HELP!!! - Internal Error. Buffer Provided To Read Column Value Is Too Small.
This is the situation... I have a table PST_AVM partitioned by SRC_SYS_ID. It has data in three of the partition and constraints and index on it... Now, this is what I do that causes SQL Server generated and error. Here are the steps:
1. Drop all constraints and indexes on PST_AVM
2. Truncate partition for a given SRC_SYS_ID within PST_AVM table.
3. Load data for the same SRC_SYS_ID into PST_AVM
At this point the table gets corrupted. I can do the following:
select src_sys_id, count(*) from pst_avm
group by src_sys_id
I get the right results but I run a query with a single column like:
select vendor from pst_avm
I get rows back but the result set is not column 'vendor' is the data in the column left of 'vendor'. Finally, when I do a Select * then I get the this error back:
Msg 682, Level 22, State 146, Line 1
Internal error. Buffer provided to read column value is too small. Run DBCC CHECKDB to check for any corruption.
When I run DBCC CHECKDB, I get a bunch of these errors:
Msg 2537, Level 16, State 21, Line 1
Table error: object ID 1204199340, index ID 0, partition ID 72057594231128064, alloc unit ID 72057594217234432 (type In-row data), page (1:256753), row 4. The record check (off-row data retrieval) failed. The values are 0 and 0.
View Complete Forum Thread with Replies
Related Forum Messages:
Synchronization Error:The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.
Hello: I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as €œThe buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) €?. The SQL database file size is 120MB. I create the .sdf file on PDA with the following C# code: string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;"; SqlCeEngine engine = new SqlCeEngine(connString); engine.CreateDatabase(); I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out. Moreover, the synchronization always stops at the same table. Please help and a lot of thanks in advance.
View Replies !
SQL 2005 Mobile Edition Error: The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.
I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile. I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition". The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors." My question is 2 part. First, what is causing this error, and second, how can it be resolved?
View Replies !
Character String Buffer Too Small
I’m running into a problem when I try to convert some of our clob fields to character strings to display on a Powebuilder report. I’m using the function dbms_lob to convert, as in: Select dbms_lob.substr(d.notes,32767,1) from myreport d 32,767 is the maximum string size this function can handle, and the sql statement is crashing with a “character string buffer too small” error when it encounters a really big report. How can I get around this?
View Replies !
[Flat File Source [8885]] Error: The Column Data For Column &&"CountryId&&" Overflowed The Disk I/O Buffer.
Hi everyone, I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow. So basically what i want is to control the anormal ending of the csv file. please can anyone help me ??? I am getting the following error after replacing the '""' with '|'. The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun". [Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer. [Flat File Source [8885]] Error: An error occurred while skipping data rows. [DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. [DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038. [DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039. [DTS.Pipeline] Information: Post Execute phase is beginning. apprecite for immediate response. Thanks in advance, Anand
View Replies !
DTS Error: Data For Source Column 2 (‘column_name) Is Too Large For The Specified Buffer Size.
Hi, I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field. Unfortunately, I’m getting the following error message: Error at Source for Row number 30. Errors encountered so far in this task: 1. Data for source column 2 (‘Html’) is too large for the specified buffer size. I also get this error message when attempting to import the same data from Excel. Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0. This modification did not help. Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1. This change only resulted in the same error message, but with the row number indicated as “Row number 1�. (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem). You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field. Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)? I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!
View Replies !
Error: The Buffer Manager Failed To Create A New Buffer Type
Hi I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data. There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.". SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ). I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log. Does any one have any idea what happened? TIA . . . Ed
View Replies !
How To Remove Partially Duplicate Rows From Select Query's Result Set (DB Schema Provided And Query Provided).
Hi, Please help me with an SQL Query that fetches all the records from the three tables but a unique record for each forum and topicid with the maximum lastpostdate. I have to bind the result to a GridView.Please provide separate solutions for SqlServer2000/2005. I have three tables namely – Forums,Topics and Threads in SQL Server2000 (scripts for table creation and insertion of test data given at the end). Now, I have formulated a query as below :- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate ORDER BY t.topicid ASC,th.lastpostdate DESC Whose result set is as below:- forumid topicid name author lastpostdate NoOfThreads 1 1 Java Overall x@y.com 2008-01-27 14:48:53.000 2 1 1 Java Overall a@b.com 2008-01-27 14:44:29.000 2 1 2 JSP NULL NULL 0 1 3 EJB NULL NULL 0 1 4 Swings p@q.com 2008-01-27 15:12:51.000 1 1 5 AWT NULL NULL 0 1 6 Web Services NULL NULL 0 1 7 JMS NULL NULL 0 1 8 XML,HTML NULL NULL 0 1 9 Javascript NULL NULL 0 2 10 Oracle NULL NULL 0 2 11 Sql Server NULL NULL 0 2 12 MySQL NULL NULL 0 3 13 CSS NULL NULL 0 3 14 FLASH/DHTLML NULL NULL 0 4 15 Best Practices NULL NULL 0 4 16 Longue NULL NULL 0 5 17 General NULL NULL 0 On modifying the query to:- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate HAVING th.lastpostdate=(select max(lastpostdate)from threads where topicid=t.topicid) ORDER BY t.topicid ASC,th.lastpostdate DESC I get the result set as below:- forumid topicid name author lastpostdate NoOfThreads 1 1 Java Overall x@y.com 2008-01-27 14:48:53.000 2 1 4 Swings p@q.com 2008-01-27 15:12:51.000 1 I want the result set as follows:- forumid topicid name author lastpostdate NoOfThreads 1 1 Java Overall x@y.com 2008-01-27 14:48:53.000 2 1 2 JSP NULL NULL 0 1 3 EJB NULL NULL 0 1 4 Swings p@q.com 2008-01-27 15:12:51.000 1 1 5 AWT NULL NULL 0 1 6 Web Services NULL NULL 0 1 7 JMS NULL NULL 0 1 8 XML,HTML NULL NULL 0 1 9 Javascript NULL NULL 0 2 10 Oracle NULL NULL 0 2 11 Sql Server NULL NULL 0 2 12 MySQL NULL NULL 0 3 13 CSS NULL NULL 0 3 14 FLASH/DHTLML NULL NULL 0 4 15 Best Practices NULL NULL 0 4 16 Longue NULL NULL 0 5 17 General NULL NULL 0 I want all the rows from the Forums,Topics and Threads table and the row with the maximum date (the last post date of the thread) as shown above. The scripts for creating the tables and inserting test data is as follows in an already created database:- if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Topics__forumid__79A81403]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Topics] DROP CONSTRAINT FK__Topics__forumid__79A81403 GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Threads__topicid__7C8480AE]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Threads] DROP CONSTRAINT FK__Threads__topicid__7C8480AE GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Forums]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Forums] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Threads]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Threads] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Topics]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Topics] GO CREATE TABLE [dbo].[Forums] ( [forumid] [int] IDENTITY (1, 1) NOT NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Threads] ( [threadid] [int] IDENTITY (1, 1) NOT NULL , [topicid] [int] NOT NULL , [subject] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [replies] [int] NOT NULL , [author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [lastpostdate] [datetime] NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Topics] ( [topicid] [int] IDENTITY (1, 1) NOT NULL , [forumid] [int] NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ) ON [PRIMARY] GO ALTER TABLE [dbo].[Forums] ADD PRIMARY KEY CLUSTERED ( [forumid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD PRIMARY KEY CLUSTERED ( [threadid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Topics] ADD PRIMARY KEY CLUSTERED ( [topicid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD FOREIGN KEY ( [topicid] ) REFERENCES [dbo].[Topics] ( [topicid] ) GO ALTER TABLE [dbo].[Topics] ADD FOREIGN KEY ( [forumid] ) REFERENCES [dbo].[Forums] ( [forumid] ) GO ------------------------------------------------------ insert into forums(name,description) values('Developers','Developers Forum'); insert into forums(name,description) values('Database','Database Forum'); insert into forums(name,description) values('Desginers','Designers Forum'); insert into forums(name,description) values('Architects','Architects Forum'); insert into forums(name,description) values('General','General Forum'); insert into topics(forumid,name,description) values(1,'Java Overall','Topic Java Overall'); insert into topics(forumid,name,description) values(1,'JSP','Topic JSP'); insert into topics(forumid,name,description) values(1,'EJB','Topic Enterprise Java Beans'); insert into topics(forumid,name,description) values(1,'Swings','Topic Swings'); insert into topics(forumid,name,description) values(1,'AWT','Topic AWT'); insert into topics(forumid,name,description) values(1,'Web Services','Topic Web Services'); insert into topics(forumid,name,description) values(1,'JMS','Topic JMS'); insert into topics(forumid,name,description) values(1,'XML,HTML','XML/HTML'); insert into topics(forumid,name,description) values(1,'Javascript','Javascript'); insert into topics(forumid,name,description) values(2,'Oracle','Topic Oracle'); insert into topics(forumid,name,description) values(2,'Sql Server','Sql Server'); insert into topics(forumid,name,description) values(2,'MySQL','Topic MySQL'); insert into topics(forumid,name,description) values(3,'CSS','Topic CSS'); insert into topics(forumid,name,description) values(3,'FLASH/DHTLML','Topic FLASH/DHTLML'); insert into topics(forumid,name,description) values(4,'Best Practices','Best Practices'); insert into topics(forumid,name,description) values(4,'Longue','Longue'); insert into topics(forumid,name,description) values(5,'General','General Discussion'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'About Java Tutorial',2,'a@b.com','1/27/2008 02:44:29 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'Java Basics',0,'x@y.com','1/27/2008 02:48:53 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (4,'Swings',0,'p@q.com','1/27/2008 03:12:51 PM');
View Replies !
Internal Error / Internal Catalog Exception
Hi, I've read already every thread in this forum regarding this topic with no results. SQLServer and the corresponding services are at actual update level. The reporting services worked for 4 months without this problem. Suddenly, most of the time all reports return an internal error (it is like 70-30 for internal error) not depending which render format is used. The system logs (eventlog, iis) show no errors. The ExecutionLog of RS show rsInternalError. Looking in the log files in RS log directory, there is following stacktrace: w3wp!processing!1!05/11/2007-10:40:06:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Boolean isLinkedReport, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) I don't see any hint in stack trace, Maybe one of yours. As it seems, after an iisreset the first rendering always works perfect. HD space is enough. Any ideas?
View Replies !
Merge Replication Error: 'Failure To Connect To SQL Server With Provided Connection
Hi!I´m trying to create a merge replication publication for a SQL MobileApplication .Everything works fine creating the publication and I'm able to dothehttp://xxx.xxx.xxx.xxx/aaaaaaa/sqlcesa30.dll, and it display's the"sql server mobile server agent 3.0".But when I run the application on the PDA and it´s doing thereplication it appears the following error:'Failure to connect to SQL Server with provided connectioninformation . SQL Server does not exist , access is denied becausetheIIS user is not a valid user on the SQL Server , or the password isincorrect' .any idea of which could be the reason...?Thanks in advance!!!
View Replies !
Getting This Warning [Excel Source 1 [12717]] Error: A Destination Table Name Has Not Been Provided.
Hello, I am getting this warning message,when I am trying to load an excel file to a table [Excel Source 1 [12717]] Error: A destination table name has not been provided. These are the steps I am performing EXCEL source | Data Conversion | OLEDB Destination In the EXcel Source I have the Data Access Mode as Table Name or View Name variable Am I missing something.. I tried to give a default value in the variable and then I am getting this warning Error at Data Flow Task [Excel Source 1 [12717]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. Error at Data Flow Task [Excel Source 1 [12717]]: Opening a rowset for "Order" failed. Check that the object exists in the database. Any help is really appreciated. Thank You.
View Replies !
Small Date/time Column
I have a smalldatetime column. When I did SELECT * INTO MY_TABLE FROM YOUR_TABLE WHERE CONVERT(VARCHAR(12), DATE_ENTERED, 101) > '01/01/2001' rows from 1998, 1999 came over. Ideas ! Thanks, John
View Replies !
Column Overflowed The Disk I/O Buffer
Hi everyone, I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow. So basically what i want is to control the anormal ending of the csv file. please can anyone help me ??? [DTS.Pipeline] Error: Column Data for Column "Client" overflowed the disk I/O buffer [DTS.Pipeline] Error: The PrimeOutput method on component "Client Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. [DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038. [DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039. [DTS.Pipeline] Information: Post Execute phase is beginning. Thanks a lot J
View Replies !
The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
I am getting the following error on my SSIS package. It runs a large amount of script components, and processes hundred of thousands of rows. The exact error is: The value is too large to fit in the column data area of the buffer. I redirect the error rows to another table. When I run just those records individually they import without error, but when run with the group of 270,000 other records it fails with that error. Can anyone point me to the cause of this issue, how to resolve, etc. Thanks.
View Replies !
Value Is Too Large To Fit In Column Data Area Of The Buffer
When executing the Script Task, I get the error shown here: http://www.webfound.net/buffer.jpg I'm not sure how to resolve this. http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.dts.pipeline.buffercolumn(SQL.90).aspx http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.dts.pipeline.buffercolumn.maxlength(SQL.90).aspx how do I change the maxlength of the buffer...if, that is the problem here?
View Replies !
The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
Can someone tell me how to access the MaxLength property of a data column so I can figure out where the problem is? Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer) Try Row.PrimaryDiagnosis = Mid(Row.DiagnosisCode, 1, 8) Catch ex As Exception Row.Comments = "Error copying DiagnosisCode: <" + Row.DiagnosisCode + ">. " + ex.Message End Try Output = <aaaaa > Thanks, Laurence
View Replies !
The Value Is Too Large To Fit In The Column Data Area Of The Buffer?
I have a variable nvarchar(1000) that I ma reading into the buffer of a data flow task in the script component script task. It gives me this error: "Script component exception.........The value is too large to fit in the column data area of the buffer." I looked at the BufferColumn members and tried to set the maxlength to 1500. But it does not help. What is the solution?
View Replies !
Custom Dataflow Component---add New Column To Buffer
This is trivial I'm sure but I'll be dogged if I can find someone who mentions how to do it. I am attempting to develop a Data Flow Transformation that appends a new column (a string value) into the current stream. I have found plenty of references on how to replace an existing column but I'd really like to just add my new column in there. It doesn't need to be configurable, it can be a static column name. I'll take a solution that allows the column name to be set at design time, don't get me wrong but the magic I'm looking for is how to implement a new column in a stream. Yes, I am well aware of the derived column task but I will be replacing a few hundred instances and I'd much rather just drag an item onto the designer than to drag a derived column, double click it, type in the column name, set the expression and then set the datatype, etc. Anyone spare a moment to enlighten me? Pardon the lack of formatting, this BB doesn't play with Opera (I know, I'm a heretic) using System; using System.Collections; using System.Runtime.InteropServices; using Microsoft.SqlServer.Dts.Pipeline; using Microsoft.SqlServer.Dts.Pipeline.Wrapper; using Microsoft.SqlServer.Dts.Runtime.Wrapper; using Microsoft.SqlServer.Dts.Runtime; namespace Microsoft.Samples.SqlServer.Dts { [ DtsPipelineComponent ( DisplayName = "Nii", Description = "This is the component that says Nii.", ComponentType = ComponentType.Transform ) ] public class Nii : PipelineComponent { public override void ProcessInput(int inputID, PipelineBuffer buffer) { if (!buffer.EndOfRowset) { while (buffer.NextRow()) { try { // do something here to } catch (Exception e) { ComponentMetaData.FireInformation(0, ComponentMetaData.Name, "There was an error on row " + buffer.CurrentRow.ToString() + ". The error is: " + e.Message + " : " + e.Source + " : " + e.StackTrace, "", 0, ref fireEventAgain); } } } } }
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details. RsInternal Error)
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)" Then we went to Report Server, Reporting Service and SQL Server service are all are running fine. Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help. We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error? Please help.
View Replies !
Data For Source Column Is Too Large For The Specified Buffer Size...
Hello there,I have and small excel file, which when I try to import into SQlServer will give an error "Data for source column 4 is too large forthe specified buffer size"I have four columns in the excel file, one of the column contains alarge chunk of data so I created a table in SQL Server and changed thetype of the field to text so I could accomodate this field but stillno luck.Any suggestions as to how to go about this.Thanks in advance,Srikanth pai
View Replies !
Data For Source Column 3('Col3') Is Too Large For The Specified Buffer Size.
Hi, I have a problem to import xls file to sql table, using MS SQL 2000 server. Actual main problem associated with it is xls file contain one colum having large amount of text which length is approximate 1500 characters. I am trying to resolve it through like save xls to csv or text file then import but it also can not copy whole text of that column, like any column in xls having 995 characters then text or csv file contain 560 characater. So, it is also wrong. thanks in advance, if any try to resolve
View Replies !
Script Component As Source: The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
In my quest to get the Script Component as Source to work, I've come upon an error that says "The value is too large to fit in the column data area of the buffer.". Of course, I went through the futile attempt to get debugging to work. After struggling and more searching, I found that I need to run Dts.Events.FireProgress to debug in a Script Component. However, despite the fact that the script says: Code Block Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper Imports Microsoft.SqlServer.Dts.Runtime.Wrapper Imports Microsoft.SqlServer.Dts.Runtime ... Dts.Events.FireProgress.. I get a new error saying: Error 30451: Name 'Dts' is not declared. Its like I am using the wrong namespace, but all documentation indicates that Microsoft.SqlServer.Dts.Pipeline.Wrapper is the correct namespace. I understand that I can use System.Windows.Form.MessageBox.Show, but iterating through 100 items makes this too cumbersome. Any idea what I may be missing now? Thanks, John T
View Replies !
Error: Value Does Not Fall Within The Expected Range. Error In Buffer.DirectRow Method
Hi I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output. When i run the task it fails with this error ( I am putting the whole SSIS message) SSIS package "Package.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID) at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID) at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket) Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057. Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows. Task failed: Data Flow Task Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "Package.dtsx" finished: Failure. ---------------------------- This is my piece of code which is trying to put the data in the output buffer (ProcessInput function). int GoodOutputId = -1; IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID); //GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex); GoodOutputId = ComponentMetaData.OutputCollection[0].ID; System.Console.Write("Here i am"); System.Console.Write(GoodOutputId); if (!buffer.EndOfRowset) { while (buffer.NextRow()) { if (_inputColumnInfos.Length == 0) { buffer.DirectRow(GoodOutputId); } else { buffer.DirectRow(GoodOutputId); } } } I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it. Please let me know if i have missed something. Thanks in advance. Vipul
View Replies !
Error: SQL Server Internal Error. Text Manager Cannot Continue With Current Statement..
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log: SQL Server Internal Error. Text manager cannot continue with current statement. The server is running SQL Server 2000 with SP4. I am really concerned because this is a production sever and there are over 300 users access concurrently. Please help me to find a solution. Thanks, Roshan.
View Replies !
SQL Reporting - An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)
I have created an RDL file programatically. When I execute the code I get the error as mentioned below: Error: Sub report cannot be shown. An internal error occurred on the report server. See the error log for more details. (rsInternalError) When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result. Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer. Any Suggestion/feedback is highly appreciated. Thank You. The code of the sample RDL is shown below: <?xml version="1.0" encoding="utf-8"?> <Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner"> <DataSources> <DataSource Name="DataSource1"> <DataSourceReference>DataSource1</DataSourceReference> <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID> </DataSource> </DataSources> <BottomMargin>0.25in</BottomMargin> <RightMargin>0.25in</RightMargin> <PageWidth>11in</PageWidth> <ReportParameters> <ReportParameter Name="machine_id"> <DataType>String</DataType> <Prompt>machine_id</Prompt> </ReportParameter> <ReportParameter Name="from_date"> <DataType>String</DataType> <AllowBlank>true</AllowBlank> <Prompt>From Date</Prompt> </ReportParameter> <ReportParameter Name="to_date"> <DataType>String</DataType> <AllowBlank>true</AllowBlank> <Prompt>To Date</Prompt> </ReportParameter> </ReportParameters> <rd:DrawGrid>true</rd:DrawGrid> <InteractiveWidth>8.5in</InteractiveWidth> <rd:SnapToGrid>true</rd:SnapToGrid> <Body> <ReportItems> <Table Name="table1"> <DataSetName>Main_Report</DataSetName> <TableGroups> <TableGroup> <Header> <TableRows> <TableRow> <TableCells> <TableCell> <ReportItems> <Textbox Name="textbox2"> <rd:DefaultName>textbox2</rd:DefaultName> <ZIndex>1</ZIndex> <Style> <TextAlign>Left</TextAlign> <PaddingLeft>2pt</PaddingLeft> <PaddingBottom>2pt</PaddingBottom> <PaddingRight>2pt</PaddingRight> <PaddingTop>2pt</PaddingTop> </Style> <CanGrow>true</CanGrow> <Value>=Fields!syscode.Value</Value> </Textbox> </ReportItems> </TableCell> </TableCells> <Height>0.25in</Height> </TableRow> </TableRows> <RepeatOnNewPage>true</RepeatOnNewPage> </Header> <Grouping Name="table1_Group1"> <PageBreakAtEnd>true</PageBreakAtEnd> <GroupExpressions> <GroupExpression>=Fields!syscode.Value</GroupExpression> </GroupExpressions> </Grouping> </TableGroup> </TableGroups> <Details> <TableRows> <TableRow> <TableCells> <TableCell> <ReportItems> <Subreport Name="subreport1"> <Parameters> <Parameter Name="machine_id"> <Value>=Fields!machine_ip.Value</Value> </Parameter> <Parameter Name="syscode"> <Value>=Fields!syscode.Value</Value> </Parameter> <Parameter Name="from_date"> <Value>=Parameters!from_date.Value</Value> </Parameter> <Parameter Name="to_date"> <Value>=Parameters!to_date.Value</Value> </Parameter> </Parameters> <ReportName>Holding_Summary_Multi_Period</ReportName> </Subreport> </ReportItems> </TableCell> </TableCells> <Height>0.25in</Height> </TableRow> </TableRows> </Details> <TableColumns> <TableColumn> <Width>10.5in</Width> </TableColumn> </TableColumns> <Height>0.5in</Height> </Table> </ReportItems> <Height>0.75in</Height> </Body> <rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID> <LeftMargin>0.25in</LeftMargin> <DataSets> <DataSet Name="Main_Report"> <Query> <rd:UseGenericDesigner>true</rd:UseGenericDesigner> <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list where machine_ip = @machine_id</CommandText> <QueryParameters> <QueryParameter Name="@machine_id"> <Value>=Parameters!machine_id.Value</Value> </QueryParameter> </QueryParameters> <DataSourceName>DataSource1</DataSourceName> </Query> <Fields> <Field Name="syscode"> <rd:TypeName>System.Int64</rd:TypeName> <DataField>syscode</DataField> </Field> <Field Name="display_name"> <rd:TypeName>System.String</rd:TypeName> <DataField>display_name</DataField> </Field> <Field Name="customer_syscode"> <rd:TypeName>System.Int64</rd:TypeName> <DataField>customer_syscode</DataField> </Field> <Field Name="account_syscode"> <rd:TypeName>System.Int64</rd:TypeName> <DataField>account_syscode</DataField> </Field> <Field Name="machine_ip"> <rd:TypeName>System.String</rd:TypeName> <DataField>machine_ip</DataField> </Field> </Fields> </DataSet> </DataSets> <Code>Shared offset As Integer Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer If reset offset = pagenumber - 1 End If Return pagenumber - offset End Function </Code> <Width>10.5in</Width> <InteractiveHeight>11in</InteractiveHeight> <Language>en-US</Language> <PageFooter> <ReportItems> <Image Name="image1"> <Sizing>Fit</Sizing> <Left>8.875in</Left> <MIMEType /> <Width>1.5in</Width> <Source>External</Source> <Style /> <Value>bottom_right_logo.gif</Value> </Image> </ReportItems> <Height>0.5in</Height> <PrintOnLastPage>true</PrintOnLastPage> <PrintOnFirstPage>true</PrintOnFirstPage> </PageFooter> <TopMargin>0.5in</TopMargin> <PageHeight>8.5in</PageHeight> </Report>
View Replies !
SQL Server 2005 Error 8630: Internal Query Processor Error
I have a SProc that runs across many clients without any problems. Every now and then, though, I get the following error: Internal Query Processor Error: The query processor encountered an unexpected error during execution. [SQLSTATE 42000] (Error 8630). All I am doing is populating Temp tables with some data and then joining them together to create a Global Temp table that is being BCP'd to a network share. Has anyone come across this error in SQL Server 2005? I cannot find anything on Google or Microcsoft. Thanks, Robert
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)
Hello everybody, I am trying to use the reporting services on Windows 2003 with SQLServer 2005. Everything works fine in the report manager and I can access and render the reports without any problem. But when I try to access the reports directly with the URL from the ReportServer, I get the following error : Reporting Services Error An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found SQL Server Reporting Services So I went to see the error log, and here is what it says : <Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Standard Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__11_10_2006_13_43_22.log</Path> <SystemName>VODAFONE</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!webserver!5!11/10/2006-13:43:23:: i INFO: Reporting Web Server started w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Reporting Services starting SKU: Enterprise w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Evaluation copy: 0 days left w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!library!5!10/11/2006-13:43:23:: Unhandled exception was caught: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded() at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance() at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport() at Microsoft.Reporting.WebForms.ReportViewer..ctor() at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor() at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm() at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl) at ASP.pages_reportviewer_aspx.FrameworkInitialize() at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) w3wp!library!5!10/11/2006-13:43:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded() at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance() at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport() at Microsoft.Reporting.WebForms.ReportViewer..ctor() at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor() at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm() at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl) at ASP.pages_reportviewer_aspx.FrameworkInitialize() at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) --- End of inner exception stack trace --- w3wp!library!5!10/11/2006-13:43:25:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!library!5!10/11/2006-13:43:26:: i INFO: Catalog SQL Server Edition = Enterprise w3wp!webserver!5!11/10/2006-13:43:34:: i INFO: Reporting Web Server stopped Does anyone have any idea about what happends ? Any suggestions maybe about anything I should try ? Thanks very much in advance. [edit] I just installed a few minutes ago the service pack 1 for SQL Server 2005 and Reporting services, but obviously it doesn't change anything to my problem. [/edit]
View Replies !
Internal Error: An Unexpected Error Occurred In Analysis Services Processing
Hi There, I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this? Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed. Thanks Vivek
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details. (rsInternalError)
An internal error occurred on the report server. See the error log for more details. (rsInternalError) - This is the error I get when I try to edit a subcription then click finish.Where do I start in solving this?, heres the log -<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Daylight Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__06_14_2007_12_02_20.log</Path> <SystemName>MCSCITRIX</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file. w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: HTTP status code --> 200 -------Details-------- System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.SqlServer.ReportingServices2005.RSConnection.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.UI.DataDrivenSubscription.Save() at Microsoft.ReportingServices.UI.DataDrivenPropertiesControl.Buttons_FinishClick(Object sender, EventArgs args) at Microsoft.ReportingServices.UI.WizardButtons.OnFinishedClicked(EventArgs args) at Microsoft.ReportingServices.UI.WizardButtons.FinishButton_Click(Object sender, EventArgs args) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: HTTP status code --> 200 -------Details--------
View Replies !
Warning - Kept Reference To Buffer - What Can Be Done About These Buffer Warnings?
Good day everyone, I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it? Here's the warning: "A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned." Thanks, Langston
View Replies !
SQL Server 7 Error 8630 - Internal Query Processor Error
Has anyone come across error 8630 "Internal Query Processor Error: The query processor encountered an unexpected error during execution." with SQL Server 7 with SP4 installed? There are microsoft articles on the error, but the errors are suposidly fixed in SQL Server 7 SP2 and SP3. We are selecting from one view left outer joined with another, but no unions are involved. This is not a problem in SQL Server 2000, but unfortunatlely Microsoft are supporting SQL Server 7 until 2005 and so we have to do the same...
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details.
Hi, We have a RS2005 SP2 installed on a SBS2003 R2 server and we're getting quite frequently (but very randomly) the following error when accessing reports: An internal error occurred on the report server. See the error log for more details. We have searched the internet and found a lot of similar cases. We have installed the suggested MS hotfix 2153 but we still get the same error. The symptoms and error logs look exactly the same as in this post: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=307844&SiteID=1 Btw, it looks like Microsoft is aware of the error - we found the following article on Connect: http://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=251046 Did anyone get this resolved? Thanks, Tomas
View Replies !
Internal Error Occur On Report Server, See Error Lo For More Details
Hai friends, I was created report with 9 sub reports , with multiple column driildown for based on client requirement, iam displying the correct data and in database server data is availabel between 11/01/2007 to 11/30/2007, iam applying the input parameters are begin date, end date, region(defaultly ALL), Department(defaulty ALL), site(defaulty ALL). my problem is while selecting the default dates (minum and maximum dateranges) with selecting ALL regions, ALL departments, ALL sites iam not getting the output. it showing error like " An error occur on local report processing, an internal error occur on report server, see error log for more details" but iam selecting the date as 11/01/2007 to 11/02/2007( that is not large records, between two dates only) it shows correct output. while applying the default ranges that is 11/01/2007 to 11/30/2007 report shows above mentioned error. problem with 9 sub reports ? or any thying please help me how to solve my problem next coming two days i have to deploy my report to client, at the time it will show data between default date ranges. Help me thanks in advance JACKS V
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details.
Well, I get the elusive error... An internal error occurred on the report server. See the error log for more details. I was trying to preview my report and this keeps coming up. I go to the logfiles to see what may be the issue and there are no errors in the log files(s). Can someone let me know what the usual path or name of the error log this is supposed to write to. much appreciated, Clint
View Replies !
An Internal Error Occurred On The Report Server. See The Error Log For More Details.
I have rs2005 installed. I created some reports through SQL Server Business Intelligence Development Studio. I can preview reports fine in the studio. But after deploying it, on //localhost/reports, when I click the report, it takes a while to calculate and then give me error: "An internal error occurred on the report server. See the error log for more details. " The weird thing is if I restart report service, it will display report fine on the first time, then fail on the following attempts. Here is what's in the log file SQLDUMPER_ERRORLOG.log 03/20/06 16:48:18, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514) 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 3808 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x000000004740E608 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL> 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000000000000 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000000000000 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL> 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL> 03/20/06 16:48:18, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL> 03/20/06 16:48:20, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used 03/20/06 16:48:20, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0038.mdmp 03/20/06 16:48:20, ACTION, w3wp.exe, Watson Invoke: No 03/20/06 16:49:09, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514) 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 3808 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x00000000086E2CF8 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL> 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000000000000 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000000000000 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL> 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL> 03/20/06 16:49:09, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL> 03/20/06 16:49:12, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used 03/20/06 16:49:12, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0039.mdmp 03/20/06 16:49:12, ACTION, w3wp.exe, Watson Invoke: No 03/20/06 16:49:46, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514) 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 3808 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x00000000086E4128 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL> 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000000000000 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000000000000 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL> 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL> 03/20/06 16:49:46, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL> 03/20/06 16:49:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used 03/20/06 16:49:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0040.mdmp 03/20/06 16:49:48, ACTION, w3wp.exe, Watson Invoke: No Here is what is in SQL Dumpr0040.log: <Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>Pacific Standard Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__03_20_2006_16_48_01.log</Path> <SystemName>MSI-SQL01</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!webserver!1!3/20/2006-16:48:02:: i INFO: Reporting Web Server started w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!resourceutilities!1!3/20/2006-16:48:02:: i INFO: Reporting Services starting SKU: Enterprise w3wp!resourceutilities!1!3/20/2006-16:48:02:: i INFO: Evaluation copy: 0 days left w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!library!1!03/20/2006-16:48:05:: i INFO: Call to GetPermissions:/ w3wp!library!1!03/20/2006-16:48:05:: i INFO: Catalog SQL Server Edition = Enterprise w3wp!library!5!03/20/2006-16:48:05:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:08:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:48:09:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:10:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Withdraw w3wp!library!1!03/20/2006-16:48:10:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:12:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Withdraw' ) w3wp!library!1!03/20/2006-16:48:13:: Using folder C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesRSTempFiles for temporary files. w3wp!webserver!1!03/20/2006-16:48:15:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Withdraw', Stream='' w3wp!library!5!03/20/2006-16:48:17:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:48:17:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Withdraw w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Withdraw' ) w3wp!processing!1!03/20/2006-16:48:18:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) w3wp!library!1!03/20/2006-16:48:18:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. w3wp!library!1!03/20/2006-16:48:20:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!webserver!1!03/20/2006-16:48:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.UpdateTimingInformation(RunningJobContext jobContext, Int64 totalDurationMs, Int64 reportDataRetrievalDurationMs, Int64 reportRenderingDurationMs) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) at Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() w3wp!library!1!03/20/2006-16:48:24:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!1!03/20/2006-16:48:24:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Enrollment w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!webserver!1!03/20/2006-16:48:30:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:37:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:37:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:37:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:38:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:38:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:38:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:38:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:38:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:38:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:39:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!processing!5!03/20/2006-16:48:39:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) Microsoft.ReportingServices.Library.RenderSnapshotAction.Render() Microsoft.ReportingServices.Library.RSService.RenderFromSessionNoCache(CatalogItemContext reportContext, ClientRequest session, RenderingResult& result) Microsoft.ReportingServices.Library.RSService.RenderFromSession(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderNext(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effecectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderNextCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderNextCancelableStep.RenderNext(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) w3wp!library!5!03/20/2006-16:48:39:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. w3wp!library!5!03/20/2006-16:49:12:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!webserver!5!03/20/2006-16:49:12:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.UpdateTimingInformation(RunningJobContext jobContext, Int64 totalDurationMs, Int64 reportDataRetrievalDurationMs, Int64 reportRenderingDurationMs) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.Library.RenderSnapshotAction.Render() at Microsoft.ReportingServices.Library.RSService.RenderFromSessionNoCache(CatalogItemContext reportContext, ClientRequest session, RenderingResult& result) at Microsoft.ReportingServices.Library.RSService.RenderFromSession(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderNext(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effecectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderNextCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderNextCancelableStep.RenderNext(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() w3wp!library!5!03/20/2006-16:49:14:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:49:14:: i INFO: Call to GetSystemPermissions w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Change w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to GetSystemPermissions w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Change' ) w3wp!processing!5!03/20/2006-16:49:16:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) w3wp!library!5!03/20/2006-16:49:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.
View Replies !
Sqlcmd: Error: Internal Error At FormatRowset (Reason: Ox80040e4e).
I get this after dumping about 2GB and 885800 rows X 2 columns from a simple query to a file. The command line is simple: sqlcmd -b -h -1 -S "sindb05" -d ACT -E -Q "select date, data from data_strings with (nolock) where date > '2008-01-20 12:00:00' and date < dateadd(hour, +1, '2008-01-20 12:00:00')" -o out.txt How can I work around this error?
View Replies !
An Error Occurred In The Service Broker Internal Activator While Trying To Scan The User Queue '(null)' For Its Status. Error: 2
Hello - can't find any info on this error - can anyone shed some light? There was a deadlock - which preceeded this message by 2 seconds. 04/25/2007 08:20:12,spid108,Unknown,An error occurred in the Service Broker internal activator while trying to scan the user queue '(null)' for its status. Error: 2905<c/> State: 1. 04/25/2007 08:20:12,spid108,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors. 04/25/2007 08:20:12,spid108,Unknown,Stack Signature for the dump is 0x1229B5AA 04/25/2007 08:20:12,spid108,Unknown,78132A36 Module(MSVCR80+00002A36) 04/25/2007 08:20:12,spid108,Unknown,781329AA Module(MSVCR80+000029AA) 04/25/2007 08:20:12,spid108,Unknown,01447720 Module(sqlservr+00447720) 04/25/2007 08:20:12,spid108,Unknown,0144789A Module(sqlservr+0044789A) 04/25/2007 08:20:12,spid108,Unknown,0144859B Module(sqlservr+0044859B) 04/25/2007 08:20:12,spid108,Unknown,01447562 Module(sqlservr+00447562) 04/25/2007 08:20:12,spid108,Unknown,01006DAB Module(sqlservr+00006DAB) 04/25/2007 08:20:12,spid108,Unknown,01006BBC Module(sqlservr+00006BBC) 04/25/2007 08:20:12,spid108,Unknown,01006A96 Module(sqlservr+00006A96) 04/25/2007 08:20:12,spid108,Unknown,0112F65C Module(sqlservr+0012F65C) 04/25/2007 08:20:12,spid108,Unknown,0112F70F Module(sqlservr+0012F70F) 04/25/2007 08:20:12,spid108,Unknown,0112CB04 Module(sqlservr+0012CB04) 04/25/2007 08:20:12,spid108,Unknown,0112D1D1 Module(sqlservr+0012D1D1) 04/25/2007 08:20:12,spid108,Unknown,0112EA61 Module(sqlservr+0012EA61) 04/25/2007 08:20:12,spid108,Unknown,0108A5CB Module(sqlservr+0008A5CB) 04/25/2007 08:20:12,spid108,Unknown,0108A56B Module(sqlservr+0008A56B) 04/25/2007 08:20:12,spid108,Unknown,01060A5A Module(sqlservr+00060A5A) 04/25/2007 08:20:12,spid108,Unknown,01476CB2 Module(sqlservr+00476CB2) 04/25/2007 08:20:12,spid108,Unknown,01476FD3 Module(sqlservr+00476FD3) 04/25/2007 08:20:12,spid108,Unknown,017FA720 Module(sqlservr+007FA720) 04/25/2007 08:20:12,spid108,Unknown,017FAADC Module(sqlservr+007FAADC) 04/25/2007 08:20:12,spid108,Unknown,01796B1B Module(sqlservr+00796B1B) 04/25/2007 08:20:12,spid108,Unknown,01793310 Module(sqlservr+00793310) 04/25/2007 08:20:12,spid108,Unknown,0179438B Module(sqlservr+0079438B) 04/25/2007 08:20:12,spid108,Unknown,* Short Stack Dump 04/25/2007 08:20:12,spid108,Unknown,* ------------------------------------------------------------------------------- 04/25/2007 08:20:12,spid108,Unknown,* ******************************************************************************* 04/25/2007 08:20:12,spid108,Unknown,* SegSs: 00000023: 04/25/2007 08:20:12,spid108,Unknown,* Esp: 1302E584: 13025387 80C87378 80C872F0 00000000 78140001 0009D9C2 04/25/2007 08:20:12,spid108,Unknown,* EFlags: 00010202: 00610067 00650074 0049003B 0076006E 006C0061 00640069 04/25/2007 08:20:12,spid108,Unknown,* SegCs: 0000001B: 04/25/2007 08:20:12,spid108,Unknown,* Ebp: 1302F67C: 1302F788 01793310 13025373 80C872F0 7093AB12 801E8B38 04/25/2007 08:20:12,spid108,Unknown,* Eip: 0179438B: 828B118B 000000E0 C085D0FF 00B9850F 9D890000 FFFFEF8C 04/25/2007 08:20:12,spid108,Unknown,* Edx: 00000E38: 04/25/2007 08:20:12,spid108,Unknown,* Ecx: 00000000: 04/25/2007 08:20:12,spid108,Unknown,* Ebx: 00000000: 04/25/2007 08:20:12,spid108,Unknown,* Eax: A99EE598: 00000000 00000000 A99EE5B0 00000000 00000000 00000000 04/25/2007 08:20:12,spid108,Unknown,* Esi: 00000000: 04/25/2007 08:20:12,spid108,Unknown,* Edi: 80C872F0: 7093AB12 80C87FF0 00000007 B8A20008 7093AB15 00000000 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* dbghelp 14200000 14312FFF 00113000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 76780000 76913FFF 00194000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 764A0000 76633FFF 00194000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 76300000 76493FFF 00194000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 341D0000 343AFFFF 001e0000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 33590000 33764FFF 001d5000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 333F0000 33583FFF 00194000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 14490000 1467AFFF 001eb000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 13D10000 13EFBFFF 001ec000 04/25/2007 08:20:12,spid108,Unknown,* OLEDB32R 13770000 13780FFF 00011000 04/25/2007 08:20:12,spid108,Unknown,* MSDART 133D0000 133E9FFF 0001a000 04/25/2007 08:20:12,spid108,Unknown,* oledb32 13350000 133C8FFF 00079000 04/25/2007 08:20:12,spid108,Unknown,* msxml3 11BD0000 11CE1FFF 00112000 04/25/2007 08:20:12,spid108,Unknown,* msxmlsql 11AF0000 11BC5FFF 000d6000 04/25/2007 08:20:12,spid108,Unknown,* System.Xml 10FA0000 11193FFF 001f4000 04/25/2007 08:20:12,spid108,Unknown,* System.Security 10F20000 10F61FFF 00042000 04/25/2007 08:20:12,spid108,Unknown,* System 10C10000 10EF3FFF 002e4000 04/25/2007 08:20:12,spid108,Unknown,* System.Security.ni 10A90000 10B45FFF 000b6000 04/25/2007 08:20:12,spid108,Unknown,* System.Transactions 0FAD0000 0FB12FFF 00043000 04/25/2007 08:20:12,spid108,Unknown,* System.ni 7A440000 7ABFDFFF 007be000 04/25/2007 08:20:12,spid108,Unknown,* System.Data 102D0000 10596FFF 002c7000 04/25/2007 08:20:12,spid108,Unknown,* mscorjit 0F910000 0F962FFF 00053000 04/25/2007 08:20:12,spid108,Unknown,* SqlAccess 0F8A0000 0F8F5FFF 00056000 04/25/2007 08:20:12,spid108,Unknown,* SensApi 0F880000 0F884FFF 00005000 04/25/2007 08:20:12,spid108,Unknown,* cryptnet 0F680000 0F691FFF 00012000 04/25/2007 08:20:12,spid108,Unknown,* SOFTPUB 0F670000 0F674FFF 00005000 04/25/2007 08:20:12,spid108,Unknown,* mscorsec 0F640000 0F652FFF 00013000 04/25/2007 08:20:12,spid108,Unknown,* mscorlib.ni 0EAC0000 0F5A7FFF 00ae8000 04/25/2007 08:20:12,spid108,Unknown,* mscorwks 080E0000 08640FFF 00561000 04/25/2007 08:20:12,spid108,Unknown,* xplog70 07CA0000 07CA2FFF 00003000 04/25/2007 08:20:12,spid108,Unknown,* xplog70 07C80000 07C8BFFF 0000c000 04/25/2007 08:20:12,spid108,Unknown,* xpstar90 07C50000 07C75FFF 00026000 04/25/2007 08:20:12,spid108,Unknown,* odbcint 07C30000 07C46FFF 00017000 04/25/2007 08:20:12,spid108,Unknown,* ATL80 7C630000 7C64AFFF 0001b000 04/25/2007 08:20:12,spid108,Unknown,* BatchParser90 07A40000 07A5EFFF 0001f000 04/25/2007 08:20:12,spid108,Unknown,* ODBC32 07A00000 07A3CFFF 0003d000 04/25/2007 08:20:12,spid108,Unknown,* SQLSCM90 079E0000 079E8FFF 00009000 04/25/2007 08:20:12,spid108,Unknown,* xpstar90 07980000 079C7FFF 00048000 04/25/2007 08:20:12,spid108,Unknown,* xpsqlbot 07960000 07965FFF 00006000 04/25/2007 08:20:12,spid108,Unknown,* msftepxy 07490000 074A4FFF 00015000 04/25/2007 08:20:12,spid108,Unknown,* SQLNCLIR 007A0000 007D2FFF 00033000 04/25/2007 08:20:12,spid108,Unknown,* comdlg32 762B0000 762F9FFF 0004a000 04/25/2007 08:20:12,spid108,Unknown,* COMCTL32 77530000 775C6FFF 00097000 04/25/2007 08:20:12,spid108,Unknown,* sqlncli 337A0000 339C1FFF 00222000 04/25/2007 08:20:12,spid108,Unknown,* CLBCatQ 777B0000 77832FFF 00083000 04/25/2007 08:20:12,spid108,Unknown,* xpsp2res 10000000 102C4FFF 002c5000 04/25/2007 08:20:12,spid108,Unknown,* ntdsapi 766F0000 76704FFF 00015000 04/25/2007 08:20:12,spid108,Unknown,* wshtcpip 070B0000 070B7FFF 00008000 04/25/2007 08:20:12,spid108,Unknown,* hnetcfg 071F0000 07248FFF 00059000 04/25/2007 08:20:12,spid108,Unknown,* dssenh 070C0000 070E3FFF 00024000 04/25/2007 08:20:12,spid108,Unknown,* imagehlp 76C10000 76C38FFF 00029000 04/25/2007 08:20:12,spid108,Unknown,* WINTRUST 76BB0000 76BDAFFF 0002b000 04/25/2007 08:20:12,spid108,Unknown,* dbghelp 06C10000 06D22FFF 00113000 04/25/2007 08:20:12,spid108,Unknown,* msfte 069B0000 06C08FFF 00259000 04/25/2007 08:20:12,spid108,Unknown,* security 06190000 06193FFF 00004000 04/25/2007 08:20:12,spid108,Unknown,* rasadhlp 76F80000 76F84FFF 00005000 04/25/2007 08:20:12,spid108,Unknown,* winrnr 76F70000 76F76FFF 00007000 04/25/2007 08:20:12,spid108,Unknown,* DNSAPI 76ED0000 76EF8FFF 00029000 04/25/2007 08:20:12,spid108,Unknown,* RESUTILS 05D50000 05D62FFF 00013000 04/25/2007 08:20:12,spid108,Unknown,* CLUSAPI 05D30000 05D41FFF 00012000 04/25/2007 08:20:12,spid108,Unknown,* OLEAUT32 77D00000 77D8BFFF 0008c000 04/25/2007 08:20:12,spid108,Unknown,* WSOCK32 71BB0000 71BB8FFF 00009000 04/25/2007 08:20:12,spid108,Unknown,* VERSION 77B90000 77B97FFF 00008000 04/25/2007 08:20:12,spid108,Unknown,* MTXCLU 05D10000 05D28FFF 00019000 04/25/2007 08:20:12,spid108,Unknown,* msvcp60 780C0000 78120FFF 00061000 04/25/2007 08:20:12,spid108,Unknown,* MSDTCPRX 05C90000 05D07FFF 00078000 04/25/2007 08:20:12,spid108,Unknown,* XOLEHLP 05C80000 05C85FFF 00006000 04/25/2007 08:20:12,spid108,Unknown,* COMRES 77010000 770D5FFF 000c6000 04/25/2007 08:20:12,spid108,Unknown,* schannel 76750000 76776FFF 00027000 04/25/2007 08:20:12,spid108,Unknown,* cryptdll 766E0000 766EBFFF 0000c000 04/25/2007 08:20:12,spid108,Unknown,* kerberos 05BC0000 05C17FFF 00058000 04/25/2007 08:20:12,spid108,Unknown,* iphlpapi 76CF0000 76D09FFF 0001a000 04/25/2007 08:20:12,spid108,Unknown,* msv1_0 76C90000 76CB6FFF 00027000 04/25/2007 08:20:12,spid108,Unknown,* MSCOREE 05950000 05994FFF 00045000 04/25/2007 08:20:12,spid108,Unknown,* AUTHZ 76C40000 76C53FFF 00014000 04/25/2007 08:20:12,spid108,Unknown,* rsaenh 04E90000 04EBEFFF 0002f000 04/25/2007 08:20:12,spid108,Unknown,* WLDAP32 76F10000 76F3DFFF 0002e000 04/25/2007 08:20:12,spid108,Unknown,* SAMLIB 5CCF0000 5CCFEFFF 0000f000 04/25/2007 08:20:12,spid108,Unknown,* ole32 77670000 777A3FFF 00134000 04/25/2007 08:20:12,spid108,Unknown,* NTMARTA 77E00000 77E21FFF 00022000 04/25/2007 08:20:12,spid108,Unknown,* SQLOS 344D0000 344D4FFF 00005000 04/25/2007 08:20:12,spid108,Unknown,* sqlevn70 4F610000 4F7A3FFF 00194000 04/25/2007 08:20:12,spid108,Unknown,* instapi 48060000 48069FFF 0000a000 04/25/2007 08:20:12,spid108,Unknown,* psapi 76B70000 76B7AFFF 0000b000 04/25/2007 08:20:12,spid108,Unknown,* comctl32 77420000 77522FFF 00103000 04/25/2007 08:20:12,spid108,Unknown,* SHLWAPI 77DA0000 77DF1FFF 00052000 04/25/2007 08:20:12,spid108,Unknown,* SHELL32 7C8D0000 7D0D2FFF 00803000 04/25/2007 08:20:12,spid108,Unknown,* NETAPI32 71C40000 71C97FFF 00058000 04/25/2007 08:20:12,spid108,Unknown,* opends60 333E0000 333E6FFF 00007000 04/25/2007 08:20:12,spid108,Unknown,* USERENV 76920000 769E3FFF 000c4000 04/25/2007 08:20:12,spid108,Unknown,* WS2HELP 71BF0000 71BF7FFF 00008000 04/25/2007 08:20:12,spid108,Unknown,* WS2_32 71C00000 71C16FFF 00017000 04/25/2007 08:20:12,spid108,Unknown,* MSWSOCK 71B20000 71B60FFF 00041000 04/25/2007 08:20:12,spid108,Unknown,* Secur32 76F50000 76F62FFF 00013000 04/25/2007 08:20:12,spid108,Unknown,* MSASN1 76190000 761A1FFF 00012000 04/25/2007 08:20:12,spid108,Unknown,* CRYPT32 761B0000 76242FFF 00093000 04/25/2007 08:20:12,spid108,Unknown,* GDI32 77C00000 77C47FFF 00048000 04/25/2007 08:20:12,spid108,Unknown,* USER32 77380000 77411FFF 00092000 04/25/2007 08:20:12,spid108,Unknown,* RPCRT4 77C50000 77CEEFFF 0009f000 04/25/2007 08:20:12,spid108,Unknown,* ADVAPI32 77F50000 77FEBFFF 0009c000 04/25/2007 08:20:12,spid108,Unknown,* MSVCP80 7C420000 7C4A6FFF 00087000 04/25/2007 08:20:12,spid108,Unknown,* msvcrt 77BA0000 77BF9FFF 0005a000 04/25/2007 08:20:12,spid108,Unknown,* MSVCR80 78130000 781CAFFF 0009b000 04/25/2007 08:20:12,spid108,Unknown,* kernel32 77E40000 77F41FFF 00102000 04/25/2007 08:20:12,spid108,Unknown,* ntdll 7C800000 7C8BFFFF 000c0000 04/25/2007 08:20:12,spid108,Unknown,* sqlservr 01000000 02BCEFFF 01bcf000 04/25/2007 08:20:12,spid108,Unknown,* MODULE BASE END SIZE 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* Access Violation occurred reading address 00000000 04/25/2007 08:20:12,spid108,Unknown,* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION 04/25/2007 08:20:12,spid108,Unknown,* Exception Address = 0179438B Module(sqlservr+0079438B) 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* 04/25/07 08:20:12 spid 108 04/25/2007 08:20:12,spid108,Unknown,* BEGIN STACK DUMP: 04/25/2007 08:20:12,spid108,Unknown,* 04/25/2007 08:20:12,spid108,Unknown,* ******************************************************************************* 04/25/2007 08:20:12,spid108,Unknown,SqlDumpExceptionHandler: Process 108 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 04/25/2007 08:20:12,spid108,Unknown,***Stack Dump being sent to D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0007.txt 04/25/2007 08:20:12,spid108,Unknown,Using 'dbghelp.dll' version '4.0.5' 04/25/2007 08:20:12,spid60,Unknown,An error occurred in the Service Broker internal activator while trying to scan the user queue '(null)' for its status. Error: 2905<c/> State: 1. 04/25/2007 08:20:12,spid60,Unknown,External dump process return code 0x20000001.<nl/>External dump process returned no errors. 04/25/2007 08:20:10,spid60,Unknown,Stack Signature for the dump is 0x1229B5AA 04/25/2007 08:20:10,spid60,Unknown,78132A36 Module(MSVCR80+00002A36) 04/25/2007 08:20:10,spid60,Unknown,781329AA Module(MSVCR80+000029AA) 04/25/2007 08:20:10,spid60,Unknown,01447720 Module(sqlservr+00447720) 04/25/2007 08:20:10,spid60,Unknown,0144789A Module(sqlservr+0044789A) 04/25/2007 08:20:10,spid60,Unknown,0144859B Module(sqlservr+0044859B) 04/25/2007 08:20:10,spid60,Unknown,01447562 Module(sqlservr+00447562) 04/25/2007 08:20:10,spid60,Unknown,01006DAB Module(sqlservr+00006DAB) 04/25/2007 08:20:10,spid60,Unknown,01006BBC Module(sqlservr+00006BBC) 04/25/2007 08:20:10,spid60,Unknown,01006A96 Module(sqlservr+00006A96) 04/25/2007 08:20:10,spid60,Unknown,0112F65C Module(sqlservr+0012F65C) 04/25/2007 08:20:10,spid60,Unknown,0112F70F Module(sqlservr+0012F70F) 04/25/2007 08:20:10,spid60,Unknown,0112CB04 Module(sqlservr+0012CB04) 04/25/2007 08:20:10,spid60,Unknown,0112D1D1 Module(sqlservr+0012D1D1) 04/25/2007 08:20:10,spid60,Unknown,0112EA61 Module(sqlservr+0012EA61) 04/25/2007 08:20:10,spid60,Unknown,0108A5CB Module(sqlservr+0008A5CB) 04/25/2007 08:20:10,spid60,Unknown,0108A56B Module(sqlservr+0008A56B) 04/25/2007 08:20:10,spid60,Unknown,01060A5A Module(sqlservr+00060A5A) 04/25/2007 08:20:10,spid60,Unknown,01476CB2 Module(sqlservr+00476CB2) 04/25/2007 08:20:10,spid60,Unknown,01476FD3 Module(sqlservr+00476FD3) 04/25/2007 08:20:10,spid60,Unknown,017FA720 Module(sqlservr+007FA720) 04/25/2007 08:20:10,spid60,Unknown,017FAADC Module(sqlservr+007FAADC) 04/25/2007 08:20:10,spid60,Unknown,01796B1B Module(sqlservr+00796B1B) 04/25/2007 08:20:10,spid60,Unknown,01793310 Module(sqlservr+00793310) 04/25/2007 08:20:10,spid60,Unknown,0179438B Module(sqlservr+0079438B) 04/25/2007 08:20:10,spid60,Unknown,* Short Stack Dump 04/25/2007 08:20:10,spid60,Unknown,* ------------------------------------------------------------------------------- 04/25/2007 08:20:10,spid60,Unknown,* ******************************************************************************* 04/25/2007 08:20:10,spid60,Unknown,* SegSs: 00000023: 04/25/2007 08:20:10,spid60,Unknown,* Esp: 1189E584: 11895387 80C87378 80C872F0 00000000 03E90001 00087C2D 04/25/2007 08:20:10,spid60,Unknown,* EFlags: 00010202: 00610067 00650074 0049003B 0076006E 006C0061 00640069 04/25/2007 08:20:10,spid60,Unknown,* SegCs: 0000001B: 04/25/2007 08:20:10,spid60,Unknown,* Ebp: 1189F67C: 1189F788 01793310 11895373 80C872F0 7093AB12 801E8B38 04/25/2007 08:20:10,spid60,Unknown,* Eip: 0179438B: 828B118B 000000E0 C085D0FF 00B9850F 9D890000 FFFFEF8C 04/25/2007 08:20:10,spid60,Unknown,* Edx: 00000E38: 04/25/2007 08:20:10,spid60,Unknown,* Ecx: 00000000: 04/25/2007 08:20:10,spid60,Unknown,* Ebx: 00000000: 04/25/2007 08:20:10,spid60,Unknown,* Eax: 5ADE8598: 00000000 00000000 5ADE85B0 00000000 00000000 00000000 04/25/2007 08:20:10,spid60,Unknown,* Esi: 00000000: 04/25/2007 08:20:10,spid60,Unknown,* Edi: 80C872F0: 7093AB12 80C87FF0 00000007 B8A20008 7093AB15 00000000 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* dbghelp 14200000 14312FFF 00113000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 76780000 76913FFF 00194000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 764A0000 76633FFF 00194000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 76300000 76493FFF 00194000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 341D0000 343AFFFF 001e0000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 33590000 33764FFF 001d5000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 333F0000 33583FFF 00194000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 14490000 1467AFFF 001eb000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 13D10000 13EFBFFF 001ec000 04/25/2007 08:20:10,spid60,Unknown,* OLEDB32R 13770000 13780FFF 00011000 04/25/2007 08:20:10,spid60,Unknown,* MSDART 133D0000 133E9FFF 0001a000 04/25/2007 08:20:10,spid60,Unknown,* oledb32 13350000 133C8FFF 00079000 04/25/2007 08:20:10,spid60,Unknown,* msxml3 11BD0000 11CE1FFF 00112000 04/25/2007 08:20:10,spid60,Unknown,* msxmlsql 11AF0000 11BC5FFF 000d6000 04/25/2007 08:20:10,spid60,Unknown,* System.Xml 10FA0000 11193FFF 001f4000 04/25/2007 08:20:10,spid60,Unknown,* System.Security 10F20000 10F61FFF 00042000 04/25/2007 08:20:10,spid60,Unknown,* System 10C10000 10EF3FFF 002e4000 04/25/2007 08:20:10,spid60,Unknown,* System.Security.ni 10A90000 10B45FFF 000b6000 04/25/2007 08:20:10,spid60,Unknown,* System.Transactions 0FAD0000 0FB12FFF 00043000 04/25/2007 08:20:10,spid60,Unknown,* System.ni 7A440000 7ABFDFFF 007be000 04/25/2007 08:20:10,spid60,Unknown,* System.Data 102D0000 10596FFF 002c7000 04/25/2007 08:20:10,spid60,Unknown,* mscorjit 0F910000 0F962FFF 00053000 04/25/2007 08:20:10,spid60,Unknown,* SqlAccess 0F8A0000 0F8F5FFF 00056000 04/25/2007 08:20:10,spid60,Unknown,* SensApi 0F880000 0F884FFF 00005000 04/25/2007 08:20:10,spid60,Unknown,* cryptnet 0F680000 0F691FFF 00012000 04/25/2007 08:20:10,spid60,Unknown,* SOFTPUB 0F670000 0F674FFF 00005000 04/25/2007 08:20:10,spid60,Unknown,* mscorsec 0F640000 0F652FFF 00013000 04/25/2007 08:20:10,spid60,Unknown,* mscorlib.ni 0EAC0000 0F5A7FFF 00ae8000 04/25/2007 08:20:10,spid60,Unknown,* mscorwks 080E0000 08640FFF 00561000 04/25/2007 08:20:10,spid60,Unknown,* xplog70 07CA0000 07CA2FFF 00003000 04/25/2007 08:20:10,spid60,Unknown,* xplog70 07C80000 07C8BFFF 0000c000 04/25/2007 08:20:10,spid60,Unknown,* xpstar90 07C50000 07C75FFF 00026000 04/25/2007 08:20:10,spid60,Unknown,* odbcint 07C30000 07C46FFF 00017000 04/25/2007 08:20:10,spid60,Unknown,* ATL80 7C630000 7C64AFFF 0001b000 04/25/2007 08:20:10,spid60,Unknown,* BatchParser90 07A40000 07A5EFFF 0001f000 04/25/2007 08:20:10,spid60,Unknown,* ODBC32 07A00000 07A3CFFF 0003d000 04/25/2007 08:20:10,spid60,Unknown,* SQLSCM90 079E0000 079E8FFF 00009000 04/25/2007 08:20:10,spid60,Unknown,* xpstar90 07980000 079C7FFF 00048000 04/25/2007 08:20:10,spid60,Unknown,* xpsqlbot 07960000 07965FFF 00006000 04/25/2007 08:20:10,spid60,Unknown,* msftepxy 07490000 074A4FFF 00015000 04/25/2007 08:20:10,spid60,Unknown,* SQLNCLIR 007A0000 007D2FFF 00033000 04/25/2007 08:20:10,spid60,Unknown,* comdlg32 762B0000 762F9FFF 0004a000 04/25/2007 08:20:10,spid60,Unknown,* COMCTL32 77530000 775C6FFF 00097000 04/25/2007 08:20:10,spid60,Unknown,* sqlncli 337A0000 339C1FFF 00222000 04/25/2007 08:20:10,spid60,Unknown,* CLBCatQ 777B0000 77832FFF 00083000 04/25/2007 08:20:10,spid60,Unknown,* xpsp2res 10000000 102C4FFF 002c5000 04/25/2007 08:20:10,spid60,Unknown,* ntdsapi 766F0000 76704FFF 00015000 04/25/2007 08:20:10,spid60,Unknown,* wshtcpip 070B0000 070B7FFF 00008000 04/25/2007 08:20:10,spid60,Unknown,* hnetcfg 071F0000 07248FFF 00059000 04/25/2007 08:20:10,spid60,Unknown,* dssenh 070C0000 070E3FFF 00024000 04/25/2007 08:20:10,spid60,Unknown,* imagehlp 76C10000 76C38FFF 00029000 04/25/2007 08:20:10,spid60,Unknown,* WINTRUST 76BB0000 76BDAFFF 0002b000 04/25/2007 08:20:10,spid60,Unknown,* dbghelp 06C10000 06D22FFF 00113000 04/25/2007 08:20:10,spid60,Unknown,* msfte 069B0000 06C08FFF 00259000 04/25/2007 08:20:10,spid60,Unknown,* security 06190000 06193FFF 00004000 04/25/2007 08:20:10,spid60,Unknown,* rasadhlp 76F80000 76F84FFF 00005000 04/25/2007 08:20:10,spid60,Unknown,* winrnr 76F70000 76F76FFF 00007000 04/25/2007 08:20:10,spid60,Unknown,* DNSAPI 76ED0000 76EF8FFF 00029000 04/25/2007 08:20:10,spid60,Unknown,* RESUTILS 05D50000 05D62FFF 00013000 04/25/2007 08:20:10,spid60,Unknown,* CLUSAPI 05D30000 05D41FFF 00012000 04/25/2007 08:20:10,spid60,Unknown,* OLEAUT32 77D00000 77D8BFFF 0008c000 04/25/2007 08:20:10,spid60,Unknown,* WSOCK32 71BB0000 71BB8FFF 00009000 04/25/2007 08:20:10,spid60,Unknown,* VERSION 77B90000 77B97FFF 00008000 04/25/2007 08:20:10,spid60,Unknown,* MTXCLU 05D10000 05D28FFF 00019000 04/25/2007 08:20:10,spid60,Unknown,* msvcp60 780C0000 78120FFF 00061000 04/25/2007 08:20:10,spid60,Unknown,* MSDTCPRX 05C90000 05D07FFF 00078000 04/25/2007 08:20:10,spid60,Unknown,* XOLEHLP 05C80000 05C85FFF 00006000 04/25/2007 08:20:10,spid60,Unknown,* COMRES 77010000 770D5FFF 000c6000 04/25/2007 08:20:10,spid60,Unknown,* schannel 76750000 76776FFF 00027000 04/25/2007 08:20:10,spid60,Unknown,* cryptdll 766E0000 766EBFFF 0000c000 04/25/2007 08:20:10,spid60,Unknown,* kerberos 05BC0000 05C17FFF 00058000 04/25/2007 08:20:10,spid60,Unknown,* iphlpapi 76CF0000 76D09FFF 0001a000 04/25/2007 08:20:10,spid60,Unknown,* msv1_0 76C90000 76CB6FFF 00027000 04/25/2007 08:20:10,spid60,Unknown,* MSCOREE 05950000 05994FFF 00045000 04/25/2007 08:20:10,spid60,Unknown,* AUTHZ 76C40000 76C53FFF 00014000 04/25/2007 08:20:10,spid60,Unknown,* rsaenh 04E90000 04EBEFFF 0002f000 04/25/2007 08:20:10,spid60,Unknown,* WLDAP32 76F10000 76F3DFFF 0002e000 04/25/2007 08:20:10,spid60,Unknown,* SAMLIB 5CCF0000 5CCFEFFF 0000f000 04/25/2007 08:20:10,spid60,Unknown,* ole32 77670000 777A3FFF 00134000 04/25/2007 08:20:10,spid60,Unknown,* NTMARTA 77E00000 77E21FFF 00022000 04/25/2007 08:20:10,spid60,Unknown,* SQLOS 344D0000 344D4FFF 00005000 04/25/2007 08:20:10,spid60,Unknown,* sqlevn70 4F610000 4F7A3FFF 00194000 04/25/2007 08:20:10,spid60,Unknown,* instapi 48060000 48069FFF 0000a000 04/25/2007 08:20:10,spid60,Unknown,* psapi 76B70000 76B7AFFF 0000b000 04/25/2007 08:20:10,spid60,Unknown,* comctl32 77420000 77522FFF 00103000 04/25/2007 08:20:10,spid60,Unknown,* SHLWAPI 77DA0000 77DF1FFF 00052000 04/25/2007 08:20:10,spid60,Unknown,* SHELL32 7C8D0000 7D0D2FFF 00803000 04/25/2007 08:20:10,spid60,Unknown,* NETAPI32 71C40000 71C97FFF 00058000 04/25/2007 08:20:10,spid60,Unknown,* opends60 333E0000 333E6FFF 00007000 04/25/2007 08:20:10,spid60,Unknown,* USERENV 76920000 769E3FFF 000c4000 04/25/2007 08:20:10,spid60,Unknown,* WS2HELP 71BF0000 71BF7FFF 00008000 04/25/2007 08:20:10,spid60,Unknown,* WS2_32 71C00000 71C16FFF 00017000 04/25/2007 08:20:10,spid60,Unknown,* MSWSOCK 71B20000 71B60FFF 00041000 04/25/2007 08:20:10,spid60,Unknown,* Secur32 76F50000 76F62FFF 00013000 04/25/2007 08:20:10,spid60,Unknown,* MSASN1 76190000 761A1FFF 00012000 04/25/2007 08:20:10,spid60,Unknown,* CRYPT32 761B0000 76242FFF 00093000 04/25/2007 08:20:10,spid60,Unknown,* GDI32 77C00000 77C47FFF 00048000 04/25/2007 08:20:10,spid60,Unknown,* USER32 77380000 77411FFF 00092000 04/25/2007 08:20:10,spid60,Unknown,* RPCRT4 77C50000 77CEEFFF 0009f000 04/25/2007 08:20:10,spid60,Unknown,* ADVAPI32 77F50000 77FEBFFF 0009c000 04/25/2007 08:20:10,spid60,Unknown,* MSVCP80 7C420000 7C4A6FFF 00087000 04/25/2007 08:20:10,spid60,Unknown,* msvcrt 77BA0000 77BF9FFF 0005a000 04/25/2007 08:20:10,spid60,Unknown,* MSVCR80 78130000 781CAFFF 0009b000 04/25/2007 08:20:10,spid60,Unknown,* kernel32 77E40000 77F41FFF 00102000 04/25/2007 08:20:10,spid60,Unknown,* ntdll 7C800000 7C8BFFFF 000c0000 04/25/2007 08:20:10,spid60,Unknown,* sqlservr 01000000 02BCEFFF 01bcf000 04/25/2007 08:20:10,spid60,Unknown,* MODULE BASE END SIZE 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* Access Violation occurred reading address 00000000 04/25/2007 08:20:10,spid60,Unknown,* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION 04/25/2007 08:20:10,spid60,Unknown,* Exception Address = 0179438B Module(sqlservr+0079438B) 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* 04/25/07 08:20:10 spid 60 04/25/2007 08:20:10,spid60,Unknown,* BEGIN STACK DUMP: 04/25/2007 08:20:10,spid60,Unknown,* 04/25/2007 08:20:10,spid60,Unknown,* ******************************************************************************* 04/25/2007 08:20:10,spid60,Unknown,SqlDumpExceptionHandler: Process 60 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 04/25/2007 08:20:10,spid60,Unknown,***Stack Dump being sent to D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0006.txt 04/25/2007 08:20:10,spid60,Unknown,Using 'dbghelp.dll' version '4.0.5'
View Replies !
Buffer Error
I have a win98 machine that has a sql program on it that inserts phone data into a sql table for report purpose. just built new sql server and data insertion was fine until we got slammed. when it is busy and it trys to insert a bunch of data we get a "recieved buffer error" on the 98 machine. any ideas why or how to fix this
View Replies !
Internal Error 998
When I launch SQL Profiler from a Client machine, I receive error (Internal Error 998 Reported from Profiler)...Microsoft recommends installing SQL 7 - service pack 1 but this error is occuring on the Client machines as well..The error is written in NT's Event Viewer / Applications...Can anyone provide a fix for this error?
View Replies !
Buffer Error !! NEED HELP FROM SQL GURU
Upon running DTS manually to transfer data from Excel into SQL Server, I get the error: -----------------------------ERROR OUPTUT ------------------------------------ Error at Source for Row number 264. Errors encountered so far in this task: 1. General error -2147217887 (80040E21). Data for source column 3 ('Value') is too large for the specified buffer size. ---------------------------END ERROR OUTPUT---------------------------------- *** 'Value' is varchar(4000); largest having length of 1000. *** The network packet size is 4096. ?? AM I SUPPOSED TO CHANGE THE BUFFER SIZE?? Your kind help is greatly appreciated Thanks Ziggy
View Replies !
Buffer Size Not Specified Error
Error: "The specified buffer size is not valid. [buffer size specified = 0] Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed: Im working on a c# (.net 2.0) project and loaded data (one column from one table, 800 rows, text, no greater than 80characters in length) from an access db into a data set, then lnserted the data in SQLce, great it works fab! but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error... what have i missed???
View Replies !
Error: The Size Specified For The Link Is Too Small
Hi All! I've got some data in a table called Dim.Sources that I generated by a program to generate data, so the characters are wierd, but it is in the database. When I process the dimension, I get an error like: the size specified for the link is too small, and it will truncate one or more values of the column... It is only for the name column, but not for the id column (I guess because in this column there are only numbers). I'm getting nuts! please, any help will be much appreciated! No way to find any information on the internet about it! I don't remember defining any link size!! Where can I change it?? What is it??? : ) Thank you all in advance!
View Replies !
Internal SQL Server Error
I have the following code and I keep on getting the following error: Internal SQL Server error. Line 160: da.Fill(dtStudent) <code> Private Function CreateStudentDT() As DataTable Dim cmdStudent As SqlCommand = New SqlCommand Dim strSPName As String Dim strSQL As String Dim dtStudent As New DataTable cmdStudent.Connection = objConn cmdStudent.CommandType = CommandType.StoredProcedure cmdStudent.Parameters.Add("@ParamYear", mprmYear.Code) cmdStudent.Parameters.Add("@paramDate", mstrParamToDate) cmdStudent.Parameters.Add("@ParamMonth", mprmMonth.Code) cmdStudent.CommandText = "AmountMarkedMosad" objConn.Open() Dim da As SqlDataAdapter = New SqlClient.SqlDataAdapter(cmdStudent) da.Fill(dtStudent) objConn.Close() Return dtStudent End Function </code>
View Replies !
Example Of Internal SQL Server Error
Here's a quick and dirty example of a legitimate bug in SQL Server.I've seen other examples, but they were all very complex, some eveninvolving cursors and such. This one will produce the error with just13 lines.A police department has a database that contains, among other things,information about parking tickets given out by the officers. Here isthe database and some sample data:create table ParkingTickets (TicketDate datetime,IssuingOfficer int)insert into ParkingTickets values ('1/2/2005 12:31',1)insert into ParkingTickets values ('1/2/2005 14:20',1)insert into ParkingTickets values ('1/3/2005 12:05',1)insert into ParkingTickets values ('1/3/2005 12:22',2)insert into ParkingTickets values ('1/3/2005 14:01',2)insert into ParkingTickets values ('1/4/2005 10:12',2)insert into ParkingTickets values ('1/2/2005 12:10',3)insert into ParkingTickets values ('1/4/2005 12:36',3)So, as you can see, officer 1 gave out three tickets. Officer 2 gaveout three, etc. Management wants a report containing the followinginformation;the Hour of Day,the ID of the Issuing Officer,the number of tickets issued by the officer during this hour during theweek,and the average number of tickets issued by all officers during thishour during the weekSo, if the report is to cover 1/2/2005 through 1/5/2005, the reportwould look like this:selectdatepart(hh,TicketDate) as HourOfDay,IssuingOfficer,count(*) as TicketsIssuedByThisOfficer,TotalTicketsForThisHour_AllOfficers = (select convert(real, count(*))/3from ParkingTicketswhere datepart(hh,TicketDate) = datepart(hh,PT.TicketDate)and TicketDate between '1/2/2005' and '1/5/2005')from ParkingTickets PTwhere TicketDate between '1/2/2005' and '1/5/2005'group by IssuingOfficer, datepart(hh,TicketDate)order by HourOfDay, IssuingOfficerdrop table ParkingTicketsif you'll run that in Query Analyzer, you'll see that it works justfine and produces the expected output. However, if you delete thisline:count(*) as TicketsIssuedByThisOfficer,the query errors out. It's almost like magic. With the count(*)there, the query runs. Without it, the query fails. I can't see anyreason why deleting that line would produce an error. There aremultiple references to this on the microsoft kb, and many of them havehotfixes. But none of them seems to fix this particular instance ofthe bug - and like I said, this is the simplest incarnation that I'veseen.Christopher Secord
View Replies !
Internal Consistency Error
I have a sql databaseI run dbcc checkdb and get no errorsI go to backup the database in enterprise manager, and it won'trestore because it has internal consistency errorsI can go back to an older version of the databaseI run a particular procedure in our accounting software packageNever do I get errors when running dbcc checkdbSometimes I get the backup and restore problem, sometimes I don'tI am doing this on a test server with about 220 megs of RAMI am trying the dbcc checkdb ('dbname',REPAIR_REBUILD) commandAny other ideas?
View Replies !
Internal SQL Server Error.
Can someone pleplease run the script below in SQL2K environment with SP3+ applied and see if you get the same error:create view dbo.vw_INTERNAL_ERROR asselect top 100 percent * from( select [DateField]=getdate()) x1 order by x1.[DateField]goif exists(select 1 from dbo.vw_INTERNAL_ERROR)print 'Exists'elseprint 'Doesn''t Exist'godrop view dbo.vw_INTERNAL_ERRORgo I am getting this: Msg 8624, Level 16, State 23, Line 1Internal SQL Server error. But in SQL2K5 it prints 'Exists' correctly. Thanks in advance.
View Replies !
|