Data Access :: Recordset Returned By Query Have A Status Of Closed?

Oct 8, 2015

I'm running the following SQL query from LabVIEW, a graphical programming language, using the built in capabilities it has for database connectivity:

    DECLARE @currentID int
    SET @currentID = (SELECT MIN(ExperimentID) FROM Jobs_t WHERE JobStatus = 'ToRun');
    UPDATE [dbo].[Jobs_t]
    SET [JobStatus] = 'Pending'
    WHERE ExperimentID = @currentID;
    SELECT @currentID AS result
<main.img>

This is the analogous code to main() is a C-like language. The first block, which has the "Connection Information" wire going into it, opens a .udl file and creates an ADO.NET _Connection reference, which is later used to invoke methods for the query.

<execute query.img>

This is the inside of the second block, the one with "EXE" and the pink wire going into it. The boxes with the gray border operate much like "switch" statements. The wire going into the "?" terminal on these boxes determines which case gets executed. The yellow boxes with white rectangels dropping down are invoke nodes and property nodes; they accept a reference to an object and allow you to invoke methods and read/write properties of that object. You can see the _Recordset object here as well. <fetch recordset.img>

Here's the next block to be executed, the one whose icon reads "FETCH ALL". We see that the first thing to execute on the far left grabs some properties of the recordset, and returns them in a "struct" (the pink wire that goes into the box that reads "state"). This is where the code fails. The recordset opened in the previous VI (virtual instrument) has a status of "closed", and the purple variant (seen under "Read all the data available") comes back empty.

The rest of the code is fairly irrelevant, as it's just converting the received variant into usable data, and freeing the recordset reference opened previously. My question is, why would the status from the query of the recordset be "closed"? I realize that recordsets are "closed" when the query returns no rows, but executing that query in SSMS returns good data. Also, executing the LabVIEW code does the UPDATE in the query, so I know that's not broken either.

View 3 Replies


ADVERTISEMENT

Data Conversion Failed. The Data Conversion For Column Value Returned Status Value 4 And Status Text Text Was Truncated Or On

Jan 7, 2008

Hi Experts,

I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".

The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.

If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.

I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.

Can anyone suggest how to solve this issue.

View 11 Replies View Related

DTS Error ? No Query Specification Returned By Transform Status

Mar 3, 2004

I'm getting this error in a simple DTS package.

No query specification returned by transform status.

Any ideas what's causing this ?

DTS is simply running a query (which returns data via preview)
and insert results into a table.

Thanks
Mark

View 1 Replies View Related

The Data Provider Or Other Service Returned An E_FAIL Status!?!?! WT-???

Oct 24, 2006

I'm running sql server ver 7.0 SP4.I have an access project (.adp) that runs a view which is nothing morethan a select statement. Access locks up solid when I try to run thisquery - with NO error messages what-so-ever.If I sign onto the server, and run the view from enterprise manager - Iget:"the data provider or other service returned an E_FAIL status" !?!?!There is NO ERROR number, or further explanation of the message!!Now - this query DID work last week - all of a sudden I get this error- I've:1) repaired / compacted this database2) rebooted the server3) spent several hours searching websites & groups for an explanationa) I don't care how useless some people think enterprise manager is -at least it gave me SOME kind of error; where access just locks up!b) There are no issues with null values, or problem date fieldsanywhere in these tables.4) tried MANY variations on the query, and am now more confused thanever.5) I've RUN THIS QUERY IN AN ACCESS MDB WITH LINKS TO THE SQL SERVER -AND IT WORKS!?!?!?!?The query I'm using follows; if I remove ONE field from the selectstatement - this query RUNS!!!It doesn't matter what field I remove! It's as if, I can only have somany fields in the select statement!?!?!?This is clearly ridiculous since the query ran fine last week with thesame number of fields, not thatthat should have anything to do with this, as sql shouldn't care howmany fields I request.I'm not actually requesting any fields in the last table - but if Iremove this table it works!? If I leave this table, and select fieldsfrom it, but remove another table - again it works!So my questions:1) What [T-] is going on here?2) Why would an mdb be able to run a query that an adp can not!?!?3) When will microsoft ever release a product that provides usefulerror messages?I really don't expect an answer to #3, because I know the answer isNEVER - microsoft doesn't want to make solving problems easy.Here's the query I'm using:SELECT codes.proj_id, answers.report_date,answers.release_date, answers.notes,answers.answer_date, answers.answer_person,answers.answer, answers.answer_status,answers.answer_person2, codes.cust_idFROM dbo.codes LEFT OUTER JOINdbo.demos ONdbo.codes.code = dbo.demos.code LEFT OUTER JOINdbo.answers ON dbo.codes.code = dbo.answers.codeany help appreciated - TIABob

View 2 Replies View Related

Data Provider Or Other Service Returned An E_Fail Status In Sql Server 2005

May 15, 2007

after converting database from sql server 2000 to sql server 2005. my program on vb6 is facing runtime error. i.e.data provider or other service returned an E_Fail status .

how can i get rid this problem

View 2 Replies View Related

Data Conversion Failed From String To Numeric Returned Status Value 6 In Ssis

Sep 6, 2007

Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.

View 6 Replies View Related

SQL Server 2005 &&amp; Data Provider Or Other Service Returned An E_FAIL Status

Apr 22, 2007

Dear all,



I am running an Access adp application with SQL Server 2005 as back end database. I run a query by using Management Studio query window, and it returned correct results with some columns containing NULL value. But when I run this query through MS Access client side, popup an error "Data provider or other service returned an E_FAIL status" and crash the Access application. I moved the database back to SQL Server 2000, and it runs perfect on both client side and server side returning the correct result. This query is important for the application. Please help!!!!



Query as followed:



SELECT TOP (100) PERCENT dbo.VWINFO312FYTRStreamEnrolments.StudentID, dbo.RequiredStreams.StreamType,
dbo.VWINFO312FYTRStreams.StreamCode + CAST(dbo.VWINFO312FYTRStreams.StreamNo AS varchar) AS FullStreamCode,
dbo.DaysOfWeek.DayCode, dbo.VWINFO312FYTRClasses.StartTime, dbo.VWINFO312FYTRClasses.EndTime, dbo.VWINFO312FYTRClasses.Room,
dbo.Tutors.TutorName, dbo.Tutors.PhoneExtn, dbo.Tutors.OfficeHours, dbo.DaysOfWeek.DaySequence, dbo.RequiredStreams.StreamOrder
FROM dbo.RequiredStreams INNER JOIN
dbo.VWINFO312FYTRStreams ON dbo.RequiredStreams.PaperID = dbo.VWINFO312FYTRStreams.PaperID AND
dbo.RequiredStreams.StreamCode = dbo.VWINFO312FYTRStreams.StreamCode INNER JOIN
dbo.VWINFO312FYTRStreamEnrolments ON dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRStreamEnrolments.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRStreamEnrolments.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRStreamEnrolments.StreamNo LEFT OUTER JOIN
dbo.DaysOfWeek INNER JOIN
dbo.VWINFO312FYTRClasses ON dbo.DaysOfWeek.DayCode = dbo.VWINFO312FYTRClasses.DayofWeek ON
dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRClasses.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRClasses.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRClasses.StreamNo LEFT OUTER JOIN
dbo.Tutors ON dbo.VWINFO312FYTRClasses.ResponsibleTutor = dbo.Tutors.TutorID

View 4 Replies View Related

Data Provider Or Other Service Returned An E_Fail Status In Sql Server 2005

May 17, 2007

Main_Module.STRCNNN1 = "driver={SQL Server};server=" & Main_Module.Server_Name & ";" & _
"uid=SA;pwd=;database=" & Main_Module.Common_Database
error msg is

runtime error

data provider or other service returned an E_Fail status in sql server 2005



when i am fetching record from view using order by clause in select statement then error is coming

as

select * from vew_emp where grade='C' order empno



at the first time it fetching record with order by

but when i am using recordset.Requiry

it cud not fetch the record

i think when the recordset is open with the record of view

i am deleting ,inserting record in the view base table then the main recordset is not working

without using order by it is running and working well
plz reply me quickly

View 3 Replies View Related

ASP Sp Execution Returning Closed Recordset

Jul 20, 2005

Can anybody tell me why a) when running a stored proc from an asp page toreturn a recordset the command succeeds if the sp queries an existing tabledirectly, but b) if the stored proc populates results into a differenttable, temporary table, global temp table, or table variable, then queriesone of these, the asp page reports that the recordset object is closed. Ifusing a table, I have set grant, select, update, delete permissions for theasp page user account, so it doesn't appear to be a permissioning issue. Ifrun in Query Analyser the sp runs fine of course.Abridged asp code is as follows:StoredProc = Request.querystring("SP")oConn.ConnectionString = "Provider=SQLOLEDB etc"oConn.Openset oCmd = Server.CreateObject("ADODB.Command")oCmd.ActiveConnection = oConnoCmd.CommandText = StoredProcoCmd.CommandType = adCmdStoredProcoCmd.Parameters.Refresh'code here that populates the parameters of the oCmd object correctlySet oRs = Server.CreateObject("ADODB.Recordset")With oRS.CursorLocation = adUseClient.CursorType = adOpenStatic.LockType = adLockBatchOptimistic'execute the SP returning the result into a recordset.Open oCmdEnd With' Save data into IIS response objectResponse.ContentType = "text/xml"oRs.Save Response, adPersistXML'the line above fails with stored procs from example B below, reporting "notallowed when object is closed", but works with example ASP Example A - this one works fineCreate Proc spTestA ASSELECT ID FROM FileListGOSP Example B - this one doesn't work from ASP but runs fine in QACreate Proc spTestB ASDECLARE @Results Table (ID TinyInt)INSERT INTO @Results SELECT ID FROM FileListSELECT ID FROM @ResultsGOI can see the SP executing using profiler when the asp page is called forboth sp's above, so it doesn't appear to be a problem with the execution.It's something to do with returning the result set from the table variable.Thanks,Robin Hammond

View 1 Replies View Related

Data Returned From .WriteXML Is Different Than What Is Returned In Query Analyzer.

Jun 20, 2006

I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3.   string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE  a.RegionCode = b.RegionCode"; 5.   DataSet dsMarketList = new DataSet();6.   SqlConnection sqlConn = new SqlConnection(intranetConnStr);   7.   SqlCommand cmd = new SqlCommand(sql,sqlConn);8.  sqlConn.Open();9.   SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10.   try11.   {12.   adapter.Fill(dsMarketList);
 13.  String bling = adapter.SelectCommand.CommandText;//BRG 14.   dsMarketList.DataSetName="RegionMarket"; 15.  dsMarketList.Tables[0].TableName = "MarketList"; 16.    dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to  17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18.           // from the SQL query 19.  } 20.  catch(Exception e) 21. {  22. // Handle the exception (Code not shown)

View 2 Replies View Related

Append Recordset Returned From A Stored Procedure

May 12, 2004

I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?

Private Sub Form_Open(Cancel As Integer)
dim ...

Set add_bag_results = Nothing
With add_bag_results
.ActiveConnection = CurrentProject.Connection
.CommandType = adCmdStoredProc
.CommandText = "spSampling_add_bag_results"
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
'.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1))
.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n)
..
Set rs_add_bag_results = .Execute
End With

Me.RecordSource = rs_add_bag_results ?

Thanks!

View 2 Replies View Related

Returned Status Value 2 Error

Jan 14, 2006

Could someone please explain why I get the following errors ?

I have them in 15 out of 20 packages and its always the same, I have tried, removing the columns from the data source but it just seems to jump then to another column.

I have also tried redirecting the errors to a differnet error database but ALL the rows just seem to be errors then

In event viewer I get no further information simply

Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12291
Date:  14/01/2006
Time:  14:57:56
User:  
Computer: 
Description:
Package "Policy_PC" failed.

[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".

[Flat File Source [1]] Error: The "output column "Column 42" (176)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 42" (176)" specifies failure on error. An error occurred on the specified object of the specified component.

[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Any input at all is welcome, Im still a newbie at this

View 4 Replies View Related

Transact SQL :: Records Returned To Same Status

Jul 23, 2015

In my database I have an Audit table, that keeps track of teams worked upon the same record in a workflow.I need to find out how many records have been returned to the first team for correction ?The column 'Status' is numbered from 1 to 6 and Column 'EditTime' saves the time when record has been edited.how many records have been returned for correction and identify those records.

View 9 Replies View Related

Transact SQL :: Summarizing Data Returned By Join Query

Nov 20, 2015

I have a table (edw_sbx_bt.jjenkins_OVERAGE2) of 40,000 MA_NUM.  

I want to find occurrences of those specific MA_NUM in another table (edw_ar_fl.ARTBASE) with specific attributes (CONTRACT_NUM = '593' and TRANSACT_STATUS_CD = 'D').  

When I run the query below it returns 4 million rows.  How can I write a query that will return the 40,000 MA_NUM (in edw_sbx_bt.jjenkins_OVERAGE2) with the sum total of MA_PAID_AMT associated with each?

SELECT edw_ar_fl.ARTBASE.MA_NUM,
       edw_ar_fl.ARTBASE.MA_PAID_AMT
FROM   edw_ar_fl.ARTBASE
       JOIN edw_sbx_bt.jjenkins_OVERAGE2
         ON edw_ar_fl.ARTBASE.MA_NUM = edw_sbx_bt.jjenkins_OVERAGE2.MA_NUM
WHERE  edw_ar_fl.ARTBASE.CONTRACT_NUM = '593'
       AND edw_ar_fl.ARTBASE.TRANSACT_STATUS_CD = '

View 4 Replies View Related

Select A Subset Of Data From The Dataset Returned By A Union Query

Mar 30, 2004

hi all

Any day, another question. I love you guys.

I want to select a subset of data from a dataset returned by either another subquery or a union.

e.g. this is how i would do it in oracle, but i have no idea how this can be done in mssql or whether it's possible at all.

select * from
(
select col1, col2, col3 from table1
union
select col1, col2, col3 from table 2
)
where col1 = 'blah'

in essence oracle treats the data returned by the subquery as a table that it would select from.


how would i do the same in mssql?

thank you


James :)

View 5 Replies View Related

Can No Longer Access Report Manager - The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive.

Apr 11, 2008



Hi,

For a long time I've had SQL Server 2000 with RS on a Server2003 machine.
When I want to publish a report from my Dev box, I remove anon. access on the Production machine, deploy the report, then go into report manager to tweak a couple of parameters. I then re-enable anon. access so users can continue.


Yesterday, I removed anon. access and deployed the report but when I went into Report Manager I received the above error message... "The underlying connection was closed: An unexpected error occurred on a receive."


I can get into report manager with anonymous access enabled, but I don't have authority to do anything.


What's happened!!!? More importantly, how do I fix it?

View 8 Replies View Related

SQL Query: Select All The Points Within A Closed Polygon

Feb 18, 2005

HI:

Is there any algorithim, which can help me write a script or SQL that will select all the points within a Closed Polygon.

This polygon and point data have latitude and longitude information

Help will be appreciated.

Thanks
Namita

View 12 Replies View Related

OLEDB Errors Using MS Access And Disconnected Recordset

Mar 31, 2004

Hello, Code below returns the following error:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done

<%
Const adLockBatchOptimistic = 4
Const adUseClient = 3

strDataBase = "somedb.mdb"

set cnTraining = server.CreateObject("ADODB.Connection")

cnnstr="Provider=Microsoft.Jet.OLEDB.4.0;User ID=Admin;Data Source=" & server.mappath(strDataBase) & ";Persist Security Info=False"

cnTraining.Mode = 3
cnTraining.Open cnnstr

set rsSearch = Server.CreateObject("ADODB.Recordset")
rsSearch.CursorLocation = adUseClient
rsSearch.LockType = adLockBatchOptimistic

sSql = "some sql stmt" 'this works fine on its own

rsSearch.Open sSql, cnTraining

set rsSearch.ActiveConnection = nothing

cnTraining.Close
set cnTraining = nothing

%>

My goal is to get a disconnected recordset. The problem here occurs when i try to use the adUseClient value (3) for the CursorLocation. If I don't use a 3 in the CursorLocation it works fine. Hoewever i'm almost certain i have to use the 3 in order to disconnect the recordset. Any ideas? Is my connection string not set up properly to get a disconnected recordset?

View 2 Replies View Related

SSIS Recordset Access Via Script Task

Jul 18, 2007

Hi,



I have found that populating a data table from an SSIS variable (recordset) within a script task works fine first time round but produces no results subsequently:






Code Snippet

Public Class ScriptMain



Public Sub Main()



Dim ad As New OleDb.OleDbDataAdapter



Dim dt1 As New DataTable
ad.Fill(dt1, ReadVariable("myRecordset"))

'below returns count of 5500
System.Windows.Forms.MessageBox.Show("dt1 Count: " + dt1.Rows.Count.ToString)


Dim dt2 As New DataTable
ad.Fill(dt2, ReadVariable("myRecordset"))

'below returns count of 0
System.Windows.Forms.MessageBox.Show("dt2 Count: " + dt2.Rows.Count.ToString)

Dts.TaskResult = Dts.Results.Success



End Sub






Code Snippet

Private Function ReadVariable(ByVal varName As String) As Object

Dim result As Object

Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)

Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try

Catch ex As Exception
Throw ex
End Try

Return result

End Function





Anybody got any ideas?



Phil.

View 8 Replies View Related

How To Access By Code Table Returned By SqlDataSource1 ???

Jun 5, 2008

Hi to all,
I'm writting code that needs to pass data returned by a SqlDataSource object to another object (user control to graph data)
Query in SqlDataSource object is OK, I've seen data returned by it at a GridView Object but I need to pass that data to an user control that needs a reference to the table that has the data
... What would be the code that do that task ??
 I'm new to develop web applications... using Visual Web Developer Express 2008
Help in advance

View 1 Replies View Related

Data Access :: Query On View To Get A Single Batched Data

Nov 25, 2015

I have a view that  give me the data of all the batched. Now I am using a query on view to get a single batched data. when I am using direct query it was taking 0 sec but when I am using Through view "select *  from myView where batched=2" then its taking 30 mnt.

View 3 Replies View Related

Data Conversion From String To Decimal When Saving Data To SQL Server 2005 Using An ADO Recordset

Feb 12, 2008

Hello,

I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.

This is the code I€™m using (C++):

CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;

"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".

The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.

I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.

So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?

Thank you for your help.

Regards,
Volker

View 2 Replies View Related

HTTP Status 401: Access Denied Error In Report Manager

Jun 15, 2007

This didn't use to happen but now it does.



When I go into Report Manager, http://localhost/reports, and try running a report it is giving me this error message:



The request failed with HTTP status 401: Access Denied



But if I go directly to the Report Server, http://localhost/reportserver, and try running a report there then everything is fine.



Does anyone know why it is doing this all of a sudden? I did change the Reports app in ISS to allow anonymous access but have since changed it back, and it still gives this error.

View 4 Replies View Related

Query With Recordset

Jun 22, 2004

Hello,

I am connecting to the database as following:
set con = server.createobject("adodb.connection")
con.open "connectionstring"
set rs = con.execute("select * from tablename")

I am able to display the records but if I want to give adopenstatic to the above connection, how can I do so?

Thanks in advance,
Uday.

View 1 Replies View Related

Use A Whole Recordset For A 'LIKE' Query (was Quickie)

Jan 16, 2007

trying to search a DB for all records within a range.
I have a recordset containing about 10 postcodes and I need to find all the records containing any one of those postcodes
currently I have:
sqlString= "SELECT aucTitle FROM tblAPAuctions WHERE aucPostalCode LIKE '%" & left(rsPostcodeResult, 4) & "%'"
but I am getting 'type mismatch' error.

Thanks for looking
Mark

View 11 Replies View Related

SQL Server 2012 :: Geography Data Type - Test If Point Is Inside A Closed Polygon

Dec 5, 2013

I have a closed polygon that coincidently is in the shape of Iowa :) I have a point that is within the state and a point WELL outside it, but I get weird results that I don't expect when I try to get it to tell me that the point is within the polygon. Here is some basic code, with long coordinates data.

DECLARE @g geography,
@pIn geography,
@pOut geography

SET @g = geography::STPolyFromText('POLYGON((-91.119987 40.705402, -91.129158 40.682148, -91.162498 40.656311, -91.214912 40.643818, -91.262062 40.639545, -91.375610 40.603439, -91.411118 40.572971, -91.412872 40.547993, -91.382103 40.528496, -91.374794 40.503654, -91.385399 40.447250, -91.372757 40.402988, -91.385757 40.392361, -91.418816 40.386875, -91.448593 40.371902, -91.476883 40.390968, -91.490158 40.390762, -91.500221

[code]...

(1 row(s) affected)As I read that there is a distance of about 7864 meters, this is close to what I would expect, so that's ok. The point outside I would expect a distance as well so that is confusing.. Then we have the intersects, it says that the point inside does NOT intersect but the one outside DOES, this is backed up by the intersection values.

View 1 Replies View Related

SQL 2012 :: Report GUEST User Access Status In All Databases On Instance Level

Apr 17, 2015

Below query tells us if guest user is enabled or disabled in a particular database

SELECT dp.name, CASE perms.class WHEN 0 THEN 'Yes' ELSE 'No' END AS 'Enabled'
FROM sys.database_principals dp
LEFT JOIN (SELECT grantee_principal_id, class FROM sys.database_permissions
WHERE class = 0 AND type = 'CO' AND state = 'G') AS perms
ON dp.principal_id = perms.grantee_principal_id
WHERE dp.name = 'guest';

Do we have a query which can also add the database name to above query output? The output must have columns with data against Name,Enabled,Database name

View 1 Replies View Related

Cursor, Query, View And Recordset

Jul 20, 2005

Could someone help me by answering the questions below?What's a cursor?What's difference between Query and View?Is a RecordSet just part of a table? Can it be part of a query of view?If the content in a table changed, is it necessary for a old recordset torenew itself by do "Requery()"?Thanks for your help!

View 4 Replies View Related

An Error Occurred While Receiving Data: '10054(An Existing Connection Was Forcibly Closed By The Remote Host.)'.

Jan 3, 2006

What does this error mean? I get this in the transmission_status column of  sys.transmission_queue

An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.

Also, does the number in this message correspond to error 10053 in sys.messages?

Thanks

 

 

 

View 3 Replies View Related

Access Data Via Query Analyzer

Aug 27, 2003

Is it possible to attach Query Analyzer to an Access database to query data (how?) or must one upsize the MDB into a SQL database for querying?

Thanks,

Al

View 2 Replies View Related

Data Access :: Automating A Query

Jun 2, 2015

I have a sql query that I would like to run every morning and output into a csv file.Unfortunately, I can't seem to find simple instructions on how to use SQL Server Agent to run that.

View 4 Replies View Related

Recordset From Two Data Sources

Mar 7, 2002

Is it possible to create a recordset from two different datasources?

Such as
SELECT * FROM DataSource1.TableName WHERE ColumnName IN (SELECT Column FROM Datasource2.TableName)

Thanks.

View 1 Replies View Related

Recordset From Two Data Sources

Mar 7, 2002

Is it possible to create a recordset from two different datasources?

Such as
SELECT * FROM DataSource1.TableName WHERE ColumnName IN (SELECT Column FROM Datasource2.TableName)

Thanks.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved