Connection Issue With Management Console
When i try to connect to Integration Services on a SQL 2005 Machine, it Gives me a Class not registeed.
But i can connect to SQL 2008 Integration Services without a issue.
I tried Restarting the 2008 machine and Also Reinstalling the SSIS Piece and also Reinstalled SQL 2008, but nothing seems to Help.
View Complete Forum Thread with Replies
Related Forum Messages:
SQL Express And Management Console Ctp Issue
So i installed sql express and the management console and have the sql service and browser running. I try to connect to my instance of sql express with the management console and it says it doenst allow remote connections. error: http://img95.imageshack.us/my.php?image=error28to.jpg What do i need to do to be able to use the management console? I was able to connect before but due to some bad advice think i stuffed up the whole thing and had to uninstall sql express and the management console. I re-installed them both but am now getting this error. what the heck is the deal with this? It shouldnt be this hard! This is in relation to an earlier issue i had trying to get to connect to a database from within visual web developer express and now i can connect to my sql express instance but cant get into the managment studio. :(
View Replies !
New SSB-Management Console
Hi, we are currently planning the development of a new SSB-Admin-Tool for SOA environments, which will allow dynamic configuration during MSBuild, register and monitor all services, dynamically configure routes (supporting gateway-servers and services registered on multiple servers for fail-safe). I would like to know if MS is currently working on something similar (the Service-Listing-Manager is buggy, old and seems to be dead on GDN) and what the community thinks.
View Replies !
Server Management Console Only??
Can the Server Management Studio Express be installed on a machine without SQL Server Express? I have a machine that I use daily that I need to access a remote instance but there is not a need (or space) to fully install SQL Server onto the local machine - all I need is the management tool. I tried installing it but the process errors out, saying a pre-requisite (MSXML6) isn't found. It refers me to a site with all the different SQL Server downloads. All I need is the management tool on this machine. Is there a way to do it? Tried loading "MOM" but it doesn't show up either Thanks Paul P
View Replies !
SQL Server 2005 Management Console
We installed SQL Server 2005 x64 on a server for our client here at our office. We can't connect to it using Enterprise Manager. I'm assuming we need to install the management console because of the differences in 2000 and 2005. The install is for a x64 and our workstations are x32. Do I need to get a media kit for a x32 because the x64 install won't work. Where can I get the install for the x32 Management console and will this work?
View Replies !
Connection Issue With Enterprise Manager But Works With Management Studio
Hi,I have an interesting scenario. I have a SQL Server 2000 Standard Edition instance running on Computer A. I'm trying to access it through computers B and C.Computer B has Sql Server 2005 Express Edition installed and I was able to use its Management Studio and connect to instance on Computer A.Computer C has SQL Server 2000 Standard Edition installed. When I try to connect to the instance on Computer A, I get connection failed message.I checked some settings. Both TCP/IP and Named pipes are enabled on the instance in A. The TCP/IP port is set to 1433 for both client and server.Please give me some ideas as to how I can solve this problem. -Thanks
View Replies !
Microsoft Management Console Nice Update!
Hi, There is a tool you can install it to change the behavior of the Management Console, when you double-click on a table it will fire the Return All Rows command instead of the Properties command. I already saw this change but could not know where to get it from, any one of you know it? Thanks,
View Replies !
Management Console In Enterprise Manager Error
hi, I always get DR Watson fir Window NT when I test Operators under the Management console. I have created a new operators and when I go to the property to test the email and the pager notification, I get Dr Watson and Sql Server Enterprise disappear. I am not sure what is going on and if there is someone knows what is going on,please let me know thanks for your help Ahmed
View Replies !
Database Engine Not Displayed By Management Console
I have sql server 2005 express installed on an XP machine. When I browse for a database engine, SQL server 2005 management console displays machinenamesqlexpress in the local tab, BUT in the network tab only the machinename is displayed. Thus, I cannot connect to express from a networked machine. Any help would be appreciated. TIA, Joe
View Replies !
SQL Server Management Console Express And Linked S
Ok so I managed finally to get an Excel Spreadsheet to connect as a linked server. When I right click it , go to run scripts and click on create to i can see the tab of script below: /****** Object: LinkedServer [EXCELLINK] Script Date: 05/17/2008 08:37:04 ******/ EXEC master.dbo.sp_addlinkedserver @server = N'EXCELLINK', @srvproduct=N'Excel', @provider=N'Microsoft.Jet.OLEDB.4.0', @datasrc=N'c:PRICINGFINAL2.xls', @provstr=N'Excel 8.0' /* For security reasons the linked server remote logins password is changed with ######## */ EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'EXCELLINK',@useself=N'False',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'collation compatible', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'data access', @optvalue=N'true' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'dist', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'pub', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'rpc', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'rpc out', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'sub', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'connect timeout', @optvalue=N'0' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'collation name', @optvalue=null GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'lazy schema validation', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'query timeout', @optvalue=N'0' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'use remote collation', @optvalue=N'true' Now I am not sure exactly how to go about querying to pull the data into a table. The table I want to set will have three columns: CREATE TABLE new_price ( item_id CHAR(12), item_lst_lnd_cost DECIMAL(9,2), item_prc_2 DECIMAL(9,2)) the columns in the EXCELLINK linked server spreasdsheet are named the same as the columns above. Once the table is created how do I use the linked server to import the data? Brooks C. Davis IT AdministratorLogistics Manager SFTF LLC dba Ashley Furniture Homestores DELL POWEREDGE 2850 Dual Core Xeon x3 = 1xDB 1xSQL 1xTS | DELL POWEREDGE 2950 Quad Core Xeon = 1xTS | SERVER 2003 | MS SQL 2005 | PERVASIVE EMBEDDED V.9
View Replies !
Microsoft Management Console Snap-In Failed To Initialize
Uninstalled an older version of SQL and installed SQL Express 2005 In Computer Management Dialog box, when you click on Services and Applications, you the following error dialog box: Microsoft Management Console Snap-In Failed to initialize Name: Microsoft SQL Enterprise Manager CLSID{xxxx€¦xxx} (where x is the actual CLSID) Microsoft SQL Enterprise Manager was uninstalled. How do I get rid of this dialog box? Everything is working fine. Thanks Bob
View Replies !
Console Data Connection Problem: Sql Server Doesn't Allow Remote Connections
Hello I have VS 05 professional connected to SQL server express. I am trying to make a simple console connection to northwind database to show the results of a simple procedure. The code is as follows: using System; using System.Data; using System.Data.SqlClient;namespace Chapter6 { class CallSp1 {static void Main() { // create connection SqlConnection conn = new SqlConnection(@"server = .centrinosqlexpress; integrated security = true; database = northwind"); try { // open connection conn.Open(); // create command SqlCommand cmd = conn.CreateCommand();// specify stored procedure to executecmd.CommandType = CommandType.StoredProcedure; cmd.CommandText = "sp_select_employees_details"; // execute command SqlDataReader rdr = cmd.ExecuteReader(); // process the result setwhile (rdr.Read()) {Console.WriteLine("{0} {1} {2}",rdr[0].ToString().PadRight(5),rdr[1].ToString(),rdr[2].ToString()); } rdr.Close(); }catch (SqlException ex) {Console.WriteLine(ex.ToString()); } finally { conn.Close(); } } } } The build indicates no errors but the dos output gives the following error: Error: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does notallow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, BooleantrustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Chapter10.ConnectionSql.Main(String[] args) in D:PROG_DEVVb.NET_devConsoleAppconnectVerifyAppconnectVerifyAppProgram.cs:line 18Connection closed.Press any key to continue . . . BOTH THE CLENT AND DATABASE IS ON SAME MACHINE. THE DATABSE IS centrinosqlexpress as shown in the code. I
View Replies !
SQL Server Management Studio Issue With SP2
I just upgraded my SQL 2005 dev machine to SP2. Now when I attempt to connect to a server, I have no options to choose from (except for <default> in the network protocol list on the Options page. I was previously able to select TCP/IP or Named Pipes here, but they no longer show up. I can't find what is causing this. Suggestions?
View Replies !
Cannot Connect To Sql Server Management Studio - SSL Issue?
We are working with a need to implement SSL and I used the IIS resource kits selfssl.exe tool to create a certification to test somethings on localhost. This worked well and I logged off, went home, logged back on from home via vnc and worked some more. No problems. I then logged off and called it a night. I did not uninstall the personall ssl certificate. At midnight, my machine reboots and defrags. Just including all the 'variables' I can think of. This morning I came into work and noticed that I could not successfully connect to the website. Then I noticed that I was not connecting to Sql Server. I got the error: A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) Okay. So I went to the event viewer and there was a new event, beginning after my reboot at midnight: A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x80090016. So I ran the certmgr.msc tool and removed the certificate from my personal folder. I still could not connect. Not after a reboot, not after stopping and restarting SQL Server, and not after removing the cert via IIS and stopping and restarting IIS.So I decided I would go to Management Studio and test the connection there. I could not connect via Management Studio! If anyone has an experience to lend here, I would be appreciative. Thank you.
View Replies !
Install Issue Can't See T Server Management Studio
I tried several times to install SQL Server 2005 but always bumped into the same issue, there is an error and I can't see the SQL Server Management Studio. The message says "Product : Workstation Components, Books Online and Development Tools Error : A component that you have specified in the ADD_LOCAL property is already installed. To upgrade the existing component, refer to the template.ini and set the UPGRADE property to the name of the component." I had a look at the log file as suggested during the install process but can't understand it. I uploaded it on my server: http://www.corobori.com/SQLSetup0001_ULURU_Tools.log jean-luc www.corobori.com
View Replies !
SQL Server 2005 Management Studio On Vista Issue.
Here is my setup. I have SQL Server 2005 Dev Edition with SP2 installed on Windows Vista Ultimate on my local computer. I have a development cluster running 2000 as well as several production clusters running 2000. The production clusters are accessed through an encrytped tunnel. The dilemna. I am able to connect to the clusters fine. I am also able to access the each DB without incident. My problem comes when I try to connect to DB's with a large number of tables. DB's on the same clusters with around 20 tables come back fine. I am able to start to click on the views drill down and press the stop action and it will display a small list of views. The tables view however, goes into la la land. My local Dev cluster has all the same DB's as my production clusters and has no problems returning the tables in any of the DB's. I get an "IS BUSY: Micorsoft SQL Server Managment Studio is waiting for an internal operation to complete." error and the managment studio never completes. Any help on this would be greatly appreciated.
View Replies !
SQL SERVER 2005 Issue, Cannot Connect Using Management Studio Express
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others Named Pipes Provider, error: 40 - Could not open a connection to SQL Server have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented. when i use osql in command prompt to make a test connection it tells me this [SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. on this forum it says to perform a ping and and an a ping a- to my server which does work. Have been working on this for 3 days and can't figure it out. Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer. I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT! If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-) If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can. Thanks in advance
View Replies !
Connection Management
Hi:I have a Point-of-sale application that uses SQL Server2000 for the backend.Basically, the users perform various functions boiling down to login (checkpassword from a table) and data entry (insert a food entry). Previously, Iwould open a new ADO 2.7 connection to the database each time one of thesetypes of database accessing functions needed to be performed - but I noticedthat sometimes the DB would freeze the application for 20 seconds or so - oreven cause a timeout error.To fix this, I open a DB connection when the application first starts,keeping it open for the life of the application - each time a function needsto access the DB, it just uses the applications (global) connection that isconstantly open and connected.This seems to have fixed the problem, however, I am curious, is this an OKway to handle the connections - keeping in mind that there are four separatestations - each running the application - at the same time. Therefore, Ihave 4 constantly open connections at the same time.Thanks and regards,Ryan Kennedy
View Replies !
Connection Management
hi.. i have like 50 ssis packages,, most of all have the samne conexion to my target server.,, the user an pwd i'm using is the same for all of them... but the pwd has been changed because of security rules,., the result: these packages will no longer execute correctly .. is there anyway i can change this conexion for all the packages without doing it manually? and if so.. how?? thanks!!!!!
View Replies !
Script Component Connection Management
Hello, Greetings, and Happy Friday. I want to check myself in regards to the proper use of connections in a data flow script component being used as a transformation. I want to ensure that the solution is ideal from a performance standpoint, but more importantly that there won't be any resource leaks from connections that are not being closed or objects that are not being disposed properly. This transformation script component is writing to a table based on the rows that pass through Input0_ProcessInputRow(). What I'm doing so far is, in the script component script, I've declared a class-level variable of type System.Data.SqlClient.SqlConnection. In the PreExecute() event handler I am initializing this connection with the following code (which comes after the call to MyBase.PreExecute()): Dim connMgr As IDTSConnectionManager90 connMgr = Me.Connections.JobDB adoConn = CType(connMgr.AcquireConnection(Nothing), SqlClient.SqlConnection) If adoConn.State <> ConnectionState.Open Then adoConn.Open() End If connMgr = Nothing The adoConn variable referred to there is the class-level variable. So, my first questions: Is this the best way to initialize the connection? And is that code checking adoConn.State necessary? Can I pretty much assume that the connection manager is going to give me an open connection? Then in the PostExecute() event handler I have this code (again, after the MyBase call): If Not (adoConn Is Nothing) Then If adoConn.State = ConnectionState.Open Then adoConn.Close() End If adoConn.Dispose() adoConn = Nothing End If Next questions: Is this adoConn variable actually holding a reference to an object whose primary owner is in the connection manager? Is it necessary to close my SqlConnection this way, or is that going to actually close the connection manager's connection? I'm also wondering whether I need to have this same code in the script component's Finalize() handler also...if there's an error I don't want the resource to leak. Or will PostExecute() fire even if there's an error in Input0_ProcessInputRow()? Thanks in advance, Dan
View Replies !
Management Studio Crash, Connection Failure
I have a problem establishing multiple connections in Management Studio. It is hard to describe, but it happens consistently when I try to open a new connection. I can connect to the database engine successfully but when I try to open a "new query" the application just goes away without any errors. Both of these features requires their own connection and currently I cannot open both of them together and constantly have to switch back and forth by closing the tool. There are no messages in the sql error log, event viewer or windows log. I believe it may be a problem with the installation of Management Studio because I only get this problem through my remote connections. I don't encounter this error when I access the server through Management Studio from my workstation and open multiple connections. Has anyone seen this or can someone offer me some direction as to where to look?
View Replies !
Godaddy Server/SQL Management Studio Connection Question
Hello,I just got a personal site with godaddy that I would like to be able to connect to using SQL Server management studioI try to connection using Server Name: sdhfuh928323984ujf.phx3.secureserver.netauthentication: sql serverUsername: my usernamepassword: my passwordThen it tries to connect and gives me an error that I can't and remote connections may not be allowed. I followed the directions it gave and turned on remote connections, restarted the server, but I still get the error.any ideas?
View Replies !
Connection String In The SQL Server Management Studio Express
i want to change the database from access to SQL Server Management Studio Express the old connection string in the asp is <% Set strConn = Server.CreateObject("Adodb.Connection") Provider="provider=microsoft.jet.oledb.4.0;" dbpath="data source=" & Server.MapPath("../data.mdb") Pwd = ";jet oledb:database password=dolunlimit" strConn.open provider & dbpath & Pwd%> i have write the new connection in the SQL server, but it can not work <%Set conn=CreateObject ("adodb.connection")strConn="driver={SQL Server};server=192.168.0.102;uid=sa;Pwd=sa;database=sadb" conn.open strConnSet rs=CreateObject("adodb.recordset")%> can someone tell me what wrong of my coding
View Replies !
Cannot Start MS SQL MANAGEMENT STUDIO EXPRESS AND CANNOT CREATE DB CONNECTION
Hi, I keep getting this message when starting the MS SQL MANAGEMENT STUDIO EXPRESS: TITLE: Surface Area Configuration ------------------------------ Failed to connect to server localhostSQLEXPRESS. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ ADDITIONAL INFORMATION: A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (Microsoft SQL Server, Error: -2146893019) ------------------------------ My server was up and running but I'm having trouble creating a new datbase connection so was troubleshooting and maybe i did something i wasnt' suppose to :-( I still have the problem for creating a db connection and now my server doesn't want to start! Please helpppp!!! Please please please someone! help me!! Thank you!! Soen
View Replies !
Cannot Open Connection Dialog When Starting SQL Server Management Studio
I start SQL Server Management Studio on my workstation and get the following message. TITLE: Microsoft SQL Server Management Studio ------------------------------ Failed to open connection dialog. ------------------------------ ADDITIONAL INFORMATION: Could not load file or assembly 'SqlMgmt, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (mscorlib) ------------------------------ BUTTONS: OK ------------------------------ I had SQl Express version installed previously and everything worked. I could connect to one server running SQL Express and a different server running full up SQL 2005 enterprise version. I uninstalled All SQL express programs and installed tools from SQL 2005 developer. I have rebooted, started the program directly (not using a link of any kind) and all attempts fail. After dismissing the error msg the tool opens and I can run queries agains the DB but the database engines and related tables do not show. My work station is Windows XP with SP2 installed. I have googled the problem extensively and tried solutions found but none have solved the problem. Any help greatly appreciated.
View Replies !
Database Connection Error In SQL Server Management Studio Express
Hello, We are trying to connect the data base in SQL Server Management Studio Express using Operating System Xp. The following error show during the connection time. " Cannot open database "Test" requested by the login. The login failed. Login failed for user 'NT AUTHORITYSYSTEM'. We have the login Id for sa and password. Connect to server it work properly. Could you please give me the steps to resolve the problem. Thanks, Mahesh
View Replies !
Reporting Services 2005 And SQL Server Management Studio Connection Error
I have installed multiple instances of SSRS on same server with different database. I can go to the report server URL for both SSRS and run reports. But I cannot connect to the 2nd instance through "SQL Server Management Studio". Also I am getting following error when I try to connect to the "Reporting services configuration" tool from a remote machine Code Block See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.get_IsSharePointIntegrated() at ReportServicesConfigUI.ConfigurationManager.ResetStepStatus() at ReportServicesConfigUI.ConfigurationManager.ChangeMachine() at ReportServicesConfigUI.ConfigurationManager.LaunchDialog() at ReportServicesConfigUI.ConfigurationManager.OnActivated(EventArgs e) at System.Windows.Forms.Form.set_Active(Boolean value) at System.Windows.Forms.Form.WmActivate(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- RSConfigTool Assembly Version: 9.0.242.0 Win32 Version: 9.00.3042.00 CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/RSConfigTool.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Management Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll ---------------------------------------- System.ServiceProcess Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View Replies !
Connection To SQL Issue Plz Help
Hi I am trying to connect to MS SQL, but I do now know what the problem is. I get an application error. I have this on the top of my page: <%@ Page Language="VB" %> <%@ Import Namespace="System.Data.SqlClient" %> And this in the middle: <script runat="server" language="VB"> Sub Page_Load() Dim objConn as New SqlConnection( _ "Server=myserver;" & _ "Database=myuser;" & _ "User ID="myuser;Password=mypassword") Dim objCmd As New SqlCommand("SELECT * FROM Categories", _ objConn) objConn.Open() Dim objRdr As SqlDataReader = objCmd.ExecuteReader() While objRdr.Read() Response.Write("<a href="Smilies.aspx?CatID=" & objRdr.Item("CategoryID") & "">" & objRdr.Item("Category") End While objRdr.Close() ObjConn.Close() End Sub </script> It is not highlighting that code either in visual studio. What is wrong?
View Replies !
Connection Issue
Hi, We've inherited a number of SSIS packages from a former employee that need to be updated due to connection issues. When I add one of the packages to a new project and try to make a change to a connection that change does not show when I deploy and then schedule a job for that package in SQL server agent. If I check the connections in the job the old connection string still exists. If I run the job it fails, but if I run it directly in SSIS it works fine. Is there a setting or something that's preventing me from changing the OLE DB connection? I can make changes to everything else within the package except the connections. I tried changing the ProtectionLevel on the package but that doesn't help. Thank you in advance for any assistance! Kevin
View Replies !
ADO Connection Issue
Hello All, I have made a small application on my system in delphi v7 that uses the ado connetion components and works fine on the remote sql server db. But my client gets a "cannot find server" on his system with the sql server/db local. My connection string this... Provider=SQLOLEDB;Password=password;Persist Security Info=True;User ID=USER;Initial Catalog=MyDB;Data Source=SERVER01; his connect is... Provider=SQLOLEDB;Password=password;Persist Security Info=True;User ID=USER;Initial Catalog=MyDB;Data Source=HISSERVER01APP; I have changed the Data Source to (local) and local, as seen in another post but this had not effect. We have check his MDAC version verse mine and they are the same, save he has sp3; I have sp1. ...any ideas?
View Replies !
Connection Issue
I am a novice and have SQL 2k5 installed on my server running windows SBS 2003. I am able to connect to the database from my workstation and I am able to view all the fields of the database but I am not able to view any of the records contained in the database. Can someone please guide me. I need to be able to view add and delete records using Access as a front end program to SQL. Thank you.
View Replies !
Connection Issue
not sure where to post but i have been running vb script for years and suddenly on many of my work pc's i have started to get this error when trying to connect to a sql server on the internet. Microsoft OLE DB Provider for SQL Server: [DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found. i cannot find anything that resolves this. any ideas?
View Replies !
Connection Issue
Hi, I have installed a SQL 2005 serers on a windows box which already has SQL 2K. When I try to connec to the instance via query analyser in a different computer, I am getting two different behavior:- 1) If the remote computer is in the same subnet mask as the sql server box, the conenction is successful 2) If not, the conenctions fails with the following error:- SQL Server does not exist or access denied Msg 17, Level 16, State 1 I have made the SQL 2005 the default instance on port 1433. Any pointers to the solution is appreciated. Thanks.
View Replies !
Connection Issue
I am running SQL Express on server 2003. there are 5 PC that connect to a database but only 2 can connect and the other 3 are saying that the database does not exist I can ping the server name fine. I have tried sql server managment studio on the 3 pc and still can not connect
View Replies !
SQL Server Connection Issue
I am renting some server space from a web hosting company. They suggest that I usethe following connection strings to connect to my SQL server 2005 database. I have notattempted to do this,becuase it all appears wrong to me. If I am using ADO.NET,why would I be dealing with OLE DB or ODBC connections type strings. Can someonelook at the suggestion made below and tell me if it makes any sense?Note that I am using C# and asp.net 2.0 Use the following connection string to connect OLE DB connection string (DSNless Connection):"Provider=SQLOLEDB;Data Source=SQL-Server-IP;User Id=DB_user_id;Password=Db_pwd; Initial Catalog=Your_DB_Name;" ODBC connection string (Requires a ODBC to be created first):"DSN=ODBC_Name;User Id=DB_user_id;Password=Db_pwd;Initial Catalog=Your_DB_Name;""
View Replies !
ASP - SQL Server Connection Issue
Hello All, I am building an application using SQL server 2000. When I was using SQL database on my local machine it works great but now I moved the database on the server and as soon as I try to connect it gives me this error message. What I am doing wrong? An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) * * Thanks
View Replies !
Remote Connection Issue
I have researched over and over on how to solve the error code below. I have tried every suggestion under the moon and still get the same error. Please provide some insight. Here is exactly what I have done regarding the remote connection issue: Error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) History: 1. Created a test site on my local machine (using MS Visual Web Developer 2005 Express Edition) call WebSite8 for test purposes. 2. Simply created a single page to allow users to create an account by dragging and dropping the CreateUserWizard onto the designer screen. 3. Performed some basic formatting (font, theme, etc) on the web control. 4. Ensure that TCP/IP and allow remote connection defaults were changed to allow remote connections. 5. Verfied that the login control worked on my local machine. Everything worked fine. I was able to create two new users and was sent to the "complete" portion of the control. 6. Opened the aspnet_memberships and aspnet_users databases to ensure that the two test accounts were created.....everything good so far. 7. Copied all files from WebSite8 (1. App_Data Folder - includes ASPNETDB.MDF file created by Developer when I dragged and dropped the CreateUserWizard onto the designed sreen, 2. the main asp web page I called createaccount.aspx, and 3. web,config file) via ftp to my test web site hosted by 1and1. My test web site is named something different that WebSite8. 8. I created a test.htm page on the 1and1 web site to link to the createaccount.aspx page which is in the same path as the test.htm. 9. The process let me enter the user name, password, etc but when I hit submit, I get the error listed below. 10. Followed some other research suggestions and verified that ApplicationName in the aspnet_Membership was set to "/". It is. 11. I checked the web.config file and it does not seem that any connection strings were created when I dragged the CreateUserWizard onto the screen. Not sure if this is an error on this control or not or if it is ok as is(?) I believe there is some sort of issue on the hosted web site where the sql server is not linking to the database on the hosted site and is likely trying to link back to my "local" server......just a feeling. I have tried everything that I can think of after performing relentless research on this error. I am new to database programming, ASPNET 2.0, SQL, etc but I catch onto things very quickly.
View Replies !
MSDE Connection Issue
When trying to connect to a local MSDE database using an ASP application I recieve the following error when using integrated security. con.ConnectionString = "server=HNT1PC0281;database=test;Integrated Security=SSPI" Login failed for user 'HNT1PC0281ASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'HNT1PC0281ASPNET'. This String work in a C# application, but not ASP using VB. Source Error: This occurs on the con.Open() statement When using a loginname/password I recieve con = New SqlConnection("Server=HNT1PC0281;uid=sa;pwd=something;database=test") Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection. Source Error: Let me know if you have any ideas... Thanks,
View Replies !
|
TRACKER
