DB Connection From Visual Studio 2003 To Sql Server 2005
I have one computer running Visual Studio 2003, and another running SQL Server 2005. I am trying (unsuccessfully) to add a connection to a sqlDataAdapter from an application in the Visual Studio 2003 computer to the db on the SQL 2005 machine.
If I go to the machine running sql 2005, where I am running visual Studio 2005, I can create this connection with no problems.
Is there a way fromvisual Studio 2003 to create a sqlDataAdapter with a connection to SQL 2005?
View Complete Forum Thread with Replies
Related Forum Messages:
Can't Connect To Sql Server Database With Same Connection Used In Visual Studio .net 2003
I have the following code that works fine in visual studio .net 2003 but not with VWD. I have sql server 2000 developer edition installed locally and this connection works fine with visual studio. With VWD it fails with the exception "System.Data.SqlClient.SqlException: Login failed for user 'DARRELLASPNET'". It fails on the conn.Open line. any ideas on what the issue is?Dim conn As SqlConnectionDim connstr As Stringconnstr = "Data Source=DARRELL;Initial Catalog=Event;Integrated Security=SSPI;"Dim daEvents As New SqlDataAdapter("select * from events", connstr)Dim ds As New System.Data.DataSet conn = New SqlConnection(connstr)conn.Open()daEvents.Fill(ds) conn.Close()conn.Dispose()
View Replies !
Can I Use MS SQL Server Express 2005 In Visual Studio 2003?
I have been experiencing troubles since I was decided to install SQL Server Expr 2005 in my PC, first I needed to remove the .NET framework 1.1 in my computer because it is suggested before installing sql server expr 2k5 that cause my vs.net 2003 to stop loading because sql express runs in .NET framework 2.0 and vs.net 2003 is in .Net Framework 1.1 then what I did is to install .Net Framework 1.1 in my PC together with .Net Framework 2.0 and my vs.net started runnning again. My problem now is when I try to connect to a database using Data Link Properties in the Server Explorer it says "[DBNETLIB][ConnectionOpen](Connect()).]Sql server does not exist or access denied." how could this happen if I can see the sql server in the Server Explorer in my VS.net environment? Please somebody help me I am just learning to this language and I think I cannot proceed to the next few chapters remaining because of this. Thank you very much!
View Replies !
Connect To SQL Server 2005 From Visual Studio 2003
hello all, i have SQL Server 2005 installed on a network computer and want to access it through code in asp.net. I am using visual studio 2003. I have porvided this connection string to connect to that Sql Server 2005 Express instance but failed: data source=mynetworkstystemSQLEXPRESS;database=MobMatiLogs;User Id=sa;password=mobmasti786 But I get the error: SQL Server does not exist or access denied. Anyone please help me! Thanks in advance
View Replies !
Whether SQL Server 2005 Express Edition Can Work With Visual Studio 2003 (Ver 1.1)
We are new to SQL Server 2005 Express Edition. We are going to develope a solution for one of our client and we have to decide on which database to use for the solution. Client wanted to have a low cost solution. Thus we were not in a position to push them for SQL Sever 2000. In the process, we also thought of having MySQL as one of the option. Another option we have is to use SQL Server 2005 Express Edition. We wanted to know if SQL Server 2005 Express Edition can be used with Visual Studion 2003 (Ver 1.1) or it can only be used with Visual Studio 2005 (Ver 2.0)? Hope to get feedback soon. Regards Sanjeev
View Replies !
Using Visual Studio 2003 With Sql Server 2000 And Planning To Switch To Sql Server 2005
We have a project already developed iusing VS 2003 Enterprise architect edition using sql server 2000(have lots of table and stored procs etc.) Now planning to switch to Sql server 2005 are there any issues associated with the switch. I mean front end programming wise asp.net and vb.net front end codes do they work straight away or need to make any changes to all the front end codes, we are using datasets, data readers calling stored procs and also using lot of hash tables and XML object to make bulk loads to sql server via sqlxml3.0 sp3. Please help thank you very much for the information.
View Replies !
SQL Express 2005 With Visual Studio 2003
I am just starting to work with Visual Studio and SQL. I have Visual Studion 2003 with .net Framework 1.1. I want to download the SQL 2005 Express version and it requires the upgrade to .NET Framework 2.0 Will this affect my Visual Studio 2003? And can I use SQL 2005 with Visual Studio 2003? Any help would be appreciated. Thanks,
View Replies !
SQL Server 2005 And Visual Studio @005 Connection Problem.
I installed the SQL Server 2005 Trial and am now having trouble connecting. When I bring up the ASP.NET Configuration tool and Go to "Provider configuration" "Select a single provider for all site management data" AspNetSqlProvider Test I get the following message. "Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. " I have already run the aspnet_regsql command-line utility. Can anybody give me some information on how to set this up. I am currently working with the club web site starter kit.
View Replies !
SQL/CLR Debugging Hangs On Visual Studio 2003 And SQL 2005
I am unable to debug code from a SQL Database Project using the CLR. After VS 2005 does the auto-attaching to the SQL server, VS hangs until I tell it to stop debugging. Many others have reported this as a similar problem, however this only seems to affect me when I€™m connecting to specific servers. Specifically it seems to be remote connections. When I attempt to connect to my SQL 2005 Developer Edition €œlocally€? I get right through and can debug. From my VS output window: Auto-attach to process '[1688] [SQL] gx620-eric' on machine 'gx620-eric' succeeded. Debugging script from project script file. testing No rows affected. (0 row(s) returned) Finished running sp_executesql. The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0). The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0). The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0). The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0). The program '[1688] [SQL] gx620-eric: gx620-eric' has exited with code 0 (0x0). When I attempt to connect to a remote server running Enterprise Edition, it hangs after a successful attach. Auto-attach to process '[1856] [SQL] virtual2003eric' on machine 'virtual2003eric' succeeded. Sometimes after countless attempts, I am able to get this to work, but lately I have had no success. As far as the SQL Server side, enabling and disabling the CLR through the Surface Area Configuration seems to be the only place to do anything relative to the CLR inside SQL server. I have firewalls disabled. All SQL Servers presently have both SQL 2005 SP2 and Visual Studio 2005 SP1 installed. I€™ve tried restarting servers and services, checking and un-checking €œAllow SQL/CLR Debugging€? and those steps did not work for me. Does anyone have any insight on this one? Any ideas on how I can further debug this one? Thanks. Eric
View Replies !
SQL 2005 Express And Visual Studio 2003 - Connecting
I have Visual Studio 2003 and had used it successfully with MSDE. I recently upgraded to SQL 2005 Express and cannot seem to connect to the SQL server. it appears in the list of servers on localhost, but when I try to create a new database it tells me that it "cannot create databases on this server." It will not even open up any existing databases. I have .NET 2.0 installed. I uninstalled SQL and reinstalled it, but nothing seems to help. I feel I must be missing something, but do not know what. I no longer have the MSDE installation files, so I hope I can get Studio to talk to SQL Express. Any help is appreciated.
View Replies !
How To Run SQL 2005 Report Designer With XP And Visual Studio .Net 2003
I´ve read that it´s possible to use SQL server 2005 - Report Designer even if you only have Visual Studio .Net 2003. But my question is where can I find/open this program. I´ve installed all the developer programs from the CD´s (SQL 2005 Server Developer edition). The shortcut in startmenu -> Programs -> Microsoft SQL Server 2005 -> SQL Server Business Intelligence Development Studio referering to C:ProgramMicrosoft Visual Studio 8Common7IDEdevenv.exe wich does´nt exist....cause I don´t have VS 8. And if I´ll point to devenv.exe in under the "Microsoft Visual Studio .Net 2003" -folder it won´t show any templates or wizard for Report Designer.
View Replies !
Creating A New Connection With Microsoft SQL Server 2005 Compact Edition From Visual Studio 2005 IDE
Hello, How are you? I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE? I appreciate your help€¦
View Replies !
SQL Server Connection Issue! Visual Studio 2005 Used To Connect!
Hello, I'm using Microsoft Visual Studio to remotely connect to my database for the project I am working on. I always get the same error, when I try to connect: Code Snippet An error has occurred while establishing a connection to the server. When connecting to the SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to the SQL Server) So, I decided to ping the server to see if any packets were being sent back to me, on the command prompt. 4 of my packets were sent to the server. 0 were sent back. Code Snippet Pinging sq15.bravehost.com [172.16.0.229] with 32 bytes of data Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 172.16.0.229: Packets: Sent = 4, Recieved = 0, Lost = 4 (100% loss), So, does the database not allow incoming connections, or am I missing something? Thanks for the help in advance, Dustin.
View Replies !
SQL Server 2005 Connection String In Visual Studio 2005
Hey I need to know what shall i specify in this connection string in visual studio web.confug file inorder to connect to ma registered server (locally) not directly to my dedicated server ....cuz i am facing network connection problems .... b4 i used to use this connection string : <add key="conn" value="data source=IP addresseel,1433;initial catalog=xxx;user id=username on the dedicated server;Password=password on the dedicated server;timeout=60"></add> So how can i change it ???? to be able to connect locally ???? Please Help ???! Thanks in advance Hiba
View Replies !
Connecting To SQL Express 2005 Via Web.Config File In Visual Studio 2003
Hi I am following a project to build a small E-Commerce site from a book I have purchased and I have having problems connecting to the SQL Database with the code supplied. The book is Apress Beginning ASP.NET 1.1 E-Commerce http://www.amazon.co.uk/Beginning-ASP-Net-1-1-E-Commerce-Professional/dp/1590592549/ref=sr_11_1/202-7684451-7995058?ie=UTF8&qid=1193780707&sr=11-1 The code added to the Web.Config file is : <configuration> <appSettings> <add key="ConnectionString" value="Server=(local)NetSDK;Integrated Security=True;Initial Catalog=JokePoint" /> </appSettings> The connection details are in a class file called Catalog.vb and is as follows Imports System.Data.SqlClientPublic Class Catalog Public Shared Function GetDepartments() As SqlDataReader 'Create the connection objectDim connection As New SqlConnection(connectionString) 'Create and initialize the command objectDim command As New SqlCommand("GetDepartments", connection) command.CommandType = CommandType.StoredProcedure 'Open the connection connection.Open() 'Return a SqlDataReader to the calling functionReturn command.ExecuteReader(CommandBehavior.CloseConnection) End Function Private Shared ReadOnly Property connectionString() As String GetReturn ConfigurationSettings.AppSettings("ConnectionString") End GetEnd Property End Class The error is..... Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'.Source Error: Line 15: 'Open the connection Line 16: Line 17: connection.Open() Line 18: Line 19: 'Return a SqlDataReader to the calling function Source File: C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb Line: 17 Stack Trace: [SqlException: Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() JokePoint.Catalog.GetDepartments() in C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb:17 JokePoint.DepartmentsList.Page_Load(Object sender, EventArgs e) in C:MyCommerceSiteJokePointUserControlsDepartmentsList.ascx.vb:44 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Control.LoadRecursive() System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain() The connection tests ok in Visual Studio 2003. All permissions are set using SQL Management Studio Express 2005. The book is using SQL 2000, I have been trying different connection syntax's in the Web.Config file all day and now I have a big headache. I know its something simple, can anyone please advise ? Thanks in advance. Mark
View Replies !
Visual Studio 2003 And SQL Server Express
I'm attempting to connect to my SQL Server Express instance through Visual Studio 2003. When I go to Data Connections, I choose the Microsoft OLE DB Provider for SQL Server, then fill in all the parameters for my server (server name, username, password, database). When I click "Test Connection" it goes through successfully. When I click "Ok" to create the Data Connection, it fails saying that the username and password should be checked. I changed the username and password to the "sa" account I created when I installed SQL Server Express, and got the same successful connection test, but failure when it tries to create the connection. Any suggestions? Thanks!
View Replies !
SQL Server Mobile With Visual Studio 2003
I've recently noticed the availability of SQL Server Mobile, and would like to take advantage of some of the new features, however, I'm currently using Visual Studio 2003. The requirements state that Visual Studio 2005 is required, but I was wondering if anyone has had any success getting it to work with VS 2003? I hope that I can do this with VS 2003, but if VS 2005 will be required, I'd like to clear up a few issues before asking my workplace to fork out more money for the upgrade: What have your experiences been like in getting clients to upgrade from SQL Server CE to SQL Server Mobile? I've seen some postings regarding problems with specific devices which seem a bit worrying, but I was wondering how easy it was in general. Does SQL Server Mobile really do a good job of reclaiming wasted space? Using SqlCeEngine's Compact method has caused problems due to the required storage space to perform the operation. The documentation states that using SQL Server 2000 with SP3A is supported, but I was wondering if anyone has any experience with this? Thanks in advance, Adrien.
View Replies !
Does Visual Studio .NET 2003 Contain SQL Server Report Service?
Hello, everyone: Some papers introduce that SQL Server Report Service is intergrated in Visual Studio .NET 2003 as Business Intelligence Project in New Project. However I cannot find out Business Intelligence Project after I installed Visual Studio .NET 2003 (Full install). Are there different versions of Visual Studio .NET 2003 contain SQL Server Report Service? Thanks ZYT
View Replies !
Need Help To Get Visual Studio 2003 To Connect To SQL Server 2000
I need help setting up my laptop so that I can develop using Visual Studio 2003 and SQL Server 2000. I currently have both installed on my laptop but can not get them to play nicely together. Here is my connection code: //string strConnection = "Provider=Microsoft.Jet.OleDb.4.0;"; //strConnection += @"Data Source=C:BegASPNET11ch12Northwind.mdb"; //Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=guest;Initial Catalog=Volkswagen;Data Source=DEREKLAPTOP;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=DEREKLAPTOP;Use Encryption for Data=False;Tag with column collation when possible=False string strConnection = "Provider=SQLOLEDB.1"; strConnection += @"Data Source=C:Program FilesMicrosoft SQL ServerMSSQLDataorthwnd.mdf"; ////strConnection += @"Data Source=DEREKLAPTOP"; data_src.Text = strConnection; string strSQL = "SELECT FirstName, LastName FROM Employees"; DataSet objDataSet = new DataSet(); OleDbConnection objConnection = new OleDbConnection(strConnection); OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection); objAdapter.Fill(objDataSet, "Employees"); DataView objDataView = new DataView(objDataSet.Tables["Employees"]); dgNameList.DataSource=objDataView; dgNameList.DataBind(); Here is the error message I get in IE: No error information available: REGDB_E_CLASSNOTREG(0x80040154). Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: No error information available: REGDB_E_CLASSNOTREG(0x80040154). Source Error: Line 18: OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection); Line 19: Line 20: objAdapter.Fill(objDataSet, "Employees"); Line 21: DataView objDataView = new DataView(objDataSet.Tables["Employees"]); Line 22: dgNameList.DataSource=objDataView; Source File: C:BegASPNET11ch12datagrid.aspx Line: 20 Stack Trace: [OleDbException (0x80040154): No error information available: REGDB_E_CLASSNOTREG(0x80040154).] [InvalidOperationException: The 'SQLOLEDB.1Data Source=C:Program FilesMicrosoft SQL ServerMSSQLDataorthwnd.mdf' provider is not registered on the local machine.] System.Data.OleDb.OleDbConnection.CreateProviderError(Int32 hr) +81 System.Data.OleDb.OleDbConnection.CreateProvider(OleDbConnectionString constr) +107 System.Data.OleDb.OleDbConnection.Open() +203 System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44 System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +36 ASP.datagrid_aspx.Page_Load() in C:BegASPNET11ch12datagrid.aspx:20 System.Web.Util.ArglessEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +10 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +750 Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032 I know that my problem is in the @DataSource part of the connection string. It works if I use the first two lines (the database file is in the same folder as the code). But not when I use it as above. I think I'm pointing to the wrong place, but I can't figure out the right place to point to. I have SQLServer running on my laptop (I think), so can anyone help me out or maybe give me some example connection strings that you have used? Thanks. Derek
View Replies !
Connection Timeout In Visual Studio 2005(Reporting Services)
Hello. I am having problems with a couple of queries in the Development Studio (Reporting Services 205). I am working on a report that runs a lot of functions so I expect it to be slow. But it times out in 30 seconds. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The report finishes when clicking on the preview tab but not when on the data tab. If finishes fine when deployed as well. Is there a way to increase the amount of time the query designer in Visual Studio takes to time out on a query? I have tried setting the Connect Timeout=60 on the Data Source but it seems to be overridden by a setting in Visual Studio 2005. Thanks much for any help. Leo
View Replies !
Help With Connection String After Clickonce Install From Visual Studio 2005
I have a sql express .mdf that is located in c:appdirectorymydb.mdf whilst developing an application. During development my connection string uses the above path to connect to the db. e.g. "server = .sqlexpress; Integrated Security=True; database=C:appdirectorymydb.mdf" I have published the app using click once in visual studio.net which places the db in : C:Documents and Settingsuser.nameLocal SettingsApps2.0DataJN1WL1DJ.X7B ... 08ed2810aab2abData When i am executing the application following a clickonce install, what should I use in my connection string for the path to the db ? or where can I find the above path (e.g. in the registry) so that I can provide it to the connection string ? Alternatively, can I specify where the DB is going to be installed (via click once). e.g. in my app directory under program files ? I have tried searching what seems like everywhere for a solution to this problem and as a last resort thought it worth posting the question. Many thanks in advance. Simon
View Replies !
Visual Studio 2005 The Remote Connection To The Device Has Been Lost. Please Verify The Device Connection And Restart Debugging.
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get The remote connection to the device has been lost. Please verify the device conection and restart debugging. I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back! My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1. Does anyone know how to resolve this problem?
View Replies !
MS Visual Studio 2005 Vs SQL Server Business Intelligence Development Studio
I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)? Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
View Replies !
Visual Studio 2005 Standard And SQL Server Management Studio?
I am new to visual studio and I am still not sure of all its components and features. I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio? I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional? I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool. How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase. Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology. My goodness, it seems I still have so much to learn. Thanks
View Replies !
Using RMO (Merge) In Visual Studio 2003 (.NET 1.1)
Hello, is there any way to use RMO in .NET 1.1 application? Using "native" RMO is obviously unavailable (Microsoft.SqlServer.Replication namespace is not present in "add reference" dialog box in VS2003). I tried using ActiveX object (SqlMerge class v. 9.0 in sqlmergx.dll), but execution of Run() fails and "2.0 is not valid version" exception is thrown. For some reasons I must write application running in 1.1 Framework that allows synchronizing SQL 2005. And I mustn't use command line agent executable... Thanks in advance Kuba
View Replies !
WTB:Visual Studio Tools For Office 2003
License requiredMaybe you don't have this but have one of the products thatqualifies for the upgrade such as ...Visual Studio .NET 2003 ProfessionalVisual Studio .NET 2003 Professional Special EditionVisual Studio .NET 2003 Enterprise ArchitectVisual Studio .NET 2003 Enterprise DeveloperVisual Studio .NET 2002 Professional EditionVisual Studio .NET 2002 Enterprise DeveloperVisual Studio .NET 2002 Enterprise ArchitectVisual Studio 97 Enterprise EditionVisual Studio 6.0 Professional EditionVisual Studio 6.0 Enterprise EditionVisual Basic 5.0 (or later) Professional EditionVisual Basic 5.0 (or later) Enterprise EditionVisual C++ 5.0 (or later) Professional EditionVisual C++ 5.0 (or later) Enterprise EditionVisual InterDev 1.0 (or later)Visual J++ Professional Edition 1.1 (or later)Visual FoxPro 5.0 (or later) Professional EditionVisual SourceSafe 5.0 (or later)Visio 2000 Enterprise Editionthat you are willing to part with for some cash.Dan Thomas
View Replies !
Hide A Parameter Using Visual Studio 2003
I am using Visual Studio 2003 and would like to create a hidden parameter that will be substituted into an MDX expression. The parameter would be based on the value of another parm which would be input by the user. For example, The user would select current year "2007" and my hidden parm would need to calc to "2006". I have coded the default value of my expression to reflect current year - 1, however I can't get the "hidden parameter" to be invisible on the prompt screen. Is this possible? I already have many parms on the screen and don't want to clutter with additional info the users don't need to enter. Thank you, PB
View Replies !
Suppress Rows With No Data In Matrix Report - Visual Studio 2003
I would like to suppress all of the rows in my Matrix report that have either NULL or 0 data. I know how to apply a filter in a table report to accomplish this. However, I'm not sure how to do this in with a matrix because I need to filter if the subtotal in the row is 0, and the subtotal is generated by Visual Studio. There is 1 data value which expands across 4 columns with a subtotal at the end of the row. I tried referencing the subtotal at the end of the row with a "Report!Item" expression, but Visual Studio tells me I can't reference a "Report!Item" in a filter. Does anyone know how to do this with Visual Studio 2003? Note: My data is coming from an AS400 file. For simplicity, It consists of a description, an amount, and a flag which indicates a category. The category flag is the grouping across the top, the descripion is down the side of the report. Data sample: desc. amount category paper 5.00 1 paper 7.00 2 paper 4.00 3 paper 6.50 4 Matrix: descr 1 2 3 4 Total Paper 5.00 7.00 4.00 6.50 22.50 Thank you, PB
View Replies !
Sqlcommand And Visual Studio Net 2003 Code To Update A Record With A Click Of Button.
Hello to everyone, I have this problem If I use this code when I try to update a record in my sql database It does not do anything. This is the code. Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim myconn As New SqlConnection("Data Source=.;Initial Catalog=SistemaIntegral; user id=sa") Dim mycmd As New SqlCommand("presup", myconn) mycmd.CommandType = CommandType.StoredProceduremycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.textmycmd.parameters.Add(New SqlParameters("@txtForig", SqlDbtype.varchar,50)).Value=txtFOrig.textmycmd.parameters.Add(New SqlParameters("@txtFmod", SqlDbtype.varchar,50)).Value=txtFmod.textmycmd.parameters.Add(New SqlParameters("@txtFeje", SqlDbtype.varchar,50)).Value=txtFeje.textmycmd.parameters.Add(New SqlParameters("@txtPorig", SqlDbtype.varchar,50)).Value=txtPorig.textmycmd.parameters.Add(New SqlParameters("@txPmod", SqlDbtype.varchar,50)).Value=txtPmod.textmycmd.parameters.Add(New SqlParameters("@txtPeje", SqlDbtype.varchar,50)).Value=txtPeje.text mycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.text myconn.Open() mycmd.ExecuteNonQuery() myconn.Close() mycmd.Dispose() myconn.Dispose() End Sub This is the code for the procedure called "presup" in SQL 2000 Server.CREATE PROCEDURE [presup](@txtClave [int],@txtForig [varchar](50),@txtFmod [varchar](50),@txtFeje [varchar](50),@txtPorig [varchar](50),@txtPmod [varchar](50),@txtPeje [varchar](50),@txtIdPresupuesto [int])as Update [Presupuesto]Set [IdClave]=@txtClave,[orig]=@txtForig,[moda]=@txtFmod,[ejer]=@txtFEje,[origr]=@txtPorig,[modar]=@txtPmod,[ejerr]=@txtPejeWhere ([IdPresupuesto]=@txtIdPresupuesto)GO When I click the Update button of my webform it does not do anything. Please Help me I am new to Visual Studio.Net 2003. (2 weeks ago I started using Visual Studio)
View Replies !
I Need To Add A Row To A SQL CE Database If It Does Not Exists.I Am In Visual Studio 2005 Using Visual Basic 2005.
I need to add a row to a SQL CE database if it does not exists using Visual Basic 2005 in Visual Studio 2005. I can't seem to find the duplicate record using a tableadapter query. It adds the same record again. I am trying to use tableadapters, but do not have to. Any suggestions? Here is the add row code I am using... checkCustRow = PcDatabase1.MainToolData.NewMainToolDataRow() checkCustRow("Name") = "" checkCustRow("Size1") = cmbSize1 checkCustRow("Size2") = "" checkCustRow("Size3") = "" checkCustRow("Size4") = "" checkCustRow("Pressure1") = cmbPressure checkCustRow("Pressure2") = "" checkCustRow("Pressure3") = "" checkCustRow("Pressure4") = "" checkCustRow("Category") = "BOPs" checkCustRow("VSSName") = "BOPs.vss" checkCustRow("Type") = cmbType checkCustRow("Manufacturer") = "WFT" checkCustRow("Height") = cmbHeight checkCustRow("Width") = cmbWidth checkCustRow("Weight") = cmbWeight checkCustRow("VolumeOpen") = cmbOpen checkCustRow("VolumeClosed") = cmbClosed checkCustRow("EndConnection") = "" checkCustRow("Userdefined") = "T" PcDatabase1.Tables("MainToolData").Rows.Add(checkCustRow) Dim ta As New PCDatabaseTableAdapters.MainToolDataTableAdapter ta.Update(PcDatabase1.MainToolData) Any suggestions? Jeff
View Replies !
Refresh A Report On Page Load??(Reporting Services 2000, Visual Studio 2003)
Hi, I'm still quite a beginner with the Report Designer and now I have faced a problem. My goal is to make a reports refresh each time it is loaded. I know that this can be done by using rs:clearsession = true-method but in order this to work, it should be added to each link. There are a lots of links in the reports we are using and therefore it would be more practical to find another way to refresh the report on page load. Is there any way to do this with some kind of code attached to each report? I'm using Visual Studio 2003 and my Reporting services 2000.
View Replies !
Debugging SQL Server 2005 Stored Proc With Visual Studio 2005
Hello, we have a SQL server 2005 with Visual studio Prof. 2005 in the employment. The debuggers function only in Visual studio correctly, as long as no code on the SQL server must be implemented. If a BREAK POINT in a Stored Procedure is set, this is not activated, since this cannot be bound. Does someone know, what it lies and can like one it eliminate? Thank you for your assistance in advance. Yours sincerely Big_Ben_31 This entry was translated automatically with the translation service babel.altavista.com from the German into English.
View Replies !
Installing MS Visual Studio 2005 (PE). On Vista X64 (BE) Running MS SQL Server 2005 (DE) X64
Hi, I am running SQL Server 2005 x64 DE on Vista x64. I installed MS VS 2005 Pro. Edition. During the setup of VS, I did a custom install, un-checking the SQL Express addition box. After installation, I received errors that indicated the SQL Express did not install. Even though I do not have SQL Express installed on my machine, MS Update says that I need SQL Express SP2. My SQL DE is up to date with SP2 and MS Update indicates as "optional" that I need SQL SP2. Is SQL Express a necessity for VS Pro? If not, why is MS Update indicating that I need SQL Express SP2? In addition, why is MS Update telling me I need SQL SP2 when it is already installed? Note: I installed SQL SP2 manually, not through MS Update. This makes me believe that MS Update is not detecting it. Thanks in advance to anyone who can help, Abel
View Replies !
Native Oracle SQL -&&> SQL Server 2005 CE .sdf File -&&> Using Visual Studio 2005?
I've got a table adapter that connects using an oracle data connector. In the adapter, I'm using native oracle SQL such as: select TO_DATE(SUBSTR(TO_CHAR(weird_oracle_field),0,12),'YYYYMMDDHH24MI') as dt_added from oracle_data_table There's also a CASE statement in there with some other data transformations. Anyway, I want to take the results of that Oracle query and put the dataset into a SQL Server Compact Edition database - within an application that I'm creating in Visual Studio 2005. For whatever reason, I can't seem to do anything like that in 'bulk' and there aren't any data migration tools that work with anything other than "full" SQL Server versions. My client doesn't support SQL Server, but I can deploy my app with SQL CE. I need a 'local' copy of the database (for several reasons) and just can't seem to figure out how to make this work. I'm really going nuts. I feel like I'm soooo close when I see the data I want in the table adapter - but I can't seem to actually *move* the data over!! Can anyone help? thanks, Jon
View Replies !
Visual Studio 2005 Unable To Connect To SQL Server Express 2005
Hi, I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message, " Required Component Missing (Dialog box heading) Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251 " I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped. I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed. Thanks, CLN P.S. I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
View Replies !
How To Slipstream Sql Server 2005 Express SP1 Into Visual Studio 2005 Setup?
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1? I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it... There's another file under that folder named sqlexpr32.exe I am wondering what it's for? Thanks in advance.
View Replies !
How To Slipstream Sql Server 2005 Express SP1 Into Visual Studio 2005 Setup?
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1? I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it... There's another file under that folder named sqlexpr32.exe I am wondering what it's for? Thanks in advance.
View Replies !
Unable To Debug SQL Server 2005 Stored Procedures From Another Workstation Running Visual Studio 2005
I'm having some problems debugging SQL Server stored procedures on a SQL Server 2005 server. I have installed Visual Studio 2005 on a workstation running Windows XP, now I'm trying to debug a ASP.Net web application that has some code that executes the stored procedures on a Windows 2003 Server running SQL Server 2005. I opened VS2005 ... created a connection to the SQL Server 2005 instance ... open the Stored procedure ... right click the stored procedure name and selected Step into Stored Procedure and the following message is displayed: Unable to start T-SQL debugging.Could not attach to SQL Server process on 'ServerName'. Any ideas. Thanks,
View Replies !
SQL Server 2005 Service Pack 2 Has Not Upgraded Visual Studio 2005 Business Intelligence Tools
Hi, I understand from previous threads that installing SQL Server 2005 Service Pack 2 on the desktop client can speed up the response rate of the Visual Studio 2005 Business Intelligence Tools. However after logging on as an administrator and installing Service Pack 2, Service Pack 2 returned no errors. However after launching Visual Studio and clicking on the about dialog box the version reported was still €œRTM.050727-4200€? where I was expecting to see €œSP.050727-7600€?. I understood that I applied the same service pack to my copy of SQL Server on my laptop and the upgrade worked successfully. Can anyone help? Thanks in advance, Kieran.
View Replies !
SQLCe Errors When Doing Developing A SQL Mobile Application With Visual Studio 2005 And SQL Server 2005 Tutorial
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005. When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors. ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error. "Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect. Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems. I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial. I am trying to run this sync on my home pc so there should be no issues with any user permissions I have IIS installed I did NOT have SQL Server Agent running in management studio at this time I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem. AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters int returnValue = this.Adapter.Fill(dataTable); I am not sure why the errors changed on me after starting SQL Server Agent. What can I do to fix this connection problem? Thank you so much for your help! Irina
View Replies !
SQL Server 2005 Express Connectivity With Visual Studio.NET 2005
Hello I'm having a problem with the server connection and my C# code. The code executes alright but no data is entered into the database behind it. I'm pasting the connection code over here as well. The sql commands are used in the code. I think I used the sql server mobile edition which is installed along with visual studio.net 2005. Anyone know what's wrong, and can help me out? Thanks in advance.public static void storeInDb(string trackName, string artist, string albumTitle, string year, string path, uint[] fp) { string connStr="Data Source=.\SQLEXPRESS;AttachDbFilename='"+path+"\Data\ACI.mdf';Integrated Security=True;User Instance=True";SqlConnection conn = new SqlConnection(connStr); conn.Open();string sql = "INSERT INTO Clip(Song, Artist, Album, Year) VALUES('" + trackName;sql = sql + "','" + artist + "','" + albumTitle + "','" + year + "')"; SqlCommand cmd = new SqlCommand(sql, conn); cmd.ExecuteNonQuery(); sql="SELECT max(ClipID) FROM Clip"; cmd = new SqlCommand(sql, conn);int id = Int32.Parse(cmd.ExecuteScalar().ToString());for (int i = 0; i < fp.Length; i++) { sql="INSERT INTO Hash VALUES ("+id+","+(i+1)+","+(int)fp[i]+")";cmd = new SqlCommand(sql, conn); cmd.ExecuteNonQuery(); } conn.Close(); }
View Replies !
SQL Server 2005 Express And Visual Studio 2005 Standard
Hi everyone,I am trying to connect to SQL Server 2005 Express with Advanced Services from Visual Studio 2005 Standard Edition. I have SQL Server 2005 Standard Edition but it took up so much space and resources on my computer that I didn't want to put it back on there. So I put the SQL Express on there and while the Management Studio application connects just fine, VS 2005 will not. Oddly enough, VS 2005 connected just fine to SQL 2005 Standard. I have enabled shared memory, named pipes and TCP/IP. I have set up SQL Express to accept remote connections on named pipes and TCP/IP. And I have tried running SQL Express as the Local System Account, as a Local Service and as a Network Service. Nothing. I have tried feeding the Server Name is the Data Connections dialog in Visual Studio my SQL Express instance as (local)/SQLEXPRESS, localhost/SQLEXPRESS, and {computername}/SQLEXPRESS where {computername} is the name of my local computer which SQL Express is (allegedly) running on. And I cannot get the list of databases on that server.There is probably something very simple that I have left out. Can anyone see what it is?Thanks!
View Replies !
Connecting SQL Server 2005 Dev Edition To Visual Studio 2005
ok so i have set up SQL server 2005 on a Windows server 2003 machine. I am trying to connect to it via ODBC and/or Visual Studio 2005 on a computer running off the same switch. I have set SQL server to accept remote connections and named pipes as well as had the port unblocked. when i try and connect to it via Vista ODBC wizard or visual studio wizard it says that the server is not there or access is denied. The server is set up for SQL authentication and i am 100% pos that the username/password i am using is correct. i am at a total loss as to what to do to get my vista machine to talk to that SQL server.
View Replies !
|
TRACKER
