Cannot Connect To SQL Server With SQL Server Management Studio Express
I recently installed SQL Server Management Studio Express, and used it to connect remotely to SQL Server 2005 Express. The first connect worked fine. It was suggested to me to update ODBC drivers to connect to the server using Microsoft Access. In doing so, I found what I thought were Studio Express updates and tried to install them. From then on, I could no longer access the server. The error was a nebulous one that indicated that is could not find the server.
I verified that the the server was set up correctly by installing Studio Express on another machine, and it connected fine.
I uninstalled and reinstalled. When I ran it, I did not get the "first time use" routine, and still could not connect. I reinstalled MDAC with my Windows XP sp2 disk and reinstalling Studio Express, and still could not connect.
I started a thread - http://forums.microsoft.com/msdn/ShowPost.aspx?postid=2557611&siteid=1 - on SQL Server Express foram, and they verified that the server was set up correctly. They suggested that the client network protocol stack on your computer is broken. They suggested I post here to seek help in fixing it.
Any help would be much appreciated.
Steve Colino
View Complete Forum Thread with Replies
Related Forum Messages:
Can't Connect To SQL 2005 Express With SQL Server Management Studio Express
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View Replies !
Cannot Connect To SQL Server 2005 Express With Management Studio Express
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error: Cannot connect ot MPLIAMSQLEXPRESS Additional Information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server) I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message. Please help.
View Replies !
Cannot Connect To SQL Server Express Edition Using Its Management Studio
Please, I use tyhe Visual Studion 2005 SQL Server Express Edition Management Studio (SMSE) to create the backend database and trying to set the connectionstring from the web config file, but what I continue to get as an error is that "<computername>/ASPNET" login failed for that user, cannot login to the Management Studio. This is my expression from the web config file <connectionStrings><clear /><add name="LocalSqlServer" connectionString="Data Source=.SQLEXPRESS; Database=<dbname>;User Instance=true; Integrated Security=true" providerName="System.Data.SqlClient" /> </connectionStrings> Is there anything I do wrong? Please, I need to solve this and it's urgent.Thanks Kayode Banjo Programmer
View Replies !
Cannot Connect To Report Server From Management Studio Express
hello there, I appreciate any help on the following issue: When I want to connect to a local report server on as shown in the "Reporting Services Tools" tutorial (http://msdn2.microsoft.com/en-au/library/aa337424.aspx), the SSMSE does not show the option "Reporting Services" in the "Server type" drop down list in the "Connect to server" dialog. The tutorial says "In the Server type list, select Reporting Services. If Reporting Services is not on the list, it is not installed." This must be wrong as the SSCM clearly shows an installed and running "SQL Server Reporting Service (...)". Also if i call the webinterface (http://localhost/reports/) a page loads that says "SQL Server Reporting Services Home" with some options. And here something is not correct too. The "contents" tab of the report manager says "There are no items in Home." I started to work on some basic tutorials using the sql server business development studio, and everything works fine. I can create reports, which derive data from the AdventureWorks db properly. Can anyone tell me the adequate steps to fix the SSMSE connection problem and the webinterface view problem? Here are some additional informations: I use WinXP SP2, which makes the IIS version 5.1 SQL server is 2005 express with advanced features and i installed the management toolkit, and the AdventureWorks db. Installation history is as follows: .NET framework 2.0 + VS2005 professional edition was installed 1. installed ss2005express+advanced features, on a named instance. worked fine. I did not install the SSMSE at this point, as i knew it is included in the toolkit too. 2. configured the reporting services through the "reporting services configuration" tool. worked fine. 3. installed the management tool kit. worked fine. 4. installed the AdventureWorks db. installed, but was not attached automaticaly to the database engine. 5. attached the AdventureWorks db to the database engine manually. worked fine, can be viewed and accessed properly. So there I am. I have no clue what went wrong. A last hint that makes me think is this: In the SSCM the sql server an the sql server reporting services have different instance ids (MSSQL.1 and MSSQL.2 respectively). Thanks in advance for your solutions and hints, that is - for your time :-) art
View Replies !
Cannot Connect Remotely To SQLExpress Via SQL Server Management Studio Express
Hi all, I'm having a little trouble connecting to a SQLExpress instance on a remote domain using SQL Server Management Studio Express.I've read that by default the program is set up locally only, so have edited the Surface Area Configuration. It only gives me the option to edit 'Services and Connections' on the localhost, but have edited the Remote Connections to use TCP/IP and Named Pipes. In the Management Studio, I enter the server name, and login credentials. On the Connection Properties tab I changed the network protocol to TCP/IP though everytime I attempt to connect I get the following error message: Any help would be greatly appreciated. Rich
View Replies !
SQL SERVER 2005 Issue, Cannot Connect Using Management Studio Express
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others Named Pipes Provider, error: 40 - Could not open a connection to SQL Server have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented. when i use osql in command prompt to make a test connection it tells me this [SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. on this forum it says to perform a ping and and an a ping a- to my server which does work. Have been working on this for 3 days and can't figure it out. Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer. I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT! If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-) If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can. Thanks in advance
View Replies !
Server Express, Management Studio Express, Visual Studio Standard, And An ASP.NET Page....
I believe I'm missing something as far as my configuration goes...I'm new to working with SQL server and the databinding I'm trying to do. I have an ASP.NET page that has a radio button list box which I have databound to a database served up by SQL Express I'm having a lot of problems with connections... I was going to enumerate the behavior under each configuration (local only, remote tcp/ip only, remote pipes only, remote both), but I've realized that it is just flaky. Sometimes I can connect to the db with SQL Studio express, sometimes not. Sometimes I can add new tables and edit tables, sometimes not. Sometimes I can create a new connection when trying to databind from within Visual Studio, and sometimes not (sometimes I can't even connect, other times, I can connect initially but when I build a query through the designer it then has problems). Lastly, sometimes the ASP.NET page works correctly and sometimes not. This all seems to be mostly independent of how I configure SQL Server as far as what kinds of connections are allowed. I thought there was a pattern, but as I tested it more rigorously I found there wasn't. What I would like to do is be connected to the same DB with Visual Studio and SQL Studio, edit the DB as I wish, databind to it, and test my ASP.NET page, all without needing to jump through a bunch of hoops (although right now I wouldn't even know what those hoops are...it's just a shot in the dark as to what will work). It's all quite maddening and any help would be appreciated.
View Replies !
SQL Server Management Studio Cannot Connect To Local Instance Of SQL Server 2005 SP2
Hello, I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good. I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in. First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error: "An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)" However, I went in to see what other services I could connect to, and here's the results: Analysis Services : OK! Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)" SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider) Integration Services : OK! I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either. I even turned off my windows firewall and still no luck connecting to my own. So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong. Any ideas? Thanks!
View Replies !
Can't Connect To Local Server Instance MSSQLSERVER In SQL Server Management Studio (SQL2005 Sp2/Vista)
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista). SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself. I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works. The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
View Replies !
Can Not Connect To Report Server From SQL SERVER 2005 Management Studio
Hi All, I have a brand new install of sql server 2005 on brand new WINDOWS SERVER2003 with latest versions. Every thing works fine excepting I get a 404 when I connect to report server from management studio.. I am even able to publish reports and all the url://localhost/reportserver url://localhost/reports url://localhost/reportserver/reportbuilder/reportbuilder.application all work fine on local machine and with in the network behind the fire wall. But when I try to connect to report server using management studio on the local server or remote server, I get the following error. " TITLE: Microsoft SQL Server Management Studio ------------------------------ The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ ADDITIONAL INFORMATION: The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) " More techinal details "=================================== Cannot connect to xxxxxxxxxxxx. =================================== The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.MissingEndpointException.ThrowIfEndpointMissing(WebException e) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() =================================== The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() " Any help would be greatly appreciated. Bob
View Replies !
Can Not Connect To Report Server From SQL SERVER 2005 Management Studio
Does anybody knows how to resolve this? TITLE: Connect to Server ------------------------------ Cannot connect to ServerName. ------------------------------ ADDITIONAL INFORMATION: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ It was my reporting services can not be accessed using web based. There was an error message "Service Unaivailable" Then i found out that the Reporting Services under the Application Pool (IIS 6.0) was not running. Then i recreate application domains, run the Reporting Services, restart the server. and when i try to connect using Management Studio, the error message i got was the above message. When i try to connect using web, the error i got is : HTTP Error 404 - File or directory not found. Internet Information Services (IIS) Help!!!
View Replies !
Can't Connect To SQL Server Management Studio Through VPN
Hi, I am currently looged into the OS (windows xp pro,belongs to domian ABC) as user vdm. I have connected to VPN for a client and would now like to connect to their sql server database using sql server management studio. This sql server installation is on a remote domain called XYZ. When I open sql server studio and select windows authentication, my local domain ABC is selected and greyed out...I would like to change this to XYZ domain...how to achieve this ? thanks in advance
View Replies !
Cannot Connect Via C# But Can Via Server Management Studio
When I try to connect to my sql server 2005, from a asp.net web application (asp.net development server) using... Database=Prism_Project_db; Server=(local); Integrated Security=SSPI; MultipleActiveResultSets=True ... as the connection string, i get: Cannot open database "Prism_Project_db" requested by the login. The login failed. Login failed for user 'R-LAPTOPRyan Holdren'.Yet I can connect using sql server management studio, no problem: Server Type: Database Engine Server: R-Laptop Authentication: Windows Authentication which connects as "R-LAPTOPRyan Holdren". I do not understand how the login could work for one application and not for another. Can anyone help me get this working? Ryan
View Replies !
Visual Studio Database File And SQL Server Management Studio Express Question
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View Replies !
SQL Server 2005 Express Edition With SQL Server Management Studio Express (SSMSE)
Hi all, I have installed SQL server 2005 express edition with SQL server Management studio express (SSMSE). I have installed also SQLce and I would know how I can manage sql compact edition databases (.ldf) with sql SSMSE, if it is possible! I would be grateful if you could explain it trought a detailed guide (I am a beginner user of sql server tools) or trought a link to useful sites. I'm Looking forward for your reply and still trying... Alessandro
View Replies !
Microsoft SQL Server 2005 Management Studio - Opening SQL-File From Explorer Does Not Connect Automaticly To Server/database
hello, I have a question about opening files in the Microsoft SQL Server 2005 Management Studio. In the old Query Analyzer from SQL 2000 I can open SQL Files via drag & drop (from explorer to QA) or open it with a double click in the explorer. Then the Files opened, if I had actual a connection to a server / database (QA is stared with one file and has a connection to Server/Datebase), with this connection. Now in Microsoft SQL Server 2005 Management Studio I'll be asked everytime for Server and have to get the database from the database list - it does not connect automaticly to server/database, that is actual connected (I have opened a file with the connection and a connected database in the object explorer). Someone do not have this problem - but we found no option to set it up. Any ideas? thanks & best regards, Christian Kiedels
View Replies !
SQL Server Management Express Studio Management Tools
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
View Replies !
SQL Server Management Studio Can Not Connect To SQL Server Mobile
My System: SQL Server 2005 Express, Microsoft SQL Server 2005 Compact Edition, Vista 64 --- Hello@all, my Problem is i can not connect on Server Management Studio with my SQL Server Compact (local). here is the message in German: TITLE: Verbindung mit Server herstellen ------------------------------ Es kann keine Verbindung mit '(local)' hergestellt werden. ------------------------------ ADDITIONAL INFORMATION: Fehler beim Herstellen einer Verbindung mit dem Server. Beim Herstellen einer Verbindung mit SQL Server 2005 kann dieser Fehler dadurch verursacht werden, dass unter den SQL Server-Standardeinstellungen Remoteverbindungen nicht zulässig sind. (provider: Named Pipes-Provider, error: 40 - Verbindung mit SQL Server konnte nicht geöffnet werden) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=...=2&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ in the SQL Server Configutation Manage is all Protokoll Aktive, i habe testet with normal user Account and Admin Account... all not work... Installet Software: Microsoft SQL Server 2005 Microsoft SQL Server 2005 Compact Edition [DEU] Microsoft SQL Server 2005 Compact Edition [DEU] Server Tools Microsoft SQL Server 2005 Compact Edition Developer Software Microsoft SQL Server Management Studio Express Microsoft SQL Server Native Client Microsoft SQL Server VSS Writer Services running to SQL SQL Server (SQLEXPRESS) SQL Server VSS Writer SQL Server-Browser what is the problem here? please help me....
View Replies !
Cannot Connect To Sql Server Management Studio - SSL Issue?
We are working with a need to implement SSL and I used the IIS resource kits selfssl.exe tool to create a certification to test somethings on localhost. This worked well and I logged off, went home, logged back on from home via vnc and worked some more. No problems. I then logged off and called it a night. I did not uninstall the personall ssl certificate. At midnight, my machine reboots and defrags. Just including all the 'variables' I can think of. This morning I came into work and noticed that I could not successfully connect to the website. Then I noticed that I was not connecting to Sql Server. I got the error: A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) Okay. So I went to the event viewer and there was a new event, beginning after my reboot at midnight: A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x80090016. So I ran the certmgr.msc tool and removed the certificate from my personal folder. I still could not connect. Not after a reboot, not after stopping and restarting SQL Server, and not after removing the cert via IIS and stopping and restarting IIS.So I decided I would go to Management Studio and test the connection there. I could not connect via Management Studio! If anyone has an experience to lend here, I would be appreciative. Thank you.
View Replies !
Cannot Connect To Database In Server Management Studio
THIS IS DRIVING MY CRAZY!!!! I currently can't connecto to my database in SQL Server 2005 (enterprise) but as soon as I try to use any functions, I get cryptic errors found below. I am about to pull my hair out. Everything was working fine for around 4 days and now everything just blows up. I've tried using both sql authentification and also windows: Errors I'm getting (print screens): http://www.photopizzaz.biz/junk/sqlserver_2005_errors_and_resolutions.doc SQL logs: http://www.photopizzaz.biz/junk/logs.txt Event log errors are: Event Type: Error Event Source: MSSQLSERVER Event Category: (4) Event ID: 17809 Date: 12/21/2005 Time: 11:18:34 PM User: N/A Computer: BG-SQL2005 Description: Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 91 45 00 00 14 00 00 00 ‘E...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 00 00 00 00 ...... Event Type: Failure Audit Event Source: MSSQLSERVER Event Category: (4) Event ID: 18456 Date: 12/21/2005 Time: 10:34:03 PM User: N/A Computer: BG-SQL2005 Description: Login failed for user 'sa'. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 18 48 00 00 0e 00 00 00 .H...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 8561 Date: 12/21/2005 Time: 10:19:51 PM User: N/A Computer: BG-SQL2005 Description: Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 71 21 00 00 0a 00 00 00 q!...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Error Event Source: Report Server Windows Service (MSSQLSERVER) Event Category: Management Event ID: 107 Date: 12/21/2005 Time: 4:46:14 PM User: N/A Computer: BG-SQL2005 Description: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View Replies !
Help! Getting Errors When Trying To Connect To SQL Server Management Studio
Hi All, I have Windows 2003 Server with MSSQL 2005 Standard. I am able to connect via Windows Authentication, but when I try to change it to SQL Server Authentication with user 'sa' I'm then being prompted with the error msg: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider) Here is the entire list of msgs that are showing up: =================================== Cannot connect to SOLELL-QGL5PG9D. =================================== A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476 ------------------------------ Server Name: SOLELL-QGL5PG9D Error Number: 233 Severity: 20 State: 0 ------------------------------ Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Any pointers? -Alon.
View Replies !
Cannot Connect To Database In Server Management Studio
I currently can't connecto to my database in SQL Server 2005 (enterprise) but as soon as I try to use any functions, I get cryptic errors found below. I am about to pull my hair out. Everything was working fine for around 4 days and now everything just blows up. I've tried using both sql authentification and also windows: Errors I'm getting (print screens): http://www.photopizzaz.biz/junk/sqlserver_2005_errors_and_resolutions.doc SQL logs: http://www.photopizzaz.biz/junk/logs.txt Event log errors are: Event Type: Error Event Source: MSSQLSERVER Event Category: (4) Event ID: 17809 Date: 12/21/2005 Time: 11:18:34 PM User: N/A Computer: BG-SQL2005 Description: Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 91 45 00 00 14 00 00 00 ?E...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 00 00 00 00 ...... Event Type: Failure Audit Event Source: MSSQLSERVER Event Category: (4) Event ID: 18456 Date: 12/21/2005 Time: 10:34:03 PM User: N/A Computer: BG-SQL2005 Description: Login failed for user 'sa'. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 18 48 00 00 0e 00 00 00 .H...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 8561 Date: 12/21/2005 Time: 10:19:51 PM User: N/A Computer: BG-SQL2005 Description: Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 71 21 00 00 0a 00 00 00 q!...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Error Event Source: Report Server Windows Service (MSSQLSERVER) Event Category: Management Event ID: 107 Date: 12/21/2005 Time: 4:46:14 PM User: N/A Computer: BG-SQL2005 Description: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View Replies !
Cannot Connect To Database In Server Management Studio
I currently can't connecto to my database in SQL Server 2005 (enterprise) from the SQL Server Management Studio itself! as soon as I try to use any functions, I get cryptic errors found below. I am about to pull my hair out. Everything was working fine for around 4 days and now everything just blows up. I've tried using both sql authentification and also windows: Errors I'm getting (print screens): http://www.photopizzaz.biz/junk/sqlserver_2005_errors_and_resolutions.doc SQL logs: http://www.photopizzaz.biz/junk/logs.txt Event log errors are: Event Type: Error Event Source: MSSQLSERVER Event Category: (4) Event ID: 17809 Date: 12/21/2005 Time: 11:18:34 PM User: N/A Computer: BG-SQL2005 Description: Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 91 45 00 00 14 00 00 00 ?E...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 00 00 00 00 ...... Event Type: Failure Audit Event Source: MSSQLSERVER Event Category: (4) Event ID: 18456 Date: 12/21/2005 Time: 10:34:03 PM User: N/A Computer: BG-SQL2005 Description: Login failed for user 'sa'. [CLIENT: <local machine>] For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 18 48 00 00 0e 00 00 00 .H...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 8561 Date: 12/21/2005 Time: 10:19:51 PM User: N/A Computer: BG-SQL2005 Description: Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 71 21 00 00 0a 00 00 00 q!...... 0008: 0b 00 00 00 42 00 47 00 ....B.G. 0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L. 0018: 32 00 30 00 30 00 35 00 2.0.0.5. 0020: 00 00 07 00 00 00 6d 00 ......m. 0028: 61 00 73 00 74 00 65 00 a.s.t.e. 0030: 72 00 00 00 r... Event Type: Error Event Source: Report Server Windows Service (MSSQLSERVER) Event Category: Management Event ID: 107 Date: 12/21/2005 Time: 4:46:14 PM User: N/A Computer: BG-SQL2005 Description: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View Replies !
SQL Server Management Studio 2005 Can't Connect
New server - Windows 2003 with latest patches (always up to date) Symantec Antivirus Coporate Edition 10.1 SQL 2005 Workgroup Edition If I run SQL Server Management Studio, it connects fine to the server. Then attach a datafile for my application which is installed on the server. I can run app and open database. All works fine. Then if I try to run SQL Server Management Studio again it can't connect: TITLE: Connect to Server ------------------------------ Cannot connect to HACSRV03. ------------------------------ ADDITIONAL INFORMATION: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) (Microsoft SQL Server, Error: 87) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=87&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ This server is not a production server, as only just installing - like it works fine and then just fails without warning. Help!!!
View Replies !
Cannot Log Into SQL Server Database In Visual C# Express After Using SQL Server Management Studio Express
Is anyone else having the same annoying problem as me? ... I have a SQL Server Express edition database using Windows login authentication. Normally I can access it fine in C# Express, but If I have used SQL Server management Studio express in the same windows login session, i get: Cannot open user default database. Login failed. Login failed for user 'mydomainmyuserid' If I restart my PC, I can then access the database in Visual C# express. I'm running Windows XP. Thanks!
View Replies !
Cannot Connect To Sql Express Via ASP.NET After I Attached And Detached My Db To Sql Management Studio
Hello everybody, I have an ASP.NET 2.0 website running on a windows server 2003 - sql express management studio installed. Today I had to make some changes in my database, add some columns, and so on... So I put the app_offline.htm into the root of the web application, so the IIS unloaded the application domain, attached it in the sql management studio, made the changes I had to do and detached the db. Ok - then I removed the app_offline.html from the root of the application and looked at my internet explorer telling me that the user NT_network... cannot login... What did I do wrong? I attached it, detached it, and at once something went wrong... I tried everything, at least I copied the whole application to another directory and.... It worked fine again! So, can anybody help me, I don`t know what I did wrong or rather how to make changes in my sql express for the future, not having trouble with any security issues... regards Simon
View Replies !
Can't Connect To SQL Reporting Services Through IIS And SQL Server Management Studio
Hi, I'm getting the following error message when I want to connect to reporting services through SQL Server Management Studio. I have also check the reporting services configurations manager for any issues but still can't connect. The http://localhost/reportserver also is down. I also checked if ASPNET account belongs to the Reporting Services security settings and it does. IIS is up and running. I'm running SQL 2005 Enterprise 64bit with Service Pack 2. =================================== Cannot connect to ctbbcysql02. =================================== The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Any help will be greatly appreciated. Regards, Ruaan
View Replies !
Cannot Connect To Reporting Services Using IE Or Sql Server Management Studio
I have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error TITLE: Connect to Server ------------------------------ Cannot connect to BLRPTSQL03T. ------------------------------ ADDITIONAL INFORMATION: The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System) ------------------------------ An existing connection was forcibly closed by the remote host (System) ------------------------------ BUTTONS: OK ------------------------------ I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
View Replies !
Can't Connect To Reporting Services Using Microsoft SQL Server Management Studio
When I try to connect to the Reporting Services using Microsoft SQL Server Management Studio, the following error message propmpts up: _____________________________________________________________ ADDITIONAL INFORMATION: The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient) _____________________________________________________________ Is there any settings that I need to do in the "Reporting Services Configuration Manager" ? Thanks. Best regards, Michael Wu
View Replies !
SQL Server Management Studio Express, Database Explorer In Visual Web Developer Express...which To Use???
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data. Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing). When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server. Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine? Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic? The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
View Replies !
How To Configure SQL Server Management Studio Express To Allow Doing Non-User-Instance/ADO.NET 2.0 From VB 2005 Express?
Hi all, For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only? Please help and tell me what options I should choose in (1) and (2). Thanks in advance, Scott Chang
View Replies !
Import Existing Database Into SQL SERVER EXPRESS Management Studio Express
Hi, I am a newbie so i apologies beforehand for any mistakes i make on this forum. Anyway, i created an asp.net website using the MS Visual Web developer tool. This has a couple of SQL SERVER databases within it. I then latervinstalled the SQL SERVER management studio express in order to manage the SQL SERVER DBs that i had as part of my website but they do not appear within the management studio db list. As this is the express version, is there anyway of importing the existing SQL SERVER dbs that i have to the management studio so i can manage them from there? Regards, Shuja.
View Replies !
Restoring A Sql 2000 Db In Sql 2005 Express Db With Sql Server Management Studio Express
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server When I try to do it I recive the following message: ____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476 ------------------------------ Program Location: in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________ What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
View Replies !
Creating A SQL Server 2000 Compatible .BAK File From SQL Server Management Studio Express
Hi,My webhost (1and1) is running SQL Server 2000 and their web tool supports the import of .bak files. However, when I try to import my .bak files created in SQL Server Management Studio Express I get the following error:"The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database. RESTORE FILELIST is terminating abnormally."I have Googled this error and learnt that 2005 .bak files are not compatible with 2000 .bak files. I'm just wondering if there are any work arounds to this or alternative tools that I can create 2000 compatible .bak files from from 2000/2005 .mdf files.Thanks in advance.
View Replies !
Error Connecting To Remote Server Using Microsoft SQL Server Management Studio Express
Dear All, I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
View Replies !
How Can I Access SQL Server Compact Edition With SQL Server Management Studio Express?
