Index Was Outside The Bounds Of The Array - When Table Columns Deleted

Aug 14, 2007



Hi

If I delete 5 or more columns from a table I get the error "Index was outside the bounds of the array", OK is the only response. I then have to close the report and then open it again.

Easy fix is don't delete more than 5 columns, but my template is setup with 15 columns as it's far quicker to delete them as it is to add them 1 by 1 each time. I've finally got around to looking for a hotfix or something similar but can find no mention of this exact error relating to table column deleting.

Anyone else experience this or know if there is a hotfix for it?


Thanks

View 3 Replies


ADVERTISEMENT

Index Was Outside The Bounds Of The Array

Feb 16, 2007

Index was outside the bounds of the array
When working with a SQL Server 2005 database and ASP.NET,
 I get this error when trying to pull a small amount of data from the database,
Any help would be great, thanks a lot
I work for a large company, so I have to watch the code I release.

View 2 Replies View Related

Index Was Outside The Bounds Of The Array.

Jan 9, 2007

On the data tab in reporting services I have just named the stored procedure I wish to run. This Stored procedure expects a datetime parameter. When I select run in the data tab and enter the date (I have tried various different formats) the error "Index was outside the bounds of the array. (system data)". Does anyone know how this can be solved? it seems a simple issue but is turning into a pain to sort out.

View 9 Replies View Related

SQL 2012 :: Index Was Outside Bounds Of Array

Nov 12, 2013

I am experiencing of problem relating to the error message on the production SQLServer2012;

Index was outside the bounds of array. (Microsoft.SqlServer.Smo)

View 5 Replies View Related

SQL 2012 :: Index Outside Bounds Of Array

Jun 11, 2014

When I go to SQL 2012 through SSMS 2005, I get the message Index outside the bounds of array. Will it fix if I install SSMS 2012? Do I need to remove SSMS 2005?

View 1 Replies View Related

DB Engine :: Index Was Outside Bounds Of Array

Sep 16, 2015

I need to setup log shipping from a 2008 Standard to a 2012 Standard server. I have not found any restrictions for this, however, when I want to connect to the 2012 server on the add secondary server page, I receive the following error:'Index was outside the bounds of the array. (Microsoft.SqlServer.Smo)'.

View 3 Replies View Related

SQL 2012 :: Error - Index Was Outside The Bounds Of The Array

Sep 2, 2014

Currently underway with migrating from SQL 2005 to SQL2012. I have loaded all of my SSRS reports into Visual Studio 2010 (SQL Server Data Tools) and they all appeared to upgrade fine. I have 150+ reports and I'm in the middle of recreating a tonne of Subscriptions.

However, I have 4 reports that run fine, execute nicely.... but as soon as I click on 'Subscriptions' I get the index bounds array error.

I could attempt to re-create them. It's only 4 reports after all. But it doesn't answer the question, why would the reports execute fine, but unable to create a subscription?

View 0 Replies View Related

Setup And Upgrade :: Index Was Outside Bounds Of The Array

Sep 17, 2015

I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.

Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0 
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601

View 2 Replies View Related

SQL Tools :: Index Was Outside Bounds Of Array SSMS 2014 SP1

Nov 3, 2015

I am getting an intermittent problem with executing queries on my workstation. Whenever I execute a couple of store procedures that return a large numbers of rows (200,000 to 500,000 rows) I receive an intermittent error message when running the same sp with the same parameters sometimes the procedure runs fine and returns the result, sometimes I get an error message

Error message is: Index was outside the bounds of the array.

Sometimes

Error message is: Internal connection fatal error.

Sometimes I get a datetime overflow

I also occasionally get these intermittent messages when I execute the native query that the SP wraps.

I have SSMS 2015 SP1 installed on my workstation, the servers are a range of server from 2008 R2 SP2 to 2014 SP1.  It feels like a client problem as there are applications connecting to these servers and running the stored procedures without issue...

View 2 Replies View Related

An Error Occurred During Local Report Processing. Index Was Outside The Bounds Of The Array.

Oct 29, 2007

I got rid of the .rdl.data files, which apparently has been a successful fix for this problem in the past. Everything worked fine Thursday when I left (I was off Friday - Saturday), but today I get this error for all but one of the reports in the solution when I try to preview the report. BTW, the published stuff works fine. Thanks in advance for any help.

View 6 Replies View Related

RS2005: Export To Excel Error: Destination Array Was Not Long Enough. Check DestIndex And Length, And The Array's Lower Bounds.

Jan 25, 2007

All,

I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.

"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."

Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.

Machelle

View 10 Replies View Related

Help, Index Out Of Bounds Error

Sep 7, 2007

Hi,

I really don't know why I'm getting this error! Index was outside the bounds of the array.

I am reading a comma-delimited flat file, line by line. This is part of my script component:


Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim rowValues As String()

rowValues = Row.Line.Split(columnDelimiter) 'parse rows by comma



Row.col1 = rowValues(0).Replace("""", String.Empty)

Row.col2 = rowValues(1).Replace("""", String.Empty)


I've done this quite a few times before in other packages. WHY is it telling me that rowValues(1) is out of bounds?? I've commented out EVERYTHING in my script, except for these 2 rows. If I comment out Row.col2, I don't get the out of bounds error. If I include Row.col2, I get the out of bounds error, so it doesn't like rowValues(1).

The file has 13 columns in it. A row looks like this:

"ATMC","004930202",529.000000,"L",11.380000,6020.020000,7210.270000,6072.920000,"BSZTX","MTPO",,"Equities","My Fund Appreciation","06/30/2006"

Thanks

View 6 Replies View Related

Unique Index For Two Columns In A Table

Jul 20, 2005

Hi,I would like to add a unique index that consists of two fields in atable.e.g. tbl_A (field1,field2) -- field1 & field2 Indexed and combinationmust be Unique.Can anyone tell me the actual sql syntax to create this index?Thanks,June.

View 3 Replies View Related

Index Array Out Of Bound

Feb 15, 2008

Dear All,
i'm getting an error "index array out of bound" while saving the record.

sql server 2005 with service pack1 system is working fine.
but at client place it is sql server 2005 with SP2. there we are getting error. any help....

windows 2003 sp1 at both the places. only the difference is
in sql server. how can i handle this

View 8 Replies View Related

SQL 2012 :: 5 Columns In Table - Clustered Index Scan

Mar 28, 2014

I have a table with clustered index on that. I have only 5 columns in that table. Execution plan is showing that Index scan occurred. What are the cause of the Index scan how can we change that to index seek?

I am giving that kind of similar query below

SELECT @ProductID= ProductID FROM Product WITH (NOLOCK) WHERE SalesID= '@salesId' and Product = 'Clothes '

View 7 Replies View Related

Create Array Of Columns

Feb 18, 2008

Absolute beginner to SQL here...

I'm try to create an array of columns and then refer to these columns at the asp.net level.

Can't seem to find this in the SQL literature...so I'm probably looking at this all wrong.

Thanks in advance.

Larry

View 6 Replies View Related

Restore Deleted Columns With Data

Jan 20, 2007

I need to restore a single table which one of my developers has deleted two columns from that table with all datas.

The copy of that database is on another server ,if some one can show me through EM, a step by step i will appreciate.

Thank you.

View 4 Replies View Related

How Dose It Matter For The Non-clustered Index Key Columns And Included Columns?

Apr 24, 2007

Hi, all experts here,

Thanks a lot for your kind attention.

As I am creating the non-clustered indexes for the tables, I dont quite understand how dose it really matter to put the columns in the index key columns or put them into the included columns of the index?

I am really confused about that and I am looking forward to hearing from you and thank you very much again for your advices and help.

With best regards,

Yours sincerely,

View 4 Replies View Related

Accidentally Deleted A Table In My Local SQL Server How Can I Get Back The Table

Jan 13, 2004

Hi,

I accidentally deleted a table in my local server. How can I get back the table? I did not do it as a transaction!

Thanks in Advance

View 1 Replies View Related

How Would I Send A String Array As A Integer Array?

Jun 25, 2007

I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200) 
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
 Thanks

View 5 Replies View Related

SQL 2012 :: Split Data From Two Columns In One Table Into Multiple Columns Of Result Table

Jul 22, 2015

So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:

**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3

**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3

In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID

I am trying to create a table such as shown below:

Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich

This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.

For e.g

Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One

[Code] .....

The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.

View 4 Replies View Related

The Index Entry For Row ID Was Not Found In Index ID 3, Of Table 357576312

Jul 9, 2004

Hi,

I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:

The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.

All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .

Any ideas as to what is causing this error?

View 3 Replies View Related

Advantages Of Using Nonclustered Index After Using Clustered Index On One Table

Jul 3, 2006

Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??

Thanks

View 4 Replies View Related

Convert Table Data Into Array Or Maybe Something Else?!?

Apr 27, 2008

I am using vs2008 with c#.I have table in my database that has email addresses stored in a column.  I would like somehow to take each email address from every row and paste them into a textbox that can be copied and pasted with a comma delimiter into outlook so I can send a mass email.I have no idea how I can accomplish this task. 

View 3 Replies View Related

Inserting And Updating And Array Into An SQL Table

Dec 23, 2003

I have an asp.net project that displays a timesheet based on a fortnightly system.

It has a Y and X axis, i.e. Sun-Mon, Sun-Mon across the top and Categories of hour types accross the Y axis, i.e. Holidays, Overtime, Maintenance.

I was using a datagrid to gather the rows, but I need to have the whole grid in edit mode which is something that requires more coding. So I have swapped to a datalist.

It will take me 240 fields to store all the data in their corresponding fields. So I basically need to know if there is an easier way to store two dimensional array type data into an SQL table using a minimum of fields.

View 1 Replies View Related

Array / Table As Return Type

Aug 16, 2006

Hello All,I have a scenario in which my stored procedure has to return fewvariables with their value and also the collection. Now in SQL their isno such as array, so the best is to return the table in place of.I am execting the stored procedure by having sql command in place.and created the various parameters(variables) those i need the valuesof and secondly wondering how should i be creating the parameter as atable returntype.Any help on this would be a million worth useful.I can excerpt the code if required.RegardsSandesh Kadam

View 1 Replies View Related

Creating A Stored Procedure That Will Summarize Data In A Table Into A Table Reflecting Period Data Using An Array Type Field

Sep 20, 2007

I am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.

Any help would be greatly appreciated.

Current Table

Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40

Proposed Table

Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008

Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008

Thanks,
Mike Misera

View 6 Replies View Related

Passing An Array To Query In A Table Adapter

May 23, 2007

I'm looking for a way to pass an array of values as a parameter to a query in a table adapter.  For example I want to run a query something like:SELECT * FROM menu WHERE menu_role IN (@roles)And I could pass something like 'RegisteredUser, SuperUser, OtherUser' to the @roles parameter.For some reason I can't figure out a way to do this.  Any help would be greatly appericated.Thanks,Ryan. 

View 6 Replies View Related

Inserted/deleted Table.

Mar 4, 2004

Hi,

I am currently working on a MS SQL server 2000.

I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?

Thanks

View 1 Replies View Related

Retrieve Deleted Table

Dec 6, 2004

hi there,

by mistake i deleted tables in the DB, i heard once that there is a way to retireve it after it has deleted, from the temp or something like that

so is there a way?

Thanks

View 1 Replies View Related

Possible To Tell Who Deleted Records In My SQL Table?

Dec 12, 2005

Hello All.

Is there a way to check who has deleted records from my SQL tables? I asked because I notice records keep disappearing from my tables recently for no reason. The DB is only accessible by a few IT staff. Business users have no direct access to it so they can't do any harm and there is no application that update these record missing tables.

I don't need to know the exact records that have been removed. I need info on who has made a deletion activity on which table, date and time is good enough.

Thank you.

Best regards

View 5 Replies View Related

Inserted And Deleted Table

Aug 24, 2007



hi
for after trigger the records stored in followig table
inserted and deleted table.

but i want to know where this tables physically stored ...i mean in which database master or some other database?

and 2nd thing tigger fired for each row or for only insert,delete,update statement?

thanx

View 8 Replies View Related

How To Index Through Columns

Apr 18, 2005

How do you index through a set of Columns Programmatically using SQL. I have a Table all the columns have the same data for different dates. Column names are Col_0, Col_1, Col_2,.....Col_100, Col_101. I need to perform the same calculation on each column to manipulate the data into a different table. Is it possible to do a While loop that changes the Column name in a SELECT statement. I have tried to do this but can't seem to get it to work. Please help !

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved