Hi,
I am trying to write some simple SQL to join two fields within a table, the primary key is an int and the other field is a varchar.
But i am receiving the error:
'Conversion failed when converting the varchar value ',' to data type int.
The SQL I am trying to use is:
select game_no + ',' + team_name as match
from result
Thanks
I've been trying to return hex data in a way that can be concatenated.
I need the actual hex info (e.g. 0x6E3C070) as displayed
since it contains info about the path to a file.
So I can turn it into D:6E3C 7 to get the path to the file.
In searching around I have come across a way to do this but can't figure out how to get it to run through a column and either display or insert into a table multiple results.
-Here's the user function that converts an integer into a hex string-
CREATE FUNCTION udf_hex_string (@i int)
RETURNS varchar(30) AS
BEGIN
DECLARE @vb varbinary(8)
SET @vb = CONVERT(varbinary(8),@i)
DECLARE @hx varchar(30)
EXEC master..xp_varbintohexstr @vb, @hx OUT
RETURN @hx
END
GO
-Using this table-
create table
XPages
(PageStoreId int null,
HexString varchar (30) null,
VolumePath varchar (60) null, )
--'PageStoreId' contains the data that needs to be converted into the editable hex string
--'HexString' is where I'd like it to go so I can parse it later.
--I can run the below select and get the hex string. But am stuck on how to run a select or update that would run through the 'XPages.PagestoreId'
column and insert the hex string into the 'XPages.Hexstring' column. 'XPages.PagestoreId' could have 100's of entries that need to be converted and placed in the relevant the 'XPages.Hexstring' column.
SELECT dbo.udf_hex_string(1234)
Thanks
Hi,
alter PROCEDURE [dbo].[PPUpdateIWDetails]
(
@CompanyID NVARCHAR(36),
@DivisionID NVARCHAR(36),
@DepartmentID NVARCHAR(36),
@ItemID NVARCHAR(36),
@OrderNo NVARCHAR(36),
@LineNo NVARCHAR(36),
@TAllotedQty Numeric,
@EmployeeID NVARCHAR(36),
@Trndate datetime
)
AS
BEGIN
By default iam passing 12 char itemid as parameter...
Here iam selecting the itemid from InventoryLedger -if it is 8 char than this query should be executed
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
Here iam selecting the itemid from InventoryLedger -if it is 12 char than this query should be executed(both queries are same)
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
I create two tables:
create table table1
(
col1 char(1)
)
go
create table table2
(
col2 char(2)
)
go
I add some records to two tables after createing operation completed.
Then i use dbcc page command to oversee the structures of data page in two tables.
I found some interest things:
The rows in two tabes take up same space:9 bytes
You can see the "9" on top of the data, for example:Slot 0, Offset 0x60, Length 9, DumpStyle BYTE
or calculate from the offset array
Any suggestions?
Need help. How to concat into 1 row from the example below:
Table Address
Block Flr Road
2 1 Green
3 - Maine
4 3 Bell
5 2 Prade
Result :
Block 2 Flr 1 Green Road
Block 3 Maine Road
Block 4 Flr 3 Bell Road
Block 5 Flr 2 Prade Road
Cheers!
is it possible to concatenate 2 recordsets ? i have 2 select, and i need then to be displayed one after other.using union all the results are gathered, ordered like only one select.thanks for all
View 5 Replies View RelatedI'm trying to use a variable (@sqlfields1) for building a select statement.
Can someone please help me because the variable isn't set correctly when I'm trying to concatenate it with itself (the "@sqlfields1"-variable is declared as "char(50)":
If @showo1 = 1
select @sqlfields1 = 'o1,'
If @showo5 = 1
select @sqlfields1 = @sqlfields1 + 'o5'
I want @sqlfields1 to be = 'o1, o5'.
Regards,
Abrazame
Please help me with this if you can.
I have one table with CustomerID and some other data.
In other table i have CustomerID(the link with the first table) and Agent
The relation of the first with the second one is ONE TO MANY.
I want something like this:
Customer,'Agent1,Agent2,Agent3'
Is it possible.
Please help :)
Hey all
Just like the title asks...Is it possible...I have a table that stores memos but breaks the memo text field up and assigns a key to associate it all as one big text field in the application. What I am needing to do is to create a custom table for a customization to have the memo txt in one row per customer, per memo number. So, is there any way to concatenate memotext into one row per memo?
Thanks
tibor
is it possible to concatenate 2 recordsets ?
i have 2 selects and i want to display all results from the first
select and then the results from the second select query
with paging.
if i use union, all the results will be mixed.
thanks for the help!
Is there a way to concatenate the values of a particular field together into one field for all the records in each group of a GROUP BY without using XML?
Ideally, I want to accomplish this in a stored procedure. Normally, I would handle this in the front end, but my front end is Crystal ...
For example, if my data was:
1 "A"
1 "B"
1 "C"
2 "D"
2 "E"
I want to group by the first value and concatenate the second value:
1 "A,B,C"
2 "D,E"
Very easy using code - I simply add a function to the query in Access (not very efficient, but effective), or using recordsets in the app (which is actually very efficient) except my front end is Crystal in this case .
I have a table like so
code remarks
1234 abcd
4567 efgh
I need to concatenate the values in the remarks column into one row like below
abcd, efgh....how is it possible
I have a table like below.
certid name
1 xxx
1 yyy
1 cvb
now I want to output as xxx,yyy,cvb when i pass input certid=1
I want to get it using a single query statement
I hope this is the correct place to ask this...
I would like to concatenate a String value to an Int value using an SQL statement. At the moment it reads like this:
SELECT 'website.com/shop/product.cfm?ProductID=' + Products.ProductID AS Product_URL
But unfortunately I am getting the error:
"Conversion failed when converting the varchar value 'website.com/shop/product.cfm?ProductID=' to data type int."
Any idea how to get around this at all just using an SQL query statement?
-- Prepare sample data
DECLARE@Sample TABLE (ID INT, Code VARCHAR(3))
INSERT@Sample
SELECT290780, 'LT' UNION ALL
SELECT290780, 'AY' UNION ALL
SELECT290781, 'ILS' UNION ALL
SELECT290780, 'AY'
-- Show the expected output
SELECT DISTINCTs1.ID,
STUFF((SELECT DISTINCT TOP 100 PERCENT ',' + s2.CODE FROM @Sample AS s2 WHERE s2.ID = s1.ID ORDER BY ',' + s2.CODE FOR XML PATH('')), 1, 1, '') AS CODES
FROM@Sample AS s1
ORDER BYs1.ID
SELECT DISTINCTs1.ID,
STUFF((SELECT TOP 100 PERCENT ',' + s2.CODE FROM @Sample AS s2 WHERE s2.ID = s1.ID ORDER BY ',' + s2.CODE FOR XML PATH('')), 1, 1, '') AS CODES
FROM@Sample AS s1
ORDER BYs1.ID
SELECT DISTINCTs1.ID,
STUFF((SELECT ',' + s2.CODE FROM @Sample AS s2 WHERE s2.ID = s1.ID FOR XML PATH('')), 1, 1, '') AS CODES
FROM@Sample AS s1
ORDER BYs1.ID
Peter Larsson
Helsingborg, Sweden
I am beggining to learn stored procedures and I am trying toconcatenate the where clause below but I keep getting an error:declare @sqlwhere varchar(15)set @sqlwhere = 'parentid=2'select * from categories where @sqlwhereThis is the error I am gettingServer: Msg 170, Level 15, State 1, Line 3Line 3: Incorrect syntax near '@sqlwhere'.What am I doing wrong?ThanksRod
View 6 Replies View Relatedhi.Trying to concatenate two columns:select uname+' '+uaddress as NameAdr from tblUserI only get the first field, name!!??The datatype is both nvarchar. 100 and 50 chars long.If I run this query:select uname, uaddress from tblUsertheres no problem.Any suggestions?ThanksSWN
View 2 Replies View RelatedHi there,
We are storing dates in a SQL table as dayPublished, monthPublished, yearPublished because sometimes not all the values are available.
I thought something like
select dbo.Resources.monthPublished + '/' + dbo.Resources.dayPublished + '/' + dbo.Resources.yearPublished as fullDate
but it doesn't like my slashes, and if I leave them out it simply adds the three fields together. Boo!
Any ideas?
Thanks,
Megan
Hi,
Whats wrong with the following T-SQL?
DECLARE @SQL NCHAR(4000)
SELECT @SQL = 'xxxx'
SELECT @SQL = @SQL + ' yyyy'
PRINT @SQL
I'm only seeing 'xxxx' in the debug window so it appears that its not adding the 2 strings?
Weird?!?
Hi,
I have a big problem, as I commented in other thread in this forum I Have a DataReader with an MDX query which right now runs out of memory, but I figured that if I made the query by range I could get what I need without running out of memory. However, to achieve that I need to concatenate at the end of a file with a Flat File destination, the result of every query, but I don't know how to do it, It always writes over the data.
Hi
I have a table similar to the following:
Date ID Name Job Number JobType
12/12/2007 123456 Fred Smith 111111 Full Day
12/12/2007 654321 Bob Blue 222222 Half Day AM
12/12/2007 654321 Bob Blue 333333 Half Day PM
I need the following output:
Date ID Name Job Number JobType
12/12/2007 123456 Fred Smith 111111 Full Day
12/12/2007 654321 Bob Blue 222222 Half Day AM
12/12/2007 654321 Bob Blue 333333 Half Day PM
Now before you say the output is the same . It isn't! There are only 2 records in the output. The italic lines are one record, with a carriage return linefeed between each piece of data. So for job number the field is equal to 111111 + CHAR(10) + CHAR(13) + 222222
Could someone please point me in the right direction?
Cheers
Hi All,
I have a very simple question which I can't seem to find an easy way of doing in SSIS. (Alternatively I may be having a "Can't see the wood for the trees" moment )
I have a folder where files are deposited on a regular basis . (Every few seconds)
I want to take those files and concatenate them into a single file in another directory ready for processing.
The equivelent command prompt line would be copy c: estfiles*.* c: estfilescatteddata.dat
How would I be best doing this in SSIS? Also I could do with working out the best way to quiesce the folder so I don't get any locked files errors.
Any ideas?
Thanks
Nick
Is there any way of concatenating 2 fields and a seperator, an id (integer) then "|||" then a nvarchar field, it would make my life much easier if I could come up with SQL that works in ms access as well as sql server.. Thanks
View 7 Replies View RelatedHi all I need some help in concatenatng a string in T-SQL. Having used the Command Microsoft Access inside the 'SQL View' window and typed the following it worked perfectly.
Code Snippet
UPDATE tblValidUsers SET blocked_users = blocked_users + 'name_123@hotmail.com;' WHERE userid='Onam'
However attempting the same command in T-SQL I get the following error:
Msg 403, Level 16, State 1, Line 1Invalid operator for data type. Operator equals add, type equals text.
Reason for having this command is I want to be able to add something to the end of the field "blocked_users" without actually overwriting the fields contents.
So for instance if I had the items: "Item1, Item2, Item3" in blocked_users and I updated it with "Item4" then the value "Item4" would be added to the end thus the use of "+" is used to concatenate. Is there a way of doing this in T-SQL?
Thanks for the help, Onam
I have the below problem:
DECLARE @t TABLE
(
ID int,
Name nvarchar(255)
)
INSERT INTO @t
SELECT 1, 'Raven'
[Code] ....
Returns the below:
ID Name
1 Raven
4 Raven
43 Jack
Any names which are appearing twice I would like to have only one row so concatenate the IDs into one row for each Name, like below:
ID Name
1, 4 Raven
43 Jack
Is this possible?
Hi everyone,
I'm writing a stored procedure where I need to concatenate two XML strings.
I would normally write XMLx = XMLy + XMLz
However because the variables are in XML SQL2005 doesn't like this and if I convert them to strings the XML structure gets lost.
Anyone any ideas ?
Thanks
D.
i have a table
View 1 Replies View RelatedI am creating a random-id in this way:
declare
@rand_id intset @rand_id=(SELECT ABS(CAST(CAST(NEWID() AS VARBINARY) AS INT)))
print @rand_id
now I want to add "-07" to the end of the random number generated.
if 12345 is the random number, i want it to be 1245-07.
Any idea how to concatenate the "07" to this random number?
I would like to concatenate text datatypes. Is this possible??
I'm using field1 + " " + field2
I cannot convert to varchar since the size is larger than 8000.
Thanks, Vic
Hey Folks,
I have a View that I'm using to power a Crystal Report. I want to include an extra column that will be a string containing all the values from a single column of another table, seperated by comma.
So for example:
Project | Staff
----------------------
TestProject1 | "Jonathan, Greg, Joe"
Is this possible? Where do I do it? From the SQL Server end or in the report?
I am trying to concatenate three columns and when one column might be NULL, the result set is NULL. I have set "concat null yields null" to false and the result is the same. Here is my code:
Code:
SELECT lname + ',' + space(1) + fname + SPACE(1) + mname as FullName
TIA
Mike
I have a table within a table that contains descriptions of work done as strings. Some of these need to be edited after a report is generated so it needs to be exported to Excel.
As everyone knows Excel can't process a table within a table so I need a way to concatenate all the separate row entries in the nested table to one Field entry so the nested table is no longer necessary.
Is there a way to recursively concatenate strings from the report designer?
The number of rows that need to be concatenated is variable so it has to be flexible.
Hi,
I am trying to concatenate single quotation mark (ie- ' ) in the select query but not succeed.
If I concatenate word India's, how should I have to write the select query..?
Its just query I have not concern with any specific database.