Drop Object Procedure

Cannot Drop Object,,,,,,,,,,,help
I am trying to drop some tables, but keep getting the message:
Msg 3702, Level 16, State 1
Cannot drop the table 'TABLE' because it is currently in use. But it is NOT IN USE. I tried to do an sp_who, and I'm the only one. Please help. Thank you.

View Replies !   View Related

---

Drop Procedure
Hi,
 
I am a very new programmer hired to do stored procedures.
I want to drop  stored procedures with like names..Can I do that with single command something like
 
Drop Proc where proc like 'XY%'
 
Other alternative is write a stored procedure which is a  group of stored procedures.. selected from sys.objects.
Please help me ..
 
Thank you
Swapna
 
 

View Replies !   View Related

---

Drop And Create Procedure
I have to run a Big Sproc for make a lot of updates and insert. because trigger it take to many time.
I can drop the trigger before the procedure and recreate it after, but I wondered whether there existed of other solution?

Can I deactive the trigger? I'm affraid too got two copie of code for the trigger that why I dont really like the Drop-Create solution...


Thanks

View Replies !   View Related

---

Can't Drop Stored Procedure
I'm using SQL Serv 6.5. I've got a stored procedure that is DEFINITELY not in use but i can't drop it because it's telling me it is ???

I don't want to stop and start SQL Serv. Any ideas ??

thanks

Paul

View Replies !   View Related

---

Cannot Drop Stored Procedure
Hi folks,

I am using SQL Server 6.5. I try to drop a Stored Proc and I get the following Error Message "Error 3702: [SQL Server] Cannot Drop the Procedure 'xyz_sp' because it is currently in use."

There are no users in the Database and no process is using this stored procedure.

I have tried to drop this Stored Proc using the Enterprise Manager and throught ISQL_w. I get the same error.

Can anyone tell me why I am unable to drop this Stored Proc?

Thanks

View Replies !   View Related

---

If Exists DROP PROCEDURE/VIEW
how can I drop a propcedure or a view without error for MS SQL 2000/2500

for a table

IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[myTABLE]') AND type in (N'U'))
DROP TABLE [dbo].[myTABLE]


and for a procedure

IF EXISTS ???
DROP PROCEDURE [dbo].[SP_myTABLE_Count]

thank you for helping

View Replies !   View Related

---

SCPTXFR.EXE-- Problem With Drop Procedure
hi there
I am using SCPTXFR.EXE to generate script of the database(for backup),using following command.

SCPTXFR.EXE /s abc /d aaa /P abc12345 /f D:HSE0607SCHEMA.sql /q/r/T

Now the script is generating fine, but what i find that there is no statment like
"if not exists(...) "
for the Stored Procedure( i had applied the /r parameter), for the Create Tables it is there.

Why there is no statment IF NOT EXISTS(...) for Stored Procedure?
I need this Line, how can i do this??
Regards,
Thanks.
Gurpreet S. Gill

View Replies !   View Related

---

Drop Stored Procedure 'sp1' If Exist&"
How can i delete a stored procedure if it exist
like "Drop stored procedure 'sp1' if exist"

View Replies !   View Related

---

Could Not Find Server 'drop Procedure Dbo' In Sysservers
I have SQL SERVER 2005 with SP2 on windows XP professional.

When I execute DROP PROCEDURE manually,it works.
However when I execute inside a loop made using static cursors,
it generates following error
"Could not find server 'drop procedure dbo' in sysservers. Execute sp_addlinkedserver to add the server to sysservers."

OR it gives this error "Could not find stored procedure"

any idea???

View Replies !   View Related

---

Drop Stored Procedure Causing Dropped Tables
Hey guys, has anyone ever seen this happen:

Try to move stored proc from one DB to another using DTS, errors on create proc. Create proc manually.

Three tables referenced by that stored proc have been dropped and re-created with the same table structure.

I'm not 100% certain that it happened at exactly the same time, but it seems to be around the same time. Any ideas? Anyone seen this happen before?

View Replies !   View Related

---

Delete / Drop Extended Stored Procedure In 2005
We have a secuiry review and they have recommended dropping several xp_ stored procedures.  I have tried the drop procedure with no luck, Error 3701, or right click delete in Man Studio, same error.  I have granted the user alter permission to the master database and when I try to delete get Error 4606.  I try to grant CONTROL permission of the stored proc to the user and get another 4606 error.
 
Do I just have to control the permissions of these procedures tightly?
 
Thanks In Advance
MPM

View Replies !   View Related

---

Using OLE Object Within A Procedure
Can anyone help me address pros and cons of calling OLE object within a stored procedure. As we know system stored procedures such as sp_OACreate, sp_OAMethod are used to create and call OLE objects.

I have to decide between whether it is advisable to use sp_ in my procedures or to do something outside the database.

I need to use an external component to transfer files between FTP servers. This can be done using a procedure and job to schedule the calls.

Thank you,

Yogesh

View Replies !   View Related

---

Drop All Indexes In A Table, How To Drop All For User Tables In Database
Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob

View Replies !   View Related

---

Looping Through Each Row In An XML Object Sent To A Stored Procedure
I have an XML object (sent as a string, received as an XML datatype) that's in a Stored Procedure. Each row in the XML file will have 1 value from it inserted into one of three tables. The tables are depended upon the other value from the XML file.The XML File is layed out as:<Values>    <value>       <value>1</value>        <key>My_Field</key>      </value>    <value>
       <value>3523.2</value>
        <key>My_other_Field</key> 
    </value></Values>I basically need to go through it row by row, find out what table I need to insert the value into using the key field.Any help with this would rock. I'm using SQL 2005. 

View Replies !   View Related

---

Stored Procedure That Retrieve Object Name
Hi to all!
Is there a system stored procedure that retrieve info or name about an object?
I must know if a database contains a specific table and i must know if there is a specific DTS.. before execute it..
someone could help me??

thx a lot!

Ale.
Sorry for my poor english!!


bye! =)

View Replies !   View Related

---

Call COM Object From Stored Procedure?
Is there any wasy to access a COM object from a Stored Procedure? With Microsofts, non-stop "COM, COM, Everywhere" mantra, I would think I should be able to talk to COM from Tansact-SQL, but I can't seem to figure a way yet.

Any ideas...?

View Replies !   View Related

---

Please Help Stored Procedure, Invalid Object #tempactions
Can you please correct my stored procedure, all i am doing is trying to create a temporary table #tempactions.
When i am doing the following on query analyzer: execute createtempactions
I am getting the error : Invalid object #tempactions


CREATE PROCEDURE dbo.Createtempactions
AS
DECLARE @SQL nvarchar(2000)

if exists (select * from #tempactions)
Begin
Set @SQL = 'drop table #tempactions'
Exec SP_ExecuteSql @SQL
End

Set @SQL = 'Create Table #tempactions(Actionno INT NOT NULL,'+
'actioncode VARCHAR(200),'+
'assignedto VARCHAR(200),'+
'company VARCHAR(200),'+
'duedate datetime,'+
'completedate datetime,'+
'actiondescription VARCHAR(200),'+
'status VARCHAR(200),'+
'comment VARCHAR(200))'
Exec SP_ExecuteSql @SQL
GO


Thank you very much.

View Replies !   View Related

---

Trouble With Stored Procedure (Invalid Object Name)
I am having a bit of trouble with a stored procedure on the SQL Server that my web host is running.
The stored procedure I have created for testing is a simple SELECT statement:
SELECT * FROM table
This code works fine with the query tool in Sqlwebadmin. But using that same code from my ASP.NET page doesn't work, it reports the error "Invalid object name 'table'". So I read a bit more about stored procedures (newbie to this) and came to the conslusion that I need to write database.dbo.table instead.
But after changing the code to SELECT * FROM database.dbo.table, I get the "Invalid object name"-error in Sqlwebadmin too.
The name of the database contains a "-", so I write the statements as SELECT * FROM [database].[dbo].[table].
Any suggestions what is wrong with the code?
I have tried it locally with WebMatrix and MSDE before I uploaded it to the web host and it works fine locally, without specifying database.dbo.

View Replies !   View Related

---

Stored Procedure Creation,Invalid Object Name
 

I am trying to create a new stored procedure in Sql server managment studio express in a database.
I am getting an error message saying

Invalid object name 'Consumer_delete'.
 
Can you please tell why I am getting this error message?? Also , I need to make sure that the created procedure appears in the list of database objects after execution. 
Thanks for your help
 
 
 
SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

ALTER PROCEDURE Consumer_delete

@ConsumerID int,

@BusinessId int

AS

BEGIN

DECLARE @intError int

DECLARE @ConsBusinessID int

SET NOCOUNT ON

SELECT @ConsBusinessID = CONSUMERBUSINESS.[ID]

FROM CONSUMERBUSINESS

WHERE ConsumerID = @ConsumerID and BusinessId = @BusinessId

DELETE FROM CONSUMERBUSINESS

WHERE ConsumerID = @ConsumerID and BusinessId = @BusinessId

 

DELETE FROM CUSTOMERREMINDER

WHERE ConsumerBusinessID = @ConsBusinessID

DELETE FROM NOTE

WHERE ConsumerBusinessID = @ConsBusinessID

DELETE FROM VISIT

WHERE ConsumerBusinessID = @ConsBusinessID

 

--ERROR HANDLING--------

SET @intError = @@ERROR

IF @intError <> 0

GOTO ExitError

RETURN 0

ExitError:

RETURN @intError

END

View Replies !   View Related

---

How To Call Remote Object Using C# Stored Procedure
I want to call a windows based service running with remote objects listner from a C# Stored procedure. Any idea how to do that?

View Replies !   View Related

---

How Would You Execute Sp_changeobjectowner Stored Procedure Using Sqldmo Object
How do you use sqldmo object to execute system stored procedures? Anysuggestions would be appreciated.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View Replies !   View Related

---

Stored Procedure Won't List In 'Object Explorer' Window
I saved a stored procedure (see below) and I'm not seeing listed within the 'Databases' / 'Remote_Serials' (DB name) / 'Programmability' / 'Stored Procedures' folder within the 'Object Explorer' window.
 
I'm trying to perform a simple add-info-from-form-into-DB process.
 
Is it because of the way I put together the procedure?  I have a feeling that it is (was going off a video demo, which created it within VB.NET 2008 Express, but I'm not able to connect to the DB from there; it says the file is open, when I completely closed out of SQL Management Studio Express).



Code Snippet
ALTER PROCEDURE dbo.spInsertSerialInfo
@EmployeeID as nchar(10),
@First_Name as nvarchar(50),
@Last_Name as nvarchar(50),
@HAddress as nvarchar(50),
@City as nvarchar(30),
@HState as nvarchar(2),
@Zip as nvarchar(10),
@Phone_Home as nchar(15),
@Phone_Cell as nchar(15),
@Monitor1 as nvarchar(50),
@Monitor2 as nvarchar(50),
@PIX_ASA_Box as nvarchar(50),
@System_Case as nvarchar(50),
@Batt_APC as nvarchar(50),
@current_count as int OUTPUT
 
AS
 
INSERT RemSerials (EmployeeID,
First_Name,
Last_Name,
HAddress,
City,
HState,
Zip,
Phone_Home,
Phone_Cell,
Monitor1,
Monitor2,
PIX_ASA_Box,
System_Case,
Batt_APC)
 
VALUES (@EmployeeID,
@First_Name,
@Last_Name,
@HAddress,
@City,
@HState,
@Zip,
@Phone_Home,
@Phone_Cell,
@Monitor1,
@Monitor2,
@PIX_ASA_Box,
@System_Case,
@Batt_APC)
 
SELECT @current_count = Count(*) From RemSerials
 
 




When trying to access the stored procedure from VB.NET 2008 Express, it says, "Could not find stored procedure 'spInsertSerialInfo'."
 
I'm listing the code as below. 



Code Snippet
cmd.CommandText = "spInsertSerialInfo"
cmd.CommandType = CommandType.StoredProcedure
cmd.Connection = con
 

cmd.Parameters.Add("@EmployeeID", SqlDbType.NChar, 10).Value = txtEmployeeID.Text
 




If I change the 'CommandType.StoreProcedure' to 'CommandType.Text' it seems to find it, but then I get another error saying that the @EmployeeID variable has already been delcared and that I need to have a unique variable.
 
Any help would be greatly apreciated 

View Replies !   View Related

---

Getting “EXECUTE Permission Denied On Object 'sp_start_job'� From Activation Procedure.
Hi guys, please see if you can help me with this...
 
I have an activation stored procedure that starts a SQL Agent Job which executes a SSIS package.  However when the stored procedure runs it fails with the error EXECUTE permission denied on object 'sp_start_job'. The message queue was created under the €˜sa€™ account, and I have tried setting the activation procedure to run as SELF, OWNER as well as creating a user account with sysadmin rights and running it under that account, all with the same  result.  When I run the stored procedure manually (under pretty much any of the accounts I have set up) it executes without any errors and kicks off the job it is meant to.  The error only occurs when the stored procedure is activated via the service broker message queue. 
 
I changed the stored proc to write out system_user and current_user to a table so that I could see what it was running as and as it turns out it appears to be running as the correct user (which is €˜sa€™ when set to SELF) but not inheriting the correct permissions.
 
Is this a bug, and if so is there some work-around for it?
 
 

View Replies !   View Related

---

How Do I Call A Insert Stored Procedure From A Data Flow Destination Object?
I want to insert data calling a stored procedure and call this from a Data Flow destination object.  Is it possible?

 

I understand that Ole Db Command transformation object can call stored procedure, but that will not rollback in the event of error in the middle.

 

I understand that Ole Db Destination object will rollback in middle of import, but I don't see how to do the insert by calling stored procedure.  "Sql Command" option in Ole Db Destination object does not seem to present solution to the problem.

 

Am I missing something here or is Ssis / Microsoft demanding that Insert stored procedure not be used when using Data Flow destination object to insert data into target table?

View Replies !   View Related

---

Why User Defined Procedure Shows Under System Procedures In Object Explorer
I have created a store procedure in sql server 2005.
At first, it shows up as a normal user defined store procedure in Object explorer.
 
Recently, I found I could not found the procedure in normal place. But the execution is fine.
Finally I found it stays under system procedure folder.
 
 
How this could happen?
 

View Replies !   View Related

---

Server Error: Object Reference Not Set To An Instance Of An Object. Trying To Upload Image In Database
Does any one has any clue for this error ? I did went through a lot of articles on this error but none helped . I am working in Visual studie 2005 and trying to upload image in sql database through a simple form. Here is the code
 
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
using System.Web.Configuration;
using System.IO;
public partial class Binary_frmUpload : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{
}protected void btnUpload_Click(object sender, EventArgs e)
{if (FileUpload.HasFile == false)
{
// No file uploaded!lblUploadDetails.Text = "Please first select a file to upload...";
}
else
{string str1 = FileUpload.PostedFile.FileName;
 string str2 = FileUpload.PostedFile.ContentType; string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
//Initialize SQL Server Connection SqlConnection con = new SqlConnection(connectionString);
//Set insert query string qry = "insert into Officers (Picture,PictureType ,PicttureTitle) values(@ImageData, @PictureType, @PictureTitle)";
//Initialize SqlCommand object for insert. SqlCommand cmd = new SqlCommand(qry, con);
//We are passing Original Image Path and Image byte data as sql parameters. cmd.Parameters.Add(new SqlParameter("@PictureTitle", str1));
cmd.Parameters.Add(new SqlParameter("@PictureType", str2));Stream imgStream = FileUpload.PostedFile.InputStream;
int imgLen = FileUpload.PostedFile.ContentLength;byte[] ImageBytes = new byte[imgLen]; cmd.Parameters.Add(new SqlParameter("@ImageData", ImageBytes));
//Open connection and execute insert query.
con.Open();
cmd.ExecuteNonQuery();
con.Close(); //Close form and return to list or images.
 
}
}
}
 
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:



Line 32:
Line 33: string str2 = FileUpload.PostedFile.ContentType;
Line 34: string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
Line 35:
Line 36: //Initialize SQL Server Connection Source File: c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs    Line: 34  
Stack Trace:




[NullReferenceException: Object reference not set to an instance of an object.]
Binary_frmUpload.btnUpload_Click(Object sender, EventArgs e) in c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs:34
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102

View Replies !   View Related

---

' The Definition Of Object [object Name] Has Changed Since It Was Compiled' Error When Altering A Trigger In 2005
Hello All
 
Not sure if this is the right forum to post this question to, so if it's not, please accept my apologies.
 
I'm working in SQL Server 2005 with a database that was migrated to 2005 from SQL Server 2000.  I have to alter a trigger on a table for some functionality changes, and when I modify the trigger and then access it through the application the database is working with, I receive this error:
 

There was a error in the [stored procedure name] procedure. Error Number: -2147217900 Error Description: [Microsoft][ODBC SQL Server Driver][SQL Server]The definition of object '[trigger name]' has changed since it was compiled.
 

[stored procedure name] and [trigger name] are where the actual names appear in the message.
 
I've tried running sp_recompile on the trigger, stored procedure, and table that are associated with this, and nothing works.  I have dropped the trigger, which allows the save process to complete (but doesn't perform the required functionality, of course), and then re-created the trigger, but the error message still comes up.  The compatibility level for the database is SQL Server 2000 (80) (as it was migrated from SQL Server 2000 as I mentioned above).
 
Has anyone seen this, and if so, how can I fix it?
 
Thanks in advance for your help!
 
Jay

View Replies !   View Related

---

When Using A Sqldataadapter In VS 2005 I Get The Following Error At Runtime. Object Reference Not Set To An Instance Of An Object
Help! I have posted this before and I had hoped that the VS2005 SP1 would help my problem. It didn't. My code is shown below. I have dropped a sqlconnection, sqldataadapter and a strongly-typed dataset from the toolbox onto the component designer for my page and written my code. It compiles without any errors but at runtine I receive the system error "Object reference not set to an instance of an object." The error occurs at the first line where the sqldataadapter is mentioned. I have shufflled the code and the error still occurs at first mention of the dataadapter. I have set parameters to a simple string such as "myemail." It hasn't helped. I have used the "Dim" statement as "Dim DaAuthorLogin as System.Data.SqlClient.SqlDataadapter and Dim DaAuthorLogin as New ......) at the start of the private sub generated by the event requiring the data. Nothing helps. Here is my simple code to select data from a sqlserver 2000 database. Why do I continue to get this error?
Partial Class AuthorLogin
Inherits System.Web.UI.Page
Protected WithEvents AuthorInformation As System.Web.UI.Page
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.DaAuthorLogin = New System.Data.SqlClient.SqlDataAdapter
Me.MDData = New System.Data.SqlClient.SqlConnection
Me.DsAuthorLogin = New MedicalDecisions.DsAuthorLogin
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).BeginInit()
'
'SqlSelectCommand1
'
Me.SqlSelectCommand1.CommandText = "SELECT AuthorAlias, AuthorEmail, AuthorPassword, LastName, PreferredName" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "FRO" & _
"M T_Author" & Global.Microsoft.VisualBasic.ChrW(13) & Global.Microsoft.VisualBasic.ChrW(10) & "WHERE (AuthorEmail = @AuthorEmail) AND (AuthorPassword =" & _
" @AuthorPassword)"
Me.SqlSelectCommand1.Connection = Me.MDData
Me.SqlSelectCommand1.Parameters.AddRange(New System.Data.SqlClient.SqlParameter() {New System.Data.SqlClient.SqlParameter("@AuthorEmail", System.Data.SqlDbType.NVarChar, 50, "AuthorEmail"), New System.Data.SqlClient.SqlParameter("@AuthorPassword", System.Data.SqlDbType.NVarChar, 50, "AuthorPassword")})
'
'DaAuthorLogin
'
Me.DaAuthorLogin.SelectCommand = Me.SqlSelectCommand1
Me.DaAuthorLogin.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "T_Author", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("AuthorAlias", "AuthorAlias"), New System.Data.Common.DataColumnMapping("AuthorEmail", "AuthorEmail"), New System.Data.Common.DataColumnMapping("AuthorPassword", "AuthorPassword"), New System.Data.Common.DataColumnMapping("LastName", "LastName"), New System.Data.Common.DataColumnMapping("PreferredName", "PreferredName")})})
'
'MDData
'
Me.MDData.ConnectionString = "Data Source=CIS1022DAVID;Initial Catalog=CGData;Integrated Security=True;Pooling" & _
"=False"
Me.MDData.FireInfoMessageEventOnUserErrors = False
'
'DsAuthorLogin
'
Me.DsAuthorLogin.DataSetName = "DsAuthorLogin"
Me.DsAuthorLogin.SchemaSerializationMode = System.Data.SchemaSerializationMode.IncludeSchema
CType(Me.DsAuthorLogin, System.ComponentModel.ISupportInitialize).EndInit()
End Sub
Friend WithEvents SqlSelectCommand1 As System.Data.SqlClient.SqlCommand
Friend WithEvents MDData As System.Data.SqlClient.SqlConnection
Friend WithEvents DaAuthorLogin As System.Data.SqlClient.SqlDataAdapter
Friend WithEvents DsAuthorLogin As MedicalDecisions.DsAuthorLogin
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs)
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
'no code here
End Sub
Private Sub AuthorLoginRegister_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginRegister.Click
'for new author registration
Response.Redirect("AuthorInformation.aspx")
End Sub
Private Sub AuthorLoginBack_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginBack.Click
'to navigate back
Response.Redirect("MainPaths.aspx")
End Sub
Protected Sub AuthorLoginPassword_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AuthorLoginPassword.TextChanged
'pass the parameters to the dataadapter and return dataset
DaAuthorLogin.SelectCommand.Parameters("@AuthorEmail").Value = AuthorLoginEmail.Text
DaAuthorLogin.SelectCommand.Parameters("@AuthorPassword").Value = AuthorLoginPassword.Text
MDData.Open()
DaAuthorLogin.Fill(DsAuthorLogin, "T_Author")
MDData.Close()
'set session objects
If DsAuthorLogin.T_Author.Rows.Count > 0 Then
Session("AuthorAlias") = DsAuthorLogin.T_Author(0).AuthorAlias
Session("LastName") = DsAuthorLogin.T_Author(0).LastName
Session("PreferredName") = DsAuthorLogin.T_Author(0).PreferredName
Response.Redirect("AuthorPaths.aspx")
Else : AuthorLoginNotValid.Visible = True
AuthorLoginEmail.Text = ""
AuthorLoginPassword.Text = ""
End If
End Sub
End Class
 
Thanks in advance,
David

View Replies !   View Related

---

Error: The Script Threw An Exception: Object Reference Not Set To An Instance Of An Object.
 

Anyone know what this error means and how to get rid of it? 

 

Public Sub Main()

Dim myMessage As Net.Mail.MailMessage

Dim mySmtpClient As Net.Mail.SmtpClient

myMessage.To(20) = New Net.Mail.MailAddress(me@hotmail.com)

myMessage.From = New Net.Mail.MailAddress(someone@microsoft.com)

myMessage.Subject = "as;dlfjsdf"

myMessage.Priority = Net.Mail.MailPriority.High

mySmtpClient = New Net.Mail.SmtpClient("microsoft.com")

mySmtpClient.Send(myMessage)

Dts.TaskResult = Dts.Results.Success

End Sub

 

Thanks,

View Replies !   View Related

---

Delete SQL Script As400 Throwing Object Reference Not Set To An Instance Of An Object
I am trying to send some data back to our as/400 from SQL server. Before I do so I need to delete entries from the table. I have an odbc connection set up and have used it sucessfully in a datareader compoenent but but when I try to use it for a delete SQL task it give me the followign error.  what am I doing wrong?  I even tried hardcoding in the system name/library name.
 
Here is my delete sql script
DELETE FROM DSSCNTL Where Companycode = 10
 
 
TITLE: SQL Task
------------------------------
Object reference not set to an instance of an object.
------------------------------
BUTTONS:
OK
------------------------------

 

View Replies !   View Related

---

Predict Query Gives 'DMPluginWrapper; Object Reference Not Set To An Instance Of An Object' Error
 

Hi,

I am trying to develop a custom algorithm. I have implemented and tested training methods, however I fail at prediction phase. When I try to run a prediction query against a model created with my algorithm I get:
 

Executing the query ...
Obtained object of type: Microsoft.AnalysisServices.AdomdClient.AdomdDataReader
COM error: COM error: DMPluginWrapper; Object reference not set to an instance of an object..
Execution complete

 
I know this is not very descriptive, but I have seen that algorith doesn't even executes my Predict(..) function (I can test this by logging to a text file)
So the problem is this, when I run prediction query DMPluginWrapper gives exception -I think- even before calling my custom method.

As I said it is not a very descriptive message but I hope I have hit a general issue.

Thanks...

View Replies !   View Related

---

Object Reference Not Set To An Instance Of An Object. MSSQL Server Report Builder
When I try and run Report Builder Reports i get this error message "Object reference not set to an instance of an object. "

I can run reports locally but not from Report manager

here is the stack trace info

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:





[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces) +18
Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e) +358
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +482
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +958
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64





Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210

View Replies !   View Related

---

Microsoft Visual Studio Is Unable To Load This Document: Object Reference Is Not Set To An Instance Of An Object
Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx

<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">USkothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>

<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards

View Replies !   View Related

---

Problem In Converting MS Access OLE Object[Image] Column To BLOB (binary Large Object Bitmap)
Hi All,
i have a table in MS Access with CandidateId and Image column. Image column is in OLE object  format. i need to move this to SQL server 2005 with CandidateId column with integer and candidate Image column to Image datatype.
its very udgent, i need any tool to move this to SQL server 2005 or i need a code to move this table from MS Access to SQL server 2005 in C#.
please do the needfull ASAP. waiting for your reply
with regards
 
 
 

View Replies !   View Related

---

VS 2005 Error 'Object Reference Not Set To An Instance Of An Object' With Integration Services Project Create Failure
 

Just installed VS 2005 & SQLServer 2005 clients on my workstation.  When trying to create a new Integration Services Project and start work in the designer receive the MICROSOFT VISUAL STUDIO 'Object reference not set to an instance of an object.' dialog box with message "Creating project 'Integration Services project1'...project creation failed."
 
Previously I had SQLServer 2000 client with the little VS tool that came with it installed.  Uninstalled these prior to installing the 2005 tools (VS and SQLServer).
 
I'm not finding any information on corrective action for this error.
 
Any one have this problem and found the solution?
 
Thanks,
CLC
 
 

View Replies !   View Related

---

Update Problem, Error: Object Reference Not Set To An Instance Of An Object
Hi,
 
Hi created a Data adapter to get some info out of my SQLExpress database.
First I linked the data adapter to a gridview, and tested if I could gather, update,delete and insert info into tthe database through this gridview. No problems.
But because I want tot work with the data before I update my db tables, I've created a Business Layer between the adapter and gridview.
The busines layer consists of a object representing a country and methods to get, update, delete and isert data out and in of the DB. I use an objectdatasource in my presentation page to link the methonds with the insert, eduit and delete buttons of the gridview.
 Inserting and deleting entries is no porblem at all, editing the info however generates the following error:
"Object reference not set to an instance of an object"
Normally this means that you hace declared an variable, but you have still to create an instance, usung the New() method or provide an value for this object. Problem is, if a try to add the new() method then i get the error
"Error 1 Argument not specified for parameter 'rb' of 'Friend Sub New(rb As System.Data.DataRowBuilder)'
Can someone help me, I'm out of ideas! It's just the update method that is not working, the rest works fine.
Imports Microsoft.VisualBasic
Imports CountriesTableAdapters
Imports System.DataImports System.Data.SqlClient
 Public Class Country
Private _Country_ID As Integer
Private _ISO, _NL, _FR, _ENG, _Continent, _Remarks As String
Private _Enabled As Boolean
Public Property Country_ID() As Integer
GetReturn _Country_ID
End GetSet(ByVal Value As Integer)
_Country_ID = CInt(Value)
End Set
End Property
Public Property ISO() As String
GetReturn _ISO
End GetSet(ByVal Value As String)
_ISO = Trim(Value.ToString)
End Set
End Property
Public Property NL() As String
GetReturn _NL
End GetSet(ByVal Value As String)
_NL = Trim(Value.ToString)
End Set
End Property
Public Property FR() As String
GetReturn _FR
End GetSet(ByVal Value As String)
_FR = Trim(Value.ToString)
End Set
End Property
Public Property ENG() As String
GetReturn _ENG
End GetSet(ByVal Value As String)
_ENG = Trim(Value.ToString)
End Set
End Property
Public Property Continent() As String
GetReturn _Continent
End GetSet(ByVal Value As String)
_Continent = Trim(Value.ToString)
End Set
End Property
Public Property Remarks() As String
GetReturn _Remarks
End GetSet(ByVal Value As String)
_Remarks = Trim(Value.ToString)
End Set
End Property
Public Property Enabled() As Boolean
GetReturn _Enabled
End GetSet(ByVal Value As Boolean)
_Enabled = CBool(Value)
End SetEnd PropertyEnd Class
 
Public Class Countries
Private _CountriesAdapter As CountriesTableAdapter = NothingProtected ReadOnly Property Adapter() As CountriesTableAdapter
Get
If _CountriesAdapter Is Nothing Then_CountriesAdapter = New CountriesTableAdapter
End IfReturn _CountriesAdapter
End Get
End PropertyPublic Function GetCountries() As CountriesDataTable
Return Adapter.GetCountries
End FunctionPublic Sub AddCountry(ByVal ObjCountry As Country)
Dim CountriesTbl As New CountriesDataTableDim CountryRw As CountriesRow = CountriesTbl.NewCountriesRow
With ObjCountry
If String.IsNullOrEmpty(.ISO) ThenThrow New ArgumentException("ISO afkorting is verpicht", "ISO")
Else
CountryRw.ISO = .ISO
End If
If String.IsNullOrEmpty(.NL) ThenThrow New ArgumentException("Landsnaam is verpicht", "NL")
Else
CountryRw.NL = .NL
End If
If String.IsNullOrEmpty(.FR) ThenThrow New ArgumentException("Landsnaam is verpicht", "FR")
Else
CountryRw.FR = .FR
End If
If String.IsNullOrEmpty(.ENG) ThenThrow New ArgumentException("Landsnaam is verpicht", "ENG")
Else
CountryRw.ENG = .ENG
End If
If String.IsNullOrEmpty(.Continent) ThenThrow New ArgumentException("Continent is verpicht", "Continent")
Else
CountryRw.Continent = .Continent
End If
If String.IsNullOrEmpty(.Remarks) Then
CountryRw.SetRemarksNull()
Else
CountryRw.Remarks = .Remarks
End If
CountryRw.Enabled = .Enabled
End With
'Voeg nieuwe rij toe aan bestaande countriestable
CountriesTbl.AddCountriesRow(CountryRw)
'Voeg nieuw land toe aan de Database
Adapter.Update(CountriesTbl)
End SubPublic Sub UpdateCountry(ByVal ObjCountry As Country)
Dim CountriesTbl As New CountriesDataTableDim CountryRw As CountriesRow
CountryRw = CountriesTbl.FindByCountry_ID(ObjCountry.Country_ID)
If String.IsNullOrEmpty(ObjCountry.ISO) ThenThrow New ArgumentException("ISO afkorting is verpicht", "ISO")
Else
CountryRw.ISO = ObjCountry.ISO
End If
If String.IsNullOrEmpty(ObjCountry.NL) ThenThrow New ArgumentException("Landsnaam is verpicht", "NL")
Else
CountryRw.NL = ObjCountry.NL
End If
If String.IsNullOrEmpty(ObjCountry.FR) ThenThrow New ArgumentException("Landsnaam is verpicht", "FR")
Else
CountryRw.FR = ObjCountry.FR
End If
If String.IsNullOrEmpty(ObjCountry.ENG) ThenThrow New ArgumentException("Landsnaam is verpicht", "ENG")
Else
CountryRw.ENG = ObjCountry.ENG
End If
If String.IsNullOrEmpty(ObjCountry.Continent) ThenThrow New ArgumentException("Continent is verpicht", "Continent")
Else
CountryRw.Continent = ObjCountry.Continent
End If
If String.IsNullOrEmpty(ObjCountry.Remarks) Then
CountryRw.SetRemarksNull()
Else
CountryRw.Remarks = ObjCountry.Remarks
End If
CountryRw.Enabled = ObjCountry.Enabled
Adapter.Update(CountriesTbl)
End SubSub DeleteCountry(ByVal ObjCountry As Country)
Adapter.Delete(ObjCountry.Country_ID)End Sub
End Class
 
 
 
 
 

View Replies !   View Related

---

Object Reference Not Set To An Instance Of An Object (Inserting Data Into Database)
Each time I press submit to insert data into the database I receive the following message. I use the same code on another page and it works fine. Here is the error:


Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:


Line 125: MyCommand.Parameters("@Balance").Value = txtBalance.Text
Line 126:
Line 127: MyCommand.Connection.Open()
Line 128:
Line 129: Try


Source File: c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb Line: 127

Stack Trace:


[NullReferenceException: Object reference not set to an instance of an object.]
CreditRepair.CreditRepair.Vb.Creditor_Default.btnSaveAdd_Click(Object sender, EventArgs e) in c:inetpubwwwrootCreditRepairCreditor_Default.aspx.vb:127
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()



Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click

If (Page.IsValid) Then

Dim DS As DataSet
Dim MyCommand As SqlCommand

Dim AddAccount As String = "insert into AccountDetails (Account_ID, Report_ID, Balance) values (@Account_ID, @Report_ID, @Balance)"

MyCommand = New SqlCommand(AddAccount, MyConnection)

MyCommand.Parameters.Add(New SqlParameter("@Account_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Account_ID").Value = txtAccount_ID.Text

MyCommand.Parameters.Add(New SqlParameter("@Report_ID", SqlDbType.Char, 50))
MyCommand.Parameters("@Report_ID").Value = txtReport_ID.Text

MyCommand.Parameters.Add(New SqlParameter("@Balance", SqlDbType.Char, 50))
MyCommand.Parameters("@Balance").Value = txtBalance.Text

MyCommand.Connection.Open()

MyCommand.ExecuteNonQuery()

Response.Redirect("Customer_Details.aspx?SS='CustHeadGrid.Columns[0].Item.lblSS.Text)")

MyCommand.Connection.Close()
End If

View Replies !   View Related

---

Script Task Error --Object Reference Not Set To An Instance Of An Object
I am trying to execute this code feom Script task while excuting its giving me error that "Object reference not set to an instance of an object." The assemblies  Iam referening in this code are there in GAC. Any idea abt this.

 

Thanks,

Public Sub Main()

Dim remoteUri As String

Dim fireAgain As Boolean

Dim uriVarName As String

Dim fileVarName As String

Dim httpConnection As Microsoft.SqlServer.Dts.Runtime.HttpClientConnection

Dim emptyBytes(0) As Byte

Dim SessionID As String

Dim CusAuth As CustomAuth

Try

' Determine the correct variables to read for URI and filename

uriVarName = "vsReportUri"

fileVarName = "vsReportDownloadFilename"

' create SessionID for use with HD Custom authentication

CusAuth = New CustomAuth(ASCIIEncoding.ASCII.GetBytes(Dts.Variables("in_vsBatchKey").Value.ToString()))

 

Dts.Variables(uriVarName).Value = Dts.Variables(uriVarName).Value.ToString() + "&" + _

"BeginDate=" + Dts.Variables("in_vsBeginDate").Value.ToString() + "&" + _

"EndDate=" + Dts.Variables("in_vsEndDate").Value.ToString()

Dim request As HttpWebRequest = CType(WebRequest.Create(Dts.Variables(uriVarName).Value.ToString()), HttpWebRequest)

'Set credentials based on the credentials found in the variables

request.Credentials = New NetworkCredential(Dts.Variables("in_vsReportUsername").Value.ToString(), _

Dts.Variables("in_vsReportPassword").Value.ToString(), _

Dts.Variables("in_vsReportDomain").Value.ToString())

'Place the custom authentication session ID in a cookie called BatchSession

request.CookieContainer.Add(New Cookie("BatchSession", CusAuth.GenerateSession("EmailAlertingSSIS"), "/", Dts.Variables("in_vsReportDomain").Value.ToString()))

' Set some reasonable limits on resources used by this request

request.MaximumAutomaticRedirections = 4

request.MaximumResponseHeadersLength = 4

' Prepare to download, write messages indicating download start

Dts.Events.FireInformation(0, String.Empty, String.Format("Downloading '{0}' from '{1}'", _

Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), String.Empty, 0, fireAgain)

Dts.Log(String.Format("Downloading '{0}' from '{1}'", Dts.Variables(fileVarName).Value.ToString(), Dts.Variables(uriVarName).Value.ToString()), 0, emptyBytes)

' Download data

Dim response As HttpWebResponse = CType(request.GetResponse(), HttpWebResponse)

' Get the stream associated with the response.

Dim receiveStream As Stream = response.GetResponseStream()

' Pipes the stream to a higher level stream reader with the required encoding format.

Dim readStream As New StreamReader(receiveStream, Encoding.UTF8)

Dim fileStream As New StreamWriter(Dts.Variables(fileVarName).Value.ToString())

fileStream.Write(readStream.ReadToEnd())

fileStream.Flush()

fileStream.Close()

readStream.Close()

fileStream.Dispose()

readStream.Dispose()

 

'Download the file and report success

Dts.TaskResult = Dts.Results.Success

Catch ex As Exception

' post the error message we got back.

Dts.Events.FireError(0, String.Empty, ex.Message, String.Empty, 0)

Dts.TaskResult = Dts.Results.Failure

End Try

End Sub

 

View Replies !   View Related

---

Script Component Throws Object Reference Not Set To An Instance Of An Object
Hello,

I've ran into trouble while creating a rather simple transformation script component (one input, one output). The only thing it has to do is test the values coming from it's input rows and set the values of the output rows according to some rules; something like:





Code Block

Public Overrides Sub InputBrowser_ProcessInputRow(ByVal Row As InputBrowserBuffer)


If Row.UserAgent.Contains("MSIE") Then 'test input
            Row.BrowserName = "Internet Explorer" 'set output
End If



End Sub

This raises an "Object reference not set to an instance of an object." exception. Commenting out the input (Row.UserAgent) solves the exception, but I actually do need to test the contents of the input row (and by leaving only the output manipulation, the script won't reach it's end, the components remain yellow). What can I do about this?


Thanks in advance!

View Replies !   View Related

---

Report Server Issue Object Reference Not Set To An Instance Of An Object
Hi all,

I'm getting this problem 'Object reference not set to an instance of an object.' whenever I try to review a report and I checked the log file and this is what it had

 

w3wp!ui!1!11/14/2006-10:54:20:: Unhandled exception: System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces)
   at Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e)
   at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
   at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
   at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Some previous forums stated checking the webconfig file but the web config file look okay. Is there another way to fix this.

 

Much Thanks,

 

Carl

 

 

 

View Replies !   View Related

---

Object Reference Not Set To An Instance Of An Object As System.NullReferenceException
Hi,

I am using a stored procedure and places the value into a dataset.
But it prompts me an error.

And here is my code:

Dim cmd As New SqlCommand("testProc", mySqlConnection)

cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@PrdCode", SqlDbType.VarChar, 50).Value = strBonPrdCode
cmd.Parameters.Add("@keyWord", SqlDbType.VarChar, 250).Value = srchKeyword
cmd.Parameters.Add("@keyWord_Count", SqlDbType.Int).Value = Keyword_count

Dim da As New SqlDataAdapter(cmd)
Dim ds As New DataSet

da.Fill(ds, "Results")

recCount = ds.Tables("Results").Rows.Count


Can you give me a solution to solve this problem. Thanking you in advance.

View Replies !   View Related

---

Query Builder - Object Reference Not Set To An Instance Of An Object
When I access query builder when configure SqlDataSource I receive
"Object reference not set to an instance of an object". I tried to reinstall
FW 2.0 but without success.
I also tried contact my local support vendor  and google of course but
no results was found.
Thank you
 
Martin

View Replies !   View Related

---

SSIS Design : Object Reference Not Set To An Instance Of An Object
In visual studio 2005, I create a new Integration Services Project. It tries to create the first package by default "Package.dtsx". The "Package.dtsx[Design]" tab displays

Microsoft Visual Studio is unable to load this document

Object reference not set to an instance of an object

I try to create new SSIS package or edit an existing one (from tutorial), I get the same error in the SSIS graphical user interface tab.

Thanks for your help.

 

View Replies !   View Related

---

Script Task Component: Object Not Set To Instance Of Object
 i have some code in a script task component which is meant to find a cell in an excel sheet and assign a variable to its value in the script component. I receive an error that the object is not set in instance of object. below is the code which i tried to simplify to find the error, but it is still occurring.  any help would be appreciated. thank you
 
 

Dim vars As IDTSVariables90

vars.Unlock()

Me.VariableDispenser.LockForWrite(Variables.freq)

Variables.freq = "1"

View Replies !   View Related

---

System.NullReferenceException: Object Reference Not Set To An Instance Of An Object - Help
I have a script task that worked FINE yesterday. Now when I run it, I get the following error:
 
[myTask [64]] Error: System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)    at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
 
Help!
 
 

View Replies !   View Related

---

EXECUTE SQL TASK --&&> Object Reference Not Set To An Instance Of An Object
 

 

 
Hi all,
 
Does anyone see the error below before?
I am using SSIS Execute SQL Task (ADO.NET) to update a table using a stored procedure.
It works like this many times for me and all of a sudden, not sure what is changing in the environment, I kept getting this WARNING when I click on PARSE QUERY
€œObject Reference Not Set to An Instance of an Object€? when I click on PARSE QUERY.
 
This is going against SQL SERVER 2005 SP2 x64 Enterprise.
 
Note that this task executes fine and the stored procedure updates data.
 
The stored procedure does the following.
There are other stored procedures of different kinds and they all worked.
But all of them give this error when I click on PARSE QUERY.
 



Code Snippet
DECLARE @TodayDate datetime
SET @TodayDate = GETDATE()
 
Exec dbo.updDimBatch
 @BatchKey = @BatchKey,
 @ParentBatchKey = @ParentBatchKey,
 @BatchName = 'Load Customer Increment',
 @BatchStartDate = NULL,
 @BatchEndDate = @TodayDate,
 @StatusKey = NULL,
 @RowsInserted = @Count_Insert,
 @RowsUpdated = @Count_Update,
 @RowsException = NULL,
 @RowsError = NULL,
 @UpdatedDate = @TodayDate,
 @BatchDescription = NULL
 
OLEDB Sample also give me syntax error
 
exec dbo.updDimBatch ?,?,'Load Activity Increment','6/27/2007','6/27/2007',1,?,?,0,0,'6/27/2007',''




 

I tried to change to OLEDB and call the stored procedure like this but got syntax error?

Not sure what is the error here.

 

 

 

 

 

View Replies !   View Related

---