Database Engine Not Displayed By Management Console
I have sql server 2005 express installed on an XP machine. When I browse for a database engine, SQL server 2005 management console displays machinenamesqlexpress in the local tab, BUT in the network tab only the machinename is displayed. Thus, I cannot connect to express from a networked machine.
Any help would be appreciated.
TIA,
Joe
View Complete Forum Thread with Replies
Related Forum Messages:
HELP! Unable To Select Database Engine In Management Studio
Hi All, I am new to SQL Server and having trouble using SQL Server Management Studio. I am unable to select the Database Engine in management studio. I am able to see the instance of default database engine (MSSQLServer) running in Reporting Services manager as well as in Surface area configuration manager, but it is not visible in the drop down list in Management Studio's "Select Database Engine" menu. I had removed Sql server 2005 earlier ( I was able to select the database engine in Management Studio then). But when I installed it again, I was unable to install the Sql Server Tools (it said that my Upgrade is blocked). So, I cleaned the Windows Registry of all keys containing 'Sql'. After this I tried installing it again and successfully installed Sql Server 2005 + ALL TOOLS. But this time I am unable to select the database engine in management studio. Thanks and Regards to ALL
View Replies !
New SSB-Management Console
Hi, we are currently planning the development of a new SSB-Admin-Tool for SOA environments, which will allow dynamic configuration during MSBuild, register and monitor all services, dynamically configure routes (supporting gateway-servers and services registered on multiple servers for fail-safe). I would like to know if MS is currently working on something similar (the Service-Listing-Manager is buggy, old and seems to be dead on GDN) and what the community thinks.
View Replies !
Server Management Console Only??
Can the Server Management Studio Express be installed on a machine without SQL Server Express? I have a machine that I use daily that I need to access a remote instance but there is not a need (or space) to fully install SQL Server onto the local machine - all I need is the management tool. I tried installing it but the process errors out, saying a pre-requisite (MSXML6) isn't found. It refers me to a site with all the different SQL Server downloads. All I need is the management tool on this machine. Is there a way to do it? Tried loading "MOM" but it doesn't show up either Thanks Paul P
View Replies !
SQL Express And Management Console Ctp Issue
So i installed sql express and the management console and have the sql service and browser running. I try to connect to my instance of sql express with the management console and it says it doenst allow remote connections. error: http://img95.imageshack.us/my.php?image=error28to.jpg What do i need to do to be able to use the management console? I was able to connect before but due to some bad advice think i stuffed up the whole thing and had to uninstall sql express and the management console. I re-installed them both but am now getting this error. what the heck is the deal with this? It shouldnt be this hard! This is in relation to an earlier issue i had trying to get to connect to a database from within visual web developer express and now i can connect to my sql express instance but cant get into the managment studio. :(
View Replies !
Connection Issue With Management Console
When i try to connect to Integration Services on a SQL 2005 Machine, it Gives me a Class not registeed. But i can connect to SQL 2008 Integration Services without a issue. I tried Restarting the 2008 machine and Also Reinstalling the SSIS Piece and also Reinstalled SQL 2008, but nothing seems to Help.
View Replies !
SQL Server 2005 Management Console
We installed SQL Server 2005 x64 on a server for our client here at our office. We can't connect to it using Enterprise Manager. I'm assuming we need to install the management console because of the differences in 2000 and 2005. The install is for a x64 and our workstations are x32. Do I need to get a media kit for a x32 because the x64 install won't work. Where can I get the install for the x32 Management console and will this work?
View Replies !
Microsoft Management Console Nice Update!
Hi, There is a tool you can install it to change the behavior of the Management Console, when you double-click on a table it will fire the Return All Rows command instead of the Properties command. I already saw this change but could not know where to get it from, any one of you know it? Thanks,
View Replies !
Management Console In Enterprise Manager Error
hi, I always get DR Watson fir Window NT when I test Operators under the Management console. I have created a new operators and when I go to the property to test the email and the pager notification, I get Dr Watson and Sql Server Enterprise disappear. I am not sure what is going on and if there is someone knows what is going on,please let me know thanks for your help Ahmed
View Replies !
SQL Server Management Console Express And Linked S
Ok so I managed finally to get an Excel Spreadsheet to connect as a linked server. When I right click it , go to run scripts and click on create to i can see the tab of script below: /****** Object: LinkedServer [EXCELLINK] Script Date: 05/17/2008 08:37:04 ******/ EXEC master.dbo.sp_addlinkedserver @server = N'EXCELLINK', @srvproduct=N'Excel', @provider=N'Microsoft.Jet.OLEDB.4.0', @datasrc=N'c:PRICINGFINAL2.xls', @provstr=N'Excel 8.0' /* For security reasons the linked server remote logins password is changed with ######## */ EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'EXCELLINK',@useself=N'False',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'collation compatible', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'data access', @optvalue=N'true' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'dist', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'pub', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'rpc', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'rpc out', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'sub', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'connect timeout', @optvalue=N'0' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'collation name', @optvalue=null GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'lazy schema validation', @optvalue=N'false' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'query timeout', @optvalue=N'0' GO EXEC master.dbo.sp_serveroption @server=N'EXCELLINK', @optname=N'use remote collation', @optvalue=N'true' Now I am not sure exactly how to go about querying to pull the data into a table. The table I want to set will have three columns: CREATE TABLE new_price ( item_id CHAR(12), item_lst_lnd_cost DECIMAL(9,2), item_prc_2 DECIMAL(9,2)) the columns in the EXCELLINK linked server spreasdsheet are named the same as the columns above. Once the table is created how do I use the linked server to import the data? Brooks C. Davis IT AdministratorLogistics Manager SFTF LLC dba Ashley Furniture Homestores DELL POWEREDGE 2850 Dual Core Xeon x3 = 1xDB 1xSQL 1xTS | DELL POWEREDGE 2950 Quad Core Xeon = 1xTS | SERVER 2003 | MS SQL 2005 | PERVASIVE EMBEDDED V.9
View Replies !
Microsoft Management Console Snap-In Failed To Initialize
Uninstalled an older version of SQL and installed SQL Express 2005 In Computer Management Dialog box, when you click on Services and Applications, you the following error dialog box: Microsoft Management Console Snap-In Failed to initialize Name: Microsoft SQL Enterprise Manager CLSID{xxxx€¦xxx} (where x is the actual CLSID) Microsoft SQL Enterprise Manager was uninstalled. How do I get rid of this dialog box? Everything is working fine. Thanks Bob
View Replies !
SQL Server Management Studio Can't 'see' The 2005 Engine?? But Can See 2000 ?!?
Hello,I had SQL2000 server running fine on the windows 2003 box. I then installedSQL 2005 Express. They both worked together fine. I then uninstalled SQL2005 Express and installed SQL 2005 Server. But when I open SQL ServerManagement Studio, I can only connect to the SQL 2000 engine. In the Objectexplorer, it says v8.0.2039 (which I think is SQL 2000 Server, because I cansee the existing SQL 2000 databases).How can I get SQL Server Management Studio to 'see' the SQL 2005 databaseengine so I can create tables? I *think* its running because there is the'sqlservr.exe' process running, and during installation there is no issues.When I open SQL Server Management Studio, I choose 'Database Engine', thenmy local Servername with Windows Authentication. How do I connect to the SQL2005 instance?Thanks,Jack.
View Replies !
My SQL CLR UDTs Are Not Displayed Correctly In The Database, Or Are They?
Hi, I'm new to SQL CLR programming and have recently implemented a few simple test UDTs. Typically I provide a property called Value and, if applicable, a method to display that value in a different format. For example, I havea UDT representing Australian states: the Value property returns the acronym (e.g. VIC) and the ProperName() method returns the full name (e.g. Victoria). However, when I do a regular query, say SELECT * FROM Customers, the values in the column in which I am using the UDT are displayed as hex (I believe), for example '0x008064'. Is this behaviour the result of a faulty implementation on my part or is it just the way SQL Server displays a non-native data type? Here's the essential implementation code: [Serializable] [SqlUserDefinedType(Format.UserDefined, IsByteOrdered = true, MaxByteSize = 58, IsFixedLength = false)] public struct udt_au_stateId : INullable, IBinarySerialize { private bool _isNull; private AU_StateId _state; private enum AU_StateId { ACT, NSW, NT, QLD, SA, TAS, VIC, WA } public void Read(BinaryReader r) { SetStateId(r.ReadString()); } public void Write(BinaryWriter w) { w.Write(_state.ToString()); } public SqlString Value { get { return _state.ToString(); } set { if (!SetStateId(value.ToString())) throw new ArgumentException("'" + value.ToString() + "'" + " is not a valid Australian state or territory."); } } public SqlString ProperName() { return GetProperName(); } public override string ToString() { if (_isNull) return "<NULL>"; else return _state.ToString(); } public bool IsNull { get { return _isNull; } } public static udt_au_stateId Null { get { udt_au_stateId u = new udt_au_stateId(); u._isNull = true; return u; } } public static udt_au_stateId Parse(SqlString s) { if (s.IsNull) return Null; else { udt_au_stateId u = new udt_au_stateId(); u.Value = s; return u; } } /* some implementation details omitted */ Best regards, Ieyasu
View Replies !
ODBC Data Source - Database Not Displayed
I'm rather new to SQL Server 2005 and having some difficulty accessing a newly created database through access. I can create the database and tables fine in SQL Server Management Studio, but when I try to add a ODBC data source, the only databases that appear in the 'default database' list are the system databases (i.e. master, model, msdb, tempdb). What do I need to do to get my database to appear in the list?
View Replies !
Iam Trying To Backup My Database But Nothing Is Backedup And No Error Message Is Displayed. Here Is My Code.
Iam trying to backup my database but nothing is backedup and no error message is displayed. Here is my code. <%@ Page Language="VB" %> <%@ Import Namespace="System.Data.SqlClient" %> <%@ Import Namespace="System.Data" %> <%@ Import Namespace="System.Net.Mail" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server"> Protected Sub LinkButton1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Try Dim con As SqlConnection con = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|safetydata.mdf;Integrated Security=True;User Instance=True") Dim com As New SqlCommand("BACKUP DATABASE safetydata TO c:ackuptest") com.Connection = con com.Connection.Open() com.ExecuteNonQuery() com.Connection.Close() Response.Redirect("DeveloperBackup_success.aspx") Catch ex As Exception Response.Redirect("~Developerackup_error.aspx") End Try End Sub </script> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>BackUP Page</title>
View Replies !
How Can We Modify The Files Path For The Database In Database Engine?
Hi, all experts here, Thank you very much for your kind attention. I am trying to modify the files path (primary file, log file) of databases, but it looks like I am not able to mofidy their files path directly from the database property dialogue? Would please any experts here give me some ideas on what else can I try to figure it out? Thanks a lot in advance and I am looking forward to hearing from you shortly. With best regards, Yours sincerely,
View Replies !
The Microsoft Jet Database Engine Cannot Open MS-Access Database
I have MS-Access as data source for one of the reports. I can preview the report fine from BI studio however, it does not work when I deploy it on report server. The error is : An error has occurred during report processing. Cannot create a connection to data source '<data source name>'. The Microsoft Jet database engine cannot open the file '<UNC location of the MS-Access database>'. It is already opened exclusively by another user, or you need permission to view its data. MS-Access database is located on a different server. Any help to solve this? I understand it has something to do with permission both on server where reporting service is running as well as the server where MS-access database is located. Pls help.
View Replies !
Database Search Engine
Hi folks, Whts up........??? M back, after a long gap. I have come across with a major issue. And u know wht th issue is.........??? It is about th DATABASE SEARCH TOOL. I have a database of around 30 tables. Now I wud like to have aa search engine on my .asp page. There will be a text box on th page and one submit button. After typing some text in th text area n submitting th page, my package sud check tht perticular text in all th COLUMNS of all th TABLES, n whrevr it gets a match (exactly same, or by speech recognition), it sud through th links on th next page. Nw i wud like u guys to take this problem, at th earliest n come up with a up to th mark solution. Thnkx
View Replies !
Cannot Connect To Database Engine
Hi, I've just installed a brand new instance of SQL on a new server. It's for our Helpdesk/Inventory software. All I needed to install was the DB Components and the Tools (primarily for Management Studio). I did not install SQL as a default instance, but called it TRACKIT8 (software using this instance). I have subsequently installs SP2 before trying to connect to the DB. I am unable to conect to the DB Engine via Management Studio. In the Server name: field, there is a blank space, so I try to browse for a server, but I get nothing. I try to manually type the name of the server (NIASSQL2, localhost etc) into the field, but I cannot connect to the engine at all. I can see the services for the Server and Server Agent have started in the SQL Server Configuration Manager and I am able to change certain field in the properties of the Server and Agent (change the path of the error logs). Is there something I am supposed to configure before I try to connect via the Management Studio? I am looking to change the paths of the Data Files, as I don't want them on my C: partition. Plus I have other instances I want to create and install. Any help would be greatly appreciated. Cheers.
View Replies !
Sp2 Failed For Database Engine
SP2 failed for database engine. Following is the error: EventType : sqlsesetup P1 : do_sqlgroupmember P2 : 0x7348 P3 : do_sqlgroupmember P4 : 0x7348 P5 : sqlca_sqlsecurityca.cpp@1132 P6 : unknown P7 : sql9 P8 : hotfix@ P9 : x86 P10 : 3042 Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29512 Error Description : MSP Error: 29512 SQL Server Setup was unable add user NT AUTHORITYSYSTEM to local group DCCIBERSQLServer2005SQLAgentUser$DCSQL01$MSSQLSERVER. any help appreciated...
View Replies !
Cannot Connect To Database Engine
Hi! I have a little problem and I need your help. I have recently installed SQL Server 2005 Developer Edition. I did not install all the features, just the Database engine and Analysis Services. I also updated everything with SQL Server SP2. So far, so good. But when I tried to connect to the Database Engine, I get a little window with the following message: "Cannot connect to Valentin-PC (server name)." "Login failed for user - User Name - ( Microsoft SQL Server, Error: 18456 )". I have tried just about everything, but to no avail. What is strange is the fact that I can connect to the other server type that I have installed (Analysis Services). No connection problems there. Can anyone help? Mucho gracias!
View Replies !
Deleting A Database Engine
I have recently installed SQL server 2005 express edition along with Sql server management studio expressI have run the installation twice and during the installation I have created two instances of SQL server one named instance having Windows authentication and the other default instance having mixed mode authentication. Now I want to delete the named instance. Could anybody tellme I can delete the named instance?
View Replies !
Can't Connect The Database Engine
I just installed SQL server Enterprise 2005 and connected database engine in SQL server management studio, but it is blank space when choose 'browse for more' at server name field. What's reason to cause this problem? Questions for this problem: 1. Do I need to open the TCP port 1433 in firewall by hand for connect database engine? 2. I can€™t find the sqlbrowser.exe in SQL server/90/ folder, can I copy this file into it. 3. The SQL server mobile is work; I can connect the new created database. What€™s different to use SQL server mobile and database engine? 4. I got five discs from Microsoft; I have installed DVD server application and pack 2. Do I need to install the library? Thanks for any help.
View Replies !
I Cannot Connect To The Database Engine ...
I can connect to Analysis Service and Integration Service but I can not connect to the Database Engine. I receive the following error message: Cannot connect to homebase. Additional Information: An error has occurred whlie establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server doesn not allow remote connections. (provider: SQL Network Interfaces, error: 25 - COnnection string is not valid)(Microsoft SQL Server, Error:87) (Click on OK to continue)
View Replies !
Connecting To SQL DATABASE ENGINE
hello everybody!!! I am very new to SQL SERVER 2005 EXPRESS EDITION while connecting to DATABASE ENGINE i got this error message..... An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) any solution please??????????
View Replies !
The Best Way To Use The Database Engine Tuning Advisor
Hello all,I want to use the SQL Server 2005 Tuning Advisor on our database, andI'm hoping someone here can just confirm the steps for me. We have a10GB database that has a number of applications hitting it constantly,all performing many SELECTs, INSERTs and UPDATEs. Are the followingthe steps I need to take?1. Stop all the applications hitting the database.2. Make a backup of the database.3. Start the profiler on the original database.4. Turn on all the applications again.5. Wait for a time before turning off the profiler and saving theprofile.6. Run the tuning wizard against the backup database using the savedprofile.Do I have to do this every time or am I missing something obvious? I'munder the impression I need the backup because our database has a highvolume of INSERTs and UPDATEs so I have to make sure the state of thedatabase matches the state of the profile.As a matter of interest, why is it not possible for the tuning wizardto analyse the database using the *current* activity? Why does it haveto be a 'pre-recorded' workload?Many thanks,Tommy.
View Replies !
Can't Connect To Local Database Engine
I am trying to run MS SQL Server Management Studio Express. According to what I read, I can connect by selecting Database engine, then on server name, I put my computer name sqlexpress. I am using Windows Authentication. Every time, I get: TITLE: Connect to Server ------------------------------ Cannot connect to kennethsqlexpress. ------------------------------ ADDITIONAL INFORMATION: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ What am I doing wrong? Thanks for helping me to stop pulling my hair out.
View Replies !
SP2 Failed Only On The Database Engine And Now Won't Restart
I have a clean SQL 2005 Ent. x64 SP1 clean with no user db's.....applied SP2 and everything showed "Success" except the Database Services (Error 29534)...... Time: 02/22/2007 08:29:50.134 KB Number: KB921896 Machine: TORCA8 OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790) Package Language: 1033 (ENU) Package Platform: x64 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: No ********************************************************************************** Prerequisites Check & Status SQLSupport: Passed ********************************************************************************** Products Detected Language Level Patch Level Platform Edition Setup Support Files ENU 9.1.2047 x64 Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x64 ENTERPRISE Notification Services ENU SP1 9.00.2047.00 x64 ENTERPRISE Integration Services ENU SP1 9.00.2047.00 x64 ENTERPRISE SQL Server Native Client ENU 9.00.2047.00 x64 Client Components ENU SP1 9.1.2047 x64 ENTERPRISE MSXML 6.0 Parser ENU 6.00.3890.0 x64 SQLXML4 ENU 9.00.2047.00 x64 Backward Compatibility ENU 8.05.1704 x64 Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x64 ********************************************************************************** Products Disqualified & Reason Product Reason ********************************************************************************** Processes Locking Files Process Name Feature Type User Name PID ********************************************************************************** Product Installation Status Product : Setup Support Files Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Database Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29534 Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (1067) The process terminated unexpectedly. ---------------------------------------------------------------------------------- Product : Analysis Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixOLAP9_Hotfix_KB921896_sqlrun_as.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Reporting Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Notification Services Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Integration Services Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : SQL Server Native Client Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Client Components Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : MSXML 6.0 Parser Product Version (Previous): 3890 Product Version (Final) : 6.10.1129.0 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : SQLXML4 Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Backward Compatibility Product Version (Previous): 1704 Product Version (Final) : 2004 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- Product : Microsoft SQL Server VSS Writer Product Version (Previous): 2047 Product Version (Final) : 3042 Status : Success Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log Error Number : 0 Error Description : ---------------------------------------------------------------------------------- ********************************************************************************** Summary One or more products failed to install, see above for details Exit Code Returned: 29534 Now SQL Server service won't restart..... 2007-02-22 10:16:31.28 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1) 2007-02-22 10:16:31.28 Server (c) 2005 Microsoft Corporation. 2007-02-22 10:16:31.28 Server All rights reserved. 2007-02-22 10:16:31.28 Server Server process ID is 2056. 2007-02-22 10:16:31.28 Server Authentication mode is MIXED. 2007-02-22 10:16:31.28 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-02-22 10:16:31.28 Server This instance of SQL Server last reported using a process ID of 576 at 2/22/2007 10:16:15 AM (local) 2/22/2007 3:16:15 PM (UTC). This is an informational message only; no user action is required. 2007-02-22 10:16:31.28 Server Registry startup parameters: 2007-02-22 10:16:31.28 Server -d E:SQLDatamaster.mdf 2007-02-22 10:16:31.28 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-02-22 10:16:31.28 Server -l F:SQLLogsmastlog.ldf 2007-02-22 10:16:31.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-02-22 10:16:31.28 Server Detected 4 CPUs. This is an informational message; no user action is required. 2007-02-22 10:16:31.28 Server Cannot use Large Page Extensions: lock memory privilege was not granted. 2007-02-22 10:16:31.40 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-02-22 10:16:31.42 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-02-22 10:16:31.50 spid1s A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 36200, committed (KB): 104760, memory utilization: 34%. 2007-02-22 10:16:33.45 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-02-22 10:16:33.45 Server Database mirroring has been enabled on this instance of SQL Server. 2007-02-22 10:16:33.47 spid5s Starting up database 'master'. 2007-02-22 10:16:33.47 spid5s SQL Trace ID 1 was started by login "sa". 2007-02-22 10:16:33.48 spid5s Starting up database 'mssqlsystemresource'. 2007-02-22 10:16:33.48 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1. 2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. 2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1. 2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. 2007-02-22 10:16:33.48 spid5s Log file 'F:SQLLogsmssqlsystemresource.ldf' does not match the primary file. It may be from a different database or the log may have been rebuilt previously. 2007-02-22 10:16:33.48 spid5s The log cannot be rebuilt when the primary file is read-only. 2007-02-22 10:16:33.48 spid5s Error: 945, Severity: 14, State: 2. 2007-02-22 10:16:33.48 spid5s Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. 2007-02-22 10:16:33.48 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required. Tried reinstalling SP 2 in quiet mode using sapwd parameter.....now everything is showing the correct SP2 version but SQL Server Service won't start.......anyone????????
View Replies !
Where's My Default Sql Server Database Engine?
I am a novice in DB learning. A few months ago, I installed the ms sql server 2005, and use it to learn the book SQL Server 2005 for dummies. It worked just fine. But after i finished the book, i uninstalled the program and deleted the express database engine. Perhaps it was an incomplete installation, yesterday when i tried to reinstall the sql server 2005, i found some configuration tools still in the directory. So i used windows to remove those tools. After that, i reinstall the sql server 2005, and changed some values in the register. The reinstallation goes well. But after it was done. I started the management studio, there's no default database engine for me to connect! All I could find in Internet is how to connect to a database engine without information about how to create one. Can anyone tell me why and help me out? i am a novice.
View Replies !
What Are New In SQL Server 2008 Database Engine?
Hi, all here, Just heard about the coming release of SQL Server 2008. Anyone here got some ideas on what are significant new features in SQL Server 2008 Database Engine compared to SQL Server 2005 Database Engine? Would be very interesting to know that. Thanks. With best regards, Yours sincerely,
View Replies !
Database Engine Connection Error.
I got the sql2005 std edition at the msdn rollout, and the vs2005 studio. I uninstalled sql2000 and now, cannot connect to the database engine. I get the following error message with a link to an page that offers no info. What's up and how can I get it to work? Please, help. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
View Replies !
Error Connecting To Database Engine
I have been successfully using SQL Server 2005 developer edition for a couple of months now. However, when I started Microsoft SQL Server Management Studio this morning I could not connect to the €œDatabase Engine€? (I€™m using Windows Authentication). I can still connect with the €œIntegration Services€? and €œAnalysis Services€? on the same server. The server running on my local machine, so there shouldn€™t be any problems with the network. I am also able to connect with it through ODBC, it just seems to be the Server Management Studio which can€™t connect, and it only has problems with the €œDatabase Engine.€? Any help would be appreciated.David The detailed error message says: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (.Net SqlClient Data Provider) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476 ------------------------------ Error Number: 10061 Severity: 20 State: 0 ------------------------------ Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View Replies !
Database Engine Tuning Recommendations
Hi, I'm just testing the database engine tuning advisor. I created a basic trace file in SQL Server profiler by randomly opening a number of views in the Adventureworks db. I then used the Database Engine Tuning advisor to analyse this. The tuning advisors recommendation was to drop about 2-3 dozen indexes, which sounds like a really dumb idea. Is it normal for DET to recommend that any index not referenced by the workload file be dropped?
View Replies !
Seek Help To Understand The Jet Database Engine
Hi, I am reading the book by Steven Roman: "Access Database : Design and Programming" 3rd edition. On page 120, Figure 7-2, he showed the the structure of the Jet Database Engine, which is very confusing to me. According to this picture, I come to such an understanding: 1) VBA is just the hosting language for the Jet Database Engine; 2) Microsoft Visual Basic, Excel, Access, Word are hosting languages for VBA. Isn't this weird? VB hosts VBA? Thanks for any input!
View Replies !
Database Engine Tuning Advisor
Hi experts! I would like to ask for some help regarding Database Engine Tuning Advisor. I was trying to create Session Monitor then I choose TABLE as a workload. Then after creating and selecting the corresponding setup then I start the analysis, during the analysis it prompted an error? Error MSG: The specified workload(file or table) has no tunable events. Events must be one of the following types - SQL:BatchStarting, SQL:BatchCompleted, RPC:Starting, RPC:Completed, SP:StmtStarting or SP:StmtCompleted for workload trace file or table. But if I tried to use the Workload FILE instead of the table the session is successful and completed the analysis. My SQL current setup is client only, I was just accessing the server. Pls help me how to fix or do I need to configure something? Badly needed your help experts. Thanks in advance. Tatas move
View Replies !
Database Engine Tuning Advisor
Hi, If I run a tuning trace through the Database Engine Tuning Advisor that contains INSERT, UPDATE and DELETE statements. In the past I've not been too concerned about duplicate data as the tuning would be done on test data but in this case the databases are more mission critical. How does the Database Engine Tuning Advisor use the trace file? Does it run all the scripts against the database -and so inserting data etc? Or does it merely simulate the script? TIA Tim ---------------------------- I've finally started blogging (all be it badly!) Check it out: http://blogs.thesitedoctor.co.uk/tim/
View Replies !
|
TRACKER
