Sql Stored Procedure - With In Cursor Get @@identity Value For Insert And Use That Again

Problem With @@identity Return In Stored Procedure Insert.
I'm having a problem I do an insert into a table but I want to return the value of the identity field of that insert so I can email a confirmation. For some reason this code doesn't work.
Below is the stored procedure I'm calling and below that the code I'm using. What am I doing wrong. The value I have returned is null when it should be a number. Any suggestions. Why does finalMagicNum2 come back null when it should grab the identity field of the inserted record.




CREATE PROCEDURE addMagicRecTest
(
@theSequence int,
@theSubject int,
@theFirstName nvarchar(50)=null
@theLastName nvarchar(75)=null
)



AS

INSERT INTO employees([Sequence],subject,firstname,lastname)
VALUES(@theSequence,@theSubject,@theFirstName,@theLastName)
SELECT @@identity AS finalNum



magicDataConnect = ConfigurationSettings.AppSettings("myDataConnect")
Response.Write(magicDataConnect)
magicCommand = New SqlDataAdapter("addMagicRecTest", magicDataConnect)
magicCommand.ConnectionType = CommandType.StoredProcedure
magicCommand.SelectCommand.CommandType = CommandType.StoredProcedure

' Sequence ID for request
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSequence", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSequence").Value = "41833"

' Subject for new Wac Ticket
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSubject", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSubject").Value = "1064"


' First Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theFirstName", SqlDbType.NVarChar, 50))
magicCommand.SelectCommand.Parameters("@theFirstName").Value = orderFirstName

' Last Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theLastName", SqlDbType.NVarChar, 75))
magicCommand.SelectCommand.Parameters("@theLastName").Value = orderLastName



DSMagic = new DataSet()
magicCommand.Fill(DSMagic,"employees")

If DSMagic.Tables("_smdba_._telmaste_").Rows.Count > 0 Then
finalMagicNum2 = DSMagic.Tables("_smdba_._telmaste_").Rows(0)("finalMagic").toString
End If





I need finalMagicNum2

View Replies !

---

@@Identity Being Over-written By Insert Trigger In Stored Procedure.
Hi All

I have a problem with an existing stored procedure that is used to insert a new entry to a table (using an Insert statement).

I have been using the @@Identity global variable to return the identity column (id column) back to the calling routine. This has worked fine for years until recently an ‘after insert Trigger’ has been added to the table being updated.

Now the @@Identity is returning the identity value of the trigger that was called instead of the original table insert.

Does anyone know how I can code around this issue (without using a select statement within my stored proc, as these have been known to cause locks in the past).

Thank in advance.

Eamon.

View Replies !

---

Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
I have a sub that passes values from my form to my stored procedure.  The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page.  Here's where I'm stuck:    Public Sub InsertOrder()        Conn.Open()        cmd = New SqlCommand("Add_NewOrder", Conn)        cmd.CommandType = CommandType.StoredProcedure        ' pass customer info to stored proc        cmd.Parameters.Add("@FirstName", txtFName.Text)        cmd.Parameters.Add("@LastName", txtLName.Text)        cmd.Parameters.Add("@AddressLine1", txtStreet.Text)        cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue)        cmd.Parameters.Add("@Zip", intZip.Text)        cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text)        cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text)        cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text)        cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text)        cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text)        ' pass order info to stored proc        cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue)        cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue)        cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue)        'Session.Add("FirstName", txtFName.Text)        cmd.ExecuteNonQuery()        cmd = New SqlCommand("Add_EntreeItems", Conn)        cmd.CommandType = CommandType.StoredProcedure        cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc)   <-------------------------        Dim li As ListItem        Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar)        For Each li In chbxl_entrees.Items            If li.Selected Then                p.Value = li.Value                cmd.ExecuteNonQuery()            End If        Next        Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder)  and pass that to my second stored procedure (Add_EntreeItems)

View Replies !

---

How Can I Assign A Stored Procedure As Cursor's Data Source In AStored Procedure?
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
 
Something like this:
 
CREATE PROCEDURE TestHardDisk
AS
BEGIN

DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
   -- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
 
OPEN CURSOR HardDisk_Cursor

 
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space

WHILE @@FETCH_STATUS = 0
BEGIN

...
END
END

View Replies !

---

Cursor With Stored Procedure
I have a stored procedure that basically recieves the where clause of a select statement and executes the new sql statement... ie:

CREATE PROCEDURE [dbo].[bsa_GetImportIDs]
(@FilterText varchar(1000))
AS

DECLARE @MySQL varchar(1000)

SET @MySQL = "SELECT Import_ID FROM tblImport WHERE " + @FilterText

EXEC (@MySQL)
GO

Now, in another stored procedure, I need to use the stored procedure above in a cursor so that I can execute an insert statement for each occurance of the Import_ID that appears in that dataset... ie:

CREATE PROCEDURE [dbo].[bsa_PutLargeCase]
AS

DECLARE @CaseID uniqueidentifier
SET @CaseID = NewID()
Declare @ImportID uniqueidentifier

Declare curClient Cursor FAST_FORWARD for
SELECT Import_ID FROM dbo.bsa_GetImportIDs (@FilterText) <---- this does not work!!!

Open curClient
FETCH NEXT FROM curClient INTO @ImportID
WHILE @@FETCH_STATUS = 0
BEGIN

EXEC dbo.bsa_PutCaseDetail @CaseID, @ImportID

FETCH NEXT FROM curClient INTO @ImportID
END

CLOSE curClient
DEALLOCATE curClient

GO

How can I utilize my first stored procedure in the cursor of the second? ... or
Are there any other approaches that may be a better solution to what I am trying to accomplish?

Thanks in advance for any input.

View Replies !

---

Stored Procedure Into A Cursor
Hi guys!!I am trying to fill a cursor with the results of a StoredProcedured, but SQL give me an syntax error message , does any one cangive me some helpI am using SQL Server, this is the first lines of my codeDECLARE FRates_Cursor CURSOR FORexec GET_FJRs_Eng 'all'OPEN FRates_Cursorif I run just the exec GET_FJRs_Eng 'all' line it give me the dataresults I am trying to put into the cursor, what that means is thestored is working fineThanks in advance

View Replies !

---

Help In Stored Procedure With Cursor
I am trying to create the procedure from two tables to create the flat file
from the two tables and as they are processed to the file then want to change the
status from 'U' to 'P'.
I am trying to declare the cursor from the union of two tables so that I can
store the data into one table.
And then put the data into the flat file and then marked the processed data as 'P' from 'U'
please help in doing that.
thanks,
Harish


CREATE PROCEDURE SP_P8

AS

declare c123 cursor for

select 'CA'+'|'+COMPANY+'|'+COMPANYNAME+'|'+CUSTOMERNUMBE R+'|'+COMPANYPHONE
+'|'+COMPANYFAX+'|'+FEDTAXID+'|'+DUNSNUMBER+'|'+S1 099+'|'+DUNSSUFFIX+'|'+convert(char,ADDRESSSEQ)
+'|'+COUNTRY+'|'+ADDRESSTYPE+'|'+ADDRESS1+'|'+ADDR ESS2+'|'+ADDRESS3+'|'+ADDRESS4
+'|'+CITY+'|'+STATE+'|'+ZIP+'|'+FAXNUMBER hello1,status
from v1

UNION

select 'CT'+'|'+COMPANY+'|'+CONTACTNAME+'|'+CONTACTTYPE+' |'+CONVERT(CHAR(10),CONTACTADDRESS)
+'|'+PHONE+'|'+FAX+'|'+TITLE hello,status
from v3

declare @status char(1)
declare @wholerecord text

open c123
fetch next from c123 into @wholerecord,@status
while @@fetch_status=0

begin

update v1 set status='P' where current of c123
update v3 set status='P' where current of c123
fetch next from c123 into @wholerecord,@status

end
close c123
deallocate c123

select * into temp23 from v2 where status='P' and

declare @v datetime
declare @filename varchar(32)
select @v=getdate()
select @filename = 'XCUST'+CONVERT(varchar, @v, 112)+ SUBSTRING(CONVERT(varchar, @v, 108), 1, 2)
+ SUBSTRING(CONVERT(varchar, @v, 108), 4, 2)+ SUBSTRING(CONVERT(varchar, @v, 108), 7, 2) + '.TXT'
declare @cmdstring varchar(255)
Select @cmdstring = 'bcp conversion..temp23 out d:est' + @filename + ' -c -t"|" -r -S -Usa -Ppassword'


exec master..xp_cmdshell @cmdstring
drop table temp23

View Replies !

---

Help In Stored Procedure With Cursor
Please help in creating the stored procedure for
the following code.

Thanks in Advance.
=============================
Create procedure extractdata

@companynumber varchar(3),
@firstdateofmonth int,
@lastdateofmonth int

as
truncate table xt

truncate table xtt


insert into xt(account_code,balance_date,net_change,current_ba lance,oldlob)
select account_code, balance_date,net_change,current_balance,@companynu mber
from ccc@companynumber..glbal where balance_date<=@firstdateofmonth


declare @v1 varchar(32)
declare @v2 int
declare @v3 float


declare c1 cursor for
select account_code, max(balance_date) from xt
where oldlob=@companynumber
group by account_code

open c1


fetch next from c1 into @v1,@v2
WHILE @@FETCH_STATUS = 0

begin
update xt set status='max' where account_code=@v1 and balance_date=@v2
and oldlob=@companynumber
fetch next from c1 into @v1,@v2

end

close c1
deallocate c1


insert into xtt(account_code,balance_date,net_change,current_b alance,oldlob)
select account_code,balance_date,net_change,current_balan ce,oldlob from xt
where status='max' and oldlob=@companynumber
order by account_code

insert into test1(account_code,current_balance,net_change,bala nce_date,oldlob)
select account_code,round(current_balance,2),round(net_ch ange,2),balance_date,@companynumber
from xtt where oldlob=@companynumber
and account_code in (select account_code from xxxmay where oldlob=@companynumber)

update test1 set net_change=0 where balance_date<@lastdateofmonth
and oldlob=@companynumber

select sum(current_balance),sum(net_change) from test1
where oldlob=@companynumber

View Replies !

---

Out A Cursor From A Stored Procedure
hello!

any of you have an idea how i can declare an output parameter for my cursor which is inside a stored procedure. i would lik to see the output using the exec command but i don't know how to get the out from my cursor.
please help!

honey

View Replies !

---

Using Cursor As OUT Parameter In Stored Procedure
Hi guys,
I have a serious problem.
I need to use my cursor as an out parameter, but the problem is, HOW CAN I CLOSE THE CURSOR??????If I dont close the cursor, my server is getting really slow because of the open cursors, cause I have more than 100 stored procedures, which have a cursor as an out-parameter.Here's one of my stored procedures :

create or replace PACKAGE pkgResIS TYPE resType IS REF CURSOR RETURN res%ROWTYPE;END pkgRes;
create or replace procedure res_sel_val(p_id in number,cs out pkgRes.resType)asBEGIN  open cs for  select * from res where res_id = p_id;  --close cs;EXCEPTION  when others then     raise_application_error(-20970, 'record kan niet geselecteerd worden');END res_sel_val;
How can I close my cursor? If I write the "close cursor" (which is in red at the code above), it returns an empty cursor, which is not my intention.Please help me with thisThanks in advance Morph 'n Nike

View Replies !

---

Creating Cursor From Stored Procedure
Hi guys!i want to create one cursor in the t-sql. the problem is i want to usestored procedure instead of select command in cursor.can anyone tell me how can i use stored procedure's o/p to createcursor?i'm using sql 2000 and .net 2.0thanks,Lucky

View Replies !

---

Error From Stored Procedure With A Cursor
I receive the following intermittent error when executing a stored procedure:

Msg 16942, Sev 16: Could not generate asynchronous keyset. The cursor has been deallocated. [SQLSTATE 42000]
Msg 3624, Sev 16: Location: lckclass.cpp:111 Expression: m_status == ACTIVE || m_status == ORPHANED SPID: 17 Process ID: 203 [SQLSTATE 01000]

The process uses a cursor to update a SQL7 table from another. This is not a consistent failure. Sometimes the procedure runs fine to completion. Has anyone else had the same problem??? We had a suggestion that it might be a tempdb problem??? Any ideas?

View Replies !

---

Dynamic Cursor In Stored Procedure
when i try to compile the following sp, i get an error Line 11:Incorrect syntax near;. Can someone please tell me what i am doing wrong. thanks a lot.

CREATE PROCEDURE test_dump (@p_query nvarchar(4000)) AS
declare

@cmdtxt as varchar(4000),
@SQLString NVARCHAR(4000),
@SQLString1 NVARCHAR(4000),
@pid varchar(22),
@lname varchar(60)
begin

EXEC SQL BEGIN DECLARE SECTION;

char prep[] = @p_query;

EXEC SQL END DECLARE SECTION;

EXEC SQL PREPARE prep_stat FROM :prep;

EXEC SQL DECLARE contact_crsr CURSOR FOR prep_stat;



OPEN contact_crsr
FETCH NEXT FROM contact_crsr
INTO @pid, @lname


-- Check @@FETCH_STATUS to see if there are any more rows to fetch.

WHILE @@FETCH_STATUS = 0

BEGIN

SET @SQLString1 = 'HELLO ' + @pid + ' ' + @lname
select @cmdtxt = "echo " + @SQLString1 + " >> c:empmyfile.txt"
exec master..xp_cmdshell @cmdtxt

FETCH NEXT FROM contact_crsr

INTO @pid, @lname

END



CLOSE contact_crsr

DEALLOCATE contact_crsr


end

View Replies !

---

How To Declare Cursor In Stored Procedure?
I am trying to decalare the cursor in the below stored procedure. Can any one please help me to correct the cursor declaration?? Basically, i am testing how to declare the cursor in stored procedure.

CREATE PROCEDURE STP_EMPSAL
@empno int,
@Employee_Cursor CURSOR VARYING OUTPUT
FOR SELECT empno FROM AdventureworksDW.dbo.emp
AS
OPEN Employee_Cursor;
FETCH NEXT FROM Employee_Cursor into @empno;
WHILE @@FETCH_STATUS = 0
BEGIN
BEGIN TRAN
UPDATE emp set sal= sal+ 2000 where
empno = @empno and comm is null
mgr='Scott';
FETCH NEXT FROM Employee_Cursor into @empno;
COMMIT;
END;
CLOSE Employee_Cursor;
DEALLOCATE Employee_Cursor;

View Replies !

---

Stored Procedure Using A Declared Cursor
I need to write a stored procedure using T-SQL to declare a cursor for containing id(staff_no), names and specialism of all doctors that have specialism, The contents of the cursor then are to be displayed using a loop and print statement to give a formatted display of the output of each record within the cursor.

The doctors table has the following columns with specialism allowing NULL values

doctor
(
staff_no CHAR(3),
doctor_name CHAR(12),
position CHAR(15),
specialism CHAR(15),
PRIMARY KEY(staff_no)
)

Any help would be greatly appreciated.

View Replies !

---

Receiving And Sending A Cursor With(in) A Stored Procedure
Can someone post some code that shows a Stored Procedure receiving a cursor that it can process - lets say a group of order detail records are received that must be saved along with the single Order header record.

And, in another example, a SP returns a result set to the calling program. - For example, a particular sale receipt is pulled up on the screen and the order detail is needed.

Thanks for help on this,

Peter

View Replies !

---

Unique Cursor Name In Recursive Stored Procedure
How can I solve this probleM?

procedure XX
DECLARE cc CURSOR FOR SELECT....
OPEN cc
...
WHILE @@FETCH_STATUS = 0
BEGIN

View Replies !

---

Unique Cursor Name In Recursive Stored Procedure
How can I solve this probleM?
I thing that I need to create cursor with unique cursor name

procedure XX param
DECLARE cc CURSOR FOR SELECT....param --ERROR bcause it's already exists
OPEN cc
...
WHILE @@FETCH_STATUS = 0
BEGIN
XX param
FETCH NEXT ...
END
CLOSE cc
....

View Replies !

---

Stored Procedure Cursor Problem URGENT
Hi,

I have created the following stored procedure to get the text from one table and compare with them with another table and the one's that match will assign the corresponding ID. But the problem is that it only assigns the last id in the table from the main table which new_cur2 holds. So the problem is that its not updating with the correct ID its just updating with the last ID the cursor holds. Does any one know what it could be.....I think it may just be a little coding error....thanks

CREATE PROCEDURE [MYSP] AS

Declare @pdesc nvarchar(30)
Declare @ssc int
Declare @myid int
Declare @name nvarchar(30)

Declare new_cur CURSOR DYNAMIC FOR
SELECT ProductDescription, SubSubCatID
FROM C2000HPB
FOR UPDATE

Open new_cur
FETCH FROM new_cur INTO @pdesc, @ssc
While @@FETCH_STATUS = 0

BEGIN
Declare new_cur2 CURSOR DYNAMIC FOR
SELECT SubSubCatID, SubSubCategory FROM SSC
FOR READ ONLY

Open new_cur2
FETCH FROM new_cur2 INTO @myid, @name
While @@FETCH_STATUS = 0

BEGIN
IF PATINDEX ('@name%',@pdesc) = 0
Set @ssc = @myid
UPDATE C2000HPB
SET SubSubCatID = @ssc
FETCH NEXT FROM new_cur2 INTO @myid, @name

END

Close new_cur2
DEALLOCATE new_Cur2
FETCH NEXT FROM new_cur INTO @pdesc,@ssc
END
Close new_cur
DEALLOCATE new_Cur

View Replies !

---

Make A Dynamic Cursor In A Stored Procedure
I need im my aplication to meke a "Cursor" in a execution of a stored procedure.

For sample:

In a table with a report definition I have the "Fileds, From, Group, Order " clausulas and  I need make a cursor with  a contents of this fileds.

How can I do ???

My code:

Declare @idRelat int, @cmd_FROM nvarchar(1024), @cmd_Det nvarchar(50)
SELECT @idRelat = idRelat, @cmd_Det = cmd_DET
FROM Relatórios WHERE Nome = @p_Relat

Declare @Tot_Col smallint, @Tot_Lin smallint, @Campos smallint,
  @Aux_Select nvarchar(1024), @Aux_Group nvarchar(1024), @Aux_Order nvarchar(1024)

Select @Tot_Col = 0
Select @Tot_Lin = 0
Select @Campos = 0
Select @Aux_Select = "SELECT " + @cmd_DET + "AS Soma"
Select @Aux_Group = "GROUP BY "
Select @Aux_Order = "ORDER BY "
Declare @a_Local char(1), @a_Linha smallint, @a_Campo nvarchar(50)
Declare cur_Aux insensitive cursor for
  SELECT Local, Linha, Campo
  From Relatórios_Margens
  WHERE (idRelat = @idRelat)
  ORDER BY Local, Linha
Open cur_Aux
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
While @@FETCH_status = 0 begin
  If @a_Local = "C"
    Select @Tot_Col = @Tot_Col + 1
  Else
    Select @Tot_Lin = @Tot_Lin + 1
  Select @Campos = @Campos + 1
  If @Aux_Group <> "GROUP BY " begin 
    Select @Aux_Group = @Aux_Group + ", "
  If @Aux_Order <> "ORDER BY " begin 
    Select @Aux_Order = @Aux_Order + ", "
  Select @Aux_Select = sSelect + ", " + @a_Campo + " AS Campo" + @Campos
  Select @Aux_Group = @Aux_Group + @a_Campo
  Select @Aux_Order = @Aux_Order + @a_Campo
  Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
End
Select @Aux_Select = @Aux_Select
-- <<<< MONTA COMANDO SQL
Select @Aux_Select = @Aux_Select + " " + @cmd_FROM + " " + @p_Filtro + " " + @Aux_Group + " " + @Aux_Order
Declare @Cursor_Aux cursor
Set @Cursor_Aux = cursor for @Aux_Select
Open @Cursor_Aux

Not working !!!!

 

View Replies !

---

How To Call A Stored Procedure In T-SQL And Pass It To A Cursor
Hi,
 
I have a kind of problem. In SQL Server I have a stored procedure ressembling this:
 



Code Block
ALTER PROCEDURE procedure1
(

@param int
)
 
SELECT * FROM table WHERE param = @param
 
 


Now I want to call this procedure and pass it to a cursor. We all know you can do this:



Code Block
 
DELCARE cursor1 CURSOR for
SELECT * FROM table WHERE param = @param
 
 

.. , but I want something like this:
 



Code Block
DECLARE cursor1 CURSOR for
EXEC procedure1 @param
 
 


Is it possible? I could solve it in another, but then I have to connect 2x to the database, which is less performant.
 
I have also tried something like this:
 



Code Block
ALTER PROCEDURE procedure1
(

@param int
)
SELECT @test = id FROM table WHERE param = @param
RETURN @test
 
ALTER PROCEDURE procedure2
(

@param int
)
DECLARE @var varchar(100)
EXEC @var = procedure1 @param
 
 


But then it returns always 0.
 
So is there a way to pass a procedure's select to a cursor?
 
Thanks in advance
 
Stevevil0
 
 

View Replies !

---

Problem When Invoking Stored Procedure With Cursor From Inside .net
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,

View Replies !

---

Cursor Works In Query Analyzer But Not In Stored Procedure
 

Hi i have a script works in sql query analyzer;
 

declare @id decimal


declare mycur CURSOR SCROLL  for select myRowID from myTable order by myRowID
open mycur;

Fetch ABSOLUTE  30 from mycur into  @id
close mycur;
deallocate mycur;

select @id
this script turns me a value.
 
i create a stored procedure from above script and its syntax is ok;
CREATE PROCEDURE SELECT_MyRow
 AS
declare @cur cursor
declare @RowID decimal
set @cur = CURSOR SCROLL 
for select myRowID from myTable order by myRowID
open @cur
Fetch ABSOLUTE  30 from @cur into  @RowID
close @cur
deallocate @cur
select @RowID
GO
 
my c# code using stored procedure is below;
 





Code Snippet
try
{

OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection);
cmd.CommandType = CommandType.StoredProcedure;
myconnection.Open();
OleDbDataReader reader = cmd.ExecuteReader();
MessageBox.Show(reader.GetName(0));//here fails
while (reader.Read())
{

MessageBox.Show(reader.GetDecimal(0).ToString());
}
reader.Close();
myconnection.Close();
}
catch(Exception ex)
{

MessageBox.Show(ex.Message);
}
 
 
The code above fails because reader reads no values, error message is "No data exists for the row/column"
but i know exists. Can anyone help me, what is the difference between stored procedure and script ?

View Replies !

---

@@Identity In Stored Procedure
Hi,I have a stored procedure  that insert data into 2 temp tables. The problem that I have is when I insert a data into a first table, how do I get the @@identity value from that table and insert it into the second table?? The following code is what I have:Create #Temp1    @StateID Identity,    @State nvarchar(2),    @wage moneyINSERT INTO #Temp1 (State, wage)SELECT State, Wage FROM Table1 INNER JOIN Table2 ON Table1.Table1_ID = Table2.Table2_IDCreate #Temp2    @ID Identity    @EmployeeID int        @StateID Int    @Field1 Money    @Field2 MoneyINSERT INTO #Temp2 (EmployeeID, StateID, Field1, Field2)SELECT EmployeeID, StateID, Field1, Field2 FROM SomeTable 

So, The first part I created a #Temp1 table and insert data into the table. Then after the insert, I want the @@Identity value and insert into the #Temp2 table. This is my first time doing stored procedure, so, I am wondering how do I retrieve the @@identity value and put into the second select statement. Please help. ahTan 

View Replies !

---

Set Identity Not Working For Stored Procedure
Hi can someone tell me whats wrong with this stored procedure. All im trying to do is get the publicationID from the publication table in order to use it for an insert statement into another table. The second table PublicaitonFile has the publicaitonID as a foriegn key.
Stored procedure error: cannot insert null into column publicationID, table PublicationFile - its obviously not getting the ID.
ALTER PROCEDURE dbo.StoredProcedureUpdateDocLocField
@publicationID Int=null,@title nvarchar(MAX)=null,@filePath nvarchar(MAX)=null
ASBEGINSET NOCOUNT ON
IF EXISTS (SELECT * FROM Publication WHERE title = @title)SELECT @publicationID = (SELECT publicationID FROM Publication WHERE title = @title)SET @publicationID = @@IDENTITYEND
IF NOT EXISTS(SELECT * FROM PublicationFiles WHERE publicationID = @publicationID)BEGININSERT INTO PublicationFile (publicationID, filePath)VALUES (@publicationID, @filePath)END
 

View Replies !

---

Problem With @@IDENTITY In Stored Procedure
Hello !
I just can't access @@IDENTITY in my requests !Here is my stored procedure : (I removed a few lines for clarity)set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[AssignerLicence]
(
@Apprenant int = 0
)
AS
BEGIN
SET NOCOUNT ON;

DECLARE @NBLICENCES int
DECLARE @COMMANDEID int
DECLARE @LICENCEID int

SET @NBLICENCES = (SELECT SUM(commande_licences_reste)
FROM Commande
WHERE commande_valide = 1)

IF
@NBLICENCES > 0
BEGIN

UPDATE Commande
SET commande_licences_reste = (commande_licences_reste - 1)
WHERE commande_id =
(SELECT TOP 1 C_min.commande_id
FROM Commande AS C_min
WHERE C_min.commande_licences_reste > 5
ORDER BY C_min.commande_licences_reste ASC,
C_min.commande_date ASC);

SET @COMMANDEID = @@IDENTITY

INSERT INTO Licence (licence_date_debut, commande_id)
VALUES (GETDATE(), @COMMANDEID)

SET @LICENCEID = @@IDENTITY

UPDATE Apprenant
SET licence_id = @LICENCEID
WHERE apprenant_id = @Apprenant

END

END
But it always throws an error saying that I can't insert null into commande_id (basically, I think @@IDENTITY isn't executed at all)
Any idea why it doen't works ?
Thanks !

View Replies !

---

Stored Procedure And Assigning @@IDENTITY Value
In the following stored procedure I would like to test whether @TopCategoryID is null. If so I would like to insert the @CategoryID value into the @TopCategoryID value. So, once @CategoryID recieves the @@IDENTITY value, how do I enter this same value into @TopCategoryID as well???



CREATE PROCEDURE sp_CT_InsertCategory



@Namevarchar(50),
@Description varchar(250),
@topCategory bit,
@ParentCategoryID int,
@TopCategoryID int,
@CategoryID int OUTPUT
AS
DECLARE @CurrID int


IF @CurrID IS NULL
BEGIN

INSERT
INTO CT_Category
(CategoryName, CategoryDescription, topcategory, parentcategoryid, topcategoryid)
VALUES
(@Name, @Description, @topcategory, @ParentCategoryID, @TopCategoryID)

SET @CategoryID = @@IDENTITY

IF @@ERROR > 0
BEGIN

RAISERROR ('Insert of Category failed', 16, 1)
RETURN 99

END

END
ELSE
BEGIN

SET @CategoryID = -1

END
GO



Thanks in advance

View Replies !

---

IDENTITY Values In A Stored Procedure
Hi All,
This is my stored procedure

CREATE PROCEDURE testProc AS
BEGIN
CREATE TABLE #tblTest(ID INT NOT NULL IDENTITY, Col1 INT)
INSERT INTO #tblTest(Col1)
SELECT colA FROM tableA ORDER BY colA

END


This is my simple procedure, I wanted to know whether the IDENTITY values created in #tblTest will always be consistent, I mean without losing any number in between. i.e. ID column will have values 1,2,3,4,5.....
or is there any chance of ID column having values like 1,2, 4, 6,7,8....

Please reply...
qa

View Replies !

---

Return Identity In Stored Procedure
I have a stored procedure where I am passing in several strings which are concatenated to form an Insert SQL statement. I then return the identity value from the insert - problem is, the identity value is coming back NULL.

Here is the sp. Any ideas?

CREATE PROCEDURE sp_ExecuteInsert
@pIdentity int OUTPUT,
@pSQL1 varchar(255),
@pSQL2 varchar(255) = NULL,
@pSQL3 varchar(255) = NULL,
@pSQL4 varchar(255) = NULL,
@pSQL5 varchar(255) = NULL,
@pSQL6 varchar(255) = NULL,
@pSQL7 varchar(255) = NULL,
@pSQL8 varchar(255) = NULL
AS

EXECUTE (@pSQL1 + @pSQL2 + @pSQL3 + @pSQL4 + @pSQL5 + @pSQL6 + @pSQL7 + @pSQL8)

SELECT @pIdentity = @@IDENTITY
GO

FYI, the real problem I am trying to solve is simply to return the identity after an insert. I could write a simple insert sp that returns the identity, but my code is written to handle generic situations and build an INSERT statement as needed. So if there are any other ideas of executing an insert statement and getting the identity, please let me know.

Thanks...

View Replies !

---

Stored Procedure Conditionally Using @@Identity
Im having a play using @@identity

I want to insert some data into a table

Get the AutoID value on the inserted data

then insert some other data into another table
and set its id value to the captured @@identity

My question
I only want to do the second insert only if
@FieldValue2 contains a value ie not empty

below is a basic procedure without conditonal part



Code:

CREATE PROCEDURE conditional_Insert

@FieldID As int,
@FieldValue As Nvarchar(50),
@FieldValue2 As Nvarchar(50)
AS

declare @id int

set nocount on

INSERT INTO Table1(fieldID,fieldvalue)
VALUES( @FieldID, @FieldValue)

set @id = @@identity

INSERT INTO Table2(fieldID2, FieldValue2)
VALUES(@id, @FieldValue2)

select @id
GO

View Replies !

---

Stored Procedure With CURSOR OUTPUT Parameter, Using JDBC And A Callable Statement
My server is MS Sql Server 2005.  I'm using com.microsoft.sqlserver.jdbc.SQLServerDriver as the driver class.  I've established a connection to the database.

I'm trying to invoke a stored procedure using JDBC and a callable statement.  The stored procedure has a parameter @CurOut CURSOR VARYING OUTPUT.  How do I setup the callable statement so the output parameter is accepted by the driver?

I'm not really trying to pass a cursor up to the database Server but I'm wanting a cursor back from the stored procedure that is other than the result set or other value the stored procedure returns.

First problem: What java.sql.Types (or SQL Server specific) value do I specify for the out parameter I'm registering on the CallableStatement?

Second problem: What do I set the value of the parameter to?

The code looks like:

CallableStatement cstmt = myConnection.prepareCall(sQuery);

cstmt.registerOutParameter(1, Types.OTHER); // What is the right type?

cstmt.setNull(1, Types.OTHER); // What is the right type?

if (cstmt.execute()) {

 ResultSet rs = cstmt.getResultSet();

}

Execution results in a NullPointerException from the driver.

What am I doing wrong?

Thanks for your assistance.

Jon Weaver

View Replies !

---

How Do I Return The Identity From Stored Procedure To Asp.net Code Behind Page?
how do i return the identity from stored procedure to asp.net code behind page?
CREATE PROCEDURE [dbo].[myInsert] ( @Name varchar(35),   @LastIdentityNumber int output)AS insert into table1 (name) values (@name)
DECLARE @IdentityNumber intSET @IdentityNumber = SCOPE_IDENTITY()SELECT @IdentityNumber as LastIdentityNumber
code behind:
public void _Insert(
string _Name,
{
DbCommand dbCommand = db.GetStoredProcCommand("name_Insert");db.AddInParameter(dbCommand, "name", DbType.String, _userId);
db.AddParameter(dbCommand, "@IdentityNumber", DbType.Int32, ParameterDirection.Output, "", DataRowVersion.Current, null);
db.ExecuteNonQuery(dbCommand);
int a = (int)db.GetParameterValue(dbCommand,"@IdentityNumber");
whats wrong with to the above code?
 

View Replies !

---

Problem With Stored Procedure And Retrieving Inserted Identity Value
Hello!I use a procedure to insert a new row into a table with an identitycolumn. The procedure has an output parameter which gives me theinserted identity value. This worked well for a long time. Now theidentity value is over 700.000 and I get errors whiles retrieving theinserted identitiy value. If I delete rows and reset the identityeverything works well again. So I think it is a data type problem.My Procedure:create procedure InsertProduct@NEWID int outputasbeginset nocount oninsert into PRODUCT(D_CREATED)values(getdate()+'')set nocount offselect @NEWID = @@IDENTITYendMy C# code:SqlCommand comm = new SqlCommand("InsertProduct", sqlCon);comm.CommandType = CommandType.StoredProcedure;comm.Parameters.Add(new SqlParameter("@NEWID",System.Data.SqlDbType.Int)).Direction =System.Data.ParameterDirection.Output;try{SqlDataReader sqlRead = comm.ExecuteReader();object o = comm.Parameters["@NEWID"].Value;//...}catch ( Exception ex ){throw ex;}The object o is alwaya System.DbNull. I also tried to use bigint.Any hints are welcomeCiaoSusanne

View Replies !

---

Replicating Tables With An Identity Column Fails Even With Custom Stored Procedure
When replicating a table which has an identity column I get the error: "Procedure cp_insert_tblname expects parameter @C1, which was not supplied.". The stored procedure appears to be called without any parameters so my insert stored procedure does not work. I know I'm missing something basic here!! Do I have to add the field names when telling replication to use a custom stored procedure. If not, how do arguments get passed to my SP, as globals somehow?

Any info greatly appreciated!!
Thanks,
Jay

View Replies !

---

Insert Row In Table With Identity Field, And Get New Identity Back
I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table). 

What is the most direct way to do this in SSIS?

 

TIA,

 

barkingdog

 

P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?

 

View Replies !

---

PRINT Debug Messages And CURSOR In Stored Procedure Confuses DTS; &"Invalid Pointer&"
I have the following stored procedure that is called from the source ofa transformation in a DTS package. The first parameter turns on PRINTdebug messages. The second, when equals 1, turns on the openning,fetching, and closing of a cursor. Things are fine if only one of thetwo parameters was set to 1.When run with both parameters turned on, "dba_test_dts 1, 1", DTSsource (tab) preview fails because it thinks no row was returned. "Norowset was returned from the SQL statement". Understanbly then thetransformation step would also fail with the "Invalid Pointer" error.As you'd see, I have SET NOCOUNT ON in the code. Has anyoneexperienced this? Is this a known bug? This occurs in SQL Server 2000running on Windows Server 2003.-----------------------------------------------------------------------------------------------------------------CREATE PROC dba_test_dts ( @debug BIT = NULL, @cur BIT = NULL )AS-- Always have these 2 options set or unset so DTS would not error out-- with the Invalid Pointers message.SET NOCOUNT ONSET ANSI_WARNINGS OFFDECLARE @FMT_FILE_NAME VARCHAR(256)DECLARE @OUTPUT_FILE_NAME VARCHAR(256)DECLARE @emp_id INTDECLARE @lastname VARCHAR(70)IF ( @debug = 1 )BEGINPRINT '=== BEGIN ==='PRINT 'Stored Procedure dts_calling_stored_proc'PRINT 'Begin timestamp: ' + CONVERT(VARCHAR(32), CURRENT_TIMESTAMP,109 )PRINT 'Server : ' + @@SERVERNAMEPRINT 'Host Name/ID : ' + HOST_NAME() + '/' + CONVERT(VARCHAR(32),HOST_ID())PRINT 'Database : ' + DB_NAME()PRINT 'User/NT User : ''' + USER_NAME() + '''/''' + SYSTEM_USER +''''PRINT 'DEBUG FLAG : ' + CONVERT( CHAR(1), @DEBUG )PRINT '=== BEGIN ==='PRINT SPACE(1)ENDIF ( EXISTS ( SELECT 1 FROM sysobjects WHEREid=object_id(N'Employees_temp') ) )DROP TABLE Employees_tempCREATE TABLE Employees_temp(emp_id INTEGER, lastname VARCHAR(70))INSERT INTO Employees_temp([emp_id],[lastname])SELECT EmployeeID, lastnameFROM EmployeesIF ( @cur = 1 )BEGINDECLARE curEmp CURSOR FORSELECT emp_id, lastnameFROM Employees_tempOPEN curEmpFETCH NEXT FROM curEmpINTO@emp_id, @lastnameWHILE ( @@FETCH_STATUS = 0 )BEGINFETCH NEXT FROM curEmpINTO@emp_id, @lastnameENDCLOSE curEmpDEALLOCATE curEmpENDSELECT emp_id, lastnameFROM Employees_tempGO

View Replies !

---

Insert Using Stored Procedure
I have a table with UserID, UserName, UserPassword
I have a stored procedure as follows:ALTER PROCEDURE UserInsert
@UserName varchar(50),
@UserPassword varchar(50)
AS
BEGIN
INSERT Users (UserName, UserPassword)
VALUES (@UserName, @UserPassword)
END
I have a GridView bound to the Users Table and seperate textboxes (UserName, UserPassword) on a webform. 
Couple of Questions...
1. how and/or what code do I use to execute the Stored Procedure to insert what is in the textboxes into the Table using a button click event?
2. Since UserID is autogenerated on new records....does UserID need to be in the code?
Many Thanks

View Replies !

---

Two Insert In One Stored Procedure
Hi,
I have two tables "people' and "dept". What I need is a stored procedure to insert into both tables.
I need first, insert into "people" table, and then, insert into "dept" table since the first insert returns people id(peo_id), which
is an input parameter for "dept" table.
Here is my stored procedure, but I got error:Create PROCEDURE [dbo].[insert_people]
@peo_last_name varchar(35),
@peo_mid_initial varchar(1) = null,@peo_first_name varchar(10),
@peo_address1 varchar(50) = null,
@peo_city varchar(30) = null,
@peo_state varchar(2) = null,
@peo_zip varchar(10) = null,
@peo_ph1 varchar(30) = null,
@peo_ph2 varchar(30) = null,
@peo_email varchar(40) = null,
@dept_id int, @peo_id int
 
AS
SET @peo_id = (INSERT INTO people (peo_last_name, peo_mid_initial, peo_first_name, peo_address1, peo_city, peo_state, peo_zip, peo_ph1, peo_ph2, peo_email)
VALUES (@peo_last_name, @peo_mid_initial, @peo_first_name, @peo_address1, @peo_city, @peo_state, @peo_zip, @peo_ph1, @peo_ph2, @peo_email))
INSERT INTO dept (dept_id, peo_id)
VALUES (@dept_id, @peo_id)
GO
Could somebody help out?
Thanks a lot!

View Replies !

---

Using Insert Stored Procedure With C#
I'm trying to insert the details in the "registration form" using stored procedure to my table. My stored procedure is correct, but I dunno what is wrong in my code or I dunno whether I've written correct code. My code is below. Please let me know what is wrong in my code or my code is itself wrong..... protected void RegisterSubmitButton_Click(object sender, EventArgs e)    {               SqlConnection conn = new SqlConnection("Server=ACHUTHAKRISHNAN; Initial Catalog=classifieds;Integrated Security=SSPI");        SqlCommand cmd;        cmd = new SqlCommand("registeruser", conn);        SqlParameter par = null;        par= cmd.Parameters.Add("@fname", SqlDbType.VarChar, 30);        par.Value = RegisterFirstNameTextBox;        par = cmd.Parameters.Add("@lname", SqlDbType.VarChar, 30);        par.Value = RegisterLastNameTextBox;        par = cmd.Parameters.Add("@uname", SqlDbType.VarChar, 30);        par.Value = RegisterUserNameTextBox;        par = cmd.Parameters.Add("@pwd", SqlDbType.VarChar, 20);        par.Value = RegisterPasswordTextBox;        par = cmd.Parameters.Add("@email", SqlDbType.VarChar, 40);        par.Value = RegisterEmailAddressTextBox;        par = cmd.Parameters.Add("@secque", SqlDbType.VarChar, 50);        par.Value = RegisterSecurityQuestionDropDownList;        par = cmd.Parameters.Add("@secans", SqlDbType.VarChar, 40);        par.Value = RegisterSecurityAnswerTextBox;        try        {            conn.Open();            cmd.ExecuteNonQuery();        }        catch (Exception ex)        {            throw new Exception("Execption adding account. " + ex.Message);        }        finally        {            conn.Close();    } }

View Replies !

---

Help With Insert Stored Procedure
I'm trying to make sure that a user does not allocate more to funds than they have to payments. Here is what my stored procedure looks like now: I listed th error below
ALTER PROCEDURE [dbo].[AddNewFundAllocation] @Payment_ID Int,@Receipt_ID Int,@Fund_ID Int,@Amount_allocated money,@DateEntered datetime,@EnteredBy nvarchar(50)ASSELECT     (SUM(tblReceiptsFunds.Amount_allocated) + @Amount_allocated) AS total_allocations, Sum(tblReceipts.AmountPaid) as total_paymentsFROM         tblReceiptsFunds INNER JOIN                      tblReceipts ON tblReceiptsFunds.Receipt_ID = tblReceipts.Receipt_IDWHERE tblReceipts.Payment_ID=@Payment_IDIF (total_allocations<total_payments)INSERT INTO tblReceiptsFunds ([Receipt_ID],[Fund_ID],[Amount_allocated],DateEntered,EnteredBy)

Values (@Receipt_ID,@Fund_ID,@Amount_allocated,@DateEntered,@EnteredBy)

ELSE BEGIN
PRINT 'You are attempting to allocate more to funds than your total payment.'
END I get the following error when I try and save the stored procedure:
Msg 207, Level 16, State 1, Procedure AddNewFundAllocation, Line 26
Invalid column name 'total_allocations'.
Msg 207, Level 16, State 1, Procedure AddNewFundAllocation, Line 26
Invalid column name 'total_payments'.

View Replies !

---

Insert Stored Procedure Help
OK I have a stored procedure that inserts information into a database table.  Here is what I have so far:
I think I have the proper syntax for inserting everything, but I am having problems with two colums.  I have Active column which has the bit data type and a Notify column which is also a bit datatype.  If I run the procedure as it stands it will insert all the information correctly, but I have to manually go in to change the bit columns.  I tried using the set command, but it will give me a xyntax error  implicating the "=" in the Active = 1 How can I set these in the stored procedure?1 SET ANSI_NULLS ON
2 GO
3 SET QUOTED_IDENTIFIER ON
4 GO
5 -- =============================================
6 -- Author:xxxxxxxx
7 -- Create date: 10/31/07
8 -- Description:Insert information into Registration table
9 -- =============================================
10 ALTER PROCEDURE [dbo].[InsertRegistration]
11
12 @Name nvarchar(50),
13 @StreetAddress nchar(20),
14 @City nchar(10),
15 @State nchar(10),
16 @ZipCode tinyint,
17 @PhoneNumber nchar(20),
18 @DateOfBirth smalldatetime,
19 @EmailAddress nchar(20),
20 @Gender nchar(10),
21 @Notify bit
22
23 AS
24 BEGIN
25 -- SET NOCOUNT ON added to prevent extra result sets from
26 -- interfering with SELECT statements.
27 SET NOCOUNT ON;
28
29 INSERT INTO Registration
30
31 (Name, StreetAddress, City, State, ZipCode, PhoneNumber, DateOfBirth, EmailAddress, Gender, Notify)
32
33 VALUES
34
35 (@Name, @StreetAddress, @City, @State, @ZipCode, @PhoneNumber, @DateOfBirth, @EmailAddress, @Gender, @Notify)
36
37 --SET
38 --Active = 1
39
40 END
41 GO
 

View Replies !

---

INSERT INTO With Stored Procedure
Having problem do INSERT values to my SQL DB with an StoredProcedure. SELECT works fine.
My StoredProcedure :
CREATE PROCEDURE insert_test
@id  int ,@Rubrik char(25), @Info  char(60) , @Datum datetime
ASINSERT INTO test_news(ID, Rubrik, Info, Datum) VALUES (@id, @Rubrik, @Info, @Datum)GO
The StoredProcedure  works fine in the SQL Query Analyzer
 
My Code;
int num= 1234; string rub = "KLÖKÖLKÖLKÖL"; string ino = "slökdjfkasdkfjsdakf";SqlConnection myConnection = new SqlConnection("server='SOLDANER\DAER'; trusted_connection=true; database='SeWe'");
SqlCommand myCommand = new SqlCommand("insrt_test", myConnection);
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.Add( "@id",num);myCommand.Parameters.Add( "@Rubrik",rub );myCommand.Parameters.Add( "@Info", ino);myCommand.Parameters.AddWithValue( "@Datum", DateTime.Now );
 Even tried AddWithValues
Dont get any error.....

View Replies !

---

Stored Procedure Insert
Hi,
I am having trouble inserting 2 fields in a row using a stored procedure.
This works fine:
Exec ('Insert Into NumbersPull (Number)'+ @SQL)
but when I try to insert another value into field 2 it errors out:
I try this:
Exec ('Insert Into NumbersPull
(Number,resultID) Select ('+ @SQL
+ '),' + @resultID'
)
and get this error:
ERROR: Line 2: Incorrect syntax near ')'.
Thanks,
Doug

View Replies !

---

Using Insert Into ... Stored Procedure...
Hi,
I need to insert a new user if the user (user_login) does not exist in the table (abcd_user) using a stored procedure.
I created a stored procedure called "insert_into_abcd_user". Here is the complete strored procedure...
CREATE PROCEDURE [dbo].[insert_into_abcd_user] (     @first_name  [VARCHAR](30),      @last_name  [VARCHAR](30),      @email  [VARCHAR](60),      @user_login [VARCHAR](50))  AS INSERT INTO [dbo].[abcd_USER] ([first_name],  [last_name],  ,  [user_login])VALUES (@first_name,  @last_name,  @email,  @user_login)
I need to to insert a new user if the user (user_login) does not exist int the table (abcd_User).
Any one shade on my code?
I appreciate your help in advance.
 
-- Srinivas Gupta.

View Replies !

---

INSERT INTO ... From A Stored Procedure
For example:

INSERT INTO Table_1
SELECT
Source_Table.Field_1,
Source_Table.Field_2,
Source_Table.Field_3,
???? OUTPUT parameter returnet from a stored procedure ???????
FROM Source_Table

Is posible this ?

View Replies !

---

Insert Stored Procedure
Mistake sorry

View Replies !

---

INSERT INTO.. A Stored Procedure!
I have created a stored procedure which simply inserts two records into a table. Here is my stored procedure:-
//BEGIN
ALTER PROCEDURE [dbo].[pendingcol]
@cuser varchar(100)
AS
Declare @sqls nvarchar(1000)

SELECT @sqls = 'INSERT INTO' + @cuser + '(UserName, Pending) VALUES ("recordone", "recordtwo")'

EXECUTE sp_executesql @sqls

RETURN
//END

This is the code i am using to call my stored procedure using VB.NET:-
//BEGIN
'variables
Dim user As String
user = Profile.UserName

'connection settings
Dim cs As String
cs = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|friends.mdf;Integrated Security=True;User Instance=True"
Dim scn As New SqlConnection(cs)

'parameters
Dim cmd As New SqlCommand("pendingcol", scn)
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@cuser", SqlDbType.VarChar, 1000)
cmd.Parameters("@cuser").Value = user

'execute
scn.Open()

cmd.ExecuteNonQuery()

scn.Close()
//END

Now when i execute this code i get an error point to cmd.ExecuteNonQuery() that says
" The name "recordone" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted. "

As far as i can see theres nothing wrong with the VB code, im guessing that the problem lies somewhere in my stored proc!

Can anyone please enlighten me on where i may be going wrong?
Cheers

View Replies !

---

Help Cursor Based Stored Procedure Is Getting Slower And Slower!
I am begginner at best so I hope someone that is better can help.I have a stored procedure that updates a view that I wrote using 2cursors.(Kind of a Inner Loop) I wrote it this way Because I couldn'tdo it using reqular transact SQL.The problem is that this procedure is taking longer and longer to run.Up to 5 hours now! It is anaylizing about 30,000 records. I thinkpartly because we add new records every month.The procedure works like this.The first Cursor stores a unique account and duedate combination fromthe view.It then finds all the accts in the view that have that account duedatecombo and loads them into Cursor 2 this groups them together for datamanipulation. The accounts have to be grouped this way because aaccount can have different due dates and multiple records within eachaccount due date combo and they need to be looked at this way aslittle singular groups.Here is my procedure I hope someone can shead some light on this. Myboss is giving me heck about it. (I think he thinks Girls cant code!)I got this far I hope someone can help me optimize it further.CREATE PROCEDURE dbo.sp_PromiseStatusASBEGINSET NOCOUNT ON/* Global variables */DECLARE @tot_pay moneyDECLARE @rec_upd VARCHAR(1)DECLARE @todays_date varchar(12)DECLARE @mActivityDate2_temp datetimeDECLARE @tot_paydate datetime/* variables for cursor ACT_CUR1*/DECLARE @mAcct_Num1 BIGINTDECLARE @mDueDate1 datetime/* variables for ACT_CUR2 */DECLARE @mAcct_Num2 BIGINTDECLARE @mActivity_Date2 datetimeDECLARE @mPromise_Amt_1 moneyDECLARE @mPromise_Status varchar(3)DECLARE @mCurrent_Due_Amt moneyDECLARE @mDPD intDECLARE @mPromise_Date datetimeSELECT @todays_date =''+CAST(DATEPART(mm,getdate()) AS varchar(2))+'/'+CAST(DATEPART(dd,getdate()) AS varchar(2))+'/'+CAST(DATEPART(yyyy,getdate()) AS varchar(4))+''DECLARE ACT_CUR1 CURSOR FORSELECT DISTINCTA.ACCT_NUM,A.DUE_DATEFROM VWAPPLICABLEPROMISEACTIVITYRECORDS AOPEN ACT_CUR1FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1WHILE (@@FETCH_STATUS = 0)BEGINSELECT @rec_upd = 'N 'DECLARE ACT_CUR2 CURSOR FORSELECTB.ACCT_NUM,B.ACTIVITY_DATE,B.PROMISE_AMT_1,B.PROMISE_STATUS,B.CURRENT_DUE_AMT,B.DAYS_DELINQUENT_NUM,B.PROMISE_DATE_1FROM VWAPPLICABLEPROMISEACTIVITYRECORDS B (UPDLOCK)WHERE B.ACCT_NUM = @mAcct_Num1ANDB.DUE_DATE = @mDueDate1ORDER BY B.ACCT_NUM,B.DUE_DATE,B.ACTIVITY_DATE,CASEB.Time_ObtainedWHEN 0 THEN 0ELSE 1END Desc, B.Time_ObtainedOPEN ACT_CUR2FETCH NEXT FROM ACT_CUR2INTO @mAcct_Num2 ,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateWHILE (@@FETCH_STATUS = 0)BEGIN----CHECK------------------------------------------------------------------------DECLARE @PrintVariable2 VARCHAR (8000)--SELECT @PrintVariable2 = CAST(@MACCT_NUM2 AS VARCHAR)+''+CAST(@MACTIVITY_DATE2 AS VARCHAR)+' '+CAST(@MPROMISE_AMT_1 ASVARCHAR)+' '+CAST(@MPROMISE_STATUS AS VARCHAR)+''+CAST(@mCurrent_Due_Amt AS VARCHAR)+' '+CAST(@mDPD AS VARCHAR)+''+CAST(@mPromise_Date AS VARCHAR)--PRINT @PrintVariable2----ENDCHECK------------------------------------------------------------IF @mDPD >= 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE < @mActivity_Date2 + 15----CHECK------------------------------------------------------------------------DECLARE @PrintVariable3 VARCHAR (8000)--SELECT @PrintVariable3 ='Greater=30 DOLLARS COLLECTED'--PRINT @PrintVariable3----ENDCHECK------------------------------------------------------------ENDELSE IF @mDPD < 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE BETWEEN @mActivity_Date2 AND@mPromise_Date + 5----CHECK----------------------------------------------------------------------DECLARE @PrintVariable4 VARCHAR (8000)--SELECT @PrintVariable4 ='Less 30 DOLLARS COLLECTED'--PRINT @PrintVariable4----END CHECK------------------------------------------------------------END----------------------------------------MY REVISEDLOGIC-------------------------------------------------------IF @rec_upd = 'N'BEGINIF @mDPD >= 30BEGINSELECT @mActivityDate2_temp = @mActivity_Date2 + 15--DECLARE @PrintVariable5 VARCHAR (8000)--SELECT @PrintVariable5 =' GREATER= 30 USING ACTVITY_DATE+15'--PRINT @PrintVariable5ENDELSE IF @mDPD < 30BEGINSELECT @mActivityDate2_temp = @mPromise_Date + 5--DECLARE @PrintVariable6 VARCHAR (8000)--SELECT @PrintVariable6 =' LESS 30 USING PROMISE_DATE+5'--PRINT @PrintVariable6ENDIF @tot_pay >= 0.9 * @mCurrent_Due_Amt--used to be promise amtBEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET PROMISE_STATUS = 'PK',TOTAL_DOLLARS_COLL = @tot_payWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PK.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDSELECT @rec_upd = 'Y 'ENDIF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay IS NULL)AND( @mActivityDate2_temp > @todays_date )--need to put 1dayof month here for snapshot9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'OP'WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto OP which is the original Activity Date.--The record will hold this date until it goes into PK,PB,orIP.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @mActivity_Date2WHERE CURRENT OF ACT_CUR2ENDENDELSE IF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay ISNULL)AND( @mActivityDate2_temp <= @todays_date )--need to put 1dayof month here for snapshot 9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'PB',TOTAL_DOLLARS_COLL = case when @tot_pay is nullthen 0 else @tot_pay endWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PB.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDENDELSE IF @rec_upd = 'Y'BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'IP',TOTAL_DOLLARS_COLL = 0WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto IP.IF @mPromise_Status NOT IN ('IP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDFETCH NEXT FROM ACT_CUR2 INTO @mAcct_Num2,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateENDCLOSE ACT_CUR2DEALLOCATE ACT_CUR2FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1ENDCLOSE ACT_CUR1DEALLOCATE ACT_CUR1SET NOCOUNT OFFENDGO

View Replies !

---

Execute Insert Stored Procedure
Hi,
 I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a  temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
 
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
 
please can someone point me in the right direction

View Replies !

---