Hello, I just installed SQL Server Compact Edition, since I am considering using it instead of SQL Server Express for a local database in my application. The documentation mentioned that I could use SQL Server Management Studio Express to connect to the Compact Edition and create and manipulate databases. To try to connect, I run Management Studio and bring up the "Connect to Server" dialog. Unfortunately, the pull-down list of "Server name"s does not include the SQL Server Compact Edition server. I do not know how to type in the server name manually, so I cannot connect. To install Compact Edition, I downloaded it and ran "SQLServerCE31-EN.msi". This installed, and I assume registered, a number of DLLs in "C:Program FilesMicrosoft SQL Server Compact Editionv3.1". Is there perhaps an additional step that I left out to complete the installation? Might I need an upgrade to some other components? My Management Studio Version is: - Microsoft SQL Server Management Studio Express 9.00.2047.00 I would appreciate any help you can provide. Thank you, WTW
View Replies !
Using SQL Server Management Studio Tools To Manage Dbs On SQL Server Express Edition
Hopefully a simple question: Is it possible to use Maintenance Plans created on SQL Server Management Studio (installed as part of an instance of SQL Server 2005 Standard Ed.) to back up databases running on an instance of SQL Server Express Edition with Advanced Services? I don't need directions, just whether or not it is permitted. I've been able to create the plans including establishing connections to from SSMS to the the SQL Express instance, but they keep erroring out. I just need to know if this is actually permitted since Maintenance Plans are not available on Management Studio Express Edition. Thank you in advance for your help.
View Replies !
Why Can't I See My Web Developer Express Database From SQL Server Management Studio Express?
Hi, I'm completely new to SQL Server and ASP.NET, so please bear with me on my learning curve! I've installed Visual Web Developer Express and SQL Server Express (on the same PC). I then used Web Developer Express to successfully create a new database with a couple of tables in it. So far so good. I then installed SQL Server Management Studio Express on the same PC and tried to connect to my new database. The connection to the SQL Server instance appears to work OK (using Windows Authentication) but I can't see the database I previously created. All I can see are the System Databases. Does anyone know what the solution might be?
View Replies !
Connecting VB Express Files To SQL Server Management Studio Express
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK. Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what? Please help a newbie Thanks George
View Replies !
Download Of Sql Server Management Studio Express For Sql Server 2008
I just upgraded my Sql Server to 2008 and I was hoping that the link found in this page would provide the download to SSMSE for Sql Server 2008, but it redirects me to 2005 version. I don't any instances running with Sql Server 2005 that I could access through SSMSE 2005, so I can't use it. Does anyone have the link for download to SSMSE 2008? Or should I downgrade? And if, how can I downgrade? Thank you very much, sorry by my misspellings.
View Replies !
Setting Back Up Sql Server Express And The Sql Server Management Studio
I am having a nightmare of a time with my Sql Server 2005 Express. My computer crashed on Friday the 13th - of course. I saved all my files onto another drive and wiped out C: I brought everything back in but I started a new file for my Visual Basic projects. After asking questions I found this was a major no-no So I brought my original folder back in. This solved some of my problems I was having with Visual Studio and Visual Web, but I am continuing to have problems with Sql Server. I will explain these two problem they may be related, I don't know. When I run my Visual Website on a server I get this message: An attempt to attach an auto-named database for file(then my file name)failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. And my second problem is when I attempt to run Sql Server Management Studio Express I get this error message: There is no editor available for (then my file name) .mdf Make sure the application for file type(.mdf)is installed.
View Replies !
SQL Server Management Studio Express 2005 Can't See SQL Server Compact
Hi, I am very new to SQL Compact. I am trying to create one database which can work on the desktop application and also on a pda application. I want to create the database but I am unable to start without Management Studio. Can you guide me to the right tools so that I can create database, view it and manage it use something like Management Studio Express. Also one more question is if my database needs to be at both places on the desktop and on pda how can i synchronise them. PDA will take using c# application data from RFID scans and then i need to sync that database on the desktop so that reports and other info can be generated from the desktop c# application. How to do this? Please can you guide me to any webcasts or labs so i can clarify my doubts about the design. Regards Trushar
View Replies !
|
TRACKER
