Analysis :: SSAS Tabular Model Processing Error

Nov 4, 2015

I get the following error while processing a SSAS tabular model (2014) on a new server.The SSAS service on this server is running under a login which has access to the SQL server data sources. I tried changing the provider to OLEDB from SQLCLNI11 in the connection string but that doesn't work too. The error message isn't useful to debug further.

The cube processing succeeds on a different server. I scripted out the cube DB and ran it on the new server and am trying to process full but it fails with the following error.

Error Message:
The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.

More Details:
OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.

For more information see SQL Server Books Online.; 08001; SSL Provider: No credentials are available in the security package

; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001.
A connection could not be made to the data source with the DataSourceID of 'd7a37dae-be87-44e0-a8b2-498069af82c9', Name of 'connection name'.
An error occurred while processing the partition 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c' in table 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c'.

The current operation was cancelled because another operation in the transaction failed. The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.

View 3 Replies


ADVERTISEMENT

Analysis :: Processing SSAS Tabular Model Automatically

Oct 18, 2012

how can i automatically update my tabular model in the future when there's an update in my database.

View 4 Replies View Related

Analysis :: SSAS DAX - Tabular Model Deployment / Given Key Was Not Present In Dictionary

Jun 2, 2015

We are working on implementing DAX formula(s) on our tabular model (SSAS 2012). When we tried to deploy the solution, deployment wizard giving us then below error:The given key was not present in the dictionary...I checked all the formula(s) that we recently implemented and all looks fine.

View 4 Replies View Related

Analysis :: SSAS Tabular Model In DirectQuery Mode Clients

Jun 27, 2015

I'm working on a Tabular model at my job since the users have a requirement to query against a live data source. I've been looking online for clients that issue DAX as opposed to MDX to the model, but besides SSRS and Power View, I could not find anything else. Any other client side interfaces to a DirectQuery Tabular model?

View 2 Replies View Related

Analysis :: SSAS - Time Intelligence Is Not Working In Tabular Model

Apr 17, 2015

I have a separate date dimension marked as Date table in Tabular Model and having proper relationship with another table(e.g SalesTable) with column of date type. But still time intelligence functions are not working. I am using the date column from other table (e.g SalesTable) in the formula. What exactly going wrong in our tabular model.

View 3 Replies View Related

SQL 2012 :: SSAS Tabular Model - ADD Column Option Grayed Out

Mar 29, 2015

I am trying to learn building SSAS tabular model. While following a tutorial I need to add a column to an existing table but for some reason the ADD Column option (insert column in other menu is also not appearing) is greyed out.

View 4 Replies View Related

Analysis :: Adding KPI To SSAS Tabular Perspective

Aug 1, 2012

SQL Server Data Tools within VS 2010 Shell.2012 SASS in Tabular Mode.I've created a Measure and KPI in my fact table.  I've created a perspective named "Summary"  When selecting the fields and measures for display in the perspective, the measure is available, but not the KPI (target, status, etc.). When Analyzing in Excel with the Summary perspective, the KPI is not available in the field list. When analyzing in Excel with the (default) perspective, the KPI is available.As far as I can tell, there is no way to select a KPI within the perspective window. 

View 8 Replies View Related

Analysis :: SSAS 2014 - How To Change Mode To Tabular

Nov 13, 2015

I have a new 2014 SSAS installation.  During VS2013 Tabular Project create I get an error Cannot connect, Reason The workspace database on server ***** is not running in tabular mode.I've changed    msmdsrv.ini  - DeploymentMode>2...The server wont start.

View 3 Replies View Related

Analysis :: SSAS Tabular Stand Alone Table In Excel

Jul 16, 2015

I am working with SSAS Tabular. I have a stand alone table with 60 columns and contains 120K records. Table size is 250MB. And trying to build a tabular report out of it and it is taking longer and throwing exception, screenshot attached.

It might be cross-join issues, as workaround created a dummy measure and using in report. But it working for 10-20 k records and beyond throwing same exception. I have 8 GB RAM and 100 GB free disk space.

Customer wanted it in SSAS Tabular...

View 3 Replies View Related

Analysis :: SSAS Tabular And SSRS - Implementing Security

Oct 1, 2015

i would like to pose a question, when a user do a login in SSRS server,is  it possible to pass the username to SSAS tabular, to implement security? I've tested using USERNAME() creating a role that relates USERNAME() with a dim user username, but now i need to implement it with the username used in SSRS server. 

View 2 Replies View Related

Analysis :: SSAS Tabular - Preview Of Calculation Not Working

Oct 30, 2015

Does any1 know why preview of a DAX calculation does not work? I mean once you enter the calculation in the bottom of the table it doesnt´t show up.

View 8 Replies View Related

Analysis :: SSAS Tabular - Grouping In Excel Grayed Out?

Nov 10, 2015

I have a Tabular data model and I'm returning a measure that counts employees (each row is an employee) and then a calculated column in the model that gets SeniorityInMonths.

So if an employee was hired exactly 1 year ago, they would have 12 in this column.

I want to group these into bins, but the Group option is grayed out.

View 6 Replies View Related

Analysis :: Tabular Model - Optimization

Jul 2, 2013

I have a Tabular model, it has 8 tables , 7 of the tables process in 3 mins, but the main table is 22.3gb in size//I am processing the table on a 64 bit pc with 8 gb ram to the local instance from a Production server//At this rate it will take days to process the Main table 22.3gb, the main table was running off a view but I have inserted the data into TableA and updated the model///Only other optimization process I can think of is copying TableA to my local machine but the performance to the Server on the network is not an issue.I am just process the main table for the last 4 hrs and it is only at 11.7 mill records out of 124 mill total @ this rate it will take 44 hours

Size: 22342752 KB
CREATE
TABLE [dbo].[StagingTablevwKeyEventsfact](
[PKID] [bigint]
NULL,     
[ManufactureGeoLocationCode]
[nvarchar](14)
NULL,
     
[code]....

View 6 Replies View Related

Analysis :: Processing / Deploying Adventure Works Tabular Cube

Sep 14, 2015

I am trying to create a Adventure Works Tabular cube in my developing machine and im having problems deploying the tabular cube (the DW database was firstly attached without problems)

So I'm having problems processing Adventure Works Tabular Cube, the problems are somewhere between SSAS project configuration and running privileges, i think. I'll describe exactly where i am:

- in SSMS 2012, connections, tables and roles and roles are empty, i only have the full name of the database when I try to process i get an error "the table with id of "product category 92583829......", Name of Product Category refereced by the model Cube, does not exist. An error ocurred when loading the model cube, '?c:program filesmicrosoft
sql serverMSAS11.MSSQLSERVEROLAPDataAdventureWorks Tabular model SQL 2012.0.dbModel.21.cub.xml'. (Microsoft AnalysisServices.)"

- in SQL Server configuration Manager, I have
Sql Server (MSSQLSERVER) running with account NT ServiceMSSQLSERVER
Sql Server Analysis Services (MSSQLSERVER) running with account .L.ABCDE , which is my account, i've changed because i've read somewhere that i could have problems with privileges.

(Note: it's strange because SSAS is tabular, i can see a blue rectangle (sort of) in SSMS but in configurator manager seems to be a cube.)

- in SSAS Project i unzip a clean copy of the project and the first error is that BIM file can't be found, it try's to find server TOSHIBA_S50_BTAB, but as i have only tabular SSAS running, i replace for TOSHIBA_S50... And some time ago it worked, now it doesn't even found TOSHIBA_S50_B?!!!!

View 3 Replies View Related

Analysis :: SSAS Tabular Missing Data Column Doesn't Deploy

Aug 2, 2015

I have created a tabular model with VS 2013 Ultimate. I deployed the model several times and everything works great with Power Pivot.

One of the dimension tables, "Age", has an integer field that is null. I updated that column in SSMS to have values, processed the table in VS and the "Age" column now has integer values.

I deployed the model again, connected with Power Pivot, and the "Age" column still has not data. I refreshed the Excel spreadsheet several times, started a new one, deployed several times and there is still not data in the "Age" column even though it clearly exists in VS.

I opened SSMS on the Analysis Service and queried the table in question and it also shows no data in the Age column even though it is in the data table and the VS model.

I can't find anything different about this column than others that contain data. How can this be happening?

View 2 Replies View Related

Analysis :: SSAS Tabular And Multi-dimensional Instances Using Same Server Instance?

Aug 27, 2015

Is it possible to install 2 SSAS instance (one default and one named) and have them access a single sql server instance (default) all on the same server?

View 3 Replies View Related

Analysis :: SSAS Tabular - Dynamic Security Roles - Mixing Together DAX Filters

Oct 10, 2015

I have two different roles, each one with a dax filter. One is for filtering users that access by Excel, and other for filtering users that access by Reporting Services, respectively:

=CONTAINS(FILTER(V_FILTRO_C;V_FILTRO_C[IDPerfilGrupo]<>7);V_FILTRO_C[iCursoCod];[SK_CURSO];V_D05_DIM_UTIL[DSC_LOGIN_USER];RIGHT(USERNAME();LEN(USERNAME())-SEARCH("";USERNAME())))
=CONTAINS(FILTER(V_FILTRO_C;V_FILTRO_C[IDPerfilGrupo]<>7);V_FILTRO_C[iCursoCod];[SK_CURSO];V_FILTRO_C[IDUtilizador];VALUE(CUSTOMDATA()))

To create only one role that serves Excel and Reporting Services users, is it viable to use only the || (OR) operator?, is there any other regard i should take?

