Loading From Oledb To Excel Destination

Mar 13, 2008



Hi,

I have a simple loading to excel destination. It has 900,000 records. In 66,000+ records, i has an error



Error: 0xC0202009 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.

Error: 0xC0209029 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Excel Destination Input" (3297)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Excel Destination Input" (3297)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.

Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Excel Destination" (3286) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.

Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.

Error: 0xC02020C4 at Data Flow Task, OLE DB Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.

Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.



I assume that this is caused by the no. of records im loading since the .xls file can only contain 65,000 records.... i tried using the .xlsx file but i guess it only accepts .xls.

What's the alternative to load to excel 2005 with this numbers of records?

thanks.

cherriesh

View 1 Replies


ADVERTISEMENT

Problem On Loading Data To Db2 Destination Using Oledb In Ms-ssis.

Jan 1, 2007

hello

i am performing the ETL on the as400 db2 database using ms- dts,ssis.

i have built the connection b/w as400 and source to extract data from as400 to staging means in dataflow . when i have built the oledb connction for loading data to destination as oledb destination.then it will connct successfully to the db2 as destination but when execute the task then it not load data , and give provider error.

what can be good solution for this.

can u solve it.

rep plz.



View 2 Replies View Related

Integration Services :: Package Development For Pulling Data Into Excel Destination File From OLEDB Source

Sep 2, 2015

1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.

2. How to override the existing file in excel destination.

View 2 Replies View Related

Error When An OLEDB Source Points To An OLEDB Destination.

Oct 10, 2006

Hi all,

I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.

But i got the below error:

Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.

Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".

Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.

Error at Data Flow TaSK: There were errors during task validation.

(Microsoft.DataTransformationServices.VsIntegration)



View 5 Replies View Related

OLEDB VS SQLServer Destination

Mar 15, 2007

Hi All,

We want to take advantage of the performance benefit provided by SQL server destination in our packages. We are using a configuration variable to specify whether the SQL Server is remote or local to the packages. We are using a conditional split to redirect the process to either SQL Server destination or OLEDB destination based on the value of the variable. Is there any performance benefit in doing such a thing as it seems that the connection is made in both the paths during the runtime instead of in one particular path alone.

Thanks in advance

Kumbs

View 1 Replies View Related

Error On OLEDB Destination

Apr 10, 2008

Good day,
I'm working with SSIS on SQL Server 2005 and trying to update a table with a OLEDB Destination.
The table I'm updating does not accept Null values. I've tried to update the table in several ways.

Using a "Table or view - Fast Load " Data Access Mode. I get the can't load data due to "Null values are not accepted in field xyz"

Using SQL Command text. Used the isnull function on all null fields and the "Failure inserting into the Read Only Column xyz"

I've check the properties of the table I'm writing to. I've check my user credentials.

Can any of you shed some light on what I'm missing.

thanks

View 1 Replies View Related

Dynamic Oledb Destination

Feb 5, 2006

Hello,

I am a beginner for the SSIS and would like to know how to modify the OLDEB Destination connectionString property at run time like using "for each loop container".

My requirement is that I have a single source which would be Sql Server 2005 and my destination is in MS-Access database residing in 100 places. I do not want to manually design in the data flow to these 100 destinations.

I have all the destinations stored in a table and would like to pick these destinations from the table and loop through the same at run time by modifying destination connection string.

I have planned using dts but the for each loop container does not work through as it works with flat file connection manager , but does not go well with OLDEB connection.

Highly appreciate any help in this regard.

Regards

Sameer

View 10 Replies View Related

OLEDB Destination Question

Nov 15, 2006

Situation

I have a package with an execute SQL task that truncates the destination table as the first step in the control flow and a data flow task that reads data from a flat file and loads a sql server table.

Once in a while the package bombs because it cannot get access to the flat file. The end result is that the table is empty because the truncate runs first. Obviously, I need to address the file contention, but I was wondering how to address this issue in general since anything that causes the data flow to blow up would leave the table empty.

I would rather have the table with day old data than empty, since it is not mission critical and the users can at least look at yesterday's data as opposed to nothing.



Question

Is there a way to specify a "load replace" on the OLEDB destination? I haven't seen one and I guess it makes sense because the data flow task transformations run row by row.



The only solution that I have come up with is to have the following on the control flow:

1) data flow task which reads flat file and loads a temp table

2) execute sql task to truncate the "real" destination

3) data flow task to move data from temp table to real table.



Anyone else come up with a better way to handle this?



Thanks!!







View 3 Replies View Related

Records Are Getting Rejected During Loading Data Into OLEDB Destinations

Feb 15, 2008



During the execution of SSIS Package which is populating huge data into OLEDB Destination from OLEDB Source, then some of the records are getting rejected. Again if we are executing it twice or thrice, the rejected records are getting inserted.

Wants to know, why the records are getting rejected? Target table does not contain any constraints.

Hope to hear soon!!!!!!!!!!!!!!!!!!

View 5 Replies View Related

Oledb Destination Commit Interval

Apr 11, 2007

Hi



How can commit interval for OLE DB destination be set when the data access mode is not "fast load".

What happens in oledb destination in case of a failure in package? How does the roll back happens. I mean how is the commit point set in oledb destination? I know about the transaction options which are at the package level.



Thanks,

Vipul

View 4 Replies View Related

FastLoad OLEDB Destination With Oralce

Nov 9, 2006

Hi,

why Table or View €“ fast load option in Data Access mode is not listed when we connect Oracle Database in the OLEDB Destination.

Thanks

Jegan

View 3 Replies View Related

OLEDB Destination Task Hanging

Oct 5, 2007



Hi,

I have a strange problem, which I never encountered earlier, I have a data flow which has one source and multiple destinations, I am also using multicast and derived column transformations too, however when I run the package (either from cmd line or designer) the data flow task hangs when it comes to inserting data into the target tables. and it keeps waiting forever. Initialy I thought it was my data set , however if with very few records the problem persists. I have also tried removing the table lock from the destination , increasing the rows per batch to 10000 and commit size to 10000 but to no change. I am using the fast load option within my destination. When I run sp_who2 on my Management Studio I see that the status of all the processes is sleeping and the command is "awaiting command" , any help appreciated.

Thanks

View 4 Replies View Related

How To Map New Columns To An Oledb Destination Using Script?

Jun 29, 2006

Overview of my scenario: i have an SQL table with 10 columns. I read data off a csv flat file source and insert / update them into the sql. No problems there.

Now, after the 10th column, the columns are variable from site to site. Ie, for any customer, the first 10 columns are the same but the following 'n' number of columns can be different.

I'm already able to detect what are the 'custom' columns from the source db and can programmatically add / modify the columns to the destination sql tables when SSIS runs.

My problem now is, i have the flat file source with 'fixed' and 'custom' columns together, and my sql table is ready to receive them, but i don't have the proper column mappings in my SSIS package. I only have mappings for the 'fixed' columns.

How can i programmatically 'add' these mappings to my data source and subsequently my oledb destination?

What strategy should i use? Open for anyone's suggestions or ideas.

Thanks.

View 4 Replies View Related

OLEDB DB2 Destination Out Of Buffer Type 0 And 3

May 2, 2008



I have a dataflow in my SSIS Package that is supposed to transfer over all the rows from a SQL server table. I am selecting columns from the SQL table and there is a total of 1603 rows. I am only getting 354 rows in the DB2 destination table. I have turned on SQL logging and specifically the BufferSizeTuning option for this dataflow. in the Sysdtslog90 table I see messages about the "Rows in buffer type 0 would cause a buffer size greater than the configured maximum. There will only be 1249 rows in buffers of this type" and "Rows in buffer type 3 would cause a buffer size greater than the configured maximum. There will only be 1251 rows in buffers of this type"

I have the following set in the Dataflow properties.
DefaultMaxBufferRows = 5000
DefaultBufferSize = 10485760

The server is windows server 2003 x64, SQL Server 2005 sp1 resides on this server where the SSIS packages are running also. 12gb of ram.


Any suggestions how i can get all the rows transferred, what is Buffer Type 0 and 3? this doesnt seem like a lot of rows (1603 total) to hit a DB2 destination with.

Any settings I would need to check in the Connection Manager? I am using Native OLE DBMicrosoft OLE DB Provider for DB2.

View 4 Replies View Related

SQL Server Destination Not Loading All Rows

Jan 23, 2008

I have a SSIS package that transfers data from three SQL Server 7 servers to a SQL Server 2005 database. This package has about 30 different tables it copies. The table structures in the source database and destination tables are identical. About 25 different tables load without any issues. I have about 5 tables that load some nights without a problem. On other nights, the data transfers seem to randomly (though usually the most recent records) ignore some of the data. I have logging turned on and receive no errors. It just appears to stop loading data.

I should also mention that I truncate each destination table before begining and each table is loaded from data from each of the 13 source database (I am combining data from 13 regional database for reporting purposes). This is done using a Foreach Loop Container that updates the Server/Region connection string for each region. I am using the OLE DB Source connection to the SQL Server Destination. I have tried as well with the OLE DB Destination with the same result (and no error). I do not do any manipulation to the data on the transfer, but added a "RowCount" transformation between the source and destination and it gives the correct number of rows, but not all the rows get loaded.

View 6 Replies View Related

Programmatically Create FlatFileSource And OleDB Destination...........

Nov 8, 2006

Hi,

I am trying to programmatically in C# create FlatFileSource and OleDB Destination?

I would like your help.... How about column mapping.

I would appreciate your reply.....

View 1 Replies View Related

How To Map Columns Between Flat File And Oledb Destination

Mar 11, 2008

i am trying to load almost 15 csv files to my oledb destination can i use for each container to map the source columns dynamically to destination table during data flow task


FLAT FILE SOURCE ------------------------------------ > OLEDB DESTINATION

1.Product.csv Product Table (Different mappings between columns)
2.Depot.csv
...
....


No.of columns also differ in csv files...


P.S. : Dont ask to me to do individual data flow task for each csv files.

View 4 Replies View Related

SSIS Oledb Destination Not Writing Any Rows

Nov 20, 2007



I have a Dataflow task with oledb source that is using SqlCommand to retrieve data and oledb destination to write the source output to a table. I have access to both the source and destination databases.

The problem is the destination component is not writing any rows to the destination table eventhough the Source component is returning rows (I can see them in the Preview and the source database table as well).
I'm using "Table/View Name from Variable" for destination.

The Package executes without any errors but there is no output.

Any ideas?

Thanks.

View 7 Replies View Related

Complication - When Mapping Columns To OLEDB Destination In C#

Aug 28, 2007



Hi ,

I have a Package Consisting of the following (tried to portray the flow below)

1) OLE DB Source (Which I set the sql command for in code)


|
/
2) Rowcount Transform (Counts the Source Records)

|
/
3) Derived Column (Adds An AuditJobID ,ExecutionStartDate)


|
/
4) Conditional Split (Splits New and Updated Record - My Implementation of SCD)





/
/ /
5) Rowcount Transform (Counts the New Records) Rowcount Transform (Counts Update Records)




/
/ /
6) OLEDB Destination OLEDB Update Command

I am trying to map the columns in the "OLEDB Destination" with c# ,with the following


IDTSInput90 input = oledbDestination.InputCollection[0];

IDTSVirtualInput90 vInput = input.GetVirtualInput();

As soon as I call the input.GetVirtualInput(); method I get a com exception ,Seem that I am missing a

VirtualInputColumnCollection on the component ,but can't seem to figure out why.



When I drop the all the other components and only keep the OLEDb Source and OLEDB Destination with a flow between them , the call to input.GetVirtualInput() doe not fail with a com exception and I can mapping normally

I really need some guidance on the above.

Regards
Cedric

View 4 Replies View Related

SSIS Perfromance Issue Using Oledb Destination

Apr 11, 2007

Hi



I have a made a simple mapping connecting source and destination on SQL server on local box. I am getting ~36K rows/min as the thru put. I only want to use ole db destination data access mode as SQL query (dnt want to use fast load).



I am doing this test in order to set a bench mark for a custom component which i have developed. With this result i can figure out how much time my custom component is taking.



Experts, please let me know your views on the thru put which i am getting is it good bad or ok with the scenario i am testing and also if there are some ways to improve it.



Thanks,

Vipul

View 12 Replies View Related

Problems With Parameterized Insert SQL With OLEDB Destination

Feb 28, 2006

Hello,

I've searched around and can't find any references to the problem I'm having. I'd appreciate any ideas or input.

I'm trying to use the OLEDB Destination for an insert at the end of a long data flow. I need to parameterize the input, and for some of the columns I need to use literal values instead of parameters. It seems like this should be the most common thing in the world, but I'm at a loss to get it to work.

I type in the SQL statement just like I would with an OLEDB Command transformation, with the ? character for the appropriate columns in the VALUES clause. However, when I try to use Parse Query I get this error:

"Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command."

OK, so I start searching around for ways to set the parameter information. Nada. On the Mappings tab the parameter list is empty. I check MSDN and it says this:

"If you have entered a parameterized query by using ? as a parameter placeholder in the query text, use the Set Query Parameters dialog box to map query input parameters to package variables."

Set Query Parameters dialog box? I don't see this anywhere. What am I missing?

The options with the SQL Server Destination seem even more limited, as I don't see any way to use a SQL statement or stored procedure.

For the moment I'm going to stub this off with an OLEDB Command transformation with a downstream Trash desintation, but hopefully that's only going to be temporary.

Thanks,
Dan

View 6 Replies View Related

Dynamic Destination Flat File Loading

Jan 4, 2006

Here's what I want to do -

Dynamically load a flat file from a dynamic source table-

The source table metadata is known via the SYSOBJECTS and SYSCOLUMNS tables- I can pull the column names, type and lengths from these tables based on the table name. (my goal is pretty simple- pull data from a table in our database, and save it down to a flat file)

Would this be enough to dynamically create the destination flat file?  If so, how do I do it?

Thanks

-rob

View 3 Replies View Related

Excel Destination Appends The Excel File Everytime A Package Is Executed

Dec 18, 2006

i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated

View 2 Replies View Related

OLEDB To Flat File Destination - Comes Out In Wrong Order

Jun 8, 2007

Hello,



My OLE DB Source is getting data from the following column types:

ID varchar(50), Name varchar(100), Date datetime, Currency char(3), Cost numeric(30,10)



My OLE DB Source outputs my information in the following order when I click Preview:

ID Name Date Currency Cost



When I connect the OLE DB Sorce to a Flat File Destination, it comes out in the wrong order.When I examine the "line" between them (Data Flow Path Editor) I get:



Currency DT_STR Length: 3

ID DT_STR Lenght: 50

Name DT_STR Lenght: 100

Date DT_DBTIMESTAMP

Cost DT_NUMERIC



What is the easiest way for me to change this so the Flat File Destination will output my data in the same order as the OLE DB Source:

ID Name Date Currency Cost



Thank you very much!

View 6 Replies View Related

GetErrorDescription With Oledb Destination Fast Load Mode

Feb 11, 2007

I have an OLE-DB Command transformation that inserts a row. If the insert SQL command fails for some reason, I use the "Redirect Row" option to send the row to a script component. Inthere, I get the error description into a string variable in order to log the error into an error table.



For example, if a primary key violation arises, I would like the error description to be "The data value violates integrity constraints". I get it using the ComponentMetadata.GetErrorDescription. When I use the "table or view mode", I get the error description above without any problem. But If I use the "table or view fast load", the description is something like "No status available". But, If I use the error output to fail the component, in the OnError, I get the right error description. Is there a way to have both behaviour, I mean, to be able to redirect error rows to an output and have the cotrrect error description (like the one in OnError event handler) using fast load mode?



Thank you!

Ccote

View 5 Replies View Related

Data Flow Task - OLEDB Source / Destination

Nov 9, 2006

Hi

Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.





MA

View 4 Replies View Related

Integration Services :: SSIS - WebServices To OLEDB Destination

Oct 8, 2015

I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.

when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.

View 6 Replies View Related

Integration Services :: Using Temp Table As OleDB Destination

Jun 26, 2015

I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow, 

CREATE TABLE ##SiteTemp
    (
      LEVEL2 VARCHAR(20),
      LEVEL3  VARCHAR(25)

Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....

I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.

View 3 Replies View Related

Integration Services :: Excel Sheet Not Visible In Excel Destination

Sep 14, 2015

I have ssis package where I have excel connection manager with expression pointing to a variable which has path for location and name of excel spreadsheet to be create each with date on the name.ExcelFilePath points to variable for shared location where excel file will be saved.I have File system task for copying template excel file to destination location with date in file name.I drag and drop excel destination.  Pointed to excel connection manager. Under data access mode, I have select table and view.  When I try to select name of excel sheet,  it says, no tables or views could be loaded. I should be able to see sheetname there so that I can map column. I only have option to create new spreadsheet. I want to use template to load data in excel file. I dont want to create new sheet.  It was working before. But I opened the ssis package and its broken. I was able to see spreadsheet name before but I dont see it now even though I have not made any change to package. XCEL 12.0 XML;HDR=NO";

View 5 Replies View Related

Any Way To Check The Duplicated Rows In Destination Before Loading Data?

Jun 5, 2006

Hi. As the title, I am try to figure out how to write script to prevent duplicated rows before loading data from couple csv files to the OLE database table.
Another quick question, when I use Data Conversion to convert data from string to datetime or decimal type, it always return error like potential data loss.

View 4 Replies View Related

Errors Loading A Text File Into A Sql Server Destination

Apr 24, 2006

I am trying to load 14+ million rows from a text file into local Sql Server. I tried using Sql Server destination because it seemed to be faster, but after about 5 million rows it would always fail. See various errors below which I received while trying different variations of FirstRow/LastRow, Timeout, Table lock etc. After spending two days trying to get it to work, I switched to OLE DB Destination and it worked fine. I would like to get the Sql Server Destination working because it seems much faster, but the error messages aren't much help. Any ideas on how to fix?

Also, when I wanted to try just loading a small sample by specifying first row/last row, it would get to the upper limit and then picked up speed and looked like it kept on reading rows of the source file until it failed. I expected it to just reach the limit I set and then stop processing.

[SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".

--------------------------------
[SS_DST tlkpDNBGlobal [41234]] Error: The attempt to send a row to SQL Server failed with error code 0x80004005.
[DTS.Pipeline] Error: The ProcessInput method on component "SS_DST tlkpDNBGlobal" (41234) failed with error code 0xC02020C7. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
...
[FF_SRC DNBGlobal [6899]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.

[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.


-------
After first row/last row (from 1 to 1000000) limit is reached:
[SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".

---------------
When trying to do a MaximumCommit = 1000000. Runs up to 1000000 OK then slows down and then error.
[SS_DST tlkpDNBGlobal [41234]] Error: Unable to prepare the SSIS bulk insert for data insertion.

[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

----
When attempting all in a single batch:
[OLE_DST tlkpDNBGlobal [57133]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not allocate space for object 'dbo.SORT temporary run storage: 156362715561984' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".

View 11 Replies View Related

SQL 2012 :: SSIS - OLEdb Destination Get Success / Failure Status

Feb 19, 2015

I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS

SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination
|
update SQL table Flag column<---------------------------------|

View 9 Replies View Related

Native Error Messages In OLEDB Destination (and Hopefully Forthing ADO.NET Dest)

Jul 15, 2006

For both OLEDB destiantions (and hopefully for the forthcoming ADO.NET destination adapter) it would be useful to have the following two output columns: NativeErrorCode and NativeErrorMessage.

For SQL Server, this would allow you distiguish between multiple errors which all roll up to the SSIS error "the value violated the integrity constraints of the column", which is way too generic for proper decision making (via conditional split).

For example, like SQL Server replication, you should be able to ignore duplicate key errors (error number 2627) indicating the record existed, but error out on nullability constraint errors (number 515) in which the record could not be inserted. If you had a native error code, you could make this decision, while the SSIS error for two different native errors is precisely the same.

There is a known and accepted race condition between a lookup transform and subsequent OLEDB dest insert attempt (assuming a non-transacted container and a common component target table), which is why the 2627 can be safely ignored in certain instances, while a 515 should not be.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved