Full message:
Connection handshake failed. An OS call failed: (8009030c) 0x8009030c(The logon attempt failed). State 66
Under these conditions, setting trustworthy on on the sending and receiving databases will solve this issue
1) Communicating between multiple instances
2) Using Kerberos security (NT Authentication, i.e. not certificates)
Hello,
I am unable to send a message to a target service on a different SQL Server instance. Using the SQL Profiler, I get the following error from the target machine:
Broker::Connection: Connection handshake failed: An OS call failed: (80090326) 0x80090326(The message received was unexpected or badly formatted.). State 106.
On the initiator side, the transmission_status shows the following error:
An error occurred while receiving data: '64(The specified network name is no longer available.)'.
Any ideas on why the target thinks the message is "unexpected or badly formatted"? Btw, I am specifying the default message type and contract for the services.
Thanks.
Hi.
I created two instances of SQL Server Dev Edition on the same machine.
The two instances acted as the sender / receiver.
However, when the message is transmitted from "Sender" to "Receiver", the following errors are
displayed in "SQL Profiler".
「Connection handshake failed. There is no compatible authentication protocol. State 21.�
How should be dealt with with this?
My best regards.
piknik
When try to run report, I receive this message:€œLogon failed.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
We just have Reporting Services server (2005) up and running, my roles are browser, Content Manager, My Reports, Publisher, Report Builder. I was able to deployed the report and set up data source. Connect using credentials supplied by suer running the report, and use as Windows credentails when connecting to the data source checked.
Did a search on but can't find any messages that related to this problem.
Please advise.
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
View 1 Replies View RelatedHi there!
Often discussed, but not really solved in my opinion - the connection between the partners and the witness causes problems.
My case: Three Servers in the same domain, three endpoints on 5022 with windows negotiation, all endpoints can be reached by telnet from each server. Mirrorring works. So far so good.
But one of these partners is not able to connect to the witness. The witness' error log is full with that:
"2006-06-01 13:45:20.32 Logon Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030c) 0x8009030c(Der Anmeldeversuch ist fehlgeschlagen.). State 67.'. [CLIENT: 130.143.205.54]"
My Endpoints are created like
CREATE ENDPOINT [EASYRIS_Mirroring]
AUTHORIZATION [code1dephbrsaa1-sys108]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = SUPPORTED ALGORITHM RC4);
What catches my eyes is that
GRANT CONNECT ON ENDPOINT::EASYRIS_Mirroring TO [code1dephbrsaa1-sys108];
doesn't cause these user to appear in the result set of
SELECT EP.name, SP.STATE,
CONVERT(nvarchar(38), suser_name(SP.grantor_principal_id))
AS GRANTOR,
SP.TYPE AS PERMISSION,
CONVERT(nvarchar(46),suser_name(SP.grantee_principal_id))
AS GRANTEE
FROM sys.server_permissions SP , sys.endpoints EP
WHERE SP.major_id = EP.endpoint_id
ORDER BY Permission,grantor, grantee;
By the way, these mentioned user is sysadmin and grantor.
Has anyone an idea?
Torsten
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
When I configure SSB in two machine to send message, I get a error message in target machine SQLProfiler:
View 13 Replies View RelatedI configured a database mirroring on SQL server 2008 R2 on test environment. However It was not working, after some time. I deleted the mirroring configuration and also deleted database on both primary and mirror instance.
few days later I notices, On Primary, Continuous error events logged with message "database mirroring attempt by user 'domainservice account' failed with error 'connection handshake failed, 'domainservice account' does not have permission on the endpoint state 84.
I want to get rid of this message.
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
I wrote an application using Visual Studio 2005 beta 2 which uses a SQL Express .mdf file, included in the project, for the database. After installing Visual Studio 2005 RC and the SQL Express that comes with it (I followed all of the uninstall instructions first) I can no longer add a SQL Express database to any of my projects, nor can I open the SQL Express database in my original project. When I try either of these tasks, I get the "Failed to generate user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed." I read the thread which dealt with this error, and changed the connection string for the database file that had worked before to User Instance = false. The moment I click Test Connection or OK, I get the error: "An attempt to attach an auto-named database for file C:<path to project>EngSQL.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share." (<path to project> is actually a full path, I didn't want to type the whole thing out. :) ). A search for this error turns up a solution of setting User Instance = false, which puts me in a catch 22 position.
View 80 Replies View RelatedI have come across this error message in ssrs and cannot seem to locate the error. Report manager lets me logon-- I can navigate to the folder but once I click on the actual report I get this error
and suggestions as to why and how to fix it???
Thanks in advance
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException  with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
View 3 Replies View Related
hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.
i attached the profiler with both source and target by including all the service broker event.
in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection
and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.
i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.
bt still getiing the error.
please help!!!!!!!!!!!
I keep getting these alerts but the client's IP listed in the message doesn't seem to be having a problem. I'm not sure if it is retrying and succeeds the second or third try. I commonly get 2 of these messages each time it happens. I thought is may be when the user connects to the server in Management Studio but when I got the message today the user wasn't trying to connect to this server. The server the use was connected to in SSMS is linked to this server but if the link was causing the error it looks like it would return the IP of the server instead of the users IP. The link is done using a SQL login account. Anyway, this is not a big problem since know body except me even knows it is happening but I'd like to figure it out.
SQL Server Alert System: 'Fatal Error in Current Process' occurred on
DESCRIPTION: SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed.
Hi all,
I am trying to run eight SSIS packs from within Integration Services > Stored Packages > File System and seem to get an error like the following on all of them:
"Failed to acquire connection "MyConnection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I can run the packages without error from within VS and from within that location in Integration Services on the machine containing the the databases, but when I attempt to run them remotely I get that error. I am attempting this with full admin access on both machines, but the purpose behind these packages is for our developers to run them on individual databases whenever they need to. So I'm concerned that I may run into further access errors after this, but so far I can't find a reason why this connection would fail. Any ideas?
If I can supply more information please let me know. Thanks in advance for any information!
Hi,
I am using SQL Server 2005. I got the following error in event viewer. Tried to search info from web failed. Does anyone have idea? Thanks a lot :)
[Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI handshake failed with error code 0x80090308 while establishing a connection with integrated security; the connection has been closed. [CLIENT: 202.40.9.176]
My developers are getting a "Failed to retrieve data for this request error" in SQL Server Management Studio. When I look in the SQL Server logs there are two errors logged:
Source Logon
Message
Error: 17806, Severity: 20, State: 2.
Source Logon
Message
SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed. [CLIENT: IP Address]
I can€™t seem to find any information about these errors. Any ideas?
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:Â Â Â Â Â Â
11/22/2010 12:19:57 PM
Â
DESCRIPTION:Â SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.Â
Â
COMMENT:Â Â Â Â Â Â
(None)
JOB RUN:Â Â Â Â Â Â Â Â Â Â Â
(None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
Â
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
Hi,
I am using SQL Server 2005. I got the following error in event viewer. I tried to search on web the solution but failed. Does anyone have idea on that? Many thanks :)
Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI
handshake failed with error code 0x80090308 while establishing a
connection with integrated security; the connection has been closed.
[CLIENT: 202.40.9.176]
Im trying to login to sql from an external client but I keep getting these messages
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
SSPI handshake failed with error code 0x80090302 while establishing a connection with integrated security; the connection has been closed. [CLIENT: xxxx]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: xxxx]
This only happens when the SQL server has these policies applied:
Policy
Setting
Network security: Do not store LAN Manager hash value on next password change
Enabled
Network security: LAN Manager authentication level
Send LM & NTLM - use NTLMv2 session security if negotiated
Network security: LDAP client signing requirements
Negotiate signing
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
I do not have the choice to switch to mixed mode authentication on the sql and these policy settings are a security policy requirement for me.
regards
duh123
Sir i am trying to connect sql from my LAN to my networked computers but whenever i tried to register it through Enterprise manager i get following "SQL Server registration failed because of the conection failure displayed below.Do you wish to Register anyway? Login failed for user 'SW17/Guest'
where SW17/ is my another computer name...
i have checked tcp and named pipes
and confirm username for sql authentication too
please help me as i being late submit my project
I am running the Sept CTP. I have created a SSIS package that pulls data from a text file and inserts into a database. When I run the package on the DB server it runs fine. I have moved the package the the web server (we are attempting to kick off the package from a web site) and we get connections errors. We are running the package using dtexec from the command line.
View 7 Replies View RelatedHi,
I am writing a web application in c# that is attempting to get the parameters from a report on a Reporting Services 2005 server.
I am using the following code:
SQLReportViewer.ServerReport.ReportServerCredentials = new ReportCredentials(UserName, UserPassword, UserDomain); SQLReportViewer.ServerReport.ReportPath = Rpt.FileName; SQLReportViewer.ServerReport.ReportServerUrl = new Uri(ServerUrl); Parameters = SQLReportViewer.ServerReport.GetParameters();
The Getparameters Line causes the following exception:
Microsoft.Reporting.WebForms.ReportServerException was unhandled by user code Message="Logon failed. (rsLogonFailed)" Source="Microsoft.ReportViewer.WebForms" ErrorCode="rsLogonFailed" StackTrace: at Microsoft.Reporting.WebForms.ServerReport.get_Service() at Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WebForms.ServerReport.GetParameters()
The UserName, UserPassword and UserDomain variables are all populated with correct data, as is Rpt.FileName.
The ReportCredentials class is a very simple implementation of the ICredentials interface - Code shown here:
-->
public class ReportCredentials : IReportServerCredentials { protected string _UserName, _Password, _Domain; public ReportCredentials(string UserName, string Password, string Domain) { _UserName = UserName; _Password = Password; _Domain = Domain; } //***************************************************************** public bool GetFormsCredentials (out System.Net.Cookie AuthCookie, out string UserName, out string Password, out string Authority) { UserName = _UserName; Password = _Password; Authority = _Domain; AuthCookie = null; return (true); } //***************************************************************** public System.Security.Principal.WindowsIdentity ImpersonationUser { get { return (null); } } //***************************************************************** public ICredentials NetworkCredentials { get{ return (new NetworkCredential(_UserName, _Password, _Domain)); } }
<--
I can use the same credentials to retrieve a list of reports from the report server (the report I am trying to access is in that list) and to log on directly by going to the URL of Reporting Services.
This is made more frustrating by the complete lack of detail in the error message, as it does not say why the logon failed, or give me a single clue about what is going on.
Has anyone seen this before and can tell me how to fix it, or is there something stupid in my code?
Thankyou.
Paul
Hi there!
Well this problem it's really driving me nuts!!!
I am using a CrystalReportViewer on a windows application which has an embedded report document...
The report (and the application too) is connected to an SQL Express server which is installed on an MS Small Bussines Server.
The server and the terminal PCs are under the same domain.
The app works flawlessly on the terminals, but when I open the form which contains the report I get prompted for logon to the SQL.. I have tried everything but it refuses to connect and i get a msg box : Logon failed.Please try again.
The sql surface area and the database have been configured to accept remote connections and mixed mode authentication (otherwise my app dosen't run at all), i have created sysadmin users(on the SQL), i have turned off the firewall but it is still refuses to connect.
I would like to mention that I have tested my app on my domain and SBS (I am not sure which version of SQL Server is installed) and I have used the develpment machine for the test. The logon is successful, even with the same account which the application connects (i mean the account included in the connection string)
Any ideas????
I appreciate your time,
thank you very much in advance...
Hi all,
I'm new to SSRS. I installed reporting services with my other services in SQL Server 2005. When I started Reporting Service Configuration tool,I see that my Reporting Server Status Stopped. When i am trying to start the service, i get the following error(exception)....also attached are the logfiles....
EXCEPTION DETAILS:
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
LOGFILE1:
-----------------------
------------------------------
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Sql error:System.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
ReportingServicesService!library!8!3/6/2008-20:26:48:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!8!3/6/2008-20:26:48:: Attempting to start service again...
LOGFILE2:
------------
--------------------
ReportingServicesService!library!4!3/6/2008-20:26:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
ReportingServicesService!servicecontroller!9!3/6/2008-20:26:47:: Total Physical memory: 1063641088
ReportingServicesService!servicecontroller!4!3/6/2008-20:26:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized.
at Microsoft.ReportingServices.Library.Native.NameToSid(String name)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
The IIS Version I'm using is 5.1
Hi Guys,
I am working on MS Reporting Services...
This is the error I get
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.
The following is the code(Its an aspx code).
<rsweb:ReportViewer ID ="SummarReportViewer" runat="server" Height ="760px" Width="1076px" ProcessingMode="Remote" ShowParameterPrompts="False">
<ServerReport ReportPath="/Pages/Report.aspx?ItemPath=/TestForecastReports/SummaryReport"
ReportServerUrl="http://ricsqltest2/Reports
" />
</rsweb:ReportViewer >
I am able to access the report when I hit @ http://ricsqltest2/Reports /Pages/Report.aspx?ItemPath=/TestForecastReports/SummaryReport
I also changed the code in C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportManagerRSWebApplication.COnfig to
<Configuration>
<UI>
<ReportServerUrl>http://ricsqltest2/Reports</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
<ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
</UI>
****
****
****
</Configuration>
Can any One plz help me out.
Thanks & Regards,
Mansoor.
I have RS running on Standard server 2003 I receive the follow when trying to access the main page.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version
I can view reports from the location below just not view the main page.
servername/ReportServer
works fine
included error log file
01/02/07 18:10:34, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 2364
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x4747EC40
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: D:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesSQLDmpr0001.mdmp
01/02/07 18:10:34, ACTION, ReportingServicesService.exe, Watson Invoke: No
Please help anyone.
Thanks Alan
.
Hi All,
My Report Server works find but after apply SQL Server 2005 Service Pack2. I can't connect to ReportServer Database. When Trying to connect from SQL Server Management Studio i get following Page.
TITLE: Connect to Server
------------------------------
Cannot connect to VISTA.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.3054.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsReportServerDatabaseLogonFailed&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.3054.00" target="_blank">Get Online Help</a></li><ul>
<li>For more information about this error navigate to the report server on the local server machine, or enable remote errors</li>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</ul>
</body>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
Colud anyone help me to resolve this issue please???
Thank you very much.
Regards,
Balwant Patel
I used an sql server logon to create the view and model in designer, I deployed the source and model from desigen, when I go to report builder I get this message:
View 7 Replies View Relatedi tried to set up mirroring having only principal and mirror. mirroring endpoints were easily created for both servers. when i try to add the partner name it responds with
Msg 1418, Level 16, State 1, Line 1The server network address "TCP://machine1.domain.com:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
On the log of machine1 i see,
Database Mirroring login attempt by user 'NT AUTHORITYANONYMOUS LOGON.' failed with error: 'Connection handshake failed. The login 'NT AUTHORITYANONYMOUS LOGON' does not have CONNECT permission on the endpoint. State 84.'.
i have similar problems as in
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1020144&SiteID=1
i am a sysadmin on both SQL Servers and have connect permission on both end points.
Both the endpoints are in started state and listening to all IP's
Both services are as 'Local System'
As per what was mentioned in the above post to add a 'domain/machine$' user did not help.
Tried using setspn.exe to add a new SPN MSSQLsvc/<HOST>:<MIRRORINGPORT> did not work. an ERROR comes 'not enough privileges'
setup shows the following SPN only on both
HOST/Machine name
HOST/Machine name.Domin.com
MSSQLSvc/Machine name.Domin.com:1433
SMTPSVC/Machine name
SMTPSVC/machine name.Domain.com
and on second machine
HOST/Machine name
HOST/Machine name.Domin.com
MSSQLSvc/Machine name.Domin.com:1433
any Clues?
When I am trying to connect my database using SQL Server Authentication option, then its showing error: "An attempt to login suing sql authentication failed. Server is configured only for Windows authentication only."
View 8 Replies View RelatedI'm trying to set up a SQL Alert to run when a Failed login error is generated. For whatever reason, I can't seem to get this working. I have it set up to run on error 18456 (Failed login), I have the server set to log failed login attempts and I can see the entry in the log file, but the alert never occurs. Basically, I want a way to detect when someone is trying to hack into my database using a brute force approach.
View 8 Replies View Related