View 2 Replies View Related

Analysis :: Convert Tabular Model To Multidimensional

Sep 25, 2015

We have a requirement to convert Tabular model to Multidimensional as few functionalists like actions does not support in tabular. Looking for list of things needs to take care to convert tabular solution to Multidimensional.

View 2 Replies View Related

Analysis :: Creating Tabular Model On OLTP

Nov 4, 2015

I have been looking at implementing a tabular model based on an OLTP database that's not dimensional. I know that this is possible but during my proof of concept I have encountered numerous problems ...

The things that I have run into are: After setting up the relationships I have found that measures filter context don't propagate along the relationships as I would expect. if the measure is coming from a target table and not a source then an ALL member is returned ( as in multi dimensional when a dimension isn't related to a measure group). Given the lay out of an OLTP database this will be hard to avoid.

One thing I have done to try an mitigate the above problem is to combine the tables used for measures in a view and using that in the source to connect to the rest of the tables. however due to the tables being of different grains this has then created duplication in some of the keys and measures. so the keys cant be used in relationships and the measures aren't accurate.

Are these things other people have come across? or should I give up the ghost and just recommend using dimensional models for the source? is tabular just geared towards a DW the same as multidimensional?

View 2 Replies View Related

Analysis :: Show Grand Total When Using SSAS Tabular Role Security Permission

Oct 30, 2015

If user want to see the grand total for a measure with include all members, even though the user has limited access for that member, so how we can do using DAX?For example, let’s say the total revenue for all the divisions in a cube is $15,000. You create a role called “Division A”, and set it up so members of that role can only see the revenue for Division A, which totals $3,000. If you use a front-end tool like Excel to access the cube and use the division hierarchy to see the total revenue, you will see the revenue of $3000 for Division A, but also want to see the Grand Total for the revenue as $15,000How we can achieve above scenerio in tabular model (DAX).

View 3 Replies View Related

Analysis :: Can Applications Connect To SSAS Tabular Mode Cubes Through ODBC Drivers?

Aug 26, 2015

Can applications connect to SSAS Tabular mode cubes through ODBC drivers? I have been asked the question specifically regarding SAS, and I can see (for example) SAS Enterprise Guide has the ability to connect to sources via ODBC, so I now need to find out if there are such things as ODBC divers for SSAS (specifically Tabular).

View 3 Replies View Related

Analysis :: Deploying Tabular Model Drops Records

Oct 22, 2015

I'm using SQL Server 2012 Bi edition.

I created a model in Visual Studio 2012 and when I process the model, most tables (the ones that should) process 77,546 records and that is reflected in VS.

However, when I deploy the model to the server it is only deploying 76,500 records for those tables.

Where those 1,046 records went to? Is there a setting that limits the records to be deployed? My base tables in the Data Mart have 77,546 records, just as in my Visual Studio model.

View 3 Replies View Related

Analysis :: Ignore Unrelated Dimensions In Tabular Model

Jul 11, 2013

how to set 'Ignore Unrelated Dimensions' property in Tabular Model.

View 3 Replies View Related

Analysis :: Fact Tables Appearing As Dimensions In Tabular Model

Jul 6, 2015

I built my first tabular model and see that my fact tables are also appearing as dimensions. In Multi dimensional mode i could choose which are the dimensions. How do i do that in tabular model.

View 2 Replies View Related

Analysis :: SSAS Tabular Small Database Fails In Excel Pivot Table Because Of Memory Shortage?

May 7, 2015

I have a very small SSAS database with around 35 Mb. I opened it on Excel 32 bits and started dragging fields to a pivot table and it started failing with memory errors. The behavior on the SSAS server was that memory started growing very fast until 8 GB (vm memory total) and then the error is reported in excel.

What might be the issue in such a small database? I would understand in a big database, but not on this one.

View 13 Replies View Related

Analysis :: SSAS Partition Processing

Oct 21, 2015

I am facing issue with partition processing. I am having a SSAS cube which is having 5 partitions. These partitions are processed through a sql server job using SSIS packages. In packages I used SSAS process task to do this.Now problem is, job is running successfully and showing that the step which is having partition process also fine.But data is not updating in the partition. While checking the partition properties, it is not updated with recent date and time.

When I try to manually process the partition, it is getting succeeded and recent data is getting reflected with recent date and time.Package configuration is done in job itself.

View 4 Replies View Related

Analysis :: SSAS 2012 - Notification While Cube Is Processing

Apr 16, 2015

I am working on SQL 2012.We have a SSAS Cube build. On top of it client use Excel to connect to SSAS Cube and See the reports.My Cube process every hour and take almost a 1-2 min to Process.When ever End user/Client See or refresh the Excel report (Which use Cube as Source),WHEN CUBE IS PROCESSING ,they get an error that Source is not available

We Have tried best but cannot bring down the Processing time of the cube to 3-5 Second , so that End user don't face report refresh issue at the moment of cube processing 

Requirement :In Case End User see the report while Cube is processing from back end , Instead of Error they should see some customize Msg which we can provide some thing Like "Data is Refreshing , please wait ".

View 5 Replies View Related

Analysis :: SSAS - Dimension Processing Failing Due To BitLocker Encryption

May 8, 2015

I'm facing an issue while processing OLAP. I have enabled BitLocker for dirve encryption and OLAP services uses this drive for db storage. OLAP is executing though SSIS package and I'm getting below error in Package. When debugging the script, it says Drive is encrypted using BitLocker. 

My client requires TDE for all databases, for OLAP we decided to use BitLocker: [URL] ....

SQL server is installed on C Drive & D Drive is the storage location for OLAP DB. When locking D Drive, OLAP processing failed. When I tried to restart SQL Server Analysis service in Services.msc it is not starting. Service restarted only when D Drive is unlocked. Is there any way we can process OLAP even when the drive is locked?

Error message is given below:

"The following system error occurred:  This drive is locked by BitLocker Drive Encryption. You must unlock this drive from Control Panel. "

View 3 Replies View Related

Analysis :: SSAS Model Where Never Need Cube To Be Offline

May 21, 2015

I am thinking of a possible design where the cube will never go offline.

Usually when I do some code changes on my cube the cube goes offline and I need to Full Process it again to get it back .

However , in cases where the cube is extremely critical for the business users , it would be great if I can deliver a solution where the cube never goes down.

View 4 Replies View Related

Analysis :: Looping AMO Objects Versus Using SSAS Built-in Parallel Processing?

Jul 22, 2015

I am creating an SSIS Script Task that will be used to process SSAS dimensions and partitions and ideally log the details of each in a table. Any info on the benefits or drawbacks of using the built-in SSAS parallel processing as opposed to doing it manually in a multi-threaded "Parallel.Foreach" loop using the .NET AMO library.

In my testing, when I use a Parallel.foreach loop, I am able to obtain and log information about the object such as end time and time to process immediately after each object is processed.  This allows me to keep a history of processing time for each object:

public void processDimensions(Server Server, Database Database, ProcessType processType)
{
Parallel.ForEach(Database.Dimensions.OfType<Microsoft.AnalysisServices.Dimension>(), d =>
{
DateTime beginTime = DateTime.Now;
try
{
d.Process(processType);

[code]....

If circumventing the built-in SSAS parallel processing is not best practice I'd like to know in advance before I go too far down that path.

View 2 Replies View Related

Analysis :: SSAS (BISM) 2014 Full Processing Number Of Threads Are Limited

Jul 6, 2015

I have been tasked with processing a large tabular cube using SQL AS 2014 (with latest CUs).The three Fact tables having 1.2 billion rows (in each table)  have been divided into 30 vertical partitions to aid in parallel processing.  So around 40 million rows per partition.

Using SQL Profiler to monitor the Row counts (IntegerData) of records processed seems to max out around 2 million rows per minute, then tapers down to about 200k /minute.

The processing is taking over 14 hours and I need to get it lower if possible. The server has 48 cores (2.66MHz) and over 1TB RAM installed. But I really don't ever see CPU exceed 20% having a maximum of 206 threads running on the instance msmdvr.exe

Available RAM is always at least 30% (or 300GB).

I have increased the Vertipaq MIN/MAX 60%/80%

I have increased the OLAP / Processing / Max Thread Pool Min 500 and Max to 1000.

The connection properties have been increased to allow 100 connections, the majority of the processing consumes about 92 connections for the 90 large partition views for the facts.

What can be done to increased the server resource utilization and decrease processing times?

I have increased both

View 5 Replies View Related

Power Pivot :: Update Error (works If Importing Into SSAS Tabular)

Jun 25, 2015

The thing is I can´t make update powerpivot, it raises a generic error. Tried to import into ssas tabular and worked fine.

Is there any way to get a better error detail or debug it someway?

View 4 Replies View Related

Error While Processing Cube In SSAS 2008

Nov 4, 2009

i am getting the following error when i am processing the cube in SSAS 2008...Errors in the back-end database access module. The size specified for a binding was too small, resulting in one or more column values being truncated. Errors in the OLAP storage engine: An error occurred while the 'Policy Type' attribute of the 'Policy Type' dimension from the MyDemo' database.i verified the datatype column length for policytype column in the dimension as well as all fact views.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved