How To Split Columns Into Multiple Rows
SOURCE TABLE
ID DESCRIPTION
1 I am a programmer
2 I am a doctor
Destination Table
ID LINE DESCRIPTION(Varchar10)
1 1 I am a pro
1 2 grammer
2 1 i am a doc
2 2 tor
Please someone help me on this.
View Complete Forum Thread with Replies
Related Forum Messages:
Split One Column Into Multiple Columns
Hi all, I have a requirement like this , I have Address Column.It is containing data like Mr. K KK Tank Guntur Jal Bhavan, Univercity Road, Rajkot 9843563469 I have to split this into 3 more columns like(Address1,name,phoneno)-- Means i have 4 columns including Address Column.(Address,Address1,name,phoneno) Example: Address:Rajkot Address1:Univercity Road Name:Mr. K KK Tank Guntur Jal Bhavan PhoneNO:9843563469 How can i acheive this one with out data lose in Address Column. Thanks in advance.
View Replies !
Split Row's Columns Across Multiple Tables
Hello, Hoping someone here can help. Perhaps I'm missing something obvious, but I'm surprised not to see a data flow task in SSIS for splitting *columns* to different destinations. I see the Conditional Split task can be used to route a *row* one way or another, but what about columns of a single row? As a simple and somewhat contrived example, let's say I have a row with twelve fields and I'm importing the row into a normalized data structure. There are three target tables with a 1-to-1 relationship (that is, logically they are one table, but physically they are three tables, with one of them considered the "primary" table), and the twelve input fields can be mapped to four columns in each of the three tables. How do I "split" the columns? The best way I can see is to Multicast the row to three different OLE-DB Destinations, each of which inserts to one of the three target tables, only grabbing the four fields needed from the input row. Or should I feed the row through three successive OLE-DB Command tasks, each one inserting into the appropriate table? This would offer the advantage, theoretically, of allowing me to grab the identity-based surrogate primary key from the first of the three inserts in order to enable the two subsequent inserts. Thoughts? Thanks in advance, Dan
View Replies !
Split One Field In Multiple New Rows
HiHo, just a beginners question: I have the following row with 2 fields: Field 1: Task A Field 2:´ 1;2;3;4 The number of semicolon divided elements in Field 2 is variabel. I would like to create new rows like: Row 1 Field 1: A Field 2: 1 Row 2 Field 1: A Field 2: 2 Row 3 Field 1: A Field 2: 3 Row 4 Field 1: A Field 2: 4 I think I should use a Foreach Loop. But I don't exactly how to do it? best regards Chris
View Replies !
Split One Row Into Multiple Rows Based On Time Elements
I'm dealing with a problem. The record information example DateTimeStart , DateTimeEnd , action , duration (seconds) 2007-02-02 10:30:22 , 2007-02-02 11:30:22 action1 , 600 what i want is for every half hour between start and end a record 10.30 action1 11.00 action1 11.30 action1 how can i create this, i'm a little stuck on this
View Replies !
Arranging Data On Multiple Rows Into A Sigle Row (converting Rows Into Columns)
Hello, I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row: user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3 For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer): user1 answer1 answer2 answer3user2 answer1 answer2 answer3 How can this be done? How can all answers of a user appear on a single row Thanx,Danny.
View Replies !
Merge Multiple Rows Into A One Or More Rows With Multiple Columns
Please can anyone help me for the following? I want to merge multiple rows (eg. 3rows) into a single row with multip columns. for eg: data ID Pat_ID 1 A 2 A 3 A 4 A 5 A 6 B 7 B 8 B 9 C 10 D 11 D I want output for the above as: Pat_ID ID1 ID2 ID3 A 1 2 3 A 4 5 null B 6 7 8 C 9 null null D 10 11 null Please help me. Thanks!
View Replies !
How To Merge Multiple Rows One Column Data Into A Single Row With Multiple Columns
Please can anyone help me for the following? I want to merge multiple rows (eg. 3rows) into a single row with multip columns. for eg: data Date Shift Reading 01-MAR-08 1 879.880 01-MAR-08 2 854.858 01-MAR-08 3 833.836 02-MAR-08 1 809.810 02-MAR-08 2 785.784 02-MAR-08 3 761.760 i want output for the above as: Date Shift1 Shift2 Shift3 01-MAR-08 879.880 854.858 833.836 02-MAR-08 809.810 785.784 761.760 Please help me.
View Replies !
Obtaining Data To Be Displayed In Multiple Columns From Multiple Rows
Hello All, I am rather new to reporting on SQL Server 2005 so please be patient with me. I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row. For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report The table (System Info) looks like:- ID | System part | 1 | RAM 2 | Disk Drive 10| CPU 11| CD ROM | Which So basically I need it to look like this. Name | IP | RAM | Disk Drive| ---------------------------------------------- A | 127.0.0.1 | 512MB | Floppy So Far my SQL code looks like this for 1 item SELECT SYSTEM PART FROM System Info WHERE System.ID = 1 How would I go about displaying the other system parts as columns with info Any help is much appreciated!
View Replies !
Processing Multiple Rows And Multiple Columns In SSIS
I previously posted a problem with result set bindings but I have not been able to resolve my problem. I guess all this comes with being new to programming in this environment! Anyway, I am trying to figure out how to process from an ADO.NET connection multiple rows with multiple columns. I have to read and manipulate each row. I was originally looking at using a foreach loop but have not been able to get it to work. One reply to my previous thought I should be using a data task to accomplish this. Could someone tell me the best way to handle this situation? As a note, I am new to programming in SSIS and basically trying to learn it as I go so please bear with me! Thanks in advance!
View Replies !
Convert Multiple Rows Into Multiple Columns
I need to push multiple rows of data from one table to one record in another table. This can be achieved using cursors but I need to do them without using cursors. Source Table: fld_name fld_value fld1 val1 fld2 val2 fld3 val3 fld4 val4 Destination should be like this: fld1 fld2 fld3 fld4 val1 val2 val3 val4 Thanks.
View Replies !
Multiple Rows And Columns MAX
Hi All,I'm using the sample table:ID | CODE | V1 | V2 | V3----------------------------------------------------------------1 3 10 3 431 4 9 8 221 2 6 2 551 5 57 12 6I want to get for a given ID the MAX(V1), MAX(V2), MAX(V3)and their respective CODEs.For the above table the returned record for ID=1 should be:v1=57, v2=12, v3=55, code_v1=5, code_v2=5, code_v3=2currently I've got a very messy solution, I'mlooking for an elegant way to do this.10x,Assaf.
View Replies !
SQL Server - Multiple Rows Into Columns
Hello! I am trying to figure out if there is a way to convert (unlimited numberof) rows into columns in SQL Server? Can this be done using a SQL query and without creating any extra tables or procedures? Please let me know. Thanks much. -PV
View Replies !
Multiple Rows To One Row And Multiple Columns
Hi, I want to convert multiple rows to one row and multiple columns. I saw some examples with PIVOT but i could not get them to work. Heres what i want to do: This is the how the table is: EmpID Designation 678 CFA 679 CFA 680 CFA 685 CFP 685 CIMA 685 IMCA I want it to display as: EmpID Designation1 Designation2 Designation3 678 CFA 679 CFA 680 CFA 685 CFP CIMA IMCA could anyone provide some help on this? Thanks
View Replies !
Freezing Multiple Rows And Columns In Matrix Control
Hi all, I hv a matrix control in my rdl which looks like - Report Name (static row)Fund Name =Fields!FundName.Value(Dynamic Column Header) (static row)Broker Name =Fields!Broker.Value(Dynamic Column Header) (static row)Account No. =Fields!AccountNo.Value(Dynamic Column Header) ---then other static rows now i want these 3 column header's and there corresponding static rows should be freeze. Can anyone suggest me any solution for this. I can use either RS 2000 or RS 2005
View Replies !
Union Join To Return Multiple Rows Into Columns.
I have a subscriptions table that has many line items for each record. Each line item has a different type, dues, vol, Chapt. 101 dues Mem 100 101 Vol charity 200 101 chapt CHi 300 I want my end result to have one line item per record id, but I keep coming up with an error. I am pretty sure I am close, but need assistance before I can proceed. 101 mem 100 charity 200 chi 300 Error: Server: Msg 207, Level 16, State 3, Line 2 Invalid column name 'PRODUCT_CODE'. Server: Msg 207, Level 16, State 1, Line 2 Invalid column name 'product_code'. Server: Msg 207, Level 16, State 1, Line 2 Invalid column name 'product_code'. SELECTp.ID, p.PRODUCT_CODE as Chapt, p.product_code as Dues, p.product_code as Vol from ( SELECT ID, product_code as Chapt, Null as dues, Null as Vol from subscriptions where prod_type = 'chapt' AND BALANCE > 0 union all SELECT ID, Null as chapt, product_code as Dues, Null as vol from subscriptions where prod_type = 'dues' AND BALANCE > 0 union all SELECT ID, Null as chapt, Null as dues, product_code as Vol from subscriptions where prod_type = 'vol' AND BALANCE > 0 ) AS p GROUP BY p.id
View Replies !
PIVOT/CROSS TAB/Converting Rows To (multiple Group) Columns
Hello All, I am trying to convert the rows in a table to columns. I have found similar threads on the forum addressing this issue on a high level suggesting the use of cursors, PIVOT Transform, and other means. However, I would appreciate if someone can provide a concrete example in T-Sql for the following subset of my problem. Consider that we have Product Category, Product and its monthly sales information retrieved as follows: CategoryID ProductID ProductName Month UnitPrice QtySold SalesAmount 1 1 Panel Jan 5 10 50 1 1 Panel Feb 5 15 75 1 1 Panel Mar 5 20 100 1 2 Frame Jan 10 30 300 1 2 Frame Feb 10 25 250 1 2 Frame Mar 10 20 200 1 3 Glass Jan 20 10 200 1 3 Glass Feb 20 20 400 1 3 Glass Mar 20 30 600 I would like it to be converted into following result set: CategoryID ProductID ProductName UnitPrice QtySold_Jan SalesAmt_Jan QtySold_Feb SalesAmt_Feb QtySold_Mar SalesAmt_Mar 1 1 Panel 5 10 50 15 75 20 100 1 2 Frame 10 30 300 25 250 20 200 1 3 Glass 20 10 200 20 400 30 600 I have purposefully included QtySold here as I need to display both Quantity and Sales as measured column groups in my report. Can this be achieved in sql? I would appreciate any responses. Thanks.
View Replies !
Select DISTINCT On Multiple Columns Is Not Returning Distinct Rows?
Hi, I have the following script segment which is failing: CREATE TABLE #LatLong (Latitude DECIMAL, Longitude DECIMAL, PRIMARY KEY (Latitude, Longitude)) INSERT INTO #LatLong SELECT DISTINCT Latitude, Longitude FROM RGCcache When I run it I get the following error: "Violation of PRIMARY KEY constraint 'PK__#LatLong__________7CE3D9D4'. Cannot insert duplicate key in object 'dbo.#LatLong'." Im not sure how this is failing as when I try creating another table with 2 decimal columns and repeated values, select distinct only returns distinct pairs of values. The failure may be related to the fact that RGCcache has about 10 million rows, but I can't see why. Any ideas?
View Replies !
Split A Column Into 2 Columns
Hi everyoneI guess this should be a simple question for the gurusI have a Data in a column which is to be places in 2 columns instead ofone. How do i go about doing it in MS SQL server? Could someone pleasehelp me. I could do it in access with an update query but things are alittle different in SQL server so I am a little lost.Eg.NameJohn?Doeto be split intoName LastNameJohn DoeThanks in advance.Prit
View Replies !
Split Address Value Into Two Columns
I am trying to get an address field into 2 colums. I need the number value in one column and street name in another column. The data is stored: 876 blue ct 9987 red dr 23 windyknoll This is what I haveelect substring(Address,0,charindex('',Address)) as number ,substring(Address, (charindex('',Address)+1) ,len(Address)) as address from contact
View Replies !
Split The String Into Columns
I have a table called products with the values like ProductId ProductName 10 A 20 D,E,F,G 30 B,C 40 H,I,J I need to display each productid's with ProductId ProductName 10 A 20 D 20 E 20 F 20 G 30 B 30 C 40 H 40 I 40 J I will be appreciated if you can send me the code. Thanks, Mears
View Replies !
Split The Data Into Columns
I have a table called products with the values like ProductId ProductName 10 A 20 D,E,F,G 30 B,C 40 H,I,J I need to display each productid's with ProductId ProductName 10 A 20 D 20 E 20 F 20 G 30 B 30 C 40 H 40 I 40 J I will be appreciated if you can send me the code. Thanks, Mears
View Replies !
Split Rows
not sure if this is possible... but lets say i make a select like select products, stock from table and my rs is chair | 1 couch | 3 lamp | 2 is there anyway in the select to make any row that has stock of more than 1 to make a new row... so my rs would come back as chair couch couch couch lamp lamp Any info would be helpful... Thanks, ~ moe
View Replies !
Query Split Column In 2 Columns In SQL
I like to push 1 column into 2 different columns just to show it on the screen. So no import in another table ore something like that. I have a table like this: Select Name from Cars; Result: Col1 BMWMercedesFordAudi But i like to make a query so it is displayed like this: Col1 Col2 BMW FordMercedes Audi So i can bound a table directly to that column!Is this possible with SQL, and how can i build it.Thanks.
View Replies !
Break /split From A Cell Into Columns
hi, i have labels for data stored in one cell eg: item1; item22; item231; and i want to convert it in following output (probably using substring and charindex) No_question| item_position | label 1|1| item1 1|2| item22 1|3| item231 any idea?
View Replies !
How To Split Data Into Two Rows
I have a query that returns a table similar to: State Status Count CA Complete 10 CA Incomplete 200 NC Complete 20 NC Incomplete 205 SC Incomplete 50 What sort of query will allow me to reformat the table into: State Complete Incomplete CA 10 200 NC 20 205 SC NULL 50
View Replies !
Can I Split Matrix Into 2 Or 3 Rows?
Hi All I have a matrix with single row. The no. of column varies and sometimes goes to 10-15. So it goes to next page and while exporting it inserts blank pages when exported to PDF. I need the column width at least 2.5cm. I need to break the matrix to next row instead of it going to next page say after 6th or 8th column. I tried to work with the example given in the site http://blogs.msdn.com/chrishays/archive/2004/07/23/HorizontalTables.aspx by Chris Hays. But it is showing matrix for each Row Group, which doesn't meet my requirement. I had a work around which worked by putting two matrix one below the other and filtering the columns to be shown in each matrix. If anybody faced this issue or anybody solved the issue kindy reply which will be very helpful for me. One more doubt, Can I get the Column number of the matrix? Thanks in advance Dileep
View Replies !
Split A Single Column Data In To 2 Columns
Hi This is probably a very basic question for most people in this group. How do i split the data in a column in to 2 columns? This can be done in access with an update query but in MS SQL server I am not sure. Here is an example of what i want to acheive FName John?Doe FName LName John Doe thanks for the help prit
View Replies !
MS Access Detail Split Into Columns On Report
I would appreciate any help on this project. I have created an Access database that contains one vehicle. I have also included all options on that vehicle, which are in one column. Therefore the main criteria for the vehicle is listed each time for each different option. On my report I am grouping by the vin and placing the main criteria in the group header area of the report. The options are going into the detail section. How do I get the options to print in two columns within the detail section? I am unable to find any help on this subject, so I am asking you for help. Thank you all! Timpy
View Replies !
How To Split Out Table Rows Into 3 Tables
I imported all rows of my txt file using SSIS 2005 into a table. I am now trying to figure out how to split out the header, payment rows, and maintenance rows. First, some information. An example of table results is here: http://www.webfound.net/split.txt The table has just one field of type varcha(100) because the incoming file is a fixed length file at 100 bytes per row The header rows are the rows with HD in them...then followed by detail rows for that header (see here http://www.webfound.net/rows.jpg). I need to 1) Split out the header into a header table 2) Split out the maintenance rows (related to the header) into a maint table 3) Split out the payment rows (related to the header) into a payment table I'll need to maintain a PK/FK relationship between each Header and it's corresponding maint and payment rows in the other 2 tables. To determine if it's a payment vs. maintenance row, I need to compare chars 30 - 31. If it contains 'MT' then you know it's a maintenance row, else it's a payment row. How in the hell do I do this???
View Replies !
How Can I Split The Rows In 2 Textboxes - Urgent
Hi, I have a report and its been populating from a sproc. and i have 2 text boxes called both of them are poplulated by Fields!Investment Names, but right i can display the data left to right but i want to display the Data starting top to bottom and then towards the right. I tried grouping the data in this way for one text box = CountRows()/2 > 10 . and this shows all the records one below the other, so is there a way that i can display half the records in one text box and the other half in the other text box. I am going kinda nuts over this. Can someone please help me. Regards Karen
View Replies !
One For The SQL Gurus: Split A Delimited Field Into Rows
Hi. I'm trying to write an SQL Query that will take a delimited field and return each item as a row. Example Take the AuthorizedRoles and TabID fields from the Tabs table AuthorizedRoles TabID 0;11;__________1 0; 15 ;17;______6 -2;____________7 I would like to return a unique record for each Authorized Role AuthorizedRole TabID 0____________1 11___________1 0____________6 15___________6 17___________6 -2___________7 Any ideas? Cheers Dave
View Replies !
SQL View To Split Rows In Single Table...
I've been searching the forums and Google for some help splitting up rows in a table without any luck. I'm not quite sure what to even look for I have a table is MSSQL 2000 that looks as follows: Code: id custnum b1_email b2_email b1_sub b2_sub ------------------------------------------------------------------------ 1 123456 b1@host1.com b2@host1.com 0 0 2 654321 b1@host2.com b2@host2.com 1 0 3 321654 b1@host3.com b2@host3.com 0 1 Now... I am hoping create a view that splits these rows up so that only a single email address is on each row. I'd like to split it up as follows: Code: custnum email sub ---------------------------------- 123456 b1@host1.com 0 123456 b2@host1.com 0 654321 b1@host2.com 1 654321 b2@host2.com 0 321654 b1@host3.com 0 321654 b2@host3.com 1 Any help would be great! I imagine some sort of join command can be constructed using a single table?
View Replies !
How To Assign Unique PKs And FKs On Split Of Txt Rows Into DB Tables
SSIS 2005 Ok, I have a task in SSIS that does the following and works: 1) Brings in a txt file 2) Using a conditional component, checks for a value in the row. 3) Based on the value, splits the row into one of 3 tables (Header, Maintenance, or Payment) Here is a print screen of what I have so far which splits Header rows into it's own table, Maintenance rows into its own table, and Payment Rows into its own table: http://www.webfound.net/qst_how_to_add_header_PK_and_FKs.JPG Here is a print screen of the conditional split: http://www.webfound.net/conditional_split.jpg Please take a look at the txt file here before it's processed: http://www.webfound.net/split.txt http://www.webfound.net/rows.jpg Notice that the pattern is a header row, followed by it's corresponding detail rows. The detail rows are either Maintenance or Payment rows. I need to somehow during the Script component or some other way, to assign a unique HeaderID (PK) to each of the header rows and add that ID to it's corresponding Maintenance and Payment detail rows in their corresponding tables as a PK. The problem is 1) I don't know how to do this in the flow of the components as I have it now 2) How do I tell it to create a new Header ID and Header FKs for the detail rows based off of each new Header row? In the end (much later on in my entire package), the goal is to be able to run a stored proc to join and select the Header and Details rows back into a final table so I can then do more processing such as split each header and detail rows into their own txt files, etc....I don't need to go into details why but just know that this is the goal, therefore I need to relate each header row with their corresponding detail rows that are split off into a MaintenanceRow and PaymentRowTable
View Replies !
Turn Columns Into Rows And Rows Into Columns
I have a report which is a list of items and I display everything about the item. It is great. My report table in the layout tab is simple. Header,Detail,Footer. Each Item has 65 columns. The number of items (rows) vary upon what you want to see. Example data. Item#, Description, CaseSalePrice, Cost, BottleSalePrice, Discount 123, Grenadine, 100.00, 75.00, 15.50, 2.00 456, Lime Juice, 120.00, 81.00, 17.25, 2.00 There could be 1 item or 4000 items. What I want to see is. Item # - 123, 456 Description - Grenadine, Lime Juice CaseSalePrice - 100.00, 120.00 Cost - 75.00, 81.00 BottleSalePrice - 15.50, 17.25 Discount - 2.00, 2.00 What I am actually doing is running this the top example and saving to excel. Then copying the sheet. Creating a new sheet then doing a paste special transpose and this gives the users what they want to see. I want to grab that table object in the report layout tab and twist it 90degrees so the header is on the left, detail is in the middle and the footer is on the right. It would be perfect. The dynamic column need is really the problem here. I never know how many items will be in the report. They all have the same basic information like description and pricing. I am all out of creative ideas, any help would be appreciated.
View Replies !
Split Txt File Into Multiple
How can I split this incoming file into separate txts. I want to cut out each Header/detail row section into a new txt. What I mean by header/detail row: incoming txt file: http://www.webfound.net/split.txt basically want to cut out each section like this: http://www.webfound.net/what_to_cut.txt http://www.webfound.net/rows.jpg and a kicker...each new txt name must use a certain field (based on x numbers in header row) followed by another field whcih is the date form the header row. somethign like this: SUBSTRING(InputFieldBigString,LEN(InputFieldBigString) - 59,4) == "HD" + SUBSTRING(InputFieldBigString,LEN(InputFieldBigString) - 1,8) == "HD" + .txt I need some hand holding here, it's my first time trying to do something so complicated in SSIS 2005. If I can first just get the txt split into multiple, that would be a big help.
View Replies !
How To Split A Delimited Column Into Mulitple Rows In The Dataflow?
I'm sure there is probably a very easy solution that I am just not seeing or can't Google... I have a DataFlow that includes a column of Delimited values (i.e. Value1,Value2,etc..). As this DataFlow is populating a parent table, I need split the values into their own dataflow and populate a child table. I've tried a script transformation and couldn't figure out how to accept 1 delimited input row and output multiple rows after a split. Any ideas? TIA, Matthew
View Replies !
Split Address Into Multiple Field
i want to write a code that can split the addresses into multiple fields. anyone can point me out where to start? lets say i have "12 north plaza boulevard apt.16" and i want it to become: address_number 12 suffixA North street_name plaza blvd suffixb apt16
View Replies !
Can I Split A Long .sql File Into Multiple Files?
I have one really long .sql file I'm working on. It's actually a data conversion type script. It's gotten really cumbersome to work on as long as it is. I would like to split up various logical parts of script into their own .sql file.How can I have one file .bat, .sql or whatever call each .sql file in the order I specify? Hoping this is easy. Thanks
View Replies !
Split Column Data Into Multiple Lines
Hi, I have a scenario, where I have a string column from database with value as "FTW*Christopher,Lawson|FTW*Bradley,James". In my report, I need to split this column at each " | " symbol and place each substring one below the other in one row of a report as shown below . "FTW*Christopher,Lawson FTW*Bradley,James" Please let me know how can I acheive this?
View Replies !
Multiple Columns With Different Values OR Single Column With Multiple Criteria?
Hi, I have multiple columns in a Single Table and i want to search values in different columns. My table structure is col1 (identity PK) col2 (varchar(max)) col3 (varchar(max)) I have created a single FULLTEXT on col2 & col3. suppose i want to search col2='engine' and col3='toyota' i write query as SELECT TBL.col2,TBL.col3 FROM TBL INNER JOIN CONTAINSTABLE(TBL,col2,'engine') TBL1 ON TBL.col1=TBL1.[key] INNER JOIN CONTAINSTABLE(TBL,col3,'toyota') TBL2 ON TBL.col1=TBL2.[key] Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record. I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information. for e.g.; i was thinking to concatinate both fields like col4= ABengineBA + ABBToyotaBBA and in search i use SELECT TBL.col4 FROM TBL INNER JOIN CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1 ON TBL.col1=TBL1.[key] Result = 1 row But it don't work in following scenario col4= ABengineBA + ABBCorola ToyotaBBA SELECT TBL.col4 FROM TBL INNER JOIN CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1 ON TBL.col1=TBL1.[key] Result=0 Row Any idea how i can write second query to get result?
View Replies !
DTS - Split Single Source Record (text) To Multiple Target (sql)
I am using DTS and VBScript in DataPump tasks in order to transfer large amounts of data from text files to an SQL database. As the database uses a normalized schema, there is often the case of inserting multiple records in a destination table from various fields of the same record of the source text file. For example, if the source record contains information about goods sold like date, customer, item code, item name and total amount, and does so for a maximum of 3 goods per sale (row), therefore has the structure: [date], [custid], [code1], [name1], [amount1], [code2], [name2], [amount2], [code3], [name3], [amount3] trying to transfer that record to a [SALES] target table (in a normalized database), we would have to split each source record as follows: [date], [custid], [code1], [name1], [amount1] [date], [custid], [code2], [name2], [amount2] [date], [custid], [code3], [name3], [amount3] What is the best way to do this using DTS? I have tried using a datapump task and VBScript, and I guess it has to do with the DTSTransformStat_**** constants, but none of those I used seems to work Vasilis Siatravanis, siatravanisv@interamerican.gr , vasilliss@hotmail.com
View Replies !
Search In Fulltextindexes For Multiple Searchterms In Multiple Columns
I want to search in fulltextindexes for multiple searchterms in multiple columns. The difficulty is: I don't want only the records with columns that contains both searchterms. I also want the records of which one column contains one of the searchterm ans another column contains one of the searchterms. For example I search for NETWORK and PERFORMANCE in two columns. Jobdescr_________________________|Jobtext Bad NETWORK PERFORMANCE________|Slow NETWORK browsing in Windows XP Bad application PERFORMANCE_______|Because of slow NETWORK browsing, the application runs slow. I only get the first record because JobDescr contains both searchterms I don't get the second record because none of the columns contains both searchterms I managed to find a workaround: SELECT T3.jobid, T3.jobdescr FROM (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'network*') or CONTAINS(jobtext, 'network*') ) T1 INNER JOIN (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'performance*') or CONTAINS(jobtext, 'performance*')) T2 ON T2.Jobid = T1.Jobid INNER JOIN (SELECT jobid, jobdescr FROM dba.job) T3 ON T3.Jobid = T1.Jobid OR T3.Jobid = T2.JobId It works but i guess this will result in a heavy database load when the number of searchterms and columns will increase. Does anyone know a better solution? Thanks in advance Bart Rouw
View Replies !
|
TRACKER
