Date Data Type W/in SQL Server

Feb 27, 2008

Hello All!

Can anybody tell me how to add a date data type into SQL Server? I have a web application that collects data from users, and one of the data collected is the date. I would like to save that date as a date only and not as a datetime like SQL Server wants me to.

My first understanding is that, since SQL Server only allows a datetime data type, this is why it appends a time whenever a date is saved in or it appends a date whenever a time is saved in.

How do I accomplish this task of saving a date as a date only or a time as a time only? Is there a way to add a date or time data type w/in SQL Server? Or SQL Server just doesn't allow for it?

Any help is appreciated!

View 4 Replies


ADVERTISEMENT

COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS

Mar 7, 2007

We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.

I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.

On Error, If I fail the component, then the error is :

There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".

Regards

RH

View 3 Replies View Related

Unable To Insert Converted Date Into Date Column (Data Type)

Aug 24, 2015

PHP Code:

INSERT INTO [GPO].dbo.tblMetric  (KPI_ID, METRIC_ID, GOAL, REPORTING_MONTH, ACTUALS) 
SELECT 
    
      1 AS KPI_OWNER_ID
    , 23 AS METRIC_ID 
    , .75 AS GOAL 
    , CAST(Z.REPORTING_MONTH as DATE) AS REPORTING_MONTH
    , SUM(CAST(FTP_COUNT AS DECIMAL))/SUM(CAST(FULL_COUNT AS DECIMAL)) AS ACTUALS

[Code] ....

The insert column I am trying to get into is a date type. The original state of the field is YYYYMM varchar. How to get this into the table.

View 3 Replies View Related

How To Only Use Date From Datetime Data Type

Nov 27, 2011

How I can use only "date" from datetime data type? Because I want only date not time to be display in my application, how to do that ?

View 6 Replies View Related

Date: Auto Data Type

May 29, 2006

I am really new to this. Is there a way to set up a data type in SQL Server to automatically write the current date to a column? Instead of sending it from the page, the DB just writes the date to the column ...

Any guidance would be great!

-L

View 1 Replies View Related

Data Type Date ,Add Function

Oct 24, 2006

Hello

I have an accounts table in which i have a date, credit,debit,balance
columns.I gave the datatype for date column as datetime.But after entering the values,Date is displayed in a different format.How to display the date in our specified format.

And also,in the balance column i want to store the balance.amd when ever there is a credit or debit,i want to add or subtract from the balance correspondingly.How do i manipulate this .

Thanks In Advance
Poornima

View 6 Replies View Related

NULL For Date Data Type ?

Oct 23, 2007

Hi,
I created a function class in "Script Components" to convert an Integer to a Date data type. It works good except that it converts NULL value to the date 1988-12-31; but I want to return NULL when the value is NULL. Any idea on this?

Here is my function:

Public Class ScriptMain
Inherits UserComponent

Private Function ConvertToDate(ByVal dateIn As Double) As Date
Dim DateStr as String
...........
...........
If DateStr Is Nothing Then
Return Nothing
Else
Return CDate(DateStr)
End If
End Function

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Row.ReportDte = ConvertToDate(Row.RPRTDT)
End Sub
End Class

View 3 Replies View Related

Date Data Type-Conversion Error.

Jun 22, 2006

Dear friends,

I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.

Regional date setting for Server and Local systems are in dd-mm-yyyy format.


I am using following code

Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")

for the inserting into table using command

ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"

Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.

But if i used mm-dd-yyyy format ,it will get inserted.

What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format

Please help!!!


Graceson Mathew

View 1 Replies View Related

Comparing Date To A Datetime Data Type?

Dec 18, 2013

Is there a performance impact (if so, how great is it) when comparing a date to a datetime data type?

An educated guess suggests yes, as there will be a type casting... but then again I don't believe there's an issue when comparing an int to a tinyint and there's an assumption these would play by the same rules?

This has only come about because I'm considering changing the data type used in my standard calendar script and this popped in to my head.

View 5 Replies View Related

How To Format The Date Data Type Input In DD-MM-YY

Mar 4, 2004

hi all , does SQL server able to input the date that is originally from 2/6/2004 11:07:46 AM to DD-MM-YY 06-02-04 and store in the DB. For example , this is the SQL insert query

INSERT INTO ADMIN ( ID , NAME , DATE ) VALUES ( 'A001' , 'karen' ,'2/6/2004 11:07:46 AM')

the date will automatically converted to 06-02-04 and store in DB .

Does it need to use SQL Rule or user-defined data type.

View 1 Replies View Related

Simple Question About Date Data Type

Aug 25, 2007

I want to create a procedure where nextvisitdate is a cloumn for date
so when I passed variable @nextvisitdate then which data type I have touse with it.

CREATE PROCEDURE sp_salesman_nextvisitdate

@salesman varchar (50),
@nextvisitdate date (50)

As

Select * from Entry Form

WHERE

@salesman = salesman
AND
@nextvisitdate = nextvisitdate


GO


You Have to Loss Many Times to Win Single Time

View 3 Replies View Related

How To Compare Current Date With Sql Db Datetime Data Type

Nov 2, 2003

Hi,

I am using one datetime data type ( name: date_added ) and getdate() as default value. I want to display only those records added today. How I can compare current date with date_added.

Thanks
Manoj

View 1 Replies View Related

Creating Table With A Date Data Type, Urgent

Aug 13, 2001

Hi all,
I'm trying to create a temporary table with one of the columns with a datetime datatype. Sql server 7.0 is giving me an error:
Error 195 date is not a recognized function name.
Example of my create table looks something like this:
create table #temp_table(column_one int, column_two(15,2), Column_three datetime)

View 2 Replies View Related

Convert Date Format - Data Type Varchar

Aug 6, 2013

I have a column which is

Data type : varchar(10)
Date format : 8/5/2013

I want to convert that column to the following

Data type varchar: (8)
Date format : 20130805

View 5 Replies View Related

Converting Date Data Type In Stored Procedure

Jul 31, 2006

HI Experts...

I am using SQL SERVER 2005 standard edition

I have encountered a problem regarding converting date data type in stored procedure

As i was having problem taking date as input parameter in my stored procedure, so, then  I changed to varchar (16) i.e.

CREATE PROCEDURE sp_CalendarCreate
                                      @StDate VARCHAR(16) ,
                                      @EDate VARCHAR(16),

then I am converting varchar to date with following code

DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME

SELECT @STARTDATE = CAST(@STDATE AS DATETIME)
SELECT @ENDDATE = CAST(@EDATE AS DATETIME)

When I try to execute the procedure with following code

execute sp_CalendarCreate @stdate='12-1-06',@edate='20-1-06'

but it gives me following error

Msg 242, Level 16, State 3, Procedure sp_CalendarCreate, Line 45
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

Can any one tell me the  solution of that problem (at ur earliest)

regards,

Anas

View 5 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value (Date) To Data Type Int

Sep 2, 2015

I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB

ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014

I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."

Convert (varchar(10), "StartDate", 110)+1 as Next Day

View 8 Replies View Related

Reporting Services :: Error Converting Data Type Nvarchar To Date

Apr 29, 2015

I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.

USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]

[Code] .....

View 5 Replies View Related

T-SQL (SS2K8) :: Conversion Failed When Converting Character String To Small Date-time Data Type

Jul 15, 2014

All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:

Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.

USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]

[code]....

View 9 Replies View Related

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Dec 14, 2005

After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.

System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.

Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.

At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.

anyone having this problem before?? hopefully you guys can help.

Thanks,

View 4 Replies View Related

Converting A Data Type Double To A Type Float Using A Data Adapter &&amp; SSCE 3.5

Feb 13, 2008

Hi,

I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:


this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);

this.mycourtsDataSet1.AcceptChanges();

this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);


This did not happen with VS2005/CE3.01.

I have tried changing all references to decimal (or money in CE3.5) without luck.

I'm beginning to think that string may be the way to go!!!!!!!

Can someone shed some light on my problem.

Thanks,

Later:

It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.

View 4 Replies View Related

Error Of Date Type Field In SQL Server 2000 && Mshflexgrid

Jan 7, 2007

Hi
this is my problem.
mshflexgrid converts date value from dd.mm.yyyy to yyyy-mm-dd or mm.dd.yyyy

When i use JetOLEDB & .mdb file
I can show correctly date type field in mshflexgrid with str() function.
For example

rst.open"Select str(MyDateField) from table
set mshflexgrid.datasource = rst

i can see dd.mm.yyyy ' namely good
when i dont use str() function i see mm.dd.yyyy ' bad version

Now, i'm using SQL server 2000 & mdf file.
mshflexgrid don't show correctly date field ( i want it to be like dd.mm.yyyy ) because i cant use str() function with SQL sever 2000 & mdf file

For example
rst.open"Select str(MyDateField) from table... occur error
When i want to use Convert function in SQL server 2000 & mdf file
it automaticly converts it like Jun 18 2004 12:00AM but i dont want this

I want see this 18.06.2004 in Mshflexgrid.
What can i do. help me pls.

View 1 Replies View Related

SQL Server 2012 :: Using Lookup As Alternative In SCD Type 2 And Adding Date?

Apr 26, 2014

how i can add date using ssis or data tools 2012..My flat files had no date..den my instructor gave us a database where it has recordstartdate, recordenddate and currentdate.how i suppose to add date?

tell me the steps to how to do it?

View 2 Replies View Related

SQL Server 2012 :: Querying Table With Several Date Type Columns

Oct 30, 2014

I have a table (we will cal DateTable) with several (20) columns, each being a date type. Another table's (Project) PK is referenced in the DateTable.

I am trying to write a query that will pull all dates for a specific project from the DateTable if they meet certain criteria(i.e. if the date is <= 7 days from now.

I started with a normal select statement selecting each column with a join to the project and then a where clause using

(DateTable.ColumnName BETWEEN GETDATE() AND DATEADD(day, 7, GETDATE()) OR (DateTable.ColumnName BETWEEN GETDATE() AND DATEADD(day, 7, GETDATE())) ...

The rest of the columns(all with OR between them).

The problem with this is that because I am using OR once one of the dates meets the criteria it selects all the dates that are associated with the project. I ONLY want the dates that meet the criteria and don't care about the rest.

Obviously because I have all the columns in the select statement... So I need something like

Select ALL Columns
from DateTable d
Join Project p
where p.ProjectID = d.ProjectID AND only dates BETWEEN GETDATE() AND DATEADD(day, 7, GETDATE()))

View 2 Replies View Related

SQL Server 2014 :: Operand Type Clash - Int Is Incompatible With Date

Jul 3, 2015

This is a piece of my code:

SELECT TOP 1000 *...
case when Rownum<= datediff(day, salesdate, baseenddate)
then DATEADD(mm, RowNum, salesdate) /*error at this point*/
else 0 end as subscriptionrowdate
FROM Subsrow

Rownum is an integer type. DATEADD is the part when the error is but i dont know how to convert this to int

View 4 Replies View Related

How To Convert Datetime Field To A Date Field So Excel Recognize It As Data Type

May 17, 2015

I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE" .

How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?

I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)

**all of the above returned text objectes in excel and not date objects.

View 3 Replies View Related

A Text-type Value To A Date-type Value

Apr 2, 2008

Hi
Is it possibly in SqlDataSource's SelectCommad to convert a text-type value to a date-type value (11/1/2008 (text) -> 11/1/2008 (date) ) , so that order by can be used. Or is the other ways to use order by correctly with text-type (date)values
Thanks.

View 4 Replies View Related

Mapping Of SQL Server Data Types To Integration Services Data Type

Oct 14, 2005

Does anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services? 

View 6 Replies View Related

Report Builder - Read Data From SQL Server With Ntext Data Type

Apr 16, 2008

Hi all,

I have a column in SQL server which is of type ntext. Selecting the specific column to view it in report builder, an error message appears with the following description:

- Cannot run this report. The grouping expression 'nameofcolumn' returns the datatype binary. The Grouping Expression cannot return binary data.

Report Builder recognises this as if it was an image...

Thanks in advance!

View 2 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type!!

May 13, 2008

hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
 
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration

Partial Class Admin_emag_insert
Inherits System.Web.UI.Page

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now

End Sub

Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub

Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String

'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text

ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString

'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"

'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()

AddMessage.Text = "A new emagazine was added successfully"

Me.VersionTextBox.Text = ""

End Sub
End Class
 

View 10 Replies View Related

Converting Numeric Data Type To Text Data Type

Jul 20, 2005

Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin

View 1 Replies View Related

Changing User Defined Data Type's Data Type

Sep 12, 2006

Hi,



I have a user defined data type which is called DEmployeeName,

it's length is varchar(20), how do i change it into varchar(30) without droping it?

I'm using SQL server 2005.

Thanks in advance..

View 1 Replies View Related

Convert Text Data Type To Smalldatetime Data Type

Oct 9, 2007

I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.


SELECT rsbirthday CAST(rsbirthday AS smalldatetime)

FROM panelists


the error returned is "incorrect syntax near 'rsbirthday'.

I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.

Thanks for the help!

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved