) 9837.75 (from last activity)
Not sure how I can write sql query to accomplish this.
Hi All,
Here is my story, how to change a column called Flag_Status based on the maximum Updated date. i.e. i want to make Flag_Status be 1 for the records which have maximum Updated_date (current record) and the rest to make it 0. for example accountID 1 has three records updated, but only one is current the rest are historical, thus i want the history record to be Falg_status 0 and the current record be 1. Note that Inserted_Date and Updated_Date are created using SSIS Derived column During loading the source table, it helps me when each record is inserted into the Data warehouse.
Here is My source table Name: Source_table,
CREATE TABLE dbo.Source_table
(
AccountID INT PRIMARY KEY,
Price int,
Address varchar(30),
added DATETIME DEFAULT GETDATE(),
edited DATETIME DEFAULT GETDATE(),
Flag_Status Int Default 1
)
GO
Here is the Fact_table
CREATE TABLE dbo.Fact_table
(
Fact_table_Key Int Identity (1, 1) NOT NULL,
AccountID INT,
Price INT,
Address varchar(30),
added DATETIME DEFAULT GETDATE(),
edited DATETIME DEFAULT GETDATE(),
editor VARCHAR(64),
Flag_Status Int Default 1,
Inserted_Date DATETIME DEFAULT GETDATE(),
Updated_Date DATETIME DEFAULT GETDATE()
)
GO
Source_table:
AccountID Price Address added edited Flag_Status
---------------- --------- ------------- ----------- ------------- ------------------
1 10 xyz 01-2006 01-2006 1
2 14 abc 02-2006 02-2006 1
3 13 mno 03-2006 03-2006 1
Here is the fact table, table name= Fact_table
Fact_table_Key AccountID Price Address added edited Flag_Status Inserted_Date Updated_Date
-------------------- ------------- --------- ------------ ------- --------- ---------------- ------------------ -------------------
1 1 10 xyz 01-2006 01-2006 1 05-2006 NULL
2 2 14 abc 02-2006 02-2006 1 05-2006 NULL
3 3 13 mno 03-2006 03-2006 1 05-2006 NULL
4 1 17 ght 01-2006 06-2006 1 NULL 08-2006
5 2 18 dmc 02-2006 07-2006 1 NULL 08-2006
6 3 20 kmc 03-2006 09-2006 1 NULL 10-2006
7 1 19 xyz 01-2006 11-2006 1 NULL 12-2006
8 2 19 klm 02-2006 01-2007 1 NULL 02-2007
9 3 21 pqr 03-2006 03-2007 1 NULL 04-2007
Here is what i am thinking: But it gives me Wrong Flag_Status.
UPDATE Fact_table
SET Flag_Status =
CASE
WHEN (SELECT Max(Updated_Date) From Fact_table
WHERE AccountID IN (SELECT AccountID FROM Fact_table
Group By AccountID Having Count(AccountID)>1)) >
(SELECT Max(edited) From Source_table
WHERE Flag_Status = 1)
THEN 1
WHEN (SELECT AccountID From Source_table
Group By AccountID
Having Count(AccountID) =1) =
(SELECT AccountID From Fact_table
WHERE Updated_Date IS NULL)
THEN 1
ELSE 0
END
I am working on a query that needs to return the record order number with the most recent requested delivery date.
It seems to work most of the time, but I have found some glitches for some of the items.
example is my item 10702, it is showing 2 records (both valid ones)
Record 1 is order # 10450-0, requested delivery date 03/21/2014
Record 2 is order # 10510-0, requested delivery date 04/29/2014
I need to only get the records with the most recent delivery date, in this example that would be 04/29/2014
This query is what I have so far:
SELECT
s.PriorQuoteNumber
,s.PriorItemNumber
,s.PriorQuoteDate
FROM
(
SELECT
s.SalesQuoteNumberAS 'PriorQuoteNumber'
[code]....
WHERE s.rn = 1What am I missing in my query> how can I change it so it only returns the most recent date?
May I know how to use a "date" to select out previous 14 days record from the table? and find the duplicated records?
-- sort out duplicate order from tblOrder
Select * FROM tblOrder
WHERE DDay > @prmDDay("day", -14, getDate())
Group by DDay
Many thanks~~~~~
Fr New Learner
Hi
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row?
thanks
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
hello
how can i select all dates upto todays date and include the first next future date in a given data base
say todays date was the 01/06/2006 (MM,DD,YYYY)
below is a mock data base
id date (MM,DD,YYYY)
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
5 01/20/2006
i want to select all dates equal or less that 01/06/2006 and include the first next future date .. and in this case it would be 01/09/2006
so the results would return
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
I have the following table and have included some sample data. Basically, the records are grouped by opid and it shows ownership changes for the opids. It only shows the owner change date which is the date that the owner was assigned to the opid. What I want to figure out is the date that the owner ceased to be assigned to the opid as well. If it is still the current owner then the end date should just be the current date.
Code Snippet
CREATE TABLE #op_owner_history(
[opshid] [int] IDENTITY(1,1) NOT NULL,
[opid] [int] NOT NULL,
[role] [varchar](30) NOT NULL,
[rep] [char](20) NOT NULL,
[percentage] [int] NOT NULL,
[ownerchg_date] [datetime] NOT NULL,
[ownerchg_rep] [char](20) NOT NULL,
CONSTRAINT [PK_#op_oppshare_history] PRIMARY KEY CLUSTERED
(
[opshid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [PRIMARY]
) ON [PRIMARY]
SET IDENTITY_INSERT #op_owner_history ON
GO
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (4653, 23795, 'Sales','KOHLENBERG', 100, '9/26/2006 3:57:22 PM', 'Kohlenberg')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (8576, 23795, 'Sales', 'Haber', 100, '1/3/2007 10:40:00 AM', 'ADMIN')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (9363, 23795, 'Sales', 'KOHLENBERG', 100, '1/4/2007 12:40:14 PM', 'Kohlenberg')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (2919, 24623, 'Sales', 'COLEMAN', 100, '9/1/2006 12:02:03 PM', 'Dunkel')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (15475, 24623, 'Sales', 'COLEMAN', 100, '5/8/2007 8:10:51 AM', 'Woodruff')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (8580, 24623, 'Sales', 'Woodruff', 100, '1/3/2007 10:40:00 AM', 'ADMIN')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (4310, 5548, 'Sales', 'KOHLENBERG', 100, '9/19/2006 1:53:47 PM', 'KOHLENBERG')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (10649, 5548, 'Sales', 'HABER', 100, '2/7/2007 3:50:40 PM', 'Kohlenberg')
Based on this sample data, here is what I want to see in the results: (My apologies, I couldn't get it formated very well to make it more readable.)
opshid opid role rep percentage ownerchg_date End Date ownerchg_rep
4310 5548 Sales KOHLENBERG 100 9/19/2006 1:53:47 PM 2/7/2007 3:50:40 PM KOHLENBERG
10649 5548 Sales HABER 100 2/7/2007 3:50:40 PM GETDATE() Kohlenberg
4653 23795 Sales KOHLENBERG 100 9/26/2006 3:57:22 PM 1/3/2007 10:40:00 AM Kohlenberg
8576 23795 Sales Haber 100 1/3/2007 10:40:00 AM 1/4/2007 12:40:14 PM ADMIN
9363 23795 Sales KOHLENBERG 100 1/4/2007 12:40:14 PM GETDATE() Kohlenberg
2919 24623 Sales COLEMAN 100 9/1/2006 12:02:03 PM 1/3/2007 10:40:00 AM Dunkel
8580 24623 Sales Woodruff 100 1/3/2007 10:40:00 AM 5/8/2007 8:10:51 AM ADMIN
15475 24623 Sales COLEMAN 100 5/8/2007 8:10:51 AM GETDATE() Woodruff
if there are 2 records with different date how to write query for ----> get record with latest date
View 4 Replies View RelatedHello gurus, I have a table of data containing stop and start times of equipment, such as this:
StartTime....................EndTime
12/01/01 15:44...........12/01/01 18:44
12/02/01 3:44............12/02/01 14:44
12/02/01 15:22...........12/02/01 15:33
etc.
With this, I can build a query that subtracts the start and end dates to give me the total differences between each record... But, how do I write a query that can count the elapsed time between the current record's "start time" and the prior record's "end time" to give me the elapsed time between each record?
I want to get latest updated date on each transid and only for status =approved .
-------------------
out put would be
------------
idtransid date status
31013/1/2014 approved
61031/2/2014 approved
table
-----------
idtransid date status
11011/1/2014 approved
21012/1/2014 close
31013/1/2014 approved
41021/2/2014 approved
51022/2/2014 close
61031/2/2014 approved
How to update the Last Update Date of a modified record? I want to put this in table trigger .
Or any setting can be used?
Please help~~~~
Hey all,
I just discovered this cool forum. I am fairly new to T-SQL, so please bear with me.
Here is my problem. I am trying to return 1 record for each distinct MachineName, based on the most current CreateTime.
I have tried a bunch of different things, but the follwing query seems to get me close, except for all of the records, per MachineName, that aren't the newest CreateTime. Can anyone offer a suggestion I may be missing?
Here is my query:
SELECT
rcv.Name AS MachineName, r.CreateTime, rpv.Path + rpv.Name AS ResourcePool
FROM
dbo.Result_View AS r WITH (NOLOCK) INNER JOIN
dbo.ResourceConfiguration_View AS rcv WITH (NOLOCK) ON r.ResourceConfigurationId = rcv.Id INNER JOIN
dbo.Resource_View AS rv WITH (NOLOCK) ON rcv.ResourceId = rv.Id INNER JOIN
dbo.ResourcePool_View AS rpv WITH (NOLOCK) ON rv.ResourcePoolId = rpv.Id
WHERE
(rpv.Name NOT LIKE 'Archive')
AND
(r.CreateTime > '2/1/2008')
AND
(r.CreateTime = (SELECT TOP (1) r.CreateTime FROM dbo.Result_View))
ORDER BY MachineName
I have added the '2/1/2008' filter, so as not to hammer the DB too hard. It goes back for some time.
Thanks in advance,
Allen
I have records like this
id address1 date
1 xyz 01/01/2013
1 abd 01/01/2014
2 dfg 01/03/2015
Now what I want is just 1 record by id which has max date,if there is 2 records for same id, if there is 1 record then it should come.
So here result should be
1 abd 01/01/2014
2 dfg 01/03/2015
At the moment i have a query that is dependent on a date which is 42 days before whatever the date may be today.
The statement in my query I have to use is:
MailDate <= '2008-01-05'
I am wondering if i could make that statement automatically take off 42 days from todays date?
Hi
Here is my example: I have the following table
ID Name Phone
--- ---- -----
1 John 1234567
1 John H.
2 Dave 9876543
2 Dave Smith
I want to select only one record of each ID, the output should be
ID Name Phone
--- ---- -----
1 John 1234567
2 Dave 9876543
It doesn't matter which record to select, but I need just a single complete record. I can't use select distinct ID because it will not show the other fieldnames.
Thanks
I have a sql query that looks for values in a few different databases....
is there a way to select the last record in the table b/c I am pulling the hours worked on jobs and one person may have 3 job titles but i want it to show the balance of hours under the most recent job... Instead all the jobs are showing the same value even though only one of them had those hours under it. I think a way to get around this is to select the last value b/c that is under the job title most recently worked and they are in order by timesheets which can be ordered by date...any ideas?
I have view with Patients name and Appointment table where I save those patients. How to create store procedure if I would like to select one patient record based on Patient_Id value?
View 3 Replies View RelatedHi,
The following is a VB code which I use it to check the existence of the record before I insert a new record
into my SQL 7.0 database. When I run the vb code, I got an error which is
"-2147217913 [Microsoft][ODBC SQL Server Driver][SQL Server]The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value." I couldn't figure out what's wrong with my code especially the WHERE clause.
Please help me look into this problem. TQ.
Private Sub AddDate()
Dim rstDate As ADODB.Recordset
Dim myDate As Date
Dim Criteria As String
myFileDate=#27-10-2000 16:00#
myDate = Format(myFileDate, "mm-dd-yyyy")
Criteria = "SELECT Date " _
& "FROM DateGen " _
& "WHERE Date = '" & myDate & "'"
Set rstDate = New ADODB.Recordset
With rstDate
.ActiveConnection = cn
.CursorType = adOpenDynamic
.LockType = adLockOptimistic
.Open Criteria
End With
If rstDate.RecordCount > 0 Then
RecordExist = True
Else
RecordExist = False
rstDate.AddNew
rstDate("Date") = Format(myFileDate, "dd-mm-yyyy")
rstDate.Update
End If
rstDate.Close
End Sub
Regards,
May
How can I automatically change records by a specific date specified inside the record. An example would be the way ebay sales work. How does ebay have the status of an item change to closed, at the time inside the item record of the database.
I know i could use triggers or something to check the current date against the enddate everytime the record is accessed, but is there a more efficient method?
I HAVE THIS SQL STATEMENT WHICH GET THE MIN(AMOUNT) and MAX(AMOUNT) and DISPLAY IT IN A SINGLE ROW.
HOW CAN I GET THE RECORD BEFORE THE MAX (AMOUNT) INBETWEEN DATES IN CASE THERE ARE 4 RECORDS WITH SAME EMPLOYEENO IN THE DATE RANGE SPECIFICIED ? THIS IS SORTED BY EMPLOYEENO AND STARTDATE DESC
SELECT EmployeeNo, StartDate AS StartDate, MIN(Amount) AS oldsalary, EndDate AS EndDate, BenefitCode,
(SELECT TOP 1 MAX([amount])
FROM EMPBENEFITS T2
WHERE T2.employeeno = T.employeeno AND startdate >= '2001-06-01' AND startdate <= '2007-06-02') AS newsalary
FROM dbo.empBenefits T
WHERE (StartDate IN
(SELECT TOP 1 ([startdate])
FROM EMPBENEFITS T1
WHERE T1.employeeno = T.employeeno AND Benefitcode <> 'HON' AND startdate >= '2001-06-01' AND startdate <= '2007-06-02'))
GROUP BY EmployeeNo, Amount, BenefitCode, StartDate, EndDate, Amount
ORDER BY EmployeeNo, StartDate DESC
THANK YOU SO MUCH ...
i want to get latest updated date on each transid and only for status =approved .
-------------------
out put would be
------------
idtransid date status
31013/1/2014 approved
61031/2/2014 approved
table
-----------
idtransid date status
11011/1/2014 approved
21012/1/2014 close
31013/1/2014 approved
41021/2/2014 approved
51022/2/2014 close
61031/2/2014 approved
I am currently using this SQL code to capture some records over the last 2 months and it has been working great. I am now being asked if I can change this code with specifications:
1) Scan the records in the system until the count (*) as Volume reaches 30 because they prefer that as a denominator when figuring an average
2) Only run the scan for a maximum of 6 months.
So, there will most likely be some records that do not reach a volume number of 30 in this date range. In this instance we will just take the maximum volume number reached at 6 months.
So, how can I write this so it will build the file each time a record has reached the maximum of 30 and keep scanning back until we reach 6 months? If someone could lead me in the right direction on the proper order of the methodology in my code to accomplish these results it would be greatly appreciated. Desperate!
declare
@startdate smalldatetime,
@enddate smalldatetime ,
@month int,
@year int
select
@startdate = dateadd (mm, -2, getdate())
SELECT
@month = datepart (month, @startdate),
@year = datepart (year, @startdate)
SELECT
@startdate = convert (smalldatetime, convert(varchar(2), @month) + "/1/" + convert (varchar(4), @year))
select
@enddate = dateadd (mm, 2 , @startdate)
select distinct
pe1.patev_loc_id as LocID,
pp_cproc_id_r as ProcID,
count (*) as Volume,
sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time)) as Minutes,
sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time))/count(*) as AvgMin
from
risdb_rch08_stag..performed_procedure (index pp_serv_time_r_ndx),
risdb_rch04_stag..patient_event pe1,
risdb_rch04_stag..patient_event pe2
where
pp_service_time_r between @Startdate and @Enddate
and pp_asn_req_no = pe1.patev_asn_req_no
and pp_asn_seq_no = pe1.patev_asn_seq_no
and pp_status_v = 'CP'
and pp_rep_id > 0
and pe1.patev_event_code = 'PB'
and (pp_asn_req_no = pe2.patev_asn_req_no
and pp_asn_seq_no = pe2.patev_asn_seq_no
and pe2.patev_event_code = 'PL')
and datediff (mi, pe1.patev_event_time, pe2.patev_event_time) > 0
group by
pe1.patev_loc_id , pp_cproc_id_r
I have one table :
file _target
which has below records..
file_target_ID is identity column which will repeat per files_ID
Now, i just shown Target log for file_ID 77796 see the last Target Date i want another column which returns a previous log Target date for each files beside Target date column
Like this ..
Target Date New Column
2015-09-09 00:00:00.000 2015-09-16 00:00:00.000
2015-09-16 00:00:00.000 2015-09-25 00:00:00.000
2015-09-25 00:00:00.000 New Target date after 25-9-2015
how to do this in SQL Server ??
using Cross Apply ?? Row_Number() ??
I have a table which shows data in below format
Now I need that only the max date record should be shown for every student as shown below...
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together
select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
please help
mustfa