Integration Services :: Sending Mail With HTML Format In Send Mail Task
Aug 18, 2015I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 RepliesI have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 RepliesDear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
I have a Send Mail task as part of a validation process in a OnPostExecute event handler. All tasks preceding the Send Mail task get triggered and show green check mark next to them, but, for some reason, Send Mail task never gets one.
I checked the Execution Results tab and it doesn't show any indication of Send Mail task executing as a final step.
I checked the SMTP server configuration and did some test using localhost. I'm able to send as configured while using anonymous credentials.
while i was trying to execute the code for Sending an "HTML Mail Message with the Script Task" given at the link below http://msdn2.microsoft.com/en-us/library/ms403365.aspx
following error was encountered.
DTS Script Task has encountered an exception in user code:
Project namecriptTask_098956444e9f4ae195c3565569c9444b
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there
at Microsoft.SqlServer.Dts.Runtime.Variables.get_Item(Object index)
at ScriptTask_098956444e9f4ae195c3565569c9444b.ScriptMain.Main() in dts://Scripts/ScriptTask_098956444e9f4ae195c3565569c9444b/ScriptMain:line 29
please help me
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
I set up the "Send Email Task" succesfully with "SMTP Connection to myExchangeSERVER" using "Windows Authentication"
However, as we all know - you can't have html format for the Send Mail Task. BUT this piece of code straight from MSDN doesnt work for me - each time it pops up this "Mail Sent Succesfully" - but I receive NO freaking EMAILs!!! Am I missing something or is it another one of those Microsoft "gotchas" ?
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Net.Mail
Public Class ScriptMain
Public Sub Main()
Dim htmlMessageTo As String = "me.here@mydomain.com"
Dim htmlMessageFrom As String = "SSIS@mydomain.com"
Dim htmlMessageSubject As String = "SSIS Success - My Package"
Dim htmlMessageBody As String = _
Dts.Variables("User::HTMLtemplateText").Value.ToString
Dim smtpServer As String = "myExchangeSERVER"
SendMailMessage( _
htmlMessageTo, htmlMessageFrom, _
htmlMessageSubject, htmlMessageBody, _
True, smtpServer)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub SendMailMessage( _
ByVal SendTo As String, ByVal From As String, _
ByVal Subject As String, ByVal Body As String, _
ByVal IsBodyHtml As Boolean, ByVal Server As String)
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage( SendTo, From, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHtml
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.CredentialCache()
mySmtpClient.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
mySmtpClient.Send(htmlMessage)
MsgBox("Mail sent")
End Sub
i have developed a pakage which populates a two different tables with reference to the xml files added to a folder which is watched by a security WMI task.it is governed by a sequence container which contains three for each loop container for working on the different files.i have different event handlers set up inside for each loop container tasks which contains , data flow task, execute sql task, and moving the processed file to the desired destination.i want to set up a send mail task on the package level using event handler on error, where i have set up a task for looging the error to the error table , i have tried to collect all the error messages in a array list variable . and trying to use that variable a s a message source. i could not under stand if i set the propogation variable in the sequence container as false than will the onpost execute event will fire the onpostexecute event handler in the package level.if show how can i send only one email for all the errors of package with error looging.
View 6 Replies View RelatedI have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine:
Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads:
SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Any deas where this error comes from?
Is there anyway to  send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.Â
View 6 Replies View RelatedI have trying to execute the Sendmail task in my development envinorment i face this error..I have given the clear details error message below,Please have a look.
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.  System.Net.WebException: Unable to connect to the remote server  System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ".Alternatively  i use the  SMTP connection to create the subscription as well,its working properly.
Here we are accessing SMTP connection manager as Virtually.Here in my client network we are using Macafee Anti virus ,We have excluded the Rsconfigration file in the excluded list.I dont know why this problem occures again using Sendmailtask in ssis?
I have a complex SSIS package which processes excel files, does some validation, fires off some SSRS reports which produce excel files, and finally sends out emails to groups of people with the appropriate file attached.It's been working fine, until recently. Now, when it reaches the send mail task, it raises an error:
Error: An error occured with the following error message: "Could not load file or assembly 'System.web, Versio 4.0.0.0, culture=neautral, publickeytoken= b0f5f7f11d50a3a' or one of its dependancies. Not enough storage space is available to process this command. (Exception from HRESULT: 0x80070008)".
Further down the report comesÂ
Microsoft.SqlServer.Dts.Tasks.SendMailRask.SendMailTask, Microsoft.SqlServer.SendMailTask, Version=11.0.0.0, culture=neutral, PublicKeyToken=89845dcd8080cc91
This process completes normally when run in Visual Studio. It fails when run from SQL Server Agent.SQL Server Agent is currently running under my user credentials.
I need to send a mail if a file exists or not. I have wrote the code below. I need to get a mail if file exist if not available then also I need to get a mail. where as for below code mail is coming for success or failure.
  public void Main()
       {
           int a;
           if (File.Exists(@"D:a.csv"))
           {
               Dts.TaskResult = (int)ScriptResults.Success;
[Code] .....
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
I need to convert a record set to HTML and send it as e-mail. Is it possible to do this in SSIS?
View 1 Replies View RelatedI recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException  with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
View 3 Replies View RelatedI am using SQL Mail to send an email. Is there some way to send it with an HTML body?
View 1 Replies View RelatedHello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
Hi to all,
I use sqlmail to send mails to clients, but I must send a report mail in HTML format...
is possible ????
this is my code, that return a simple string and not a HTML page when I open the mail:
------------------------------------------------------------------------
------------------------------------------------------------------------
set nocount on
declare @message varchar(8000)
declare @tempmsg varchar(8000)
declare @attach varchar(255)
declare @msg_id varchar(255)
declare @subject varchar(255)
declare @status int,
@originator varchar(255),
@cc_list varchar(255),
@date varchar(255),
@originator_address varchar(255)
Set @message='<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">'
Set @message=@message + '<!-- -->'
Set @message=@message + '<HTML>'
Set @message=@message + '<HEAD>'
Set @message=@message + '<TITLE>Novità di Microsoft Italia - Anno 2 Numero # 20</TITLE>'
Set @message=@message + '<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>'
Set @message=@message + '<META content="MSHTML 5.00.2920.0" name=GENERATOR>'
Set @message=@message + '</HEAD>'
Set @message=@message + '<BODY>'
Set @message=@message + '<TABLE bgColor=#ffffff border=0 cellPadding=8 cellSpacing=0 width=600>'
Set @message=@message + '<TD vAlign=top width=220>'
Set @message=@message + '<FONT face=Verdana,Arial,Helvetica size=2 style="FONT-FAMILY: Verdana; FONT-SIZE: 11px">'
Set @message=@message + '<IMG alt="Software
gratuito" border=0 height=50 src="http://www.microsoft.com/italy/newsletter/images/sw.gif" width=180>'
Set @message=@message + '<TABLE border=0 cellPadding=0 cellSpacing=0>'
Set @message=@message + ' <TD>'
Set @message=@message + '<FONT face=Verdana,Arial,Helvetica size=2 style="FONT-FAMILY: Verdana; FONT-SIZE: 11px">'
Set @message=@message + '<A href="http://www.microsoft.it/italy/adv/jump.asp?cod=0020_wordup"> Word 2000 - Aggiornamento: protezione della stampa unione </A>'
Set @message=@message + '</FONT>'
Set @message=@message + '</TD>'
Set @message=@message + '</TABLE>'
Set @message=@message + '</BODY>'
Set @message=@message + '</HTML>'
EXEC master.dbo.xp_sendmail @recipients = 'emiliano.cecchetti@tei.ericsson.se',
@subject = 'Report',
@message = @message
---------------------------------------------------------------------------------
Thanks for any help,
Emiliano.
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task.
The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
Thanks
Radhika
hi.
View 9 Replies View RelatedHi All,
I want to use send mail task with multipal email address for that i have to use comm or ?
Thank You,
Aric
Hi There,
I have a task to send mail when the source file contains null values against id column.
I have set conditional split to split the null value rows to the different destination.Please help me how do i achieve this task when the source file contains null values against id column.
Thanks in Advance.
Hi,
I am using a Send Mail task to conclude the control flow at the load of each dimension.
My requirement is to put mail items like to,from,cc,subject etc. to be picked from a file.
The send mail task has an option of picking up the values from a file.But, I am not able to configure it properly it seems.
Can anyone suggest how to do it with a example.
Thanks in advance.
Regards,
Aman
Well I thought it should be easier but send mail task supports only windows authentication but i want to give different user id/password, is there any other way to do it except script?
Thanks
I am trying to use Send Mail Task to send an email.
In my package all that I have is a Send Mail Task
Settings:
General:
Name: Send Mail Task
Description: Send Mail Task
Mail:
SmtpConnection: SMTP Connection Manager
From: awm@company.com
To: awm@company.com
Cc: Blank
BCc: Blank
Subject: None
MessageSourceType: Direct Input
MessageSource: Testing
Priority: Normal
Attachments: Blank
Expressions:
Misc - Expression: Blank
SMTP Connection Manager Editor
Connection manager Information
Name: SMTP Connection Manager
SMTP Server: Tried both IP address and SMTP server name (mail.company.com)
Checked both windows authentication and SSL
Its simple I want my package to send an email. but it fails aagain and again.
Task Send Mail Task
Validation has started (2)
Validation is completed (2)
Start, 1:31:22 PM
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
Validation is completed
Start, 1:31:22 PM
Warning: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
Can any body advice me on this?
Hi all,
I was trying to add a send mail task at the end of myPackage. When i run package, the send mail task alone fails but the rest of the package works out fine. the error i got goes like this....
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
could anyone tell me how to get around this? also tell me how shud i add a send mail task so that i can check myself if i went wrong somewhere when i added it to my package.
Thanks n regards
Praveen kumar Dayanithi
Has anyone actually used this task successfully?
Everytime I try to use this task I get a failure with the following message:
[Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.".
where would this task have timed out?