Integration Services :: Passing Connection String Dynamically To SSIS Package

Jul 12, 2012

I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.

Also  in package i used ADO.net  as source for  *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.

View 8 Replies


ADVERTISEMENT

Integration Services :: Assign Values To Variables Dynamically In 2012 SSIS Package

Jul 16, 2015

Can I assign values to variables in 2012 using below command? I have used the same command in 2008 and it works fine.

DTEXEC
/SERVER"XXXXXXXXSQLSERVER2012"/SQL"Mypackage.dtsx"/SETPackage.Variables[FilePath].Value;"C:Test estvariable.csv"

Wondering is there a different way in 2012 to pass values to variables dynamically.

View 2 Replies View Related

Integration Services :: Create SSIS Package Dynamically For Inserting Data From Flat File To Table?

Sep 30, 2015

I have requirement like  to develop dynamic package for inserting data from flat file to table.

Find below points for more clarification :--

1) if I changed the flat file values and name  in source variable AND  the table name should be also changed based on variable value .

2) it should dynamically mapped with column values with source file as we have to insert data in target table.

See below diagram for more clarification.

View 10 Replies View Related

Integration Services :: Server Authentication Connection String In SSIS

May 27, 2015

The below connection string works fine for windows authentication.

Data Source=Test123;Initial Catalog=Globe;Provider=SQLNCLI10.1;Integrated Security=SSPI;

what changes i should make in the above connection if i have sql server authentication mode?

View 2 Replies View Related

Integration Services :: How To Make SSIS Prompt For Connection Values When Running A DFT Or Package From Visual Studio

Jul 15, 2015

Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.

However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio? 

View 6 Replies View Related

How To Set Connection Of A SSIS Package Dynamically

Apr 27, 2008



Hi,
I am new to SSIS and i have to develop a ssis package which will run in a production machine through VB.Net(2003) exe.I am facing a problem while setting connection string of SSIS package dynamically.Can anybody help me on this?

View 1 Replies View Related

Integration Services :: SSIS Dynamically Export Tables To Raw Files

Nov 16, 2011

Every day an application creates new tables and dumps static info into them. 

I would like to create a package to dynamically export those database tables to raw files for long term archive, one file per table. Here is what I have so far and the issue I am having.

1)     Get a list of un-archived tables.
2)     Foreach table do the following.

a. Export the table into raw file.
b. Zip the raw file.
c. Update archive tracking table.

As long as the metadata for each table is the same this package seems to work fine. However, I have many tables with different metadata.  How can I dynamically get the package update the metadata column collection when it hits a new table? When it hits a table with different metadata I am getting warnings like this:

The column "some_column" needs to be added to the external metadata column collection.

The "external metadata column "someother_column" (103)" needs to be removed from the external metadata column collection.

Then I get this error:
Error: 0xC004706B at dump the table into a raw file, DTS.Pipeline: "component "OLE DB Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA"

View 7 Replies View Related

Integration Services :: Database Creation Dynamically In Server From SSIS

Jul 31, 2015

I need to create a DB dynamically in the Server from the SSIS only....

How to implement this....

View 4 Replies View Related

Integration Services :: How To Make File And DB Connection Passing In Job As Parameter

May 6, 2015

I have following job script. I need to make file connection and db connection passing in job as parameter.

where in following script is should pass it.

if i am passing here but when i change path it still getting old path in package.what i needs to change in package.also how to make connection dynamic so in each env when we deploy it will automatically change. We have sql job script for each env.

View 2 Replies View Related

Integration Services :: SSIS Add / Remove Columns Dynamically Into Unpivot Object

Jul 9, 2015

I've created a SSIS package which takes a matrix from Excel file and insert into SQL table. It works perfectly! However, if I would add a new column into that matrix in Excel. Unpivot tool should take into process dynamically. Is there a way to provide this automatically? 

View 4 Replies View Related

SQL 2012 :: Dynamically Create Connection To A Database Within SSIS Package

Aug 6, 2015

I am trying to dynamically create the connection to a database within an SSIS package.

the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.

Is this possible, if so how?

View 0 Replies View Related

Integration Services :: Passing More Than One Variable As Parameter Value To SSRS By SSIS

Jul 13, 2015

public Sub Main()
        Dim url, destination As String
        destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
        url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
        SaveFile(url, destination)
        Dts.TaskResult = ScriptResults.Success
    End Sub

How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into  excel sheet.

View 2 Replies View Related

Integration Services :: Passing Parameterized Query Through Variable In SSIS

May 22, 2015

I have defined a variable Var_Query_SQL and passed the below query using expression but it is showing error. where am i going wrong.

"SELECT
       sample_id ,
       sample_time ,
       trans_date ,
       product = mh.[identity] ,
comments = s.m_smp_comment

[URL] ...

View 4 Replies View Related

Integration Services :: Connection String In Dev And Production?

Apr 21, 2015

I have a several servers that i want to pull data from.I put the connection string in a OBJECT variable that come from configuration table and use it in the for loop mapping the value to local variable called connectionstring, this variable is the expression for the connection string property.So far everything is working as expected.

my problem is that on my development i put my local server in the connection string variable so i will be able to connect to the server so i will be able to map source to destination.

When i deploy the solution to production the data in the configuration table is different obviously but i get a connection error that saying that it try to connect to my dev server.why?

View 8 Replies View Related

How To Compose The Connection String Of A SSIS Package That Execute Another Package?

Jul 6, 2006

Dear All,

I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?

Regards,

Strike

View 8 Replies View Related

Integration Services :: Execute Process Task / Passing In Variables From SSIS To Powershell Script

May 15, 2015

I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,

1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.

2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername
and database name.

2a)  Within the for each loop, i have an execute process task that is configured as

 i) Executable:  C:WindowsSystem32WindowsPowerShellv1.0powershell.exe
 ii) Arguments:  Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
             
Note:  @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,

param([String]$Server_Name,[String]$Database_Name)
$Server = $Server_Name
$Database = $Database_Name
$savePath = "SalesDepartmentsData ScienceUsersSANDEEP PStoredProcedures_Backup"

[code]...

When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?

View 3 Replies View Related

Integration Services :: SSIS Foreach Loop Container Passing Variables To Store Procedure

Sep 8, 2015

I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure.  I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container.  The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure  ?" within the "Execute SQL Task".  The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one.  I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task".  How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?

View 4 Replies View Related

Integration Services :: Executing Child SSIS Package In Parent SSIS

Oct 9, 2015

I want to achieve the following in (SSIS/SSDT for SQL 2012) - 

I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).

I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.

I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?

When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.

View 8 Replies View Related

Integration Services :: Connection String Error - Expression Cannot Be Parsed

Jul 26, 2015

Error: The variable "$Package::LocalConfigDB_ConnectionString" was not found in the Variables collection. The variable might not exist in the correct scope.

Error: Attempt to parse the expression "@[$Package::LocalConfigDB_ConnectionString]" failed and returned error code 0xC00470A6. The expression cannot be parsed. It might contain invalid elements or it might not be well-formed. There may also be an out-of-memory error.

View 3 Replies View Related

Integration Services :: Why SSIS Is Converting ID As Unicode String

Jul 28, 2015

I am using OLE DB source to extract data from Oracle. I have query (sample) like below, but SSIS is converting ID as Unicode String [DT_WSTR]. Why is that? and how to avoid this?

SELECT
1 AS ID
FROM 
ORACLE_TABLE

View 3 Replies View Related

Integration Services :: How To Design SSIS Package

Nov 21, 2015

Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.

I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.

For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools. 

I did explicitly install SSDT when I installed VS2015.  I also installed it separately.  I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services.  Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...

how do I get to the GUI where I can design ETL packages? 

View 7 Replies View Related

Integration Services :: SSIS Package Actually Failed

Oct 2, 2015

The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.

View 9 Replies View Related

Integration Services :: How To Create Package In SSIS

May 1, 2015

Create SSIS package for the below output:

Table

Eno  ename  Eloc      Edept
1       Sid       Pune     101,201,301,401,501,601

Output:

Eno ename Eloc Edept
1 Sid Pune 101
1 Sid Pune 201
1 Sid Pune 301
1 Sid Pune 401
1 Sid Pune 501
1 Sid Pune 601

View 2 Replies View Related

Integration Services :: How To Create A SSIS Package

May 1, 2015

Create a SSIS package for following scenario.I have one excel file which will contain 10 records for Monday, 12 records for Tuesday, 7 on Wed, no records on Thursday so if records are there I get mail if no records are there I didn't get mail daily.

View 2 Replies View Related

Integration Services :: BAT File To Run SSIS Package

Oct 7, 2015

Looking for code for .Bat file to  run ssis package and i want to run it from Tidal.

View 8 Replies View Related

Changing Connection String In SSIS Package ???

Feb 5, 2007

Hi!

I create a SSIS Package for ETL on my own machine. During development database was also on my machine. For access to this database an OLE DB connection was defined within a package in BI Development Studio. Everything worked well both in debug mode and testing package itself.

Finally I need to load data to a database on a different machine using this package.

I used several scenaries:

1) simply copied the package-file to estination machine, open it for execution, in section "Connection Managers" I edited connection string manually - changed server name and Initial Catalog. And try to execute.

2) on the destination machine I manually created an OLE DB connection (using Microsoft Data Link) to a different database (test succeded), Changed the extention of the connection file 'udl' for ' txt ' and copied its connection string to the field connection string in section "Connection Managers" (pointed in variant 1) ).

3) use Package Configurations, copied the deployment to destination machine, installed the package the way like written here - http://msdn2.microsoft.com/en-us/library/ms365338.aspx. Changed exported properties - Server name, Initial Catalog and also the whole Connection String. Also try to execute.

In all cases I recieved the same error execution message :

"Errors in the metadata manager. Either the database with ID of " OLD_DATABASE_NAME " does not exist in the server with ID of " NEW_SERVER_NAME " or the user does not have permissions to access the object."

As for access (username/pass) settings they are the same for both of them, I have the same administrative rights on both machines. And more with the same rights the ole db connection made was made manually in variant 2 - succeded!!! So I don't think the problem is here.

As for Error message - I think somewhere the OLD name of database (Initial Catalog) is saved, though I tried to change it. Though the NEW value for the server name is substituted.

Please, help me. I don't know what else can I try. And it is not a single case for my practice. So I think - something wrong in my actions.

View 9 Replies View Related

Integration Services :: SSIS Data Conversion From STRING TO DATE

Nov 30, 2015

I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?

View 10 Replies View Related

Integration Services :: How And Using Which SSIS Component To Change Empty String Value To 0

Oct 4, 2015

I have my SSIS package that reads elements from a Sharepoint list to a SQL table. The data type of my source is string and the destination is integer. The source column can sometimes be an empty string "" (not a required column)

Which expression to use and "where" or "what" SSIS component can I add this expression to? Like I know that I can use the "Conditional Split" to filter the data so for my expression which component can I use?

View 2 Replies View Related

Integration Services :: Converting String Variable To Integer In SSIS

May 20, 2015

I am trying to convert a string variable to integer in SSIS using the expression task.

@[User::Nummer] = (DT_I4) @[User::Name]

But I get an error that the conversion from (DT_WSTR) to (DT_I4) is not possible!!

View 2 Replies View Related

Integration Services :: Dynamic SIS Package Changing Source Connection At Run Time

Jul 30, 2015

I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.

View 3 Replies View Related

Integration Services :: Master SSIS Package Which Will Have Configuration

Sep 1, 2015

We have 6  SSIS packages which populates different sets of table by reading different set of excel file.We need to have a master SSIS package which will have the configuration (say xml) which consists of database connection details and file path details of child packages.what will the best way to achieve the desire results.

Package 1 use File x
package 2  use File y
package 3 use File z
....
package 6 use File a

The parent ssis package will have xml file as configuration which will store the all the six different file details for child packages along with database connection string.Is the above option feasible . or what approach will be the best possible way to achieve the results.Since the Triggering of SSIS package (Master SSIS package) will be from SQL Job

View 6 Replies View Related

Integration Services :: How To Create SSIS Package With Mails

Aug 17, 2015

I am new to SSIS. I have a requirement that from a flat file need to import the data into SQL Server DB(SQl Server2008r2).

1.When the file doesn't found in dir need to send a mail.
2.error reading And writing ,on which record the error occurred and capture the error details and need to send mail.
3. In success also need to send a mail.

View 3 Replies View Related

Integration Services :: File Rename Using SSIS Package

Apr 29, 2015

I have a SSIS package in which i will download the files through FTP from main server to my local server. The file names will be like as follows:

''EYE0001_20150428_0805_INV.TXT''
''EYE0001_20150428_0805_SL.TXT''
''EYE0001_20150428_0805_SV.TXT''

''EYE0002_20150428_0805_INV.TXT''
''EYE0002_20150428_0805_SL.TXT''
''EYE0002_20150428_0805_SV.TXT''

After the download is over from the server to my local server.i will manually rename the files into like this as below,

''EYE0001_20150429_0805_INV.TXT''
''EYE0001_20150429_0805_SL.TXT''
''EYE0001_20150429_0805_SV.TXT''

''EYE0002_20150429_0805_INV.TXT''
''EYE0002_20150429_0805_SL.TXT''
''EYE0002_20150429_0805_SV.TXT''

SO i need to automate this files renaming process through ssis package.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved