Error While Check For User

Jun 5, 2008

my aspnetdb.mdf can,t created  my remote connection settings in sql server is ok

and i get this folwing error :

 

 
An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

SQLExpress database file auto-creation error:



The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:


If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.



Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:





[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +1093
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +351
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +90
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +115
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122
System.Data.SqlClient.SqlConnection.Open() +227
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +110

[HttpException (0x80004005): Unable to connect to SQL Server database.]
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +181
System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) +167
System.Web.Management.SqlServices.Install(String database, String dbFileName, String connectionString) +46
System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) +681

View 1 Replies


ADVERTISEMENT

Where Can I Check The User License In MS SQL 7?

Aug 1, 2001

dear all,
i need yours expertise to help me find out the number of user license in the Ms SQL 7. beside that, can i increase the number of user license manually.
Thank.

regards dennis

View 1 Replies View Related

User/Role Check

Jun 5, 2000

Can anyone out there help me write a sp to determine if a user has a certain role?

I'm trying to use "sp_helpuser @UserName".

Can I declare a cursor with "EXEC sp_helpuser @UserName"? I'm not having success with this.

What about SELECT [GroupName] FROM EXEC sp_helpuser @UserName WHERE [GroupName] = @GroupName? Again, syntax error.

Is there already a better way that someone knows of?

View 1 Replies View Related

How To Check User Accessibility.

May 21, 2008

hi
i want when user connect to sql server and wants to do some works via my app, before doing nothing, check accessibility of user whether he/she can access that object or not, but i don't know which sp or function or view is useful for this work,can anyBody help me ?
thanks

View 6 Replies View Related

Check User Authorization

Jun 16, 2008

I need to write a sp (for my web app) that checks user authorization. Here is the scenario:

User Authorization Table (AuthTable)

UserIDFrom Cost CenterTo Cost Center
(UserId)(FromCC)(ToCC)

User130003600
User148005120
User152005250
User230003400
User237603840


Production Table (ProdTable) data:

Job NumberCost CenterQuantity
(JobId)(JobCC)JobQty

51002860250
51003120525
51004801262
52003001155
52005251276

I need to check the user security for each record that I read from the ProdTable against all entries in the AuthTable for the current user.

When I read the ProdTable and User ID = User1 then selected records should be:

5100/3120, 5100/4801, 5200/3001,

When I read the ProdTable and UserID = User2, then the selected records should be:

5200/3120

I’m not sure how to construct my sql statement. Can somebody give me a hand? Thank you.

View 1 Replies View Related

Check User When Using Enterprise Manager

Aug 5, 1999

Hi all,

When I use Administrator to login the NT, I can use the Enterprise Manager.
If I don't logout the NT, any users can easy to use the Enterprise Manager too.
I would like to know is there any way to add a security checking to avoid user without
privilege to use the Enterprise Manager?

Thanks

View 1 Replies View Related

Check Constraint User Notification

May 21, 2008

Hi

I've created a check constraint using the dialogue box in SQL Server , which blocks out the insertion of records which do not meet the required the requirements.

Is there a way to be notified when the record has not been inserted?

Thanks

View 1 Replies View Related

Domain User Access Check

Jun 20, 2008

How to find out whether a domain user has access to sql server or not?

Many domain groups have access to my sql server. I need to check whether a user has access to server or not.

Probably I need to check which windows group the user belongs. This looks more like an o/s question than DB. How do you guys manage this scenario?


------------------------
I think, therefore I am - Rene Descartes

View 4 Replies View Related

Check Which Group User Belongs To

Jul 15, 2015

we  do get incidents saying user can't login even adding to the group.So is there any script to check which group the user xxxxx belongs to from SSMS?

View 2 Replies View Related

Check Binding Of A User With A Login

May 21, 2008



Hi,
When i restore a database from a different SQl 2005 instance to another,
i want to check if the logins are same and if the users in the destination db are all binded to the logins.
How can i do that?

Any help?

View 4 Replies View Related

How Check Either One Name Of The User Is Present Or Not In Data Table From C#.net

Jan 31, 2008

hi
 can anyone help me out, i have one issue that is how i have to check while adding new user details to database table weather that user name is exist in that table or not.
for my application i'm using oracle database and C#.Net.
table is g_users and columns are:
 Name                                      Null?    Type ----------------------------------------- -------- ---------------------------- USERID                                    NOT NULL VARCHAR2(5) NAME                                               VARCHAR2(20) EMPID                                              VARCHAR2(5) USERNAME                                  NOT NULL VARCHAR2(30) MOBILE                                             NUMBER(12) EMAILID                                            VARCHAR2(20) DOMAIN                                    NOT NULL VARCHAR2(30)
i need to check from c# programming before inserting a new row into table weather username is already exists are not. how to check this one?

View 5 Replies View Related

Script To Check The History Of User Logs

Jun 13, 2008

Hi there,

I was wondering if anyone knows how to do it.
We have a couple of servers, each of which hosts tons of databases.
I am trying to write a script to check whoever has logged into any database within the past week, for example (not just the current users). I have tried 'sp_who' and 'sp_who2' but they are not meeting my needs.

Appreciated!!

View 2 Replies View Related

Please Help! How Can I Check The Current User Against A Specific Database?

Apr 29, 2008

In my application (infopath browser forms), First I get current user name thru System.Environment.UserName, after that, i want to check whether this user has access (read & write) permission to certain database, How do I do that?
One way I tried before is to get all the users and stored the names in an array for comparing in my program, but can not figure out the SQL command (to get the database users), if there it is, please kindly tell me.
Or if I can just pass the current user to check?
Thanks in advance.

View 5 Replies View Related

Check If A Windows/nt User Account Exists

Oct 26, 2006

I have some script which creates/grant priveleges to windows/nt users to DB but i frequently get the message below:

Windows NT user or group '<user or group>' not found. Check the name again.

I understand that this is because the said user/group is indeed not present in the environment I'm running the script (ie. testing and production environment).

But is it possible to have some sort of checking whether the user/group exists in the environment so that I could determine whether or not to call some lines of code?

Not sure if this is possible so i had to ask. c",)

View 7 Replies View Related

Transact SQL :: How To Check If Current User Has Sysadmin Privs

May 27, 2015

Is there a simple command that can be executed to check if the current user has sysadmin privs?  I just want to check to see if I have sysadmin privs and if so then execute a command, if not do nothing in .Net code.  I just want to do this check once and set a variable in the .net code.

View 4 Replies View Related

Check User Supplied Date Range Is In Between Startdate And Enddate?

May 3, 2012

I need query which will check user supplied date range is in between the existing table startdate and enddate.

if any of the date of user supplied date range is in between the tables start date and end date,it should retrun that record from table.

for example user supply date range is from 1 may 2012 to 5 may 2012.

then query must check that

1 may 2005
2 may 2005
3 may 2005
4 may 2005
5 may 2005

(all dates) is in between startdate and enddate of existing table.

View 2 Replies View Related

Sql2005 Express 'windows NT User Or Group Not Found. Check The Name Again.

Feb 26, 2006

I have installed visual studio 2005 with sql express. My tutorial book asked me to do the following to be able to use sql.

sqlcmd -S mycomputernameSQLExpress -E

which worked and then I get

1>

where I am to put in

1> sp_grantlogin [mycomputernamemyusername]

2> go

after this i get the error.

Msg 15401, Level 11, State 1, Server mycomputernameSQLEXPRESS, Procedure sp_grantlogin, Line 49

Windows NT user or group 'mycomputernamemyusername' not found. Check the name again.

I used Local System for the user name as that is what I think I am seeing as the right user account.

Help?

View 4 Replies View Related

SQL Server Admin 2014 :: User Database Integrity Check Fail

Mar 8, 2015

I've been running the Ola Hallengren maintenance script for the last five months without missing a beat. Today I find an error stating the UserDatabase Integrity check job failed last night. This is running on SQL Server 2014 BI edition w/64 Gigs.

I ran a DBCC CHECKDB on each database manually and all worked until I tried it on the biggest one that is about 18 gbs. It just keeps running and I eventually stopped it so I'm guessing it is memory, but doesn't make sense considering it has 64 gbs. I have it set to 64/4 max / min. Again, this was never an issue until last night.I've been looking up all morning, but not seeing much on this error "The operating system returned error 1453"?

View 5 Replies View Related

Urgent : DB-Library Error 10007: General SQL Server Error: Check Messages From The SQL

Jul 20, 2005

DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh

View 1 Replies View Related

[JavaScript Error] Cannot Delete User Or User's Authority In Specific Report After Install SQL SP2

Jan 23, 2007

 Hi,

I have several reports for users to view on our Intranet. After installation of SQL 2005 SP2 patch, I cannot delete user or user's authority from Report in Properties Tab. An error message was shown on the status bar. It indicated that JavaScript Error: 'Return' statement outside of function. Seems something wrong with the 'Delete' funciton in SQL 2005 after update. The other functions worked fine. Could you point me out how to fix it or need to install any updates / hotfix. Thanks a lot!

Regards,

Kenneth Lai
Programmer


Error Pic


Message Box

 

View 1 Replies View Related

Error Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Feb 18, 2008

All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode.  I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
 
Server Error in '/SendItNow' Application.


 Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:



Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb    Line: 43 Stack Trace:



[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746



Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

View 2 Replies View Related

Is There A Way To Show A User-friendly Error When User Did Not Select A Required Parameter ?

Apr 9, 2007

Hi all,



I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.



In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?



Thanks

Bernard

View 4 Replies View Related

[298] SQLServer Error: 18452, Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Mar 11, 2008

I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.

I logged this set of messages in SQL AgentServer error log:


Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)

Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]

Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '<server>' failed (ConnAttemptCachableOp)

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 17806, Severity: 20, State: 2.

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 18452, Severity: 14, State: 1.

Any help in explaining this would be greatly appreciated.

View 8 Replies View Related

Problm Setting Up User. Error: User Is Null

Jul 20, 2005

On MS-SQL 2k I have a created user. Security for the SQL instance isset to mixed.When I attempt to connect to SQL using Enterprise client on anothermachine on the local network using Windows Auth I get the error: DBName-Login Failed for user ('null')- Reason: Not associated with atrusted SQL Server Connection.What am I over looking?TIA

View 1 Replies View Related

Error : Cannot Open User Default Database. Login Failed. Login Failed For User 'server/user'

Nov 22, 2007



i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.

then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:


"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"


even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.

why ?

View 3 Replies View Related

Reporting Services :: Check Access Fails To Grant Access To Report Item For Current User

Sep 10, 2015

Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:

1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt

ssrs2014

View 7 Replies View Related

How We Can Check Our Sql Is Error Free Or Not

Oct 25, 2007

ls_SQL = ls_SQL + " WHERE "
+ "Convert(varchar(10),"
+ dataSet1.Tables["Model_Criteria"].Rows[i]["table_name"].ToString() + '.'
+ dataSet1.Tables["Model_Criteria"].Rows[i]["column_name"].ToString() + ")"
+ " " + dataSet1.Tables["Model_Criteria"].Rows[i]["relational_operator"].ToString() + " "+ '''
+ ls_Value+ '''+ " "
+ dataSet1.Tables["Model_Criteria"].Rows[i]["logical_operator"].ToString() + " ";
I stored this sql in a string and i want to check whether this string is error free or not (syntax).
how i can do it. Please help it's urgent. 

View 10 Replies View Related

Please Check This Replication Error..

Jul 6, 2004

I tried to replicate between SVRPOS01 and SVRPOS02.
SVRPOS01 is publisher and distributor.
Replication is Merge replication.
But, after snapshot agent ran, the following error comes out and merge agent doesn't do merge replication.
When configure replication I choose option initialize schema.., and in SVRPOS02 I just create empty DB.
Most of time this works... but not in this time..
SVRPOS02 doesn't have data replicated...
Please reply any idea of following error, and solution if you have any..
Thank you.


<Error message>
The schema script '\SVRPOS01C$Program FilesMicrosoft SQL ServerMSSQLReplDatauncSVRPOS01_POS_POSPublicat ion20040706003309v_Item_Old_232.sch' could not be propagated to the subscriber.


<Error Detail>
The schema script '\SVRPOS01C$Program FilesMicrosoft SQL ServerMSSQLReplDatauncSVRPOS01_POS_POSPublicat ion20040706003309v_Item_Old_232.sch' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
Unable to replicate a view or function because the referenced objects or columns are not present on the Subscriber.
(Source: SVRPOS02 (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
Invalid object name 'POSLOC.dbo.BARCODE_MATCH'.
(Source: SVRPOS02 (Data source); Error number: 208)
---------------------------------------------------------------------------------------------------------------

View 2 Replies View Related

Error Check Tool

Jul 24, 2007

We have a report where we do a whole bunch of calculations.

Sometimes we get #div0 err,when you try to divide a number by 0, or NaN Error, when you are trying to divide 0 in the numerator.. Is there a tool, that can sopt check these errors on a report in reporting services, and generate a log that we can check daily for errs?Pl advise

View 6 Replies View Related

Check This With It Is Giving An Error.

Feb 29, 2008



WITH ProccessedYesNO AS

(

select ClaimNumber, Surname, FirstName, CASE WHEN New= 0 THEN 'Yes' ELSE 'No' END AS Processed

from EntryTable)
Select * from ProcessedYesNo Where Ignore_dupe='Yes';



why I am getting an syntex error I check the query it is ok atleast the inner query is running but when I apply the with
than I am getting Syntax error near 'WITH'

View 12 Replies View Related

Error Validating Any Check Constraint

Aug 19, 2006

Hey Guys,



I just this day started using SQL sever 2005. I created a database and
then created a table. Then I started adding some fields. I wanted to
add a check constraint to one of the fields called state but I keep
getting the same error. I right click on the field while editing the
table and select check constraint. I then click add on the check
constraint dialogue and in the expression caption I input the
following:



<code>

@State In('CA', 'AZ', 'UT', 'CO')

</code>


I am using a book and have straight copied the above example from
the book. However when I input the check constraint I get the following
error;



"Error validating constraint 'ck_myfirstdatabase'


I have tried this with other fields and other types of check
constraints and I still get the same error. I have tried to delete the
database and recreate it. I have tried everything I can think of and I
cannot seem to get check constraints to work. I have no idea why I keep
getting this message. I have checked the
examples a
thousand times, the syntax is definately correct. This is getting
extremely annoying as I cannot continue unless I do this. I'm all out
of ideas. Can anyone please tell me
why it could not be working? Any ideas would be greatly appreciated.

View 1 Replies View Related

DB Design :: Check Constraint Error

May 29, 2015

I ran the below INSERT COMMAND and it resulted into the following error message.You can also see the table structure below.Those are the only two tables that reference the Artist table.

SET IDENTITY_INSERT dbo.ARTIST ON
INSERT INTO ARTIST
(ArtistID,LastName,FirstName,Nationality,DateOfBirth,DateDeceased)
VALUES(1, 'Miro', 'Joan', 'Spanish', 1893, 1983);

[code]....

View 5 Replies View Related

Check Filetype And Move To Error

Sep 24, 2007



Hi,


I am using a foreach file to loop through a folder and pick a file. Then populate a Sql table.


Now I want to check if the file is a mdb and then check if the mdb contains a table called "Schools". If any of these conditions fails, the file should be moved to the Error folder. If conditions pass, populate the Sql tables.


How do I do this? Please specify the components to use.


thanks

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved