Using Select Statement Result In If Statement Please Help
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
View Complete Forum Thread with Replies
Related Forum Messages:
Different Result Of Each Select Statement
Hi, I execute a select statement SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008' every times I execute it I get different result. 1st result : 17036986 2nd result : 17037903 3rd result : 17038309 Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.
View Replies !
Get Numeric Result From SELECT Statement
Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,Mário Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);
View Replies !
Aggregate Function For Select Statement Result?
Ok, for a bunch of cleanup that i am doing with one of my Portal Modules, i need to do some pretty wikid conversions from multi-view/stored procedure calls and put them in less spid calls. currently, we have a web graph that is hitting the sql server some 60+ times with data queries, and lets just say, thats not good. so far i have every bit of data that i need in a pretty complex sql call, now there is only one thing left to do. Problem: i need to call an aggregate count on the results of another aggregate function (sum) with a group by. *ex: select count(select sum(Sales) from ActSales Group by SalesDate) from ActSales This is seriously hurting me, because from everything i have tried, i keep getting an error at the second select in that statement. is there anotherway without using views or stored procedures to do this? i want to imbed this into my mega sql statement so i am only hitting the server up with one spid. thanks, Tom Anderson Software Engineer Custom Business Solutions
View Replies !
Can A Column Be Derived Using Substring But The Parameters Are A Result Of A Select Statement?
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g. Table 1 Org aaa:aaa:aa aaa:aaa:ab aaa:aab:aa Table 2 delim Seg1Start Seg1Len Seg2Start Seg2Len Seg3Start Seg3Len : 1 3 5 3 9 2 My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work. Any ideas? Can this be done in SSIS? I'd really appreciate any insight that anyone might have. Regards, Bill
View Replies !
Select Statement Within Select Statement Makes My Query Slow....
Hello... im having a problem with my query optimization.... I have a query that looks like this: SELECT * FROM table1 WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998) it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View Replies !
Multiple Tables Used In Select Statement Makes My Update Statement Not Work?
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View Replies !
Using Conditional Statement In Stored Prcodure To Build Select Statement
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View Replies !
TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement
Hi guys, I have the query below (running okay): Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' FROM myTables WHERE Conditions are true ORDER BY Field01 The results are just as I need: Field01 Field02 ------------- ---------------------- 192473 8461760 192474 22810 Because other reasons. I need to modify that query to: Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' INTO AuxiliaryTable FROM myTables WHERE Conditions are true ORDER BY Field01 SELECT DISTINCT [Field02] FROM AuxTable The the results are: Field02 ---------------------- 22810 8461760 And what I need is (without showing any other field): Field02 ---------------------- 8461760 22810 Is there any good suggestion? Thanks in advance for any help, Aldo.
View Replies !
How To Write Select Statement Inside CASE Statement ?
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ? following part of the procedure clears my requirement. SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E can any one help me in this? please give me a sample query. Thanks and Regards, Kiran Suthar
View Replies !
Help With Delete Statement/converting This Select Statement.
I have 3 tables, with this relation: tblChats.WebsiteID = tblWebsite.ID tblWebsite.AccountID = tblAccount.ID I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement: SELECT * FROM tblChats c LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View Replies !
If STATEMENT Within Select Statement Syntax
Hi, I am a newbie to this site and hope someone can help.... I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is: if(TL_flag= '1', "yes") as [Trial Leave] it is coming up with an error.... I can use Select case but I should not need to as this should work? Any ideas?
View Replies !
Using Result Of SQL Statement
Hi, What I would like to do is run a select statement, and then have the result of the select be used/run thru the same select again untill it hits a certain where clause. This is for a where used search in our BOM (Bill of Material) table. So for example BOM 1 level 1 Item# 123 type Finished Good level 2 Item# 45 type subassembly level 3 Item# 56 type purchased item BOM 2 level 1 Item# 678 type Finished Good level 2 Item# 78 type subassembly level 3 Item#56 type purchased item So my input into the select statement would be Item# 56, it will then first find Item# 45 and Item# 78, but those I am not interested in. I want the select to then take Item#45 and Item#78 and run it thru the same select so that it will find Item#123 and Item#678. The select will know to stop there since these are flagged as "Finished Good" in our system, so they will not be in any other BOM. This is what I would imagine being specified in the "where clause". I can write the first part, where the select will find Item #45 and Item#78, but don't know how to get past that point. Any help or suggestions are greatly appreciated!! Thanks, Michiel
View Replies !
How Can I Get The Result Of A SQL PRINT Statement
I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long. I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result. I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.
View Replies !
Execute Same Statement For Each Value In Result Set
Hi everyone,My brain refuses to remember the (undocumented?) stored procedure I'mthinking of. It takes at least two parameters: a sql statement toexecute, and a table name (or something of that nature).Then, for each value in the table, it executes the sql statement andpasses the value as a parameter.Can anybody refresh my memory? The functionality may be slighlydifferent than described, but the principle is the same. Thanks verymuch...-Joe
View Replies !
The Statement Did Not Return A Result Set
I am using MSSQL 2000, SQL Server Developer Edition and product version is : 8.00.760 (SP3) Application Server: JBoss v 4.0.4 Driver : sql 2005 driver. Hi, I am running my application in JBOSS and hibernate to do all the query to the DB. While we are testing our application, it is working fine for the 1st day of stress testing, however after running for one days, it starts throwing the following exception. This can occur in a number of method call with no fixed pattern. Anyone has any idea what is going on? used by: org.hibernate.exception.GenericJDBCException: could not execute query at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103) at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43) at org.hibernate.loader.Loader.doList(Loader.java:2148) at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2029) at org.hibernate.loader.Loader.list(Loader.java:2024) at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:392) at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:333) at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172) at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1114) at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79) at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:756) at org.hibernate.ejb.QueryImpl.getSingleResult(QueryImpl.java:63) ... 88 more Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source) at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:236) at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186) at org.hibernate.loader.Loader.getResultSet(Loader.java:1669) at org.hibernate.loader.Loader.doQuery(Loader.java:662) at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224) at org.hibernate.loader.Loader.doList(Loader.java:2145) ... 97 more
View Replies !
Update Statement Works Ok But No Result
here is my update statement in a stored procedure: create proc proc_add_comp @comp_answer nvarchar(300), @admin nvarchar(100), @comp_id int as update tbComp set comp_answer = comp_answer + ' - ' + @admin + ', ' + @comp_answer where comp_id=@comp_id then I try it like this : exec proc_add_comp 'new answer','by me',1 result is : (1 row(s) affected) but when I look in the db, nothing was changed, comp_answer still has its old value.. comp_answer is nvarchar type column..isnt add operation allowed in update statement? thanks...
View Replies !
Using IF...Else Statement SELECT Statement
Hi All, Can some one point me in the right direction in how to construct my SQL query within my cursor? I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So: SELECT column_List FROM Table1 WHERE Table1_id = Table2_id so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log and do other statements if there is no match how do i add this condition to my statement either using an if...else statement proceeding to the next row? here is the statment i attempted to write: SELECT column_List FROM table1 WHERE Table1_id = Table2.id now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id IF table1.id <> table2.id BEGIN SET @DebugMessage = 'data not live.' RAISERROR (@DebugMessage, 16, 1) WITH LOG END essentially what i am trying to sayin my statement is: go to the first row check if it has a match in table 2, if there is no match execute a number of statements such as error loging e.t.c go to the next row repeat the previous statements ...i also looked through some Case...When statements am just not sure how to put in the condition thanks in advance
View Replies !
How To Pass Result From Case Statement To An Equation?
How to get the CASE results highlighted in BOLD into this equation; "(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked" ? Thank you. CREATE VIEW dbo.vwu_ReportViewASSELECT EmployeeID , LastName , FirstName , LocationCode , UserID , Today , Login , AMBreakOut , AMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) > = 50 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS AMBreak , LunchOut , LunchIn , CASE WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 66 THEN '0' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 67 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 81 THEN '15' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 82 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 96 THEN '30' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 97 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 111 THEN '45' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 112 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 126 THEN '60' ELSE '75' END AS LunchBreak, PMBreakOut , PMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 50 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS PMBreak , Logout , Comments , LoginLogon , AMBreakOutLogon , AMBreakInLogon , LunchOutLogon , LunchInLogon , PMBreakOutLogon , PMBreakInLogon , LogoutLogon ,(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked
View Replies !
How To Page SQL Query Result Returned From FOR XML Statement?
Gurus.I do not know if it is possible, but here is what I want to do.I want to allow user to page the SQL result, so he could decides toreturn from row 10 to row 20, or row 100 to 200, without returns thewhole resultset. Every time he sends another request, I do not mind tohit the database again, (I do not want to cache the result in themiddle tier server, scalability issue), and I know that I could achievethis with CURSOR, but unfortunately the FOR XML is not allowed in aCURSOR statement .(I know that I could achieve what I want to do by writing custom codein the middle tier, but I just want to see if there is a way to do thison the database side.)Any comments & suggestion is greatly appreciated.Thanks in advance.(I am using SQL2005)John
View Replies !
Get Insert Statement Result In Creating A Trigger
Hi, When a record is to be inserted, how can I check whether the insert is succeeded or not? CREATE TRIGGER MY_TRIGGER ON MyTable AFTER INSERT AS DECLARE @id INT DECLARE @name NVARCHAR(50) SELECT @id=id,@name=name FROM INSERTED BEGIN INSERT INTO MySubTable(id,name) VALUES(@id,@name) -- if failed, rollback END GO GO
View Replies !
SQLServerException: The Statement Did Not Return A Result Set When Sp Uses Cursors
I'm trying to migrate to the 2005 JDBC driver against SQL Server 2000, but I'm getting the following exception: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. This is similar problem to a past thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=413019&SiteID=1 The difference is that my stored procedure uses cursors. This same stored procedure works fine with the 2000 JDBC driver. Does anybody have any ideas how to resolve this problem?
View Replies !
Select Statement Problem - Group By Maybe Nested Select?
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View Replies !
SQL Select Statement To Select The Last Ten Records Posted
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
View Replies !
SQL Select Statement
I have a database that is constantly being added to... what im trying to do is select the 10 most recent entries EXCEPT for the very most recent. Selecting the 10 most recent is something I can do.... 'select top 10 * from tablename order by id desc' - but how do I leave out the most recent? SQL Server 2005
View Replies !
SELECT Statement
Hi,I'm sorry for the lame question, but I''m a newbie at C#.With the code that follows my signature, I'm trying to retrieve a single value from a table.The query is ok, I've tested manually.But I get the error:"The name userPassword does not exist in the current context".I realize it's a matter of scope, but I need to have the variable value available there.Furthermore, I think that I'm getting no result from the database with my code, because if I put the Response.Write(userPassword) line inside the while cicle, nothing is displayed.Any help would be appreciated.Warm Regards,Mário Gamito--SqlConnection myConn = new SqlConnection("user id=sa" + "password=secret" + "server=192.168.1.4" + "database=workers");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlDataReader myReader = null;SqlCommand myCommand = new SqlCommand("SELECT password FROM dbo.users WHERE email = 'gamito@foobar.lan'", myConn);myReader = myCommand.ExecuteReader();while(myReader.Read()) { string userPassword = myReader["password"].ToString()); }}catch (Exception e){ Console.WriteLine(e.ToString());}myConn.Close();Response.Write(userPassword);
View Replies !
Max Select Statement
Hi Guys, Having a little problem, can someone take a look at this... Thank You... Trying to get the Max(WebNameTitle) From Max(NumerID) Example code below throws error : I need the Max Value from the Column( WebNameTitle <---nvarchar) and the Max Value from the Column (NumberID <--int) New SqlCommand("Select Max(WebNameTitle) FROM ComBooks WHERE Max(NumberID) = MaxNumberID", conCommerce)
View Replies !
Select Statement In ASP.NET
hello all, I need to SELECT data in my ASP.NET web service from my MSSQLExpress database. I checked to INSERT data into it and it worked well , and here is the code of my insert: 1 <WebMethod()> _2 Public Function SaveNumName(ByVal UserNum As Integer, ByVal UserName As String)3 Dim DS As New SqlDataSource4 5 DS.ConnectionString = "Data Source=.SQLEXPRESS;Persist Security Info=True;Integrated Security=SSPI;Initial Catalog=tstSQL"6 ' DS.ConnectionString = ConfigurationManager.ConnectionStrings("tstSQLConnectionString1")7 DS.InsertCommandType = SqlDataSourceCommandType.Text8 DS.InsertCommand = "insert into tbl1 (number,name) values (@number,@name)"9 DS.InsertParameters.Add("number", UserNum)10 DS.InsertParameters.Add("name", UserName)11 12 DS.Insert()13 14 Return 115 End Function The previous code worked well for the insertion of data, but when I tryed the same technique with the selection of data, it didn't work, and here is my code for the select: 1 <WebMethod()> _2 Public Function GetName(ByVal Number As Integer)3 Dim Name As String4 'Dim ConnStr As String = "Data Source=.SQLEXPRESS;Persist Security Info=True;Integrated Security=SSPI;Initial Catalog=malalation_tstSQL"5 Dim GV As New GridView6 GV.Visible = False7 Dim DS As New SqlDataSource8 DS.ConnectionString = "Data Source=.SQLEXPRESS;Persist Security Info=True;Integrated Security=SSPI;Initial Catalog=tstSQL"9 10 DS.SelectCommandType = SqlDataSourceCommandType.Text11 DS.SelectCommand = "SELECT name from tbl1 where number = 1"12 ' DS.Select()13 GV.DataSource = DS14 Name = GV.Rows(0).Cells(1).Text15 Return Name16 End Function I think that the problem is with storing the result of the SELECT satatement, so what do you think??
View Replies !
Need Help With SELECT Statement
Hi, I have a table (SQL 2000) that holds inside login records of each system. All the systems logging 0-50 times each day. I need to create “Last Login� report that shows as following: SystemID LastLogin System001 2008-04-23 21:14:49 System002 2008-03-12 21:15:06 System003 2008-01-20 22:14:15 System004 2008-04-23 22:14:24 System005 2008-02-23 22:14:42 Need help with SELECT statement Thanks in advance. Alex
View Replies !
Select Statement
Hi Guys, I have some problem with sqlquery can any one help? Here is my statement strSQL=strSQL & "employee= "Select empname from tbl_emp where empname= strUname" when executing it says Expected end of statement Thanks
View Replies !
Select Statement Help
Hello I only need to get the row from InvoiceHeader where branchID = 116The problem is I'm also getting the rows from InvoiceDetail where branchID is stored how will I solve this? Here's the code. SelectBranch.BranchLocation,Receipt.InvoiceNo,Receipt.AmountPaidFrom ReceiptINNER JOIN InvoiceHeader ON Receipt.InvoiceNo = InvoiceHeader.InvoiceNoINNER JOIN InvoiceDetail ON InvoiceHeader.InvoiceNo = InvoiceDetail.InvoiceNoINNER JOIN Branch ON InvoiceDetail.BranchID = Branch.BranchIDWhereBranch.BranchID = 116
View Replies !
Select Statement
Hi all,Can u plz tell me what is wrong with this select statement "select sku from products where cat='" & catitems.SelectedValue.Replace("'", "''") & "' and subcat is nothing" plz help regards
View Replies !
Help Me With A SELECT Statement, Please
hello i have two tables: ProductComments (CommentID, ProductID, UserName, Comment, Date) and Users (UserName, City, Age) i need to SELECT * FROM ProductComments where ProductID = @ProductID, and select from Users Table info about the users who commented i need some help, because i'm not so good at SQL yet:( thank you
View Replies !
Select Statement
The following Select statement shows "distinct l.userid" for the available c.id. I would like to see all the "c.id" even if "distinct l.userid" are NULL. select c.id, count(distinct l.userid) from Companys c left join labvalues l on c.id = l.companyid where l.labdate>='01/01/2007' and l.labdate <'02/01/2007' and c.id in (1,2,3,4,5,6,7) Output: 1 12 2 13 7 25 Expected Output: 1 12 2 13 3 NULL 4 NULL 5 NULL 6 NULL 7 25 PLEASE HELP......
View Replies !
Need Help With This Select Statement
I have a table called fund and a another table called FundPerformance.. and they both are linked together using FundId.. But suppose if a fund doesnt have any performance information.. It doesnt have a entry in the FundPerformance table but has a entry in the Fund table... I have written select statement that would give me the results.. But suppose if that particular fund is not present in the fundperformance table that fund doesnt show up in the select query.. So how can i get it.. I tried Inner Join, Left Outer Join and Right Outer join but it doesnt show up at all.SELECT pf.FundId, dbo.udf_Quarter(Getdate()) PeriodId, f.FundName, CASE WHEN pf.PlanFundDisplayName IS NULL THEN f.ShortName ELSE pf.PlanFundDisplayName END FundNames, f.InvestmentPolicy, f.FundClassCd, c.ClassName, c.ClassDefinition, p.YearToDate, p.OneYear, p.ThreeYear, p.FiveYear, p.TenYear, p.SinceInception, f.ExpenseRatio, f.PortfolioManager, f.AssetAllocationCashPercent CashAllocPct, f.AssetAllocationEquityPercent EquityAllocPct, f.AssetAllocationConvertiblesPercent ConvertAllocPct, f.AssetAllocationFixedIncomePercent FixedIncAllocPct, f.AssetAllocationOtherPercent OtherAlloc, p.TotalNetAssets, p.AsOfDate FROM PlanFund pf Right Outer JOIN Fund f Right Outer JOIN FundClass c ON f.FundClassCd = c.FundClassCd Right Outer Join FundPerformance p on f.FundId = p.FundId ON f.FundId = pf.FundId --Left Outer JOIN FundPerformance p --ON pf.FundId = p.FundId WHERE pf.PlanId = @PlanId AND p.PeriodId = dbo.udf_Quarter(Getdate()) --PeriodId --@PeriodId ORDER BY pf.FundDisplayOrder any help will be appreciated Regards, Karen
View Replies !
Regarding Select Statement
How to select two different fields from two different tables depending on the ID in a query. For Example: A from table1 and c from table 2 must be selected depending on the ID of table1 and Id of table2. please help me.
View Replies !
Help Me With A SELECT Statement Please
hello i am trying to make a select statement between two tables and i don't know how to start doing that i have two tables: UserComments where i store each comment made by all users and the Pictures table, and in one of his rows "LastComment" i store the userName -varchar(255)- of the user who last commented that picture i need to make a select statement with one input parameter (userName of the logged in user) and two output parameters(int) (@totalComments - would come from the UserComments table, and @lastComments - would come from the Pictures table) @totalComments - i need to COUNT how many comments that user has made from the UserComments @lastComments - count at how many pictures that user is last commenter from the Pictures there is no relation between these two tables, i can make two stored procedures one for each COUNT but i think is stresfull for the database please help me, thanks
View Replies !
Use If Statement In Select Sql
Hi. i have the database with status field (true,false) in access i have the cod in vb.net strSqlQuery="select id,name,status FROM... how i can use the IF in this code,as strSqlQuery="select id,name, if (status=true then status="ok" else "No") FROM table.... thanks
View Replies !
Select Statement
Hi, I dont know whts wrong with this plz help??? strQry = "Select classlevel, classcharge, classCost, classcharge - classcost from cart_shipping_chargeLevel order by [classlevel] assending" plz help regards,.
View Replies !
Select Statement
Hi there, I have a table which has lab values.... id, userid, companyid, testid, testname, value, labdate I want to write a select statement which will give me, fixed 5 tests for some userids. Something like..... select testid=1 testid=2 testid=3 testid=4 testid=5 from labvalues where userid in (11,12,13,14,15,16,17,18,19,20) PLEASE HELP THANKS
View Replies !
Select Statement
Hello, I have the following query: Dim sql As Stringsql = "SELECT Events.EventID, Events.VenueID, Events.EventName, Events.EventTypeID, Events.EventOnSale, Events.VALink, "sql = sql & "Venues.VenueID, Venues.Name, "sql = sql & "EventTypes.EventTypeID, EventTypes.Name as EventTypeName, "sql = sql & "EventDateTimes.UID, EventDateTimes.EventDateTime "sql = sql & "FROM Events "sql = sql & "INNER JOIN Venues ON Events.VenueID = Venues.VenueID "sql = sql & "INNER JOIN EventTypes ON Events.EventTypeID = EventTypes.EventTypeID "sql = sql & "INNER JOIN EventDateTimes ON Events.UID = EventDateTimes.UID " eThe EventDateTimes table can contain multiple records that match with the Events table. Is it possible to adjust this query so that only one record is returned per event? Right now, if there are like 3 records in the EventDateTimes table that match the UID in the Events table, then I will see the same event name outputed 3 times. Hope it makes sense... Thanks!
View Replies !
Help With Select Statement
Hi, i've run into a problem with a nested query. Consider this:SELECT VehicleRef, Type, Manufacturer, Model, Derivative, isLimited, Term, MilesPA, CH FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3'I get the following results1 Car Audi A3 1.6 Special Edition 3dr 0 2 10000 229.991 Car Audi A3 1.6 Special Edition 3dr 0 2 10000 252.991 Car Audi A3 1.6 Special Edition 3dr 0 3 10000 219.991 Car Audi A3 1.6 Special Edition 3dr 0 3 10000 242.991 Car Audi A3 1.6 Special Edition 3dr 0 2 20000 252.991 Car Audi A3 1.6 Special Edition 3dr 0 2 20000 296.991 Car Audi A3 1.6 Special Edition 3dr 0 3 20000 241.991 Car Audi A3 1.6 Special Edition 3dr 0 3 20000 291.991 Car Audi A3 1.6 Special Edition 3dr 0 2 30000 274.991 Car Audi A3 1.6 Special Edition 3dr 0 2 30000 340.991 Car Audi A3 1.6 Special Edition 3dr 0 3 30000 264.991 Car Audi A3 1.6 Special Edition 3dr 0 3 30000 339.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 10000 227.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 10000 249.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 10000 220.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 10000 244.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 20000 253.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 20000 298.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 20000 244.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 20000 292.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 30000 279.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 30000 344.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 30000 267.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 30000 339.99What I need is to only retrieve each vehicleID once, but with the best (lowest) CH price, I also need the term and mileage that corresponds with that price.I tried thisSELECT VehicleRef, Type, Manufacturer, Model, Derivative, isLimited, Term, MilesPA, CH FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3' AND CH = (SELECT MIN(CH) FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3' AND ch >=1 AND ch <=1000)This only returns 1 line though. Is there anyway to get the result I want using one query?Thanks
View Replies !
Select Statement Help
Hi, I am trying to select only the most recent record added to a table per user. Say the table has a userid, date, and a color and may look like this: 2 5/06/07 red 8 5/3/07 grey 2 5/13/07 green 4 4/30/07 orange 8 4/26/07 yellow And I want, in any order: 2 5/13/07 green 8 5/3/07 grey 4 4/30/07 orange Thanks for any help. Greg
View Replies !
|
TRACKER
