Integration Services :: Convert SSIS Datetime Variable Value

Jun 11, 2015

I have created one variable name migration_start datetime which give me default format of 6/11/2015 1:26 AM...But I expecting to get in 2015-06-11 01:26:22.813 format.I have used below expression betting getting issue with that

(DT_STR, 4, 1252) DATEPART("yyyy" , @[User::migration_start]) + "-" + RIGHT("0" +
(DT_STR, 2, 1252) DATEPART("mm" , @[User::migration_start]), 2) + "-" + RIGHT("0" + (DT_STR, 2, 1252) DATEPART("dd" , @[User::migration_start]), 2)

View 5 Replies


ADVERTISEMENT

Integration Services :: Change Datetime Format Of Variable

Jun 12, 2015

I am using Execute sql task in my SSIS package, and I am trying to make the following query:

<o:p></o:p>
Select max(sqlid) from archive.dbo.Archivebbxfbhdr
where timein <= ?<o:p></o:p>
Where ? is my input parameter variable migration_start which is a datetime.<o:p></o:p>

My issue is that variable name migration_start which give me default format of 6/11/2015 1:26 AM

But I expecting to get in 2015-06-11 01:26:22.813 format.<o:p></o:p>

How I can I change the datetime format of my variable to be (yyyy/mm/dd)hh:mm:ss)?<o:p></o:p>

View 3 Replies View Related

Integration Services :: Convert Seconds To HH:MM:SS Using SSIS

Oct 7, 2015

converting seconds to HH:MM:SS using SSIS.  I know how to do it in T-SQL.

View 13 Replies View Related

Integration Services :: How To Convert TXT To Excel And CSV In SSIS

Nov 4, 2015

I have created SSIS package  where it generates .txt output file. But my client added new requirement that generated .txt has to be convert into excel or CSV  (Depends on client selection on portal where it stores values in table to know in which format they requires).

View 13 Replies View Related

Integration Services :: Using Object Variable In SSIS?

Aug 17, 2015

I have one scenario. I am calling all columns result set to an variable and inside for each loop container using script task to get message about how many columns are coming in the loop.

At last using send mail task to send automated mails to group of people,but issue it is taking only person's mail id and coming out of loop.

how to call object type variable ?

View 4 Replies View Related

Integration Services :: Compare Datetime With Specific Time In SSIS

Oct 31, 2015

If we want to compare datetime vs a specific time what should we do?

i.e.   startdatetime                     specific  time
     2015-10-12 00:03:19:020                16:23:00

I want to compare just time in startdatetime coloum vs a specific time i.e. 16:23 .

I convert startdatetime to (DT_DBTIME) after that i want to calculate just time difference. how can i do it?

i.e i want to calculate this two (DT_DBTIME) columns without any date ==> (16:23:00)-(00:03:19)

View 6 Replies View Related

Integration Services :: SSIS Logging To Output Value Of A Variable

Aug 28, 2015

I have enabled SSIS logging for a Package.

Is it possible for SSIS logging to output the value of a variable. 

Currently, it is only outputting the name of the variable, such as:"User::FilePath"

View 2 Replies View Related

Integration Services :: Yesterday Date To SSIS Variable

May 7, 2015

I need to create a variable expression that will be passing yesterday's date to a sql command but when I create the variable there is only the datetime datatype, how can I trim the time portion from this expression to get the date portion :

DATEADD( "day", - 1 , GETDATE() )

View 5 Replies View Related

Integration Services :: Environment Variable In SSIS Not Being Recognized In JOB

Jun 16, 2015

I've created a SSIS Package and it's connection is based on Environment Variable(please seeprocedure).

Now, I'm trying to create a job that calls this package and it seems that when you view Data Sources, it still pointing to the old server.

But when you open-up the package through BIDS in the same server, it's using the new reference that I have specified in the environment variable (please refer to the first image).

I came across this blog with the same issues as mine. He suggested to re-start the SSIS Service which I already did  but nothing happens. I even re-started the SQL Agent but still no luck.

I'm not sure what else is missing except for re-starting the machine which is the last thing I want to do as this is PRODUCTION server.

View 7 Replies View Related

Integration Services :: Overwriting Variable Expression In SSIS

Jun 15, 2015

We have one package in production. variable var_date has an expression already defined to it. How can we overwrite this variable value from config file or from cmd file. We don't want to make changes to the package and redeploy it.

View 2 Replies View Related

Integration Services :: Convert Field Of VARCHAR To INT Datatype In SSIS 2014?

Nov 17, 2015

I'm trying to convert a column in my source table of datatype varchar(6) to a column of datatype int in my destination. I tried using the Derived Column/Data Conversion transformations but none of them worked. So, I tried using the following C# (credits to the original poster) and getting an error during compilation.

Note: "MyCol" is the Input Column I've specified in the Script Component and "CleanCol" is the Output column I've specified as datatype [DT_I4].

public override void Input0_ProcessInputRow(Input0Buffer Row)
{
int colOut = 0;
if (!Int32.TryParse(Row.MyCol, out colOut))
{
Row.CleanCol_IsNull = true;
} else {
Row.CleanCol = colOut;
}
}

The best overloaded method match for 'int.TryParse(string, out int)' has some invalid arguments

The other expression I've tried was:

ISNULL(MyCol) ? (dt_i4)"" : (dt_i4)MyCol

From the above code, you might have understood that the source field has some blank records as well in the MyCol field.

What is the best possible way to do the conversion from a String to Int or fixing the error from the above.

View 10 Replies View Related

Integration Services :: Convert Access Database As Part Of SSIS Package

May 15, 2015

I need to convert an access 2000 database to access 2013 and then load the data into a sql server 2012 database. Thus any urls (links) that will show me how to accomplish the following in an SSIS package:

1. Convert an access 2000 database to access 2013 database?
2. Load the converted Access 2013 database into sql server 2012?

View 2 Replies View Related

Integration Services :: Passing More Than One Variable As Parameter Value To SSRS By SSIS

Jul 13, 2015

public Sub Main()
        Dim url, destination As String
        destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
        url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
        SaveFile(url, destination)
        Dts.TaskResult = ScriptResults.Success
    End Sub

How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into  excel sheet.

View 2 Replies View Related

Integration Services :: SSIS - How To Use Variable In Connection Manager Properties

Aug 24, 2010

How to use variables in Connection Manager's properties? I see some replies through Configuration Package. But what if, it is still in development stage? I mean, can I use the Variable tab and create some variables like

User::DBUserNameSource, User::DBPasswordSource,
User::DBuserNameDestination, User::DBPasswordDestination,

Then put them in Password and UserName property of Connection Manager? If this is possible,  how and how can I set the values of those variables I mentioned when I am going to deploy the package in the Production?

View 26 Replies View Related

Integration Services :: Passing Parameterized Query Through Variable In SSIS

May 22, 2015

I have defined a variable Var_Query_SQL and passed the below query using expression but it is showing error. where am i going wrong.

"SELECT
       sample_id ,
       sample_time ,
       trans_date ,
       product = mh.[identity] ,
comments = s.m_smp_comment

[URL] ...

View 4 Replies View Related

Integration Services :: Setting A Variable With Multiple Rows In SSIS

May 11, 2015

I need to do something like this in SSIS:From one SQL table I need to get some id values, I am using a simple sql query:Select ID from Identifier where value is not null.I've got this result:As a final result I need to generate and set a variable in SSIS with the final value:

@var
= '198','120','ACP','120','PQU'

Which I need to use later in a odbc expression.How can I do this in SSIS?

View 4 Replies View Related

Integration Services :: How To Compare SSIS Variable And Column In Table

Apr 21, 2015

My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv

Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:

If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date

If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.

View 3 Replies View Related

Integration Services :: Unprocessed File Count Variable In SSIS

May 12, 2015

I've been working on an issue in an SSIS package and getting strange results using a package variable named "UnprocessedFileCount".  I'm looping through files in a directory (using a Foreach Loop Container) to process data into the database, and after a certain amount of time, I stop processing the files and short circuit the loop to finish the package faster.  I was tasked with counting the number of files that weren't processed and it seemed easy enough to count how many times the loop "short circuited" by incrementing a variable in a script task.  I then wanted to send out an email and include the incremented variable in the body of the message.

I ran into issues when I used the variable name "UnprocessedFileCount".  The variable was incrementing within the loop as expected.  However, it was always resetting back to "0" after the ForEach file Loop Container completed.

After some heavy searching on the subject, to no avail, I eventually found that changing the variable name did not reset the variable.

I'm still using SQL Server 2008.

View 3 Replies View Related

Integration Services :: Converting String Variable To Integer In SSIS

May 20, 2015

I am trying to convert a string variable to integer in SSIS using the expression task.

@[User::Nummer] = (DT_I4) @[User::Name]

But I get an error that the conversion from (DT_WSTR) to (DT_I4) is not possible!!

View 2 Replies View Related

Integration Services :: Send Email Task With Variable In SSIS

Oct 5, 2015

I would like to send an email in a SSIS Package.

I have an Execute SQL Task that saves the results in a variable such as, RecCounts.

I have a Send Mail Task with a message source of: [User::RecCounts]

However, when I run the package I get this error.

Error: Failed to lock variable "[User::RecCounts]" for read access with error 0xC0010001 "The variable cannot be found.

This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".

View 4 Replies View Related

Integration Services :: INSERT Variable Values Into Table In SSIS

May 12, 2015

I am trying to insert in table using execute sql task.

I want to pass value of Load_Frequency through parameter

But I am getting below error

[Execute SQL Task] Error: Executing the query "Insert Into [dbo].[ETL_LOAD_MAIN] (
[Load_Fr..." failed with the following error: "The statement has been terminated.". Possible failure reasons:
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Insert Into [dbo].[ETL_LOAD_MAIN] (
[Load_Frequency] 
,[Load_Start_DateTime]
,[Load_Overall_Status] 
) Values (?,getdate(),'In Progress')

View 2 Replies View Related

Integration Services :: How To Store Details From FileName Into Variable Using SSIS

Oct 19, 2015

I have one package through for each loop container I am loading all flat files into  target table and its working fine.Now I my requirement is to  capture the .txt file and loading into sqlserver table.Please check below file name.

CCCLOC_DDDLOC_LOC_20151203_240000_trigger.txt

from above file name I have to derived below detail.I have variable @File_Name which is used to stored the file name at rune time.Now I want to derived 5 values from the file name as below

Clientname=CCCLOC
Partnername=DDDLOC
Entity=LOC
Creationdate=20151203
Creationtime=240000

how to write expression for above situation.

View 10 Replies View Related

Integration Services :: Loading Datetime Field Give Wrong Dates In SSIS

May 30, 2015

I am using Sql Server 2012. I have a table which has a field as Datetime (it is a table in Dynamics CRM 2011 so I have no control of the data type). Say this field is called BisStartDate. If I run this query in management studio.

select
BisStartDate, BisStartDateutc
from myTable
where _bisnumber=10375

I will get:

BisStartDate                                             BisStartDateutc               

2014-07-29 00:00:00.000                      2014-07-29 05:00:00.000

*in CRM, datetime is saved in 2 fields, one is the current time, the other one is the utc time.

You can see the offset  between the datetime and utc is 5 hours.

However when the same statement was running inside a SSIS package on the server, the result returned is:

BisStartDate                                             BisStartDateutc               

2014-07-28 23:00:00.0000000            2014-07-29 05:00:00.000

And if I do

datediff(MINUTE,CRMAF_BisSection.ttc_section_startdatetimeutc,CRMAF_BisSection.ttc_section_startdatetime)

I will get -5 if I run it in ManagementStudio and -6 is running on server package(running inside VisualStudio will be -5, same as running a query in ManagementStudio).

I think when the record was saved, “date” is 5 hours offset to UTC time but now the system use the current utc offset which is 6 hours. I just want to use the BisStartDate as it is. How do I let the SSIS turn off the conversion.

The same datatime is saved in another system then we compare them to check the data entry. Now because of this one hour difference, sometime the Day will be different.

View 8 Replies View Related

Integration Services :: Edit Project Param Variable Value In SSIS 2012

Jul 7, 2015

I have declared one variable in Project param with some value.

I want to edit that varaiable through Script task using C# / VB code.

Looking for C#/VB code which needs to be used in Script task to edit project param level variable[not for package level variable].

View 3 Replies View Related

Integration Services :: Storing Column Value In SSIS Variable When Skipping Header Row?

Apr 28, 2015

I have a file with a header row which contains the date of the file and under that all the columns without a header.

In SSIS package I skip row and manually name the different columns.

However, I want to use the column in the header row to store the date value in an SSIS variable and use that variable to write it to our staging table. How can I do this when I skip the header row?

View 5 Replies View Related

Integration Services :: SSIS Read First Row Column From A Flat File Into Variable

Jul 16, 2015

Public Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64

[code]...

Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.

SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:

I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."

View 3 Replies View Related

Integration Services :: Cannot Create Date Type Variable In SSIS 2012?

Oct 6, 2015

As part of my package, i require a date (Only date, not DateTime) which is 10 months previous to get date.Eg: for today if the package executes, then i want 12/1/2014 , which i will use in my package as a filter like 'where date='?' where ? is a paramter which is is derived from the above logic

So, I have a project parameter @ppdate with value as  -10. I create a variable with DateTime (because there is NO date type for SSIS) and gives the expression as below

dateadd("Month",@ppdate, DATEADD("D",-(DAY(GETDATE()))+1,GETDATE())) , I am getting '7/1/2011 11:33:38 AM' which i don't want - i want only '12/1/2014'. How can i get it?

To get '12/01/2014',  If i change the variable from DateTime to string, then i think i cant use the value in the filter condition like ''where date='?' because this does not accept string. Is this correct?

View 3 Replies View Related

Integration Services :: Assign Value Of Aggregate Transform To A Variable Without Using Script Task In SSIS

Jun 2, 2011

In my current project i have a requirement to assign value of an aggregate transform to a variable. But i need to accomplish it without using a script task.

View 3 Replies View Related

Integration Services :: SSIS Script Task To Convert XLSX Files With Multiple Sheets To CSV File

Dec 11, 2014

I have been strunggling to find solution to convert XLSX files with multiple sheets to csv file.

Requirements
>> Convert XLSX file with multiple sheets to CSV file
>> CSV file names : XLSX filename + '_' + sheet name
>> scirpt has to be in VB as i am using ssis 2005
>> I started develping scirpt using Micorosoft.office.interop.Excel.dll . this dll is referenced to script task.
>> found web link as useful.. [URL] ....

View 4 Replies View Related

Integration Services :: How To Read A Specific String From Text File As Output Variable In SSIS

Nov 5, 2015

I am downloading a webpage as a text file in order to read a specific string to assign it as a variable/parameter in order to create an output file name. I would like to know how would I be able to look for a specific string and output as another variable for the rest of the package.

2015 Conforming Loan Limits
------------------------------------------------------------------------
o _Loan Limits for Calendar Year 2015--All Counties _[XLS]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL_FLAT.xlsx>_ ,
_[PDF]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL.pdf>_
​ o _List of 46 Counties with Increases in Loan Limits for 2015

[Code] ...

To explain it a more better way, I have a sample webpage text here. I should be searching for "FullCountyLoanLimitList" appended by the current year (like FullCountyLoanLimitList2015) and copy the entire file name in the text file and assign it to another variable so that I can download that specific file using WebClient connection.

View 4 Replies View Related

Integration Services :: Exclude Time In Date Time Variable In SSIS For Loop?

Oct 22, 2015

I am trying to load previous days data at 3 am via a SSIS job.

The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.

Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000

How can i do this? 

View 2 Replies View Related

Integration Services :: Variable Value Does Not Fit Variable Type

May 27, 2015

I have an SSIS package that creates a csv file based on a execute sql task.

The sql is incredibly simple select singlecolumn from table.

In the properties of the execute sql task I specify the result set as "full result set" when I run it I get the error that: Error:

The type of the value being assigned to variable "User::CSVoutput" differs from the current variable type.

Variables may not change type during execution. Variable types are strict, except for variables of type Object.

If I change the resultset to single row then I only get the first row from the DB (same if I choose none), If I choose XML then I get the error that the result is not xml. What resultset type do I need to choose in order to get all the rows into the CSV? The variable I am populating is of type string and is User::CSVoutput

View 8 Replies View Related

Convert SSIS DateTime To A String

May 13, 2008

Being a newbie to SSIS I'm not sure of the most efficient method of converting a DateTime object to a String.

I'm from a C# background where this would be easy using DateTime.ToString("YYYYMMdd"). I want to use the date in a file name so don't require most of the parts.

I'm sure I could do this using a script task to produce a file name for each row of data in my table and add that filename to the dataset but it seem like overkill to do something that should be simple. Also as I'm supposed to be getting to grips with SSIS I shouldn't keep running back to what I know.

My current approach is to derive a column and build up an expression to convert the date into a string. The only problem being that it doesn't work.
The expression I'm working with is:
(DT_WSTR, 50)([OrgName] ) + "_" + (DT_WSTR, 50)( [PayrollName] ) + (DT_WSTR, 4)(YEAR( [ProcessedDate] )) + (DT_WSTR, 2)(MONTH( [ProcessedDate] )) + (DT_WSTR, 2)(DAY( [ProcessedDate] )) ".txt"

Can anyone see where I'm going wrong?

All comments greatly received.

Cheers
Ben

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved