Error Programaticaly Rendering A Report Using Reporting Services Web Services

Dec 19, 2006

I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.

<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;

ParameterValue[] parameters = new ParameterValue[2];

parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";

parameters[1] = new ParameterValue();

parameters[1].Name = "pClass";

parameters[1].Value = "8";


ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;

byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>

Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():

<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>

I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.

Any help would be much appreciated.

View 3 Replies


ADVERTISEMENT

Reporting Services :: Error While Rendering Report To PDF From Share Point?

Nov 5, 2015

I am trying to export ssrs report from sharepoint to pdf file.But i am getting error in it."Sorry, Something Went Wrong".But when i try to render report in visual studio when i preview report. It gets exported in 14 minutes. but there is no error.

View 2 Replies View Related

Reporting Services :: How To Stop Rendering A Report

May 2, 2015

I am building reports using MS Visual Studio, and in the Preview tab I have the Refresh button and a button with a X to stop a report while rendering. However, when I deploy the report to the reporting server and I run it from the application the X button is not there, and users would find it useful sometimes to be able to stop long running reports. Is this a configuration change?

View 2 Replies View Related

Reporting Services :: Rendering Options For Report Specific

Apr 29, 2015

I want to Set Rendering Extension Report based,

Example

Report 1 should have the rendering options of EXCEL and PDF.
Report 2 should have the rendering extension of EXCEL only.

I referred below link for change the rendering extension. [URL] .... but its for all the reports format.

View 6 Replies View Related

Reporting Services :: Operation Has Timed Out When Rendering A Report

Mar 29, 2010

I'm using ReportingServices 2008 and I've this message "The operation has timed out" when rendering a report with some parameters. I've set in the execution properties of this report : Do not apply the expiration time for the execution of the report.When I look the ExecutionLogStorage table from Report Server DataBase I see that I've no message for this report when timeRendering is 21109ms. When I change the report parameters to obtain more data, the timeRendering is 76866ms and I've the message "The operation has timed out".

View 9 Replies View Related

Reporting Services :: Interpreting Specific Report Rendering From What The Log Shows

Jul 7, 2015

We run std 2008.   In my ssrs log I see this for one of our most critical reports...

library!ReportServer_0-64!2244!07/07/2015-08:24:53:: Call to GetPermissionsAction(/somedirectory/somedirectory1).... which I assume is an indication of a report starting to render by first checking permissions.

Around the time my user says he still saw the revolving arrow and he stopped the report because he felt it was running too long, I see...

webserver!ReportServer_0-64!1dbc!07/07/2015-08:54:44:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''

How can it be true that he stopped it and ssrs reports that it processed the report?

About 4 minutes later I see this entry in the log...

webserver!ReportServer_0-64!15e4!07/07/2015-08:58:34:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''

Which processed report message is right?  Could there be multiples cuz of subreports? I see a number of errors and exceptions around these same times but do not know how to tie either to a specific report. Is there a way?

View 3 Replies View Related

Reporting Services :: RDL Report Rendering For HTML Format Fails

May 13, 2015

We are facing an issue where the report rendering for specific report parameters is failing with an exception 

Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.CalculateDetailCell(PageItem topItem, Int32 colIndex, Boolean collect, PageContext pageContext)

[code]....

The server is running in Native mode. We tried restarting the services and also verified the disk space. Neither of them worked. The ExecutionLog3 table in the "ReportServer" database shows a rrenderingError as the report execution status. Report rendering with Excel format works fine.We enabled verbose logs and they are shared here. URL....

View 7 Replies View Related

Reporting Services :: SSRS 2005 Custom Report Rendering Format Not Working?

Jun 3, 2015

I'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.

I've tried starting and stopping reporting services and it still does not works.

I've also modified the existing csv extension  with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting  just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053

View 11 Replies View Related

Reporting Services :: Image Not Sized Correctly When Rendering Report In WORDOPENXML Format

Sep 18, 2015

In an asp.net app I'm creating email attachments from ssrs reports and am rendering them In Word and Excel using the WORDOPENXML and EXCELOPENXML format extensions.  When I render the report in excel, the image is sized correctly, however, when I render the same report in word, its very small.  I will attach a screenshot of each, and in the word screenshot, I will select the image so you can see the image control's outline (the control's actual size).  Notice the image inside of the border is very small.  How can I resolve this?

first, excel:

and now in word:

View 3 Replies View Related

Reporting Services :: Adding Drill Through Parameters Increasing Rendering Time On Report Server

Nov 2, 2015

I have a report which takes around 5 seconds when run in BIDS but takes around 20 seconds when deployed on report server.Execution log says TimeDataRetrieval is around 3-4 seconds and  rendering time is around 15-17 secs.From this report I am passing 8 parameters to a  drill through report and there are 36 text boxes where I have defined these parameters for drill through action.All these parameters are populated in main dataset.When I deployed the same report without any drill through action and parameter, it takes 5 seconds.So I am suspecting that because of drill through parameters report is taking more rendering time on server.I am using 2008R2 and IE11.

Is it expected behavior that due to so many parameters for drill through action, report will take more rendering time?If yes, then why is it not taking same time in BIDS?

View 5 Replies View Related

Reporting Services Rendering

Oct 6, 2004

We use Reporting Services for most of our reporting needs internally. However, we do have several products that we ship out into the field that run off local databases. These applications require reporting but often are not big enough for SQL Server and rarely run on a server with IIS.

Since MS has made .RDL an open xml standard does anyone know if there are any client rendering engines being developed? We would like the ability to develop all of our reports in .RDL and have them rendered in Reporting Services or in our standalone apps that run off MSDE or Access. Currently this is not possible. But, I think that someone could write a client renderer (like Crystal Reports has) to allow the use of .RDL files off a local data source without SQL Server and Web Services.

Thanks for any info on the subject.

Smoke

View 1 Replies View Related

Reporting Services - Rendering

Jan 25, 2007



I have created reports using Reporting Services and the problem I am having is with the Print Layout. I view a report with parameters and print. I then change the parameters and click 'View Report' again and the new report is displayed. However, the report does not refresh in the Print Layout, so if I try to print the 2nd report, the first report is the one that is printed. Any ideas how to solve this?

Thanks

View 3 Replies View Related

Reporting Services :: SSRS Rendering In CSV

Jun 11, 2015

My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit

I amended the configuration file of rsreportserver.config with the below:

<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
  <Configuration>
  <DeviceInfo>
   <Encoding>UTF-8</Encoding>
  </DeviceInfo>
  </Configuration>
   </Extension>

If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.

However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.

View 2 Replies View Related

Reporting Services Rendering Extension In SSRS 2005

Apr 30, 2008



I have written a custom rendering extension for my reporting services. In one of my function inside custom rendering assembly, I want to access the underlying dataset and manipulate with it. I gain some knowledge on dataextension but not able to use it successfully. Can someone please help me get to underlying dataset?

Thanks.

View 2 Replies View Related

Reporting Services :: Image In SSRS In PNG Format - PDF Rendering

Nov 4, 2015

I have a image in SSRS which is of PNG in format. when I preview the image it is coming as expected but if I  export that to PDF the image is having the black color back ground. One more point to be noted here is my actual image file is having a small shading in it which is not visible properly, but the same back ground is coming with full black color line in the PDF form.

Another issue is : I have 3 sub reports in my SSRS report. In the preview I can see the data is coming in order of sub reports but if I export it to PDF the second sub-report data is coming at the end of the report and first and 3rd sub reports are fine. But If I have only one record for 2nd sub-report the order is same in both the Preview page as well as in the PDF format.

View 4 Replies View Related

Reporting Services :: HTML Table Not Rendering In SSRS

Apr 5, 2011

I have some HTML stored in a SQL Server table that I want to render in Reporting Services 2008,

HTML data contain HTML table. While generating report, SSRS not able to render it properly as table.

How we can display the HTML data as it is in SSRS 2008?

View 4 Replies View Related

Images Not Rendering When Exporting To HTML Using Reporting Services

Jan 16, 2008

Hi everyone,

Our system is set up using SQL Server 2000 and Reporting Services for SQL Server 2000. Our web application is built with Visual Studio 2003, C# and .Net Framework 1.1 and is a 3-tier application. On both our localhost and development builds of the application, the images that get rendered do show up properly. On our live build, the images do not.

One difference that we found is that on the live build, users do not have file permission access to our middle tier that is running reporting services. After examining the URL of where the image is trying to point to, we see that it is trying to access the middle tier from the front presentation tier.

My question is, is there a way to send a certain parameter into the Render method to have the images stored somewhere else? Any help would be greatly appreaciated. Here is the code we currently have:

ReportingService rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;

try
{
//Response.Write("Format: " + format);
if (format == "HTML4.0")
{
// Render arguments
byte[] result = null;
string historyID = null;

string devInfo = "<DeviceInfo><HTMLFragment>True</HTMLFragment></DeviceInfo>";
DataSourceCredentials[] credentials = null;
string showHideToggle = "true";
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ParameterValue[] reportParameters = null;
SessionHeader sh = new SessionHeader();

reportParameters = new ParameterValue[5];

reportParameters[0] = new ParameterValue();
reportParameters[0].Name = "par_userID";
reportParameters[0].Value = userID;

reportParameters[1] = new ParameterValue();
reportParameters[1].Name = "par_menuID";
reportParameters[1].Value = menuID;

reportParameters[2] = new ParameterValue();
reportParameters[2].Name = "par_URL";
reportParameters[2].Value = reportURL;

reportParameters[3] = new ParameterValue();
reportParameters[3].Name = "par_startPage";
reportParameters[3].Value = startPage;

reportParameters[4] = new ParameterValue();
reportParameters[4].Name = "par_endPage";
reportParameters[4].Value = endPage;

//Clean up old files
RemoveFiles(ConfigurationSettings.AppSettings["tempFileLocation"]);

result = rs.Render(reportPath,
format,
historyID,
devInfo,
reportParameters,
credentials,
showHideToggle,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);

// // For each image stream returned by the call to render,
// // render the stream and save it to the application root
// byte[] image;
// string optionalString = null;
// string tempFilePath = ConfigurationSettings.AppSettings["tempFileLocation"].ToString();
//
// foreach (string streamID in streamIDs)
// {
// image = rs.RenderStream(reportPath,
// "HTML4.0",
// streamID,
// null,
// null,
// reportHistoryParameters,
// out optionalString,
// out optionalString);
//
// FileStream stream = File.OpenWrite(tempFilePath + streamID + ".png");
// stream.Write(image, 0, image.Length);
// stream.Close();
// }

// Write the results to the current Web page
string htmlout = Encoding.ASCII.GetString(result);
htmlout = htmlout.Replace("<hr/>", "");

rs.Dispose();
return htmlout;
}

View 1 Replies View Related

Reporting Services :: How To Avoid Details Collection In XML Rendering

Feb 10, 2009

I rendered this xml from SSRS 2008. Is there a way to avoid the "details_Collection" tab in the rendered xml doc. Please see the colored tabs. These tabs are created from groups named Company and Info.

View 9 Replies View Related

Reporting Services :: Standalone Rdlc With External Dataset And PDF Rendering?

Aug 26, 2015

I need to create a report in SSRS 2015 but I need to bind that report to an external dataset .

 I need it to work with parameters  and stored procedure.

Another issue is that the report is standalone -rdlc.

Can I call the report from a webservice .asmx not wcf and render it automatically in pdf format?

View 6 Replies View Related

Reporting Services :: Data Visualizations - Gauges Charts Not Rendering

May 22, 2015

We have recently migrated to SSRS2012 and since this time any report with a gauge or a chart within will not render. Upon researching even newly created reports will not render them. 

View 2 Replies View Related

Reporting Services :: SSRS 2014 Default Rendering Extension

Sep 25, 2015

I installed SSRS 2014 Reporting Services on a 2008R2 Enterprise server. When I try to subscribe to a report (also SQL 2014), the default rendering is MHTML. I want to change this default to EXCEL.

I updated the rsreportserver.config file and restarted SQL Server Reporting Service.  Now, the default rendering for a subscription is 'XML file with report data' which is the first <Render> data element.  If I change

<DefaultRenderingExtension>EXCEL</DefaultRenderingExtension> back to <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>

And restart SSRS Service, the default subscription rendering is MHTML.

 <DeliveryUI>
 <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>

[Code] ....

View 2 Replies View Related

Reporting Services :: SSRS Print Layout Support RTL Rendering

Apr 28, 2015

Is there a support of printing report with matrix that is set to RTL (LayoutDirection) which displays in ReportViewr control with property RightToLeft set to RightToLeft.Yes in DisplayMode = PrintLayout.

The report looks fine in the report viewr in DisplayMode = Normal, but when goes to PrintLayout, it seems that the left data on page is rendered first.

Example: This is the display of the report viewer, I would like to print the columns by the same order it displays here:

And this is the result when clicking Print Preview: the first page displays the data of the last columns and if i go to the last page (page 9) i will see the data of the first column as displays in the previous gif, I don't have a clue why?

Is there a property that can be set to force the print layout to render RTL. Anyway, it seem to me as a bug since the Report Viewer displays the data correctly and renders the data RTL as expected.

View 3 Replies View Related

Reporting Services :: MVC Report Viewer Error

Sep 2, 2015

I have created a project using MVC 4 application.i have created a dataset model and .rdlc file using report viewer but i'm getting the following error when i run it.

View 5 Replies View Related

Reporting Services :: Out Of Memory - Clustered Chart Rendering With Number Of Columns

May 5, 2015

Getting old favourite message 'Out of Memory' when running a horizontal clustered chart with Category: 200 items Series: 200 items per Category.URL... 'By default, the report server sets WorkingSetMaximum to the amount of available memory on the computer. This value is detected when the service starts.' 

The report has been tried on 3 large servers with 30GB & 60GB memory. The report runs on a 2008 install but not a 2008R2 install. We've created a test report that simply generates a series of data 1-n for Category and 1-n for Series where n can be set by parameter - so the issue is not to do with the volume of data or the processing required by SSMS. The report runs if the data is output to a table rather than a chart - so the issue appears to be with rendering the chart.

The chart is rendered when the Category has 200 items with a Series of 150 per Category. The report fails with Category 200 items and Series 200 per Category.

View 2 Replies View Related

Slow Performance When Rendering Pages In SQL Server 2005 Reporting Services

Jul 3, 2007

I have designed a fairly simple report in report designer that uses an analysis services cube as its input, and a basic matrix object as the primary design component. Cube performance either via object browser in Analysis Services or via connection from Excel is great. It does exactly what you build a cube for, i.e. it builds aggregations you can get to quickly. However rendering from a report designer report within Report Manager is a different story.



Even though this report is being rendered from an execution snapshot, it is painfully slow at opening and closing different levels of drill down. The report does have six levels of drill down, which I am sure is a factor. If I use a smaller dataset, performance does become more acceptable. However, I don't consider the requirements of my report to be all that extraordinary.



My conclusion thus far is that larger data sets with many possible page renderings are not the best candidates for HTML rendered reports. In this case Microsoft's cube analysis add-in to Excel might be a better choice. Thoughts and feedback on either how to improve the rendering speed or other presentation alternatives that would perform better would all be welcome.



View 5 Replies View Related

Reporting Services Error 500 -- Report Server Not Responding

Jan 15, 2008



For a week now, I have been reading every fix I can find for the infamous Reporting Services error(s) and none of the fixes have worked for me. I have checked permissions and memberships of the reporting services groups, removed xmlns as mentioned, made sure that the Classic App Pool was being used, started, stopped, reinstalled, made sure the RSWebApplication.config had the URL or not, either way nothing is working for me.

Is there some place where all of the various fixes are consolidated? Can anyone help me? I'm dying over here. It worked on a previous image and I rebuilt it and can't get it to work. I have SQL 2005 sp2 on Vista...all of the IIS requirements are met and the RS configuration utility reports that everything is fine.

Thanks,

Eric

View 2 Replies View Related

Reporting Services :: SSRS Report Export To PDF Error

Sep 16, 2015

SSRS report exporting to pdf generates this error 

<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rrRenderingError</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred during rendering of the report.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rrRenderingError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5343.0</HelpLink><ProductName

[code]...

View 2 Replies View Related

Reporting Services :: Error Occurred During Report Processing

Jun 9, 2015

When we are trying to open the reports on share point 2013 site this error came?

View 2 Replies View Related

Reporting Services :: SSRS 2012 - CSV Rendering / Turn Off Double Quote Qualifier

Sep 29, 2015

I have scoured the Microsoft forums and the internet to find out how I can generate the output of a CSV report that has double quotes around each value and is comma separated as follows:

"Abcd","123456","Efghi","789012","JKLMN"

If I try to concatenate double quotes around the values in the stored procedure or in the RDL, two double quotes appear around each value as follows. 

""Abcd"",""123456"",""Efghi"",""789012"",""JKLMN""

I understand that this is because the default qualifier is double quote.  What I see is that every time a double quote appears in a value (along with commas and line breaks), the qualifier will activate.  Is there any way to turn this off for double quotes? 

If I try to enter:  <Qualifier>false</Qualifier>, the word "false" appears as the qualifier instead.

The only way I have found that produces a result similar to what I need ("Abcd","123456","Efghi","789012","JKLMN") is if I add a line break - chr(10) in the RDL in each field. However, this won't work for me because I can't have line breaks in each field in the output. 

Note that in SSRS 2005, I was able to produce the report output as I state above by setting the field delimiter and qualifier as follows:

<FieldDelimiter>@?!?@</FieldDelimiter>
<Qualifier>?#^?</Qualifier>

This essentially turned the field delimiter and qualifier off, as the values entered would never appear in the data.  I then could add double quotes and commas in the RDL.  This used to work in the old version but does not anymore.

View 4 Replies View Related

Reporting Services Error When Preview/publish A Report Containing SAP BI Hierarchy

Jan 28, 2008

Hi SSRS Experts

I'm trying to create a report using a SAP BI InfoCube as my datasource.
One of the fields in the InfoCube (GL Account) consist of a 3 level hierarchy, which need to be reported on.
The query that I built using QueryBuilder executes fine and displays the hierarchies correctly, but when I preview the report, i get the following error:

An error occurred during local report processing
An error has occurred during report processing
Query execution failed for data set "SAPBWD"
The "0GL_ACCOUNT 1000IE" Object was not found.


0GL_ACCOUNT is the GL account field to report on
1000IE is the selected GL Account Hierarchy to be displayed

Here's the query that was generated using query builder:

SELECT NON EMPTY { [Measures].[D2A3Y7ANS9YOF2FONXMUS9RAI] } ON COLUMNS, NON EMPTY {[0GL_ACCOUNT 1000IE].[LEVEL03].ALLMEMBERS * [ZF_MC].[LEVEL01].ALLMEMBERS } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [ZFGL_M03/ZREP_BOR001] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING SAP VARIABLES [ZFV_FY] INCLUDING [0FISCYEAR].[Z12007] [ZFV_PC] INCLUDING [0PROFIT_CTR 1000FS].[10000001000033] [ZFV_RM] INCLUDING [0FISCPER3].[005] [ZFV_PV] INCLUDING [0VERSION].[003]



I hope you would be able to assist.

Kind Regards
Utian Goliath

View 1 Replies View Related

Error While Connecting To Reporting Services Engine &&amp; Report Manager

May 20, 2008

Hi,

I am getting an error:

1. While connecting to the Reporting Services Engine (Using SQL Server Management Server). The error message is given below. Report Server is working fine, I am able to browse the reports from the report server.

------------------------------------------------------------------------------------------------------------------------------------------------------------
TITLE: Connect to Server
------------------------------
Cannot connect to BTP8NMB03.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<HTML dir="ltr">
<HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title>

Error
</title><link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css?rev=5msmprmeONfN6lJ3wtbAlA%3D%3D"/>
<script type="text/javascript" language="javascript" src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script>
<script type="text/javascript" language="javascript" src="/_layouts/1033/core.js?rev=F8pbQQxa4zefcW%2BW9E5g8w%3D%3D"></script>
<meta name="Robots" content="NOINDEX " />
<meta name="SharePointError" content=""/>
</HEAD>
<BODY scroll="yes" onload="javascript:if (typeof(_spBodyOnLoadWrapper) != 'undefined') _spBodyOnLoadWrapper();">
<form name="aspnetForm" method="post" action="../_layouts/error.aspx" id="aspnetForm" onsubmit="return _spFormOnSubmitWrapper();">
<input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKLTU2NjkxODU3M2RkLuL1ujv9xB7yocvKanNE0G4cIn0=" />
<TABLE class="ms-main" CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%" HEIGHT="100%">
<tr><td>
<table CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%">
<tr>
<td colspan=4 class="ms-globalbreadcrumb" align="right">
<a href="javascript:TopHelpButtonClick('NavBarHelpHome')" id="ctl00_PlaceHolderGlobalNavigation_TopHelpLink" AccessKey="6" title="Help (new window)"><img src="/_layouts/images/helpicon.gif" align="absmiddle" border="0" alt="Help (new window)" /></a>
</td>
</tr>
</table>
</td></tr>
<tr>
<td class="ms-globalTitleArea">
<table width=100% cellpadding=0 cellspacing=0 border=0>
<tr>
<td id="GlobalTitleAreaImage" class="ms-titleimagearea"><img id="onetidHeadbnnr0" src="/_layouts/images/titlegraphic.gif" alt="" /></td>
<td class="ms-sitetitle" width=100%>


</td>
<td style="padding-top:8px;" valign=top>


</td>
</tr>
</table>
</td>
</tr>
<TR>
<TD id="onetIdTopNavBarContainer" WIDTH=100% class="ms-bannerContainer">


</TD>
</TR>





<TR height="100%"><TD><TABLE width="100%" height="100%" cellspacing="0" cellpadding="0">
<tr>
<td class="ms-titlearealeft" id="TitleAreaImageCell" valign="middle" nowrap><div style="height:100%" class="ms-titleareaframe"></div></td>
<td class="ms-titleareaframe" id="TitleAreaFrameClass">

<table cellpadding=0 height=100% width=100% cellspacing=0>
<tr><td class="ms-areaseparatorleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=1 alt=""></td></tr>
</table>

</td>
<td valign=top id="onetidPageTitleAreaFrame" class='ms-areaseparator' nowrap width="100%">
<table id="onetidPageTitleAreaTable" cellpadding=0 cellspacing=0 width=100% border="0">
<tr>
<td valign="top" class="ms-titlearea">

<a href="http://btp8nmb03" id="ctl00_PlaceHolderTitleBreadcrumb_idSimpleGoBackToHome">Go back to site</a>

</td>
</tr>
<tr>
<td height=100% valign=top ID=onetidPageTitle class="ms-pagetitle">
<h2 class="ms-pagetitle">

Error
</h2>
</td>
</tr>
</table>
</td>
<td class="ms-titlearearight">


<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</tr>
<TR>
<TD class="ms-leftareacell" valign=top height=100% id="LeftNavigationAreaCell">
<table class=ms-nav width=100% height=100% cellpadding=0 cellspacing=0>
<tr>
<td>
<TABLE height="100%" class=ms-navframe CELLPADDING=0 CELLSPACING=0 border="0">
<tr valign="top">
<td width="4px"><IMG SRC="/_layouts/images/blank.gif" width=4 height=1 alt=""></td>
<td valign="top" width="100%">







</td>
</tr>
<tr><td colspan=2><IMG SRC="/_layouts/images/blank.gif" width=138 height=1 alt=""></td></tr>
</TABLE>
</td>
<td></td>
</tr>
</table>
</TD>
<td>
<div class='ms-areaseparatorleft'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
<td class='ms-formareaframe' valign="top">
<TABLE width="100%" border="0" cellspacing="0" cellpadding="0" class="ms-propertysheet">
<TR valign="top" >
<TD class="ms-descriptiontext" width="100%">

</TD>
<TD ID=onetidYPadding width="10px"><IMG SRC="/_layouts/images/blank.gif" width=10 height=1 alt=""></TD>
</TR>
<TR >
<TD ID=onetidMainBodyPadding height="8px"><IMG SRC="/_layouts/images/blank.gif" width=1 height=8 alt=""></TD>
</TR>
<tr>
<td valign="top" height="100%">
<A name="mainContent"></A>

<table width=100% border=0 class="ms-titleareaframe" cellpadding=0>
<TR>
<TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span>
<P><span class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span>

</span>
</TD>
</TR>
</table>
<script type="text/javascript" language="JavaScript">
var gearPage = document.getElementById('GearPage');
if(null != gearPage)
{
gearPage.parentNode.removeChild(gearPage);
document.title = "Error";
}
</script>
</td>
</tr>
</table>
</td>
<td class="ms-rightareacell">
<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</TR>
<tr>
<td class="ms-pagebottommarginleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-bodyareapagemargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommarginright"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
</tr>
</TABLE></TD></TR>
</TABLE>


<input type="text" name="__spDummyText1" style="display:none;" size=1/>
<input type="text" name="__spDummyText2" style="display:none;" size=1/>
</form>

</BODY>
</HTML>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

2. When I try to connect to the Report Manager. I get the error "The request failed with HTTP status 400: Bad Request."

The log file contains the following information:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>India Standard Time</TimeZone>
<Path>D:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__05_20_2008_20_12_13.log</Path>
<SystemName>BTP8NMB03</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: The request failed with HTTP status 400: Bad Request.
w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The request failed with HTTP status 400: Bad Request.
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!5/20/2008-20:12:18:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: The request failed with HTTP status 400: Bad Request.
w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The request failed with HTTP status 400: Bad Request.
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!7!5/20/2008-20:12:27:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: The request failed with HTTP status 400: Bad Request.
w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The request failed with HTTP status 400: Bad Request.
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!5/20/2008-20:25:19:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Any help in this regard would be appreciated.
Thanks in advance.

Thx,
Datta

View 4 Replies View Related

Reporting Services: Report Manager Does Not Load (server Error)

Aug 8, 2007

Hello Everyone,

I have installed SQL Server 2005 with Reporting Services on Windows Server 2003. I can run through reporting services configuration and completed all the required steps to initialize it. I can access the reports through //localhost/reportserver and I can also access the reports through Microsoft CRM. But I cannot access the Report Manager (//localhost/reports). I get this Error:
Server Error in '/Reports' Application.


Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.

Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'ReportingServicesWebServer' could not be loaded.





WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].

Stack Trace:





[FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
System.Reflection.Assembly.Load(String assemblyString) +25
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32

[ConfigurationErrorsException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +70
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3561465
System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462

[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +521

[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3540923
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +69
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +275











Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

Any ideas? I have done some searching, but could not find any viable solutions. Please Help

Regards,
Ray

View 1 Replies View Related

Reporting Services :: In SSRS Report IIF Condition With Value 0 Was Displaying As Error

Sep 22, 2015

I am having 3 columns like A,B,C. In the C column I am having calculations like 

=CInt(IIf(B=0,100,((A-B)/B)*100))

After this calculation if the column B is 0(zero) corresponding C column get display as "#Error",  if B is not having 0 every thing is working fine.

In the calculation if I remove the " /B" it is working fine. So, how to display the value 100 in C if B=0.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved