Non Trusted Domains

Is there any way to connect to SQL Server from a non trusted domain. Passthrough authentication works for other NT Server resources (like exchange folder, printers, shared folders), but SQL Server 7.0 does not seem to accept this passthrough authentication (where the username and password are the same in both domains). There is no internet access required.

View Replies


ADVERTISEMENT

DTS Between Non-trusted Domains (VPN)

I'm attempting to set up a dts transfer SQL 7 box to SQL 7 box. These two servers are on two separate NT domains with no trust relationship, and I will be sending the info across a VPN.

Anyone out there have a similar situation? Offer any recommendations, pitfalls, ports used, ways to do this??? I'd appreciate any ANY ideas on how to make this work. Thanks in advance.
-Tricia

View Replies View Related

Connecting To SQL Across Non-Trusted Domains

The problem I am having is this :
SQL Servers in a non -trusted Windows 2000 Domain (Test domain) do not show as being alive in Enterprise Manager unless you map a drive to a server in the non-trusted domain.
Has anyone seem this problem before? Not sure whether this is related to Active Directory.
Also all our SQL Instances use specific port numbers.

Thanks

View Replies View Related

Disconnection Of Trusted Users Across Domains

I have an Access 97 frontend with a Sql Server backend, I have created a number of users in Sql Server 6.5 (SP5a) and used trusted connections. The users exist on another domain so it's across domains. The users connect to Sql Server OK, but are disconnected after 20 minutes producing a "login failed" within the error log. If the users are on the same domain then they don't get disconnected. Does anybody know of a timeout under Sql Server / NT across domains or know why this is happening??????

Can somebody please help me?

Thanks
Mark Green

View Replies View Related

Linked Servers In Non-Trusted Domains

Hi,
I am trying to set up linked servers between two non-trusted domains. Has anyone done this? If so how did you setup your authentication?

Thank you for all your help,
Phil.............

View Replies View Related

Different Domains

Hi, I have two SQL servers in different domains(A and B), I cant use
the Enterprise Manager to register eachother...they show me "Sever doesnt exist" but when I use ping I can show them....
Please help me.....What can I do?

cedutang.

View Replies View Related

Domains And SQL

Hey all,
I need your help again..We are having many domains. Actually
we have created SQLgroups in sql and granted permissions in our domain.
But guys from other domains are just entering into their query analyser
and accessing the sql server..They are not at all falling under our SQLgroups.
We have given trusted connections between domains..
My question here is
Is there anyway that there should be an option to select the domain
before they log in thru query analyser? Like Nobody should enter
from their domain ...only through our domain they should enter..?
Please help me out..

Thank you
Andrew.s

View Replies View Related

Clients In Different Domains

I have situation like this:

Company with one head office and one remote office. In the two offices I have two domains with two PDCs. The two networks are connected with eachother through leased line and the routers are configured properly. The SQL Server is on the PDC in head office and "local" clients connect fine. I cannot connect from the remote office. I think that I have folowing solutions:

1. make trust relationships between two domains - it will be hard a little bit because second PDC is samba on linux

2. make all clients in remote office to be members of the head office domain - potential problems if the leased line drops

3. make all clients to log in with same account as SQL Server logs locally - stupid

4. something else - what?

Thanks in advance!
Daniel

View Replies View Related

SQL Server - Domains

Can anyone advise me?

We have three SQL Server Servers' (London, New York, Hong Kong). Currently we have three separate domains (one at each site). We are wanting to alter our network to have one global domain and are wondering whether there are any difficulties that SQL Server may experience in doing so ?

help much appreciated

P.

View Replies View Related

SQL Server - Domains

Can anyone advise me?

We have three SQL Server Servers' (London, New York, Hong Kong). Currently we have three separate domains (one at each site). We are wanting to alter our network to have one global domain and are wondering whether there are any difficulties that SQL Server may experience in doing so ?

help much appreciated

P.

View Replies View Related

How To Change Domains

I need to move three sql 6.5 servers over from one domain to another domain. What is the best way to do it and what should I look out for? I am really new at this so any help would be great.

Brian

View Replies View Related

Changing Domains

I have been informed that I will soon have to change the domain that my sql server resides in. Does anyone know if I will have to reinstall sql after this happens?

View Replies View Related

Replication Between Domains

What are the requirements to set up relplication between domains? Are the
domains required to be in a trust relationship? If not, how can transactional replication be achieved in such a scenario.

Thanks for your help
Sincerely
Ziggy

View Replies View Related

Different Domains(very Urgent)

Hi everbody,
I have two Sql server production boxs and both are in different domain.I am unable to register the server another domain server. Let me know how to register the diffrent domain server.
Thanks in Advance

View Replies View Related

Replication From Different Domains

Hello,

First

I would like to replicate databases from an SQL 2000 Server to a SQL 2005 Server.

a. First can this be done?

b. Does it matter if both servers are on different domains?

 

Secondly

If all is possible from my above questions, in order for me to enable replication on the SQL 2000 Server, i need to rename the server from LOCAL to a realname. I get an error message saying that it can not use nicknames.

a. If I go ahead and make a New SQL Server Registration, could this have a major impact on the applications using the Database server?

b. When renaming, do I first Delete the current server registration or should I first create the new one then delete the old one?

 

Thank you very much in advance

View Replies View Related

Discrete Domains In Sql

 

I have a sql-table. The domain of one of my columns a fix number of string values (like "blue", "green" and "yellow"). However, there is a big likelyhood that the domain will be expanded by more string values in the future (however, none of the existing string values will ever be discluded from the domain). How would I go about enforcing that all strings added to my column in my table is within my domain?  

Should I use a check constraint, or create a domain, or sholud a create another table with the domain values and use a foreign key? What would be best practise for my problem?

View Replies View Related

Mirroring And Domains

 
I not too hot on networking.  When I type "IPCONFIG /ALL" the "Prmary DNS Suffix" is empty.  Does this mean I have no domain?  Can I configure a mirror on this server?
 
Thanks in advance.
 

View Replies View Related

SQL Server Authentication Across Domains

Viual Studio 2003; ASP.Net; .Net Framework 1.1, SQL Server 2000Hi,We have two domains in our network - prod.domain.com and dev.domain.com. There is no trust relationship between the two domains. I am trying to connect to an SQL Server in dev.domain.com using SQL Server Authentication from prod.domain.com. My connection string uses the fully qualified domain name (xxxxxx.dev.domain.com) to connect. The error I receive is SQL Server does not exist or access denied. I can access the database through SQL Query Analyser and SQL Enterprise Manager across the domains with no problems. I can also connect through a .udl file using the same SQL Server Authentication information.If I run my application from dev.domain.com accessing a database that sits in prod.domain.com then the connection is fine.Can someone point me in the direction of any areas I can troubleshoot to see what is preventing the connection please? The only things I can see on the web are details of windows authentication across domains which isn't relevant to me in this instance. I've been pulling what little hair I have out over this for the last week.Thanks in advance.

View Replies View Related

Access To Different Databases In Different Domains

Hi everybody,there are several SQL-Server 2000 databases within a company locatedon different servers in different domains. On every database you canfind the same table X.I want to merge these tables X (UNION query) and print the result witha Crystal Report.Unfortunately I only have little knowledge on security, domains,distributed applications.Thanks for help.

View Replies View Related

SQL Server Domains/Workgroups

I have a network that has 10 machines-6 of them have sql server registrations. I am able to access all 6 from any machine while they are on the domain. However I also need to take 5 of them off of the domain to a remote site and set up a workgroup. I am able to log in to each sql server from the workgroup login but I am not able to run software on one machine that connects to a sql server registration on another machine in the workgroup. I get a "sql server does not exist or access denied" message. Further, when I open enterprise manager, the other sql servers don't show up and I am unable to add them using the wizard.

Any help would be much appreciated.

View Replies View Related

Dos Command To Copy Between 2 Domains

anybody have the syntax floating around their heads to use DOS copy between 2 domains.

i think it is something like so ...

copy C:PathToMySQLServerMSSQL.1MSSQLBackupReportSe rver* remote_host=\10.0.0.0ackup" myusername@mydomain.com;mypassword

View Replies View Related

Accessing SQL Servers Across Domains

We have installed SQL servers in 3 domains. We cannot see the servers in Enterprise manager in the other domains from any other domain. Trusted security is set up. Named pipes is the set protocol as we made no changes at install time. We can see the NT servers in the Server manager. All services are running. Is there something that I missed? Any help will appreciated.

View Replies View Related

Data Transfer Between Domains

Hello,
I have a problem scheduling an Object Transfer task on a server that is in a different domain than the server it is getting the data from. I can set up the Object Transfer through the Tools/DatabaseObject Transfer... option and run it manually (works great), but if I schedule it to run, it stops after about 30 seconds and gives an error message "Process Exit Code 1. Cannot connect to source server." Any ideas would be much appreciated. Thank you
Ryan

View Replies View Related

Merge Replication Between Different Domains

We are testing merge replication. Between servers on one domain, it works fine. Between servers on different domains, appears to work while configuring the Publisher and Push subscribers, but then errors appear after configuration. One error is that the Merge Agent could not connect to the subscriber.

The SQL Service accounts and passwords are the same on both servers. We also configured a one-way trust (maybe it is the wrong way)Subscribers trust the Publisher, and SQL service accounts added to local admin group on subscribing systems.

Anything else I should try?...modify publisher access list?

Thanks for the help.
Christi

View Replies View Related

Merge Replication Between Domains

Setting up Merge replication and push subscribers.
The snapshot agent seems to work fine, but getting an error with the Merge agent...'subscribedservername' is not configured as a subscription server. It is configured as a subscriber from the publishing server. Is there somewhere else where it needs to be defined, or do we need a domain trust?

Thanks,
C. Fischer

View Replies View Related

Data Transfer Between Domains

Hello,
I have a problem scheduling an Object Transfer task on a server that is in a different domain than the server it is getting the data from. I can set up the Object Transfer through the Tools/DatabaseObject Transfer... option and run it manually (works great), but if I schedule it to run, it stops after about 30 seconds and gives an error message "Process Exit Code 1. Cannot connect to source server." Any ideas would be much appreciated. Thank you
Ryan

View Replies View Related

SQL Server Domains/Workgroups

I have a network that has 10 machines-6 of them have sql server registrations. I am able to access all 6 from any machine while they are on the domain. However I also need to take 5 of them off of the domain to a remote site and set up a workgroup. I am able to log in to each sql server from the workgroup login but I am not able to run software on one machine that connects to a sql server registration on another machine in the workgroup. I get a "sql server does not exist or access denied" message. Further, when I open enterprise manager, the other sql servers don't show up and I am unable to add them using the wizard.

Any help would be much appreciated.

View Replies View Related

Connection In Case Of Domains

Hi
i wanna connect to a server that is installed with domain registration and using both sql and windows authentication.on this server i have created database and login for that respective database,but when i am trying to connect this server it gives me error. The login that i m using is able to connect when i m trying to connect server from console of the server.Please help me..

Chander

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved