How To Create A New Column And Insert Values Into The New Column
Can anyone assist me with a script that adds a new column to a table then inserts new values into the new column based on the Table below. i have included an explanation of what the script should do.
Column from
Parts Table Column from
MiniParts New Column in
(Table 1 ) (Table 2 ) MiniParts (Table2)
PartsNum
MiniPartsCL
NewMiniPartsCL
1
K
DK
1
K
K
1
Q
Q
0
L
L
0
L
LC
0
D
G
0
S
S
I have 2 tables in a database. Table 1 is Parts and Table 2 is MiniParts. I need a script that adds a new column in the MiniParts table. and then populate the new column (NewMinipartsCL) based on Values that exist in the PartsNum column in the Parts Table, and MiniPartsCL column in the MiniParts columns.
The new column is NewMiniPartsCL. The table above shows the values that the new column (NewMiniPartsCL) should contain.
For Example
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "DK" ( as shown in the table above).
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "K" ( as shown in the table above). etc..
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
OPENROWSET (INSERT) Insert Error: Column Name Or Number Of Supplied Values Does Not Match Table Definition.
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset. I have teh following code but it works fien when column names are given ahead of time. If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match. Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition. here is my code... SET @sql1='select * from table1'SET @sql2='select * from table2' IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn -- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
View Replies !
View Related
How To Insert One Of Two Values Into Column?
I have a form with a few panels on it, and the visibility of the panels is determined by a radiobutton selection. Once a user selects a radio button item, the appropriate panels visibility changes to true. On two of the panels, there is a drop down list with a list of clients, and the dropdownlists are named Client1 and Client2 (Client 1 is included in panel 1 and client 2 is in panel 2) How do I insert the values for client1 or client2 (depending upon which is visible) into the same sql column via a stored procedure? The database field is called client. How do I get the value from my vb.net form into the stored procedure?
View Replies !
View Related
How To Insert The Values In A COLUMN?
I have two tables. S SNO CHAR(5) SNAME CHAR(20) S1 SNo CHAR(5) SNAME CHAR(20) The structure is same but S(SNAME) does not contain data. If I use the following command of SQL then It appends the rows in table. I want that the values should be inserted from TOP to BOTTOM. INSERT INTO S (SNAME) Select sname from s1 Could anybody solve this probelm? Thanks
View Replies !
View Related
How To Create A Column Group Using Two Field Values?
Hello Friends, I am creating a report in which I want to create group column using two field value. Is it possible to do so? We have a requirement in which we are fetching data from two different hierarchy. A B C D E F G H I J K L 1 2 3....................4 5 M ............................. N ......................... O ....................... P The report matrix look like the above one. The elements A,B,C are coming from one hierarchy and D,E,F,G,H,I,J,K are coming from other hierarchy. But i have created one data set to fetch the values for the report. But while creating the column group I am getting both two diff fields so I am not able to use it in single Column group and I want to use only one column group. Can anybody help me out to solve this issue?
View Replies !
View Related
Changing Column Values On Table Insert Trigger
Hello,i have a table and if a record is inserted i will test a numeric valuein this table. If the this value is greather as 1 million, than anstatus column should be changed from 'A' to 'B'.Yes and sorry, this is a newbie question.On Oracle this work simple:create trigger myTrigger on tableXasbeginif :old.x 100000 then:new.y:='B'end if;end;ThanksMaik
View Replies !
View Related
Insert Error: Column Name Or Number Of Supplied Values
In SQL 2005 I created table as SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[logMsg]( [logMsgID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL, [msg] [nvarchar](256) COLLATE Latin1_General_CI_AS NOT NULL, [AppId] [int] NULL, CONSTRAINT [PK_logMsg] PRIMARY KEY CLUSTERED ( [logMsgID] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY] and trying to insert values with INSERT INTO [ProxyDB].[dbo].[logMsg] ([msg] ,[AppId]) VALUES ('Text Test',1) Getting error message: Msg 213, Level 16, State 1, Procedure TrgInslogMsg, Line 14 Insert Error: Column name or number of supplied values does not match table definition. Urgent help is required
View Replies !
View Related
SQL 2005 Bug? Cannot Create Full Text Index For VARBINARY Column That's Populated With Converted NVARCHAR Values
Hi, I was wondering if any SQL Server gurus out there could help me...I have a table I'm trying to apply a full text catalog to, however no results are ever returned due to the text column being cataloged being of varbinary(max) that's being populated from a converted nvarchar(max) value - I've narrowed it down to this specifically, populating with non nvarchar text seems to work fine.To re-create the problem quickly...If I populate the column viaCONVERT(varbinary(max), 'test text')then there is no problem, I get results as expected.However if I populate the column viaCONVERT(varbinary(max), CAST('test text' as nvarchar(max)))no results are ever returned.Is this a bug with SQL Server 2005 Full Text Indexing? I'm happily creating full text catalogs when an nvarchar is not getting converted into a varbinary.I'm setting the Document Type column to '.html' (I've tried changing this to '.txt' in case it was a fault with the html ifilter but the problem persists so I believe I can rule this out).The reason I need to convert an nvarchar to varbinary is that the table holds multi-lingual text and I'm adding a html meta tag <META NAME="MS.LOCALE" CONTENT="ES"> to the beginning in order for the full text indexing word breaker to select the correct language to catalog the text with. The aim being to provide more relevant searches in users native languages (I've read a few articles that describe this technique, but it's the first time I've tried to apply it).Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.
View Replies !
View Related
SQL 2005 Bug? Cannot Create Full Text Index For Varbinary Column That's Populated From Converted Nvarchar Values
Hi, I was wondering if any SQL Server gurus out there could help me... I have a table I'm trying to apply a full text catalog to, however no results are ever returned due to the text column being cataloged being of varbinary(max) that's being populated from a converted nvarchar(max) value. To re-create the problem quickly... If I populate the column via CONVERT(varbinary(max), 'test text') then there is no problem, I get results as expected. However if I populate the column via CONVERT(varbinary(max), CAST('test text' as nvarchar(max))) no results are ever returned. Is this a bug with SQL Server 2005 Full Text Indexing? I'm happily creating full text catalogs when an nvarchar is not getting converted into a varbinary. I'm setting the Document Type column to '.html' (I've tried changing this to '.txt' in case it was a fault with the html ifilter but the problem persists so I believe I can rule this out). The reason I need to convert an nvarchar to varbinary is that the table holds multi-lingual text and I'm adding a html meta tag <META NAME="MS.LOCALE" CONTENT="ES"> to the beginning in order for the full text indexing word breaker to select the correct language to catalog the text with. The aim being to provide more relevant searches in users native languages (I've read a few articles that describe this technique, but it's the first time I've tried to apply it). Any pointers / suggestions would be greatly appreciated. Cheers, Gavin. UPDATE: Below is a T-SQL script you can run to demonstrate the effect I'm experiencing... Code Snippet -- Create test database CREATE DATABASE FullTextTest GO USE FullTextTest GO -- Create test data table CREATE TABLE TestTable ( pk UNIQUEIDENTIFIER NOT NULL CONSTRAINT tablePK PRIMARY KEY, varbinarycol VARBINARY(MAX), documentExtension VARCHAR(5), ) GO -- The below single entry WILL BE FOUND (the text source is being entered directly) INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX),'<META NAME="MS.LOCALE" CONTENT="EN">test entry 1'), '.html') -- The bellow two entries below WILL NOT BE FOUND (the text source is taken from an NVARCHAR(MAX) value) INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry 2' AS NVARCHAR(MAX))), '.html') INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry 3' AS NVARCHAR(MAX))), '.html') GO -- Create the full text catalog sp_fulltext_database 'enable' GO CREATE FULLTEXT CATALOG TEST AS DEFAULT GO CREATE FULLTEXT INDEX ON TestTable (varbinarycol TYPE COLUMN documentExtension LANGUAGE 1033) KEY INDEX tablePK GO -- NOTE: You might need to give the catalog a chance to build before running the script below. -- Now do a search that SHOULD RETURN 3 ROWS of data, but ONLY 1 ROW IS RETURNED SELECT CAST(varbinarycol AS NVARCHAR(MAX)) FROM TestTable WHERE CONTAINS(varbinarycol, 'test')
View Replies !
View Related
Choosing Between Two Column Values To Return As Single Column Value
I'm working on a social network where I store my friend GUIDs in a table with the following structure:user1_guid user2_guidI am trying to write a query to return a single list of all a users' friends in a single column. Depending on who initiates the friendship, a users' guid value can be in either of the two columns. Here is the crazy sql I have come up with to give what I want, but I'm sure there's a better way... Any ideas?SELECT DISTINCT UserIdFROM espace_ProfilePropertyWHERE (UserId IN (SELECT CAST(REPLACE(CAST(user1_guid AS VarChar(36)) + CAST(user2_guid AS VarChar(36)), @userGuid, '') AS uniqueidentifier) AS UserId FROM espace_UserConnection WHERE (user1_guid = @userGuid) OR (user2_guid = @userGuid))) AND (UserId IN (SELECT UserId FROM espace_ProfileProperty))
View Replies !
View Related
Counting Multiple Values From The Same Column And Grouping By A Another Column
This is a report I'm trying to build in SQL Reporting Services. I can do it in a hacky way adding two data sets and showing two tables, but I'm sure there is a better way. TheTable Order# Customer Status STATUS has valid values of PROCESSED and INPROGRESS The query I'm trying to build is Count of Processed and INProgress orders for a given Customer. I can get them one at a time with something like this in two different datasets and showing two tables, but how do I achieve the same in one query? Select Customer, Count (*) As Status1 FROM TheTable Where (Status = N'Shipped') Group By Customer
View Replies !
View Related
Table Column Names = Dataset Column Values?!
I need to create the following table in reporting services PRODUCT April March Feb 2008 2007 2008 2007 2008 2007 chair 8 9 7 4 4 4 table 3 4 5 6 4 6 My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers??? Thanks in advance!!!
View Replies !
View Related
Create Multi Column View From Single Column Data
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field. data_table product_code month value 350 1 10 350 2 20 350 3 30 product_table product_code profit_center 350 4520 result_view product_code profit_center mon1 mon2 mon3 350 4520 10 20 30 My current query gives the following result result_view product_code profit_center mon1 mon2 mon3 350 4520 10 0 0 350 4520 0 20 0 350 4520 0 0 30 Any direction toward a solution would be appreciated. Am using SS2005.
View Replies !
View Related
Add Values To A Column With Derived Column Expression?
Hi, how are you? I'm having a problem and I don't know if it can be solved with a derived column expression. This is the problem: We are looking data in a a sql database. We are writting the SQL result in a flat file. We need to transform data in one of the columns. For example: we can have 3 digits as value in a column but that column must be 10 digit length. So we have to complete all the missing digits with a zero. So, that column will have the original 3 digits and 7 zeros. How we can do that tranformation? We must do it from de the flat file or it can be a previous step? Thanks for any help you can give me. Regards, Beli
View Replies !
View Related
Column Defaults As Parameters And/or Column Values
Good afternoon, I am trying to figure out a way to use a columns default value when using a stored procedure to insert a new row into a table. I know you are thinking "that is what the default value is for", but bare with me on this. Take the following table and subsequent stored procedure. In the table below, I have four columns, one of which is NOT NULL and has a default value set for that column. CREATE TABLE [dbo].[TestTable]( [FirstName] [nvarchar](50) NULL, [LastName] [nvarchar](50) NULL, [SSN] [nvarchar](15) NULL, [IsGeek] [bit] NOT NULL CONSTRAINT [DF_TestTable_IsGeek] DEFAULT ((1)) ) ON [PRIMARY] I then created the following stored procedure: CREATE PROCEDURE TestTable_Insert @FirstName nvarchar(50), @LastName nvarchar(50), @SSN nvarchar(15), @geek bit = NULL AS BEGIN INSERT INTO TestTable (FirstName, LastName, SSN, IsGeek) VALUEs (@FirstName, @LastName, @SSN, @geek) END GO and executed it as follows (without passing the @geek parameter value) EXEC TestTable_Insert 'scott', 'klein', '555-55-5555' The error I got back (and somewhat expected) is the following: Cannot insert the value NULL into column 'IsGeek', table 'ScottTest.dbo.TestTable'; column does not allow nulls. INSERT fails. What I would like to happen is for the table to use the columns default value and not the NULL value if I don't pass a parameter for @geek. OR, it would be really cool to be able to do something like this: INSERT INTO TestTable (FirstName, LastName, SSN, IsGeek) VALUEs (@FirstName, @LastName, @SSN, ISNULL(@geek, DEFAULT)) Does this make sense?
View Replies !
View Related
Insert Data Into A Destination Column Which Doesnt Have An Input Column
Hi, I was wondering how I can complete a column (which doesnt have an input one) with data. For example: I have a sql query which bring data of 3 columns ID | FISRT NAME | LAST NAME 1 MIKE MORGAN 2 SARA JOHANES So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION. Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it. Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column. So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it? Hope I was clear Thanks for your help. Beli
View Replies !
View Related
Sum Of Column Values Of Each Row In Another Column Of Same Table
Hi, I have got a table where i want to display sum of count(Column1), count(Column2) in another column.How can this be done? for example SELECT SUM(Count(pxInsName)+Count(pxFlowName)) AS "pySummaryCount(1)" , Count(pxInsName) AS "pySummaryCount(2)" , Count(pxFlowName) AS "pySummaryCount(3)" , pxAssignedOrg AS "pxAssignedOrg" , pxAssignedOrgDiv AS "pxAssignedOrgDiv" , pxAssignedOrgUnit AS "pxAssignedOrgUnit" FROM pc_assign_worklist WHERE pxObjClass = ? GROUP BY pxAssignedOrg , pxAssignedOrgDiv , pxAssignedOrgUnit ORDER BY 'pySummaryCount(1)' DESC But sum function can not be used on aggregate function. Is there any other way.
View Replies !
View Related
Combining Column Values Into One Column
Hi Folks, Im new to SQL, and I am trying to do the following: I have a table Documents with DocID, Path and FileName. A second table Keywords has KwdID, KeywordString A third table DocumentKeywords links the two with DocID,KwdID. Multiple keywords are linked to one document. I want to create a SELECT query that makes a result table that contains Path, FileName and Keywords columns where the Keywords column contains entries like "Keyword1,Keyword2,Keyword3" ie. a comma delimited list of keyword strings which have been built from the keywords that associate with a specific document. I found a nice sample here http://www.sqlteam.com/article/using-coalesce-to-build-comma-delimited-string which shows how to return just the comma delimited string itself: DECLARE @List varchar(100) SELECT @List = COALESCE(@List + ', ', '') + Keywords.KeywordString FROM DocumentKeywords WHERE KwdID = 1 SELECT @List I cannot seem to integrate this into the query so that it calculates the string for each row on the fly. My suspicion is that the capability is there. Can somebody point me in the right direction? Thanks
View Replies !
View Related
How To Refer A Column When The Referencing Column Is An Identity Column
Hi all, The requirement is to have a table say 'child_table', with an Identity column to refer another column from a table say 'Parent_table'.. i cannot implement this constraint, it throws the error when i execute the below Alter query, ALTER TABLE child_table ADD CONSTRAINT fk_1_ct FOREIGN KEY (child_id) REFERENCES parent_table (parent_id) ON DELETE CASCADE the error thrown is : Failed to execute alter table query: 'ALTER TABLE child_table ADD CONSTRAINT fk_1_ct FOREIGN KEY (child_id) REFERENCES parent_table (parent_id) ON DELETE CASCADE '. Message: java.sql.SQLException: Cascading foreign key 'fk_1_ct' cannot be created where the referencing column 'child_table.child_id' is an identity column. any workarounds for this ?
View Replies !
View Related
Create Trigger To Check Values At Insert/update
I have never used triggers before and I have tried to solve one problem. If I have the column "currency" in a table and want to make sure that the entered value i valid in relation to another table that contains valid currency formats, I did it like this: --------------------------------- CREATE TRIGGER [trigger_checkCurrency] ON [dbo].[Client] FOR INSERT, UPDATE AS declare @currency as char(50) declare @country as char(50) declare cur cursor for SELECT currency, country FROMinserted OPEN cur fetch cur into @currency, @country WHILE @@FETCH_STATUS = 0 BEGIN if not exists(select * from listinfoid where listname = 'currency' and listid = @currency) begin set @currency = (cast(@currency as varchar (3)) + ' is not a valid currency') CLOSE cur DEALLOCATE cur RAISERROR (@currency,16,-1) with log return end if not exists(select * from listinfoid where listname = 'country' and listid = @country) begin set @country = (cast(@country as varchar (3)) + ' is not a valid contry') CLOSE cur DEALLOCATE cur RAISERROR (@country,16,-1) with log return end else fetch cur into @currency, @country END CLOSE cur DEALLOCATE cur update Client set currency = UPPER(currency), country = UPPER(country) --------------------------------- I use a cursor to handle multiple rows in an update query. (SQL2000-server) Is there an easier och better way to do this? I´m a bit unsure of this code. Thanx! /Erik
View Replies !
View Related
How To Set Different Values Only To One Column
Is it possible to set different values to one column only with one sql command? With sql = "UPDATE Table set col = val1 where Pos = y1" ExecuteSQL(sql) sql = "UPDATE Table set col = val2 where Pos = y2" ExecuteSQL(sql) sql = "UPDATE Table set col = val3 where Pos = y3" ExecuteSQL(sql) ... I can set different values to one column, but that is very slow! -- and I have to set up to 500 different values to one column at different positions. For any reply thanks in advance. dlbergh
View Replies !
View Related
Column Containing 2 Values
Hi, I have a status column in Excel file which is getting data from checkboxes. When I exported my file to Excel this status column is containing 2 or more values. The possible values for status are: 1 active 2 Pending 3 Inactive So for each case it might be possible to get values like case 1: status: Active Pending Case 2 : Status: Inactive pending So in my Excel file is containing these values in one status column. I am thinking of storing statuses in a separate table like this: Case Active Pending inactive 1 1 1 0 2 0 1 1 In the SSIS transformation how to achive this? how to split the status columns values and where to store? Thanks
View Replies !
View Related
We Have A Column That Contains Values Only Between 0 And 1
We have a column that contains values only between 0 and 1; most of them are 0 or nearly 0. We perform a basic clustering on that single column with the data mining add-in for excel. The results show three clusters: two of them centered in values between 0 and 1 (0 and 0,47), the other one looks strange and has a very high negative value which is not present in our data. I haven€™t tried running the same clustering directly on Visual Studio. This hapend with other algortim. Do you know the problem We have screen dump if it needs Best regards Capgemini - Oslo
View Replies !
View Related
Trying To Create A Proc That Will Insert Values Based On A Condition That Is Another Table
Can someone give me a clue on this. I'm trying to insert values based off of values in another table. I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year). Two questions 1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great. 2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated. Thanks in advance, bellow is the code that I have so far: RB Select Results.custID, Results.PledgeLastYr From Results, PledgeInLastYear Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear Insert Into Results(PledgeLastYr) Values ('Y')
View Replies !
View Related
TSQL - Using ALTER TABLE - ALTER COLUMN To Modify Column Type / Set Identity Column
Hi guys, If I have a temporary table called #CTE With the columns [Account] [Name] [RowID Table Level] [RowID Data Level] and I need to change the column type for the columns: [RowID Table Level] [RowID Data Level] to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time. What will be the right syntax using SQL SERVER 2000? I am trying to solve the question in the link below: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1 Thanks in advance, Aldo. I have tried the code below, but getting syntax error... ALTER TABLE #CTE ALTER COLUMN [RowID Table Level] INT IDENTITY(1,1), [RowID Data Level] INT; I have also tried: ALTER TABLE #CTE MODIFY [RowID Table Level] INT IDENTITY(1,1), [RowID Data Level] INT;
View Replies !
View Related
How To Reset The Values In Id Column?
Hi,i m using vwd2005 express and sql express.i've created a table in sql express and set id fied to primary key and set identity to yes.now when i add a record a the id is auto generated this way 1,2,3,4....but when i delete these records and add the new record.the id column now adds a new id as 5 then 6,7 etc.but i want the id to generate from 1,2,3 again..how can this be done?any idea?thanks. jack.
View Replies !
View Related
Select 'many Values' From One Column
I'm building a textbox with search functionality towards SQL 2000. The textbox is to include various search phrases, like "phrase1 phrase2 phrase3". Sort of like search engines where all words are considered. Do keep in mind that it's SQL2000 and not 2005. I've got all the strings I want to perform the search against in one column but various values in this column. The only thing I've come up with is to create "WHERE columnName LIKE @phrase1 OR columnName LIKE @phrase2" where I inject % as apropiate and chop up the string, but I'm hoping this is not the solution because it doesn't seem really clean (with 10 search words) and today I'm not having a 'bad-hack' day so I want it better. Whats is the best way of doing this? Cheers! /Eskil
View Replies !
View Related
Adding All Values In One Column
I posed this problem a few days ago, but havent been able to generate the results i need. Suppose my resultset from an sql query gathering totalsales for a given day by a salesrep looks like this:Lastname totalsales orderID-----------------------doe 1403 510doe 500 680 doe 200 701using SUM(Accounts.totalsales) is not adding up the totalsales. What do I need to do to add up the totalsales, and then reassign it to a newfield?netsports
View Replies !
View Related
Select Row Values To Be Column Name
I am new to sql query and have a question.I would like to display row column values as column names.questions table consisted ofquestion_id, group_id, questionresponse table consisted ofresponse_id, group_id, question_id, answerI would like to display the answer responses under the columns ofquestions : such asresponse_id, question(1), question(2), question(3)...It will be greatly appreciated if someone help me to get this down.Jason
View Replies !
View Related
Multiple Values In One Column
I'm trying to write a query which allows that multiple values from onecolumn are placed in one record.ex:tableNrLetters1A2A2B2C3A3B3C3D3E4AThe result I want to get from an select:NrAll Letters1A2A, B, C3A, B, C, D, E4AOlivier
View Replies !
View Related
Converting Column Values
I have a column that is frequently updated with an append query. I need to turn all of the incoming positive values into negative values (as well as convert all of the existing). I tried to multiply the column by -1 in the formula option in table design view but couldn't find the proper formula format. Can anyone suggest an approach.
View Replies !
View Related
Padding Values In A Column
Hi all- I'm inserting 4-digit codes into my db table where the column is a smallint type. Some of these codes begin with 0's, like "0003". How can I format the val in this column to always have the extra 0's in front? Thanks!
View Replies !
View Related
Split Values From Within Column
I have been trying to separate firstname,last name,middle from name column Existing Format Column Name =FIRST,LAST M Desired First Last M I would llike to divide one column into three columns...How can i achieve it.. Please let me know
View Replies !
View Related
Encrypting Column Values
I want to store a function in SQL Server database that when called during insertion, encrypts a value and then stores encrypted text in the column. Is there any built in Encrypting and Hashing mechanism in SQL 2005.
View Replies !
View Related
Avg Based On Column Values
Greetings, I need to avg column data based on grid textboxes. I cannot use AVG because the column values come from a comma delimited string. I have tried using !Parameters to store a count and total for each column but they are always read only. What is the best approach. The columns come from a field which is in the format of (99,75,60,100,-1,20,-1,80,75) for each record -1 means the values are not counted in the average. I have a function for each textbox that parses the value from the list based on the column index. There can be 1 to many columns. Everytime I to set the value of a field or parameter at runtime I get a read-only error. Maybee the only way is to use calculated fields. Any ideas.
View Replies !
View Related
Compare Values In A Column
I have a table with one column. The values can be Y or N. How do I compare the 2 values and return a result depending on the comparison. For example, if I my column data looks like this. Y N I need to compare them and if they match return a specific value and if they are different return a specific value.
View Replies !
View Related
Column Values To Rows?
Good morning all, I have a table from which I need to select every nine values in one column and insert them into another table as a row with nine different columns. For example, I need: WERT 1A08 2A08 3A08 56999 25555 25666 12444 55699 55698 To become: SN1 SN2 SN3 GRN1 GRN2 GRN3 GRN4 GRN5 GRN6 1A08 2A08 3A08 56999 25555 25666 12444 55699 55698 And so on and so forth for the every nine values in the column from the first table. Can somebody please help me with the correct T-SQL query to accomplish this please? I may also need to do the same thing for other tables where I may have fifteen or so values to be extracted into a different table as rows. Thanks in advance, Paul
View Replies !
View Related
Sum Up Multi Values Same Column
Hi All, I have the following Ex: Table A Col A <- Col that I need to check against Col B Col C <- Sum this col So if Col A has the following values: Col A Col C 2 10.00 4 15.00 2 25.00 4 15.00 3 10.00 3 5.00 7 4.00 9 20.00 I need to bring back the sums of 2, 4 and 3 in one resultset. How would I do this? Thanks, JJ
View Replies !
View Related
Retreiving Values From The Same Column
Hi every one, I have a serious problem struggling with sql query the problem is i have a table below Sno CarId carcharacterstics Charactersticvalue 1. Mercides01 Color Red 2. Mercides01 EngineType Desile 3. Mercides01 Speed/Hr 350KM 4. Maruthi01 Color Red 5. Maruthi01 EngineType Desile 6. Maruthi01 Speed/Hr 250KM 7. BMW Gears Automatic 8. BMW EngineType Desile 9. BMW Speed/Hr 250KM Now i need to retrieve the carid whose color is red and Engine type is desile the query i have written is select carid from carchar where ((characterstics='Color' and charactersticvalue=Red) and (characterstics='EngineType' and charactersticvalue=Desile)) But I am not able to retrieve the values. I can retrieve the values correctly if i mention only one characterstics and its value but i cant retrieve if i mention more than that
View Replies !
View Related
|
TRACKER
